=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.10.05 09:01:29 =~=~=~=~=~=~=~=~=~=~=~= AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22020 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 18 00 31 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015887 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976778 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114515@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129121@0] ftrace: allocating 43519 entries in 170 pages [ 0.209467@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210282@0] CPU0: update cpu_capacity 1024 [ 0.214607@0] ASID allocator initialised with 32768 entries [ 0.252589@0] secmon: can't fine clear_range [ 0.253181@0] EFI services will not be available. [ 0.256014@0] Meson chip version = RevC (25:C - 43:0) [ 0.289943@1] Detected VIPT I-cache on CPU1 [ 0.290005@1] CPU1: update cpu_capacity 1024 [ 0.290008@1] CPU1: Booted secondary processor [410fd034] [ 0.318000@2] Detected VIPT I-cache on CPU2 [ 0.318053@2] CPU2: update cpu_capacity 1024 [ 0.318055@2] CPU2: Booted secondary processor [410fd034] [ 0.346074@3] Detected VIPT I-cache on CPU3 [ 0.346124@3] CPU3: update cpu_capacity 1024 [ 0.346126@3] CPU3: Booted secondary processor [410fd034] [ 0.346215@0] Brought up 4 CPUs [ 0.385438@0] SMP: Total of 4 processors activated. [ 0.390348@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396383@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407347@0] CPU: All CPU(s) started at EL2 [ 0.408123@0] alternatives: patching kernel code [ 0.413532@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420659@0] devtmpfs: initialized [ 0.436081@0] DMI not present or invalid. [ 0.436465@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444468@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451027@0] pinctrl core: initialized pinctrl subsystem [ 0.457587@0] NET: Registered protocol family 16 [ 0.484982@3] cpuidle: using governor menu [ 0.485138@3] register canvas platform driver [ 0.487849@3] register rdma platform driver [ 0.493293@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499668@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507155@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513216@3] clkmsr: clkmsr: driver init [ 0.516976@3] codec_mm_module_init [ 0.520419@3] media_configs_system_init [ 0.524547@3] aml_watch_point_probe, in, wp:2 [ 0.529211@3] pstore: using zlib compression [ 0.533468@3] console [pstore-1] enabled [ 0.536805@3] pstore: Registered ramoops as persistent store backend [ 0.543213@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557249@3] aml_iomap: amlogic iomap probe done [ 0.561947@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563846@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572844@3] audio_clocks: audio_clocks_probe done [ 0.581459@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581514@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586680@3] amlogic auge_snd_iomap probe done [ 0.865439@3] vgaarb: loaded [ 0.865823@3] SCSI subsystem initialized [ 0.866964@3] usbcore: registered new interface driver usbfs [ 0.872420@3] usbcore: registered new interface driver hub [ 0.877948@3] usbcore: registered new device driver usb [ 0.883209@3] Linux video capture interface: v2.00 [ 0.887973@3] pps_core: LinuxPPS API ver. 1 registered [ 0.893057@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902440@3] PTP clock support registered [ 0.906945@3] dmi: Firmware registration failed. [ 0.915477@3] secmon: reserve_mem_size:0x300000 [ 0.915758@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.922702@3] secmon: get page:ffffffbf00140000, 5000 [ 0.927445@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.935823@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942559@3] fb: osd_init_module [ 0.947082@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.952618@3] Bluetooth: Core ver 2.22 [ 0.955746@3] NET: Registered protocol family 31 [ 0.960341@3] Bluetooth: HCI device and connection manager initialized [ 0.966915@3] Bluetooth: HCI socket layer initialized [ 0.971968@3] Bluetooth: L2CAP socket layer initialized [ 0.977264@3] Bluetooth: SCO socket layer initialized [ 0.990338@3] NetLabel: Initializing [ 0.990370@3] NetLabel: domain hash size = 128 [ 0.992810@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.998060@3] NetLabel: unlabeled traffic allowed by default [ 1.005510@2] clocksource: Switched to clocksource arch_sys_counter [ 1.106023@2] VFS: Disk quotas dquot_6.6.0 [ 1.106131@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.125284@2] NET: Registered protocol family 2 [ 1.126066@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.131536@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.138149@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.144757@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.150713@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.157370@2] NET: Registered protocol family 1 [ 1.162184@2] RPC: Registered named UNIX socket transport module. [ 1.167863@2] RPC: Registered udp transport module. [ 1.172739@2] RPC: Registered tcp transport module. [ 1.177636@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.185792@2] Unpacking initramfs... [ 1.287180@2] Freeing initrd memory: 2308K [ 1.288566@2] hw perfevents: clusterb_enabled = 0 [ 1.290428@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.294864@2] hw perfevents: cluster A irq = 7 [ 1.299434@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.308792@2] audit: initializing netlink subsys (disabled) [ 1.312940@2] audit: type=2000 audit(1.156:1): initialized [ 1.319597@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.340485@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.346502@2] NFS: Registering the id_resolver key type [ 1.346565@2] Key type id_resolver registered [ 1.350525@2] Key type id_legacy registered [ 1.355015@2] fuse init (API version 7.26) [ 1.363672@2] NET: Registered protocol family 38 [ 1.363717@2] Key type asymmetric registered [ 1.367751@2] Asymmetric key parser 'x509' registered [ 1.373096@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.380442@2] io scheduler noop registered (default) [ 1.385435@2] io scheduler deadline registered [ 1.390100@2] io scheduler cfq registered [ 1.404920@3] random: fast init done [ 1.404986@3] random: crng init done [ 1.405586@2] Unable to detect cache hierarchy for CPU 0 [ 1.437799@2] loop: module loaded [ 1.438747@2] zram: Added device: zram0 [ 1.439741@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.446892@2] libphy: Fixed MDIO Bus: probed [ 1.450811@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.455532@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.463136@2] PPP generic driver version 2.4.2 [ 1.466660@2] PPP BSD Compression module registered [ 1.471278@2] PPP Deflate Compression module registered [ 1.476522@2] PPP MPPE Compression module registered [ 1.481501@2] NET: Registered protocol family 24 [ 1.486267@2] usbcore: registered new interface driver asix [ 1.491849@2] usbcore: registered new interface driver ax88179_178a [ 1.498136@2] usbcore: registered new interface driver cdc_ether [ 1.504158@2] usbcore: registered new interface driver net1080 [ 1.510028@2] usbcore: registered new interface driver cdc_subset [ 1.516134@2] usbcore: registered new interface driver zaurus [ 1.521932@2] usbcore: registered new interface driver cdc_ncm [ 1.528375@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.534455@2] ehci-pci: EHCI PCI platform driver [ 1.539185@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.545515@2] ohci-pci: OHCI PCI platform driver [ 1.550688@2] usbcore: registered new interface driver cdc_acm [ 1.555984@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.564293@2] usbcore: registered new interface driver usb-storage [ 1.570544@2] usbcore: registered new interface driver usbserial [ 1.577055@0] mousedev: PS/2 mouse device common for all mice [ 1.582669@0] usbcore: registered new interface driver xpad [ 1.588070@2] i2c /dev entries driver [ 1.591654@2] usbcore: registered new interface driver uvcvideo [ 1.597453@2] USB Video Class driver (1.1.1) [ 1.601720@2] md: linear personality registered for level -1 [ 1.607917@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.617593@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.623372@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.631186@1] usbcore: registered new interface driver usbhid [ 1.635078@1] usbhid: USB HID core driver [ 1.639324@1] ashmem: initialized [ 1.642799@1] logger: created 512K log 'log_main' [ 1.647325@1] logger: created 1K log 'log_events' [ 1.652252@1] logger: created 1K log 'log_radio' [ 1.656888@1] logger: created 16K log 'log_system' [ 1.661325@1] exFAT: Version 1.3.0 [ 1.666655@1] ff803000.serial: clock gate not found [ 1.669697@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.676845@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.691831@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.694434@1] console [ttyS0] enabled [ 1.694434@1] console [ttyS0] enabled [ 1.701650@0] bootconsole [aml_uart0] disabled [ 1.701650@0] bootconsole [aml_uart0] disabled [ 1.711171@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.717594@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.727880@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.737731@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.744188@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.756591@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.760677@0] irq = 20 [ 1.763008@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.771830@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.776244@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.781454@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.787933@0] meson-remote: Driver init [ 1.791897@0] meson-remote: remote_probe [ 1.795493@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.800558@0] meson-remote ff808040.rc: don't find the node [ 1.807114@0] meson-remote ff808040.rc: led_blink = 0 [ 1.812111@0] meson-remote ff808040.rc: don't find the node [ 1.819014@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.824653@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.830356@0] meson-remote ff808040.rc: custom_number = 3 [ 1.835670@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.841354@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.848508@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.854805@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.860952@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.866620@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.873778@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.880074@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.886219@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.891891@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.899049@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.905345@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.911474@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.918197@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.923975@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.929753@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.935446@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.941138@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.947090@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.952955@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.958561@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.963908@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.969256@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.975305@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.982293@3] meson-remote: IR XMP protocol handler initialized [ 1.987929@3] efusekeynum: 4 [ 1.990442@3] efusekeyname: mac offset: 0 size: 6 [ 1.996783@3] efusekeyname: mac_bt offset: 6 size: 6 [ 2.003165@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.009550@3] efusekeyname: usid offset: 18 size: 16 [ 2.016212@2] efuse efuse: probe OK! [ 2.021883@3] ge2d: ge2d_init_module [ 2.023499@3] [tsync_pcr_init]init success. [ 2.028062@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.034522@2] DI: di_module_init ok. [ 2.037642@2] dim:dim_module_init [ 2.040879@2] dim:dim_module_init finish [ 2.044611@2] dil:dil_init. [ 2.047535@2] dil:dil_init ok. [ 2.050406@2] vdin_drv_init: major 241 [ 2.054320@2] vdin_drv_init: vdin driver init done [ 2.058809@2] [viuin..]viuin_init_module viuin module init [ 2.064630@2] [viuin..]viuin_probe probe ok. [ 2.068713@2] amlvid:info: amlvideo_init called[ 2.072775@2] amlvid:info: amlvideo_create_instance called [ 2.078196@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.083541@3] amlvideo-000: V4L2 device registered as video10 [ 2.089019@3] amlvid:info: amlvideo_create_instance called [ 2.094416@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.099741@1] amlvideo-001: V4L2 device registered as video23 [ 2.105509@1] PPMGRDRV: warn: ppmgr module init func called [ 2.111650@0] videosync_create_instance dev_s ffffffc01c985400,dev_s->dev ffffffc01c9a1800 [ 2.118949@0] videosync_create_instance reg videosync.0 [ 2.124178@0] aml_vecm_init:module init [ 2.124179@1] videosync_thread started [ 2.131903@0] amdolby_vision_init:module init [ 2.136189@0] prime_sl module init [ 2.139818@0] amlogic mtd driver init [ 2.143533@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.148760@0] bl mode descrete [ 2.151679@0] fip_copies 4 [ 2.154352@0] fip_size 0x200000 [ 2.157445@0] nand_clk_ctrl 0xffe07000 [ 2.161162@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.166795@0] nand_clk_ctrl 0xffe07000 [ 2.170492@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.178812@0] plat->aml_nand_device ffffff800a778cf8 [ 2.183359@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.189322@0] NAND device id: c2 dc 90 a2 57 3 [ 2.193518@0] NAND device: Manufacturer ID: [ 2.197563@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.204223@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.209721@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.215242@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.221543@0] mtd->oobavail: 0x10 [ 2.225440@2] aml_nand_init 2119: plat-name:bootloader [ 2.229923@2] Creating 1 MTD partitions on "bootloader": [ 2.235170@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.242642@1] bootloader initialized ok [ 2.244394@1] plat->aml_nand_device ffffff800a778cf8 [ 2.249332@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.255366@1] NAND device id: c2 dc 90 a2 57 3 [ 2.259495@1] NAND device: Manufacturer ID: [ 2.263547@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.270212@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.275706@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.281224@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.287530@1] mtd->oobavail: 0x10 [ 2.290947@1] aml_nand_init 2119: plat-name:nandnormal [ 2.295911@1] bbt_start=20 [ 2.298558@1] env_start=24 [ 2.301223@1] key_start=32 [ 2.303905@1] dtb_start=40 [ 2.306578@1] ddr_start=44 [ 2.309246@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.315727@1] get_free_node 43: bitmap=0 [ 2.319173@1] get_free_node 55: bitmap=1 [ 2.323256@1] get_free_node 43: bitmap=1 [ 2.326934@1] get_free_node 55: bitmap=3 [ 2.331019@1] get_free_node 43: bitmap=3 [ 2.334697@1] get_free_node 55: bitmap=7 [ 2.338578@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.345218@1] nbbt free list: [ 2.348151@1] blockN=21, ec=-1, dirty_flag=0 [ 2.352377@1] blockN=22, ec=-1, dirty_flag=0 [ 2.356603@1] blockN=23, ec=-1, dirty_flag=0 [ 2.360830@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.366238@1] nbbt valid addr: 500000 [ 2.369448@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.375063@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.381304@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.387713@1] get_free_node 43: bitmap=7 [ 2.391190@1] get_free_node 55: bitmap=f [ 2.395274@1] get_free_node 43: bitmap=f [ 2.398953@1] get_free_node 55: bitmap=1f [ 2.403123@1] get_free_node 43: bitmap=1f [ 2.406888@1] get_free_node 55: bitmap=3f [ 2.411057@1] get_free_node 43: bitmap=3f [ 2.414823@1] get_free_node 55: bitmap=7f [ 2.418993@1] get_free_node 43: bitmap=7f [ 2.422758@1] get_free_node 55: bitmap=ff [ 2.426928@1] get_free_node 43: bitmap=ff [ 2.430693@1] get_free_node 55: bitmap=1ff [ 2.434949@1] get_free_node 43: bitmap=1ff [ 2.438799@1] get_free_node 55: bitmap=3ff [ 2.442854@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.449494@1] nenv free list: [ 2.452419@1] blockN=25, ec=-1, dirty_flag=0 [ 2.456653@1] blockN=26, ec=-1, dirty_flag=0 [ 2.460879@1] blockN=27, ec=-1, dirty_flag=0 [ 2.465105@1] blockN=28, ec=-1, dirty_flag=0 [ 2.469332@1] blockN=29, ec=-1, dirty_flag=0 [ 2.473558@1] blockN=30, ec=-1, dirty_flag=0 [ 2.477784@1] blockN=31, ec=-1, dirty_flag=0 [ 2.482011@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.493754@1] nenv valid addr: 610000 [ 2.493774@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.498205@1] get_free_node 43: bitmap=3ff [ 2.502056@1] get_free_node 55: bitmap=7ff [ 2.506313@1] get_free_node 43: bitmap=7ff [ 2.510164@1] get_free_node 55: bitmap=fff [ 2.514420@1] get_free_node 43: bitmap=fff [ 2.518271@1] get_free_node 55: bitmap=1fff [ 2.522614@1] get_free_node 43: bitmap=1fff [ 2.526551@1] get_free_node 55: bitmap=3fff [ 2.530894@1] get_free_node 43: bitmap=3fff [ 2.534831@1] get_free_node 55: bitmap=7fff [ 2.539174@1] get_free_node 43: bitmap=7fff [ 2.543116@1] get_free_node 55: bitmap=ffff [ 2.547455@1] get_free_node 43: bitmap=ffff [ 2.551391@1] get_free_node 55: bitmap=1ffff [ 2.555820@1] get_free_node 43: bitmap=1ffff [ 2.559843@1] get_free_node 55: bitmap=3ffff [ 2.564070@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.570710@1] nkey free list: [ 2.573643@1] blockN=32, ec=-1, dirty_flag=0 [ 2.577869@1] blockN=33, ec=-1, dirty_flag=0 [ 2.582094@1] blockN=34, ec=-1, dirty_flag=0 [ 2.586321@1] blockN=35, ec=-1, dirty_flag=0 [ 2.590547@1] blockN=36, ec=-1, dirty_flag=0 [ 2.594774@1] blockN=37, ec=-1, dirty_flag=0 [ 2.599000@1] blockN=38, ec=-1, dirty_flag=0 [ 2.603226@1] blockN=39, ec=-1, dirty_flag=0 [ 2.607453@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.612541@1] nkey valid addr: fffffffffffc0000 [ 2.617026@1] aml_nand_key_check 1251 NO key exist [ 2.621771@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.628386@1] get_free_node 43: bitmap=3ffff [ 2.632208@1] get_free_node 55: bitmap=7ffff [ 2.636636@1] get_free_node 43: bitmap=7ffff [ 2.640660@1] get_free_node 55: bitmap=fffff [ 2.645088@1] get_free_node 43: bitmap=fffff [ 2.649125@1] get_free_node 55: bitmap=1fffff [ 2.653426@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.660065@1] ndtb free list: [ 2.662998@1] blockN=41, ec=-1, dirty_flag=0 [ 2.667224@1] blockN=42, ec=-1, dirty_flag=0 [ 2.671450@1] blockN=43, ec=-1, dirty_flag=0 [ 2.675677@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.693672@1] ndtb valid addr: a00000 [ 2.693691@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.698124@1] get_free_node 43: bitmap=1fffff [ 2.702234@1] get_free_node 55: bitmap=3fffff [ 2.706749@1] get_free_node 43: bitmap=3fffff [ 2.710859@1] get_free_node 55: bitmap=7fffff [ 2.715171@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.721811@1] nddr free list: [ 2.724736@1] blockN=44, ec=-1, dirty_flag=0 [ 2.728970@1] blockN=45, ec=-1, dirty_flag=0 [ 2.733197@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.738285@1] nddr valid addr: fffffffffffc0000 [ 2.742771@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.747517@1] tpl: off 16777216, size 8388608 [ 2.813787@1] Creating 7 MTD partitions on "nandnormal": [ 2.813817@1] 0x000001000000-0x000001800000 : "tpl" [ 2.821134@2] 0x000001800000-0x000001a00000 : "misc" [ 2.824734@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.829592@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.836559@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.841381@0] 0x000003b00000-0x000015300000 : "system" [ 2.880659@0] 0x000015300000-0x000020000000 : "data" [ 2.904681@0] nandnormal initialized ok [ 2.904766@0] aml_ubootenv_init: register env chardev [ 2.908328@0] aml_ubootenv_init: register env chardev OK [ 2.913361@0] amlnf_dtb_init: register dtb cdev [ 2.918057@0] amlnf_dtb_init: register dtd cdev OK [ 2.922427@0] mtd_nand_probe 267 , err = 0 [ 2.927312@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.932780@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.939570@0] unifykey: storage in base: 0xffffffc005000000 [ 2.944498@0] unifykey: storage out base: 0xffffffc005040000 [ 2.950092@0] unifykey: storage block base: 0xffffffc005080000 [ 2.955860@0] unifykey: probe done! [ 2.959760@0] unifykey: no efuse-version set, use default value: -1 [ 2.965540@0] unifykey: key unify config unifykey-num is 6 [ 2.971032@0] unifykey: key unify fact unifykey-num is 6 [ 2.976223@0] unifykey: unifykey_devno: ee00000 [ 2.980986@0] unifykey: device unifykeys created ok [ 2.985621@0] unifykey: aml_unifykeys_init done! [ 2.990402@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.997125@0] amlkaraoke init success! [ 2.999908@0] sysled: module init [ 3.003284@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.008241@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.015586@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.021908@2] amlogic rfkill init [ 3.026533@0] dmc_monitor_probe [ 3.028288@0] page_trace_module_init, create sysfs failed [ 3.033985@0] defendkey defendkey: Reserved memory is not enough! [ 3.039469@0] defendkey: probe of defendkey failed with error -22 [ 3.046474@0] usbcore: registered new interface driver snd-usb-audio [ 3.055791@0] asoc debug: aml_audio_controller_probe-130 [ 3.057550@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.062867@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.070660@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.077834@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.084213@0] aml_tdm_platform_probe(), share en = 1[ 3.088950@0] No channel mask node Channel_Mask [ 3.093739@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.099259@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.107212@0] aml_tdm_platform_probe(), share en = 1[ 3.111722@0] No channel mask node Channel_Mask [ 3.116460@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.122025@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.129957@0] aml_tdm_platform_probe(), share en = 1[ 3.134487@0] No channel mask node Channel_Mask [ 3.140078@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.147141@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.155226@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.165105@3] Register vad [ 3.166319@3] check whether to update sound card init data [ 3.172120@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.179097@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.186416@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.192045@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.199697@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.207021@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.212902@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.219382@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.226501@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.232439@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.239274@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.245134@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.251875@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.259522@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.266690@2] snd_card_add_kcontrols card:ffffffc01d93f818 [ 3.271768@2] effect_v2 is not init [ 3.275165@2] Failed to add VAD controls [ 3.279394@2] GACT probability NOT on [ 3.282697@2] Mirror/redirect action on [ 3.286469@2] u32 classifier [ 3.289294@2] Actions configured [ 3.292845@2] Netfilter messages via NETLINK v0.30. [ 3.297941@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.304121@2] ctnetlink v0.93: registering with nfnetlink. [ 3.309865@3] xt_time: kernel timezone is -0000 [ 3.313829@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.320023@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.325048@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.330596@3] Initializing XFRM netlink socket [ 3.335574@3] NET: Registered protocol family 10 [ 3.340747@3] mip6: Mobile IPv6 [ 3.342655@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.348464@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.355468@3] NET: Registered protocol family 17 [ 3.358802@3] NET: Registered protocol family 15 [ 3.363358@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.376462@3] Bluetooth: RFCOMM TTY layer initialized [ 3.381352@3] Bluetooth: RFCOMM socket layer initialized [ 3.386630@3] Bluetooth: RFCOMM ver 1.11 [ 3.390486@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.395911@3] Bluetooth: BNEP filters: protocol multicast [ 3.401263@3] Bluetooth: BNEP socket layer initialized [ 3.406348@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.412388@3] Bluetooth: HIDP socket layer initialized [ 3.417588@3] l2tp_core: L2TP core driver, V2.0 [ 3.421976@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.426873@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.432597@3] l2tp_netlink: L2TP netlink interface [ 3.437359@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.443407@3] l2tp_debugfs: L2TP debugfs support [ 3.447919@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.454525@3] NET: Registered protocol family 35 [ 3.459282@3] Key type dns_resolver registered [ 3.464458@3] Registered swp emulation handler [ 3.467869@3] Registered cp15_barrier emulation handler [ 3.473025@3] Registered setend emulation handler [ 3.477778@3] disable EAS feature [ 3.481840@3] registered taskstats version 1 [ 3.494562@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.000781@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.000840@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.008974@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.017457@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.024284@0] hub 1-0:1.0: USB hub found [ 4.027361@0] hub 1-0:1.0: 1 port detected [ 4.031721@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.036970@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.044789@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.053715@3] hub 2-0:1.0: USB hub found [ 4.056829@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.064147@3] usb usb2: Unsupported the hub [ 4.068602@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.076682@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.185149@2] dwc_otg: Core Release: 3.10a [ 4.185231@2] dwc_otg: Setting default values for core params [ 4.189348@2] dwc_otg: curmode: 0, host_only: 0 [ 4.206150@2] dwc_otg: Using Buffer DMA mode [ 4.206173@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.210056@2] dwc_otg: Working on port type = SLAVE [ 4.214895@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.221937@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.231026@0] gxbb_pm: enter meson_pm_probe! [ 4.231064@0] no vddio3v3_en pin[ 4.232705@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.237759@0] gxbb_pm: meson_pm_probe done [ 4.24213: 4.248435@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.253820@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.462268@0] ubi0: attaching mtd6 [ 4.990552@0] ubi0: scanning is finished [ 4.994736@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.995024@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.002036@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.008921@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.015986@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.022199@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.029527@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.038760@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.048168@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.053921@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2005 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.098467@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.100397@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.110423@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.121195@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.127139@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.314915@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.375726@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.460262@1] ubi1: attaching mtd7 [ 5.786552@1] ubi1: scanning is finished [ 5.790409@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.790551@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.797562@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.804448@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.811513@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.817640@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.824968@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.834203@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.843523@1] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.852844@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.876566@0] UBIFS (ubi1:0): recovery needed [ 5.926480@3] UBIFS (ubi1:0): recovery completed [ 5.926641@3] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.932819@3] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.942813@3] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.953507@3] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.960236@3] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bc5450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.989880@0] aml_tdm_open [ 7.000273@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.000311@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.007116@0] aml_tdm_open [ 7.008490@0] Not init audio effects Opened TCP tuning i[ 7.015444@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.019357@1] cpufreq_interactive: no need to active hmp boost! nterface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.105798@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.109357@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.115688@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.164238@1] asoc-aml-card auge_sound: tdm playback enable [ 8.609762@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.279072@1] asoc-aml-card auge_sound: tdm playback stop [ 13.279291@3] asoc-aml-card auge_sound: tdm capture stop [ 13.284225@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.276558@3] mtd_nand_reboot_notifier 35 [ 15.276822@3] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.284832@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.288484@3] usb usb2: USB disconnect, device number 1 [ 15.297835@2] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.299011@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.304225@2] usb usb1: USB disconnect, device number 1 [ 15.310227@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.329518@0] reboot: Restarting system [ 15.329563@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21791 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 19 02 31 27 0e 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015880 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975553 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016839@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106555@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209531@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214670@0] ASID allocator initialised with 32768 entries [ 0.252648@0] secmon: can't fine clear_range [ 0.253234@0] EFI services will not be available. [ 0.256075@0] Meson chip version = RevC (25:C - 43:0) [ 0.289999@1] Detected VIPT I-cache on CPU1 [ 0.290061@1] CPU1: update cpu_capacity 1024 [ 0.290064@1] CPU1: Booted secondary processor [410fd034] [ 0.318060@2] Detected VIPT I-cache on CPU2 [ 0.318112@2] CPU2: update cpu_capacity 1024 [ 0.318114@2] CPU2: Booted secondary processor [410fd034] [ 0.346127@3] Detected VIPT I-cache on CPU3 [ 0.346177@3] CPU3: update cpu_capacity 1024 [ 0.346179@3] CPU3: Booted secondary processor [410fd034] [ 0.346270@0] Brought up 4 CPUs [ 0.385490@0] SMP: Total of 4 processors activated. [ 0.390400@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396435@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407395@0] CPU: All CPU(s) started at EL2 [ 0.408175@0] alternatives: patching kernel code [ 0.413583@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420712@0] devtmpfs: initialized [ 0.436151@0] DMI not present or invalid. [ 0.436536@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444536@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451098@0] pinctrl core: initialized pinctrl subsystem [ 0.457704@0] NET: Registered protocol family 16 [ 0.481026@2] cpuidle: using governor menu [ 0.481183@2] register canvas platform driver [ 0.483894@2] register rdma platform driver [ 0.489362@2] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495730@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503191@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509325@2] clkmsr: clkmsr: driver init [ 0.513019@2] codec_mm_module_init [ 0.516460@2] media_configs_system_init [ 0.520598@2] aml_watch_point_probe, in, wp:2 [ 0.526139@2] pstore: using zlib compression [ 0.529510@2] console [pstore-1] enabled [ 0.532850@2] pstore: Registered ramoops as persistent store backend [ 0.539259@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553308@2] aml_iomap: amlogic iomap probe done [ 0.558003@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559908@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568897@2] audio_clocks: audio_clocks_probe done [ 0.577562@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577617@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582787@2] amlogic auge_snd_iomap probe done [ 0.857949@2] vgaarb: loaded [ 0.858357@2] SCSI subsystem initialized [ 0.859476@2] usbcore: registered new interface driver usbfs [ 0.864930@2] usbcore: registered new interface driver hub [ 0.870461@2] usbcore: registered new device driver usb [ 0.875740@2] Linux video capture interface: v2.00 [ 0.880484@2] pps_core: LinuxPPS API ver. 1 registered [ 0.885570@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894957@2] PTP clock support registered [ 0.899453@2] dmi: Firmware registration failed. [ 0.904093@2] secmon: reserve_mem_size:0x300000 [ 0.908295@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.915217@2] secmon: get page:ffffffbf00140000, 5000 [ 0.919946@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928340@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935070@2] fb: osd_init_module [ 0.939587@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.945129@2] Bluetooth: Core ver 2.22 [ 0.948259@2] NET: Registered protocol family 31 [ 0.952858@2] Bluetooth: HCI device and connection manager initialized [ 0.959410@2] Bluetooth: HCI socket layer initialized [ 0.964481@2] Bluetooth: L2CAP socket layer initialized [ 0.969767@2] Bluetooth: SCO socket layer initialized [ 0.975361@2] NetLabel: Initializing [ 0.978377@2] NetLabel: domain hash size = 128 [ 0.983023@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988179@2] NetLabel: unlabeled traffic allowed by default [ 0.995582@2] clocksource: Switched to clocksource arch_sys_counter [ 1.096121@2] VFS: Disk quotas dquot_6.6.0 [ 1.096221@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115162@0] NET: Registered protocol family 2 [ 1.115926@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121410@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.128052@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134640@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140595@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147253@0] NET: Registered protocol family 1 [ 1.152070@0] RPC: Registered named UNIX socket transport module. [ 1.157740@0] RPC: Registered udp transport module. [ 1.162622@0] RPC: Registered tcp transport module. [ 1.167523@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175535@0] Unpacking initramfs... [ 1.277094@0] Freeing initrd memory: 2308K [ 1.278491@0] hw perfevents: clusterb_enabled = 0 [ 1.280443@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.284806@0] hw perfevents: cluster A irq = 7 [ 1.289314@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298695@0] audit: initializing netlink subsys (disabled) [ 1.302849@0] audit: type=2000 audit(1.148:1): initialized [ 1.309477@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330446@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.336460@0] NFS: Registering the id_resolver key type [ 1.336522@0] Key type id_resolver registered [ 1.340498@0] Key type id_legacy registered [ 1.344980@0] fuse init (API version 7.26) [ 1.353653@0] NET: Registered protocol family 38 [ 1.353699@0] Key type asymmetric registered [ 1.357714@0] Asymmetric key parser 'x509' registered [ 1.363076@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370445@0] io scheduler noop registered (default) [ 1.375380@0] io scheduler deadline registered [ 1.380086@0] io scheduler cfq registered [ 1.394810@2] random: fast init done [ 1.394876@2] random: crng init done [ 1.395404@0] Unable to detect cache hierarchy for CPU 0 [ 1.431656@0] loop: module loaded [ 1.432614@0] zram: Added device: zram0 [ 1.433529@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.440829@0] libphy: Fixed MDIO Bus: probed [ 1.444671@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.449383@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.456991@0] PPP generic driver version 2.4.2 [ 1.460515@0] PPP BSD Compression module registered [ 1.465137@0] PPP Deflate Compression module registered [ 1.470383@0] PPP MPPE Compression module registered [ 1.475356@0] NET: Registered protocol family 24 [ 1.480137@0] usbcore: registered new interface driver asix [ 1.485717@0] usbcore: registered new interface driver ax88179_178a [ 1.492003@0] usbcore: registered new interface driver cdc_ether [ 1.498022@0] usbcore: registered new interface driver net1080 [ 1.503872@0] usbcore: registered new interface driver cdc_subset [ 1.510003@0] usbcore: registered new interface driver zaurus [ 1.515793@0] usbcore: registered new interface driver cdc_ncm [ 1.522247@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.528316@0] ehci-pci: EHCI PCI platform driver [ 1.533045@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.539357@0] ohci-pci: OHCI PCI platform driver [ 1.544546@0] usbcore: registered new interface driver cdc_acm [ 1.549839@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.558144@0] usbcore: registered new interface driver usb-storage [ 1.564412@0] usbcore: registered new interface driver usbserial [ 1.570875@0] mousedev: PS/2 mouse device common for all mice [ 1.576454@0] usbcore: registered new interface driver xpad [ 1.581908@0] i2c /dev entries driver [ 1.585506@0] usbcore: registered new interface driver uvcvideo [ 1.591305@0] USB Video Class driver (1.1.1) [ 1.595577@0] md: linear personality registered for level -1 [ 1.601773@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.611420@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.617254@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.625050@2] usbcore: registered new interface driver usbhid [ 1.628942@2] usbhid: USB HID core driver [ 1.633193@1] ashmem: initialized [ 1.636697@2] logger: created 512K log 'log_main' [ 1.641196@1] logger: created 1K log 'log_events' [ 1.645903@2] logger: created 1K log 'log_radio' [ 1.650586@1] logger: created 16K log 'log_system' [ 1.655179@1] exFAT: Version 1.3.0 [ 1.660133@2] ff803000.serial: clock gate not found [ 1.663515@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.670728@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.685689@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.688277@2] console [ttyS0] enabled [ 1.688277@2] console [ttyS0] enabled [ 1.695491@2] bootconsole [aml_uart0] disabled [ 1.695491@2] bootconsole [aml_uart0] disabled [ 1.704977@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.711431@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.721694@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.731544@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.738037@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.750473@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.754532@1] irq = 20 [ 1.756877@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.765641@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.770113@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.775329@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.781798@1] meson-remote: Driver init [ 1.785749@1] meson-remote: remote_probe [ 1.789353@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.794423@1] meson-remote ff808040.rc: don't find the node [ 1.800969@1] meson-remote ff808040.rc: led_blink = 0 [ 1.805967@1] meson-remote ff808040.rc: don't find the node [ 1.812870@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.818510@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.824211@1] meson-remote ff808040.rc: custom_number = 3 [ 1.829530@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.835212@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.842367@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.848662@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.854808@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.860478@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.867635@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.873931@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.880076@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.885748@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.892906@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.899202@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.905331@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.912054@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.917832@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.923610@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.929303@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.934995@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.940947@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.946812@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.952418@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.957771@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.963113@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.969179@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.976235@3] meson-remote: IR XMP protocol handler initialized [ 1.981779@3] efusekeynum: 4 [ 1.984300@3] efusekeyname: mac offset: 0 size: 6 [ 1.990641@3] efusekeyname: mac_bt offset: 6 size: 6 [ 1.997021@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.003413@3] efusekeyname: usid offset: 18 size: 16 [ 2.010160@2] efuse efuse: probe OK! [ 2.015677@1] ge2d: ge2d_init_module [ 2.017384@1] [tsync_pcr_init]init success. [ 2.021913@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.028411@1] DI: di_module_init ok. [ 2.031441@1] dim:dim_module_init [ 2.034790@1] dim:dim_module_init finish [ 2.038433@1] dil:dil_init. [ 2.041428@1] dil:dil_init ok. [ 2.044258@1] vdin_drv_init: major 241 [ 2.048194@1] vdin_drv_init: vdin driver init done [ 2.052666@1] [viuin..]viuin_init_module viuin module init [ 2.058481@1] [viuin..]viuin_probe probe ok. [ 2.062567@1] amlvid:info: amlvideo_init called[ 2.066636@1] amlvid:info: amlvideo_create_instance called [ 2.072051@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.077509@2] amlvideo-000: V4L2 device registered as video10 [ 2.082848@2] amlvid:info: amlvideo_create_instance called [ 2.088268@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.093591@0] amlvideo-001: V4L2 device registered as video23 [ 2.099362@0] PPMGRDRV: warn: ppmgr module init func called [ 2.105644@0] videosync_create_instance dev_s ffffffc01c91f400,dev_s->dev ffffffc01c937c00 [ 2.112797@0] videosync_create_instance reg videosync.0 [ 2.118027@0] aml_vecm_init:module init [ 2.118030@2] videosync_thread started [ 2.125765@0] amdolby_vision_init:module init [ 2.130060@0] prime_sl module init [ 2.133690@0] amlogic mtd driver init [ 2.137386@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.142628@0] bl mode descrete [ 2.145536@0] fip_copies 4 [ 2.148207@0] fip_size 0x200000 [ 2.151302@0] nand_clk_ctrl 0xffe07000 [ 2.155021@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.160650@0] nand_clk_ctrl 0xffe07000 [ 2.164355@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.172670@0] plat->aml_nand_device ffffff800a778cf8 [ 2.177198@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.183176@0] NAND device id: c2 dc 90 a2 57 3 [ 2.187373@0] NAND device: Manufacturer ID: [ 2.191420@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.198080@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.203577@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.209099@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.215401@0] mtd->oobavail: 0x10 [ 2.219004@0] aml_nand_init 2119: plat-name:bootloader [ 2.223767@0] Creating 1 MTD partitions on "bootloader": [ 2.229027@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.236439@1] bootloader initialized ok [ 2.238252@1] plat->aml_nand_device ffffff800a778cf8 [ 2.243211@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.249232@1] NAND device id: c2 dc 90 a2 57 3 [ 2.253360@1] NAND device: Manufacturer ID: [ 2.257400@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.264067@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.269565@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.275082@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.281383@1] mtd->oobavail: 0x10 [ 2.284863@1] aml_nand_init 2119: plat-name:nandnormal [ 2.289769@1] bbt_start=20 [ 2.292416@1] env_start=24 [ 2.295080@1] key_start=32 [ 2.297775@1] dtb_start=40 [ 2.300435@1] ddr_start=44 [ 2.303104@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.309591@1] get_free_node 43: bitmap=0 [ 2.313029@1] get_free_node 55: bitmap=1 [ 2.317113@1] get_free_node 43: bitmap=1 [ 2.320791@1] get_free_node 55: bitmap=3 [ 2.324876@1] get_free_node 43: bitmap=3 [ 2.328553@1] get_free_node 55: bitmap=7 [ 2.332435@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.339075@1] nbbt free list: [ 2.342008@1] blockN=21, ec=-1, dirty_flag=0 [ 2.346234@1] blockN=22, ec=-1, dirty_flag=0 [ 2.350461@1] blockN=23, ec=-1, dirty_flag=0 [ 2.354687@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.360100@1] nbbt valid addr: 500000 [ 2.363305@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.368921@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.375161@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.381570@1] get_free_node 43: bitmap=7 [ 2.385047@1] get_free_node 55: bitmap=f [ 2.389131@1] get_free_node 43: bitmap=f [ 2.392810@1] get_free_node 55: bitmap=1f [ 2.396980@1] get_free_node 43: bitmap=1f [ 2.400745@1] get_free_node 55: bitmap=3f [ 2.404915@1] get_free_node 43: bitmap=3f [ 2.408680@1] get_free_node 55: bitmap=7f [ 2.412850@1] get_free_node 43: bitmap=7f [ 2.416615@1] get_free_node 55: bitmap=ff [ 2.420786@1] get_free_node 43: bitmap=ff [ 2.424550@1] get_free_node 55: bitmap=1ff [ 2.428806@1] get_free_node 43: bitmap=1ff [ 2.432657@1] get_free_node 55: bitmap=3ff [ 2.436717@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.443351@1] nenv free list: [ 2.446284@1] blockN=25, ec=-1, dirty_flag=0 [ 2.450510@1] blockN=26, ec=-1, dirty_flag=0 [ 2.454736@1] blockN=27, ec=-1, dirty_flag=0 [ 2.458963@1] blockN=28, ec=-1, dirty_flag=0 [ 2.463189@1] blockN=29, ec=-1, dirty_flag=0 [ 2.467415@1] blockN=30, ec=-1, dirty_flag=0 [ 2.471642@1] blockN=31, ec=-1, dirty_flag=0 [ 2.475868@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.487615@1] nenv valid addr: 610000 [ 2.487635@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.492062@1] get_free_node 43: bitmap=3ff [ 2.495913@1] get_free_node 55: bitmap=7ff [ 2.500170@1] get_free_node 43: bitmap=7ff [ 2.504020@1] get_free_node 55: bitmap=fff [ 2.508277@1] get_free_node 43: bitmap=fff [ 2.512128@1] get_free_node 55: bitmap=1fff [ 2.516471@1] get_free_node 43: bitmap=1fff [ 2.520408@1] get_free_node 55: bitmap=3fff [ 2.524751@1] get_free_node 43: bitmap=3fff [ 2.528688@1] get_free_node 55: bitmap=7fff [ 2.533031@1] get_free_node 43: bitmap=7fff [ 2.536968@1] get_free_node 55: bitmap=ffff [ 2.541311@1] get_free_node 43: bitmap=ffff [ 2.545248@1] get_free_node 55: bitmap=1ffff [ 2.549677@1] get_free_node 43: bitmap=1ffff [ 2.553701@1] get_free_node 55: bitmap=3ffff [ 2.557927@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.564567@1] nkey free list: [ 2.567492@1] blockN=32, ec=-1, dirty_flag=0 [ 2.571726@1] blockN=33, ec=-1, dirty_flag=0 [ 2.575952@1] blockN=34, ec=-1, dirty_flag=0 [ 2.580178@1] blockN=35, ec=-1, dirty_flag=0 [ 2.584405@1] blockN=36, ec=-1, dirty_flag=0 [ 2.588631@1] blockN=37, ec=-1, dirty_flag=0 [ 2.592857@1] blockN=38, ec=-1, dirty_flag=0 [ 2.597083@1] blockN=39, ec=-1, dirty_flag=0 [ 2.601310@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.606398@1] nkey valid addr: fffffffffffc0000 [ 2.610883@1] aml_nand_key_check 1251 NO key exist [ 2.615632@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.622243@1] get_free_node 43: bitmap=3ffff [ 2.626064@1] get_free_node 55: bitmap=7ffff [ 2.630493@1] get_free_node 43: bitmap=7ffff [ 2.634517@1] get_free_node 55: bitmap=fffff [ 2.638946@1] get_free_node 43: bitmap=fffff [ 2.642971@1] get_free_node 55: bitmap=1fffff [ 2.647281@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.653922@1] ndtb free list: [ 2.656855@1] blockN=41, ec=-1, dirty_flag=0 [ 2.661081@1] blockN=42, ec=-1, dirty_flag=0 [ 2.665307@1] blockN=43, ec=-1, dirty_flag=0 [ 2.669534@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.687516@1] ndtb valid addr: a00000 [ 2.687536@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.691964@1] get_free_node 43: bitmap=1fffff [ 2.696073@1] get_free_node 55: bitmap=3fffff [ 2.700589@1] get_free_node 43: bitmap=3fffff [ 2.704699@1] get_free_node 55: bitmap=7fffff [ 2.709011@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.715651@1] nddr free list: [ 2.718576@1] blockN=44, ec=-1, dirty_flag=0 [ 2.722810@1] blockN=45, ec=-1, dirty_flag=0 [ 2.727037@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.732125@1] nddr valid addr: fffffffffffc0000 [ 2.736610@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.741356@1] tpl: off 16777216, size 8388608 [ 2.807722@1] Creating 7 MTD partitions on "nandnormal": [ 2.807751@1] 0x000001000000-0x000001800000 : "tpl" [ 2.815060@3] 0x000001800000-0x000001a00000 : "misc" [ 2.819055@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.823682@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.830479@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.835260@3] 0x000003b00000-0x000015300000 : "system" [ 2.874459@3] 0x000015300000-0x000020000000 : "data" [ 2.897909@3] nandnormal initialized ok [ 2.898003@3] aml_ubootenv_init: register env chardev [ 2.901389@3] aml_ubootenv_init: register env chardev OK [ 2.906588@3] amlnf_dtb_init: register dtb cdev [ 2.911092@3] amlnf_dtb_init: register dtd cdev OK [ 2.915654@3] mtd_nand_probe 267 , err = 0 [ 2.920358@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.925978@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.932792@3] unifykey: storage in base: 0xffffffc005000000 [ 2.937736@3] unifykey: storage out base: 0xffffffc005040000 [ 2.943311@3] unifykey: storage block base: 0xffffffc005080000 [ 2.949091@3] unifykey: probe done! [ 2.952988@3] unifykey: no efuse-version set, use default value: -1 [ 2.958769@3] unifykey: key unify config unifykey-num is 6 [ 2.964223@3] unifykey: key unify fact unifykey-num is 6 [ 2.969449@3] unifykey: unifykey_devno: ee00000 [ 2.974205@3] unifykey: device unifykeys created ok [ 2.978844@3] unifykey: aml_unifykeys_init done! [ 2.983630@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.989960@3] amlkaraoke init success! [ 2.993118@3] sysled: module init [ 2.996597@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.001472@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.008608@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.015135@1] amlogic rfkill init [ 3.019790@0] dmc_monitor_probe [ 3.021509@0] page_trace_module_init, create sysfs failed [ 3.027172@0] defendkey defendkey: Reserved memory is not enough! [ 3.032698@0] defendkey: probe of defendkey failed with error -22 [ 3.039747@0] usbcore: registered new interface driver snd-usb-audio [ 3.048936@0] asoc debug: aml_audio_controller_probe-130 [ 3.050785@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.056103@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.063888@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.071060@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.077436@0] aml_tdm_platform_probe(), share en = 1[ 3.082173@0] No channel mask node Channel_Mask [ 3.086963@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.092485@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.100451@0] aml_tdm_platform_probe(), share en = 1[ 3.104948@0] No channel mask node Channel_Mask [ 3.109672@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.115249@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.123213@0] aml_tdm_platform_probe(), share en = 1[ 3.127722@0] No channel mask node Channel_Mask [ 3.133312@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.140374@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.148453@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.158533@0] Register vad [ 3.159513@0] check whether to update sound card init data [ 3.165375@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.172326@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.179641@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.185247@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.192924@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.200247@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.206128@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.212607@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.219701@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.225657@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.232594@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.238371@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.245125@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.253512@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.259995@0] snd_card_add_kcontrols card:ffffffc01c95c818 [ 3.264966@0] effect_v2 is not init [ 3.268396@0] Failed to add VAD controls [ 3.272631@0] GACT probability NOT on [ 3.275924@0] Mirror/redirect action on [ 3.279692@0] u32 classifier [ 3.282521@0] Actions configured [ 3.286071@0] Netfilter messages via NETLINK v0.30. [ 3.291156@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.297357@0] ctnetlink v0.93: registering with nfnetlink. [ 3.303064@0] xt_time: kernel timezone is -0000 [ 3.307068@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.313227@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.318265@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.323823@0] Initializing XFRM netlink socket [ 3.328813@0] NET: Registered protocol family 10 [ 3.334037@0] mip6: Mobile IPv6 [ 3.335900@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.341682@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.348696@0] NET: Registered protocol family 17 [ 3.352028@0] NET: Registered protocol family 15 [ 3.356583@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.369684@0] Bluetooth: RFCOMM TTY layer initialized [ 3.374590@0] Bluetooth: RFCOMM socket layer initialized [ 3.379857@0] Bluetooth: RFCOMM ver 1.11 [ 3.383715@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.389136@0] Bluetooth: BNEP filters: protocol multicast [ 3.394491@0] Bluetooth: BNEP socket layer initialized [ 3.399573@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.405620@0] Bluetooth: HIDP socket layer initialized [ 3.410778@0] l2tp_core: L2TP core driver, V2.0 [ 3.415201@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.420100@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.425829@0] l2tp_netlink: L2TP netlink interface [ 3.430584@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.436607@0] l2tp_debugfs: L2TP debugfs support [ 3.441146@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.447746@0] NET: Registered protocol family 35 [ 3.452515@0] Key type dns_resolver registered [ 3.457677@0] Registered swp emulation handler [ 3.461091@0] Registered cp15_barrier emulation handler [ 3.466254@0] Registered setend emulation handler [ 3.470978@0] disable EAS feature [ 3.475014@2] registered taskstats version 1 [ 3.487865@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.994073@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.994132@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.002264@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.010744@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.017648@3] hub 1-0:1.0: USB hub found [ 4.020652@3] hub 1-0:1.0: 1 port detected [ 4.024996@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.030259@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.038075@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.046965@0] hub 2-0:1.0: USB hub found [ 4.050152@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.057464@0] usb usb2: Unsupported the hub [ 4.061886@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.069978@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.178557@3] dwc_otg: Core Release: 3.10a [ 4.178633@3] dwc_otg: Setting default values for core params [ 4.182757@3] dwc_otg: curmode: 0, host_only: 0 [ 4.199552@3] dwc_otg: Using Buffer DMA mode [ 4.199584@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.203448@3] dwc_otg: Working on port type = SLAVE [ 4.208289@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.215348@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.224718@0] gxbb_pm: enter meson_pm_probe! [ 4.224757@0] no vddio3v3_en pin[ 4.226399@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.231478@0] gxbb_pm: meson_pm_probe done [ 4.23585S 4.242101@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.247509@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.457915@1] ubi0: attaching mtd6 [ 4.986269@1] ubi0: scanning is finished [ 4.990421@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.990710@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.997752@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.004607@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.011688@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.017885@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.025213@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.034445@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.043906@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.049538@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.094238@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.096217@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.106180@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.116957@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.122910@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301141@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.362098@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.446166@1] ubi1: attaching mtd7 [ 5.772579@1] ubi1: scanning is finished [ 5.776388@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776576@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783591@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790473@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797538@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803665@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810993@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.820226@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829548@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.838808@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.862473@0] UBIFS (ubi1:0): recovery needed [ 5.913916@0] UBIFS (ubi1:0): recovery completed [ 5.914079@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.920262@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.930254@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.940947@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.947676@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f30cf450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.978887@3] aml_tdm_open [ 6.990323@3] asoc-aml-card auge_sound: tdm prepare capture [ 6.990364@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.996870@3] aml_tdm_open [ 6.998543@3] Not init audio effects Opened TCP tuning in[ 7.005630@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.009493@0] cpufreq_interactive: no need to active hmp boost! terface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.096286@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.099932@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.106252@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.154917@1] asoc-aml-card auge_sound: tdm playback enable [ 8.608844@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22018 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0c 3f 19 01 31 27 0e 40 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975676 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016837@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209474@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210281@0] CPU0: update cpu_capacity 1024 [ 0.214607@0] ASID allocator initialised with 32768 entries [ 0.252580@0] secmon: can't fine clear_range [ 0.253166@0] EFI services will not be available. [ 0.256016@0] Meson chip version = RevC (25:C - 43:0) [ 0.289935@1] Detected VIPT I-cache on CPU1 [ 0.289997@1] CPU1: update cpu_capacity 1024 [ 0.289999@1] CPU1: Booted secondary processor [410fd034] [ 0.317989@2] Detected VIPT I-cache on CPU2 [ 0.318042@2] CPU2: update cpu_capacity 1024 [ 0.318044@2] CPU2: Booted secondary processor [410fd034] [ 0.346055@3] Detected VIPT I-cache on CPU3 [ 0.346105@3] CPU3: update cpu_capacity 1024 [ 0.346107@3] CPU3: Booted secondary processor [410fd034] [ 0.346197@0] Brought up 4 CPUs [ 0.385420@0] SMP: Total of 4 processors activated. [ 0.390329@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396365@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407322@0] CPU: All CPU(s) started at EL2 [ 0.408105@0] alternatives: patching kernel code [ 0.413511@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420638@0] devtmpfs: initialized [ 0.436086@0] DMI not present or invalid. [ 0.436471@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444466@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451027@0] pinctrl core: initialized pinctrl subsystem [ 0.457579@0] NET: Registered protocol family 16 [ 0.484970@3] cpuidle: using governor menu [ 0.485125@3] register canvas platform driver [ 0.487841@3] register rdma platform driver [ 0.493303@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499645@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507141@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513208@3] clkmsr: clkmsr: driver init [ 0.516968@3] codec_mm_module_init [ 0.520408@3] media_configs_system_init [ 0.524544@3] aml_watch_point_probe, in, wp:2 [ 0.529190@3] pstore: using zlib compression [ 0.533462@3] console [pstore-1] enabled [ 0.536796@3] pstore: Registered ramoops as persistent store backend [ 0.543203@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557256@3] aml_iomap: amlogic iomap probe done [ 0.561939@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563854@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572856@3] audio_clocks: audio_clocks_probe done [ 0.581479@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581536@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586699@3] amlogic auge_snd_iomap probe done [ 0.857961@3] vgaarb: loaded [ 0.858365@3] SCSI subsystem initialized [ 0.859487@3] usbcore: registered new interface driver usbfs [ 0.864940@3] usbcore: registered new interface driver hub [ 0.870467@3] usbcore: registered new device driver usb [ 0.875755@3] Linux video capture interface: v2.00 [ 0.880493@3] pps_core: LinuxPPS API ver. 1 registered [ 0.885589@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894965@3] PTP clock support registered [ 0.899458@3] dmi: Firmware registration failed. [ 0.904093@3] secmon: reserve_mem_size:0x300000 [ 0.908309@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.915213@3] secmon: get page:ffffffbf00140000, 5000 [ 0.919954@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928348@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935074@3] fb: osd_init_module [ 0.939615@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.945136@3] Bluetooth: Core ver 2.22 [ 0.948261@3] NET: Registered protocol family 31 [ 0.952867@3] Bluetooth: HCI device and connection manager initialized [ 0.959419@3] Bluetooth: HCI socket layer initialized [ 0.964489@3] Bluetooth: L2CAP socket layer initialized [ 0.969777@3] Bluetooth: SCO socket layer initialized [ 0.978856@3] NetLabel: Initializing [ 0.978888@3] NetLabel: domain hash size = 128 [ 0.982957@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988171@3] NetLabel: unlabeled traffic allowed by default [ 0.995637@0] clocksource: Switched to clocksource arch_sys_counter [ 1.096216@0] VFS: Disk quotas dquot_6.6.0 [ 1.096313@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115066@0] NET: Registered protocol family 2 [ 1.115844@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121299@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.127962@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134548@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140513@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147154@0] NET: Registered protocol family 1 [ 1.152022@0] RPC: Registered named UNIX socket transport module. [ 1.157645@0] RPC: Registered udp transport module. [ 1.162526@0] RPC: Registered tcp transport module. [ 1.167424@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175453@0] Unpacking initramfs... [ 1.277060@0] Freeing initrd memory: 2308K [ 1.278483@0] hw perfevents: clusterb_enabled = 0 [ 1.280408@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.284770@0] hw perfevents: cluster A irq = 7 [ 1.289283@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298646@0] audit: initializing netlink subsys (disabled) [ 1.302814@0] audit: type=2000 audit(1.148:1): initialized [ 1.309442@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330399@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332396@0] NFS: Registering the id_resolver key type [ 1.336083@0] Key type id_resolver registered [ 1.340414@0] Key type id_legacy registered [ 1.344937@0] fuse init (API version 7.26) [ 1.353453@0] NET: Registered protocol family 38 [ 1.353497@0] Key type asymmetric registered [ 1.357671@0] Asymmetric key parser 'x509' registered [ 1.363016@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370355@0] io scheduler noop registered (default) [ 1.375326@0] io scheduler deadline registered [ 1.380102@0] io scheduler cfq registered [ 1.394746@3] random: fast init done [ 1.394810@3] random: crng init done [ 1.395292@0] Unable to detect cache hierarchy for CPU 0 [ 1.427566@0] loop: module loaded [ 1.432579@0] zram: Added device: zram0 [ 1.433035@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.438329@0] libphy: Fixed MDIO Bus: probed [ 1.442208@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.446984@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.454573@0] PPP generic driver version 2.4.2 [ 1.458121@0] PPP BSD Compression module registered [ 1.462734@0] PPP Deflate Compression module registered [ 1.467988@0] PPP MPPE Compression module registered [ 1.472953@0] NET: Registered protocol family 24 [ 1.477741@0] usbcore: registered new interface driver asix [ 1.483322@0] usbcore: registered new interface driver ax88179_178a [ 1.489586@0] usbcore: registered new interface driver cdc_ether [ 1.495609@0] usbcore: registered new interface driver net1080 [ 1.501463@0] usbcore: registered new interface driver cdc_subset [ 1.507611@0] usbcore: registered new interface driver zaurus [ 1.513391@0] usbcore: registered new interface driver cdc_ncm [ 1.519869@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.525903@0] ehci-pci: EHCI PCI platform driver [ 1.530653@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.536956@0] ohci-pci: OHCI PCI platform driver [ 1.542147@0] usbcore: registered new interface driver cdc_acm [ 1.547434@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.555770@0] usbcore: registered new interface driver usb-storage [ 1.562006@0] usbcore: registered new interface driver usbserial [ 1.568484@2] mousedev: PS/2 mouse device common for all mice [ 1.574177@2] usbcore: registered new interface driver xpad [ 1.579547@0] i2c /dev entries driver [ 1.583122@0] usbcore: registered new interface driver uvcvideo [ 1.588913@0] USB Video Class driver (1.1.1) [ 1.593179@0] md: linear personality registered for level -1 [ 1.599409@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.609035@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.614861@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.622584@1] usbcore: registered new interface driver usbhid [ 1.626552@1] usbhid: USB HID core driver [ 1.630791@3] ashmem: initialized [ 1.634249@1] logger: created 512K log 'log_main' [ 1.638783@3] logger: created 1K log 'log_events' [ 1.643522@1] logger: created 1K log 'log_radio' [ 1.648218@3] logger: created 16K log 'log_system' [ 1.652778@3] exFAT: Version 1.3.0 [ 1.657732@1] ff803000.serial: clock gate not found [ 1.661153@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.668316@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.683291@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.685898@1] console [ttyS0] enabled [ 1.685898@1] console [ttyS0] enabled [ 1.693122@1] bootconsole [aml_uart0] disabled [ 1.693122@1] bootconsole [aml_uart0] disabled [ 1.702582@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.709056@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.719328@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.729137@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.735678@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.748092@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.752136@2] irq = 20 [ 1.754456@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.763313@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.767715@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.772893@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.779414@2] meson-remote: Driver init [ 1.783358@2] meson-remote: remote_probe [ 1.786961@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.792016@2] meson-remote ff808040.rc: don't find the node [ 1.798591@2] meson-remote ff808040.rc: led_blink = 0 [ 1.803569@2] meson-remote ff808040.rc: don't find the node [ 1.810469@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.816116@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.821812@2] meson-remote ff808040.rc: custom_number = 3 [ 1.827129@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.832809@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.839969@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.846263@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.852411@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.858080@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.865238@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.871534@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.877679@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.883351@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.890509@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.896805@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.902934@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.909657@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.915435@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.921213@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.926906@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.932598@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.938549@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.944415@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.950021@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.955368@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.960715@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.966775@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.973712@0] meson-remote: IR XMP protocol handler initialized [ 1.979382@0] efusekeynum: 4 [ 1.981896@0] efusekeyname: mac offset: 0 size: 6 [ 1.988252@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.994623@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.001008@0] efusekeyname: usid offset: 18 size: 16 [ 2.007688@1] efuse efuse: probe OK! [ 2.013182@1] ge2d: ge2d_init_module [ 2.014951@1] [tsync_pcr_init]init success. [ 2.019529@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.026033@1] DI: di_module_init ok. [ 2.029117@1] dim:dim_module_init [ 2.032380@1] dim:dim_module_init finish [ 2.036049@1] dil:dil_init. [ 2.038984@1] dil:dil_init ok. [ 2.041847@1] vdin_drv_init: major 241 [ 2.045769@1] vdin_drv_init: vdin driver init done [ 2.050260@1] [viuin..]viuin_init_module viuin module init [ 2.056098@1] [viuin..]viuin_probe probe ok. [ 2.060185@1] amlvid:info: amlvideo_init called[ 2.064238@1] amlvid:info: amlvideo_create_instance called [ 2.069653@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.075164@1] amlvideo-000: V4L2 device registered as video10 [ 2.080453@1] amlvid:info: amlvideo_create_instance called [ 2.085871@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.091209@2] amlvideo-001: V4L2 device registered as video23 [ 2.096973@2] PPMGRDRV: warn: ppmgr module init func called [ 2.103159@2] videosync_create_instance dev_s ffffffc01c8da000,dev_s->dev ffffffc01db79100 [ 2.110396@2] videosync_create_instance reg videosync.0 [ 2.115822@2] aml_vecm_init:module init [ 2.115823@1] videosync_thread started [ 2.123386@2] amdolby_vision_init:module init [ 2.127670@2] prime_sl module init [ 2.131264@2] amlogic mtd driver init [ 2.134990@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.140210@2] bl mode descrete [ 2.143126@2] fip_copies 4 [ 2.145818@2] fip_size 0x200000 [ 2.148914@2] nand_clk_ctrl 0xffe07000 [ 2.152625@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.158252@2] nand_clk_ctrl 0xffe07000 [ 2.161954@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.170291@2] plat->aml_nand_device ffffff800a778cf8 [ 2.174819@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.180785@2] NAND device id: c2 dc 90 a2 57 3 [ 2.184977@2] NAND device: Manufacturer ID: [ 2.189022@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.195681@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.201180@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.206701@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.213011@2] mtd->oobavail: 0x10 [ 2.216685@0] aml_nand_init 2119: plat-name:bootloader [ 2.221386@0] Creating 1 MTD partitions on "bootloader": [ 2.226632@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.234485@3] bootloader initialized ok [ 2.235884@3] plat->aml_nand_device ffffff800a778cf8 [ 2.240775@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.246813@3] NAND device id: c2 dc 90 a2 57 3 [ 2.250953@3] NAND device: Manufacturer ID: [ 2.255014@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.261667@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.267161@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.272688@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.278986@3] mtd->oobavail: 0x10 [ 2.282470@3] aml_nand_init 2119: plat-name:nandnormal [ 2.287371@3] bbt_start=20 [ 2.290018@3] env_start=24 [ 2.292690@3] key_start=32 [ 2.295356@3] dtb_start=40 [ 2.298037@3] ddr_start=44 [ 2.300714@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.307195@3] get_free_node 43: bitmap=0 [ 2.310633@3] get_free_node 55: bitmap=1 [ 2.314716@3] get_free_node 43: bitmap=1 [ 2.318394@3] get_free_node 55: bitmap=3 [ 2.322478@3] get_free_node 43: bitmap=3 [ 2.326157@3] get_free_node 55: bitmap=7 [ 2.330038@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.336678@3] nbbt free list: [ 2.339603@3] blockN=21, ec=-1, dirty_flag=0 [ 2.343837@3] blockN=22, ec=-1, dirty_flag=0 [ 2.348063@3] blockN=23, ec=-1, dirty_flag=0 [ 2.352290@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.357697@3] nbbt valid addr: 500000 [ 2.360916@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.366522@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.372763@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.379174@3] get_free_node 43: bitmap=7 [ 2.382650@3] get_free_node 55: bitmap=f [ 2.386734@3] get_free_node 43: bitmap=f [ 2.390413@3] get_free_node 55: bitmap=1f [ 2.394583@3] get_free_node 43: bitmap=1f [ 2.398348@3] get_free_node 55: bitmap=3f [ 2.402518@3] get_free_node 43: bitmap=3f [ 2.406283@3] get_free_node 55: bitmap=7f [ 2.410453@3] get_free_node 43: bitmap=7f [ 2.414218@3] get_free_node 55: bitmap=ff [ 2.418388@3] get_free_node 43: bitmap=ff [ 2.422153@3] get_free_node 55: bitmap=1ff [ 2.426408@3] get_free_node 43: bitmap=1ff [ 2.430260@3] get_free_node 55: bitmap=3ff [ 2.434313@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.440954@3] nenv free list: [ 2.443887@3] blockN=25, ec=-1, dirty_flag=0 [ 2.448113@3] blockN=26, ec=-1, dirty_flag=0 [ 2.452339@3] blockN=27, ec=-1, dirty_flag=0 [ 2.456565@3] blockN=28, ec=-1, dirty_flag=0 [ 2.460791@3] blockN=29, ec=-1, dirty_flag=0 [ 2.465018@3] blockN=30, ec=-1, dirty_flag=0 [ 2.469245@3] blockN=31, ec=-1, dirty_flag=0 [ 2.473471@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.485216@3] nenv valid addr: 610000 [ 2.485235@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.489665@3] get_free_node 43: bitmap=3ff [ 2.493516@3] get_free_node 55: bitmap=7ff [ 2.497771@3] get_free_node 43: bitmap=7ff [ 2.501623@3] get_free_node 55: bitmap=fff [ 2.505880@3] get_free_node 43: bitmap=fff [ 2.509731@3] get_free_node 55: bitmap=1fff [ 2.514073@3] get_free_node 43: bitmap=1fff [ 2.518011@3] get_free_node 55: bitmap=3fff [ 2.522353@3] get_free_node 43: bitmap=3fff [ 2.526291@3] get_free_node 55: bitmap=7fff [ 2.530633@3] get_free_node 43: bitmap=7fff [ 2.534571@3] get_free_node 55: bitmap=ffff [ 2.538914@3] get_free_node 43: bitmap=ffff [ 2.542851@3] get_free_node 55: bitmap=1ffff [ 2.547280@3] get_free_node 43: bitmap=1ffff [ 2.551303@3] get_free_node 55: bitmap=3ffff [ 2.555529@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.562173@3] nkey free list: [ 2.565103@3] blockN=32, ec=-1, dirty_flag=0 [ 2.569329@3] blockN=33, ec=-1, dirty_flag=0 [ 2.573555@3] blockN=34, ec=-1, dirty_flag=0 [ 2.577781@3] blockN=35, ec=-1, dirty_flag=0 [ 2.582049@3] blockN=36, ec=-1, dirty_flag=0 [ 2.586235@3] blockN=37, ec=-1, dirty_flag=0 [ 2.590460@3] blockN=38, ec=-1, dirty_flag=0 [ 2.594686@3] blockN=39, ec=-1, dirty_flag=0 [ 2.598913@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.604001@3] nkey valid addr: fffffffffffc0000 [ 2.608492@3] aml_nand_key_check 1251 NO key exist [ 2.613231@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.619856@3] get_free_node 43: bitmap=3ffff [ 2.623667@3] get_free_node 55: bitmap=7ffff [ 2.628096@3] get_free_node 43: bitmap=7ffff [ 2.632120@3] get_free_node 55: bitmap=fffff [ 2.636548@3] get_free_node 43: bitmap=fffff [ 2.640572@3] get_free_node 55: bitmap=1fffff [ 2.644884@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.651525@3] ndtb free list: [ 2.654457@3] blockN=41, ec=-1, dirty_flag=0 [ 2.658684@3] blockN=42, ec=-1, dirty_flag=0 [ 2.662910@3] blockN=43, ec=-1, dirty_flag=0 [ 2.667136@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.685125@3] ndtb valid addr: a00000 [ 2.685145@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.689575@3] get_free_node 43: bitmap=1fffff [ 2.693685@3] get_free_node 55: bitmap=3fffff [ 2.698201@3] get_free_node 43: bitmap=3fffff [ 2.702310@3] get_free_node 55: bitmap=7fffff [ 2.706622@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.713262@3] nddr free list: [ 2.716195@3] blockN=44, ec=-1, dirty_flag=0 [ 2.720421@3] blockN=45, ec=-1, dirty_flag=0 [ 2.724648@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.729736@3] nddr valid addr: fffffffffffc0000 [ 2.734221@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.738968@3] tpl: off 16777216, size 8388608 [ 2.805233@3] Creating 7 MTD partitions on "nandnormal": [ 2.805263@3] 0x000001000000-0x000001800000 : "tpl" [ 2.812700@2] 0x000001800000-0x000001a00000 : "misc" [ 2.816160@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.821247@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.828133@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.832804@2] 0x000003b00000-0x000015300000 : "system" [ 2.871834@2] 0x000015300000-0x000020000000 : "data" [ 2.895063@2] nandnormal initialized ok [ 2.895143@2] aml_ubootenv_init: register env chardev [ 2.898525@2] aml_ubootenv_init: register env chardev OK [ 2.903752@2] amlnf_dtb_init: register dtb cdev [ 2.908258@2] amlnf_dtb_init: register dtd cdev OK [ 2.912809@2] mtd_nand_probe 267 , err = 0 [ 2.917516@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.923128@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.929946@2] unifykey: storage in base: 0xffffffc005000000 [ 2.934890@2] unifykey: storage out base: 0xffffffc005040000 [ 2.940464@2] unifykey: storage block base: 0xffffffc005080000 [ 2.946245@2] unifykey: probe done! [ 2.950128@2] unifykey: no efuse-version set, use default value: -1 [ 2.955920@2] unifykey: key unify config unifykey-num is 6 [ 2.961376@2] unifykey: key unify fact unifykey-num is 6 [ 2.966603@2] unifykey: unifykey_devno: ee00000 [ 2.971360@2] unifykey: device unifykeys created ok [ 2.976003@2] unifykey: aml_unifykeys_init done! [ 2.980776@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.987207@2] amlkaraoke init success! [ 2.990273@2] sysled: module init [ 2.993658@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.998640@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.005744@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.012278@3] amlogic rfkill init [ 3.016941@1] dmc_monitor_probe [ 3.018659@1] page_trace_module_init, create sysfs failed [ 3.024345@1] defendkey defendkey: Reserved memory is not enough! [ 3.029863@1] defendkey: probe of defendkey failed with error -22 [ 3.036823@1] usbcore: registered new interface driver snd-usb-audio [ 3.046224@1] asoc debug: aml_audio_controller_probe-130 [ 3.047993@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.053254@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.061040@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.068218@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.074590@1] aml_tdm_platform_probe(), share en = 1[ 3.079328@1] No channel mask node Channel_Mask [ 3.084106@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.089646@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.097598@1] aml_tdm_platform_probe(), share en = 1[ 3.102110@1] No channel mask node Channel_Mask [ 3.106850@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.112414@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.120352@1] aml_tdm_platform_probe(), share en = 1[ 3.124876@1] No channel mask node Channel_Mask [ 3.130474@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.137522@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.145607@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.155547@1] Register vad [ 3.156708@1] check whether to update sound card init data [ 3.162487@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.169500@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.176793@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.182408@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.190075@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.197407@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.203275@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.209762@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.216848@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.222828@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.229716@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.235524@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.242262@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.249944@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.257059@3] snd_card_add_kcontrols card:ffffffc01d802018 [ 3.262132@3] effect_v2 is not init [ 3.265575@3] Failed to add VAD controls [ 3.269777@3] GACT probability NOT on [ 3.273082@3] Mirror/redirect action on [ 3.276847@3] u32 classifier [ 3.279689@3] Actions configured [ 3.283217@3] Netfilter messages via NETLINK v0.30. [ 3.288315@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.294529@3] ctnetlink v0.93: registering with nfnetlink. [ 3.300238@2] xt_time: kernel timezone is -0000 [ 3.304212@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.310392@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.315423@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.320983@2] Initializing XFRM netlink socket [ 3.325964@2] NET: Registered protocol family 10 [ 3.331128@2] mip6: Mobile IPv6 [ 3.333036@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.338852@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.345838@2] NET: Registered protocol family 17 [ 3.349171@2] NET: Registered protocol family 15 [ 3.353741@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.366842@2] Bluetooth: RFCOMM TTY layer initialized [ 3.371731@2] Bluetooth: RFCOMM socket layer initialized [ 3.377007@2] Bluetooth: RFCOMM ver 1.11 [ 3.380868@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.386289@2] Bluetooth: BNEP filters: protocol multicast [ 3.391643@2] Bluetooth: BNEP socket layer initialized [ 3.396731@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.402771@2] Bluetooth: HIDP socket layer initialized [ 3.407956@2] l2tp_core: L2TP core driver, V2.0 [ 3.412356@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.417255@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.422981@2] l2tp_netlink: L2TP netlink interface [ 3.427738@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.433765@2] l2tp_debugfs: L2TP debugfs support [ 3.438299@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.444904@2] NET: Registered protocol family 35 [ 3.449670@2] Key type dns_resolver registered [ 3.454834@2] Registered swp emulation handler [ 3.458318@2] Registered cp15_barrier emulation handler [ 3.463467@2] Registered setend emulation handler [ 3.468128@2] disable EAS feature [ 3.472653@1] registered taskstats version 1 [ 3.485013@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.991237@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.991296@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.999429@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.007902@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.014819@3] hub 1-0:1.0: USB hub found [ 4.017855@3] hub 1-0:1.0: 1 port detected [ 4.022162@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.027421@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.035235@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.044184@2] hub 2-0:1.0: USB hub found [ 4.047275@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.054614@2] usb usb2: Unsupported the hub [ 4.059142@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.067136@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.175720@2] dwc_otg: Core Release: 3.10a [ 4.175755@2] dwc_otg: Setting default values for core params [ 4.179916@2] dwc_otg: curmode: 0, host_only: 0 [ 4.196718@2] dwc_otg: Using Buffer DMA mode [ 4.196741@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.200619@2] dwc_otg: Working on port type = SLAVE [ 4.205451@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.212589@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.221662@0] gxbb_pm: enter meson_pm_probe! [ 4.221700@0] no vddio3v3_en pin[ 4.223338@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.228431@0] gxbb_pm: meson_pm_probe done [ 4.232759[ 4.239086@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.244539@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.453122@1] ubi0: attaching mtd6 [ 4.981312@1] ubi0: scanning is finished [ 4.985546@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.985837@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.992847@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.999732@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.006799@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.013012@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.020340@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.029572@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.038980@2] ubi0: background thread "ubi_bgt0d" started, PID 2004 [ 5.044575@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2007 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.089254@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.091183@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.101216@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.111985@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.117927@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.308927@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.369963@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.454258@3] ubi1: attaching mtd7 [ 5.780633@3] ubi1: scanning is finished [ 5.784560@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.784676@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.791686@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.798571@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.805638@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.811764@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.819093@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.828325@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.837647@2] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.846952@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.870523@1] UBIFS (ubi1:0): recovery needed [ 5.922997@1] UBIFS (ubi1:0): recovery completed [ 5.923151@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.929336@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.939328@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.950020@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.956750@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f2cc8450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.983836@1] aml_tdm_open [ 6.994581@1] asoc-aml-card auge_sound: tdm prepare capture [ 6.994618@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.001458@1] aml_tdm_open [ 7.002806@1] Not init audio effects Opened TCP tuning i[ 7.009794@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.015781@2] cpufreq_interactive: no need to active hmp boost! nterface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.104833@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.108498@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.114430@0] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.163544@0] asoc-aml-card auge_sound: tdm playback enable [ 7.251921@3] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894072 [ 7.252322@3] asoc-aml-card auge_sound: tdm capture stop [ 7.257709@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.263143@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.269152@0] asoc-aml-card auge_sound: tdm capture enable [ 7.281131@3] asoc-aml-card auge_sound: tdm playback stop [ 7.327614@0] asoc-aml-card auge_sound: tdm playback enable [ 8.608606@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.331818@1] asoc-aml-card auge_sound: tdm playback stop [ 14.332124@3] asoc-aml-card auge_sound: tdm capture stop [ 14.336930@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.324809@1] mtd_nand_reboot_notifier 35 [ 16.325069@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.333200@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.336742@1] usb usb2: USB disconnect, device number 1 [ 16.346053@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.347268@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.352557@3] usb usb1: USB disconnect, device number 1 [ 16.358425@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.379643@0] reboot: Restarting system [ 16.379756@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21797 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 35 25 0b 3f 19 01 31 27 0e 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975816 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021109@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129132@0] ftrace: allocating 43519 entries in 170 pages [ 0.209556@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210369@0] CPU0: update cpu_capacity 1024 [ 0.214694@0] ASID allocator initialised with 32768 entries [ 0.252676@0] secmon: can't fine clear_range [ 0.253264@0] EFI services will not be available. [ 0.256101@0] Meson chip version = RevC (25:C - 43:0) [ 0.290036@1] Detected VIPT I-cache on CPU1 [ 0.290098@1] CPU1: update cpu_capacity 1024 [ 0.290100@1] CPU1: Booted secondary processor [410fd034] [ 0.318086@2] Detected VIPT I-cache on CPU2 [ 0.318140@2] CPU2: update cpu_capacity 1024 [ 0.318142@2] CPU2: Booted secondary processor [410fd034] [ 0.346150@3] Detected VIPT I-cache on CPU3 [ 0.346198@3] CPU3: update cpu_capacity 1024 [ 0.346200@3] CPU3: Booted secondary processor [410fd034] [ 0.346291@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390417@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407419@0] CPU: All CPU(s) started at EL2 [ 0.408192@0] alternatives: patching kernel code [ 0.413597@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420731@0] devtmpfs: initialized [ 0.436186@0] DMI not present or invalid. [ 0.436589@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444570@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451134@0] pinctrl core: initialized pinctrl subsystem [ 0.457714@0] NET: Registered protocol family 16 [ 0.481070@0] cpuidle: using governor menu [ 0.481218@0] register canvas platform driver [ 0.483936@0] register rdma platform driver [ 0.489384@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495758@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503228@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509375@0] clkmsr: clkmsr: driver init [ 0.513063@0] codec_mm_module_init [ 0.516502@0] media_configs_system_init [ 0.520644@0] aml_watch_point_probe, in, wp:2 [ 0.526153@0] pstore: using zlib compression [ 0.529567@0] console [pstore-1] enabled [ 0.532894@0] pstore: Registered ramoops as persistent store backend [ 0.539308@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553346@0] aml_iomap: amlogic iomap probe done [ 0.558065@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559944@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568921@0] audio_clocks: audio_clocks_probe done [ 0.577493@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577547@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582728@0] amlogic auge_snd_iomap probe done [ 0.858477@0] vgaarb: loaded [ 0.858872@0] SCSI subsystem initialized [ 0.859984@0] usbcore: registered new interface driver usbfs [ 0.865464@0] usbcore: registered new interface driver hub [ 0.870992@0] usbcore: registered new device driver usb [ 0.876275@0] Linux video capture interface: v2.00 [ 0.881023@0] pps_core: LinuxPPS API ver. 1 registered [ 0.886115@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.895481@0] PTP clock support registered [ 0.903812@0] dmi: Firmware registration failed. [ 0.907892@0] secmon: reserve_mem_size:0x300000 [ 0.908792@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915790@0] secmon: get page:ffffffbf00140000, 5000 [ 0.920476@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928859@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935595@0] fb: osd_init_module [ 0.940107@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.945667@0] Bluetooth: Core ver 2.22 [ 0.948783@0] NET: Registered protocol family 31 [ 0.953383@0] Bluetooth: HCI device and connection manager initialized [ 0.959937@0] Bluetooth: HCI socket layer initialized [ 0.965002@0] Bluetooth: L2CAP socket layer initialized [ 0.970325@0] Bluetooth: SCO socket layer initialized [ 0.975863@0] NetLabel: Initializing [ 0.978903@0] NetLabel: domain hash size = 128 [ 0.983550@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988714@0] NetLabel: unlabeled traffic allowed by default [ 0.996106@3] clocksource: Switched to clocksource arch_sys_counter [ 1.096741@3] VFS: Disk quotas dquot_6.6.0 [ 1.096847@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115649@3] NET: Registered protocol family 2 [ 1.116454@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121862@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.128548@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.135098@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.141071@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147732@3] NET: Registered protocol family 1 [ 1.152571@3] RPC: Registered named UNIX socket transport module. [ 1.158218@3] RPC: Registered udp transport module. [ 1.163102@3] RPC: Registered tcp transport module. [ 1.168002@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.176070@3] Unpacking initramfs... [ 1.277549@3] Freeing initrd memory: 2308K [ 1.278942@3] hw perfevents: clusterb_enabled = 0 [ 1.280896@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.285262@3] hw perfevents: cluster A irq = 7 [ 1.289769@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.299156@3] audit: initializing netlink subsys (disabled) [ 1.303306@3] audit: type=2000 audit(1.068:1): initialized [ 1.309949@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326876@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328859@3] NFS: Registering the id_resolver key type [ 1.332571@3] Key type id_resolver registered [ 1.336901@3] Key type id_legacy registered [ 1.341421@3] fuse init (API version 7.26) [ 1.349902@3] NET: Registered protocol family 38 [ 1.349948@3] Key type asymmetric registered [ 1.354143@3] Asymmetric key parser 'x509' registered [ 1.359483@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366892@3] io scheduler noop registered (default) [ 1.371804@3] io scheduler deadline registered [ 1.376516@3] io scheduler cfq registered [ 1.391309@3] Unable to detect cache hierarchy for CPU 0 [ 1.391476@3] random: fast init done [ 1.394753@3] random: crng init done [ 1.425228@0] loop: module loaded [ 1.430202@0] zram: Added device: zram0 [ 1.430668@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.435941@0] libphy: Fixed MDIO Bus: probed [ 1.439858@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.444611@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.452234@0] PPP generic driver version 2.4.2 [ 1.455717@0] PPP BSD Compression module registered [ 1.460356@0] PPP Deflate Compression module registered [ 1.465608@0] PPP MPPE Compression module registered [ 1.470572@0] NET: Registered protocol family 24 [ 1.475366@0] usbcore: registered new interface driver asix [ 1.480940@0] usbcore: registered new interface driver ax88179_178a [ 1.487196@0] usbcore: registered new interface driver cdc_ether [ 1.493225@0] usbcore: registered new interface driver net1080 [ 1.499094@0] usbcore: registered new interface driver cdc_subset [ 1.505227@0] usbcore: registered new interface driver zaurus [ 1.511003@0] usbcore: registered new interface driver cdc_ncm [ 1.517434@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.523535@0] ehci-pci: EHCI PCI platform driver [ 1.528274@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.534578@0] ohci-pci: OHCI PCI platform driver [ 1.539745@0] usbcore: registered new interface driver cdc_acm [ 1.545060@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.553372@0] usbcore: registered new interface driver usb-storage [ 1.559638@0] usbcore: registered new interface driver usbserial [ 1.566099@0] mousedev: PS/2 mouse device common for all mice [ 1.571668@0] usbcore: registered new interface driver xpad [ 1.577138@0] i2c /dev entries driver [ 1.580742@0] usbcore: registered new interface driver uvcvideo [ 1.586521@0] USB Video Class driver (1.1.1) [ 1.590804@0] md: linear personality registered for level -1 [ 1.596997@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.606610@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.612454@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.620246@1] usbcore: registered new interface driver usbhid [ 1.624158@1] usbhid: USB HID core driver [ 1.628417@2] ashmem: initialized [ 1.631840@2] logger: created 512K log 'log_main' [ 1.636447@3] logger: created 1K log 'log_events' [ 1.641139@2] logger: created 1K log 'log_radio' [ 1.645839@3] logger: created 16K log 'log_system' [ 1.650412@3] exFAT: Version 1.3.0 [ 1.655073@1] ff803000.serial: clock gate not found [ 1.658783@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.665943@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.680911@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.683506@1] console [ttyS0] enabled [ 1.683506@1] console [ttyS0] enabled [ 1.690753@1] bootconsole [aml_uart0] disabled [ 1.690753@1] bootconsole [aml_uart0] disabled [ 1.700240@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.706647@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.717040@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.726780@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.733266@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.745733@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.749769@3] irq = 20 [ 1.752076@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.761022@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.765336@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.770548@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.777026@3] meson-remote: Driver init [ 1.780974@3] meson-remote: remote_probe [ 1.784584@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.789635@3] meson-remote ff808040.rc: don't find the node [ 1.796190@3] meson-remote ff808040.rc: led_blink = 0 [ 1.801189@3] meson-remote ff808040.rc: don't find the node [ 1.808092@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.813739@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.819438@3] meson-remote ff808040.rc: custom_number = 3 [ 1.824747@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.830434@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.837587@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.843889@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.850034@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.855701@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.862858@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.869154@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.875299@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.880971@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.888129@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.894425@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.900555@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.907276@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.913055@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.918833@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.924526@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.930218@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.936170@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.942035@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.947641@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.952989@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.958336@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.964464@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.971290@2] meson-remote: IR XMP protocol handler initialized [ 1.977002@2] efusekeynum: 4 [ 1.979477@2] efusekeyname: mac offset: 0 size: 6 [ 1.985900@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.992256@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.998627@2] efusekeyname: usid offset: 18 size: 16 [ 2.005263@0] efuse efuse: probe OK! [ 2.010825@0] ge2d: ge2d_init_module [ 2.012666@0] [tsync_pcr_init]init success. [ 2.017138@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.023626@0] DI: di_module_init ok. [ 2.026726@0] dim:dim_module_init [ 2.029984@0] dim:dim_module_init finish [ 2.033670@0] dil:dil_init. [ 2.036630@0] dil:dil_init ok. [ 2.039447@0] vdin_drv_init: major 241 [ 2.043391@0] vdin_drv_init: vdin driver init done [ 2.047882@0] [viuin..]viuin_init_module viuin module init [ 2.053711@0] [viuin..]viuin_probe probe ok. [ 2.057795@0] amlvid:info: amlvideo_init called[ 2.061854@0] amlvid:info: amlvideo_create_instance called [ 2.067272@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.072622@1] amlvideo-000: V4L2 device registered as video10 [ 2.078071@1] amlvid:info: amlvideo_create_instance called [ 2.083495@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.088797@1] amlvideo-001: V4L2 device registered as video23 [ 2.094565@1] PPMGRDRV: warn: ppmgr module init func called [ 2.101013@1] videosync_create_instance dev_s ffffffc01da9dc00,dev_s->dev ffffffc01d456600 [ 2.108006@1] videosync_create_instance reg videosync.0 [ 2.113251@1] aml_vecm_init:module init [ 2.113253@3] videosync_thread started [ 2.121004@1] amdolby_vision_init:module init [ 2.125271@1] prime_sl module init [ 2.128916@1] amlogic mtd driver init [ 2.132593@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.137832@1] bl mode descrete [ 2.140773@1] fip_copies 4 [ 2.143420@1] fip_size 0x200000 [ 2.146535@1] nand_clk_ctrl 0xffe07000 [ 2.150248@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.155873@1] nand_clk_ctrl 0xffe07000 [ 2.159578@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.167891@1] plat->aml_nand_device ffffff800a778cf8 [ 2.172419@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.178396@1] NAND device id: c2 dc 90 a2 57 3 [ 2.182595@1] NAND device: Manufacturer ID: [ 2.186642@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.193301@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.198800@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.204321@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.210623@1] mtd->oobavail: 0x10 [ 2.214250@3] aml_nand_init 2119: plat-name:bootloader [ 2.219014@3] Creating 1 MTD partitions on "bootloader": [ 2.224251@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.232262@3] bootloader initialized ok [ 2.233474@3] plat->aml_nand_device ffffff800a778cf8 [ 2.238409@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.244435@3] NAND device id: c2 dc 90 a2 57 3 [ 2.248577@3] NAND device: Manufacturer ID: [ 2.252622@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.259282@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.264782@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.270303@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.276606@3] mtd->oobavail: 0x10 [ 2.280023@3] aml_nand_init 2119: plat-name:nandnormal [ 2.284987@3] bbt_start=20 [ 2.287629@3] env_start=24 [ 2.290318@3] key_start=32 [ 2.292986@3] dtb_start=40 [ 2.295650@3] ddr_start=44 [ 2.298334@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.304807@3] get_free_node 43: bitmap=0 [ 2.308252@3] get_free_node 55: bitmap=1 [ 2.312337@3] get_free_node 43: bitmap=1 [ 2.316005@3] get_free_node 55: bitmap=3 [ 2.320108@3] get_free_node 43: bitmap=3 [ 2.323768@3] get_free_node 55: bitmap=7 [ 2.327658@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.334298@3] nbbt free list: [ 2.337231@3] blockN=21, ec=-1, dirty_flag=0 [ 2.341457@3] blockN=22, ec=-1, dirty_flag=0 [ 2.345683@3] blockN=23, ec=-1, dirty_flag=0 [ 2.349910@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.355318@3] nbbt valid addr: 500000 [ 2.358536@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.364142@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.370383@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.376794@3] get_free_node 43: bitmap=7 [ 2.380270@3] get_free_node 55: bitmap=f [ 2.384355@3] get_free_node 43: bitmap=f [ 2.388024@3] get_free_node 55: bitmap=1f [ 2.392203@3] get_free_node 43: bitmap=1f [ 2.395959@3] get_free_node 55: bitmap=3f [ 2.400138@3] get_free_node 43: bitmap=3f [ 2.403894@3] get_free_node 55: bitmap=7f [ 2.408073@3] get_free_node 43: bitmap=7f [ 2.411838@3] get_free_node 55: bitmap=ff [ 2.416014@3] get_free_node 43: bitmap=ff [ 2.419773@3] get_free_node 55: bitmap=1ff [ 2.424029@3] get_free_node 43: bitmap=1ff [ 2.427879@3] get_free_node 55: bitmap=3ff [ 2.431933@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.438574@3] nenv free list: [ 2.441507@3] blockN=25, ec=-1, dirty_flag=0 [ 2.445733@3] blockN=26, ec=-1, dirty_flag=0 [ 2.449959@3] blockN=27, ec=-1, dirty_flag=0 [ 2.454185@3] blockN=28, ec=-1, dirty_flag=0 [ 2.458411@3] blockN=29, ec=-1, dirty_flag=0 [ 2.462638@3] blockN=30, ec=-1, dirty_flag=0 [ 2.466864@3] blockN=31, ec=-1, dirty_flag=0 [ 2.471091@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.482828@3] nenv valid addr: 610000 [ 2.482847@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.487277@3] get_free_node 43: bitmap=3ff [ 2.491127@3] get_free_node 55: bitmap=7ff [ 2.495383@3] get_free_node 43: bitmap=7ff [ 2.499235@3] get_free_node 55: bitmap=fff [ 2.503491@3] get_free_node 43: bitmap=fff [ 2.507342@3] get_free_node 55: bitmap=1fff [ 2.511685@3] get_free_node 43: bitmap=1fff [ 2.515622@3] get_free_node 55: bitmap=3fff [ 2.519965@3] get_free_node 43: bitmap=3fff [ 2.523902@3] get_free_node 55: bitmap=7fff [ 2.528246@3] get_free_node 43: bitmap=7fff [ 2.532182@3] get_free_node 55: bitmap=ffff [ 2.536525@3] get_free_node 43: bitmap=ffff [ 2.540462@3] get_free_node 55: bitmap=1ffff [ 2.544891@3] get_free_node 43: bitmap=1ffff [ 2.548915@3] get_free_node 55: bitmap=3ffff [ 2.553141@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.559780@3] nkey free list: [ 2.562714@3] blockN=32, ec=-1, dirty_flag=0 [ 2.566940@3] blockN=33, ec=-1, dirty_flag=0 [ 2.571166@3] blockN=34, ec=-1, dirty_flag=0 [ 2.575393@3] blockN=35, ec=-1, dirty_flag=0 [ 2.579619@3] blockN=36, ec=-1, dirty_flag=0 [ 2.583845@3] blockN=37, ec=-1, dirty_flag=0 [ 2.588071@3] blockN=38, ec=-1, dirty_flag=0 [ 2.592298@3] blockN=39, ec=-1, dirty_flag=0 [ 2.596524@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.601613@3] nkey valid addr: fffffffffffc0000 [ 2.606103@3] aml_nand_key_check 1251 NO key exist [ 2.610842@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.617458@3] get_free_node 43: bitmap=3ffff [ 2.621279@3] get_free_node 55: bitmap=7ffff [ 2.625708@3] get_free_node 43: bitmap=7ffff [ 2.629731@3] get_free_node 55: bitmap=fffff [ 2.634181@3] get_free_node 43: bitmap=fffff [ 2.638185@3] get_free_node 55: bitmap=1fffff [ 2.642496@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.649136@3] ndtb free list: [ 2.652061@3] blockN=41, ec=-1, dirty_flag=0 [ 2.656295@3] blockN=42, ec=-1, dirty_flag=0 [ 2.660521@3] blockN=43, ec=-1, dirty_flag=0 [ 2.664748@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.682751@3] ndtb valid addr: a00000 [ 2.682771@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.687204@3] get_free_node 43: bitmap=1fffff [ 2.691314@3] get_free_node 55: bitmap=3fffff [ 2.695829@3] get_free_node 43: bitmap=3fffff [ 2.699937@3] get_free_node 55: bitmap=7fffff [ 2.704251@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.710891@3] nddr free list: [ 2.713824@3] blockN=44, ec=-1, dirty_flag=0 [ 2.718050@3] blockN=45, ec=-1, dirty_flag=0 [ 2.722277@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.727365@3] nddr valid addr: fffffffffffc0000 [ 2.731850@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.736597@3] tpl: off 16777216, size 8388608 [ 2.802899@3] Creating 7 MTD partitions on "nandnormal": [ 2.802930@3] 0x000001000000-0x000001800000 : "tpl" [ 2.810474@0] 0x000001800000-0x000001a00000 : "misc" [ 2.814122@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.818659@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.825759@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.830465@2] 0x000003b00000-0x000015300000 : "system" [ 2.869438@2] 0x000015300000-0x000020000000 : "data" [ 2.892759@2] nandnormal initialized ok [ 2.892840@2] aml_ubootenv_init: register env chardev [ 2.896193@2] aml_ubootenv_init: register env chardev OK [ 2.901426@2] amlnf_dtb_init: register dtb cdev [ 2.905934@2] amlnf_dtb_init: register dtd cdev OK [ 2.910489@2] mtd_nand_probe 267 , err = 0 [ 2.915229@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.920824@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.927616@2] unifykey: storage in base: 0xffffffc005000000 [ 2.932567@2] unifykey: storage out base: 0xffffffc005040000 [ 2.938158@2] unifykey: storage block base: 0xffffffc005080000 [ 2.943930@2] unifykey: probe done! [ 2.947826@2] unifykey: no efuse-version set, use default value: -1 [ 2.953609@2] unifykey: key unify config unifykey-num is 6 [ 2.959071@2] unifykey: key unify fact unifykey-num is 6 [ 2.964290@2] unifykey: unifykey_devno: ee00000 [ 2.969075@2] unifykey: device unifykeys created ok [ 2.973687@2] unifykey: aml_unifykeys_init done! [ 2.978459@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.984946@2] amlkaraoke init success! [ 2.987912@2] sysled: module init [ 2.991363@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.996314@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.003653@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.009969@2] amlogic rfkill init [ 3.014598@2] dmc_monitor_probe [ 3.016386@2] page_trace_module_init, create sysfs failed [ 3.022081@2] defendkey defendkey: Reserved memory is not enough! [ 3.027540@2] defendkey: probe of defendkey failed with error -22 [ 3.034527@2] usbcore: registered new interface driver snd-usb-audio [ 3.043703@2] asoc debug: aml_audio_controller_probe-130 [ 3.045664@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.050941@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.058728@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.065903@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.072274@2] aml_tdm_platform_probe(), share en = 1[ 3.077015@2] No channel mask node Channel_Mask [ 3.081800@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.087324@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.095282@2] aml_tdm_platform_probe(), share en = 1[ 3.099796@2] No channel mask node Channel_Mask [ 3.104513@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.110102@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.118029@2] aml_tdm_platform_probe(), share en = 1[ 3.122558@2] No channel mask node Channel_Mask [ 3.128187@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.135190@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.143287@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.153268@2] Register vad [ 3.154351@2] check whether to update sound card init data [ 3.160222@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.167156@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.174486@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.180120@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.187763@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.195095@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.200974@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.207455@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.214587@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.220501@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.227445@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.233218@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.239936@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.247758@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.254747@0] snd_card_add_kcontrols card:ffffffc01c9c7018 [ 3.259854@0] effect_v2 is not init [ 3.263237@0] Failed to add VAD controls [ 3.267461@0] GACT probability NOT on [ 3.270767@0] Mirror/redirect action on [ 3.274536@0] u32 classifier [ 3.277373@0] Actions configured [ 3.280921@0] Netfilter messages via NETLINK v0.30. [ 3.285993@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.292215@0] ctnetlink v0.93: registering with nfnetlink. [ 3.297890@0] xt_time: kernel timezone is -0000 [ 3.301895@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.308075@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.313118@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.318665@0] Initializing XFRM netlink socket [ 3.323644@0] NET: Registered protocol family 10 [ 3.329095@0] mip6: Mobile IPv6 [ 3.330700@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.336547@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.343544@0] NET: Registered protocol family 17 [ 3.346862@0] NET: Registered protocol family 15 [ 3.351424@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.364528@0] Bluetooth: RFCOMM TTY layer initialized [ 3.369422@0] Bluetooth: RFCOMM socket layer initialized [ 3.374696@0] Bluetooth: RFCOMM ver 1.11 [ 3.378555@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.383978@0] Bluetooth: BNEP filters: protocol multicast [ 3.389337@0] Bluetooth: BNEP socket layer initialized [ 3.394428@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.400461@0] Bluetooth: HIDP socket layer initialized [ 3.405639@0] l2tp_core: L2TP core driver, V2.0 [ 3.410048@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.414944@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.420670@0] l2tp_netlink: L2TP netlink interface [ 3.425432@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.431454@0] l2tp_debugfs: L2TP debugfs support [ 3.435989@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.442593@0] NET: Registered protocol family 35 [ 3.447351@0] Key type dns_resolver registered [ 3.452548@0] Registered swp emulation handler [ 3.455986@0] Registered cp15_barrier emulation handler [ 3.461101@0] Registered setend emulation handler [ 3.465838@0] disable EAS feature [ 3.470365@1] registered taskstats version 1 [ 3.482720@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.988956@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.989014@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.997133@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.005630@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.012623@2] hub 1-0:1.0: USB hub found [ 4.015510@2] hub 1-0:1.0: 1 port detected [ 4.019904@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.025148@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.032963@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.042028@0] hub 2-0:1.0: USB hub found [ 4.045050@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.052312@0] usb usb2: Unsupported the hub [ 4.056779@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.064873@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.173477@3] dwc_otg: Core Release: 3.10a [ 4.173514@3] dwc_otg: Setting default values for core params [ 4.177679@3] dwc_otg: curmode: 0, host_only: 0 [ 4.194471@3] dwc_otg: Using Buffer DMA mode [ 4.194494@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.198377@3] dwc_otg: Working on port type = SLAVE [ 4.203210@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.210311@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.219813@3] gxbb_pm: enter meson_pm_probe! [ 4.219853@3] no vddio3v3_en pin[ 4.221523@3] pm-meson aml_pm: Can't get switch_clk81 [ 4.226528@3] gxbb_pm: meson_pm_probe done [ 4.23090W 4.237191@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.242592@3] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.450899@0] ubi0: attaching mtd6 [ 4.979548@0] ubi0: scanning is finished [ 4.983669@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.983957@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.990970@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.997854@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.004950@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.011134@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.018460@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.027693@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.037125@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.042801@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.087540@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.089544@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.099485@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.110257@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.116210@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.293548@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.354452@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.438344@3] ubi1: attaching mtd7 [ 5.764599@3] ubi1: scanning is finished [ 5.768399@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.768599@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.775619@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.782499@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.789561@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.795688@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.803016@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.812249@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.821569@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.830775@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.854466@0] UBIFS (ubi1:0): recovery needed [ 5.908502@0] UBIFS (ubi1:0): recovery completed [ 5.908662@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.914839@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.924838@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.935531@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.942260@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2c98450 --- 0 [ 6.971398@0] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 6.981250@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.984197@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.990736@0] aml_tdm_open [ 6.992441@0] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from[ 7.005440@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.008575@2] cpufreq_interactive: no need to active hmp boost! PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.089697@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.093365@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.099857@0] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.148703@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.692262@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22022 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 31 27 0e 40 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015888 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1977907 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016833@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114511@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209504@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210317@0] CPU0: update cpu_capacity 1024 [ 0.214644@0] ASID allocator initialised with 32768 entries [ 0.252626@0] secmon: can't fine clear_range [ 0.253205@0] EFI services will not be available. [ 0.256061@0] Meson chip version = RevC (25:C - 43:0) [ 0.289993@1] Detected VIPT I-cache on CPU1 [ 0.290054@1] CPU1: update cpu_capacity 1024 [ 0.290056@1] CPU1: Booted secondary processor [410fd034] [ 0.318038@2] Detected VIPT I-cache on CPU2 [ 0.318090@2] CPU2: update cpu_capacity 1024 [ 0.318092@2] CPU2: Booted secondary processor [410fd034] [ 0.346105@3] Detected VIPT I-cache on CPU3 [ 0.346153@3] CPU3: update cpu_capacity 1024 [ 0.346156@3] CPU3: Booted secondary processor [410fd034] [ 0.346247@0] Brought up 4 CPUs [ 0.385464@0] SMP: Total of 4 processors activated. [ 0.390373@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396409@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407368@0] CPU: All CPU(s) started at EL2 [ 0.408148@0] alternatives: patching kernel code [ 0.413553@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420687@0] devtmpfs: initialized [ 0.436124@0] DMI not present or invalid. [ 0.436514@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444507@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451068@0] pinctrl core: initialized pinctrl subsystem [ 0.457667@0] NET: Registered protocol family 16 [ 0.484996@2] cpuidle: using governor menu [ 0.485145@2] register canvas platform driver [ 0.487866@2] register rdma platform driver [ 0.493326@2] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499686@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507152@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513283@2] clkmsr: clkmsr: driver init [ 0.516991@2] codec_mm_module_init [ 0.520433@2] media_configs_system_init [ 0.524570@2] aml_watch_point_probe, in, wp:2 [ 0.529225@2] pstore: using zlib compression [ 0.533482@2] console [pstore-1] enabled [ 0.536823@2] pstore: Registered ramoops as persistent store backend [ 0.543231@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557274@2] aml_iomap: amlogic iomap probe done [ 0.561991@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563872@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572863@2] audio_clocks: audio_clocks_probe done [ 0.581514@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581571@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586732@2] amlogic auge_snd_iomap probe done [ 0.857904@2] vgaarb: loaded [ 0.858307@2] SCSI subsystem initialized [ 0.859422@2] usbcore: registered new interface driver usbfs [ 0.864897@2] usbcore: registered new interface driver hub [ 0.870414@2] usbcore: registered new device driver usb [ 0.875685@2] Linux video capture interface: v2.00 [ 0.880446@2] pps_core: LinuxPPS API ver. 1 registered [ 0.885529@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894915@2] PTP clock support registered [ 0.903240@2] dmi: Firmware registration failed. [ 0.907297@2] secmon: reserve_mem_size:0x300000 [ 0.908226@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.915156@2] secmon: get page:ffffffbf00140000, 5000 [ 0.919914@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928291@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935027@2] fb: osd_init_module [ 0.939528@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.945083@2] Bluetooth: Core ver 2.22 [ 0.948214@2] NET: Registered protocol family 31 [ 0.952807@2] Bluetooth: HCI device and connection manager initialized [ 0.959372@2] Bluetooth: HCI socket layer initialized [ 0.964434@2] Bluetooth: L2CAP socket layer initialized [ 0.969728@2] Bluetooth: SCO socket layer initialized [ 0.978819@2] NetLabel: Initializing [ 0.978853@2] NetLabel: domain hash size = 128 [ 0.982896@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988125@2] NetLabel: unlabeled traffic allowed by default [ 0.995553@0] clocksource: Switched to clocksource arch_sys_counter [ 1.096081@0] VFS: Disk quotas dquot_6.6.0 [ 1.096181@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.114969@0] NET: Registered protocol family 2 [ 1.115727@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121205@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.127867@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134473@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140415@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147064@0] NET: Registered protocol family 1 [ 1.151942@0] RPC: Registered named UNIX socket transport module. [ 1.157546@0] RPC: Registered udp transport module. [ 1.162430@0] RPC: Registered tcp transport module. [ 1.167333@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175357@0] Unpacking initramfs... [ 1.276975@0] Freeing initrd memory: 2308K [ 1.278415@0] hw perfevents: clusterb_enabled = 0 [ 1.280327@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.284691@0] hw perfevents: cluster A irq = 7 [ 1.289201@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298573@0] audit: initializing netlink subsys (disabled) [ 1.302737@0] audit: type=2000 audit(1.148:1): initialized [ 1.309368@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330336@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332319@0] NFS: Registering the id_resolver key type [ 1.336029@0] Key type id_resolver registered [ 1.340356@0] Key type id_legacy registered [ 1.344872@0] fuse init (API version 7.26) [ 1.353391@0] NET: Registered protocol family 38 [ 1.353437@0] Key type asymmetric registered [ 1.357599@0] Asymmetric key parser 'x509' registered [ 1.362942@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370333@0] io scheduler noop registered (default) [ 1.375266@0] io scheduler deadline registered [ 1.379982@0] io scheduler cfq registered [ 1.394706@1] random: fast init done [ 1.394773@1] random: crng init done [ 1.395290@0] Unable to detect cache hierarchy for CPU 0 [ 1.431594@0] loop: module loaded [ 1.432539@0] zram: Added device: zram0 [ 1.433540@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.440665@0] libphy: Fixed MDIO Bus: probed [ 1.444565@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.449322@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.456899@0] PPP generic driver version 2.4.2 [ 1.460455@0] PPP BSD Compression module registered [ 1.465076@0] PPP Deflate Compression module registered [ 1.470320@0] PPP MPPE Compression module registered [ 1.475290@0] NET: Registered protocol family 24 [ 1.480083@0] usbcore: registered new interface driver asix [ 1.485653@0] usbcore: registered new interface driver ax88179_178a [ 1.491916@0] usbcore: registered new interface driver cdc_ether [ 1.497947@0] usbcore: registered new interface driver net1080 [ 1.503805@0] usbcore: registered new interface driver cdc_subset [ 1.509942@0] usbcore: registered new interface driver zaurus [ 1.515726@0] usbcore: registered new interface driver cdc_ncm [ 1.522156@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.528247@0] ehci-pci: EHCI PCI platform driver [ 1.532992@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.539292@0] ohci-pci: OHCI PCI platform driver [ 1.544483@0] usbcore: registered new interface driver cdc_acm [ 1.549770@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.558105@0] usbcore: registered new interface driver usb-storage [ 1.564353@0] usbcore: registered new interface driver usbserial [ 1.570814@1] mousedev: PS/2 mouse device common for all mice [ 1.576412@1] usbcore: registered new interface driver xpad [ 1.581847@0] i2c /dev entries driver [ 1.585461@0] usbcore: registered new interface driver uvcvideo [ 1.591246@0] USB Video Class driver (1.1.1) [ 1.595528@0] md: linear personality registered for level -1 [ 1.601719@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.611370@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.617199@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.624968@2] usbcore: registered new interface driver usbhid [ 1.628876@2] usbhid: USB HID core driver [ 1.633162@3] ashmem: initialized [ 1.636611@2] logger: created 512K log 'log_main' [ 1.641140@3] logger: created 1K log 'log_events' [ 1.645858@2] logger: created 1K log 'log_radio' [ 1.650521@3] logger: created 16K log 'log_system' [ 1.655127@3] exFAT: Version 1.3.0 [ 1.659864@2] ff803000.serial: clock gate not found [ 1.663455@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.670663@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.685628@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.688214@2] console [ttyS0] enabled [ 1.688214@2] console [ttyS0] enabled [ 1.695423@2] bootconsole [aml_uart0] disabled [ 1.695423@2] bootconsole [aml_uart0] disabled [ 1.704933@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.711374@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.721650@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.731454@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.737982@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.750391@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.754467@0] irq = 20 [ 1.756805@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.765609@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.770051@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.775270@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.781722@0] meson-remote: Driver init [ 1.785695@0] meson-remote: remote_probe [ 1.789288@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.794361@0] meson-remote ff808040.rc: don't find the node [ 1.800904@0] meson-remote ff808040.rc: led_blink = 0 [ 1.805906@0] meson-remote ff808040.rc: don't find the node [ 1.812810@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.818460@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.824154@0] meson-remote ff808040.rc: custom_number = 3 [ 1.829464@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.835151@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.842304@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.848604@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.854751@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.860418@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.867575@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.873871@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.880015@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.885688@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.892845@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.899142@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.905271@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.911993@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.917771@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.923550@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.929242@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.934935@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.940886@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.946752@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.952357@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.957705@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.963052@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.969117@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.976165@1] meson-remote: IR XMP protocol handler initialized [ 1.981721@1] efusekeynum: 4 [ 1.984238@1] efusekeyname: mac offset: 0 size: 6 [ 1.990579@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.996961@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.003350@1] efusekeyname: usid offset: 18 size: 16 [ 2.010012@0] efuse efuse: probe OK! [ 2.015732@1] ge2d: ge2d_init_module [ 2.017335@1] [tsync_pcr_init]init success. [ 2.021874@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.028329@2] DI: di_module_init ok. [ 2.031384@2] dim:dim_module_init [ 2.034736@2] dim:dim_module_init finish [ 2.038368@2] dil:dil_init. [ 2.041302@2] dil:dil_init ok. [ 2.044263@2] vdin_drv_init: major 241 [ 2.048106@2] vdin_drv_init: vdin driver init done [ 2.052600@2] [viuin..]viuin_init_module viuin module init [ 2.058422@2] [viuin..]viuin_probe probe ok. [ 2.062508@2] amlvid:info: amlvideo_init called[ 2.066580@2] amlvid:info: amlvideo_create_instance called [ 2.072020@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.077341@0] amlvideo-000: V4L2 device registered as video10 [ 2.082784@0] amlvid:info: amlvideo_create_instance called [ 2.088210@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.093537@1] amlvideo-001: V4L2 device registered as video23 [ 2.099289@1] PPMGRDRV: warn: ppmgr module init func called [ 2.105477@1] videosync_create_instance dev_s ffffffc01c968400,dev_s->dev ffffffc01d8d4880 [ 2.112725@1] videosync_create_instance reg videosync.0 [ 2.117966@1] aml_vecm_init:module init [ 2.117968@0] videosync_thread started [ 2.125705@1] amdolby_vision_init:module init [ 2.129981@1] prime_sl module init [ 2.133599@1] amlogic mtd driver init [ 2.137325@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.142556@1] bl mode descrete [ 2.145482@1] fip_copies 4 [ 2.148146@1] fip_size 0x200000 [ 2.151242@1] nand_clk_ctrl 0xffe07000 [ 2.154958@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.160588@1] nand_clk_ctrl 0xffe07000 [ 2.164292@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.172608@1] plat->aml_nand_device ffffff800a778cf8 [ 2.177152@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.183116@1] NAND device id: c2 dc 90 a2 57 3 [ 2.187313@1] NAND device: Manufacturer ID: [ 2.191360@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.198019@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.203517@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.209038@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.215340@1] mtd->oobavail: 0x10 [ 2.219174@0] aml_nand_init 2119: plat-name:bootloader [ 2.223718@0] Creating 1 MTD partitions on "bootloader": [ 2.228966@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.237036@0] bootloader initialized ok [ 2.238190@0] plat->aml_nand_device ffffff800a778cf8 [ 2.243128@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.249161@0] NAND device id: c2 dc 90 a2 57 3 [ 2.253291@0] NAND device: Manufacturer ID: [ 2.257343@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.263997@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.269501@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.275020@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.281323@0] mtd->oobavail: 0x10 [ 2.284791@0] aml_nand_init 2119: plat-name:nandnormal [ 2.289721@0] bbt_start=20 [ 2.292354@0] env_start=24 [ 2.295019@0] key_start=32 [ 2.297701@0] dtb_start=40 [ 2.300374@0] ddr_start=44 [ 2.303043@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.309526@0] get_free_node 43: bitmap=0 [ 2.312969@0] get_free_node 55: bitmap=1 [ 2.317053@0] get_free_node 43: bitmap=1 [ 2.320731@0] get_free_node 55: bitmap=3 [ 2.324815@0] get_free_node 43: bitmap=3 [ 2.328493@0] get_free_node 55: bitmap=7 [ 2.332375@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.339014@0] nbbt free list: [ 2.341948@0] blockN=21, ec=-1, dirty_flag=0 [ 2.346173@0] blockN=22, ec=-1, dirty_flag=0 [ 2.350399@0] blockN=23, ec=-1, dirty_flag=0 [ 2.354626@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.360034@0] nbbt valid addr: 500000 [ 2.363244@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.368859@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.375100@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.381511@0] get_free_node 43: bitmap=7 [ 2.384987@0] get_free_node 55: bitmap=f [ 2.389071@0] get_free_node 43: bitmap=f [ 2.392749@0] get_free_node 55: bitmap=1f [ 2.396919@0] get_free_node 43: bitmap=1f [ 2.400684@0] get_free_node 55: bitmap=3f [ 2.404854@0] get_free_node 43: bitmap=3f [ 2.408619@0] get_free_node 55: bitmap=7f [ 2.412789@0] get_free_node 43: bitmap=7f [ 2.416554@0] get_free_node 55: bitmap=ff [ 2.420724@0] get_free_node 43: bitmap=ff [ 2.424488@0] get_free_node 55: bitmap=1ff [ 2.428746@0] get_free_node 43: bitmap=1ff [ 2.432596@0] get_free_node 55: bitmap=3ff [ 2.436651@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.443290@0] nenv free list: [ 2.446223@0] blockN=25, ec=-1, dirty_flag=0 [ 2.450449@0] blockN=26, ec=-1, dirty_flag=0 [ 2.454676@0] blockN=27, ec=-1, dirty_flag=0 [ 2.458902@0] blockN=28, ec=-1, dirty_flag=0 [ 2.463128@0] blockN=29, ec=-1, dirty_flag=0 [ 2.467355@0] blockN=30, ec=-1, dirty_flag=0 [ 2.471581@0] blockN=31, ec=-1, dirty_flag=0 [ 2.475807@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.487565@0] nenv valid addr: 610000 [ 2.487585@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.492024@0] get_free_node 43: bitmap=3ff [ 2.495870@0] get_free_node 55: bitmap=7ff [ 2.500126@0] get_free_node 43: bitmap=7ff [ 2.503977@0] get_free_node 55: bitmap=fff [ 2.508234@0] get_free_node 43: bitmap=fff [ 2.512085@0] get_free_node 55: bitmap=1fff [ 2.516428@0] get_free_node 43: bitmap=1fff [ 2.520365@0] get_free_node 55: bitmap=3fff [ 2.524707@0] get_free_node 43: bitmap=3fff [ 2.528645@0] get_free_node 55: bitmap=7fff [ 2.532987@0] get_free_node 43: bitmap=7fff [ 2.536925@0] get_free_node 55: bitmap=ffff [ 2.541267@0] get_free_node 43: bitmap=ffff [ 2.545205@0] get_free_node 55: bitmap=1ffff [ 2.549633@0] get_free_node 43: bitmap=1ffff [ 2.553657@0] get_free_node 55: bitmap=3ffff [ 2.557882@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.564523@0] nkey free list: [ 2.567448@0] blockN=32, ec=-1, dirty_flag=0 [ 2.571683@0] blockN=33, ec=-1, dirty_flag=0 [ 2.575908@0] blockN=34, ec=-1, dirty_flag=0 [ 2.580134@0] blockN=35, ec=-1, dirty_flag=0 [ 2.584361@0] blockN=36, ec=-1, dirty_flag=0 [ 2.588587@0] blockN=37, ec=-1, dirty_flag=0 [ 2.592813@0] blockN=38, ec=-1, dirty_flag=0 [ 2.597040@0] blockN=39, ec=-1, dirty_flag=0 [ 2.601266@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.606355@0] nkey valid addr: fffffffffffc0000 [ 2.610845@0] aml_nand_key_check 1251 NO key exist [ 2.615585@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.622201@0] get_free_node 43: bitmap=3ffff [ 2.626021@0] get_free_node 55: bitmap=7ffff [ 2.630450@0] get_free_node 43: bitmap=7ffff [ 2.634473@0] get_free_node 55: bitmap=fffff [ 2.638901@0] get_free_node 43: bitmap=fffff [ 2.642926@0] get_free_node 55: bitmap=1fffff [ 2.647252@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.653879@0] ndtb free list: [ 2.656811@0] blockN=41, ec=-1, dirty_flag=0 [ 2.661037@0] blockN=42, ec=-1, dirty_flag=0 [ 2.665263@0] blockN=43, ec=-1, dirty_flag=0 [ 2.669490@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.687481@0] ndtb valid addr: a00000 [ 2.687500@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.691929@0] get_free_node 43: bitmap=1fffff [ 2.696039@0] get_free_node 55: bitmap=3fffff [ 2.700554@0] get_free_node 43: bitmap=3fffff [ 2.704664@0] get_free_node 55: bitmap=7fffff [ 2.708976@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.715616@0] nddr free list: [ 2.718541@0] blockN=44, ec=-1, dirty_flag=0 [ 2.722775@0] blockN=45, ec=-1, dirty_flag=0 [ 2.727002@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.732090@0] nddr valid addr: fffffffffffc0000 [ 2.736576@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.741322@0] tpl: off 16777216, size 8388608 [ 2.807568@0] Creating 7 MTD partitions on "nandnormal": [ 2.807599@0] 0x000001000000-0x000001800000 : "tpl" [ 2.814821@2] 0x000001800000-0x000001a00000 : "misc" [ 2.818711@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.823334@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.830361@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.835155@2] 0x000003b00000-0x000015300000 : "system" [ 2.874024@2] 0x000015300000-0x000020000000 : "data" [ 2.897291@2] nandnormal initialized ok [ 2.897371@2] aml_ubootenv_init: register env chardev [ 2.900755@2] aml_ubootenv_init: register env chardev OK [ 2.905961@2] amlnf_dtb_init: register dtb cdev [ 2.910471@2] amlnf_dtb_init: register dtd cdev OK [ 2.915028@2] mtd_nand_probe 267 , err = 0 [ 2.919787@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.925351@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.932168@2] unifykey: storage in base: 0xffffffc005000000 [ 2.937104@2] unifykey: storage out base: 0xffffffc005040000 [ 2.942687@2] unifykey: storage block base: 0xffffffc005080000 [ 2.948471@2] unifykey: probe done! [ 2.952347@2] unifykey: no efuse-version set, use default value: -1 [ 2.958147@2] unifykey: key unify config unifykey-num is 6 [ 2.963604@2] unifykey: key unify fact unifykey-num is 6 [ 2.968829@2] unifykey: unifykey_devno: ee00000 [ 2.973596@2] unifykey: device unifykeys created ok [ 2.978225@2] unifykey: aml_unifykeys_init done! [ 2.982994@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.989357@2] amlkaraoke init success! [ 2.992489@2] sysled: module init [ 2.995894@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.000870@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.007947@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.014506@2] amlogic rfkill init [ 3.019145@2] dmc_monitor_probe [ 3.020922@2] page_trace_module_init, create sysfs failed [ 3.030556@2] defendkey defendkey: Reserved memory is not enough! [ 3.032078@2] defendkey: probe of defendkey failed with error -22 [ 3.039051@1] usbcore: registered new interface driver snd-usb-audio [ 3.048377@1] asoc debug: aml_audio_controller_probe-130 [ 3.050117@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.055488@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.063279@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.070445@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.076816@1] aml_tdm_platform_probe(), share en = 1[ 3.081557@1] No channel mask node Channel_Mask [ 3.086326@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.091869@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.099831@1] aml_tdm_platform_probe(), share en = 1[ 3.104334@1] No channel mask node Channel_Mask [ 3.109060@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.114631@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.122567@1] aml_tdm_platform_probe(), share en = 1[ 3.127093@1] No channel mask node Channel_Mask [ 3.132686@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.139749@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.147831@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.157914@1] Register vad [ 3.158895@1] check whether to update sound card init data [ 3.164762@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.171705@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.179021@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.184626@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.192302@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.199626@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.205499@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.211987@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.219094@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.225054@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.232012@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.237750@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.244457@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.252564@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.259273@1] snd_card_add_kcontrols card:ffffffc01d803018 [ 3.264349@1] effect_v2 is not init [ 3.267771@1] Failed to add VAD controls [ 3.272023@1] GACT probability NOT on [ 3.275275@1] Mirror/redirect action on [ 3.279090@1] u32 classifier [ 3.281925@1] Actions configured [ 3.285452@1] Netfilter messages via NETLINK v0.30. [ 3.290548@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.296719@1] ctnetlink v0.93: registering with nfnetlink. [ 3.302440@2] xt_time: kernel timezone is -0000 [ 3.306427@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.312637@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.317648@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.323193@2] Initializing XFRM netlink socket [ 3.328179@2] NET: Registered protocol family 10 [ 3.333346@2] mip6: Mobile IPv6 [ 3.335235@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.341087@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.348129@2] NET: Registered protocol family 17 [ 3.351367@2] NET: Registered protocol family 15 [ 3.355979@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.369071@2] Bluetooth: RFCOMM TTY layer initialized [ 3.373957@2] Bluetooth: RFCOMM socket layer initialized [ 3.379235@2] Bluetooth: RFCOMM ver 1.11 [ 3.383090@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.388518@2] Bluetooth: BNEP filters: protocol multicast [ 3.393869@2] Bluetooth: BNEP socket layer initialized [ 3.398954@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.404994@2] Bluetooth: HIDP socket layer initialized [ 3.410184@2] l2tp_core: L2TP core driver, V2.0 [ 3.414584@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.419480@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.425207@2] l2tp_netlink: L2TP netlink interface [ 3.429969@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.435990@2] l2tp_debugfs: L2TP debugfs support [ 3.440524@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.447127@2] NET: Registered protocol family 35 [ 3.451889@2] Key type dns_resolver registered [ 3.457063@2] Registered swp emulation handler [ 3.460475@2] Registered cp15_barrier emulation handler [ 3.465630@2] Registered setend emulation handler [ 3.470348@2] disable EAS feature [ 3.474416@1] registered taskstats version 1 [ 3.487201@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.993469@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.993529@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.001663@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.010137@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.017056@0] hub 1-0:1.0: USB hub found [ 4.020103@0] hub 1-0:1.0: 1 port detected [ 4.024400@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.029651@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.037467@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.046408@2] hub 2-0:1.0: USB hub found [ 4.049544@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.056869@2] usb usb2: Unsupported the hub [ 4.061327@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.069367@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.177841@1] dwc_otg: Core Release: 3.10a [ 4.177925@1] dwc_otg: Setting default values for core params [ 4.182048@1] dwc_otg: curmode: 0, host_only: 0 [ 4.198835@1] dwc_otg: Using Buffer DMA mode [ 4.198857@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.202740@1] dwc_otg: Working on port type = SLAVE [ 4.207572@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.214594@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.224188@1] gxbb_pm: enter meson_pm_probe! [ 4.224228@1] no vddio3v3_en pin[ 4.225864@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.230923@1] gxbb_pm: meson_pm_probe done [ 4.23528®š—™šLMMTSj•Í½¹}Õ…ÉÑ™™áÁÍÁÁÁ¹Í•É¥…±éÑÑåMÁÕÍ•áÑ…±¡á5¥ÉÑÁÁÁÁÁÁ¡…¹•ÅÅÕÉÁÁѽÅÅÕÉÁÁ5)mѹÉÑÙåÕÙÅuÉ••¥¹Õ¹ÕÍ•‘­•É¹•±µ•µ½ÉåéÕÁÕÙ-5)ÿ/dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.454528@1] ubi0: attaching mtd6 [ 4.982977@1] ubi0: scanning is finished [ 4.987041@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.987328@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.994367@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.001225@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.008290@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.014504@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.021832@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.031063@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.040474@1] ubi0: background thread "ubi_bgt0d" started, PID 2002 [ 5.046137@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2005 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.090877@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.092842@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.102818@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.113594@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.119546@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301153@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.359692@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.445455@3] ubi1: attaching mtd7 [ 5.771921@3] ubi1: scanning is finished [ 5.776043@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776162@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783169@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790060@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797124@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803251@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810579@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.819812@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829133@3] ubi1: background thread "ubi_bgt1d" started, PID 2032 UBI device number 1, total 692 L[ 5.838310@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2036 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.861923@2] UBIFS (ubi1:0): recovery needed [ 5.924548@1] UBIFS (ubi1:0): recovery completed [ 5.924706@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.930885@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.940880@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.951572@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.958302@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2124, tid:f300e450 --- 0 Starting sshd: [ 6.934994@1] aml_tdm_open [ 6.944512@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.944549@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.952144@1] aml_tdm_open [ 6.952735@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... OK skip network Init because /sys/class/net/eth0 is not exist Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.053303@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.056974@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B The[ 7.063016@3] asoc-aml-card auge_sound: tdm capture enable layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully[ 7.073986@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.079454@2] cpufreq_interactive: no need to active hmp boost! aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.112369@3] asoc-aml-card auge_sound: tdm playback enable # [ 8.607809@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK [ 10.620424@0] asoc-aml-card auge_sound: tdm capture stop reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.291270@3] asoc-aml-card auge_sound: tdm playback stop [ 13.291511@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.291033@2] mtd_nand_reboot_notifier 35 [ 15.291295@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.299350@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.302979@2] usb usb2: USB disconnect, device number 1 [ 15.312712@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.313658@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.318980@3] usb usb1: USB disconnect, device number 1 [ 15.326885@0] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.347638@0] reboot: Restarting system [ 15.347889@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21794 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015874 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1973996 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129135@0] ftrace: allocating 43519 entries in 170 pages [ 0.209548@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210360@0] CPU0: update cpu_capacity 1024 [ 0.214686@0] ASID allocator initialised with 32768 entries [ 0.252667@0] secmon: can't fine clear_range [ 0.253257@0] EFI services will not be available. [ 0.256093@0] Meson chip version = RevC (25:C - 43:0) [ 0.290029@1] Detected VIPT I-cache on CPU1 [ 0.290091@1] CPU1: update cpu_capacity 1024 [ 0.290094@1] CPU1: Booted secondary processor [410fd034] [ 0.318082@2] Detected VIPT I-cache on CPU2 [ 0.318135@2] CPU2: update cpu_capacity 1024 [ 0.318138@2] CPU2: Booted secondary processor [410fd034] [ 0.346143@3] Detected VIPT I-cache on CPU3 [ 0.346194@3] CPU3: update cpu_capacity 1024 [ 0.346196@3] CPU3: Booted secondary processor [410fd034] [ 0.346287@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390416@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407414@0] CPU: All CPU(s) started at EL2 [ 0.408193@0] alternatives: patching kernel code [ 0.413595@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420729@0] devtmpfs: initialized [ 0.436169@0] DMI not present or invalid. [ 0.436562@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444552@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451117@0] pinctrl core: initialized pinctrl subsystem [ 0.457727@0] NET: Registered protocol family 16 [ 0.481056@0] cpuidle: using governor menu [ 0.481205@0] register canvas platform driver [ 0.483921@0] register rdma platform driver [ 0.489372@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495745@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503224@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509329@0] clkmsr: clkmsr: driver init [ 0.513054@0] codec_mm_module_init [ 0.516485@0] media_configs_system_init [ 0.520622@0] aml_watch_point_probe, in, wp:2 [ 0.526139@0] pstore: using zlib compression [ 0.529549@0] console [pstore-1] enabled [ 0.532877@0] pstore: Registered ramoops as persistent store backend [ 0.539290@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553318@0] aml_iomap: amlogic iomap probe done [ 0.558001@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559916@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568874@0] audio_clocks: audio_clocks_probe done [ 0.577437@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577494@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582668@0] amlogic auge_snd_iomap probe done [ 0.857757@0] vgaarb: loaded [ 0.858159@0] SCSI subsystem initialized [ 0.859272@0] usbcore: registered new interface driver usbfs [ 0.864745@0] usbcore: registered new interface driver hub [ 0.870281@0] usbcore: registered new device driver usb [ 0.875553@0] Linux video capture interface: v2.00 [ 0.880307@0] pps_core: LinuxPPS API ver. 1 registered [ 0.885372@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894763@0] PTP clock support registered [ 0.903105@0] dmi: Firmware registration failed. [ 0.907176@0] secmon: reserve_mem_size:0x300000 [ 0.908075@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915020@0] secmon: get page:ffffffbf00140000, 5000 [ 0.919755@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928143@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.934878@0] fb: osd_init_module [ 0.939330@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.944955@0] Bluetooth: Core ver 2.22 [ 0.948065@0] NET: Registered protocol family 31 [ 0.952665@0] Bluetooth: HCI device and connection manager initialized [ 0.959221@0] Bluetooth: HCI socket layer initialized [ 0.964285@0] Bluetooth: L2CAP socket layer initialized [ 0.969604@0] Bluetooth: SCO socket layer initialized [ 0.978684@0] NetLabel: Initializing [ 0.978718@0] NetLabel: domain hash size = 128 [ 0.982750@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.987983@0] NetLabel: unlabeled traffic allowed by default [ 0.995433@3] clocksource: Switched to clocksource arch_sys_counter [ 1.095932@3] VFS: Disk quotas dquot_6.6.0 [ 1.096040@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.114891@2] NET: Registered protocol family 2 [ 1.115649@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121123@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.127792@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134556@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140353@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147010@1] NET: Registered protocol family 1 [ 1.151876@1] RPC: Registered named UNIX socket transport module. [ 1.157477@1] RPC: Registered udp transport module. [ 1.162361@1] RPC: Registered tcp transport module. [ 1.167253@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175310@1] Unpacking initramfs... [ 1.276949@1] Freeing initrd memory: 2308K [ 1.278364@1] hw perfevents: clusterb_enabled = 0 [ 1.280200@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.284636@1] hw perfevents: cluster A irq = 7 [ 1.289203@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298548@1] audit: initializing netlink subsys (disabled) [ 1.302711@1] audit: type=2000 audit(1.072:1): initialized [ 1.309351@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330253@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332248@1] NFS: Registering the id_resolver key type [ 1.335944@1] Key type id_resolver registered [ 1.340274@1] Key type id_legacy registered [ 1.344785@1] fuse init (API version 7.26) [ 1.353304@1] NET: Registered protocol family 38 [ 1.353350@1] Key type asymmetric registered [ 1.357525@1] Asymmetric key parser 'x509' registered [ 1.362865@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370252@1] io scheduler noop registered (default) [ 1.375186@1] io scheduler deadline registered [ 1.379892@1] io scheduler cfq registered [ 1.394495@0] random: fast init done [ 1.394562@0] random: crng init done [ 1.396028@1] Unable to detect cache hierarchy for CPU 0 [ 1.433422@1] loop: module loaded [ 1.434362@1] zram: Added device: zram0 [ 1.435295@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.442903@1] libphy: Fixed MDIO Bus: probed [ 1.446372@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.451150@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.458715@1] PPP generic driver version 2.4.2 [ 1.462305@1] PPP BSD Compression module registered [ 1.466912@1] PPP Deflate Compression module registered [ 1.472155@1] PPP MPPE Compression module registered [ 1.477124@1] NET: Registered protocol family 24 [ 1.481897@1] usbcore: registered new interface driver asix [ 1.487489@1] usbcore: registered new interface driver ax88179_178a [ 1.493748@1] usbcore: registered new interface driver cdc_ether [ 1.499777@1] usbcore: registered new interface driver net1080 [ 1.505654@1] usbcore: registered new interface driver cdc_subset [ 1.511776@1] usbcore: registered new interface driver zaurus [ 1.517556@1] usbcore: registered new interface driver cdc_ncm [ 1.524015@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.530077@1] ehci-pci: EHCI PCI platform driver [ 1.534806@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.541154@1] ohci-pci: OHCI PCI platform driver [ 1.546323@1] usbcore: registered new interface driver cdc_acm [ 1.551601@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.559925@1] usbcore: registered new interface driver usb-storage [ 1.566183@1] usbcore: registered new interface driver usbserial [ 1.572651@1] mousedev: PS/2 mouse device common for all mice [ 1.578216@1] usbcore: registered new interface driver xpad [ 1.583681@1] i2c /dev entries driver [ 1.587252@1] usbcore: registered new interface driver uvcvideo [ 1.593075@1] USB Video Class driver (1.1.1) [ 1.597349@1] md: linear personality registered for level -1 [ 1.603611@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.613176@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.619043@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.626801@3] usbcore: registered new interface driver usbhid [ 1.630717@3] usbhid: USB HID core driver [ 1.634965@0] ashmem: initialized [ 1.638466@3] logger: created 512K log 'log_main' [ 1.642958@0] logger: created 1K log 'log_events' [ 1.647688@3] logger: created 1K log 'log_radio' [ 1.652321@0] logger: created 16K log 'log_system' [ 1.656946@0] exFAT: Version 1.3.0 [ 1.662239@0] ff803000.serial: clock gate not found [ 1.665322@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.672479@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.687456@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.690036@0] console [ttyS0] enabled [ 1.690036@0] console [ttyS0] enabled [ 1.697252@0] bootconsole [aml_uart0] disabled [ 1.697252@0] bootconsole [aml_uart0] disabled [ 1.706765@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.713219@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.723487@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.733275@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.739824@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.752313@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.756325@1] irq = 20 [ 1.758622@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.767489@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.771893@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.777058@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.783557@1] meson-remote: Driver init [ 1.787519@1] meson-remote: remote_probe [ 1.791098@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.796190@1] meson-remote ff808040.rc: don't find the node [ 1.802742@1] meson-remote ff808040.rc: led_blink = 0 [ 1.807737@1] meson-remote ff808040.rc: don't find the node [ 1.814639@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.820275@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.825981@1] meson-remote ff808040.rc: custom_number = 3 [ 1.831295@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.836976@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.844132@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.850433@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.856579@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.862246@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.869403@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.875699@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.881848@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.887517@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.894674@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.900970@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.907100@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.913822@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.919600@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.925378@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.931071@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.936764@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.942714@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.948580@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.954186@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.959534@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.964881@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.970927@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.977864@2] meson-remote: IR XMP protocol handler initialized [ 1.983575@2] efusekeynum: 4 [ 1.986021@2] efusekeyname: mac offset: 0 size: 6 [ 1.992430@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.998790@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.005170@2] efusekeyname: usid offset: 18 size: 16 [ 2.011821@3] efuse efuse: probe OK! [ 2.017597@1] ge2d: ge2d_init_module [ 2.019115@1] [tsync_pcr_init]init success. [ 2.023743@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.030134@3] DI: di_module_init ok. [ 2.033272@3] dim:dim_module_init [ 2.036550@3] dim:dim_module_init finish [ 2.040214@3] dil:dil_init. [ 2.043156@3] dil:dil_init ok. [ 2.046023@3] vdin_drv_init: major 241 [ 2.049943@3] vdin_drv_init: vdin driver init done [ 2.054431@3] [viuin..]viuin_init_module viuin module init [ 2.060250@3] [viuin..]viuin_probe probe ok. [ 2.064344@3] amlvid:info: amlvideo_init called[ 2.068399@3] amlvid:info: amlvideo_create_instance called [ 2.073816@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.079179@0] amlvideo-000: V4L2 device registered as video10 [ 2.084617@0] amlvid:info: amlvideo_create_instance called [ 2.090036@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.095359@2] amlvideo-001: V4L2 device registered as video23 [ 2.101123@2] PPMGRDRV: warn: ppmgr module init func called [ 2.107304@2] videosync_create_instance dev_s ffffffc01c9e0000,dev_s->dev ffffffc01cf86180 [ 2.114550@2] videosync_create_instance reg videosync.0 [ 2.119802@3] aml_vecm_init:module init [ 2.119803@0] videosync_thread started [ 2.127550@3] amdolby_vision_init:module init [ 2.131820@3] prime_sl module init [ 2.135395@3] amlogic mtd driver init [ 2.139145@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.144382@3] bl mode descrete [ 2.147307@3] fip_copies 4 [ 2.149979@3] fip_size 0x200000 [ 2.153082@3] nand_clk_ctrl 0xffe07000 [ 2.156786@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.162420@3] nand_clk_ctrl 0xffe07000 [ 2.166118@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.174442@3] plat->aml_nand_device ffffff800a778cf8 [ 2.178973@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.184943@3] NAND device id: c2 dc 90 a2 57 3 [ 2.189140@3] NAND device: Manufacturer ID: [ 2.193186@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.199846@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.205345@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.210866@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.217168@3] mtd->oobavail: 0x10 [ 2.220801@1] aml_nand_init 2119: plat-name:bootloader [ 2.225550@1] Creating 1 MTD partitions on "bootloader": [ 2.230865@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.238799@3] bootloader initialized ok [ 2.240049@3] plat->aml_nand_device ffffff800a778cf8 [ 2.244939@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.250983@3] NAND device id: c2 dc 90 a2 57 3 [ 2.255120@3] NAND device: Manufacturer ID: [ 2.259167@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.265831@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.271327@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.276850@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.283151@3] mtd->oobavail: 0x10 [ 2.286773@3] aml_nand_init 2119: plat-name:nandnormal [ 2.291538@3] bbt_start=20 [ 2.294174@3] env_start=24 [ 2.296857@3] key_start=32 [ 2.299529@3] dtb_start=40 [ 2.302195@3] ddr_start=44 [ 2.304879@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.311357@3] get_free_node 43: bitmap=0 [ 2.314798@3] get_free_node 55: bitmap=1 [ 2.318881@3] get_free_node 43: bitmap=1 [ 2.322559@3] get_free_node 55: bitmap=3 [ 2.326643@3] get_free_node 43: bitmap=3 [ 2.330322@3] get_free_node 55: bitmap=7 [ 2.334203@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.340843@3] nbbt free list: [ 2.343776@3] blockN=21, ec=-1, dirty_flag=0 [ 2.348002@3] blockN=22, ec=-1, dirty_flag=0 [ 2.352228@3] blockN=23, ec=-1, dirty_flag=0 [ 2.356455@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.361863@3] nbbt valid addr: 500000 [ 2.365081@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.370694@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.376929@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.383339@3] get_free_node 43: bitmap=7 [ 2.386815@3] get_free_node 55: bitmap=f [ 2.390899@3] get_free_node 43: bitmap=f [ 2.394578@3] get_free_node 55: bitmap=1f [ 2.398748@3] get_free_node 43: bitmap=1f [ 2.402513@3] get_free_node 55: bitmap=3f [ 2.406683@3] get_free_node 43: bitmap=3f [ 2.410448@3] get_free_node 55: bitmap=7f [ 2.414618@3] get_free_node 43: bitmap=7f [ 2.418382@3] get_free_node 55: bitmap=ff [ 2.422552@3] get_free_node 43: bitmap=ff [ 2.426318@3] get_free_node 55: bitmap=1ff [ 2.430574@3] get_free_node 43: bitmap=1ff [ 2.434424@3] get_free_node 55: bitmap=3ff [ 2.438479@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.445119@3] nenv free list: [ 2.448052@3] blockN=25, ec=-1, dirty_flag=0 [ 2.452278@3] blockN=26, ec=-1, dirty_flag=0 [ 2.456504@3] blockN=27, ec=-1, dirty_flag=0 [ 2.460730@3] blockN=28, ec=-1, dirty_flag=0 [ 2.464957@3] blockN=29, ec=-1, dirty_flag=0 [ 2.469183@3] blockN=30, ec=-1, dirty_flag=0 [ 2.473409@3] blockN=31, ec=-1, dirty_flag=0 [ 2.477636@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.489376@3] nenv valid addr: 610000 [ 2.489395@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.493830@3] get_free_node 43: bitmap=3ff [ 2.497680@3] get_free_node 55: bitmap=7ff [ 2.501937@3] get_free_node 43: bitmap=7ff [ 2.505788@3] get_free_node 55: bitmap=fff [ 2.510044@3] get_free_node 43: bitmap=fff [ 2.513896@3] get_free_node 55: bitmap=1fff [ 2.518238@3] get_free_node 43: bitmap=1fff [ 2.522176@3] get_free_node 55: bitmap=3fff [ 2.526518@3] get_free_node 43: bitmap=3fff [ 2.530456@3] get_free_node 55: bitmap=7fff [ 2.534799@3] get_free_node 43: bitmap=7fff [ 2.538736@3] get_free_node 55: bitmap=ffff [ 2.543078@3] get_free_node 43: bitmap=ffff [ 2.547016@3] get_free_node 55: bitmap=1ffff [ 2.551453@3] get_free_node 43: bitmap=1ffff [ 2.555468@3] get_free_node 55: bitmap=3ffff [ 2.559695@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.566334@3] nkey free list: [ 2.569268@3] blockN=32, ec=-1, dirty_flag=0 [ 2.573494@3] blockN=33, ec=-1, dirty_flag=0 [ 2.577720@3] blockN=34, ec=-1, dirty_flag=0 [ 2.581946@3] blockN=35, ec=-1, dirty_flag=0 [ 2.586172@3] blockN=36, ec=-1, dirty_flag=0 [ 2.590399@3] blockN=37, ec=-1, dirty_flag=0 [ 2.594625@3] blockN=38, ec=-1, dirty_flag=0 [ 2.598851@3] blockN=39, ec=-1, dirty_flag=0 [ 2.603078@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.608167@3] nkey valid addr: fffffffffffc0000 [ 2.612657@3] aml_nand_key_check 1251 NO key exist [ 2.617396@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.624014@3] get_free_node 43: bitmap=3ffff [ 2.627832@3] get_free_node 55: bitmap=7ffff [ 2.632262@3] get_free_node 43: bitmap=7ffff [ 2.636284@3] get_free_node 55: bitmap=fffff [ 2.640713@3] get_free_node 43: bitmap=fffff [ 2.644737@3] get_free_node 55: bitmap=1fffff [ 2.649050@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.655690@3] ndtb free list: [ 2.658615@3] blockN=41, ec=-1, dirty_flag=0 [ 2.662849@3] blockN=42, ec=-1, dirty_flag=0 [ 2.667075@3] blockN=43, ec=-1, dirty_flag=0 [ 2.671301@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.689296@3] ndtb valid addr: a00000 [ 2.689316@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.693749@3] get_free_node 43: bitmap=1fffff [ 2.697859@3] get_free_node 55: bitmap=3fffff [ 2.702373@3] get_free_node 43: bitmap=3fffff [ 2.706484@3] get_free_node 55: bitmap=7fffff [ 2.710796@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.717436@3] nddr free list: [ 2.720369@3] blockN=44, ec=-1, dirty_flag=0 [ 2.724595@3] blockN=45, ec=-1, dirty_flag=0 [ 2.728822@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.733910@3] nddr valid addr: fffffffffffc0000 [ 2.738396@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.743142@3] tpl: off 16777216, size 8388608 [ 2.809443@3] Creating 7 MTD partitions on "nandnormal": [ 2.809473@3] 0x000001000000-0x000001800000 : "tpl" [ 2.816700@3] 0x000001800000-0x000001a00000 : "misc" [ 2.820406@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.825151@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.832246@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.837012@0] 0x000003b00000-0x000015300000 : "system" [ 2.876046@0] 0x000015300000-0x000020000000 : "data" [ 2.899343@0] nandnormal initialized ok [ 2.899459@0] aml_ubootenv_init: register env chardev [ 2.902769@0] aml_ubootenv_init: register env chardev OK [ 2.908013@0] amlnf_dtb_init: register dtb cdev [ 2.912512@0] amlnf_dtb_init: register dtd cdev OK [ 2.917081@0] mtd_nand_probe 267 , err = 0 [ 2.921786@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.927405@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.934204@0] unifykey: storage in base: 0xffffffc005000000 [ 2.939158@0] unifykey: storage out base: 0xffffffc005040000 [ 2.944746@0] unifykey: storage block base: 0xffffffc005080000 [ 2.950518@0] unifykey: probe done! [ 2.954414@0] unifykey: no efuse-version set, use default value: -1 [ 2.960201@0] unifykey: key unify config unifykey-num is 6 [ 2.965660@0] unifykey: key unify fact unifykey-num is 6 [ 2.970879@0] unifykey: unifykey_devno: ee00000 [ 2.975648@0] unifykey: device unifykeys created ok [ 2.980276@0] unifykey: aml_unifykeys_init done! [ 2.985047@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.991399@0] amlkaraoke init success! [ 2.994540@0] sysled: module init [ 2.997929@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.002896@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.010045@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.016547@0] amlogic rfkill init [ 3.021214@0] dmc_monitor_probe [ 3.022941@0] page_trace_module_init, create sysfs failed [ 3.028606@0] defendkey defendkey: Reserved memory is not enough! [ 3.034136@0] defendkey: probe of defendkey failed with error -22 [ 3.041136@0] usbcore: registered new interface driver snd-usb-audio [ 3.050436@0] asoc debug: aml_audio_controller_probe-130 [ 3.052258@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.057527@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.065314@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.072499@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.078864@0] aml_tdm_platform_probe(), share en = 1[ 3.083609@0] No channel mask node Channel_Mask [ 3.088398@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.093923@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.101874@0] aml_tdm_platform_probe(), share en = 1[ 3.106381@0] No channel mask node Channel_Mask [ 3.111094@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.116689@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.124644@0] aml_tdm_platform_probe(), share en = 1[ 3.129148@0] No channel mask node Channel_Mask [ 3.134757@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.141850@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.149884@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.159850@0] Register vad [ 3.160939@0] check whether to update sound card init data [ 3.166779@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.173763@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.181068@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.186684@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.194351@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.201682@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.207568@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.214043@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.221116@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.227080@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.233984@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.239794@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.246540@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.254125@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.261342@2] snd_card_add_kcontrols card:ffffffc01ca2e818 [ 3.266402@2] effect_v2 is not init [ 3.269875@2] Failed to add VAD controls [ 3.274071@2] GACT probability NOT on [ 3.277349@2] Mirror/redirect action on [ 3.281123@2] u32 classifier [ 3.283967@2] Actions configured [ 3.287502@2] Netfilter messages via NETLINK v0.30. [ 3.292574@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.298766@2] ctnetlink v0.93: registering with nfnetlink. [ 3.304471@0] xt_time: kernel timezone is -0000 [ 3.308478@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.314676@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.319691@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.325266@0] Initializing XFRM netlink socket [ 3.330232@0] NET: Registered protocol family 10 [ 3.335480@0] mip6: Mobile IPv6 [ 3.337287@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.343112@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.350149@0] NET: Registered protocol family 17 [ 3.353450@0] NET: Registered protocol family 15 [ 3.358021@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.371114@0] Bluetooth: RFCOMM TTY layer initialized [ 3.376007@0] Bluetooth: RFCOMM socket layer initialized [ 3.381289@0] Bluetooth: RFCOMM ver 1.11 [ 3.385142@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.390570@0] Bluetooth: BNEP filters: protocol multicast [ 3.395922@0] Bluetooth: BNEP socket layer initialized [ 3.401009@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.407048@0] Bluetooth: HIDP socket layer initialized [ 3.412211@0] l2tp_core: L2TP core driver, V2.0 [ 3.416630@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.421532@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.427258@0] l2tp_netlink: L2TP netlink interface [ 3.432016@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.438040@0] l2tp_debugfs: L2TP debugfs support [ 3.442577@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.449179@0] NET: Registered protocol family 35 [ 3.453953@0] Key type dns_resolver registered [ 3.459109@0] Registered swp emulation handler [ 3.462585@0] Registered cp15_barrier emulation handler [ 3.467740@0] Registered setend emulation handler [ 3.472399@0] disable EAS feature [ 3.476733@2] registered taskstats version 1 [ 3.489283@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.995488@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.995606@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.003758@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.012148@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.019049@0] hub 1-0:1.0: USB hub found [ 4.022067@0] hub 1-0:1.0: 1 port detected [ 4.026420@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.031671@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.039510@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.048423@1] hub 2-0:1.0: USB hub found [ 4.051557@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.058856@1] usb usb2: Unsupported the hub [ 4.063355@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.071394@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.180031@1] dwc_otg: Core Release: 3.10a [ 4.180076@1] dwc_otg: Setting default values for core params [ 4.184236@1] dwc_otg: curmode: 0, host_only: 0 [ 4.201030@1] dwc_otg: Using Buffer DMA mode [ 4.201052@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.204931@1] dwc_otg: Working on port type = SLAVE [ 4.209763@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.216841@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.226351@1] gxbb_pm: enter meson_pm_probe! [ 4.226390@1] no vddio3v3_en pin[ 4.228060@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.233064@1] gxbb_pm: meson_pm_probe done [ 4.23743¬š—™š¦SSÅuµ•Í½¹}Õ…ÉÑ™™áÁÍÁÁÁ¹Í•É¥…±éÑÑåMÁÕÍ•áÑ…±¡á5¥ÉÑÁÁÁÁÁÁ¡…¹•ÅÅÕÉÁÁѽÅÅÕÉÁÁ5)mѹÉÑåÅÑÉÅuÉ••¥¹Õ¹ÕÍ•‘­•É¹•±µ•µ½ÉåéÕÁÕÙ-5)ÿ/dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.458203@1] ubi0: attaching mtd6 [ 4.987253@1] ubi0: scanning is finished [ 4.991510@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.991796@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.998797@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.005692@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.012771@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.018972@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.026300@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.035577@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.045001@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.050770@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.101971@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.103929@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.113906@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.124684@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.130638@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.313115@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.374104@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.459164@1] ubi1: attaching mtd7 [ 5.785646@1] ubi1: scanning is finished [ 5.789538@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.789652@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.796662@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.803548@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.810613@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.816740@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.824069@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.833301@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.842622@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 LE[ 5.852039@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 Bs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.875790@2] UBIFS (ubi1:0): recovery needed [ 5.932305@0] UBIFS (ubi1:0): recovery completed [ 5.932456@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.938641@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.948641@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.959334@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.966064@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f30d0450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.997115@1] aml_tdm_open [ 7.008654@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.008692@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.015764@1] aml_tdm_open [ 7.016881@1] Not init audio effects Opened TCP tuning in[ 7.023251@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.027845@3] cpufreq_interactive: no need to active hmp boost! terface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.115055@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.118718@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.124986@2] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.173685@2] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687580@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21934 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 34 25 0c 3f 19 01 31 27 0e 40 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976638 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016837@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129134@0] ftrace: allocating 43519 entries in 170 pages [ 0.209461@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210273@0] CPU0: update cpu_capacity 1024 [ 0.214597@0] ASID allocator initialised with 32768 entries [ 0.252579@0] secmon: can't fine clear_range [ 0.253149@0] EFI services will not be available. [ 0.256014@0] Meson chip version = RevC (25:C - 43:0) [ 0.289943@1] Detected VIPT I-cache on CPU1 [ 0.290005@1] CPU1: update cpu_capacity 1024 [ 0.290008@1] CPU1: Booted secondary processor [410fd034] [ 0.318000@2] Detected VIPT I-cache on CPU2 [ 0.318053@2] CPU2: update cpu_capacity 1024 [ 0.318055@2] CPU2: Booted secondary processor [410fd034] [ 0.346068@3] Detected VIPT I-cache on CPU3 [ 0.346117@3] CPU3: update cpu_capacity 1024 [ 0.346120@3] CPU3: Booted secondary processor [410fd034] [ 0.346209@0] Brought up 4 CPUs [ 0.385429@0] SMP: Total of 4 processors activated. [ 0.390338@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396374@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407331@0] CPU: All CPU(s) started at EL2 [ 0.408113@0] alternatives: patching kernel code [ 0.413516@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420652@0] devtmpfs: initialized [ 0.436105@0] DMI not present or invalid. [ 0.436489@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444486@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451037@0] pinctrl core: initialized pinctrl subsystem [ 0.457584@0] NET: Registered protocol family 16 [ 0.476974@0] cpuidle: using governor menu [ 0.477114@0] register canvas platform driver [ 0.479845@0] register rdma platform driver [ 0.485294@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491661@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499152@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505255@0] clkmsr: clkmsr: driver init [ 0.508981@0] codec_mm_module_init [ 0.512409@0] media_configs_system_init [ 0.516543@0] aml_watch_point_probe, in, wp:2 [ 0.521200@0] pstore: using zlib compression [ 0.525468@0] console [pstore-1] enabled [ 0.528799@0] pstore: Registered ramoops as persistent store backend [ 0.535212@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549245@0] aml_iomap: amlogic iomap probe done [ 0.553952@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555840@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564798@0] audio_clocks: audio_clocks_probe done [ 0.573435@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573491@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578668@0] amlogic auge_snd_iomap probe done [ 0.853700@0] vgaarb: loaded [ 0.854087@0] SCSI subsystem initialized [ 0.855206@0] usbcore: registered new interface driver usbfs [ 0.860690@0] usbcore: registered new interface driver hub [ 0.866209@0] usbcore: registered new device driver usb [ 0.871490@0] Linux video capture interface: v2.00 [ 0.876226@0] pps_core: LinuxPPS API ver. 1 registered [ 0.881309@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.890703@0] PTP clock support registered [ 0.899032@0] dmi: Firmware registration failed. [ 0.899835@0] secmon: reserve_mem_size:0x300000 [ 0.904051@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.910936@0] secmon: get page:ffffffbf00140000, 5000 [ 0.915692@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924082@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.930818@0] fb: osd_init_module [ 0.935322@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.940890@0] Bluetooth: Core ver 2.22 [ 0.944008@0] NET: Registered protocol family 31 [ 0.948606@0] Bluetooth: HCI device and connection manager initialized [ 0.955160@0] Bluetooth: HCI socket layer initialized [ 0.960225@0] Bluetooth: L2CAP socket layer initialized [ 0.965545@0] Bluetooth: SCO socket layer initialized [ 0.974631@0] NetLabel: Initializing [ 0.974664@0] NetLabel: domain hash size = 128 [ 0.978689@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.983915@0] NetLabel: unlabeled traffic allowed by default [ 0.991360@2] clocksource: Switched to clocksource arch_sys_counter [ 1.091900@2] VFS: Disk quotas dquot_6.6.0 [ 1.092008@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.110964@2] NET: Registered protocol family 2 [ 1.111754@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.117188@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.123888@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.130494@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.136401@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.143111@3] NET: Registered protocol family 1 [ 1.147931@3] RPC: Registered named UNIX socket transport module. [ 1.153553@3] RPC: Registered udp transport module. [ 1.158441@1] RPC: Registered tcp transport module. [ 1.163332@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.171440@1] Unpacking initramfs... [ 1.273038@2] Freeing initrd memory: 2308K [ 1.274460@2] hw perfevents: clusterb_enabled = 0 [ 1.276260@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.280743@2] hw perfevents: cluster A irq = 7 [ 1.285258@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.294654@2] audit: initializing netlink subsys (disabled) [ 1.298802@2] audit: type=2000 audit(1.068:1): initialized [ 1.305398@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326459@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328444@3] NFS: Registering the id_resolver key type [ 1.332186@3] Key type id_resolver registered [ 1.336478@3] Key type id_legacy registered [ 1.341014@3] fuse init (API version 7.26) [ 1.349458@3] NET: Registered protocol family 38 [ 1.349503@3] Key type asymmetric registered [ 1.353730@3] Asymmetric key parser 'x509' registered [ 1.359066@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366416@3] io scheduler noop registered (default) [ 1.371389@3] io scheduler deadline registered [ 1.376141@3] io scheduler cfq registered [ 1.390761@0] random: fast init done [ 1.390827@0] random: crng init done [ 1.392300@3] Unable to detect cache hierarchy for CPU 0 [ 1.429566@3] loop: module loaded [ 1.430497@3] zram: Added device: zram0 [ 1.431514@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.438722@3] libphy: Fixed MDIO Bus: probed [ 1.442524@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.447314@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.454878@3] PPP generic driver version 2.4.2 [ 1.458446@3] PPP BSD Compression module registered [ 1.463056@3] PPP Deflate Compression module registered [ 1.468304@3] PPP MPPE Compression module registered [ 1.473273@3] NET: Registered protocol family 24 [ 1.478046@3] usbcore: registered new interface driver asix [ 1.483631@3] usbcore: registered new interface driver ax88179_178a [ 1.489894@3] usbcore: registered new interface driver cdc_ether [ 1.495928@3] usbcore: registered new interface driver net1080 [ 1.501793@3] usbcore: registered new interface driver cdc_subset [ 1.507919@3] usbcore: registered new interface driver zaurus [ 1.513703@3] usbcore: registered new interface driver cdc_ncm [ 1.520166@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.526227@3] ehci-pci: EHCI PCI platform driver [ 1.530962@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.537271@3] ohci-pci: OHCI PCI platform driver [ 1.542434@3] usbcore: registered new interface driver cdc_acm [ 1.547751@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.556078@3] usbcore: registered new interface driver usb-storage [ 1.562323@3] usbcore: registered new interface driver usbserial [ 1.568815@1] mousedev: PS/2 mouse device common for all mice [ 1.574400@1] usbcore: registered new interface driver xpad [ 1.579848@3] i2c /dev entries driver [ 1.583434@3] usbcore: registered new interface driver uvcvideo [ 1.589223@3] USB Video Class driver (1.1.1) [ 1.593507@3] md: linear personality registered for level -1 [ 1.599707@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.609322@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.615158@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.622906@1] usbcore: registered new interface driver usbhid [ 1.626860@1] usbhid: USB HID core driver [ 1.631109@0] ashmem: initialized [ 1.634607@1] logger: created 512K log 'log_main' [ 1.639119@0] logger: created 1K log 'log_events' [ 1.643865@1] logger: created 1K log 'log_radio' [ 1.648478@0] logger: created 16K log 'log_system' [ 1.653092@0] exFAT: Version 1.3.0 [ 1.657750@2] ff803000.serial: clock gate not found [ 1.661474@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.668631@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.683607@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.686185@2] console [ttyS0] enabled [ 1.686185@2] console [ttyS0] enabled [ 1.693402@2] bootconsole [aml_uart0] disabled [ 1.693402@2] bootconsole [aml_uart0] disabled [ 1.702901@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.709349@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.719697@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.729471@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.735957@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.748388@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.752446@0] irq = 20 [ 1.754770@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.763726@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.768027@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.773203@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.779730@0] meson-remote: Driver init [ 1.783668@0] meson-remote: remote_probe [ 1.787259@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.792349@0] meson-remote ff808040.rc: don't find the node [ 1.798889@0] meson-remote ff808040.rc: led_blink = 0 [ 1.803889@0] meson-remote ff808040.rc: don't find the node [ 1.810789@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.816439@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.822131@0] meson-remote ff808040.rc: custom_number = 3 [ 1.827444@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.833129@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.840282@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.846583@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.852724@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.858396@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.865553@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.871849@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.877993@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.883666@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.890824@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.897120@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.903249@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.909971@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.915749@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.921528@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.927220@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.932913@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.938864@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.944730@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.950335@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.955683@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.961030@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.967033@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.974009@0] meson-remote: IR XMP protocol handler initialized [ 1.979702@0] efusekeynum: 4 [ 1.982171@0] efusekeyname: mac offset: 0 size: 6 [ 1.988570@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.994946@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.001319@0] efusekeyname: usid offset: 18 size: 16 [ 2.007969@1] efuse efuse: probe OK! [ 2.013527@1] ge2d: ge2d_init_module [ 2.015273@1] [tsync_pcr_init]init success. [ 2.019875@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.026319@3] DI: di_module_init ok. [ 2.029425@3] dim:dim_module_init [ 2.032743@3] dim:dim_module_init finish [ 2.036346@3] dil:dil_init. [ 2.039288@3] dil:dil_init ok. [ 2.042178@3] vdin_drv_init: major 241 [ 2.046110@3] vdin_drv_init: vdin driver init done [ 2.050586@3] [viuin..]viuin_init_module viuin module init [ 2.056416@3] [viuin..]viuin_probe probe ok. [ 2.060499@3] amlvid:info: amlvideo_init called[ 2.064554@3] amlvid:info: amlvideo_create_instance called [ 2.069966@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.075319@1] amlvideo-000: V4L2 device registered as video10 [ 2.080784@1] amlvid:info: amlvideo_create_instance called [ 2.086183@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.091519@0] amlvideo-001: V4L2 device registered as video23 [ 2.097280@0] PPMGRDRV: warn: ppmgr module init func called [ 2.103476@2] videosync_create_instance dev_s ffffffc01ced2400,dev_s->dev ffffffc01da39580 [ 2.110692@2] videosync_create_instance reg videosync.0 [ 2.115957@2] aml_vecm_init:module init [ 2.115958@3] videosync_thread started [ 2.123677@2] amdolby_vision_init:module init [ 2.127957@2] prime_sl module init [ 2.131576@2] amlogic mtd driver init [ 2.135266@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.140536@2] bl mode descrete [ 2.143461@2] fip_copies 4 [ 2.146115@2] fip_size 0x200000 [ 2.149230@2] nand_clk_ctrl 0xffe07000 [ 2.152940@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.158566@2] nand_clk_ctrl 0xffe07000 [ 2.162269@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.170594@2] plat->aml_nand_device ffffff800a778cf8 [ 2.175115@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.181095@2] NAND device id: c2 dc 90 a2 57 3 [ 2.185292@2] NAND device: Manufacturer ID: [ 2.189337@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.195997@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.201495@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.207016@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.213336@2] mtd->oobavail: 0x10 [ 2.216969@1] aml_nand_init 2119: plat-name:bootloader [ 2.221701@1] Creating 1 MTD partitions on "bootloader": [ 2.226953@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.234733@3] bootloader initialized ok [ 2.236199@3] plat->aml_nand_device ffffff800a778cf8 [ 2.241098@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.247131@3] NAND device id: c2 dc 90 a2 57 3 [ 2.251268@3] NAND device: Manufacturer ID: [ 2.255317@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.261974@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.267481@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.273001@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.279300@3] mtd->oobavail: 0x10 [ 2.282784@3] aml_nand_init 2119: plat-name:nandnormal [ 2.287684@3] bbt_start=20 [ 2.290323@3] env_start=24 [ 2.293006@3] key_start=32 [ 2.295679@3] dtb_start=40 [ 2.298344@3] ddr_start=44 [ 2.301028@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.307512@3] get_free_node 43: bitmap=0 [ 2.310938@3] get_free_node 55: bitmap=1 [ 2.315031@3] get_free_node 43: bitmap=1 [ 2.318709@3] get_free_node 55: bitmap=3 [ 2.322793@3] get_free_node 43: bitmap=3 [ 2.326471@3] get_free_node 55: bitmap=7 [ 2.330353@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.336992@3] nbbt free list: [ 2.339926@3] blockN=21, ec=-1, dirty_flag=0 [ 2.344151@3] blockN=22, ec=-1, dirty_flag=0 [ 2.348378@3] blockN=23, ec=-1, dirty_flag=0 [ 2.352604@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.358012@3] nbbt valid addr: 500000 [ 2.361231@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.366836@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.373078@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.379489@3] get_free_node 43: bitmap=7 [ 2.382956@3] get_free_node 55: bitmap=f [ 2.387049@3] get_free_node 43: bitmap=f [ 2.390727@3] get_free_node 55: bitmap=1f [ 2.394897@3] get_free_node 43: bitmap=1f [ 2.398662@3] get_free_node 55: bitmap=3f [ 2.402832@3] get_free_node 43: bitmap=3f [ 2.406597@3] get_free_node 55: bitmap=7f [ 2.410767@3] get_free_node 43: bitmap=7f [ 2.414532@3] get_free_node 55: bitmap=ff [ 2.418702@3] get_free_node 43: bitmap=ff [ 2.422467@3] get_free_node 55: bitmap=1ff [ 2.426724@3] get_free_node 43: bitmap=1ff [ 2.430574@3] get_free_node 55: bitmap=3ff [ 2.434628@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.441268@3] nenv free list: [ 2.444201@3] blockN=25, ec=-1, dirty_flag=0 [ 2.448428@3] blockN=26, ec=-1, dirty_flag=0 [ 2.452654@3] blockN=27, ec=-1, dirty_flag=0 [ 2.456880@3] blockN=28, ec=-1, dirty_flag=0 [ 2.461106@3] blockN=29, ec=-1, dirty_flag=0 [ 2.465333@3] blockN=30, ec=-1, dirty_flag=0 [ 2.469559@3] blockN=31, ec=-1, dirty_flag=0 [ 2.473785@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.485536@3] nenv valid addr: 610000 [ 2.485555@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.489988@3] get_free_node 43: bitmap=3ff [ 2.493838@3] get_free_node 55: bitmap=7ff [ 2.498096@3] get_free_node 43: bitmap=7ff [ 2.501947@3] get_free_node 55: bitmap=fff [ 2.506203@3] get_free_node 43: bitmap=fff [ 2.510054@3] get_free_node 55: bitmap=1fff [ 2.514397@3] get_free_node 43: bitmap=1fff [ 2.518334@3] get_free_node 55: bitmap=3fff [ 2.522677@3] get_free_node 43: bitmap=3fff [ 2.526614@3] get_free_node 55: bitmap=7fff [ 2.530960@3] get_free_node 43: bitmap=7fff [ 2.534894@3] get_free_node 55: bitmap=ffff [ 2.539237@3] get_free_node 43: bitmap=ffff [ 2.543174@3] get_free_node 55: bitmap=1ffff [ 2.547603@3] get_free_node 43: bitmap=1ffff [ 2.551627@3] get_free_node 55: bitmap=3ffff [ 2.555853@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.562493@3] nkey free list: [ 2.565426@3] blockN=32, ec=-1, dirty_flag=0 [ 2.569652@3] blockN=33, ec=-1, dirty_flag=0 [ 2.573878@3] blockN=34, ec=-1, dirty_flag=0 [ 2.578104@3] blockN=35, ec=-1, dirty_flag=0 [ 2.582331@3] blockN=36, ec=-1, dirty_flag=0 [ 2.586557@3] blockN=37, ec=-1, dirty_flag=0 [ 2.590783@3] blockN=38, ec=-1, dirty_flag=0 [ 2.595009@3] blockN=39, ec=-1, dirty_flag=0 [ 2.599236@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.604324@3] nkey valid addr: fffffffffffc0000 [ 2.608809@3] aml_nand_key_check 1251 NO key exist [ 2.613554@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.620168@3] get_free_node 43: bitmap=3ffff [ 2.623991@3] get_free_node 55: bitmap=7ffff [ 2.628437@3] get_free_node 43: bitmap=7ffff [ 2.632443@3] get_free_node 55: bitmap=fffff [ 2.636873@3] get_free_node 43: bitmap=fffff [ 2.640895@3] get_free_node 55: bitmap=1fffff [ 2.645208@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.651848@3] ndtb free list: [ 2.654773@3] blockN=41, ec=-1, dirty_flag=0 [ 2.659007@3] blockN=42, ec=-1, dirty_flag=0 [ 2.663233@3] blockN=43, ec=-1, dirty_flag=0 [ 2.667460@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.685448@3] ndtb valid addr: a00000 [ 2.685468@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.689899@3] get_free_node 43: bitmap=1fffff [ 2.694008@3] get_free_node 55: bitmap=3fffff [ 2.698522@3] get_free_node 43: bitmap=3fffff [ 2.702633@3] get_free_node 55: bitmap=7fffff [ 2.706945@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.713586@3] nddr free list: [ 2.716518@3] blockN=44, ec=-1, dirty_flag=0 [ 2.720745@3] blockN=45, ec=-1, dirty_flag=0 [ 2.724971@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.730060@3] nddr valid addr: fffffffffffc0000 [ 2.734545@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.739292@3] tpl: off 16777216, size 8388608 [ 2.805668@3] Creating 7 MTD partitions on "nandnormal": [ 2.805699@3] 0x000001000000-0x000001800000 : "tpl" [ 2.813121@0] 0x000001800000-0x000001a00000 : "misc" [ 2.816709@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.821557@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.828461@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.833293@2] 0x000003b00000-0x000015300000 : "system" [ 2.872307@2] 0x000015300000-0x000020000000 : "data" [ 2.895544@2] nandnormal initialized ok [ 2.895627@2] aml_ubootenv_init: register env chardev [ 2.898956@2] aml_ubootenv_init: register env chardev OK [ 2.904219@2] amlnf_dtb_init: register dtb cdev [ 2.908727@2] amlnf_dtb_init: register dtd cdev OK [ 2.913281@2] mtd_nand_probe 267 , err = 0 [ 2.917992@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.923610@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.930420@2] unifykey: storage in base: 0xffffffc005000000 [ 2.935361@2] unifykey: storage out base: 0xffffffc005040000 [ 2.940949@2] unifykey: storage block base: 0xffffffc005080000 [ 2.946719@2] unifykey: probe done! [ 2.950611@2] unifykey: no efuse-version set, use default value: -1 [ 2.956397@2] unifykey: key unify config unifykey-num is 6 [ 2.961860@2] unifykey: key unify fact unifykey-num is 6 [ 2.967078@2] unifykey: unifykey_devno: ee00000 [ 2.971845@2] unifykey: device unifykeys created ok [ 2.976475@2] unifykey: aml_unifykeys_init done! [ 2.981249@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.987659@2] amlkaraoke init success! [ 2.990701@2] sysled: module init [ 2.994141@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.999097@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.006216@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.012775@0] amlogic rfkill init [ 3.017371@0] dmc_monitor_probe [ 3.019145@0] page_trace_module_init, create sysfs failed [ 3.024821@0] defendkey defendkey: Reserved memory is not enough! [ 3.030331@0] defendkey: probe of defendkey failed with error -22 [ 3.037291@0] usbcore: registered new interface driver snd-usb-audio [ 3.046545@0] asoc debug: aml_audio_controller_probe-130 [ 3.048523@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.053736@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.061516@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.068691@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.075065@0] aml_tdm_platform_probe(), share en = 1[ 3.079812@0] No channel mask node Channel_Mask [ 3.084578@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.090120@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.098089@0] aml_tdm_platform_probe(), share en = 1[ 3.102587@0] No channel mask node Channel_Mask [ 3.107297@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.112887@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.120845@0] aml_tdm_platform_probe(), share en = 1[ 3.125350@0] No channel mask node Channel_Mask [ 3.130953@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.138004@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.146126@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.156049@0] Register vad [ 3.157127@0] check whether to update sound card init data [ 3.162994@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.169970@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.177269@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.182885@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.190553@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.197884@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.203757@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.210247@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.217401@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.223311@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.230170@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.235999@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.242755@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.250315@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.257603@2] snd_card_add_kcontrols card:ffffffc01c99a018 [ 3.262602@2] effect_v2 is not init [ 3.266029@2] Failed to add VAD controls [ 3.270274@2] GACT probability NOT on [ 3.273557@2] Mirror/redirect action on [ 3.277324@2] u32 classifier [ 3.280162@2] Actions configured [ 3.283703@2] Netfilter messages via NETLINK v0.30. [ 3.288770@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.294968@2] ctnetlink v0.93: registering with nfnetlink. [ 3.300701@1] xt_time: kernel timezone is -0000 [ 3.304681@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.310874@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.315870@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.321473@1] Initializing XFRM netlink socket [ 3.326454@1] NET: Registered protocol family 10 [ 3.331682@1] mip6: Mobile IPv6 [ 3.333489@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.339306@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.346333@1] NET: Registered protocol family 17 [ 3.349662@1] NET: Registered protocol family 15 [ 3.354223@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.367326@1] Bluetooth: RFCOMM TTY layer initialized [ 3.372209@1] Bluetooth: RFCOMM socket layer initialized [ 3.377488@1] Bluetooth: RFCOMM ver 1.11 [ 3.381345@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.386772@1] Bluetooth: BNEP filters: protocol multicast [ 3.392124@1] Bluetooth: BNEP socket layer initialized [ 3.397210@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.403249@1] Bluetooth: HIDP socket layer initialized [ 3.408411@1] l2tp_core: L2TP core driver, V2.0 [ 3.412832@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.417733@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.423460@1] l2tp_netlink: L2TP netlink interface [ 3.428217@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.434241@1] l2tp_debugfs: L2TP debugfs support [ 3.438778@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.445381@1] NET: Registered protocol family 35 [ 3.450154@1] Key type dns_resolver registered [ 3.455319@1] Registered swp emulation handler [ 3.458803@1] Registered cp15_barrier emulation handler [ 3.463948@1] Registered setend emulation handler [ 3.468600@1] disable EAS feature [ 3.472790@0] registered taskstats version 1 [ 3.485551@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.991776@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.991843@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.999981@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.008444@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.015304@2] hub 1-0:1.0: USB hub found [ 4.018361@2] hub 1-0:1.0: 1 port detected [ 4.022703@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.027958@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.035810@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.044714@0] hub 2-0:1.0: USB hub found [ 4.047843@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.055132@0] usb usb2: Unsupported the hub [ 4.059659@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.067711@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.176103@0] dwc_otg: Core Release: 3.10a [ 4.176193@0] dwc_otg: Setting default values for core params [ 4.180293@0] dwc_otg: curmode: 0, host_only: 0 [ 4.197090@0] dwc_otg: Using Buffer DMA mode [ 4.197113@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.200994@0] dwc_otg: Working on port type = SLAVE [ 4.205826@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.212903@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.222437@0] gxbb_pm: enter meson_pm_probe! [ 4.222475@0] no vddio3v3_en pin[ 4.224152@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.229153@0] gxbb_pm: meson_pm_probe done [ 4.23352[ 4.239804@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.245232@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.454323@1] ubi0: attaching mtd6 [ 4.982738@1] ubi0: scanning is finished [ 4.986846@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.987135@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.994146@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.001028@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.008096@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.014312@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.021638@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.030870@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.040282@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.046139@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.091012@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.092976@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.102995@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.113730@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.119680@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301162@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.362204@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.446074@0] ubi1: attaching mtd7 [ 5.772497@0] ubi1: scanning is finished [ 5.776376@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776495@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783502@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790390@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797457@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803583@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810912@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.820144@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829466@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.838817@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.862518@1] UBIFS (ubi1:0): recovery needed [ 5.919778@1] UBIFS (ubi1:0): recovery completed [ 5.919931@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.926117@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.936114@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.946807@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.953537@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2d6a450 --- 0 Starting sshd: [ 6.937861@0] aml_tdm_open [ 6.949313@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.949349@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.956317@0] aml_tdm_open [ 6.957544@0] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... OK skip network Init because /sys/class/net/eth0 is not exist Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.058112@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.060596@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.060599@1] cpufreq_interactive: no need to active hmp boost! [ 7.073312@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.079549@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 # [ 7.128192@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687513@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.275518@2] asoc-aml-card auge_sound: tdm playback stop [ 14.275802@1] asoc-aml-card auge_sound: tdm capture stop [ 14.280913@1] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.281619@0] mtd_nand_reboot_notifier 35 [ 16.281880@0] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.289944@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.293570@0] usb usb2: USB disconnect, device number 1 [ 16.303025@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.304122@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.309265@1] usb usb1: USB disconnect, device number 1 [ 16.315202@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.335368@0] reboot: Restarting system [ 16.335488@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21797 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015880 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1973803 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016835@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036441@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129133@0] ftrace: allocating 43519 entries in 170 pages [ 0.209562@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210378@0] CPU0: update cpu_capacity 1024 [ 0.214705@0] ASID allocator initialised with 32768 entries [ 0.252690@0] secmon: can't fine clear_range [ 0.253273@0] EFI services will not be available. [ 0.256117@0] Meson chip version = RevC (25:C - 43:0) [ 0.290051@1] Detected VIPT I-cache on CPU1 [ 0.290113@1] CPU1: update cpu_capacity 1024 [ 0.290115@1] CPU1: Booted secondary processor [410fd034] [ 0.318105@2] Detected VIPT I-cache on CPU2 [ 0.318157@2] CPU2: update cpu_capacity 1024 [ 0.318159@2] CPU2: Booted secondary processor [410fd034] [ 0.346160@3] Detected VIPT I-cache on CPU3 [ 0.346209@3] CPU3: update cpu_capacity 1024 [ 0.346211@3] CPU3: Booted secondary processor [410fd034] [ 0.346300@0] Brought up 4 CPUs [ 0.385516@0] SMP: Total of 4 processors activated. [ 0.390425@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396461@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407422@0] CPU: All CPU(s) started at EL2 [ 0.408201@0] alternatives: patching kernel code [ 0.413606@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420739@0] devtmpfs: initialized [ 0.436187@0] DMI not present or invalid. [ 0.436572@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444573@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451131@0] pinctrl core: initialized pinctrl subsystem [ 0.457661@0] NET: Registered protocol family 16 [ 0.477062@0] cpuidle: using governor menu [ 0.477209@0] register canvas platform driver [ 0.479935@0] register rdma platform driver [ 0.485383@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491749@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499245@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505329@0] clkmsr: clkmsr: driver init [ 0.509067@0] codec_mm_module_init [ 0.512495@0] media_configs_system_init [ 0.516637@0] aml_watch_point_probe, in, wp:2 [ 0.522176@0] pstore: using zlib compression [ 0.525559@0] console [pstore-1] enabled [ 0.528886@0] pstore: Registered ramoops as persistent store backend [ 0.535302@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549340@0] aml_iomap: amlogic iomap probe done [ 0.553990@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555935@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564893@0] audio_clocks: audio_clocks_probe done [ 0.573431@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573486@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578649@0] amlogic auge_snd_iomap probe done [ 0.861753@0] vgaarb: loaded [ 0.862146@0] SCSI subsystem initialized [ 0.863282@0] usbcore: registered new interface driver usbfs [ 0.868752@0] usbcore: registered new interface driver hub [ 0.874276@0] usbcore: registered new device driver usb [ 0.879558@0] Linux video capture interface: v2.00 [ 0.884323@0] pps_core: LinuxPPS API ver. 1 registered [ 0.889369@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898768@0] PTP clock support registered [ 0.907116@0] dmi: Firmware registration failed. [ 0.911180@0] secmon: reserve_mem_size:0x300000 [ 0.912074@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.919036@0] secmon: get page:ffffffbf00140000, 5000 [ 0.923752@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932141@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938878@0] fb: osd_init_module [ 0.943341@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.948954@0] Bluetooth: Core ver 2.22 [ 0.952068@0] NET: Registered protocol family 31 [ 0.956674@0] Bluetooth: HCI device and connection manager initialized [ 0.963221@0] Bluetooth: HCI socket layer initialized [ 0.968283@0] Bluetooth: L2CAP socket layer initialized [ 0.973604@0] Bluetooth: SCO socket layer initialized [ 0.979145@0] NetLabel: Initializing [ 0.982184@0] NetLabel: domain hash size = 128 [ 0.986834@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.991995@0] NetLabel: unlabeled traffic allowed by default [ 0.999434@1] clocksource: Switched to clocksource arch_sys_counter [ 1.100009@1] VFS: Disk quotas dquot_6.6.0 [ 1.100117@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118796@3] NET: Registered protocol family 2 [ 1.119584@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.125006@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131708@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.138334@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.144222@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.150929@1] NET: Registered protocol family 1 [ 1.155761@1] RPC: Registered named UNIX socket transport module. [ 1.161382@1] RPC: Registered udp transport module. [ 1.166264@1] RPC: Registered tcp transport module. [ 1.171154@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179222@1] Unpacking initramfs... [ 1.280786@1] Freeing initrd memory: 2308K [ 1.282208@1] hw perfevents: clusterb_enabled = 0 [ 1.284130@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.288495@1] hw perfevents: cluster A irq = 7 [ 1.293007@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.302374@1] audit: initializing netlink subsys (disabled) [ 1.306544@1] audit: type=2000 audit(1.072:1): initialized [ 1.313211@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.334173@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.336316@1] NFS: Registering the id_resolver key type [ 1.339859@1] Key type id_resolver registered [ 1.344186@1] Key type id_legacy registered [ 1.348726@1] fuse init (API version 7.26) [ 1.357221@1] NET: Registered protocol family 38 [ 1.357265@1] Key type asymmetric registered [ 1.361441@1] Asymmetric key parser 'x509' registered [ 1.366787@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.374135@1] io scheduler noop registered (default) [ 1.379106@1] io scheduler deadline registered [ 1.383862@1] io scheduler cfq registered [ 1.398443@0] random: fast init done [ 1.398512@0] random: crng init done [ 1.399987@1] Unable to detect cache hierarchy for CPU 0 [ 1.437210@1] loop: module loaded [ 1.442184@1] zram: Added device: zram0 [ 1.442664@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.447987@1] libphy: Fixed MDIO Bus: probed [ 1.451795@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.456593@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.464188@1] PPP generic driver version 2.4.2 [ 1.467709@1] PPP BSD Compression module registered [ 1.472350@1] PPP Deflate Compression module registered [ 1.477592@1] PPP MPPE Compression module registered [ 1.482559@1] NET: Registered protocol family 24 [ 1.487345@1] usbcore: registered new interface driver asix [ 1.492922@1] usbcore: registered new interface driver ax88179_178a [ 1.499194@1] usbcore: registered new interface driver cdc_ether [ 1.505229@1] usbcore: registered new interface driver net1080 [ 1.511081@1] usbcore: registered new interface driver cdc_subset [ 1.517225@1] usbcore: registered new interface driver zaurus [ 1.523001@1] usbcore: registered new interface driver cdc_ncm [ 1.529431@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.535518@1] ehci-pci: EHCI PCI platform driver [ 1.540261@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.546564@1] ohci-pci: OHCI PCI platform driver [ 1.551780@1] usbcore: registered new interface driver cdc_acm [ 1.557041@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.565371@1] usbcore: registered new interface driver usb-storage [ 1.571622@1] usbcore: registered new interface driver usbserial [ 1.578158@3] mousedev: PS/2 mouse device common for all mice [ 1.583710@3] usbcore: registered new interface driver xpad [ 1.589131@1] i2c /dev entries driver [ 1.592734@1] usbcore: registered new interface driver uvcvideo [ 1.598512@1] USB Video Class driver (1.1.1) [ 1.602792@1] md: linear personality registered for level -1 [ 1.609002@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.618574@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.624449@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.632295@3] usbcore: registered new interface driver usbhid [ 1.636159@3] usbhid: USB HID core driver [ 1.640392@0] ashmem: initialized [ 1.643878@3] logger: created 512K log 'log_main' [ 1.648420@0] logger: created 1K log 'log_events' [ 1.653129@2] logger: created 1K log 'log_radio' [ 1.657769@0] logger: created 16K log 'log_system' [ 1.662390@0] exFAT: Version 1.3.0 [ 1.667311@3] ff803000.serial: clock gate not found [ 1.670782@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.677923@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.692898@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.695484@3] console [ttyS0] enabled [ 1.695484@3] console [ttyS0] enabled [ 1.702694@3] bootconsole [aml_uart0] disabled [ 1.702694@3] bootconsole [aml_uart0] disabled [ 1.712211@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.718652@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.728943@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.738755@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.745266@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.757696@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.761776@3] irq = 20 [ 1.764072@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.772947@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.777328@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.782503@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.788999@3] meson-remote: Driver init [ 1.792960@3] meson-remote: remote_probe [ 1.796577@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.801621@3] meson-remote ff808040.rc: don't find the node [ 1.808180@3] meson-remote ff808040.rc: led_blink = 0 [ 1.813182@3] meson-remote ff808040.rc: don't find the node [ 1.820076@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.825720@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.831427@3] meson-remote ff808040.rc: custom_number = 3 [ 1.836735@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.842421@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.849576@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.855871@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.862019@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.867687@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.874849@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.881141@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.887286@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.892958@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.900116@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.906412@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.912541@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.919264@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.925042@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.930820@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.936513@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.942205@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.948157@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.954021@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.959628@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.964975@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.970323@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.976386@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.983326@0] meson-remote: IR XMP protocol handler initialized [ 1.988969@0] efusekeynum: 4 [ 1.991484@0] efusekeyname: mac offset: 0 size: 6 [ 1.997867@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.004235@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.010611@0] efusekeyname: usid offset: 18 size: 16 [ 2.017253@1] efuse efuse: probe OK! [ 2.022768@1] ge2d: ge2d_init_module [ 2.024636@1] [tsync_pcr_init]init success. [ 2.029126@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.035648@1] DI: di_module_init ok. [ 2.038672@1] dim:dim_module_init [ 2.041984@1] dim:dim_module_init finish [ 2.045641@1] dil:dil_init. [ 2.048630@1] dil:dil_init ok. [ 2.051474@1] vdin_drv_init: major 241 [ 2.055349@1] vdin_drv_init: vdin driver init done [ 2.059869@1] [viuin..]viuin_init_module viuin module init [ 2.065695@1] [viuin..]viuin_probe probe ok. [ 2.069789@1] amlvid:info: amlvideo_init called[ 2.073845@1] amlvid:info: amlvideo_create_instance called [ 2.079273@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.084770@1] amlvideo-000: V4L2 device registered as video10 [ 2.090060@1] amlvid:info: amlvideo_create_instance called [ 2.095480@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.100819@0] amlvideo-001: V4L2 device registered as video23 [ 2.106576@0] PPMGRDRV: warn: ppmgr module init func called [ 2.112827@0] videosync_create_instance dev_s ffffffc01c8c7400,dev_s->dev ffffffc01cf64400 [ 2.120019@0] videosync_create_instance reg videosync.0 [ 2.125414@0] aml_vecm_init:module init [ 2.125415@1] videosync_thread started [ 2.132985@0] amdolby_vision_init:module init [ 2.137266@0] prime_sl module init [ 2.140879@0] amlogic mtd driver init [ 2.144600@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.149816@0] bl mode descrete [ 2.152745@0] fip_copies 4 [ 2.155407@0] fip_size 0x200000 [ 2.158512@0] nand_clk_ctrl 0xffe07000 [ 2.162228@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.167867@0] nand_clk_ctrl 0xffe07000 [ 2.171568@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.179888@0] plat->aml_nand_device ffffff800a778cf8 [ 2.184403@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.190384@0] NAND device id: c2 dc 90 a2 57 3 [ 2.194579@0] NAND device: Manufacturer ID: [ 2.198628@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.205287@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.210787@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.216308@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.222610@0] mtd->oobavail: 0x10 [ 2.226233@1] aml_nand_init 2119: plat-name:bootloader [ 2.230999@1] Creating 1 MTD partitions on "bootloader": [ 2.236255@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.243837@1] bootloader initialized ok [ 2.245461@1] plat->aml_nand_device ffffff800a778cf8 [ 2.250395@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.256430@1] NAND device id: c2 dc 90 a2 57 3 [ 2.260561@1] NAND device: Manufacturer ID: [ 2.264614@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.271269@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.276774@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.282292@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.288597@1] mtd->oobavail: 0x10 [ 2.292024@1] aml_nand_init 2119: plat-name:nandnormal [ 2.296995@1] bbt_start=20 [ 2.299626@1] env_start=24 [ 2.302290@1] key_start=32 [ 2.304975@1] dtb_start=40 [ 2.307646@1] ddr_start=44 [ 2.310326@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.316803@1] get_free_node 43: bitmap=0 [ 2.320240@1] get_free_node 55: bitmap=1 [ 2.324323@1] get_free_node 43: bitmap=1 [ 2.328001@1] get_free_node 55: bitmap=3 [ 2.332086@1] get_free_node 43: bitmap=3 [ 2.335764@1] get_free_node 55: bitmap=7 [ 2.339645@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.346285@1] nbbt free list: [ 2.349218@1] blockN=21, ec=-1, dirty_flag=0 [ 2.353444@1] blockN=22, ec=-1, dirty_flag=0 [ 2.357670@1] blockN=23, ec=-1, dirty_flag=0 [ 2.361897@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.367304@1] nbbt valid addr: 500000 [ 2.370523@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.376128@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.382370@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.388781@1] get_free_node 43: bitmap=7 [ 2.392257@1] get_free_node 55: bitmap=f [ 2.396341@1] get_free_node 43: bitmap=f [ 2.400020@1] get_free_node 55: bitmap=1f [ 2.404190@1] get_free_node 43: bitmap=1f [ 2.407955@1] get_free_node 55: bitmap=3f [ 2.412125@1] get_free_node 43: bitmap=3f [ 2.415890@1] get_free_node 55: bitmap=7f [ 2.420060@1] get_free_node 43: bitmap=7f [ 2.423824@1] get_free_node 55: bitmap=ff [ 2.427995@1] get_free_node 43: bitmap=ff [ 2.431760@1] get_free_node 55: bitmap=1ff [ 2.436016@1] get_free_node 43: bitmap=1ff [ 2.439872@1] get_free_node 55: bitmap=3ff [ 2.443921@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.450561@1] nenv free list: [ 2.453494@1] blockN=25, ec=-1, dirty_flag=0 [ 2.457720@1] blockN=26, ec=-1, dirty_flag=0 [ 2.461946@1] blockN=27, ec=-1, dirty_flag=0 [ 2.466172@1] blockN=28, ec=-1, dirty_flag=0 [ 2.470399@1] blockN=29, ec=-1, dirty_flag=0 [ 2.474625@1] blockN=30, ec=-1, dirty_flag=0 [ 2.478851@1] blockN=31, ec=-1, dirty_flag=0 [ 2.483077@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.494824@1] nenv valid addr: 610000 [ 2.494844@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.499272@1] get_free_node 43: bitmap=3ff [ 2.503129@1] get_free_node 55: bitmap=7ff [ 2.507405@1] get_free_node 43: bitmap=7ff [ 2.511230@1] get_free_node 55: bitmap=fff [ 2.515488@1] get_free_node 43: bitmap=fff [ 2.519329@1] get_free_node 55: bitmap=1fff [ 2.523681@1] get_free_node 43: bitmap=1fff [ 2.527618@1] get_free_node 55: bitmap=3fff [ 2.531961@1] get_free_node 43: bitmap=3fff [ 2.535898@1] get_free_node 55: bitmap=7fff [ 2.540241@1] get_free_node 43: bitmap=7fff [ 2.544178@1] get_free_node 55: bitmap=ffff [ 2.548521@1] get_free_node 43: bitmap=ffff [ 2.552458@1] get_free_node 55: bitmap=1ffff [ 2.556887@1] get_free_node 43: bitmap=1ffff [ 2.560910@1] get_free_node 55: bitmap=3ffff [ 2.565136@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.571776@1] nkey free list: [ 2.574702@1] blockN=32, ec=-1, dirty_flag=0 [ 2.578936@1] blockN=33, ec=-1, dirty_flag=0 [ 2.583162@1] blockN=34, ec=-1, dirty_flag=0 [ 2.587388@1] blockN=35, ec=-1, dirty_flag=0 [ 2.591614@1] blockN=36, ec=-1, dirty_flag=0 [ 2.595840@1] blockN=37, ec=-1, dirty_flag=0 [ 2.600067@1] blockN=38, ec=-1, dirty_flag=0 [ 2.604293@1] blockN=39, ec=-1, dirty_flag=0 [ 2.608519@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.613608@1] nkey valid addr: fffffffffffc0000 [ 2.618093@1] aml_nand_key_check 1251 NO key exist [ 2.622838@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.629452@1] get_free_node 43: bitmap=3ffff [ 2.633284@1] get_free_node 55: bitmap=7ffff [ 2.637706@1] get_free_node 43: bitmap=7ffff [ 2.641727@1] get_free_node 55: bitmap=fffff [ 2.646157@1] get_free_node 43: bitmap=fffff [ 2.650179@1] get_free_node 55: bitmap=1fffff [ 2.654491@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.661132@1] ndtb free list: [ 2.664064@1] blockN=41, ec=-1, dirty_flag=0 [ 2.668291@1] blockN=42, ec=-1, dirty_flag=0 [ 2.672517@1] blockN=43, ec=-1, dirty_flag=0 [ 2.676743@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.694734@1] ndtb valid addr: a00000 [ 2.694754@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.699182@1] get_free_node 43: bitmap=1fffff [ 2.703292@1] get_free_node 55: bitmap=3fffff [ 2.707808@1] get_free_node 43: bitmap=3fffff [ 2.711917@1] get_free_node 55: bitmap=7fffff [ 2.716229@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.722869@1] nddr free list: [ 2.725802@1] blockN=44, ec=-1, dirty_flag=0 [ 2.730028@1] blockN=45, ec=-1, dirty_flag=0 [ 2.734255@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.739344@1] nddr valid addr: fffffffffffc0000 [ 2.743829@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.748576@1] tpl: off 16777216, size 8388608 [ 2.814856@1] Creating 7 MTD partitions on "nandnormal": [ 2.814886@1] 0x000001000000-0x000001800000 : "tpl" [ 2.821942@1] 0x000001800000-0x000001a00000 : "misc" [ 2.826170@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.830808@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.837868@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.842459@0] 0x000003b00000-0x000015300000 : "system" [ 2.881571@0] 0x000015300000-0x000020000000 : "data" [ 2.904834@0] nandnormal initialized ok [ 2.904914@0] aml_ubootenv_init: register env chardev [ 2.908275@0] aml_ubootenv_init: register env chardev OK [ 2.913511@0] amlnf_dtb_init: register dtb cdev [ 2.918025@0] amlnf_dtb_init: register dtd cdev OK [ 2.922581@0] mtd_nand_probe 267 , err = 0 [ 2.927293@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.932901@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.939748@0] unifykey: storage in base: 0xffffffc005000000 [ 2.944643@0] unifykey: storage out base: 0xffffffc005040000 [ 2.950233@0] unifykey: storage block base: 0xffffffc005080000 [ 2.956016@0] unifykey: probe done! [ 2.959918@0] unifykey: no efuse-version set, use default value: -1 [ 2.965689@0] unifykey: key unify config unifykey-num is 6 [ 2.971152@0] unifykey: key unify fact unifykey-num is 6 [ 2.976371@0] unifykey: unifykey_devno: ee00000 [ 2.981138@0] unifykey: device unifykeys created ok [ 2.985764@0] unifykey: aml_unifykeys_init done! [ 2.990538@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.996877@0] amlkaraoke init success! [ 3.000030@0] sysled: module init [ 3.003390@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.008396@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.015554@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.022041@0] amlogic rfkill init [ 3.026667@3] dmc_monitor_probe [ 3.028492@3] page_trace_module_init, create sysfs failed [ 3.034106@3] defendkey defendkey: Reserved memory is not enough! [ 3.039658@3] defendkey: probe of defendkey failed with error -22 [ 3.046595@3] usbcore: registered new interface driver snd-usb-audio [ 3.055908@3] asoc debug: aml_audio_controller_probe-130 [ 3.057687@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.063037@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.070819@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.077987@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.084364@3] aml_tdm_platform_probe(), share en = 1[ 3.089100@3] No channel mask node Channel_Mask [ 3.093899@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.099422@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.107368@3] aml_tdm_platform_probe(), share en = 1[ 3.111879@3] No channel mask node Channel_Mask [ 3.116613@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.122178@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.130112@3] aml_tdm_platform_probe(), share en = 1[ 3.134640@3] No channel mask node Channel_Mask [ 3.140239@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.147294@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.155376@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.165265@3] Register vad [ 3.166421@3] check whether to update sound card init data [ 3.172288@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.179251@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.186566@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.192173@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.199848@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.207173@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.213049@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.219532@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.226567@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.232579@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.239542@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.245289@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.252001@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.260000@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.266810@3] snd_card_add_kcontrols card:ffffffc01c962818 [ 3.271890@3] effect_v2 is not init [ 3.275307@3] Failed to add VAD controls [ 3.279587@3] GACT probability NOT on [ 3.282823@3] Mirror/redirect action on [ 3.286654@3] u32 classifier [ 3.289457@3] Actions configured [ 3.293000@3] Netfilter messages via NETLINK v0.30. [ 3.298091@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.304282@3] ctnetlink v0.93: registering with nfnetlink. [ 3.309971@0] xt_time: kernel timezone is -0000 [ 3.313985@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.320171@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.325188@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.330742@0] Initializing XFRM netlink socket [ 3.335771@0] NET: Registered protocol family 10 [ 3.340901@0] mip6: Mobile IPv6 [ 3.342779@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.348619@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.355685@0] NET: Registered protocol family 17 [ 3.358913@0] NET: Registered protocol family 15 [ 3.363534@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.376607@0] Bluetooth: RFCOMM TTY layer initialized [ 3.381503@0] Bluetooth: RFCOMM socket layer initialized [ 3.386783@0] Bluetooth: RFCOMM ver 1.11 [ 3.390637@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.396064@0] Bluetooth: BNEP filters: protocol multicast [ 3.401415@0] Bluetooth: BNEP socket layer initialized [ 3.406501@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.412540@0] Bluetooth: HIDP socket layer initialized [ 3.417715@0] l2tp_core: L2TP core driver, V2.0 [ 3.422137@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.427026@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.432753@0] l2tp_netlink: L2TP netlink interface [ 3.437518@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.443535@0] l2tp_debugfs: L2TP debugfs support [ 3.448070@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.454672@0] NET: Registered protocol family 35 [ 3.459447@0] Key type dns_resolver registered [ 3.464597@0] Registered swp emulation handler [ 3.468016@0] Registered cp15_barrier emulation handler [ 3.473182@0] Registered setend emulation handler [ 3.477886@0] disable EAS feature [ 3.481989@2] registered taskstats version 1 [ 3.494800@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.001059@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.001117@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.009284@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.017728@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.024690@0] hub 1-0:1.0: USB hub found [ 4.027644@0] hub 1-0:1.0: 1 port detected [ 4.031978@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.037246@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.045069@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.054029@2] hub 2-0:1.0: USB hub found [ 4.057171@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.064419@2] usb usb2: Unsupported the hub [ 4.068941@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.076955@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.185454@3] dwc_otg: Core Release: 3.10a [ 4.185516@3] dwc_otg: Setting default values for core params [ 4.189661@3] dwc_otg: curmode: 0, host_only: 0 [ 4.206458@3] dwc_otg: Using Buffer DMA mode [ 4.206481@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.210365@3] dwc_otg: Working on port type = SLAVE [ 4.215197@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.222240@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.231819@3] gxbb_pm: enter meson_pm_probe! [ 4.231857@3] no vddio3v3_en pin[ 4.233496@3] pm-meson aml_pm: Can't get switch_clk81 [ 4.238550@3] gxbb_pm: meson_pm_probe done [ 4.24292Q 4.249198@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.254600@3] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.462195@1] ubi0: attaching mtd6 [ 4.990889@1] ubi0: scanning is finished [ 4.995391@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.995708@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.002667@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.009566@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.016643@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.022848@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.030184@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.039475@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.048887@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.054715@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.099529@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.101455@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.111472@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.122245@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.128197@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301323@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.359328@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.446241@2] ubi1: attaching mtd7 [ 5.773010@2] ubi1: scanning is finished [ 5.776790@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.777006@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.784015@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790903@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797969@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.804096@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.811424@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.820656@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829978@2] ubi1: background thread "ubi_bgt1d" started, PID 2035 UBI device number 1, total 692 L[ 5.839398@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2039 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.863202@0] UBIFS (ubi1:0): recovery needed [ 5.922273@0] UBIFS (ubi1:0): recovery completed [ 5.922435@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.928619@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.938612@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.949303@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.956032@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2127, tid:f3114450 --- 0 [ 6.977900@0] aml_tdm_open [ 6.987760@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.987803@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.994579@0] aml_tdm_open [ 6.996027@0] Not init audio effects OK skip network Init because /sys/class/net/eth0 is not exist Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.019349@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.019404@3] cpufreq_interactive: no need to active hmp boost! Audio Stop Callback: Stopping audio stream # Audio Start Callback: Starting audio stream [ 7.094363@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.098048@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.103941@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.153155@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.691592@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22019 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015884 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976822 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016841@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106553@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129132@0] ftrace: allocating 43519 entries in 170 pages [ 0.209494@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210308@0] CPU0: update cpu_capacity 1024 [ 0.214632@0] ASID allocator initialised with 32768 entries [ 0.252609@0] secmon: can't fine clear_range [ 0.253196@0] EFI services will not be available. [ 0.256039@0] Meson chip version = RevC (25:C - 43:0) [ 0.289969@1] Detected VIPT I-cache on CPU1 [ 0.290031@1] CPU1: update cpu_capacity 1024 [ 0.290034@1] CPU1: Booted secondary processor [410fd034] [ 0.318014@2] Detected VIPT I-cache on CPU2 [ 0.318068@2] CPU2: update cpu_capacity 1024 [ 0.318070@2] CPU2: Booted secondary processor [410fd034] [ 0.346086@3] Detected VIPT I-cache on CPU3 [ 0.346137@3] CPU3: update cpu_capacity 1024 [ 0.346139@3] CPU3: Booted secondary processor [410fd034] [ 0.346232@0] Brought up 4 CPUs [ 0.385455@0] SMP: Total of 4 processors activated. [ 0.390365@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396400@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407361@0] CPU: All CPU(s) started at EL2 [ 0.408140@0] alternatives: patching kernel code [ 0.413551@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420679@0] devtmpfs: initialized [ 0.436131@0] DMI not present or invalid. [ 0.436530@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444510@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451075@0] pinctrl core: initialized pinctrl subsystem [ 0.457652@0] NET: Registered protocol family 16 [ 0.485014@0] cpuidle: using governor menu [ 0.485168@0] register canvas platform driver [ 0.487882@0] register rdma platform driver [ 0.493333@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499702@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507191@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513304@0] clkmsr: clkmsr: driver init [ 0.517014@0] codec_mm_module_init [ 0.520453@0] media_configs_system_init [ 0.524582@0] aml_watch_point_probe, in, wp:2 [ 0.529250@0] pstore: using zlib compression [ 0.533518@0] console [pstore-1] enabled [ 0.536840@0] pstore: Registered ramoops as persistent store backend [ 0.543254@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557284@0] aml_iomap: amlogic iomap probe done [ 0.561946@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563881@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572834@0] audio_clocks: audio_clocks_probe done [ 0.581377@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581432@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586611@0] amlogic auge_snd_iomap probe done [ 0.866961@2] vgaarb: loaded [ 0.867368@2] SCSI subsystem initialized [ 0.868484@2] usbcore: registered new interface driver usbfs [ 0.873948@2] usbcore: registered new interface driver hub [ 0.879471@2] usbcore: registered new device driver usb [ 0.884746@2] Linux video capture interface: v2.00 [ 0.889500@2] pps_core: LinuxPPS API ver. 1 registered [ 0.894583@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.903971@2] PTP clock support registered [ 0.912287@2] dmi: Firmware registration failed. [ 0.913100@2] secmon: reserve_mem_size:0x300000 [ 0.917309@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.924216@2] secmon: get page:ffffffbf00140000, 5000 [ 0.928963@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.937354@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.944083@2] fb: osd_init_module [ 0.948569@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.954162@2] Bluetooth: Core ver 2.22 [ 0.957271@2] NET: Registered protocol family 31 [ 0.961871@2] Bluetooth: HCI device and connection manager initialized [ 0.968429@2] Bluetooth: HCI socket layer initialized [ 0.973490@2] Bluetooth: L2CAP socket layer initialized [ 0.978788@2] Bluetooth: SCO socket layer initialized [ 0.987864@2] NetLabel: Initializing [ 0.987897@2] NetLabel: domain hash size = 128 [ 0.991953@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.997176@2] NetLabel: unlabeled traffic allowed by default [ 1.004600@1] clocksource: Switched to clocksource arch_sys_counter [ 1.105125@1] VFS: Disk quotas dquot_6.6.0 [ 1.105233@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.124280@3] NET: Registered protocol family 2 [ 1.125049@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.130494@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.137162@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.143763@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.149716@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.156372@3] NET: Registered protocol family 1 [ 1.161196@3] RPC: Registered named UNIX socket transport module. [ 1.166858@3] RPC: Registered udp transport module. [ 1.171745@3] RPC: Registered tcp transport module. [ 1.176638@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.184801@3] Unpacking initramfs... [ 1.286231@3] Freeing initrd memory: 2308K [ 1.287659@3] hw perfevents: clusterb_enabled = 0 [ 1.289579@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.293940@3] hw perfevents: cluster A irq = 7 [ 1.298452@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.307848@3] audit: initializing netlink subsys (disabled) [ 1.311987@3] audit: type=2000 audit(1.120:1): initialized [ 1.318588@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.335619@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.341667@0] NFS: Registering the id_resolver key type [ 1.341732@0] Key type id_resolver registered [ 1.345656@0] Key type id_legacy registered [ 1.350192@0] fuse init (API version 7.26) [ 1.358660@0] NET: Registered protocol family 38 [ 1.358706@0] Key type asymmetric registered [ 1.362898@0] Asymmetric key parser 'x509' registered [ 1.368242@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.375592@0] io scheduler noop registered (default) [ 1.380557@0] io scheduler deadline registered [ 1.385302@0] io scheduler cfq registered [ 1.400154@0] Unable to detect cache hierarchy for CPU 0 [ 1.400333@0] random: fast init done [ 1.403702@0] random: crng init done [ 1.416218@2] loop: module loaded [ 1.421321@2] zram: Added device: zram0 [ 1.421795@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.427092@2] libphy: Fixed MDIO Bus: probed [ 1.431064@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.435729@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.443342@2] PPP generic driver version 2.4.2 [ 1.446845@2] PPP BSD Compression module registered [ 1.451472@2] PPP Deflate Compression module registered [ 1.456725@2] PPP MPPE Compression module registered [ 1.461692@2] NET: Registered protocol family 24 [ 1.466468@2] usbcore: registered new interface driver asix [ 1.472067@2] usbcore: registered new interface driver ax88179_178a [ 1.478329@2] usbcore: registered new interface driver cdc_ether [ 1.484346@2] usbcore: registered new interface driver net1080 [ 1.490215@2] usbcore: registered new interface driver cdc_subset [ 1.496341@2] usbcore: registered new interface driver zaurus [ 1.502142@2] usbcore: registered new interface driver cdc_ncm [ 1.508571@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.514648@2] ehci-pci: EHCI PCI platform driver [ 1.519384@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.525697@2] ohci-pci: OHCI PCI platform driver [ 1.530876@2] usbcore: registered new interface driver cdc_acm [ 1.536178@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.544485@2] usbcore: registered new interface driver usb-storage [ 1.550753@2] usbcore: registered new interface driver usbserial [ 1.557263@0] mousedev: PS/2 mouse device common for all mice [ 1.562823@0] usbcore: registered new interface driver xpad [ 1.568278@1] i2c /dev entries driver [ 1.571861@1] usbcore: registered new interface driver uvcvideo [ 1.577655@1] USB Video Class driver (1.1.1) [ 1.581925@1] md: linear personality registered for level -1 [ 1.588126@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.597765@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.603586@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.611334@3] usbcore: registered new interface driver usbhid [ 1.615290@3] usbhid: USB HID core driver [ 1.619553@0] ashmem: initialized [ 1.623021@3] logger: created 512K log 'log_main' [ 1.627573@0] logger: created 1K log 'log_events' [ 1.632247@3] logger: created 1K log 'log_radio' [ 1.636894@0] logger: created 16K log 'log_system' [ 1.641525@0] exFAT: Version 1.3.0 [ 1.646799@0] ff803000.serial: clock gate not found [ 1.649895@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.657052@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.672030@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.674615@0] console [ttyS0] enabled [ 1.674615@0] console [ttyS0] enabled [ 1.681825@0] bootconsole [aml_uart0] disabled [ 1.681825@0] bootconsole [aml_uart0] disabled [ 1.691332@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.697784@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.708063@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.717890@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.724393@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.736852@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.740854@3] irq = 20 [ 1.743195@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.752022@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.756434@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.761635@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.768147@3] meson-remote: Driver init [ 1.772089@3] meson-remote: remote_probe [ 1.775691@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.780759@3] meson-remote ff808040.rc: don't find the node [ 1.787309@3] meson-remote ff808040.rc: led_blink = 0 [ 1.792312@3] meson-remote ff808040.rc: don't find the node [ 1.799208@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.804852@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.810547@3] meson-remote ff808040.rc: custom_number = 3 [ 1.815872@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.821548@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.828709@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.835004@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.841152@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.846819@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.853977@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.860272@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.866417@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.872090@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.879248@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.885544@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.891673@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.898395@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.904173@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.909952@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.915644@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.921338@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.927288@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.933153@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.938759@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.944107@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.949454@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.955516@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.962442@0] meson-remote: IR XMP protocol handler initialized [ 1.968113@0] efusekeynum: 4 [ 1.970633@0] efusekeyname: mac offset: 0 size: 6 [ 1.976987@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.983361@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.989748@0] efusekeyname: usid offset: 18 size: 16 [ 1.996400@2] efuse efuse: probe OK! [ 2.002061@3] ge2d: ge2d_init_module [ 2.003709@3] [tsync_pcr_init]init success. [ 2.008264@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.014709@3] DI: di_module_init ok. [ 2.017874@3] dim:dim_module_init [ 2.021128@3] dim:dim_module_init finish [ 2.024767@3] dil:dil_init. [ 2.027708@3] dil:dil_init ok. [ 2.030607@3] vdin_drv_init: major 241 [ 2.034517@3] vdin_drv_init: vdin driver init done [ 2.039001@3] [viuin..]viuin_init_module viuin module init [ 2.044833@3] [viuin..]viuin_probe probe ok. [ 2.048910@3] amlvid:info: amlvideo_init called[ 2.052970@3] amlvid:info: amlvideo_create_instance called [ 2.058390@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.063914@3] amlvideo-000: V4L2 device registered as video10 [ 2.069196@3] amlvid:info: amlvideo_create_instance called [ 2.074606@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.079938@1] amlvideo-001: V4L2 device registered as video23 [ 2.085709@1] PPMGRDRV: warn: ppmgr module init func called [ 2.091919@1] videosync_create_instance dev_s ffffffc01d51f800,dev_s->dev ffffffc01dabde80 [ 2.099130@1] videosync_create_instance reg videosync.0 [ 2.104366@1] aml_vecm_init:module init [ 2.104367@3] videosync_thread started [ 2.112105@1] amdolby_vision_init:module init [ 2.116389@1] prime_sl module init [ 2.120024@1] amlogic mtd driver init [ 2.123708@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.128964@1] bl mode descrete [ 2.131866@1] fip_copies 4 [ 2.134554@1] fip_size 0x200000 [ 2.137654@1] nand_clk_ctrl 0xffe07000 [ 2.141361@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.146991@1] nand_clk_ctrl 0xffe07000 [ 2.150691@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.159018@1] plat->aml_nand_device ffffff800a778cf8 [ 2.163553@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.169517@1] NAND device id: c2 dc 90 a2 57 3 [ 2.173711@1] NAND device: Manufacturer ID: [ 2.177760@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.184418@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.189921@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.195440@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.201747@1] mtd->oobavail: 0x10 [ 2.205358@3] aml_nand_init 2119: plat-name:bootloader [ 2.210123@3] Creating 1 MTD partitions on "bootloader": [ 2.215369@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.222995@3] bootloader initialized ok [ 2.224623@3] plat->aml_nand_device ffffff800a778cf8 [ 2.229513@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.235562@3] NAND device id: c2 dc 90 a2 57 3 [ 2.239693@3] NAND device: Manufacturer ID: [ 2.243745@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.250400@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.255904@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.261425@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.267729@3] mtd->oobavail: 0x10 [ 2.271198@3] aml_nand_init 2119: plat-name:nandnormal [ 2.276124@3] bbt_start=20 [ 2.278756@3] env_start=24 [ 2.281429@3] key_start=32 [ 2.284095@3] dtb_start=40 [ 2.286776@3] ddr_start=44 [ 2.289465@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.295932@3] get_free_node 43: bitmap=0 [ 2.299371@3] get_free_node 55: bitmap=1 [ 2.303455@3] get_free_node 43: bitmap=1 [ 2.307133@3] get_free_node 55: bitmap=3 [ 2.311217@3] get_free_node 43: bitmap=3 [ 2.314895@3] get_free_node 55: bitmap=7 [ 2.318777@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.325416@3] nbbt free list: [ 2.328341@3] blockN=21, ec=-1, dirty_flag=0 [ 2.332582@3] blockN=22, ec=-1, dirty_flag=0 [ 2.336802@3] blockN=23, ec=-1, dirty_flag=0 [ 2.341029@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.346437@3] nbbt valid addr: 500000 [ 2.349655@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.355260@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.361502@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.367912@3] get_free_node 43: bitmap=7 [ 2.371389@3] get_free_node 55: bitmap=f [ 2.375473@3] get_free_node 43: bitmap=f [ 2.379152@3] get_free_node 55: bitmap=1f [ 2.383321@3] get_free_node 43: bitmap=1f [ 2.387086@3] get_free_node 55: bitmap=3f [ 2.391257@3] get_free_node 43: bitmap=3f [ 2.395021@3] get_free_node 55: bitmap=7f [ 2.399192@3] get_free_node 43: bitmap=7f [ 2.402956@3] get_free_node 55: bitmap=ff [ 2.407127@3] get_free_node 43: bitmap=ff [ 2.410891@3] get_free_node 55: bitmap=1ff [ 2.415147@3] get_free_node 43: bitmap=1ff [ 2.418999@3] get_free_node 55: bitmap=3ff [ 2.423051@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.429699@3] nenv free list: [ 2.432626@3] blockN=25, ec=-1, dirty_flag=0 [ 2.436852@3] blockN=26, ec=-1, dirty_flag=0 [ 2.441078@3] blockN=27, ec=-1, dirty_flag=0 [ 2.445304@3] blockN=28, ec=-1, dirty_flag=0 [ 2.449530@3] blockN=29, ec=-1, dirty_flag=0 [ 2.453756@3] blockN=30, ec=-1, dirty_flag=0 [ 2.457983@3] blockN=31, ec=-1, dirty_flag=0 [ 2.462209@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.473948@3] nenv valid addr: 610000 [ 2.473968@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.478395@3] get_free_node 43: bitmap=3ff [ 2.482246@3] get_free_node 55: bitmap=7ff [ 2.486525@3] get_free_node 43: bitmap=7ff [ 2.490354@3] get_free_node 55: bitmap=fff [ 2.494610@3] get_free_node 43: bitmap=fff [ 2.498461@3] get_free_node 55: bitmap=1fff [ 2.502803@3] get_free_node 43: bitmap=1fff [ 2.506741@3] get_free_node 55: bitmap=3fff [ 2.511083@3] get_free_node 43: bitmap=3fff [ 2.515021@3] get_free_node 55: bitmap=7fff [ 2.519374@3] get_free_node 43: bitmap=7fff [ 2.523301@3] get_free_node 55: bitmap=ffff [ 2.527643@3] get_free_node 43: bitmap=ffff [ 2.531581@3] get_free_node 55: bitmap=1ffff [ 2.536009@3] get_free_node 43: bitmap=1ffff [ 2.540033@3] get_free_node 55: bitmap=3ffff [ 2.544260@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.550900@3] nkey free list: [ 2.553832@3] blockN=32, ec=-1, dirty_flag=0 [ 2.558059@3] blockN=33, ec=-1, dirty_flag=0 [ 2.562285@3] blockN=34, ec=-1, dirty_flag=0 [ 2.566511@3] blockN=35, ec=-1, dirty_flag=0 [ 2.570737@3] blockN=36, ec=-1, dirty_flag=0 [ 2.574964@3] blockN=37, ec=-1, dirty_flag=0 [ 2.579190@3] blockN=38, ec=-1, dirty_flag=0 [ 2.583416@3] blockN=39, ec=-1, dirty_flag=0 [ 2.587642@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.592732@3] nkey valid addr: fffffffffffc0000 [ 2.597215@3] aml_nand_key_check 1251 NO key exist [ 2.601961@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.608586@3] get_free_node 43: bitmap=3ffff [ 2.612389@3] get_free_node 55: bitmap=7ffff [ 2.616827@3] get_free_node 43: bitmap=7ffff [ 2.620863@3] get_free_node 55: bitmap=fffff [ 2.625281@3] get_free_node 43: bitmap=fffff [ 2.629302@3] get_free_node 55: bitmap=1fffff [ 2.633618@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.640254@3] ndtb free list: [ 2.643188@3] blockN=41, ec=-1, dirty_flag=0 [ 2.647414@3] blockN=42, ec=-1, dirty_flag=0 [ 2.651640@3] blockN=43, ec=-1, dirty_flag=0 [ 2.655866@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.673859@3] ndtb valid addr: a00000 [ 2.673879@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.678314@3] get_free_node 43: bitmap=1fffff [ 2.682424@3] get_free_node 55: bitmap=3fffff [ 2.686941@3] get_free_node 43: bitmap=3fffff [ 2.691049@3] get_free_node 55: bitmap=7fffff [ 2.695361@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.702001@3] nddr free list: [ 2.704934@3] blockN=44, ec=-1, dirty_flag=0 [ 2.709160@3] blockN=45, ec=-1, dirty_flag=0 [ 2.713386@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.718475@3] nddr valid addr: fffffffffffc0000 [ 2.722961@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.727707@3] tpl: off 16777216, size 8388608 [ 2.793996@3] Creating 7 MTD partitions on "nandnormal": [ 2.794027@3] 0x000001000000-0x000001800000 : "tpl" [ 2.801082@2] 0x000001800000-0x000001a00000 : "misc" [ 2.804860@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.809756@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.816857@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.821560@2] 0x000003b00000-0x000015300000 : "system" [ 2.860469@2] 0x000015300000-0x000020000000 : "data" [ 2.883732@2] nandnormal initialized ok [ 2.883814@2] aml_ubootenv_init: register env chardev [ 2.887174@2] aml_ubootenv_init: register env chardev OK [ 2.892399@2] amlnf_dtb_init: register dtb cdev [ 2.896908@2] amlnf_dtb_init: register dtd cdev OK [ 2.901464@2] mtd_nand_probe 267 , err = 0 [ 2.906201@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.911787@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.918601@2] unifykey: storage in base: 0xffffffc005000000 [ 2.923539@2] unifykey: storage out base: 0xffffffc005040000 [ 2.929131@2] unifykey: storage block base: 0xffffffc005080000 [ 2.934903@2] unifykey: probe done! [ 2.938827@2] unifykey: no efuse-version set, use default value: -1 [ 2.944608@2] unifykey: key unify config unifykey-num is 6 [ 2.950041@2] unifykey: key unify fact unifykey-num is 6 [ 2.955266@2] unifykey: unifykey_devno: ee00000 [ 2.960026@2] unifykey: device unifykeys created ok [ 2.964664@2] unifykey: aml_unifykeys_init done! [ 2.969436@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.975832@2] amlkaraoke init success! [ 2.978932@2] sysled: module init [ 2.982311@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.987278@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.994406@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.000934@2] amlogic rfkill init [ 3.005606@2] dmc_monitor_probe [ 3.007333@2] page_trace_module_init, create sysfs failed [ 3.012998@2] defendkey defendkey: Reserved memory is not enough! [ 3.018515@2] defendkey: probe of defendkey failed with error -22 [ 3.025478@2] usbcore: registered new interface driver snd-usb-audio [ 3.034797@2] asoc debug: aml_audio_controller_probe-130 [ 3.036571@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.041903@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.049715@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.056876@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.063252@2] aml_tdm_platform_probe(), share en = 1[ 3.067989@2] No channel mask node Channel_Mask [ 3.072789@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.078303@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.086253@2] aml_tdm_platform_probe(), share en = 1[ 3.090768@2] No channel mask node Channel_Mask [ 3.095477@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.101070@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.109022@2] aml_tdm_platform_probe(), share en = 1[ 3.113531@2] No channel mask node Channel_Mask [ 3.119151@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.126185@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.134268@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.144196@2] Register vad [ 3.145356@2] check whether to update sound card init data [ 3.151161@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.158143@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.165452@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.171066@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.178734@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.186067@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.191937@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.198426@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.205494@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.211478@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.218355@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.224181@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.230924@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.238523@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.245721@1] snd_card_add_kcontrols card:ffffffc01ca0e018 [ 3.250811@1] effect_v2 is not init [ 3.254206@1] Failed to add VAD controls [ 3.258465@1] GACT probability NOT on [ 3.261735@1] Mirror/redirect action on [ 3.265511@1] u32 classifier [ 3.268337@1] Actions configured [ 3.271887@1] Netfilter messages via NETLINK v0.30. [ 3.276969@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.283166@1] ctnetlink v0.93: registering with nfnetlink. [ 3.288894@0] xt_time: kernel timezone is -0000 [ 3.292860@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.299082@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.304060@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.309647@0] Initializing XFRM netlink socket [ 3.314608@0] NET: Registered protocol family 10 [ 3.319816@0] mip6: Mobile IPv6 [ 3.321700@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.327496@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.334519@0] NET: Registered protocol family 17 [ 3.337836@0] NET: Registered protocol family 15 [ 3.342405@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.355504@0] Bluetooth: RFCOMM TTY layer initialized [ 3.360394@0] Bluetooth: RFCOMM socket layer initialized [ 3.365671@0] Bluetooth: RFCOMM ver 1.11 [ 3.369530@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.374950@0] Bluetooth: BNEP filters: protocol multicast [ 3.380308@0] Bluetooth: BNEP socket layer initialized [ 3.385388@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.391436@0] Bluetooth: HIDP socket layer initialized [ 3.396625@0] l2tp_core: L2TP core driver, V2.0 [ 3.401016@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.405916@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.411642@0] l2tp_netlink: L2TP netlink interface [ 3.416398@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.422427@0] l2tp_debugfs: L2TP debugfs support [ 3.426961@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.433565@0] NET: Registered protocol family 35 [ 3.438330@0] Key type dns_resolver registered [ 3.443493@0] Registered swp emulation handler [ 3.446911@0] Registered cp15_barrier emulation handler [ 3.452130@0] Registered setend emulation handler [ 3.456786@0] disable EAS feature [ 3.460839@2] registered taskstats version 1 [ 3.473652@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.979829@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.979889@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.988028@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.996491@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.003413@2] hub 1-0:1.0: USB hub found [ 4.006440@2] hub 1-0:1.0: 1 port detected [ 4.010761@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.016012@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.023831@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.032882@1] hub 2-0:1.0: USB hub found [ 4.035872@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.043193@1] usb usb2: Unsupported the hub [ 4.047650@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.055724@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.164520@1] dwc_otg: Core Release: 3.10a [ 4.164558@1] dwc_otg: Setting default values for core params [ 4.168726@1] dwc_otg: curmode: 0, host_only: 0 [ 4.185518@1] dwc_otg: Using Buffer DMA mode [ 4.185541@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.189419@1] dwc_otg: Working on port type = SLAVE [ 4.194251@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.201377@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.210636@0] gxbb_pm: enter meson_pm_probe! [ 4.210675@0] no vddio3v3_en pin[ 4.212309@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.217408@0] gxbb_pm: meson_pm_probe done [ 4.22173[ 4.228018@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.233443@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.441331@1] ubi0: attaching mtd6 [ 4.969600@1] ubi0: scanning is finished [ 4.973798@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.974084@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.981092@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.987979@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.995046@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.001259@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.008588@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.017819@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.027254@2] ubi0: background thread "ubi_bgt0d" started, PID 2004 [ 5.033014@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2007 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.077876@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.079802@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.089851@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.100593@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.106544@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.298198@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.358987@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.443196@3] ubi1: attaching mtd7 [ 5.769670@3] ubi1: scanning is finished [ 5.773466@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.773665@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.780676@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.787560@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.794627@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.800753@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.808081@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.817314@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.826636@3] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.835893@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.859637@1] UBIFS (ubi1:0): recovery needed [ 5.919403@1] UBIFS (ubi1:0): recovery completed [ 5.919556@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.925744@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.935742@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.946435@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.953225@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f2b78450 --- 0 OK [ 6.983414@0] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 6.995498@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.995537@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.002798@0] aml_tdm_open [ 7.003722@0] Not init audio effects Opened TCP tuning interface on port 15002: Waiting [ 7.012919@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.017303@3] cpufreq_interactive: no need to active hmp boost! for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.100764@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.104313@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B The[ 7.110438@0] asoc-aml-card auge_sound: tdm capture enable layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.159483@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 [ 8.649660@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.269238@3] asoc-aml-card auge_sound: tdm playback stop [ 13.269557@2] asoc-aml-card auge_sound: tdm capture stop [ 13.274362@2] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.265959@1] mtd_nand_reboot_notifier 35 [ 15.266223@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.274349@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.277909@1] usb usb2: USB disconnect, device number 1 [ 15.287512@2] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.288425@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.293707@2] usb usb1: USB disconnect, device number 1 [ 15.299594@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.320606@0] reboot: Restarting system [ 15.320718@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21798 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015880 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1973549 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016840@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106553@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129127@0] ftrace: allocating 43519 entries in 170 pages [ 0.209533@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214668@0] ASID allocator initialised with 32768 entries [ 0.252645@0] secmon: can't fine clear_range [ 0.253241@0] EFI services will not be available. [ 0.256074@0] Meson chip version = RevC (25:C - 43:0) [ 0.290004@1] Detected VIPT I-cache on CPU1 [ 0.290065@1] CPU1: update cpu_capacity 1024 [ 0.290067@1] CPU1: Booted secondary processor [410fd034] [ 0.318046@2] Detected VIPT I-cache on CPU2 [ 0.318099@2] CPU2: update cpu_capacity 1024 [ 0.318102@2] CPU2: Booted secondary processor [410fd034] [ 0.346119@3] Detected VIPT I-cache on CPU3 [ 0.346168@3] CPU3: update cpu_capacity 1024 [ 0.346171@3] CPU3: Booted secondary processor [410fd034] [ 0.346261@0] Brought up 4 CPUs [ 0.385481@0] SMP: Total of 4 processors activated. [ 0.390390@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396427@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407389@0] CPU: All CPU(s) started at EL2 [ 0.408165@0] alternatives: patching kernel code [ 0.413572@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420704@0] devtmpfs: initialized [ 0.436165@0] DMI not present or invalid. [ 0.436550@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444547@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451107@0] pinctrl core: initialized pinctrl subsystem [ 0.457671@0] NET: Registered protocol family 16 [ 0.477051@0] cpuidle: using governor menu [ 0.477197@0] register canvas platform driver [ 0.479924@0] register rdma platform driver [ 0.485379@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491745@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499235@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505336@0] clkmsr: clkmsr: driver init [ 0.509047@0] codec_mm_module_init [ 0.512488@0] media_configs_system_init [ 0.516624@0] aml_watch_point_probe, in, wp:2 [ 0.522168@0] pstore: using zlib compression [ 0.525551@0] console [pstore-1] enabled [ 0.528878@0] pstore: Registered ramoops as persistent store backend [ 0.535277@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549328@0] aml_iomap: amlogic iomap probe done [ 0.553996@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555927@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564868@0] audio_clocks: audio_clocks_probe done [ 0.573516@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573573@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578750@0] amlogic auge_snd_iomap probe done [ 0.857827@0] vgaarb: loaded [ 0.858228@0] SCSI subsystem initialized [ 0.859348@0] usbcore: registered new interface driver usbfs [ 0.864815@0] usbcore: registered new interface driver hub [ 0.870348@0] usbcore: registered new device driver usb [ 0.875628@0] Linux video capture interface: v2.00 [ 0.880384@0] pps_core: LinuxPPS API ver. 1 registered [ 0.885445@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894836@0] PTP clock support registered [ 0.903177@0] dmi: Firmware registration failed. [ 0.903944@0] secmon: reserve_mem_size:0x300000 [ 0.908190@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915117@0] secmon: get page:ffffffbf00140000, 5000 [ 0.919827@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928211@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.934956@0] fb: osd_init_module [ 0.939424@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.945036@0] Bluetooth: Core ver 2.22 [ 0.948135@0] NET: Registered protocol family 31 [ 0.952738@0] Bluetooth: HCI device and connection manager initialized [ 0.959288@0] Bluetooth: HCI socket layer initialized [ 0.964354@0] Bluetooth: L2CAP socket layer initialized [ 0.969671@0] Bluetooth: SCO socket layer initialized [ 0.975223@0] NetLabel: Initializing [ 0.978256@0] NetLabel: domain hash size = 128 [ 0.982902@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988054@0] NetLabel: unlabeled traffic allowed by default [ 0.995545@3] clocksource: Switched to clocksource arch_sys_counter [ 1.095935@3] VFS: Disk quotas dquot_6.6.0 [ 1.096041@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.114912@3] NET: Registered protocol family 2 [ 1.115704@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121119@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.127859@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134367@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140341@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147000@3] NET: Registered protocol family 1 [ 1.151837@3] RPC: Registered named UNIX socket transport module. [ 1.157487@3] RPC: Registered udp transport module. [ 1.162370@3] RPC: Registered tcp transport module. [ 1.167268@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175333@3] Unpacking initramfs... [ 1.277054@3] Freeing initrd memory: 2308K [ 1.278447@3] hw perfevents: clusterb_enabled = 0 [ 1.280307@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.284742@3] hw perfevents: cluster A irq = 7 [ 1.289297@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298660@3] audit: initializing netlink subsys (disabled) [ 1.302817@3] audit: type=2000 audit(1.068:1): initialized [ 1.309466@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330387@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332383@3] NFS: Registering the id_resolver key type [ 1.336078@3] Key type id_resolver registered [ 1.340400@3] Key type id_legacy registered [ 1.344892@3] fuse init (API version 7.26) [ 1.353463@3] NET: Registered protocol family 38 [ 1.353509@3] Key type asymmetric registered [ 1.357651@3] Asymmetric key parser 'x509' registered [ 1.363004@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370348@3] io scheduler noop registered (default) [ 1.375317@3] io scheduler deadline registered [ 1.380069@3] io scheduler cfq registered [ 1.394063@2] random: fast init done [ 1.394131@2] random: crng init done [ 1.394659@3] Unable to detect cache hierarchy for CPU 0 [ 1.426897@3] loop: module loaded [ 1.431912@3] zram: Added device: zram0 [ 1.432340@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.437559@3] libphy: Fixed MDIO Bus: probed [ 1.441605@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.446321@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.453886@3] PPP generic driver version 2.4.2 [ 1.457446@3] PPP BSD Compression module registered [ 1.462072@3] PPP Deflate Compression module registered [ 1.467320@3] PPP MPPE Compression module registered [ 1.472292@3] NET: Registered protocol family 24 [ 1.477063@3] usbcore: registered new interface driver asix [ 1.482649@3] usbcore: registered new interface driver ax88179_178a [ 1.488931@3] usbcore: registered new interface driver cdc_ether [ 1.494957@3] usbcore: registered new interface driver net1080 [ 1.500808@3] usbcore: registered new interface driver cdc_subset [ 1.506938@3] usbcore: registered new interface driver zaurus [ 1.512727@3] usbcore: registered new interface driver cdc_ncm [ 1.519185@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.525248@3] ehci-pci: EHCI PCI platform driver [ 1.529982@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.536295@3] ohci-pci: OHCI PCI platform driver [ 1.541487@3] usbcore: registered new interface driver cdc_acm [ 1.546771@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.555085@3] usbcore: registered new interface driver usb-storage [ 1.561341@3] usbcore: registered new interface driver usbserial [ 1.567879@3] mousedev: PS/2 mouse device common for all mice [ 1.573394@3] usbcore: registered new interface driver xpad [ 1.578838@3] i2c /dev entries driver [ 1.582447@3] usbcore: registered new interface driver uvcvideo [ 1.588238@3] USB Video Class driver (1.1.1) [ 1.592513@3] md: linear personality registered for level -1 [ 1.598703@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.608340@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.614196@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.621945@3] usbcore: registered new interface driver usbhid [ 1.625884@3] usbhid: USB HID core driver [ 1.630112@3] ashmem: initialized [ 1.633612@3] logger: created 512K log 'log_main' [ 1.638104@3] logger: created 1K log 'log_events' [ 1.642856@3] logger: created 1K log 'log_radio' [ 1.647487@3] logger: created 16K log 'log_system' [ 1.652118@3] exFAT: Version 1.3.0 [ 1.656857@2] ff803000.serial: clock gate not found [ 1.660502@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.667679@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.682626@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.685217@2] console [ttyS0] enabled [ 1.685217@2] console [ttyS0] enabled [ 1.692439@2] bootconsole [aml_uart0] disabled [ 1.692439@2] bootconsole [aml_uart0] disabled [ 1.701911@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.708382@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.718667@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.728477@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.734998@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.747366@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.751472@3] irq = 20 [ 1.753811@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.762618@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.767046@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.772282@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.778715@3] meson-remote: Driver init [ 1.782680@3] meson-remote: remote_probe [ 1.786310@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.791350@3] meson-remote ff808040.rc: don't find the node [ 1.797902@3] meson-remote ff808040.rc: led_blink = 0 [ 1.802904@3] meson-remote ff808040.rc: don't find the node [ 1.809805@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.815466@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.821147@3] meson-remote ff808040.rc: custom_number = 3 [ 1.826469@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.832145@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.839308@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.845600@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.851746@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.857415@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.864573@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.870869@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.877015@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.882686@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.889844@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.896140@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.902269@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.908992@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.914770@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.920548@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.926241@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.931934@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.937884@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.943750@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.949356@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.954703@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.960055@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.966061@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.973036@3] meson-remote: IR XMP protocol handler initialized [ 1.978698@3] efusekeynum: 4 [ 1.981231@3] efusekeyname: mac offset: 0 size: 6 [ 1.987578@3] efusekeyname: mac_bt offset: 6 size: 6 [ 1.993962@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.000339@3] efusekeyname: usid offset: 18 size: 16 [ 2.007001@1] efuse efuse: probe OK! [ 2.012609@3] ge2d: ge2d_init_module [ 2.014299@3] [tsync_pcr_init]init success. [ 2.018864@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.025312@3] DI: di_module_init ok. [ 2.028447@3] dim:dim_module_init [ 2.031756@3] dim:dim_module_init finish [ 2.035344@3] dil:dil_init. [ 2.038340@3] dil:dil_init ok. [ 2.041196@3] vdin_drv_init: major 241 [ 2.045109@3] vdin_drv_init: vdin driver init done [ 2.049604@3] [viuin..]viuin_init_module viuin module init [ 2.055410@3] [viuin..]viuin_probe probe ok. [ 2.059507@3] amlvid:info: amlvideo_init called[ 2.063570@3] amlvid:info: amlvideo_create_instance called [ 2.068987@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.074353@1] amlvideo-000: V4L2 device registered as video10 [ 2.079812@1] amlvid:info: amlvideo_create_instance called [ 2.085216@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.090519@0] amlvideo-001: V4L2 device registered as video23 [ 2.096283@0] PPMGRDRV: warn: ppmgr module init func called [ 2.102456@2] videosync_create_instance dev_s ffffffc01c980c00,dev_s->dev ffffffc01d984280 [ 2.109719@2] videosync_create_instance reg videosync.0 [ 2.114969@2] aml_vecm_init:module init [ 2.114970@0] videosync_thread started [ 2.122703@2] amdolby_vision_init:module init [ 2.126971@2] prime_sl module init [ 2.130605@2] amlogic mtd driver init [ 2.134316@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.139560@2] bl mode descrete [ 2.142463@2] fip_copies 4 [ 2.145149@2] fip_size 0x200000 [ 2.148248@2] nand_clk_ctrl 0xffe07000 [ 2.151960@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.157588@2] nand_clk_ctrl 0xffe07000 [ 2.161290@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.169614@2] plat->aml_nand_device ffffff800a778cf8 [ 2.174134@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.180120@2] NAND device id: c2 dc 90 a2 57 3 [ 2.184308@2] NAND device: Manufacturer ID: [ 2.188356@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.195015@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.200515@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.206036@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.212338@2] mtd->oobavail: 0x10 [ 2.216016@3] aml_nand_init 2119: plat-name:bootloader [ 2.220720@3] Creating 1 MTD partitions on "bootloader": [ 2.225965@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.233520@0] bootloader initialized ok [ 2.235189@0] plat->aml_nand_device ffffff800a778cf8 [ 2.240128@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.246155@0] NAND device id: c2 dc 90 a2 57 3 [ 2.250290@0] NAND device: Manufacturer ID: [ 2.254337@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.260995@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.266500@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.272018@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.278320@0] mtd->oobavail: 0x10 [ 2.281799@0] aml_nand_init 2119: plat-name:nandnormal [ 2.286708@0] bbt_start=20 [ 2.289353@0] env_start=24 [ 2.292026@0] key_start=32 [ 2.294691@0] dtb_start=40 [ 2.297373@0] ddr_start=44 [ 2.300049@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.306529@0] get_free_node 43: bitmap=0 [ 2.309967@0] get_free_node 55: bitmap=1 [ 2.314051@0] get_free_node 43: bitmap=1 [ 2.317729@0] get_free_node 55: bitmap=3 [ 2.321813@0] get_free_node 43: bitmap=3 [ 2.325491@0] get_free_node 55: bitmap=7 [ 2.329373@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.336013@0] nbbt free list: [ 2.338938@0] blockN=21, ec=-1, dirty_flag=0 [ 2.343172@0] blockN=22, ec=-1, dirty_flag=0 [ 2.347403@0] blockN=23, ec=-1, dirty_flag=0 [ 2.351625@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.357033@0] nbbt valid addr: 500000 [ 2.360251@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.365857@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.372099@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.378509@0] get_free_node 43: bitmap=7 [ 2.381985@0] get_free_node 55: bitmap=f [ 2.386070@0] get_free_node 43: bitmap=f [ 2.389748@0] get_free_node 55: bitmap=1f [ 2.393919@0] get_free_node 43: bitmap=1f [ 2.397683@0] get_free_node 55: bitmap=3f [ 2.401853@0] get_free_node 43: bitmap=3f [ 2.405618@0] get_free_node 55: bitmap=7f [ 2.409788@0] get_free_node 43: bitmap=7f [ 2.413552@0] get_free_node 55: bitmap=ff [ 2.417723@0] get_free_node 43: bitmap=ff [ 2.421488@0] get_free_node 55: bitmap=1ff [ 2.425744@0] get_free_node 43: bitmap=1ff [ 2.429595@0] get_free_node 55: bitmap=3ff [ 2.433648@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.440289@0] nenv free list: [ 2.443214@0] blockN=25, ec=-1, dirty_flag=0 [ 2.447448@0] blockN=26, ec=-1, dirty_flag=0 [ 2.451674@0] blockN=27, ec=-1, dirty_flag=0 [ 2.455900@0] blockN=28, ec=-1, dirty_flag=0 [ 2.460127@0] blockN=29, ec=-1, dirty_flag=0 [ 2.464353@0] blockN=30, ec=-1, dirty_flag=0 [ 2.468579@0] blockN=31, ec=-1, dirty_flag=0 [ 2.472806@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.484562@0] nenv valid addr: 610000 [ 2.484582@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.489018@0] get_free_node 43: bitmap=3ff [ 2.492868@0] get_free_node 55: bitmap=7ff [ 2.497125@0] get_free_node 43: bitmap=7ff [ 2.500976@0] get_free_node 55: bitmap=fff [ 2.505232@0] get_free_node 43: bitmap=fff [ 2.509083@0] get_free_node 55: bitmap=1fff [ 2.513426@0] get_free_node 43: bitmap=1fff [ 2.517363@0] get_free_node 55: bitmap=3fff [ 2.521711@0] get_free_node 43: bitmap=3fff [ 2.525644@0] get_free_node 55: bitmap=7fff [ 2.529986@0] get_free_node 43: bitmap=7fff [ 2.533923@0] get_free_node 55: bitmap=ffff [ 2.538266@0] get_free_node 43: bitmap=ffff [ 2.542203@0] get_free_node 55: bitmap=1ffff [ 2.546632@0] get_free_node 43: bitmap=1ffff [ 2.550656@0] get_free_node 55: bitmap=3ffff [ 2.554882@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.561522@0] nkey free list: [ 2.564455@0] blockN=32, ec=-1, dirty_flag=0 [ 2.568681@0] blockN=33, ec=-1, dirty_flag=0 [ 2.572907@0] blockN=34, ec=-1, dirty_flag=0 [ 2.577133@0] blockN=35, ec=-1, dirty_flag=0 [ 2.581360@0] blockN=36, ec=-1, dirty_flag=0 [ 2.585586@0] blockN=37, ec=-1, dirty_flag=0 [ 2.589812@0] blockN=38, ec=-1, dirty_flag=0 [ 2.594038@0] blockN=39, ec=-1, dirty_flag=0 [ 2.598265@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.603353@0] nkey valid addr: fffffffffffc0000 [ 2.607839@0] aml_nand_key_check 1251 NO key exist [ 2.612583@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.619197@0] get_free_node 43: bitmap=3ffff [ 2.623020@0] get_free_node 55: bitmap=7ffff [ 2.627449@0] get_free_node 43: bitmap=7ffff [ 2.631472@0] get_free_node 55: bitmap=fffff [ 2.635981@0] get_free_node 43: bitmap=fffff [ 2.639928@0] get_free_node 55: bitmap=1fffff [ 2.644237@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.650877@0] ndtb free list: [ 2.653810@0] blockN=41, ec=-1, dirty_flag=0 [ 2.658036@0] blockN=42, ec=-1, dirty_flag=0 [ 2.662262@0] blockN=43, ec=-1, dirty_flag=0 [ 2.666489@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.684483@0] ndtb valid addr: a00000 [ 2.684502@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.688937@0] get_free_node 43: bitmap=1fffff [ 2.693046@0] get_free_node 55: bitmap=3fffff [ 2.697561@0] get_free_node 43: bitmap=3fffff [ 2.701670@0] get_free_node 55: bitmap=7fffff [ 2.705983@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.712623@0] nddr free list: [ 2.715556@0] blockN=44, ec=-1, dirty_flag=0 [ 2.719782@0] blockN=45, ec=-1, dirty_flag=0 [ 2.724009@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.729097@0] nddr valid addr: fffffffffffc0000 [ 2.733583@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.738329@0] tpl: off 16777216, size 8388608 [ 2.804642@0] Creating 7 MTD partitions on "nandnormal": [ 2.804671@0] 0x000001000000-0x000001800000 : "tpl" [ 2.811686@1] 0x000001800000-0x000001a00000 : "misc" [ 2.815458@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.820441@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.827440@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.836292@2] 0x000003b00000-0x000015300000 : "system" [ 2.873234@2] 0x000015300000-0x000020000000 : "data" [ 2.896505@2] nandnormal initialized ok [ 2.896585@2] aml_ubootenv_init: register env chardev [ 2.899958@2] aml_ubootenv_init: register env chardev OK [ 2.905176@2] amlnf_dtb_init: register dtb cdev [ 2.909697@2] amlnf_dtb_init: register dtd cdev OK [ 2.914244@2] mtd_nand_probe 267 , err = 0 [ 2.918956@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.924566@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.931380@2] unifykey: storage in base: 0xffffffc005000000 [ 2.936320@2] unifykey: storage out base: 0xffffffc005040000 [ 2.941911@2] unifykey: storage block base: 0xffffffc005080000 [ 2.947680@2] unifykey: probe done! [ 2.951594@2] unifykey: no efuse-version set, use default value: -1 [ 2.957346@2] unifykey: key unify config unifykey-num is 6 [ 2.962819@2] unifykey: key unify fact unifykey-num is 6 [ 2.968039@2] unifykey: unifykey_devno: ee00000 [ 2.972813@2] unifykey: device unifykeys created ok [ 2.977439@2] unifykey: aml_unifykeys_init done! [ 2.982209@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.988571@2] amlkaraoke init success! [ 2.991708@2] sysled: module init [ 2.995082@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.000059@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.007162@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.013713@2] amlogic rfkill init [ 3.018377@2] dmc_monitor_probe [ 3.020162@2] page_trace_module_init, create sysfs failed [ 3.029776@2] defendkey defendkey: Reserved memory is not enough! [ 3.031268@2] defendkey: probe of defendkey failed with error -22 [ 3.038271@2] usbcore: registered new interface driver snd-usb-audio [ 3.047450@2] asoc debug: aml_audio_controller_probe-130 [ 3.049465@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.054692@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.062484@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.069654@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.076029@2] aml_tdm_platform_probe(), share en = 1[ 3.080767@2] No channel mask node Channel_Mask [ 3.085555@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.091078@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.099028@2] aml_tdm_platform_probe(), share en = 1[ 3.103540@2] No channel mask node Channel_Mask [ 3.108280@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.113853@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.121781@2] aml_tdm_platform_probe(), share en = 1[ 3.126309@2] No channel mask node Channel_Mask [ 3.131963@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.138958@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.147038@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.156976@2] Register vad [ 3.158095@2] check whether to update sound card init data [ 3.163941@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.170913@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.178236@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.183842@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.191517@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.198845@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.204719@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.211202@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.218319@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.224258@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.231109@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.236959@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.243692@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.251246@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.258499@3] snd_card_add_kcontrols card:ffffffc01ca48018 [ 3.263557@3] effect_v2 is not init [ 3.266976@3] Failed to add VAD controls [ 3.271233@3] GACT probability NOT on [ 3.274552@3] Mirror/redirect action on [ 3.278292@3] u32 classifier [ 3.281124@3] Actions configured [ 3.284669@3] Netfilter messages via NETLINK v0.30. [ 3.289754@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.295940@3] ctnetlink v0.93: registering with nfnetlink. [ 3.301672@1] xt_time: kernel timezone is -0000 [ 3.305653@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.311870@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.316851@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.322419@1] Initializing XFRM netlink socket [ 3.327414@1] NET: Registered protocol family 10 [ 3.332631@1] mip6: Mobile IPv6 [ 3.334450@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.340284@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.347289@1] NET: Registered protocol family 17 [ 3.350615@1] NET: Registered protocol family 15 [ 3.355178@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.368298@1] Bluetooth: RFCOMM TTY layer initialized [ 3.373171@1] Bluetooth: RFCOMM socket layer initialized [ 3.378450@1] Bluetooth: RFCOMM ver 1.11 [ 3.382306@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.387733@1] Bluetooth: BNEP filters: protocol multicast [ 3.393084@1] Bluetooth: BNEP socket layer initialized [ 3.398169@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.404208@1] Bluetooth: HIDP socket layer initialized [ 3.409382@1] l2tp_core: L2TP core driver, V2.0 [ 3.413800@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.418695@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.424421@1] l2tp_netlink: L2TP netlink interface [ 3.429178@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.435199@1] l2tp_debugfs: L2TP debugfs support [ 3.439738@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.446343@1] NET: Registered protocol family 35 [ 3.451112@1] Key type dns_resolver registered [ 3.456291@1] Registered swp emulation handler [ 3.459682@1] Registered cp15_barrier emulation handler [ 3.464846@1] Registered setend emulation handler [ 3.469561@1] disable EAS feature [ 3.473651@1] registered taskstats version 1 [ 3.486423@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.992682@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.992801@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.000963@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.009359@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.016242@2] hub 1-0:1.0: USB hub found [ 4.019229@2] hub 1-0:1.0: 1 port detected [ 4.023654@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.028867@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.036690@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.045627@0] hub 2-0:1.0: USB hub found [ 4.048752@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.056039@0] usb usb2: Unsupported the hub [ 4.060493@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.068583@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.177156@2] dwc_otg: Core Release: 3.10a [ 4.177194@2] dwc_otg: Setting default values for core params [ 4.181350@2] dwc_otg: curmode: 0, host_only: 0 [ 4.198140@2] dwc_otg: Using Buffer DMA mode [ 4.198163@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.202042@2] dwc_otg: Working on port type = SLAVE [ 4.206874@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.213936@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.223145@0] gxbb_pm: enter meson_pm_probe! [ 4.223183@0] no vddio3v3_en pin[ 4.224858@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.229893@0] gxbb_pm: meson_pm_probe done [ 4.23424­š—™š˜ML&(¦j•Í½¹}Õ…ÉÑ™™áÁÍÁÁÁ¹Í•É¥…±éÑÑåMÁÕÍ•áÑ…±¡á5¥ÉÑÁÁÁÁÁÁ¡…¹•ÅÅÕÉÁÁѽÅÅÕÉÁÁ5)mѹÉÑÕåÉåÁuÉ••¥¹Õ¹ÕÍ•‘­•É¹•±µ•µ½ÉåéÕÁÕÙ-5)ÿ/dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.454563@3] ubi0: attaching mtd6 [ 4.983136@3] ubi0: scanning is finished [ 4.987301@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.987612@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.994578@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.001477@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.008554@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.014759@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.022094@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.031319@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.040785@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.046313@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.091093@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.093052@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.103036@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.113809@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.119764@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301002@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.361552@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.445298@2] ubi1: attaching mtd7 [ 5.771807@2] ubi1: scanning is finished [ 5.775654@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.775800@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.782801@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.789696@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.796762@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.802898@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810217@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.819449@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.828769@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.837920@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.861763@0] UBIFS (ubi1:0): recovery needed [ 5.923288@2] UBIFS (ubi1:0): recovery completed [ 5.923444@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.929633@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.939629@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.950321@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.957051@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2c8b450 --- 0 OK [ 6.983356@3] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 6.994777@3] asoc-aml-card auge_sound: tdm prepare capture [ 6.994816@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.002268@3] aml_tdm_open [ 7.003000@3] Not init audio effects Opened TCP tuning inte[ 7.010788@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.014203@0] cpufreq_interactive: no need to active hmp boost! rface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.100727@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.104425@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.110343@1] asoc-aml-card auge_sound: tdm capture enable he layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.159394@1] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.691679@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22019 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015882 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975029 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129130@0] ftrace: allocating 43519 entries in 170 pages [ 0.209494@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210308@0] CPU0: update cpu_capacity 1024 [ 0.214632@0] ASID allocator initialised with 32768 entries [ 0.252613@0] secmon: can't fine clear_range [ 0.253212@0] EFI services will not be available. [ 0.256042@0] Meson chip version = RevC (25:C - 43:0) [ 0.289964@1] Detected VIPT I-cache on CPU1 [ 0.290026@1] CPU1: update cpu_capacity 1024 [ 0.290028@1] CPU1: Booted secondary processor [410fd034] [ 0.318018@2] Detected VIPT I-cache on CPU2 [ 0.318071@2] CPU2: update cpu_capacity 1024 [ 0.318073@2] CPU2: Booted secondary processor [410fd034] [ 0.346095@3] Detected VIPT I-cache on CPU3 [ 0.346144@3] CPU3: update cpu_capacity 1024 [ 0.346147@3] CPU3: Booted secondary processor [410fd034] [ 0.346237@0] Brought up 4 CPUs [ 0.385455@0] SMP: Total of 4 processors activated. [ 0.390364@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396400@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407358@0] CPU: All CPU(s) started at EL2 [ 0.408139@0] alternatives: patching kernel code [ 0.413541@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420679@0] devtmpfs: initialized [ 0.436123@0] DMI not present or invalid. [ 0.436507@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444503@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451055@0] pinctrl core: initialized pinctrl subsystem [ 0.457615@0] NET: Registered protocol family 16 [ 0.476992@0] cpuidle: using governor menu [ 0.477142@0] register canvas platform driver [ 0.479859@0] register rdma platform driver [ 0.485316@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491680@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499166@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505279@0] clkmsr: clkmsr: driver init [ 0.508997@0] codec_mm_module_init [ 0.512430@0] media_configs_system_init [ 0.516563@0] aml_watch_point_probe, in, wp:2 [ 0.521208@0] pstore: using zlib compression [ 0.525484@0] console [pstore-1] enabled [ 0.528816@0] pstore: Registered ramoops as persistent store backend [ 0.535230@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549261@0] aml_iomap: amlogic iomap probe done [ 0.553887@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555856@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564799@0] audio_clocks: audio_clocks_probe done [ 0.573354@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573412@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578591@0] amlogic auge_snd_iomap probe done [ 0.850313@0] vgaarb: loaded [ 0.850707@0] SCSI subsystem initialized [ 0.851836@0] usbcore: registered new interface driver usbfs [ 0.857325@0] usbcore: registered new interface driver hub [ 0.862825@0] usbcore: registered new device driver usb [ 0.868106@0] Linux video capture interface: v2.00 [ 0.872844@0] pps_core: LinuxPPS API ver. 1 registered [ 0.877945@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.887321@0] PTP clock support registered [ 0.891820@0] dmi: Firmware registration failed. [ 0.896500@0] secmon: reserve_mem_size:0x300000 [ 0.900663@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.907543@0] secmon: get page:ffffffbf00140000, 5000 [ 0.912304@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.920699@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.927434@0] fb: osd_init_module [ 0.931898@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.937530@0] Bluetooth: Core ver 2.22 [ 0.940621@0] NET: Registered protocol family 31 [ 0.945229@0] Bluetooth: HCI device and connection manager initialized [ 0.951783@0] Bluetooth: HCI socket layer initialized [ 0.956838@0] Bluetooth: L2CAP socket layer initialized [ 0.962161@0] Bluetooth: SCO socket layer initialized [ 0.971224@0] NetLabel: Initializing [ 0.971256@0] NetLabel: domain hash size = 128 [ 0.975302@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.980526@0] NetLabel: unlabeled traffic allowed by default [ 0.987958@3] clocksource: Switched to clocksource arch_sys_counter [ 1.088538@3] VFS: Disk quotas dquot_6.6.0 [ 1.088646@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.107577@1] NET: Registered protocol family 2 [ 1.108358@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.113803@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.120474@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.127186@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.133023@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.139735@2] NET: Registered protocol family 1 [ 1.144555@2] RPC: Registered named UNIX socket transport module. [ 1.150181@2] RPC: Registered udp transport module. [ 1.155053@2] RPC: Registered tcp transport module. [ 1.159967@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.168102@2] Unpacking initramfs... [ 1.269542@2] Freeing initrd memory: 2308K [ 1.270965@2] hw perfevents: clusterb_enabled = 0 [ 1.272894@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.277255@2] hw perfevents: cluster A irq = 7 [ 1.281766@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.291123@2] audit: initializing netlink subsys (disabled) [ 1.295300@2] audit: type=2000 audit(1.064:1): initialized [ 1.301929@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.322923@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.324944@2] NFS: Registering the id_resolver key type [ 1.328607@2] Key type id_resolver registered [ 1.332934@2] Key type id_legacy registered [ 1.337441@2] fuse init (API version 7.26) [ 1.345985@2] NET: Registered protocol family 38 [ 1.346029@2] Key type asymmetric registered [ 1.350195@2] Asymmetric key parser 'x509' registered [ 1.355535@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.362912@2] io scheduler noop registered (default) [ 1.367848@2] io scheduler deadline registered [ 1.372569@2] io scheduler cfq registered [ 1.386905@3] random: fast init done [ 1.386973@3] random: crng init done [ 1.387514@2] Unable to detect cache hierarchy for CPU 0 [ 1.421566@2] loop: module loaded [ 1.422499@2] zram: Added device: zram0 [ 1.423446@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.430948@2] libphy: Fixed MDIO Bus: probed [ 1.434496@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.439303@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.446873@2] PPP generic driver version 2.4.2 [ 1.450423@2] PPP BSD Compression module registered [ 1.455043@2] PPP Deflate Compression module registered [ 1.460295@2] PPP MPPE Compression module registered [ 1.465268@2] NET: Registered protocol family 24 [ 1.470055@2] usbcore: registered new interface driver asix [ 1.475621@2] usbcore: registered new interface driver ax88179_178a [ 1.481896@2] usbcore: registered new interface driver cdc_ether [ 1.487915@2] usbcore: registered new interface driver net1080 [ 1.493785@2] usbcore: registered new interface driver cdc_subset [ 1.499916@2] usbcore: registered new interface driver zaurus [ 1.505708@2] usbcore: registered new interface driver cdc_ncm [ 1.512178@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.518212@2] ehci-pci: EHCI PCI platform driver [ 1.522968@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.529296@2] ohci-pci: OHCI PCI platform driver [ 1.534457@2] usbcore: registered new interface driver cdc_acm [ 1.539742@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.548065@2] usbcore: registered new interface driver usb-storage [ 1.554326@2] usbcore: registered new interface driver usbserial [ 1.560789@0] mousedev: PS/2 mouse device common for all mice [ 1.566394@0] usbcore: registered new interface driver xpad [ 1.571835@2] i2c /dev entries driver [ 1.575428@2] usbcore: registered new interface driver uvcvideo [ 1.581242@2] USB Video Class driver (1.1.1) [ 1.585492@2] md: linear personality registered for level -1 [ 1.591682@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.601299@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.607220@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.614909@1] usbcore: registered new interface driver usbhid [ 1.618846@1] usbhid: USB HID core driver [ 1.623101@0] ashmem: initialized [ 1.626577@1] logger: created 512K log 'log_main' [ 1.631110@0] logger: created 1K log 'log_events' [ 1.635819@1] logger: created 1K log 'log_radio' [ 1.640519@0] logger: created 16K log 'log_system' [ 1.645106@0] exFAT: Version 1.3.0 [ 1.649772@0] ff803000.serial: clock gate not found [ 1.653470@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.660631@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.675599@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.678187@0] console [ttyS0] enabled [ 1.678187@0] console [ttyS0] enabled [ 1.685397@0] bootconsole [aml_uart0] disabled [ 1.685397@0] bootconsole [aml_uart0] disabled [ 1.694883@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.701353@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.711694@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.721438@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.727983@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.740435@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.744452@0] irq = 20 [ 1.746768@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.755609@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.760061@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.765229@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.771689@0] meson-remote: Driver init [ 1.775654@0] meson-remote: remote_probe [ 1.779259@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.784328@0] meson-remote ff808040.rc: don't find the node [ 1.790874@0] meson-remote ff808040.rc: led_blink = 0 [ 1.795877@0] meson-remote ff808040.rc: don't find the node [ 1.802782@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.808419@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.814122@0] meson-remote ff808040.rc: custom_number = 3 [ 1.819437@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.825122@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.832276@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.838578@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.844721@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.850389@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.857547@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.863842@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.869988@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.875659@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.882818@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.889114@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.895242@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.901965@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.907743@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.913521@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.919214@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.924907@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.930858@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.936723@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.942329@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.947677@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.953024@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.959120@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.966029@0] meson-remote: IR XMP protocol handler initialized [ 1.971677@0] efusekeynum: 4 [ 1.974201@0] efusekeyname: mac offset: 0 size: 6 [ 1.980552@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.986939@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.993313@0] efusekeyname: usid offset: 18 size: 16 [ 1.999988@1] efuse efuse: probe OK! [ 2.005501@1] ge2d: ge2d_init_module [ 2.007282@1] [tsync_pcr_init]init success. [ 2.011833@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.018297@1] DI: di_module_init ok. [ 2.021407@1] dim:dim_module_init [ 2.024711@1] dim:dim_module_init finish [ 2.028343@1] dil:dil_init. [ 2.031281@1] dil:dil_init ok. [ 2.034182@1] vdin_drv_init: major 241 [ 2.038093@1] vdin_drv_init: vdin driver init done [ 2.042575@1] [viuin..]viuin_init_module viuin module init [ 2.048393@1] [viuin..]viuin_probe probe ok. [ 2.052488@1] amlvid:info: amlvideo_init called[ 2.056548@1] amlvid:info: amlvideo_create_instance called [ 2.061960@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.067329@0] amlvideo-000: V4L2 device registered as video10 [ 2.072772@0] amlvid:info: amlvideo_create_instance called [ 2.078175@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.083497@2] amlvideo-001: V4L2 device registered as video23 [ 2.089264@2] PPMGRDRV: warn: ppmgr module init func called [ 2.095492@3] videosync_create_instance dev_s ffffffc01c904c00,dev_s->dev ffffffc01d488400 [ 2.102702@3] videosync_create_instance reg videosync.0 [ 2.107971@3] aml_vecm_init:module init [ 2.107972@0] videosync_thread started [ 2.115680@3] amdolby_vision_init:module init [ 2.119964@3] prime_sl module init [ 2.123569@3] amlogic mtd driver init [ 2.127286@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.132520@3] bl mode descrete [ 2.135435@3] fip_copies 4 [ 2.138121@3] fip_size 0x200000 [ 2.141223@3] nand_clk_ctrl 0xffe07000 [ 2.144930@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.150561@3] nand_clk_ctrl 0xffe07000 [ 2.154260@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.162582@3] plat->aml_nand_device ffffff800a778cf8 [ 2.167127@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.173087@3] NAND device id: c2 dc 90 a2 57 3 [ 2.177286@3] NAND device: Manufacturer ID: [ 2.181330@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.187995@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.193490@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.199011@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.205312@3] mtd->oobavail: 0x10 [ 2.208876@2] aml_nand_init 2119: plat-name:bootloader [ 2.213691@2] Creating 1 MTD partitions on "bootloader": [ 2.218940@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.226428@3] bootloader initialized ok [ 2.228193@3] plat->aml_nand_device ffffff800a778cf8 [ 2.233083@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.239123@3] NAND device id: c2 dc 90 a2 57 3 [ 2.243262@3] NAND device: Manufacturer ID: [ 2.247323@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.253978@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.259470@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.264997@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.271296@3] mtd->oobavail: 0x10 [ 2.275024@3] aml_nand_init 2119: plat-name:nandnormal [ 2.279697@3] bbt_start=20 [ 2.282328@3] env_start=24 [ 2.284999@3] key_start=32 [ 2.287665@3] dtb_start=40 [ 2.290346@3] ddr_start=44 [ 2.293022@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.299502@3] get_free_node 43: bitmap=0 [ 2.302941@3] get_free_node 55: bitmap=1 [ 2.307024@3] get_free_node 43: bitmap=1 [ 2.310703@3] get_free_node 55: bitmap=3 [ 2.314787@3] get_free_node 43: bitmap=3 [ 2.318465@3] get_free_node 55: bitmap=7 [ 2.322346@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.328987@3] nbbt free list: [ 2.331911@3] blockN=21, ec=-1, dirty_flag=0 [ 2.336145@3] blockN=22, ec=-1, dirty_flag=0 [ 2.340372@3] blockN=23, ec=-1, dirty_flag=0 [ 2.344608@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.350006@3] nbbt valid addr: 500000 [ 2.353225@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.358831@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.365072@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.371481@3] get_free_node 43: bitmap=7 [ 2.374959@3] get_free_node 55: bitmap=f [ 2.379043@3] get_free_node 43: bitmap=f [ 2.382721@3] get_free_node 55: bitmap=1f [ 2.386892@3] get_free_node 43: bitmap=1f [ 2.390656@3] get_free_node 55: bitmap=3f [ 2.394826@3] get_free_node 43: bitmap=3f [ 2.398591@3] get_free_node 55: bitmap=7f [ 2.402761@3] get_free_node 43: bitmap=7f [ 2.406526@3] get_free_node 55: bitmap=ff [ 2.410696@3] get_free_node 43: bitmap=ff [ 2.414461@3] get_free_node 55: bitmap=1ff [ 2.418717@3] get_free_node 43: bitmap=1ff [ 2.422568@3] get_free_node 55: bitmap=3ff [ 2.426621@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.433262@3] nenv free list: [ 2.436195@3] blockN=25, ec=-1, dirty_flag=0 [ 2.440421@3] blockN=26, ec=-1, dirty_flag=0 [ 2.444648@3] blockN=27, ec=-1, dirty_flag=0 [ 2.448874@3] blockN=28, ec=-1, dirty_flag=0 [ 2.453100@3] blockN=29, ec=-1, dirty_flag=0 [ 2.457326@3] blockN=30, ec=-1, dirty_flag=0 [ 2.461553@3] blockN=31, ec=-1, dirty_flag=0 [ 2.465779@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.477530@3] nenv valid addr: 610000 [ 2.477550@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.481982@3] get_free_node 43: bitmap=3ff [ 2.485833@3] get_free_node 55: bitmap=7ff [ 2.490089@3] get_free_node 43: bitmap=7ff [ 2.493940@3] get_free_node 55: bitmap=fff [ 2.498197@3] get_free_node 43: bitmap=fff [ 2.502048@3] get_free_node 55: bitmap=1fff [ 2.506390@3] get_free_node 43: bitmap=1fff [ 2.510328@3] get_free_node 55: bitmap=3fff [ 2.514671@3] get_free_node 43: bitmap=3fff [ 2.518608@3] get_free_node 55: bitmap=7fff [ 2.522951@3] get_free_node 43: bitmap=7fff [ 2.526888@3] get_free_node 55: bitmap=ffff [ 2.531231@3] get_free_node 43: bitmap=ffff [ 2.535168@3] get_free_node 55: bitmap=1ffff [ 2.539597@3] get_free_node 43: bitmap=1ffff [ 2.543621@3] get_free_node 55: bitmap=3ffff [ 2.547847@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.554487@3] nkey free list: [ 2.557419@3] blockN=32, ec=-1, dirty_flag=0 [ 2.561646@3] blockN=33, ec=-1, dirty_flag=0 [ 2.565872@3] blockN=34, ec=-1, dirty_flag=0 [ 2.570098@3] blockN=35, ec=-1, dirty_flag=0 [ 2.574324@3] blockN=36, ec=-1, dirty_flag=0 [ 2.578551@3] blockN=37, ec=-1, dirty_flag=0 [ 2.582777@3] blockN=38, ec=-1, dirty_flag=0 [ 2.587003@3] blockN=39, ec=-1, dirty_flag=0 [ 2.591230@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.596318@3] nkey valid addr: fffffffffffc0000 [ 2.600806@3] aml_nand_key_check 1251 NO key exist [ 2.605548@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.612171@3] get_free_node 43: bitmap=3ffff [ 2.615984@3] get_free_node 55: bitmap=7ffff [ 2.620413@3] get_free_node 43: bitmap=7ffff [ 2.624437@3] get_free_node 55: bitmap=fffff [ 2.628868@3] get_free_node 43: bitmap=fffff [ 2.632890@3] get_free_node 55: bitmap=1fffff [ 2.637201@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.643842@3] ndtb free list: [ 2.646774@3] blockN=41, ec=-1, dirty_flag=0 [ 2.651001@3] blockN=42, ec=-1, dirty_flag=0 [ 2.655227@3] blockN=43, ec=-1, dirty_flag=0 [ 2.659454@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.677441@3] ndtb valid addr: a00000 [ 2.677461@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.681892@3] get_free_node 43: bitmap=1fffff [ 2.686002@3] get_free_node 55: bitmap=3fffff [ 2.690517@3] get_free_node 43: bitmap=3fffff [ 2.694626@3] get_free_node 55: bitmap=7fffff [ 2.698940@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.705580@3] nddr free list: [ 2.708512@3] blockN=44, ec=-1, dirty_flag=0 [ 2.712738@3] blockN=45, ec=-1, dirty_flag=0 [ 2.716966@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.722053@3] nddr valid addr: fffffffffffc0000 [ 2.726539@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.731285@3] tpl: off 16777216, size 8388608 [ 2.797547@3] Creating 7 MTD partitions on "nandnormal": [ 2.797577@3] 0x000001000000-0x000001800000 : "tpl" [ 2.805030@1] 0x000001800000-0x000001a00000 : "misc" [ 2.808640@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.813339@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.820363@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.825106@0] 0x000003b00000-0x000015300000 : "system" [ 2.864202@0] 0x000015300000-0x000020000000 : "data" [ 2.887437@0] nandnormal initialized ok [ 2.887518@0] aml_ubootenv_init: register env chardev [ 2.890882@0] aml_ubootenv_init: register env chardev OK [ 2.896117@0] amlnf_dtb_init: register dtb cdev [ 2.900612@0] amlnf_dtb_init: register dtd cdev OK [ 2.905177@0] mtd_nand_probe 267 , err = 0 [ 2.909947@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.915506@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.922315@0] unifykey: storage in base: 0xffffffc005000000 [ 2.927260@0] unifykey: storage out base: 0xffffffc005040000 [ 2.932834@0] unifykey: storage block base: 0xffffffc005080000 [ 2.938614@0] unifykey: probe done! [ 2.942512@0] unifykey: no efuse-version set, use default value: -1 [ 2.948291@0] unifykey: key unify config unifykey-num is 6 [ 2.953746@0] unifykey: key unify fact unifykey-num is 6 [ 2.958972@0] unifykey: unifykey_devno: ee00000 [ 2.963832@0] unifykey: device unifykeys created ok [ 2.968379@0] unifykey: aml_unifykeys_init done! [ 2.973147@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.979584@0] amlkaraoke init success! [ 2.982646@0] sysled: module init [ 2.986020@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.990986@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.998116@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.004637@0] amlogic rfkill init [ 3.009296@0] dmc_monitor_probe [ 3.011039@0] page_trace_module_init, create sysfs failed [ 3.016701@0] defendkey defendkey: Reserved memory is not enough! [ 3.022230@0] defendkey: probe of defendkey failed with error -22 [ 3.029206@0] usbcore: registered new interface driver snd-usb-audio [ 3.038476@0] asoc debug: aml_audio_controller_probe-130 [ 3.040365@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.045647@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.053413@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.060585@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.066959@0] aml_tdm_platform_probe(), share en = 1[ 3.071700@0] No channel mask node Channel_Mask [ 3.076484@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.082007@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.089972@0] aml_tdm_platform_probe(), share en = 1[ 3.094470@0] No channel mask node Channel_Mask [ 3.099187@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.104781@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.112728@0] aml_tdm_platform_probe(), share en = 1[ 3.117238@0] No channel mask node Channel_Mask [ 3.122858@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.129895@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.137975@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.147893@0] Register vad [ 3.149063@0] check whether to update sound card init data [ 3.154828@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.161848@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.169159@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.174775@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.182442@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.189774@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.195657@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.202135@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.209179@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.215181@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.222081@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.227889@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.234633@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.243236@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.249526@0] snd_card_add_kcontrols card:ffffffc01c96e818 [ 3.254500@0] effect_v2 is not init [ 3.257933@0] Failed to add VAD controls [ 3.262150@0] GACT probability NOT on [ 3.265444@0] Mirror/redirect action on [ 3.269217@0] u32 classifier [ 3.272052@0] Actions configured [ 3.275586@0] Netfilter messages via NETLINK v0.30. [ 3.280681@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.286867@0] ctnetlink v0.93: registering with nfnetlink. [ 3.292626@3] xt_time: kernel timezone is -0000 [ 3.296591@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.302754@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.307777@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.313341@3] Initializing XFRM netlink socket [ 3.318330@3] NET: Registered protocol family 10 [ 3.323538@3] mip6: Mobile IPv6 [ 3.325418@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.331196@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.338232@3] NET: Registered protocol family 17 [ 3.341548@3] NET: Registered protocol family 15 [ 3.346107@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.359215@3] Bluetooth: RFCOMM TTY layer initialized [ 3.364105@3] Bluetooth: RFCOMM socket layer initialized [ 3.369381@3] Bluetooth: RFCOMM ver 1.11 [ 3.373239@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.378660@3] Bluetooth: BNEP filters: protocol multicast [ 3.384013@3] Bluetooth: BNEP socket layer initialized [ 3.389096@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.395138@3] Bluetooth: HIDP socket layer initialized [ 3.400306@3] l2tp_core: L2TP core driver, V2.0 [ 3.404726@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.409624@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.415349@3] l2tp_netlink: L2TP netlink interface [ 3.420106@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.426163@3] l2tp_debugfs: L2TP debugfs support [ 3.430669@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.437274@3] NET: Registered protocol family 35 [ 3.442037@3] Key type dns_resolver registered [ 3.447205@3] Registered swp emulation handler [ 3.450619@3] Registered cp15_barrier emulation handler [ 3.455776@3] Registered setend emulation handler [ 3.460486@3] disable EAS feature [ 3.464648@2] registered taskstats version 1 [ 3.477382@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.983612@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.983670@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.991826@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.000285@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.007149@0] hub 1-0:1.0: USB hub found [ 4.010203@0] hub 1-0:1.0: 1 port detected [ 4.014534@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.019796@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.027613@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.036595@2] hub 2-0:1.0: USB hub found [ 4.039657@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.046991@2] usb usb2: Unsupported the hub [ 4.051495@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.059513@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.168069@1] dwc_otg: Core Release: 3.10a [ 4.168145@1] dwc_otg: Setting default values for core params [ 4.172271@1] dwc_otg: curmode: 0, host_only: 0 [ 4.189067@1] dwc_otg: Using Buffer DMA mode [ 4.189089@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.192971@1] dwc_otg: Working on port type = SLAVE [ 4.197803@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.204928@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.214032@0] gxbb_pm: enter meson_pm_probe! [ 4.214070@0] no vddio3v3_en pin[ 4.215706@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.220764@0] gxbb_pm: meson_pm_probe done [ 4.22512w 4.231424@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.236850@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.445802@2] ubi0: attaching mtd6 [ 4.973918@2] ubi0: scanning is finished [ 4.978224@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.978507@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.985515@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.992402@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.999469@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.005686@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.013011@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.022243@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.031654@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.037631@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.082392@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.084358@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.094335@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.105109@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.111062@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.289509@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.347443@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.433400@3] ubi1: attaching mtd7 [ 5.759804@3] ubi1: scanning is finished [ 5.763659@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.763805@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.770817@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.777703@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.784767@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.790894@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.798222@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.807454@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.816778@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.826000@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.849839@3] UBIFS (ubi1:0): recovery needed [ 5.911985@0] UBIFS (ubi1:0): recovery completed [ 5.912137@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.918325@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.928324@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.939016@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.945746@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f3108450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.976564@2] aml_tdm_open [ 6.986274@2] asoc-aml-card auge_sound: tdm prepare capture [ 6.986314@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.993399@2] aml_tdm_open [ 6.994501@2] Not init audio effects [ 6.999620@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.005191@3] cpufreq_interactive: no need to active hmp boost! Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.092518@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.096185@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.102251@0] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.151244@0] asoc-aml-card auge_sound: tdm playback enable [ 7.815462@2] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894192 [ 7.815901@2] asoc-aml-card auge_sound: tdm capture stop [ 7.821432@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.826744@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.833198@0] asoc-aml-card auge_sound: tdm capture enable [ 7.844842@2] asoc-aml-card auge_sound: tdm playback stop [ 7.882627@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.688100@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.293589@0] asoc-aml-card auge_sound: tdm playback stop [ 14.293883@3] asoc-aml-card auge_sound: tdm capture stop [ 14.298708@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.291259@0] mtd_nand_reboot_notifier 35 [ 16.291525@0] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.299593@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.303201@0] usb usb2: USB disconnect, device number 1 [ 16.312931@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.313890@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.319203@1] usb usb1: USB disconnect, device number 1 [ 16.328296@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.348128@0] reboot: Restarting system [ 16.348392@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21799 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015875 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974128 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121283@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129126@0] ftrace: allocating 43519 entries in 170 pages [ 0.209521@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210334@0] CPU0: update cpu_capacity 1024 [ 0.214660@0] ASID allocator initialised with 32768 entries [ 0.252639@0] secmon: can't fine clear_range [ 0.253220@0] EFI services will not be available. [ 0.256067@0] Meson chip version = RevC (25:C - 43:0) [ 0.290005@1] Detected VIPT I-cache on CPU1 [ 0.290068@1] CPU1: update cpu_capacity 1024 [ 0.290070@1] CPU1: Booted secondary processor [410fd034] [ 0.318050@2] Detected VIPT I-cache on CPU2 [ 0.318103@2] CPU2: update cpu_capacity 1024 [ 0.318106@2] CPU2: Booted secondary processor [410fd034] [ 0.346113@3] Detected VIPT I-cache on CPU3 [ 0.346164@3] CPU3: update cpu_capacity 1024 [ 0.346167@3] CPU3: Booted secondary processor [410fd034] [ 0.346258@0] Brought up 4 CPUs [ 0.385481@0] SMP: Total of 4 processors activated. [ 0.390390@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396426@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407387@0] CPU: All CPU(s) started at EL2 [ 0.408165@0] alternatives: patching kernel code [ 0.413567@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420704@0] devtmpfs: initialized [ 0.436168@0] DMI not present or invalid. [ 0.436571@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444550@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451118@0] pinctrl core: initialized pinctrl subsystem [ 0.457659@0] NET: Registered protocol family 16 [ 0.481070@0] cpuidle: using governor menu [ 0.481223@0] register canvas platform driver [ 0.483938@0] register rdma platform driver [ 0.489380@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495759@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503253@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509320@0] clkmsr: clkmsr: driver init [ 0.513060@0] codec_mm_module_init [ 0.516502@0] media_configs_system_init [ 0.520637@0] aml_watch_point_probe, in, wp:2 [ 0.526169@0] pstore: using zlib compression [ 0.529567@0] console [pstore-1] enabled [ 0.532894@0] pstore: Registered ramoops as persistent store backend [ 0.539308@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553333@0] aml_iomap: amlogic iomap probe done [ 0.557998@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559934@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568894@0] audio_clocks: audio_clocks_probe done [ 0.577510@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577563@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582743@0] amlogic auge_snd_iomap probe done [ 0.861776@0] vgaarb: loaded [ 0.862166@0] SCSI subsystem initialized [ 0.863282@0] usbcore: registered new interface driver usbfs [ 0.868766@0] usbcore: registered new interface driver hub [ 0.874296@0] usbcore: registered new device driver usb [ 0.879570@0] Linux video capture interface: v2.00 [ 0.884336@0] pps_core: LinuxPPS API ver. 1 registered [ 0.889388@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898780@0] PTP clock support registered [ 0.907129@0] dmi: Firmware registration failed. [ 0.907916@0] secmon: reserve_mem_size:0x300000 [ 0.912124@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.919030@0] secmon: get page:ffffffbf00140000, 5000 [ 0.923769@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932158@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938894@0] fb: osd_init_module [ 0.943378@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.948977@0] Bluetooth: Core ver 2.22 [ 0.952083@0] NET: Registered protocol family 31 [ 0.956683@0] Bluetooth: HCI device and connection manager initialized [ 0.963236@0] Bluetooth: HCI socket layer initialized [ 0.968300@0] Bluetooth: L2CAP socket layer initialized [ 0.973619@0] Bluetooth: SCO socket layer initialized [ 0.979176@0] NetLabel: Initializing [ 0.982202@0] NetLabel: domain hash size = 128 [ 0.986847@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.992008@0] NetLabel: unlabeled traffic allowed by default [ 0.999368@0] clocksource: Switched to clocksource arch_sys_counter [ 1.100111@0] VFS: Disk quotas dquot_6.6.0 [ 1.100214@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118908@1] NET: Registered protocol family 2 [ 1.119672@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.125140@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131790@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.138387@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.144342@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.150997@1] NET: Registered protocol family 1 [ 1.155865@1] RPC: Registered named UNIX socket transport module. [ 1.161480@1] RPC: Registered udp transport module. [ 1.166366@1] RPC: Registered tcp transport module. [ 1.171267@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179330@1] Unpacking initramfs... [ 1.280878@1] Freeing initrd memory: 2308K [ 1.282302@1] hw perfevents: clusterb_enabled = 0 [ 1.284231@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.288596@1] hw perfevents: cluster A irq = 7 [ 1.293102@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.302462@1] audit: initializing netlink subsys (disabled) [ 1.306640@1] audit: type=2000 audit(1.072:1): initialized [ 1.313248@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330278@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332228@3] NFS: Registering the id_resolver key type [ 1.336170@3] Key type id_resolver registered [ 1.340293@3] Key type id_legacy registered [ 1.344784@3] fuse init (API version 7.26) [ 1.353340@3] NET: Registered protocol family 38 [ 1.353386@3] Key type asymmetric registered [ 1.357566@3] Asymmetric key parser 'x509' registered [ 1.362875@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370241@3] io scheduler noop registered (default) [ 1.375206@3] io scheduler deadline registered [ 1.379928@3] io scheduler cfq registered [ 1.394461@2] random: fast init done [ 1.394528@2] random: crng init done [ 1.395038@3] Unable to detect cache hierarchy for CPU 0 [ 1.423249@3] loop: module loaded [ 1.428308@3] zram: Added device: zram0 [ 1.428784@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.434080@3] libphy: Fixed MDIO Bus: probed [ 1.437960@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.442729@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.450283@3] PPP generic driver version 2.4.2 [ 1.453844@3] PPP BSD Compression module registered [ 1.458464@3] PPP Deflate Compression module registered [ 1.463723@3] PPP MPPE Compression module registered [ 1.468683@3] NET: Registered protocol family 24 [ 1.473458@3] usbcore: registered new interface driver asix [ 1.479042@3] usbcore: registered new interface driver ax88179_178a [ 1.485309@3] usbcore: registered new interface driver cdc_ether [ 1.491343@3] usbcore: registered new interface driver net1080 [ 1.497198@3] usbcore: registered new interface driver cdc_subset [ 1.503327@3] usbcore: registered new interface driver zaurus [ 1.509121@3] usbcore: registered new interface driver cdc_ncm [ 1.515616@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.521639@3] ehci-pci: EHCI PCI platform driver [ 1.526373@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.532687@3] ohci-pci: OHCI PCI platform driver [ 1.537850@3] usbcore: registered new interface driver cdc_acm [ 1.543171@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.551483@3] usbcore: registered new interface driver usb-storage [ 1.557747@3] usbcore: registered new interface driver usbserial [ 1.564225@3] mousedev: PS/2 mouse device common for all mice [ 1.569789@3] usbcore: registered new interface driver xpad [ 1.575231@3] i2c /dev entries driver [ 1.578837@3] usbcore: registered new interface driver uvcvideo [ 1.584632@3] USB Video Class driver (1.1.1) [ 1.588914@3] md: linear personality registered for level -1 [ 1.595104@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.604770@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.610571@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.618376@3] usbcore: registered new interface driver usbhid [ 1.622276@3] usbhid: USB HID core driver [ 1.626511@3] ashmem: initialized [ 1.630036@3] logger: created 512K log 'log_main' [ 1.634531@3] logger: created 1K log 'log_events' [ 1.639452@3] logger: created 1K log 'log_radio' [ 1.644087@3] logger: created 16K log 'log_system' [ 1.648521@3] exFAT: Version 1.3.0 [ 1.653779@3] ff803000.serial: clock gate not found [ 1.656895@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.664035@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.679020@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.681610@3] console [ttyS0] enabled [ 1.681610@3] console [ttyS0] enabled [ 1.688811@3] bootconsole [aml_uart0] disabled [ 1.688811@3] bootconsole [aml_uart0] disabled [ 1.698344@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.704783@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.715071@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.724878@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.731386@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.743845@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.747863@2] irq = 20 [ 1.750187@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.759049@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.763499@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.768653@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.775119@2] meson-remote: Driver init [ 1.779074@2] meson-remote: remote_probe [ 1.782695@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.787755@2] meson-remote ff808040.rc: don't find the node [ 1.794296@2] meson-remote ff808040.rc: led_blink = 0 [ 1.799299@2] meson-remote ff808040.rc: don't find the node [ 1.806205@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.811842@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.817545@2] meson-remote ff808040.rc: custom_number = 3 [ 1.822863@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.828542@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.835698@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.841994@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.848141@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.853809@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.860967@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.867263@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.873409@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.879080@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.886237@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.892535@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.898664@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.905386@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.911164@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.916943@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.922635@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.928328@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.934279@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.940145@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.945750@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.951097@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.956446@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.962505@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.969540@1] meson-remote: IR XMP protocol handler initialized [ 1.975108@1] efusekeynum: 4 [ 1.977624@1] efusekeyname: mac offset: 0 size: 6 [ 1.983980@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.990352@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.996738@1] efusekeyname: usid offset: 18 size: 16 [ 2.003523@0] efuse efuse: probe OK! [ 2.008950@0] ge2d: ge2d_init_module [ 2.010694@0] [tsync_pcr_init]init success. [ 2.015238@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.021707@0] DI: di_module_init ok. [ 2.024849@0] dim:dim_module_init [ 2.028106@0] dim:dim_module_init finish [ 2.031781@0] dil:dil_init. [ 2.034713@0] dil:dil_init ok. [ 2.037583@0] vdin_drv_init: major 241 [ 2.041496@0] vdin_drv_init: vdin driver init done [ 2.045992@0] [viuin..]viuin_init_module viuin module init [ 2.051827@0] [viuin..]viuin_probe probe ok. [ 2.055912@0] amlvid:info: amlvideo_init called[ 2.059960@0] amlvid:info: amlvideo_create_instance called [ 2.065387@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.070741@3] amlvideo-000: V4L2 device registered as video10 [ 2.076184@3] amlvid:info: amlvideo_create_instance called [ 2.081612@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.086939@1] amlvideo-001: V4L2 device registered as video23 [ 2.092685@1] PPMGRDRV: warn: ppmgr module init func called [ 2.098863@1] videosync_create_instance dev_s ffffffc01c970c00,dev_s->dev ffffffc01db73080 [ 2.106118@1] videosync_create_instance reg videosync.0 [ 2.111391@1] aml_vecm_init:module init [ 2.111392@3] videosync_thread started [ 2.119102@1] amdolby_vision_init:module init [ 2.123389@1] prime_sl module init [ 2.126985@1] amlogic mtd driver init [ 2.130710@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.135942@1] bl mode descrete [ 2.138856@1] fip_copies 4 [ 2.141548@1] fip_size 0x200000 [ 2.144643@1] nand_clk_ctrl 0xffe07000 [ 2.148356@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.153982@1] nand_clk_ctrl 0xffe07000 [ 2.157684@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.166010@1] plat->aml_nand_device ffffff800a778cf8 [ 2.170529@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.176508@1] NAND device id: c2 dc 90 a2 57 3 [ 2.180708@1] NAND device: Manufacturer ID: [ 2.184751@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.191411@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.196910@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.202431@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.208732@1] mtd->oobavail: 0x10 [ 2.212329@1] aml_nand_init 2119: plat-name:bootloader [ 2.217105@1] Creating 1 MTD partitions on "bootloader": [ 2.222360@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.229854@1] bootloader initialized ok [ 2.231613@1] plat->aml_nand_device ffffff800a778cf8 [ 2.236514@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.242544@1] NAND device id: c2 dc 90 a2 57 3 [ 2.246685@1] NAND device: Manufacturer ID: [ 2.250735@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.257392@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.262900@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.268413@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.274720@1] mtd->oobavail: 0x10 [ 2.278197@1] aml_nand_init 2119: plat-name:nandnormal [ 2.283113@1] bbt_start=20 [ 2.285747@1] env_start=24 [ 2.288420@1] key_start=32 [ 2.291085@1] dtb_start=40 [ 2.293767@1] ddr_start=44 [ 2.296444@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.302923@1] get_free_node 43: bitmap=0 [ 2.306362@1] get_free_node 55: bitmap=1 [ 2.310446@1] get_free_node 43: bitmap=1 [ 2.314123@1] get_free_node 55: bitmap=3 [ 2.318207@1] get_free_node 43: bitmap=3 [ 2.321886@1] get_free_node 55: bitmap=7 [ 2.325768@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.332407@1] nbbt free list: [ 2.335333@1] blockN=21, ec=-1, dirty_flag=0 [ 2.339566@1] blockN=22, ec=-1, dirty_flag=0 [ 2.343793@1] blockN=23, ec=-1, dirty_flag=0 [ 2.348019@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.353427@1] nbbt valid addr: 500000 [ 2.356646@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.362251@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.368501@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.374903@1] get_free_node 43: bitmap=7 [ 2.378380@1] get_free_node 55: bitmap=f [ 2.382464@1] get_free_node 43: bitmap=f [ 2.386142@1] get_free_node 55: bitmap=1f [ 2.390312@1] get_free_node 43: bitmap=1f [ 2.394077@1] get_free_node 55: bitmap=3f [ 2.398248@1] get_free_node 43: bitmap=3f [ 2.402012@1] get_free_node 55: bitmap=7f [ 2.406182@1] get_free_node 43: bitmap=7f [ 2.409947@1] get_free_node 55: bitmap=ff [ 2.414118@1] get_free_node 43: bitmap=ff [ 2.417882@1] get_free_node 55: bitmap=1ff [ 2.422138@1] get_free_node 43: bitmap=1ff [ 2.425989@1] get_free_node 55: bitmap=3ff [ 2.430042@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.436683@1] nenv free list: [ 2.439616@1] blockN=25, ec=-1, dirty_flag=0 [ 2.443842@1] blockN=26, ec=-1, dirty_flag=0 [ 2.448068@1] blockN=27, ec=-1, dirty_flag=0 [ 2.452295@1] blockN=28, ec=-1, dirty_flag=0 [ 2.456521@1] blockN=29, ec=-1, dirty_flag=0 [ 2.460747@1] blockN=30, ec=-1, dirty_flag=0 [ 2.464974@1] blockN=31, ec=-1, dirty_flag=0 [ 2.469200@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.480948@1] nenv valid addr: 610000 [ 2.480967@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.485395@1] get_free_node 43: bitmap=3ff [ 2.489245@1] get_free_node 55: bitmap=7ff [ 2.493501@1] get_free_node 43: bitmap=7ff [ 2.497353@1] get_free_node 55: bitmap=fff [ 2.501609@1] get_free_node 43: bitmap=fff [ 2.505460@1] get_free_node 55: bitmap=1fff [ 2.509803@1] get_free_node 43: bitmap=1fff [ 2.513740@1] get_free_node 55: bitmap=3fff [ 2.518083@1] get_free_node 43: bitmap=3fff [ 2.522020@1] get_free_node 55: bitmap=7fff [ 2.526363@1] get_free_node 43: bitmap=7fff [ 2.530300@1] get_free_node 55: bitmap=ffff [ 2.534643@1] get_free_node 43: bitmap=ffff [ 2.538580@1] get_free_node 55: bitmap=1ffff [ 2.543009@1] get_free_node 43: bitmap=1ffff [ 2.547033@1] get_free_node 55: bitmap=3ffff [ 2.551259@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.557899@1] nkey free list: [ 2.560832@1] blockN=32, ec=-1, dirty_flag=0 [ 2.565059@1] blockN=33, ec=-1, dirty_flag=0 [ 2.569284@1] blockN=34, ec=-1, dirty_flag=0 [ 2.573510@1] blockN=35, ec=-1, dirty_flag=0 [ 2.577737@1] blockN=36, ec=-1, dirty_flag=0 [ 2.581963@1] blockN=37, ec=-1, dirty_flag=0 [ 2.586189@1] blockN=38, ec=-1, dirty_flag=0 [ 2.590415@1] blockN=39, ec=-1, dirty_flag=0 [ 2.594642@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.599731@1] nkey valid addr: fffffffffffc0000 [ 2.604215@1] aml_nand_key_check 1251 NO key exist [ 2.608961@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.615583@1] get_free_node 43: bitmap=3ffff [ 2.619397@1] get_free_node 55: bitmap=7ffff [ 2.623830@1] get_free_node 43: bitmap=7ffff [ 2.627850@1] get_free_node 55: bitmap=fffff [ 2.632282@1] get_free_node 43: bitmap=fffff [ 2.636302@1] get_free_node 55: bitmap=1fffff [ 2.640614@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.647254@1] ndtb free list: [ 2.650187@1] blockN=41, ec=-1, dirty_flag=0 [ 2.654413@1] blockN=42, ec=-1, dirty_flag=0 [ 2.658639@1] blockN=43, ec=-1, dirty_flag=0 [ 2.662866@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.680857@1] ndtb valid addr: a00000 [ 2.680877@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.685305@1] get_free_node 43: bitmap=1fffff [ 2.689415@1] get_free_node 55: bitmap=3fffff [ 2.693929@1] get_free_node 43: bitmap=3fffff [ 2.698040@1] get_free_node 55: bitmap=7fffff [ 2.702351@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.708992@1] nddr free list: [ 2.711925@1] blockN=44, ec=-1, dirty_flag=0 [ 2.716151@1] blockN=45, ec=-1, dirty_flag=0 [ 2.720377@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.725466@1] nddr valid addr: fffffffffffc0000 [ 2.729951@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.734698@1] tpl: off 16777216, size 8388608 [ 2.800998@1] Creating 7 MTD partitions on "nandnormal": [ 2.801042@1] 0x000001000000-0x000001800000 : "tpl" [ 2.808142@1] 0x000001800000-0x000001a00000 : "misc" [ 2.811905@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.817014@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.823857@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.828576@0] 0x000003b00000-0x000015300000 : "system" [ 2.867587@0] 0x000015300000-0x000020000000 : "data" [ 2.890952@0] nandnormal initialized ok [ 2.891034@0] aml_ubootenv_init: register env chardev [ 2.894405@0] aml_ubootenv_init: register env chardev OK [ 2.899624@0] amlnf_dtb_init: register dtb cdev [ 2.904150@0] amlnf_dtb_init: register dtd cdev OK [ 2.908692@0] mtd_nand_probe 267 , err = 0 [ 2.913409@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.919014@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.925829@0] unifykey: storage in base: 0xffffffc005000000 [ 2.930774@0] unifykey: storage out base: 0xffffffc005040000 [ 2.936350@0] unifykey: storage block base: 0xffffffc005080000 [ 2.942129@0] unifykey: probe done! [ 2.946037@0] unifykey: no efuse-version set, use default value: -1 [ 2.951807@0] unifykey: key unify config unifykey-num is 6 [ 2.957263@0] unifykey: key unify fact unifykey-num is 6 [ 2.962489@0] unifykey: unifykey_devno: ee00000 [ 2.967242@0] unifykey: device unifykeys created ok [ 2.971872@0] unifykey: aml_unifykeys_init done! [ 2.976669@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.982992@0] amlkaraoke init success! [ 2.986148@0] sysled: module init [ 2.989537@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.994500@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.001629@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.008157@0] amlogic rfkill init [ 3.012837@0] dmc_monitor_probe [ 3.014549@0] page_trace_module_init, create sysfs failed [ 3.020207@0] defendkey defendkey: Reserved memory is not enough! [ 3.025742@0] defendkey: probe of defendkey failed with error -22 [ 3.032719@0] usbcore: registered new interface driver snd-usb-audio [ 3.042007@0] asoc debug: aml_audio_controller_probe-130 [ 3.043945@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.049139@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.056928@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.064100@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.070476@0] aml_tdm_platform_probe(), share en = 1[ 3.075212@0] No channel mask node Channel_Mask [ 3.079983@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.085518@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.093496@0] aml_tdm_platform_probe(), share en = 1[ 3.097989@0] No channel mask node Channel_Mask [ 3.102719@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.108294@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.116260@0] aml_tdm_platform_probe(), share en = 1[ 3.120761@0] No channel mask node Channel_Mask [ 3.126366@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.133412@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.141526@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.151428@0] Register vad [ 3.152541@0] check whether to update sound card init data [ 3.158413@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.165363@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.172681@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.178286@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.185965@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.193287@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.199164@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.205646@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.212700@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.218694@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.225615@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.231422@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.238230@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.245960@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.252954@2] snd_card_add_kcontrols card:ffffffc01d48f818 [ 3.258006@2] effect_v2 is not init [ 3.261466@2] Failed to add VAD controls [ 3.265675@2] GACT probability NOT on [ 3.268975@2] Mirror/redirect action on [ 3.272731@2] u32 classifier [ 3.275573@2] Actions configured [ 3.279102@2] Netfilter messages via NETLINK v0.30. [ 3.284199@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.290382@2] ctnetlink v0.93: registering with nfnetlink. [ 3.296094@3] xt_time: kernel timezone is -0000 [ 3.300079@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.306287@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.311291@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.316872@3] Initializing XFRM netlink socket [ 3.321856@3] NET: Registered protocol family 10 [ 3.327020@3] mip6: Mobile IPv6 [ 3.328925@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.334704@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.341757@3] NET: Registered protocol family 17 [ 3.345064@3] NET: Registered protocol family 15 [ 3.349624@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.362725@3] Bluetooth: RFCOMM TTY layer initialized [ 3.367620@3] Bluetooth: RFCOMM socket layer initialized [ 3.372896@3] Bluetooth: RFCOMM ver 1.11 [ 3.376751@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.382178@3] Bluetooth: BNEP filters: protocol multicast [ 3.387529@3] Bluetooth: BNEP socket layer initialized [ 3.392617@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.398657@3] Bluetooth: HIDP socket layer initialized [ 3.403817@3] l2tp_core: L2TP core driver, V2.0 [ 3.408241@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.413139@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.418866@3] l2tp_netlink: L2TP netlink interface [ 3.423639@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.429649@3] l2tp_debugfs: L2TP debugfs support [ 3.434185@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.440789@3] NET: Registered protocol family 35 [ 3.445559@3] Key type dns_resolver registered [ 3.450712@3] Registered swp emulation handler [ 3.454200@3] Registered cp15_barrier emulation handler [ 3.459293@3] Registered setend emulation handler [ 3.464026@3] disable EAS feature [ 3.468191@1] registered taskstats version 1 [ 3.480852@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.987053@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.987115@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.995227@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.003720@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.010581@3] hub 1-0:1.0: USB hub found [ 4.013640@3] hub 1-0:1.0: 1 port detected [ 4.017985@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.023234@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.031050@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.040027@2] hub 2-0:1.0: USB hub found [ 4.043105@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.050463@2] usb usb2: Unsupported the hub [ 4.054898@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.062956@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.171506@2] dwc_otg: Core Release: 3.10a [ 4.171545@2] dwc_otg: Setting default values for core params [ 4.175694@2] dwc_otg: curmode: 0, host_only: 0 [ 4.192496@2] dwc_otg: Using Buffer DMA mode [ 4.192518@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.196400@2] dwc_otg: Working on port type = SLAVE [ 4.201233@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.208357@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.217449@0] gxbb_pm: enter meson_pm_probe! [ 4.217488@0] no vddio3v3_en pin[ 4.219127@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.224198@0] gxbb_pm: meson_pm_probe done [ 4.22855: 4.234856@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.240256@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.448599@2] ubi0: attaching mtd6 [ 4.976850@2] ubi0: scanning is finished [ 4.980898@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.981187@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.988196@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.995083@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.002189@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.008367@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.015690@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.024922@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.034332@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.040063@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2005 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.084779@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.086707@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.096743@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.107498@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.113453@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.300636@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.361634@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.446192@3] ubi1: attaching mtd7 [ 5.772624@3] ubi1: scanning is finished [ 5.776432@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776618@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783628@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790516@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797581@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803708@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.811036@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.820268@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829640@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.838930@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.862691@2] UBIFS (ubi1:0): recovery needed [ 5.926431@2] UBIFS (ubi1:0): recovery completed [ 5.926585@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.932773@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.942768@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.953461@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.960250@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f306f450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.990595@2] aml_tdm_open [ 7.002437@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.002477@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.009290@2] aml_tdm_open [ 7.010662@2] Not init audio effects Opened TCP tuning i[ 7.017761@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.021535@1] cpufreq_interactive: no need to active hmp boost! nterface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.110421@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.114099@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.120574@2] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.169245@2] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687558@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21941 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 35 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015884 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975343 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016839@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106555@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129129@0] ftrace: allocating 43519 entries in 170 pages [ 0.209492@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210308@0] CPU0: update cpu_capacity 1024 [ 0.214634@0] ASID allocator initialised with 32768 entries [ 0.252611@0] secmon: can't fine clear_range [ 0.253201@0] EFI services will not be available. [ 0.256042@0] Meson chip version = RevC (25:C - 43:0) [ 0.289958@1] Detected VIPT I-cache on CPU1 [ 0.290021@1] CPU1: update cpu_capacity 1024 [ 0.290023@1] CPU1: Booted secondary processor [410fd034] [ 0.318026@2] Detected VIPT I-cache on CPU2 [ 0.318077@2] CPU2: update cpu_capacity 1024 [ 0.318079@2] CPU2: Booted secondary processor [410fd034] [ 0.346091@3] Detected VIPT I-cache on CPU3 [ 0.346139@3] CPU3: update cpu_capacity 1024 [ 0.346142@3] CPU3: Booted secondary processor [410fd034] [ 0.346233@0] Brought up 4 CPUs [ 0.385455@0] SMP: Total of 4 processors activated. [ 0.390365@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396400@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407360@0] CPU: All CPU(s) started at EL2 [ 0.408141@0] alternatives: patching kernel code [ 0.413545@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420681@0] devtmpfs: initialized [ 0.436131@0] DMI not present or invalid. [ 0.436520@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444508@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451067@0] pinctrl core: initialized pinctrl subsystem [ 0.457681@0] NET: Registered protocol family 16 [ 0.477002@0] cpuidle: using governor menu [ 0.477143@0] register canvas platform driver [ 0.479865@0] register rdma platform driver [ 0.485317@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491689@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499162@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505249@0] clkmsr: clkmsr: driver init [ 0.509001@0] codec_mm_module_init [ 0.512433@0] media_configs_system_init [ 0.516571@0] aml_watch_point_probe, in, wp:2 [ 0.521239@0] pstore: using zlib compression [ 0.525500@0] console [pstore-1] enabled [ 0.528825@0] pstore: Registered ramoops as persistent store backend [ 0.535239@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549279@0] aml_iomap: amlogic iomap probe done [ 0.553980@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555874@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564868@0] audio_clocks: audio_clocks_probe done [ 0.573524@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573580@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578755@0] amlogic auge_snd_iomap probe done [ 0.857846@0] vgaarb: loaded [ 0.858245@0] SCSI subsystem initialized [ 0.859353@0] usbcore: registered new interface driver usbfs [ 0.864832@0] usbcore: registered new interface driver hub [ 0.870356@0] usbcore: registered new device driver usb [ 0.875629@0] Linux video capture interface: v2.00 [ 0.880383@0] pps_core: LinuxPPS API ver. 1 registered [ 0.885476@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894851@0] PTP clock support registered [ 0.899334@0] dmi: Firmware registration failed. [ 0.907908@0] secmon: reserve_mem_size:0x300000 [ 0.908163@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915132@0] secmon: get page:ffffffbf00140000, 5000 [ 0.919842@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928237@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.934962@0] fb: osd_init_module [ 0.939448@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.945065@0] Bluetooth: Core ver 2.22 [ 0.948153@0] NET: Registered protocol family 31 [ 0.952755@0] Bluetooth: HCI device and connection manager initialized [ 0.959306@0] Bluetooth: HCI socket layer initialized [ 0.964372@0] Bluetooth: L2CAP socket layer initialized [ 0.969692@0] Bluetooth: SCO socket layer initialized [ 0.978776@0] NetLabel: Initializing [ 0.978810@0] NetLabel: domain hash size = 128 [ 0.982838@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988061@0] NetLabel: unlabeled traffic allowed by default [ 0.995518@3] clocksource: Switched to clocksource arch_sys_counter [ 1.096043@3] VFS: Disk quotas dquot_6.6.0 [ 1.096149@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115041@1] NET: Registered protocol family 2 [ 1.115802@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121273@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.127916@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.134527@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.140474@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147129@1] NET: Registered protocol family 1 [ 1.151981@1] RPC: Registered named UNIX socket transport module. [ 1.157620@1] RPC: Registered udp transport module. [ 1.162499@1] RPC: Registered tcp transport module. [ 1.167402@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.175461@1] Unpacking initramfs... [ 1.277064@1] Freeing initrd memory: 2308K [ 1.278486@1] hw perfevents: clusterb_enabled = 0 [ 1.280316@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.284750@1] hw perfevents: cluster A irq = 7 [ 1.289305@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.298663@1] audit: initializing netlink subsys (disabled) [ 1.302827@1] audit: type=2000 audit(1.072:1): initialized [ 1.309486@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.330385@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332426@1] NFS: Registering the id_resolver key type [ 1.336075@1] Key type id_resolver registered [ 1.340398@1] Key type id_legacy registered [ 1.344920@1] fuse init (API version 7.26) [ 1.353403@1] NET: Registered protocol family 38 [ 1.353449@1] Key type asymmetric registered [ 1.357651@1] Asymmetric key parser 'x509' registered [ 1.363000@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.370385@1] io scheduler noop registered (default) [ 1.375314@1] io scheduler deadline registered [ 1.380028@1] io scheduler cfq registered [ 1.394672@0] random: fast init done [ 1.394738@0] random: crng init done [ 1.396203@1] Unable to detect cache hierarchy for CPU 0 [ 1.433438@1] loop: module loaded [ 1.434366@1] zram: Added device: zram0 [ 1.435334@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.442688@1] libphy: Fixed MDIO Bus: probed [ 1.446423@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.451167@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.458759@1] PPP generic driver version 2.4.2 [ 1.462327@1] PPP BSD Compression module registered [ 1.466925@1] PPP Deflate Compression module registered [ 1.472166@1] PPP MPPE Compression module registered [ 1.477140@1] NET: Registered protocol family 24 [ 1.481918@1] usbcore: registered new interface driver asix [ 1.487524@1] usbcore: registered new interface driver ax88179_178a [ 1.493768@1] usbcore: registered new interface driver cdc_ether [ 1.499794@1] usbcore: registered new interface driver net1080 [ 1.505663@1] usbcore: registered new interface driver cdc_subset [ 1.511783@1] usbcore: registered new interface driver zaurus [ 1.517588@1] usbcore: registered new interface driver cdc_ncm [ 1.524040@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.530093@1] ehci-pci: EHCI PCI platform driver [ 1.534829@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.541168@1] ohci-pci: OHCI PCI platform driver [ 1.546324@1] usbcore: registered new interface driver cdc_acm [ 1.551617@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.559934@1] usbcore: registered new interface driver usb-storage [ 1.566207@1] usbcore: registered new interface driver usbserial [ 1.572666@3] mousedev: PS/2 mouse device common for all mice [ 1.578332@3] usbcore: registered new interface driver xpad [ 1.583703@1] i2c /dev entries driver [ 1.587275@1] usbcore: registered new interface driver uvcvideo [ 1.593102@1] USB Video Class driver (1.1.1) [ 1.597362@1] md: linear personality registered for level -1 [ 1.603592@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.613158@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.619026@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.626768@1] usbcore: registered new interface driver usbhid [ 1.630723@1] usbhid: USB HID core driver [ 1.634966@1] ashmem: initialized [ 1.638450@1] logger: created 512K log 'log_main' [ 1.642982@1] logger: created 1K log 'log_events' [ 1.647899@1] logger: created 1K log 'log_radio' [ 1.652524@1] logger: created 16K log 'log_system' [ 1.656967@1] exFAT: Version 1.3.0 [ 1.662219@1] ff803000.serial: clock gate not found [ 1.665338@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.672496@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.687473@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.690060@1] console [ttyS0] enabled [ 1.690060@1] console [ttyS0] enabled [ 1.697269@1] bootconsole [aml_uart0] disabled [ 1.697269@1] bootconsole [aml_uart0] disabled [ 1.706798@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.713226@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.723541@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.733296@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.739839@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.752308@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.756320@2] irq = 20 [ 1.758639@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.767478@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.771942@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.777085@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.783577@2] meson-remote: Driver init [ 1.787524@2] meson-remote: remote_probe [ 1.791132@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.796205@2] meson-remote ff808040.rc: don't find the node [ 1.802755@2] meson-remote ff808040.rc: led_blink = 0 [ 1.807760@2] meson-remote ff808040.rc: don't find the node [ 1.814656@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.820294@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.825998@2] meson-remote ff808040.rc: custom_number = 3 [ 1.831314@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.836994@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.844149@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.850451@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.856598@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.862264@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.869421@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.875717@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.881861@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.887534@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.894692@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.900987@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.907117@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.913839@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.919617@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.925396@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.931088@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.936781@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.942732@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.948597@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.954203@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.959551@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.964898@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.970954@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.977882@0] meson-remote: IR XMP protocol handler initialized [ 1.983595@0] efusekeynum: 4 [ 1.986040@0] efusekeyname: mac offset: 0 size: 6 [ 1.992436@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.998806@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.005191@0] efusekeyname: usid offset: 18 size: 16 [ 2.011844@1] efuse efuse: probe OK! [ 2.017382@2] ge2d: ge2d_init_module [ 2.019135@2] [tsync_pcr_init]init success. [ 2.023775@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.030159@1] DI: di_module_init ok. [ 2.033375@1] dim:dim_module_init [ 2.036564@1] dim:dim_module_init finish [ 2.040232@1] dil:dil_init. [ 2.043166@1] dil:dil_init ok. [ 2.046042@1] vdin_drv_init: major 241 [ 2.049964@1] vdin_drv_init: vdin driver init done [ 2.054451@1] [viuin..]viuin_init_module viuin module init [ 2.060269@1] [viuin..]viuin_probe probe ok. [ 2.064383@1] amlvid:info: amlvideo_init called[ 2.068424@1] amlvid:info: amlvideo_create_instance called [ 2.073835@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.079185@2] amlvideo-000: V4L2 device registered as video10 [ 2.084652@2] amlvid:info: amlvideo_create_instance called [ 2.090057@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.095406@0] amlvideo-001: V4L2 device registered as video23 [ 2.101154@0] PPMGRDRV: warn: ppmgr module init func called [ 2.107335@0] videosync_create_instance dev_s ffffffc01d4d6800,dev_s->dev ffffffc01db0b580 [ 2.114576@0] videosync_create_instance reg videosync.0 [ 2.119840@0] aml_vecm_init:module init [ 2.119842@1] videosync_thread started [ 2.127545@0] amdolby_vision_init:module init [ 2.131847@0] prime_sl module init [ 2.135429@0] amlogic mtd driver init [ 2.139185@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.144399@0] bl mode descrete [ 2.147309@0] fip_copies 4 [ 2.150002@0] fip_size 0x200000 [ 2.153101@0] nand_clk_ctrl 0xffe07000 [ 2.156810@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.162437@0] nand_clk_ctrl 0xffe07000 [ 2.166134@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.174468@0] plat->aml_nand_device ffffff800a778cf8 [ 2.178983@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.184965@0] NAND device id: c2 dc 90 a2 57 3 [ 2.189160@0] NAND device: Manufacturer ID: [ 2.193204@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.199863@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.205363@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.210884@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.217185@0] mtd->oobavail: 0x10 [ 2.220808@1] aml_nand_init 2119: plat-name:bootloader [ 2.225575@1] Creating 1 MTD partitions on "bootloader": [ 2.230813@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.238326@1] bootloader initialized ok [ 2.240064@1] plat->aml_nand_device ffffff800a778cf8 [ 2.244956@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.250998@1] NAND device id: c2 dc 90 a2 57 3 [ 2.255135@1] NAND device: Manufacturer ID: [ 2.259185@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.265843@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.271349@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.276866@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.283189@1] mtd->oobavail: 0x10 [ 2.286644@1] aml_nand_init 2119: plat-name:nandnormal [ 2.291554@1] bbt_start=20 [ 2.294191@1] env_start=24 [ 2.296873@1] key_start=32 [ 2.299547@1] dtb_start=40 [ 2.302212@1] ddr_start=44 [ 2.304896@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.311377@1] get_free_node 43: bitmap=0 [ 2.314815@1] get_free_node 55: bitmap=1 [ 2.318899@1] get_free_node 43: bitmap=1 [ 2.322576@1] get_free_node 55: bitmap=3 [ 2.326662@1] get_free_node 43: bitmap=3 [ 2.330339@1] get_free_node 55: bitmap=7 [ 2.334220@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.340861@1] nbbt free list: [ 2.343793@1] blockN=21, ec=-1, dirty_flag=0 [ 2.348019@1] blockN=22, ec=-1, dirty_flag=0 [ 2.352245@1] blockN=23, ec=-1, dirty_flag=0 [ 2.356479@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.361895@1] nbbt valid addr: 500000 [ 2.365101@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.370705@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.376948@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.383357@1] get_free_node 43: bitmap=7 [ 2.386833@1] get_free_node 55: bitmap=f [ 2.390917@1] get_free_node 43: bitmap=f [ 2.394596@1] get_free_node 55: bitmap=1f [ 2.398765@1] get_free_node 43: bitmap=1f [ 2.402530@1] get_free_node 55: bitmap=3f [ 2.406701@1] get_free_node 43: bitmap=3f [ 2.410466@1] get_free_node 55: bitmap=7f [ 2.414635@1] get_free_node 43: bitmap=7f [ 2.418406@1] get_free_node 55: bitmap=ff [ 2.422572@1] get_free_node 43: bitmap=ff [ 2.426335@1] get_free_node 55: bitmap=1ff [ 2.430592@1] get_free_node 43: bitmap=1ff [ 2.434442@1] get_free_node 55: bitmap=3ff [ 2.438497@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.445136@1] nenv free list: [ 2.448069@1] blockN=25, ec=-1, dirty_flag=0 [ 2.452295@1] blockN=26, ec=-1, dirty_flag=0 [ 2.456522@1] blockN=27, ec=-1, dirty_flag=0 [ 2.460748@1] blockN=28, ec=-1, dirty_flag=0 [ 2.464974@1] blockN=29, ec=-1, dirty_flag=0 [ 2.469200@1] blockN=30, ec=-1, dirty_flag=0 [ 2.473427@1] blockN=31, ec=-1, dirty_flag=0 [ 2.477653@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.489433@1] nenv valid addr: 610000 [ 2.489453@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.493882@1] get_free_node 43: bitmap=3ff [ 2.497733@1] get_free_node 55: bitmap=7ff [ 2.501990@1] get_free_node 43: bitmap=7ff [ 2.505840@1] get_free_node 55: bitmap=fff [ 2.510097@1] get_free_node 43: bitmap=fff [ 2.513948@1] get_free_node 55: bitmap=1fff [ 2.518291@1] get_free_node 43: bitmap=1fff [ 2.522228@1] get_free_node 55: bitmap=3fff [ 2.526571@1] get_free_node 43: bitmap=3fff [ 2.530508@1] get_free_node 55: bitmap=7fff [ 2.534851@1] get_free_node 43: bitmap=7fff [ 2.538788@1] get_free_node 55: bitmap=ffff [ 2.543131@1] get_free_node 43: bitmap=ffff [ 2.547068@1] get_free_node 55: bitmap=1ffff [ 2.551504@1] get_free_node 43: bitmap=1ffff [ 2.555520@1] get_free_node 55: bitmap=3ffff [ 2.559746@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.566386@1] nkey free list: [ 2.569319@1] blockN=32, ec=-1, dirty_flag=0 [ 2.573546@1] blockN=33, ec=-1, dirty_flag=0 [ 2.577772@1] blockN=34, ec=-1, dirty_flag=0 [ 2.581998@1] blockN=35, ec=-1, dirty_flag=0 [ 2.586224@1] blockN=36, ec=-1, dirty_flag=0 [ 2.590450@1] blockN=37, ec=-1, dirty_flag=0 [ 2.594677@1] blockN=38, ec=-1, dirty_flag=0 [ 2.598903@1] blockN=39, ec=-1, dirty_flag=0 [ 2.603129@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.608218@1] nkey valid addr: fffffffffffc0000 [ 2.612708@1] aml_nand_key_check 1251 NO key exist [ 2.617448@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.624064@1] get_free_node 43: bitmap=3ffff [ 2.627893@1] get_free_node 55: bitmap=7ffff [ 2.632319@1] get_free_node 43: bitmap=7ffff [ 2.636336@1] get_free_node 55: bitmap=fffff [ 2.640767@1] get_free_node 43: bitmap=fffff [ 2.644789@1] get_free_node 55: bitmap=1fffff [ 2.649101@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.655742@1] ndtb free list: [ 2.658667@1] blockN=41, ec=-1, dirty_flag=0 [ 2.662901@1] blockN=42, ec=-1, dirty_flag=0 [ 2.667127@1] blockN=43, ec=-1, dirty_flag=0 [ 2.671353@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.689372@1] ndtb valid addr: a00000 [ 2.689392@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.693827@1] get_free_node 43: bitmap=1fffff [ 2.697937@1] get_free_node 55: bitmap=3fffff [ 2.702451@1] get_free_node 43: bitmap=3fffff [ 2.706562@1] get_free_node 55: bitmap=7fffff [ 2.710874@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.717514@1] nddr free list: [ 2.720446@1] blockN=44, ec=-1, dirty_flag=0 [ 2.724673@1] blockN=45, ec=-1, dirty_flag=0 [ 2.728899@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.733988@1] nddr valid addr: fffffffffffc0000 [ 2.738473@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.743220@1] tpl: off 16777216, size 8388608 [ 2.809638@1] Creating 7 MTD partitions on "nandnormal": [ 2.809668@1] 0x000001000000-0x000001800000 : "tpl" [ 2.816964@3] 0x000001800000-0x000001a00000 : "misc" [ 2.820638@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.825389@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.832448@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.837193@2] 0x000003b00000-0x000015300000 : "system" [ 2.876218@2] 0x000015300000-0x000020000000 : "data" [ 2.899485@2] nandnormal initialized ok [ 2.899595@2] aml_ubootenv_init: register env chardev [ 2.902908@2] aml_ubootenv_init: register env chardev OK [ 2.908152@2] amlnf_dtb_init: register dtb cdev [ 2.912669@2] amlnf_dtb_init: register dtd cdev OK [ 2.917216@2] mtd_nand_probe 267 , err = 0 [ 2.921968@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.927553@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.934350@2] unifykey: storage in base: 0xffffffc005000000 [ 2.939294@2] unifykey: storage out base: 0xffffffc005040000 [ 2.944879@2] unifykey: storage block base: 0xffffffc005080000 [ 2.950661@2] unifykey: probe done! [ 2.954550@2] unifykey: no efuse-version set, use default value: -1 [ 2.960335@2] unifykey: key unify config unifykey-num is 6 [ 2.965796@2] unifykey: key unify fact unifykey-num is 6 [ 2.971018@2] unifykey: unifykey_devno: ee00000 [ 2.975785@2] unifykey: device unifykeys created ok [ 2.980410@2] unifykey: aml_unifykeys_init done! [ 2.985190@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.991555@2] amlkaraoke init success! [ 2.994651@2] sysled: module init [ 2.998077@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.003032@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.010150@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.016712@0] amlogic rfkill init [ 3.021316@0] dmc_monitor_probe [ 3.023064@0] page_trace_module_init, create sysfs failed [ 3.028738@0] defendkey defendkey: Reserved memory is not enough! [ 3.034276@0] defendkey: probe of defendkey failed with error -22 [ 3.041251@0] usbcore: registered new interface driver snd-usb-audio [ 3.050512@0] asoc debug: aml_audio_controller_probe-130 [ 3.052429@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.057668@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.065452@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.072631@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.079002@0] aml_tdm_platform_probe(), share en = 1[ 3.083750@0] No channel mask node Channel_Mask [ 3.088518@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.094057@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.102026@0] aml_tdm_platform_probe(), share en = 1[ 3.106523@0] No channel mask node Channel_Mask [ 3.111247@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.116825@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.124781@0] aml_tdm_platform_probe(), share en = 1[ 3.129286@0] No channel mask node Channel_Mask [ 3.134885@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.141990@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.150021@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.159998@1] Register vad [ 3.161064@1] check whether to update sound card init data [ 3.166875@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.173899@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.181207@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.186823@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.194520@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.201821@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.207707@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.214180@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.221246@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.227224@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.234089@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.239930@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.246666@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.254267@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.261483@2] snd_card_add_kcontrols card:ffffffc01c8bb818 [ 3.266540@2] effect_v2 is not init [ 3.270011@2] Failed to add VAD controls [ 3.274214@2] GACT probability NOT on [ 3.277488@2] Mirror/redirect action on [ 3.281261@2] u32 classifier [ 3.284098@2] Actions configured [ 3.287647@2] Netfilter messages via NETLINK v0.30. [ 3.292734@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.298927@2] ctnetlink v0.93: registering with nfnetlink. [ 3.304623@0] xt_time: kernel timezone is -0000 [ 3.308629@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.314820@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.319814@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.325393@0] Initializing XFRM netlink socket [ 3.330390@0] NET: Registered protocol family 10 [ 3.335631@0] mip6: Mobile IPv6 [ 3.337424@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.343259@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.350261@0] NET: Registered protocol family 17 [ 3.353590@0] NET: Registered protocol family 15 [ 3.358158@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.371268@0] Bluetooth: RFCOMM TTY layer initialized [ 3.376149@0] Bluetooth: RFCOMM socket layer initialized [ 3.381429@0] Bluetooth: RFCOMM ver 1.11 [ 3.385281@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.390708@0] Bluetooth: BNEP filters: protocol multicast [ 3.396061@0] Bluetooth: BNEP socket layer initialized [ 3.401147@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.407186@0] Bluetooth: HIDP socket layer initialized [ 3.412348@0] l2tp_core: L2TP core driver, V2.0 [ 3.416769@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.421670@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.427396@0] l2tp_netlink: L2TP netlink interface [ 3.432164@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.438176@0] l2tp_debugfs: L2TP debugfs support [ 3.442715@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.449317@0] NET: Registered protocol family 35 [ 3.454092@0] Key type dns_resolver registered [ 3.459249@0] Registered swp emulation handler [ 3.462739@0] Registered cp15_barrier emulation handler [ 3.467881@0] Registered setend emulation handler [ 3.472533@0] disable EAS feature [ 3.476630@2] registered taskstats version 1 [ 3.489454@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.995653@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.995712@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.003907@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.012317@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.019189@3] hub 1-0:1.0: USB hub found [ 4.022235@3] hub 1-0:1.0: 1 port detected [ 4.026578@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.031838@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.039683@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.048622@1] hub 2-0:1.0: USB hub found [ 4.051721@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.059007@1] usb usb2: Unsupported the hub [ 4.063516@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.071554@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.180134@0] dwc_otg: Core Release: 3.10a [ 4.180173@0] dwc_otg: Setting default values for core params [ 4.184341@0] dwc_otg: curmode: 0, host_only: 0 [ 4.201132@0] dwc_otg: Using Buffer DMA mode [ 4.201154@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.205035@0] dwc_otg: Working on port type = SLAVE [ 4.209867@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.216997@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.226467@0] gxbb_pm: enter meson_pm_probe! [ 4.226506@0] no vddio3v3_en pin[ 4.228172@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.233199@0] gxbb_pm: meson_pm_probe done [ 4.23756[ 4.243829@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.249267@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.458172@0] ubi0: attaching mtd6 [ 4.986681@0] ubi0: scanning is finished [ 4.990822@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.991106@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.998116@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.005002@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.012068@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.018281@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.025609@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.034884@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.044254@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.049908@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.094663@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.096634@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.106601@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.117380@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.123332@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.305139@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.362946@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.449967@0] ubi1: attaching mtd7 [ 5.776465@0] ubi1: scanning is finished [ 5.780250@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.780466@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.787474@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.794361@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.801428@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.807555@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.814883@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.824115@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.833439@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.842683@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.866441@1] UBIFS (ubi1:0): recovery needed [ 5.931055@1] UBIFS (ubi1:0): recovery completed [ 5.931213@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.937401@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.947391@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.958084@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.964813@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2b5e450 --- 0 [ 6.991916@3] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.002779@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.004564@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.011099@0] aml_tdm_open [ 7.012864@0] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.027112@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.029809@1] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.110814@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.114483@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.120398@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.169477@1] asoc-aml-card auge_sound: tdm playback enable [ 7.183124@0] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894034 [ 7.183544@0] asoc-aml-card auge_sound: tdm capture stop [ 7.188944@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.194319@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.200351@1] asoc-aml-card auge_sound: tdm capture enable [ 7.212386@0] asoc-aml-card auge_sound: tdm playback stop [ 7.249912@1] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687666@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.349130@3] asoc-aml-card auge_sound: tdm playback stop [ 13.349508@0] asoc-aml-card auge_sound: tdm capture stop [ 13.354254@0] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.343189@2] mtd_nand_reboot_notifier 35 [ 15.343451@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.351463@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.355330@2] usb usb2: USB disconnect, device number 1 [ 15.362275@0] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.365793@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.370956@0] usb usb1: USB disconnect, device number 1 [ 15.378759@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.399554@0] reboot: Restarting system [ 15.399622@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22026 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 35 25 0b 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015884 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1973935 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016835@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129130@0] ftrace: allocating 43519 entries in 170 pages [ 0.209575@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210387@0] CPU0: update cpu_capacity 1024 [ 0.214713@0] ASID allocator initialised with 32768 entries [ 0.252693@0] secmon: can't fine clear_range [ 0.253275@0] EFI services will not be available. [ 0.256118@0] Meson chip version = RevC (25:C - 43:0) [ 0.290054@1] Detected VIPT I-cache on CPU1 [ 0.290115@1] CPU1: update cpu_capacity 1024 [ 0.290118@1] CPU1: Booted secondary processor [410fd034] [ 0.318107@2] Detected VIPT I-cache on CPU2 [ 0.318163@2] CPU2: update cpu_capacity 1024 [ 0.318165@2] CPU2: Booted secondary processor [410fd034] [ 0.346165@3] Detected VIPT I-cache on CPU3 [ 0.346214@3] CPU3: update cpu_capacity 1024 [ 0.346216@3] CPU3: Booted secondary processor [410fd034] [ 0.346306@0] Brought up 4 CPUs [ 0.385525@0] SMP: Total of 4 processors activated. [ 0.390435@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396470@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407429@0] CPU: All CPU(s) started at EL2 [ 0.408210@0] alternatives: patching kernel code [ 0.413613@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420748@0] devtmpfs: initialized [ 0.436178@0] DMI not present or invalid. [ 0.436564@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444563@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451124@0] pinctrl core: initialized pinctrl subsystem [ 0.457657@0] NET: Registered protocol family 16 [ 0.485063@3] cpuidle: using governor menu [ 0.485210@3] register canvas platform driver [ 0.487927@3] register rdma platform driver [ 0.493380@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499734@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507220@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513328@3] clkmsr: clkmsr: driver init [ 0.517052@3] codec_mm_module_init [ 0.520496@3] media_configs_system_init [ 0.524627@3] aml_watch_point_probe, in, wp:2 [ 0.530168@3] pstore: using zlib compression [ 0.533550@3] console [pstore-1] enabled [ 0.536884@3] pstore: Registered ramoops as persistent store backend [ 0.543291@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557331@3] aml_iomap: amlogic iomap probe done [ 0.561942@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563924@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572893@3] audio_clocks: audio_clocks_probe done [ 0.581471@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581526@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586680@3] amlogic auge_snd_iomap probe done [ 0.861878@3] vgaarb: loaded [ 0.862272@3] SCSI subsystem initialized [ 0.863397@3] usbcore: registered new interface driver usbfs [ 0.868869@3] usbcore: registered new interface driver hub [ 0.874394@3] usbcore: registered new device driver usb [ 0.879671@3] Linux video capture interface: v2.00 [ 0.884440@3] pps_core: LinuxPPS API ver. 1 registered [ 0.889497@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898879@3] PTP clock support registered [ 0.907235@3] dmi: Firmware registration failed. [ 0.911264@3] secmon: reserve_mem_size:0x300000 [ 0.912196@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.919183@3] secmon: get page:ffffffbf00140000, 5000 [ 0.923874@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932263@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.939003@3] fb: osd_init_module [ 0.943485@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.949057@3] Bluetooth: Core ver 2.22 [ 0.952188@3] NET: Registered protocol family 31 [ 0.956780@3] Bluetooth: HCI device and connection manager initialized [ 0.963345@3] Bluetooth: HCI socket layer initialized [ 0.968406@3] Bluetooth: L2CAP socket layer initialized [ 0.973699@3] Bluetooth: SCO socket layer initialized [ 0.986781@3] NetLabel: Initializing [ 0.986812@3] NetLabel: domain hash size = 128 [ 0.989249@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.994501@3] NetLabel: unlabeled traffic allowed by default [ 1.001940@2] clocksource: Switched to clocksource arch_sys_counter [ 1.102469@2] VFS: Disk quotas dquot_6.6.0 [ 1.102577@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.121193@3] NET: Registered protocol family 2 [ 1.121801@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.127427@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.134066@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.140662@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.146625@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.153297@3] NET: Registered protocol family 1 [ 1.158194@3] RPC: Registered named UNIX socket transport module. [ 1.163767@3] RPC: Registered udp transport module. [ 1.168650@3] RPC: Registered tcp transport module. [ 1.173549@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.181578@3] Unpacking initramfs... [ 1.283211@3] Freeing initrd memory: 2308K [ 1.284610@3] hw perfevents: clusterb_enabled = 0 [ 1.286553@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.290920@3] hw perfevents: cluster A irq = 7 [ 1.295432@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.304833@3] audit: initializing netlink subsys (disabled) [ 1.308966@3] audit: type=2000 audit(1.152:1): initialized [ 1.315611@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.332554@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.334552@3] NFS: Registering the id_resolver key type [ 1.338254@3] Key type id_resolver registered [ 1.342565@3] Key type id_legacy registered [ 1.347072@3] fuse init (API version 7.26) [ 1.355606@3] NET: Registered protocol family 38 [ 1.355652@3] Key type asymmetric registered [ 1.359820@3] Asymmetric key parser 'x509' registered [ 1.365165@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.372557@3] io scheduler noop registered (default) [ 1.377474@3] io scheduler deadline registered [ 1.382182@3] io scheduler cfq registered [ 1.396719@1] random: fast init done [ 1.396785@1] random: crng init done [ 1.397306@3] Unable to detect cache hierarchy for CPU 0 [ 1.430621@3] loop: module loaded [ 1.431643@3] zram: Added device: zram0 [ 1.432505@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.439978@3] libphy: Fixed MDIO Bus: probed [ 1.443587@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.448356@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.455928@3] PPP generic driver version 2.4.2 [ 1.459493@3] PPP BSD Compression module registered [ 1.464098@3] PPP Deflate Compression module registered [ 1.469349@3] PPP MPPE Compression module registered [ 1.474317@3] NET: Registered protocol family 24 [ 1.479098@3] usbcore: registered new interface driver asix [ 1.484682@3] usbcore: registered new interface driver ax88179_178a [ 1.490956@3] usbcore: registered new interface driver cdc_ether [ 1.496986@3] usbcore: registered new interface driver net1080 [ 1.502847@3] usbcore: registered new interface driver cdc_subset [ 1.508966@3] usbcore: registered new interface driver zaurus [ 1.514759@3] usbcore: registered new interface driver cdc_ncm [ 1.521208@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.527281@3] ehci-pci: EHCI PCI platform driver [ 1.532017@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.538325@3] ohci-pci: OHCI PCI platform driver [ 1.543486@3] usbcore: registered new interface driver cdc_acm [ 1.548805@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.557116@3] usbcore: registered new interface driver usb-storage [ 1.563411@3] usbcore: registered new interface driver usbserial [ 1.569864@3] mousedev: PS/2 mouse device common for all mice [ 1.575440@3] usbcore: registered new interface driver xpad [ 1.580873@3] i2c /dev entries driver [ 1.584479@3] usbcore: registered new interface driver uvcvideo [ 1.590268@3] USB Video Class driver (1.1.1) [ 1.594548@3] md: linear personality registered for level -1 [ 1.600742@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.610414@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.616209@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.623974@1] usbcore: registered new interface driver usbhid [ 1.627915@1] usbhid: USB HID core driver [ 1.632173@2] ashmem: initialized [ 1.635644@1] logger: created 512K log 'log_main' [ 1.640170@2] logger: created 1K log 'log_events' [ 1.644939@1] logger: created 1K log 'log_radio' [ 1.649524@2] logger: created 16K log 'log_system' [ 1.654147@2] exFAT: Version 1.3.0 [ 1.658828@2] ff803000.serial: clock gate not found [ 1.662527@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.669672@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.684655@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.687262@2] console [ttyS0] enabled [ 1.687262@2] console [ttyS0] enabled [ 1.694494@2] bootconsole [aml_uart0] disabled [ 1.694494@2] bootconsole [aml_uart0] disabled [ 1.703969@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.710410@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.720687@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.730528@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.737015@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.749399@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.753515@0] irq = 20 [ 1.755836@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.764647@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.769609@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.774718@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.780751@0] meson-remote: Driver init [ 1.784729@0] meson-remote: remote_probe [ 1.788314@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.793379@0] meson-remote ff808040.rc: don't find the node [ 1.799931@0] meson-remote ff808040.rc: led_blink = 0 [ 1.804934@0] meson-remote ff808040.rc: don't find the node [ 1.811834@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.817481@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.823175@0] meson-remote ff808040.rc: custom_number = 3 [ 1.828499@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.834176@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.841338@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.847629@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.853778@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.859445@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.866603@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.872899@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.879044@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.884716@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.891874@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.898170@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.904299@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.911022@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.916800@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.922578@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.928271@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.933963@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.939914@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.945780@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.951386@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.956733@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.962081@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.968211@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.975185@0] meson-remote: IR XMP protocol handler initialized [ 1.980740@0] efusekeynum: 4 [ 1.983260@0] efusekeyname: mac offset: 0 size: 6 [ 1.989607@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.995992@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.002369@0] efusekeyname: usid offset: 18 size: 16 [ 2.009055@3] efuse efuse: probe OK! [ 2.014797@0] ge2d: ge2d_init_module [ 2.016325@0] [tsync_pcr_init]init success. [ 2.020881@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.027325@3] DI: di_module_init ok. [ 2.030476@3] dim:dim_module_init [ 2.033688@3] dim:dim_module_init finish [ 2.037397@3] dil:dil_init. [ 2.040343@3] dil:dil_init ok. [ 2.043213@3] vdin_drv_init: major 241 [ 2.047144@3] vdin_drv_init: vdin driver init done [ 2.051643@3] [viuin..]viuin_init_module viuin module init [ 2.057450@3] [viuin..]viuin_probe probe ok. [ 2.061535@3] amlvid:info: amlvideo_init called[ 2.065599@3] amlvid:info: amlvideo_create_instance called [ 2.071049@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.076386@1] amlvideo-000: V4L2 device registered as video10 [ 2.081829@1] amlvid:info: amlvideo_create_instance called [ 2.087234@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.092545@2] amlvideo-001: V4L2 device registered as video23 [ 2.098325@2] PPMGRDRV: warn: ppmgr module init func called [ 2.104470@3] videosync_create_instance dev_s ffffffc01ca0a000,dev_s->dev ffffffc01c941180 [ 2.111760@3] videosync_create_instance reg videosync.0 [ 2.117146@3] aml_vecm_init:module init [ 2.117147@2] videosync_thread started [ 2.124742@3] amdolby_vision_init:module init [ 2.129020@3] prime_sl module init [ 2.132638@3] amlogic mtd driver init [ 2.136359@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.141574@3] bl mode descrete [ 2.144516@3] fip_copies 4 [ 2.147174@3] fip_size 0x200000 [ 2.150278@3] nand_clk_ctrl 0xffe07000 [ 2.153986@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.159614@3] nand_clk_ctrl 0xffe07000 [ 2.163316@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.171631@3] plat->aml_nand_device ffffff800a778cf8 [ 2.176160@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.182139@3] NAND device id: c2 dc 90 a2 57 3 [ 2.186339@3] NAND device: Manufacturer ID: [ 2.190386@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.197046@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.202545@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.208067@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.214368@3] mtd->oobavail: 0x10 [ 2.217973@3] aml_nand_init 2119: plat-name:bootloader [ 2.222732@3] Creating 1 MTD partitions on "bootloader": [ 2.228009@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.235946@2] bootloader initialized ok [ 2.237218@2] plat->aml_nand_device ffffff800a778cf8 [ 2.242160@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.248187@2] NAND device id: c2 dc 90 a2 57 3 [ 2.252319@2] NAND device: Manufacturer ID: [ 2.256371@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.263026@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.268530@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.274048@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.280356@2] mtd->oobavail: 0x10 [ 2.283842@2] aml_nand_init 2119: plat-name:nandnormal [ 2.288741@2] bbt_start=20 [ 2.291382@2] env_start=24 [ 2.294055@2] key_start=32 [ 2.296721@2] dtb_start=40 [ 2.299403@2] ddr_start=44 [ 2.302078@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.308556@2] get_free_node 43: bitmap=0 [ 2.311998@2] get_free_node 55: bitmap=1 [ 2.316081@2] get_free_node 43: bitmap=1 [ 2.319759@2] get_free_node 55: bitmap=3 [ 2.323843@2] get_free_node 43: bitmap=3 [ 2.327522@2] get_free_node 55: bitmap=7 [ 2.331403@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.338043@2] nbbt free list: [ 2.340968@2] blockN=21, ec=-1, dirty_flag=0 [ 2.345202@2] blockN=22, ec=-1, dirty_flag=0 [ 2.349433@2] blockN=23, ec=-1, dirty_flag=0 [ 2.353655@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.359063@2] nbbt valid addr: 500000 [ 2.362281@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.367887@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.374133@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.380538@2] get_free_node 43: bitmap=7 [ 2.384015@2] get_free_node 55: bitmap=f [ 2.388099@2] get_free_node 43: bitmap=f [ 2.391778@2] get_free_node 55: bitmap=1f [ 2.395948@2] get_free_node 43: bitmap=1f [ 2.399713@2] get_free_node 55: bitmap=3f [ 2.403882@2] get_free_node 43: bitmap=3f [ 2.407648@2] get_free_node 55: bitmap=7f [ 2.411818@2] get_free_node 43: bitmap=7f [ 2.415582@2] get_free_node 55: bitmap=ff [ 2.419753@2] get_free_node 43: bitmap=ff [ 2.423518@2] get_free_node 55: bitmap=1ff [ 2.427774@2] get_free_node 43: bitmap=1ff [ 2.431624@2] get_free_node 55: bitmap=3ff [ 2.435679@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.442319@2] nenv free list: [ 2.445244@2] blockN=25, ec=-1, dirty_flag=0 [ 2.449478@2] blockN=26, ec=-1, dirty_flag=0 [ 2.453704@2] blockN=27, ec=-1, dirty_flag=0 [ 2.457930@2] blockN=28, ec=-1, dirty_flag=0 [ 2.462157@2] blockN=29, ec=-1, dirty_flag=0 [ 2.466383@2] blockN=30, ec=-1, dirty_flag=0 [ 2.470609@2] blockN=31, ec=-1, dirty_flag=0 [ 2.474835@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.486602@2] nenv valid addr: 610000 [ 2.486621@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.491056@2] get_free_node 43: bitmap=3ff [ 2.494907@2] get_free_node 55: bitmap=7ff [ 2.499163@2] get_free_node 43: bitmap=7ff [ 2.503019@2] get_free_node 55: bitmap=fff [ 2.507271@2] get_free_node 43: bitmap=fff [ 2.511122@2] get_free_node 55: bitmap=1fff [ 2.515464@2] get_free_node 43: bitmap=1fff [ 2.519402@2] get_free_node 55: bitmap=3fff [ 2.523744@2] get_free_node 43: bitmap=3fff [ 2.527682@2] get_free_node 55: bitmap=7fff [ 2.532024@2] get_free_node 43: bitmap=7fff [ 2.535962@2] get_free_node 55: bitmap=ffff [ 2.540304@2] get_free_node 43: bitmap=ffff [ 2.544242@2] get_free_node 55: bitmap=1ffff [ 2.548670@2] get_free_node 43: bitmap=1ffff [ 2.552694@2] get_free_node 55: bitmap=3ffff [ 2.556920@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.563560@2] nkey free list: [ 2.566493@2] blockN=32, ec=-1, dirty_flag=0 [ 2.570720@2] blockN=33, ec=-1, dirty_flag=0 [ 2.574946@2] blockN=34, ec=-1, dirty_flag=0 [ 2.579172@2] blockN=35, ec=-1, dirty_flag=0 [ 2.583397@2] blockN=36, ec=-1, dirty_flag=0 [ 2.587625@2] blockN=37, ec=-1, dirty_flag=0 [ 2.591851@2] blockN=38, ec=-1, dirty_flag=0 [ 2.596077@2] blockN=39, ec=-1, dirty_flag=0 [ 2.600303@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.605392@2] nkey valid addr: fffffffffffc0000 [ 2.609877@2] aml_nand_key_check 1251 NO key exist [ 2.614622@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.621238@2] get_free_node 43: bitmap=3ffff [ 2.625058@2] get_free_node 55: bitmap=7ffff [ 2.629487@2] get_free_node 43: bitmap=7ffff [ 2.633511@2] get_free_node 55: bitmap=fffff [ 2.637947@2] get_free_node 43: bitmap=fffff [ 2.641963@2] get_free_node 55: bitmap=1fffff [ 2.646290@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.652916@2] ndtb free list: [ 2.655849@2] blockN=41, ec=-1, dirty_flag=0 [ 2.660075@2] blockN=42, ec=-1, dirty_flag=0 [ 2.664301@2] blockN=43, ec=-1, dirty_flag=0 [ 2.668527@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.686517@2] ndtb valid addr: a00000 [ 2.686536@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.690966@2] get_free_node 43: bitmap=1fffff [ 2.695076@2] get_free_node 55: bitmap=3fffff [ 2.699600@2] get_free_node 43: bitmap=3fffff [ 2.703701@2] get_free_node 55: bitmap=7fffff [ 2.708013@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.714654@2] nddr free list: [ 2.717578@2] blockN=44, ec=-1, dirty_flag=0 [ 2.721812@2] blockN=45, ec=-1, dirty_flag=0 [ 2.726039@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.731127@2] nddr valid addr: fffffffffffc0000 [ 2.735613@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.740359@2] tpl: off 16777216, size 8388608 [ 2.806639@2] Creating 7 MTD partitions on "nandnormal": [ 2.806669@2] 0x000001000000-0x000001800000 : "tpl" [ 2.813846@0] 0x000001800000-0x000001a00000 : "misc" [ 2.818030@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.823131@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.829810@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.839052@3] 0x000003b00000-0x000015300000 : "system" [ 2.875932@3] 0x000015300000-0x000020000000 : "data" [ 2.899249@3] nandnormal initialized ok [ 2.899330@3] aml_ubootenv_init: register env chardev [ 2.902702@3] aml_ubootenv_init: register env chardev OK [ 2.907921@3] amlnf_dtb_init: register dtb cdev [ 2.912429@3] amlnf_dtb_init: register dtd cdev OK [ 2.916991@3] mtd_nand_probe 267 , err = 0 [ 2.921699@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.927311@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.934209@3] unifykey: storage in base: 0xffffffc005000000 [ 2.939062@3] unifykey: storage out base: 0xffffffc005040000 [ 2.944648@3] unifykey: storage block base: 0xffffffc005080000 [ 2.950426@3] unifykey: probe done! [ 2.954368@3] unifykey: no efuse-version set, use default value: -1 [ 2.960106@3] unifykey: key unify config unifykey-num is 6 [ 2.965560@3] unifykey: key unify fact unifykey-num is 6 [ 2.970790@3] unifykey: unifykey_devno: ee00000 [ 2.975566@3] unifykey: device unifykeys created ok [ 2.980185@3] unifykey: aml_unifykeys_init done! [ 2.984962@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.991296@3] amlkaraoke init success! [ 2.994456@3] sysled: module init [ 2.997796@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.002806@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.009914@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.016447@3] amlogic rfkill init [ 3.021101@3] dmc_monitor_probe [ 3.022905@3] page_trace_module_init, create sysfs failed [ 3.036545@3] defendkey defendkey: Reserved memory is not enough! [ 3.037016@3] defendkey: probe of defendkey failed with error -22 [ 3.044044@3] usbcore: registered new interface driver snd-usb-audio [ 3.053280@3] asoc debug: aml_audio_controller_probe-130 [ 3.055160@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.060442@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.068231@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.075399@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.081776@3] aml_tdm_platform_probe(), share en = 1[ 3.086515@3] No channel mask node Channel_Mask [ 3.091307@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.096869@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.104789@3] aml_tdm_platform_probe(), share en = 1[ 3.109287@3] No channel mask node Channel_Mask [ 3.114023@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.119596@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.127539@3] aml_tdm_platform_probe(), share en = 1[ 3.132056@3] No channel mask node Channel_Mask [ 3.137649@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.144710@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.152793@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.162789@3] Register vad [ 3.163836@3] check whether to update sound card init data [ 3.169697@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.176676@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.183978@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.189593@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.197261@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.204592@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.210467@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.216954@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.224049@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.230002@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.236896@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.242705@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.249475@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.258187@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.264231@1] snd_card_add_kcontrols card:ffffffc01d571818 [ 3.269306@1] effect_v2 is not init [ 3.272738@1] Failed to add VAD controls [ 3.276992@1] GACT probability NOT on [ 3.280259@1] Mirror/redirect action on [ 3.284033@1] u32 classifier [ 3.286870@1] Actions configured [ 3.290412@1] Netfilter messages via NETLINK v0.30. [ 3.295496@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.301679@1] ctnetlink v0.93: registering with nfnetlink. [ 3.307520@2] xt_time: kernel timezone is -0000 [ 3.311397@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.317579@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.322584@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.328160@2] Initializing XFRM netlink socket [ 3.333145@2] NET: Registered protocol family 10 [ 3.338572@2] mip6: Mobile IPv6 [ 3.340196@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.346053@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.353028@2] NET: Registered protocol family 17 [ 3.356358@2] NET: Registered protocol family 15 [ 3.360927@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.374073@2] Bluetooth: RFCOMM TTY layer initialized [ 3.378920@2] Bluetooth: RFCOMM socket layer initialized [ 3.384198@2] Bluetooth: RFCOMM ver 1.11 [ 3.388052@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.393480@2] Bluetooth: BNEP filters: protocol multicast [ 3.398831@2] Bluetooth: BNEP socket layer initialized [ 3.403929@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.409956@2] Bluetooth: HIDP socket layer initialized [ 3.415129@2] l2tp_core: L2TP core driver, V2.0 [ 3.419545@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.424442@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.430167@2] l2tp_netlink: L2TP netlink interface [ 3.434944@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.440956@2] l2tp_debugfs: L2TP debugfs support [ 3.445487@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.452092@2] NET: Registered protocol family 35 [ 3.456850@2] Key type dns_resolver registered [ 3.462044@2] Registered swp emulation handler [ 3.465415@2] Registered cp15_barrier emulation handler [ 3.470600@2] Registered setend emulation handler [ 3.475317@2] disable EAS feature [ 3.479448@0] registered taskstats version 1 [ 3.492155@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.998404@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.998464@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.006624@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.015077@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.022034@1] hub 1-0:1.0: USB hub found [ 4.024964@1] hub 1-0:1.0: 1 port detected [ 4.029355@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.034594@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.042414@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.051319@3] hub 2-0:1.0: USB hub found [ 4.054529@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.061768@3] usb usb2: Unsupported the hub [ 4.066267@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.074315@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.182729@3] dwc_otg: Core Release: 3.10a [ 4.182797@3] dwc_otg: Setting default values for core params [ 4.186925@3] dwc_otg: curmode: 0, host_only: 0 [ 4.203724@3] dwc_otg: Using Buffer DMA mode [ 4.203748@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.207625@3] dwc_otg: Working on port type = SLAVE [ 4.212458@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.219593@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.228665@3] gxbb_pm: enter meson_pm_probe! [ 4.228704@3] no vddio3v3_en pin[ 4.230383@3] pm-meson aml_pm: Can't get switch_clk81 [ 4.235379@3] gxbb_pm: meson_pm_probe done [ 4.23976[ 4.246031@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.251474@3] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.461348@2] ubi0: attaching mtd6 [ 4.989350@2] ubi0: scanning is finished [ 4.993553@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.993844@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.000881@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.007742@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.014806@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.021027@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.028347@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.037579@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.046989@2] ubi0: background thread "ubi_bgt0d" started, PID 2004 [ 5.052691@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2007 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.097428@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.099392@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.109372@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.120144@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.126097@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.319359@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.380268@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.466048@1] ubi1: attaching mtd7 [ 5.792396@1] ubi1: scanning is finished [ 5.796264@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.796391@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.803399@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.810287@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.817352@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.823480@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.830808@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.840040@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.849365@1] ubi1: background thread "ubi_bgt1d" started, PID 2035 UBI device number 1, total 692 L[ 5.858664@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2039 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.882375@3] UBIFS (ubi1:0): recovery needed [ 5.948766@0] UBIFS (ubi1:0): recovery completed [ 5.948925@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.955116@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.965102@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.975794@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.982525@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2127, tid:f2b77450 --- 0 OK [ 7.014456@1] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 7.025623@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.025663@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.033003@3] aml_tdm_open [ 7.033847@3] Not init audio effects Opened TCP tuning interf[ 7.042097@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.045065@1] cpufreq_interactive: no need to active hmp boost! ace on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.133692@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.137342@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.143788@3] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.192509@3] asoc-aml-card auge_sound: tdm playback enable [ 8.610141@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21940 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 35 25 0b 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015886 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974101 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016842@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129134@0] ftrace: allocating 43519 entries in 170 pages [ 0.209447@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210255@0] CPU0: update cpu_capacity 1024 [ 0.214581@0] ASID allocator initialised with 32768 entries [ 0.252596@0] secmon: can't fine clear_range [ 0.253177@0] EFI services will not be available. [ 0.256021@0] Meson chip version = RevC (25:C - 43:0) [ 0.289945@1] Detected VIPT I-cache on CPU1 [ 0.290006@1] CPU1: update cpu_capacity 1024 [ 0.290009@1] CPU1: Booted secondary processor [410fd034] [ 0.317998@2] Detected VIPT I-cache on CPU2 [ 0.318052@2] CPU2: update cpu_capacity 1024 [ 0.318054@2] CPU2: Booted secondary processor [410fd034] [ 0.346071@3] Detected VIPT I-cache on CPU3 [ 0.346121@3] CPU3: update cpu_capacity 1024 [ 0.346123@3] CPU3: Booted secondary processor [410fd034] [ 0.346213@0] Brought up 4 CPUs [ 0.385429@0] SMP: Total of 4 processors activated. [ 0.390338@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396374@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407338@0] CPU: All CPU(s) started at EL2 [ 0.408114@0] alternatives: patching kernel code [ 0.413519@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420652@0] devtmpfs: initialized [ 0.436099@0] DMI not present or invalid. [ 0.436480@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444484@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451042@0] pinctrl core: initialized pinctrl subsystem [ 0.457592@0] NET: Registered protocol family 16 [ 0.484972@3] cpuidle: using governor menu [ 0.485123@3] register canvas platform driver [ 0.487838@3] register rdma platform driver [ 0.493294@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499659@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507125@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513232@3] clkmsr: clkmsr: driver init [ 0.516967@3] codec_mm_module_init [ 0.520409@3] media_configs_system_init [ 0.524539@3] aml_watch_point_probe, in, wp:2 [ 0.529202@3] pstore: using zlib compression [ 0.533455@3] console [pstore-1] enabled [ 0.536796@3] pstore: Registered ramoops as persistent store backend [ 0.543203@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557266@0] aml_iomap: amlogic iomap probe done [ 0.562078@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563951@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572954@3] audio_clocks: audio_clocks_probe done [ 0.581555@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581610@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586769@3] amlogic auge_snd_iomap probe done [ 0.873391@3] vgaarb: loaded [ 0.873776@3] SCSI subsystem initialized [ 0.874892@3] usbcore: registered new interface driver usbfs [ 0.880367@3] usbcore: registered new interface driver hub [ 0.885904@3] usbcore: registered new device driver usb [ 0.891201@3] Linux video capture interface: v2.00 [ 0.895917@3] pps_core: LinuxPPS API ver. 1 registered [ 0.901002@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.910384@3] PTP clock support registered [ 0.914899@3] dmi: Firmware registration failed. [ 0.919534@3] secmon: reserve_mem_size:0x300000 [ 0.923733@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.930618@3] secmon: get page:ffffffbf00140000, 5000 [ 0.935380@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.943768@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.950508@3] fb: osd_init_module [ 0.954951@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.960602@3] Bluetooth: Core ver 2.22 [ 0.963694@3] NET: Registered protocol family 31 [ 0.968286@3] Bluetooth: HCI device and connection manager initialized [ 0.974857@3] Bluetooth: HCI socket layer initialized [ 0.979912@3] Bluetooth: L2CAP socket layer initialized [ 0.985206@3] Bluetooth: SCO socket layer initialized [ 0.998284@3] NetLabel: Initializing [ 0.998315@3] NetLabel: domain hash size = 128 [ 1.000755@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.006013@3] NetLabel: unlabeled traffic allowed by default [ 1.013376@1] clocksource: Switched to clocksource arch_sys_counter [ 1.113916@1] VFS: Disk quotas dquot_6.6.0 [ 1.114025@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.132768@0] NET: Registered protocol family 2 [ 1.133508@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.139007@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.145667@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.152487@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.158246@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.164899@2] NET: Registered protocol family 1 [ 1.169775@2] RPC: Registered named UNIX socket transport module. [ 1.175360@2] RPC: Registered udp transport module. [ 1.180228@2] RPC: Registered tcp transport module. [ 1.185128@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.193195@2] Unpacking initramfs... [ 1.294830@2] Freeing initrd memory: 2308K [ 1.296227@2] hw perfevents: clusterb_enabled = 0 [ 1.298173@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.302544@2] hw perfevents: cluster A irq = 7 [ 1.307054@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.316436@2] audit: initializing netlink subsys (disabled) [ 1.320586@2] audit: type=2000 audit(1.164:1): initialized [ 1.327232@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.348174@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.350163@2] NFS: Registering the id_resolver key type [ 1.353868@2] Key type id_resolver registered [ 1.358199@2] Key type id_legacy registered [ 1.362704@2] fuse init (API version 7.26) [ 1.371213@2] NET: Registered protocol family 38 [ 1.371259@2] Key type asymmetric registered [ 1.375441@2] Asymmetric key parser 'x509' registered [ 1.380781@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.388173@2] io scheduler noop registered (default) [ 1.393106@2] io scheduler deadline registered [ 1.397820@2] io scheduler cfq registered [ 1.412533@3] random: fast init done [ 1.412599@3] random: crng init done [ 1.413122@2] Unable to detect cache hierarchy for CPU 0 [ 1.449281@2] loop: module loaded [ 1.454296@2] zram: Added device: zram0 [ 1.454686@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.460395@2] libphy: Fixed MDIO Bus: probed [ 1.463976@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.468702@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.476373@2] PPP generic driver version 2.4.2 [ 1.479838@2] PPP BSD Compression module registered [ 1.484456@2] PPP Deflate Compression module registered [ 1.489702@2] PPP MPPE Compression module registered [ 1.494675@2] NET: Registered protocol family 24 [ 1.499442@2] usbcore: registered new interface driver asix [ 1.505033@2] usbcore: registered new interface driver ax88179_178a [ 1.511319@2] usbcore: registered new interface driver cdc_ether [ 1.517334@2] usbcore: registered new interface driver net1080 [ 1.523186@2] usbcore: registered new interface driver cdc_subset [ 1.529312@2] usbcore: registered new interface driver zaurus [ 1.535104@2] usbcore: registered new interface driver cdc_ncm [ 1.541590@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.547621@2] ehci-pci: EHCI PCI platform driver [ 1.552362@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.558703@2] ohci-pci: OHCI PCI platform driver [ 1.563862@2] usbcore: registered new interface driver cdc_acm [ 1.569152@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.577508@2] usbcore: registered new interface driver usb-storage [ 1.583746@2] usbcore: registered new interface driver usbserial [ 1.590240@3] mousedev: PS/2 mouse device common for all mice [ 1.595791@3] usbcore: registered new interface driver xpad [ 1.601257@2] i2c /dev entries driver [ 1.604830@2] usbcore: registered new interface driver uvcvideo [ 1.610619@2] USB Video Class driver (1.1.1) [ 1.614902@2] md: linear personality registered for level -1 [ 1.621103@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.630750@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.636568@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.644337@1] usbcore: registered new interface driver usbhid [ 1.648258@1] usbhid: USB HID core driver [ 1.652517@0] ashmem: initialized [ 1.656018@1] logger: created 512K log 'log_main' [ 1.660497@0] logger: created 1K log 'log_events' [ 1.665219@1] logger: created 1K log 'log_radio' [ 1.669919@0] logger: created 16K log 'log_system' [ 1.674499@0] exFAT: Version 1.3.0 [ 1.679410@1] ff803000.serial: clock gate not found [ 1.682882@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.690029@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.705008@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.707622@1] console [ttyS0] enabled [ 1.707622@1] console [ttyS0] enabled [ 1.714828@3] bootconsole [aml_uart0] disabled [ 1.714828@3] bootconsole [aml_uart0] disabled [ 1.724483@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.730751@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.741070@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.750860@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.757388@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.769812@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.773844@0] irq = 20 [ 1.776173@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.784973@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.789958@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.795043@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.801106@0] meson-remote: Driver init [ 1.805086@0] meson-remote: remote_probe [ 1.808672@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.813738@0] meson-remote ff808040.rc: don't find the node [ 1.820291@0] meson-remote ff808040.rc: led_blink = 0 [ 1.825292@0] meson-remote ff808040.rc: don't find the node [ 1.832187@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.837831@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.843529@0] meson-remote ff808040.rc: custom_number = 3 [ 1.848851@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.854527@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.861697@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.867983@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.874133@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.879798@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.886956@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.893251@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.899396@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.905068@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.912227@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.918523@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.924652@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.931375@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.937152@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.942931@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.948623@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.954316@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.960267@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.966132@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.971738@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.977086@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.982433@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.988623@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.995458@2] meson-remote: IR XMP protocol handler initialized [ 2.001093@2] efusekeynum: 4 [ 2.003619@2] efusekeyname: mac offset: 0 size: 6 [ 2.009959@2] efusekeyname: mac_bt offset: 6 size: 6 [ 2.016340@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.022728@2] efusekeyname: usid offset: 18 size: 16 [ 2.029414@0] efuse efuse: probe OK! [ 2.035078@2] ge2d: ge2d_init_module [ 2.036684@2] [tsync_pcr_init]init success. [ 2.041207@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.047694@2] DI: di_module_init ok. [ 2.050825@2] dim:dim_module_init [ 2.054095@2] dim:dim_module_init finish [ 2.057766@2] dil:dil_init. [ 2.060703@2] dil:dil_init ok. [ 2.063569@2] vdin_drv_init: major 241 [ 2.067482@2] vdin_drv_init: vdin driver init done [ 2.071984@2] [viuin..]viuin_init_module viuin module init [ 2.077828@2] [viuin..]viuin_probe probe ok. [ 2.081901@2] amlvid:info: amlvideo_init called[ 2.085955@2] amlvid:info: amlvideo_create_instance called [ 2.091375@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.096877@2] amlvideo-000: V4L2 device registered as video10 [ 2.102169@2] amlvid:info: amlvideo_create_instance called [ 2.107584@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.112936@1] amlvideo-001: V4L2 device registered as video23 [ 2.118700@1] PPMGRDRV: warn: ppmgr module init func called [ 2.125046@1] videosync_create_instance dev_s ffffffc01c95c400,dev_s->dev ffffffc01db8af80 [ 2.132109@1] videosync_create_instance reg videosync.0 [ 2.137522@1] aml_vecm_init:module init [ 2.137523@2] videosync_thread started [ 2.145110@1] amdolby_vision_init:module init [ 2.149382@1] prime_sl module init [ 2.152963@1] amlogic mtd driver init [ 2.156687@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.161940@1] bl mode descrete [ 2.164845@1] fip_copies 4 [ 2.167528@1] fip_size 0x200000 [ 2.170636@1] nand_clk_ctrl 0xffe07000 [ 2.174339@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.179972@1] nand_clk_ctrl 0xffe07000 [ 2.183669@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.191996@1] plat->aml_nand_device ffffff800a778cf8 [ 2.196512@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.202494@1] NAND device id: c2 dc 90 a2 57 3 [ 2.206691@1] NAND device: Manufacturer ID: [ 2.210739@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.217399@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.222898@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.228419@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.234726@1] mtd->oobavail: 0x10 [ 2.238342@2] aml_nand_init 2119: plat-name:bootloader [ 2.243100@2] Creating 1 MTD partitions on "bootloader": [ 2.248348@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.256305@2] bootloader initialized ok [ 2.257599@2] plat->aml_nand_device ffffff800a778cf8 [ 2.262491@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.268532@2] NAND device id: c2 dc 90 a2 57 3 [ 2.272671@2] NAND device: Manufacturer ID: [ 2.276720@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.283386@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.288879@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.294403@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.300705@2] mtd->oobavail: 0x10 [ 2.304225@2] aml_nand_init 2119: plat-name:nandnormal [ 2.309101@2] bbt_start=20 [ 2.311735@2] env_start=24 [ 2.314408@2] key_start=32 [ 2.317074@2] dtb_start=40 [ 2.319755@2] ddr_start=44 [ 2.322445@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.328906@2] get_free_node 43: bitmap=0 [ 2.332350@2] get_free_node 55: bitmap=1 [ 2.336434@2] get_free_node 43: bitmap=1 [ 2.340112@2] get_free_node 55: bitmap=3 [ 2.344196@2] get_free_node 43: bitmap=3 [ 2.347874@2] get_free_node 55: bitmap=7 [ 2.351755@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.358395@2] nbbt free list: [ 2.361320@2] blockN=21, ec=-1, dirty_flag=0 [ 2.365555@2] blockN=22, ec=-1, dirty_flag=0 [ 2.369781@2] blockN=23, ec=-1, dirty_flag=0 [ 2.374007@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.379415@2] nbbt valid addr: 500000 [ 2.382633@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.388239@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.394481@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.400892@2] get_free_node 43: bitmap=7 [ 2.404368@2] get_free_node 55: bitmap=f [ 2.408452@2] get_free_node 43: bitmap=f [ 2.412130@2] get_free_node 55: bitmap=1f [ 2.416300@2] get_free_node 43: bitmap=1f [ 2.420065@2] get_free_node 55: bitmap=3f [ 2.424235@2] get_free_node 43: bitmap=3f [ 2.428000@2] get_free_node 55: bitmap=7f [ 2.432170@2] get_free_node 43: bitmap=7f [ 2.435935@2] get_free_node 55: bitmap=ff [ 2.440105@2] get_free_node 43: bitmap=ff [ 2.443870@2] get_free_node 55: bitmap=1ff [ 2.448136@2] get_free_node 43: bitmap=1ff [ 2.451979@2] get_free_node 55: bitmap=3ff [ 2.456030@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.462678@2] nenv free list: [ 2.465605@2] blockN=25, ec=-1, dirty_flag=0 [ 2.469831@2] blockN=26, ec=-1, dirty_flag=0 [ 2.474057@2] blockN=27, ec=-1, dirty_flag=0 [ 2.478283@2] blockN=28, ec=-1, dirty_flag=0 [ 2.482509@2] blockN=29, ec=-1, dirty_flag=0 [ 2.486735@2] blockN=30, ec=-1, dirty_flag=0 [ 2.490962@2] blockN=31, ec=-1, dirty_flag=0 [ 2.495188@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.506926@2] nenv valid addr: 610000 [ 2.506946@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.511374@2] get_free_node 43: bitmap=3ff [ 2.515225@2] get_free_node 55: bitmap=7ff [ 2.519503@2] get_free_node 43: bitmap=7ff [ 2.523332@2] get_free_node 55: bitmap=fff [ 2.527588@2] get_free_node 43: bitmap=fff [ 2.531440@2] get_free_node 55: bitmap=1fff [ 2.535782@2] get_free_node 43: bitmap=1fff [ 2.539720@2] get_free_node 55: bitmap=3fff [ 2.544062@2] get_free_node 43: bitmap=3fff [ 2.548000@2] get_free_node 55: bitmap=7fff [ 2.552342@2] get_free_node 43: bitmap=7fff [ 2.556280@2] get_free_node 55: bitmap=ffff [ 2.560623@2] get_free_node 43: bitmap=ffff [ 2.564560@2] get_free_node 55: bitmap=1ffff [ 2.568989@2] get_free_node 43: bitmap=1ffff [ 2.573012@2] get_free_node 55: bitmap=3ffff [ 2.577238@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.583878@2] nkey free list: [ 2.586812@2] blockN=32, ec=-1, dirty_flag=0 [ 2.591038@2] blockN=33, ec=-1, dirty_flag=0 [ 2.595264@2] blockN=34, ec=-1, dirty_flag=0 [ 2.599490@2] blockN=35, ec=-1, dirty_flag=0 [ 2.603716@2] blockN=36, ec=-1, dirty_flag=0 [ 2.607942@2] blockN=37, ec=-1, dirty_flag=0 [ 2.612169@2] blockN=38, ec=-1, dirty_flag=0 [ 2.616395@2] blockN=39, ec=-1, dirty_flag=0 [ 2.620621@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.625710@2] nkey valid addr: fffffffffffc0000 [ 2.630195@2] aml_nand_key_check 1251 NO key exist [ 2.634940@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.641565@2] get_free_node 43: bitmap=3ffff [ 2.645391@2] get_free_node 55: bitmap=7ffff [ 2.649806@2] get_free_node 43: bitmap=7ffff [ 2.653829@2] get_free_node 55: bitmap=fffff [ 2.658257@2] get_free_node 43: bitmap=fffff [ 2.662281@2] get_free_node 55: bitmap=1fffff [ 2.666595@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.673233@2] ndtb free list: [ 2.676166@2] blockN=41, ec=-1, dirty_flag=0 [ 2.680393@2] blockN=42, ec=-1, dirty_flag=0 [ 2.684619@2] blockN=43, ec=-1, dirty_flag=0 [ 2.688845@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.706851@2] ndtb valid addr: a00000 [ 2.706870@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.711302@2] get_free_node 43: bitmap=1fffff [ 2.715411@2] get_free_node 55: bitmap=3fffff [ 2.719926@2] get_free_node 43: bitmap=3fffff [ 2.724036@2] get_free_node 55: bitmap=7fffff [ 2.728348@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.734989@2] nddr free list: [ 2.737921@2] blockN=44, ec=-1, dirty_flag=0 [ 2.742147@2] blockN=45, ec=-1, dirty_flag=0 [ 2.746374@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.751463@2] nddr valid addr: fffffffffffc0000 [ 2.755948@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.760695@2] tpl: off 16777216, size 8388608 [ 2.826994@2] Creating 7 MTD partitions on "nandnormal": [ 2.827024@2] 0x000001000000-0x000001800000 : "tpl" [ 2.834186@2] 0x000001800000-0x000001a00000 : "misc" [ 2.837922@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.842773@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.849817@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.854555@2] 0x000003b00000-0x000015300000 : "system" [ 2.893501@2] 0x000015300000-0x000020000000 : "data" [ 2.916712@2] nandnormal initialized ok [ 2.916794@2] aml_ubootenv_init: register env chardev [ 2.920169@2] aml_ubootenv_init: register env chardev OK [ 2.925402@2] amlnf_dtb_init: register dtb cdev [ 2.929916@2] amlnf_dtb_init: register dtd cdev OK [ 2.934452@2] mtd_nand_probe 267 , err = 0 [ 2.939193@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.944771@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.951619@2] unifykey: storage in base: 0xffffffc005000000 [ 2.956527@2] unifykey: storage out base: 0xffffffc005040000 [ 2.962118@2] unifykey: storage block base: 0xffffffc005080000 [ 2.967953@2] unifykey: probe done! [ 2.971802@2] unifykey: no efuse-version set, use default value: -1 [ 2.977572@2] unifykey: key unify config unifykey-num is 6 [ 2.983026@2] unifykey: key unify fact unifykey-num is 6 [ 2.988249@2] unifykey: unifykey_devno: ee00000 [ 2.993014@2] unifykey: device unifykeys created ok [ 2.997648@2] unifykey: aml_unifykeys_init done! [ 3.002426@2] audio_dsp: [dsp]register dsp to char divece(257) [ 3.008868@2] amlkaraoke init success! [ 3.011927@2] sysled: module init [ 3.015305@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.020270@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.027387@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.033918@2] amlogic rfkill init [ 3.038549@2] dmc_monitor_probe [ 3.040307@2] page_trace_module_init, create sysfs failed [ 3.049991@2] defendkey defendkey: Reserved memory is not enough! [ 3.051476@2] defendkey: probe of defendkey failed with error -22 [ 3.058475@2] usbcore: registered new interface driver snd-usb-audio [ 3.067732@2] asoc debug: aml_audio_controller_probe-130 [ 3.069602@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.074898@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.082691@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.089863@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.096239@2] aml_tdm_platform_probe(), share en = 1[ 3.100979@2] No channel mask node Channel_Mask [ 3.105766@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.111282@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.119248@2] aml_tdm_platform_probe(), share en = 1[ 3.123749@2] No channel mask node Channel_Mask [ 3.128488@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.134061@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.141991@2] aml_tdm_platform_probe(), share en = 1[ 3.146518@2] No channel mask node Channel_Mask [ 3.152111@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.159174@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.167254@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.177119@2] Register vad [ 3.178345@2] check whether to update sound card init data [ 3.184150@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.191133@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.198440@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.204054@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.211723@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.219054@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.224917@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.231413@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.238471@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.244468@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.251342@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.257167@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.263906@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.271511@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.278691@0] snd_card_add_kcontrols card:ffffffc01ca08818 [ 3.283778@0] effect_v2 is not init [ 3.287224@0] Failed to add VAD controls [ 3.291438@0] GACT probability NOT on [ 3.294728@0] Mirror/redirect action on [ 3.298496@0] u32 classifier [ 3.301324@0] Actions configured [ 3.304879@0] Netfilter messages via NETLINK v0.30. [ 3.309961@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.316142@0] ctnetlink v0.93: registering with nfnetlink. [ 3.321868@3] xt_time: kernel timezone is -0000 [ 3.325847@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.332036@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.337068@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.342631@3] Initializing XFRM netlink socket [ 3.347618@3] NET: Registered protocol family 10 [ 3.352806@3] mip6: Mobile IPv6 [ 3.354691@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.360485@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.367483@3] NET: Registered protocol family 17 [ 3.370832@3] NET: Registered protocol family 15 [ 3.375387@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.388490@3] Bluetooth: RFCOMM TTY layer initialized [ 3.393381@3] Bluetooth: RFCOMM socket layer initialized [ 3.398658@3] Bluetooth: RFCOMM ver 1.11 [ 3.402516@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.407942@3] Bluetooth: BNEP filters: protocol multicast [ 3.413293@3] Bluetooth: BNEP socket layer initialized [ 3.418379@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.424419@3] Bluetooth: HIDP socket layer initialized [ 3.429598@3] l2tp_core: L2TP core driver, V2.0 [ 3.434004@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.438904@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.444627@3] l2tp_netlink: L2TP netlink interface [ 3.449395@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.455413@3] l2tp_debugfs: L2TP debugfs support [ 3.459948@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.466563@3] NET: Registered protocol family 35 [ 3.471313@3] Key type dns_resolver registered [ 3.476479@3] Registered swp emulation handler [ 3.479974@3] Registered cp15_barrier emulation handler [ 3.485057@3] Registered setend emulation handler [ 3.489771@3] disable EAS feature [ 3.493976@1] registered taskstats version 1 [ 3.506656@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.012876@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.012935@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.021077@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.029548@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.036410@0] hub 1-0:1.0: USB hub found [ 4.039492@0] hub 1-0:1.0: 1 port detected [ 4.043790@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.049060@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.056878@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.065824@2] hub 2-0:1.0: USB hub found [ 4.068912@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.076246@2] usb usb2: Unsupported the hub [ 4.080687@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.088770@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.197180@2] dwc_otg: Core Release: 3.10a [ 4.197219@2] dwc_otg: Setting default values for core params [ 4.201378@2] dwc_otg: curmode: 0, host_only: 0 [ 4.218177@2] dwc_otg: Using Buffer DMA mode [ 4.218210@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.222090@2] dwc_otg: Working on port type = SLAVE [ 4.226930@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.233936@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.243085@2] gxbb_pm: enter meson_pm_probe! [ 4.243123@2] no vddio3v3_en pin[ 4.244761@2] pm-meson aml_pm: Can't get switch_clk81 [ 4.249819@2] gxbb_pm: meson_pm_probe done [ 4.25417V 4.260460@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.265888@2] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.475552@0] ubi0: attaching mtd6 [ 5.003909@0] ubi0: scanning is finished [ 5.008099@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 5.008392@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.015399@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.022287@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.029353@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.035562@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.042898@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.052123@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.061540@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.067240@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.112070@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.114050@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.124015@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.134786@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.140738@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.322814@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.383824@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.467432@0] ubi1: attaching mtd7 [ 5.794163@0] ubi1: scanning is finished [ 5.798084@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.798203@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.805215@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.812097@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.819162@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.825288@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.832617@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.841848@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.851170@2] ubi1: background thread "ubi_bgt1d" started, PID 2032 UBI device number 1, total 692 L[ 5.860502@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.884319@0] UBIFS (ubi1:0): recovery needed [ 5.951165@0] UBIFS (ubi1:0): recovery completed [ 5.951323@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.957498@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.967496@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.978228@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.984920@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: OK skip network Init because /sys/class/net/eth0 is not exist -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2e47450 --- 0 [ 7.024136@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.028423@2] cpufreq_interactive: no need to active hmp boost! [ 7.028971@3] aml_tdm_open [ 7.036840@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.042449@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.049041@3] aml_tdm_open [ 7.050716@3] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.149260@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.152897@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.158818@0] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.207789@0] asoc-aml-card auge_sound: tdm playback enable [ 8.609578@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot Failed to open gpio value for reading! bypass gpio changed = -1 The system is going down NOW! Sent SIGTERM to all processes [ 14.333695@3] asoc-aml-card auge_sound: tdm playback stop [ 14.333892@3] asoc-aml-card auge_sound: tdm capture stop [ 14.338810@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.332992@1] mtd_nand_reboot_notifier 35 [ 16.333252@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.341904@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.344669@1] usb usb2: USB disconnect, device number 1 [ 16.354731@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.355621@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.360944@3] usb usb1: USB disconnect, device number 1 [ 16.369625@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.389409@0] reboot: Restarting system [ 16.389593@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21797 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015875 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974634 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106555@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129130@0] ftrace: allocating 43519 entries in 170 pages [ 0.209543@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210352@0] CPU0: update cpu_capacity 1024 [ 0.214678@0] ASID allocator initialised with 32768 entries [ 0.252654@0] secmon: can't fine clear_range [ 0.253253@0] EFI services will not be available. [ 0.256085@0] Meson chip version = RevC (25:C - 43:0) [ 0.290013@1] Detected VIPT I-cache on CPU1 [ 0.290073@1] CPU1: update cpu_capacity 1024 [ 0.290076@1] CPU1: Booted secondary processor [410fd034] [ 0.318063@2] Detected VIPT I-cache on CPU2 [ 0.318115@2] CPU2: update cpu_capacity 1024 [ 0.318117@2] CPU2: Booted secondary processor [410fd034] [ 0.346133@3] Detected VIPT I-cache on CPU3 [ 0.346182@3] CPU3: update cpu_capacity 1024 [ 0.346185@3] CPU3: Booted secondary processor [410fd034] [ 0.346277@0] Brought up 4 CPUs [ 0.385499@0] SMP: Total of 4 processors activated. [ 0.390408@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396444@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407407@0] CPU: All CPU(s) started at EL2 [ 0.408184@0] alternatives: patching kernel code [ 0.413587@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420721@0] devtmpfs: initialized [ 0.436171@0] DMI not present or invalid. [ 0.436568@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444553@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451114@0] pinctrl core: initialized pinctrl subsystem [ 0.457725@0] NET: Registered protocol family 16 [ 0.485058@0] cpuidle: using governor menu [ 0.485209@0] register canvas platform driver [ 0.487926@0] register rdma platform driver [ 0.493373@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499748@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507232@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513345@0] clkmsr: clkmsr: driver init [ 0.517059@0] codec_mm_module_init [ 0.520494@0] media_configs_system_init [ 0.524633@0] aml_watch_point_probe, in, wp:2 [ 0.530168@0] pstore: using zlib compression [ 0.533559@0] console [pstore-1] enabled [ 0.536884@0] pstore: Registered ramoops as persistent store backend [ 0.543296@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557324@0] aml_iomap: amlogic iomap probe done [ 0.561926@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563923@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572887@0] audio_clocks: audio_clocks_probe done [ 0.581426@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581480@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586648@0] amlogic auge_snd_iomap probe done [ 0.865675@0] vgaarb: loaded [ 0.866073@0] SCSI subsystem initialized [ 0.867194@0] usbcore: registered new interface driver usbfs [ 0.872674@0] usbcore: registered new interface driver hub [ 0.878195@0] usbcore: registered new device driver usb [ 0.883479@0] Linux video capture interface: v2.00 [ 0.888219@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893290@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902710@0] PTP clock support registered [ 0.907180@0] dmi: Firmware registration failed. [ 0.915730@0] secmon: reserve_mem_size:0x300000 [ 0.915995@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.922964@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927673@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.936066@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942803@0] fb: osd_init_module [ 0.947287@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.952898@0] Bluetooth: Core ver 2.22 [ 0.955980@0] NET: Registered protocol family 31 [ 0.960587@0] Bluetooth: HCI device and connection manager initialized [ 0.967137@0] Bluetooth: HCI socket layer initialized [ 0.972203@0] Bluetooth: L2CAP socket layer initialized [ 0.977521@0] Bluetooth: SCO socket layer initialized [ 0.986603@0] NetLabel: Initializing [ 0.986636@0] NetLabel: domain hash size = 128 [ 0.990669@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.995905@0] NetLabel: unlabeled traffic allowed by default [ 1.003394@2] clocksource: Switched to clocksource arch_sys_counter [ 1.103793@2] VFS: Disk quotas dquot_6.6.0 [ 1.103900@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.122564@3] NET: Registered protocol family 2 [ 1.123271@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.128800@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.135468@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142226@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148037@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.154675@0] NET: Registered protocol family 1 [ 1.159520@0] RPC: Registered named UNIX socket transport module. [ 1.165131@0] RPC: Registered udp transport module. [ 1.170037@0] RPC: Registered tcp transport module. [ 1.174923@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.182943@0] Unpacking initramfs... [ 1.284634@0] Freeing initrd memory: 2308K [ 1.286054@0] hw perfevents: clusterb_enabled = 0 [ 1.287885@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.292318@0] hw perfevents: cluster A irq = 7 [ 1.296872@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.306243@0] audit: initializing netlink subsys (disabled) [ 1.310396@0] audit: type=2000 audit(1.080:1): initialized [ 1.317065@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.337899@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.343865@0] NFS: Registering the id_resolver key type [ 1.343927@0] Key type id_resolver registered [ 1.347930@0] Key type id_legacy registered [ 1.352444@0] fuse init (API version 7.26) [ 1.360912@0] NET: Registered protocol family 38 [ 1.360957@0] Key type asymmetric registered [ 1.365161@0] Asymmetric key parser 'x509' registered [ 1.370496@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.377854@0] io scheduler noop registered (default) [ 1.382825@0] io scheduler deadline registered [ 1.387579@0] io scheduler cfq registered [ 1.402088@1] random: fast init done [ 1.402156@1] random: crng init done [ 1.402683@0] Unable to detect cache hierarchy for CPU 0 [ 1.438992@0] loop: module loaded [ 1.444016@0] zram: Added device: zram0 [ 1.444425@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.449626@0] libphy: Fixed MDIO Bus: probed [ 1.454520@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.458437@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.466087@0] PPP generic driver version 2.4.2 [ 1.469550@0] PPP BSD Compression module registered [ 1.474171@0] PPP Deflate Compression module registered [ 1.479430@0] PPP MPPE Compression module registered [ 1.484393@0] NET: Registered protocol family 24 [ 1.489195@0] usbcore: registered new interface driver asix [ 1.494751@0] usbcore: registered new interface driver ax88179_178a [ 1.501023@0] usbcore: registered new interface driver cdc_ether [ 1.507047@0] usbcore: registered new interface driver net1080 [ 1.512908@0] usbcore: registered new interface driver cdc_subset [ 1.519048@0] usbcore: registered new interface driver zaurus [ 1.524834@0] usbcore: registered new interface driver cdc_ncm [ 1.531265@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.537355@0] ehci-pci: EHCI PCI platform driver [ 1.542093@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.548397@0] ohci-pci: OHCI PCI platform driver [ 1.553571@0] usbcore: registered new interface driver cdc_acm [ 1.558877@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.567202@0] usbcore: registered new interface driver usb-storage [ 1.573459@0] usbcore: registered new interface driver usbserial [ 1.579945@0] mousedev: PS/2 mouse device common for all mice [ 1.585482@0] usbcore: registered new interface driver xpad [ 1.590954@0] i2c /dev entries driver [ 1.594563@0] usbcore: registered new interface driver uvcvideo [ 1.600339@0] USB Video Class driver (1.1.1) [ 1.604644@0] md: linear personality registered for level -1 [ 1.610805@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.620478@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.626270@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.634033@2] usbcore: registered new interface driver usbhid [ 1.637994@2] usbhid: USB HID core driver [ 1.642242@3] ashmem: initialized [ 1.645707@2] logger: created 512K log 'log_main' [ 1.650219@3] logger: created 1K log 'log_events' [ 1.654975@2] logger: created 1K log 'log_radio' [ 1.659653@3] logger: created 16K log 'log_system' [ 1.664215@3] exFAT: Version 1.3.0 [ 1.668889@2] ff803000.serial: clock gate not found [ 1.672613@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.679754@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.694727@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.697343@2] console [ttyS0] enabled [ 1.697343@2] console [ttyS0] enabled [ 1.704553@1] bootconsole [aml_uart0] disabled [ 1.704553@1] bootconsole [aml_uart0] disabled [ 1.714077@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.720484@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.730738@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.740562@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.747081@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.759512@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.763554@3] irq = 20 [ 1.765892@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.774707@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.779141@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.784338@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.790853@3] meson-remote: Driver init [ 1.794784@3] meson-remote: remote_probe [ 1.798396@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.803457@3] meson-remote ff808040.rc: don't find the node [ 1.810006@3] meson-remote ff808040.rc: led_blink = 0 [ 1.815010@3] meson-remote ff808040.rc: don't find the node [ 1.821907@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.827552@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.833246@3] meson-remote ff808040.rc: custom_number = 3 [ 1.838568@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.844246@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.851407@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.857701@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.863847@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.869517@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.876675@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.882971@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.889116@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.894788@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.901946@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.908242@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.914371@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.921093@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.926872@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.932650@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.938342@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.944035@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.949986@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.955851@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.961457@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.966805@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.972152@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.978162@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.985140@3] meson-remote: IR XMP protocol handler initialized [ 1.990818@3] efusekeynum: 4 [ 1.993328@3] efusekeyname: mac offset: 0 size: 6 [ 1.999679@3] efusekeyname: mac_bt offset: 6 size: 6 [ 2.006063@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.012446@3] efusekeyname: usid offset: 18 size: 16 [ 2.019069@1] efuse efuse: probe OK! [ 2.024699@1] ge2d: ge2d_init_module [ 2.026396@1] [tsync_pcr_init]init success. [ 2.030953@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.037446@1] DI: di_module_init ok. [ 2.040577@1] dim:dim_module_init [ 2.043823@1] dim:dim_module_init finish [ 2.047507@1] dil:dil_init. [ 2.050411@1] dil:dil_init ok. [ 2.053288@1] vdin_drv_init: major 241 [ 2.057211@1] vdin_drv_init: vdin driver init done [ 2.061696@1] [viuin..]viuin_init_module viuin module init [ 2.067559@1] [viuin..]viuin_probe probe ok. [ 2.071610@1] amlvid:info: amlvideo_init called[ 2.075670@1] amlvid:info: amlvideo_create_instance called [ 2.081087@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.086440@0] amlvideo-000: V4L2 device registered as video10 [ 2.091912@0] amlvid:info: amlvideo_create_instance called [ 2.097307@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.102611@3] amlvideo-001: V4L2 device registered as video23 [ 2.108390@3] PPMGRDRV: warn: ppmgr module init func called [ 2.114552@3] videosync_create_instance dev_s ffffffc01c9fa000,dev_s->dev ffffffc01ca0b600 [ 2.121825@3] videosync_create_instance reg videosync.0 [ 2.127070@3] aml_vecm_init:module init [ 2.127071@0] videosync_thread started [ 2.134797@3] amdolby_vision_init:module init [ 2.139082@3] prime_sl module init [ 2.142698@3] amlogic mtd driver init [ 2.146438@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.151651@3] bl mode descrete [ 2.154563@3] fip_copies 4 [ 2.157246@3] fip_size 0x200000 [ 2.160350@3] nand_clk_ctrl 0xffe07000 [ 2.164058@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.169687@3] nand_clk_ctrl 0xffe07000 [ 2.173387@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.181704@3] plat->aml_nand_device ffffff800a778cf8 [ 2.186240@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.192215@3] NAND device id: c2 dc 90 a2 57 3 [ 2.196415@3] NAND device: Manufacturer ID: [ 2.200459@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.207117@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.212617@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.218138@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.224440@3] mtd->oobavail: 0x10 [ 2.228063@0] aml_nand_init 2119: plat-name:bootloader [ 2.232830@0] Creating 1 MTD partitions on "bootloader": [ 2.238067@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.245733@1] bootloader initialized ok [ 2.247290@1] plat->aml_nand_device ffffff800a778cf8 [ 2.252241@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.258258@1] NAND device id: c2 dc 90 a2 57 3 [ 2.262392@1] NAND device: Manufacturer ID: [ 2.266443@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.273109@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.278602@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.284120@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.290427@1] mtd->oobavail: 0x10 [ 2.293901@1] aml_nand_init 2119: plat-name:nandnormal [ 2.298813@1] bbt_start=20 [ 2.301456@1] env_start=24 [ 2.304128@1] key_start=32 [ 2.306793@1] dtb_start=40 [ 2.309475@1] ddr_start=44 [ 2.312150@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.318630@1] get_free_node 43: bitmap=0 [ 2.322070@1] get_free_node 55: bitmap=1 [ 2.326153@1] get_free_node 43: bitmap=1 [ 2.329831@1] get_free_node 55: bitmap=3 [ 2.333915@1] get_free_node 43: bitmap=3 [ 2.337593@1] get_free_node 55: bitmap=7 [ 2.341475@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.348114@1] nbbt free list: [ 2.351040@1] blockN=21, ec=-1, dirty_flag=0 [ 2.355273@1] blockN=22, ec=-1, dirty_flag=0 [ 2.359504@1] blockN=23, ec=-1, dirty_flag=0 [ 2.363727@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.369140@1] nbbt valid addr: 500000 [ 2.372353@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.377959@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.384200@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.390610@1] get_free_node 43: bitmap=7 [ 2.394087@1] get_free_node 55: bitmap=f [ 2.398171@1] get_free_node 43: bitmap=f [ 2.401849@1] get_free_node 55: bitmap=1f [ 2.406020@1] get_free_node 43: bitmap=1f [ 2.409784@1] get_free_node 55: bitmap=3f [ 2.413955@1] get_free_node 43: bitmap=3f [ 2.417719@1] get_free_node 55: bitmap=7f [ 2.421889@1] get_free_node 43: bitmap=7f [ 2.425653@1] get_free_node 55: bitmap=ff [ 2.429824@1] get_free_node 43: bitmap=ff [ 2.433589@1] get_free_node 55: bitmap=1ff [ 2.437846@1] get_free_node 43: bitmap=1ff [ 2.441697@1] get_free_node 55: bitmap=3ff [ 2.445756@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.452391@1] nenv free list: [ 2.455316@1] blockN=25, ec=-1, dirty_flag=0 [ 2.459550@1] blockN=26, ec=-1, dirty_flag=0 [ 2.463776@1] blockN=27, ec=-1, dirty_flag=0 [ 2.468002@1] blockN=28, ec=-1, dirty_flag=0 [ 2.472228@1] blockN=29, ec=-1, dirty_flag=0 [ 2.476454@1] blockN=30, ec=-1, dirty_flag=0 [ 2.480681@1] blockN=31, ec=-1, dirty_flag=0 [ 2.484907@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.496679@1] nenv valid addr: 610000 [ 2.496698@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.501128@1] get_free_node 43: bitmap=3ff [ 2.504978@1] get_free_node 55: bitmap=7ff [ 2.509235@1] get_free_node 43: bitmap=7ff [ 2.513086@1] get_free_node 55: bitmap=fff [ 2.517342@1] get_free_node 43: bitmap=fff [ 2.521193@1] get_free_node 55: bitmap=1fff [ 2.525536@1] get_free_node 43: bitmap=1fff [ 2.529473@1] get_free_node 55: bitmap=3fff [ 2.533816@1] get_free_node 43: bitmap=3fff [ 2.537754@1] get_free_node 55: bitmap=7fff [ 2.542095@1] get_free_node 43: bitmap=7fff [ 2.546033@1] get_free_node 55: bitmap=ffff [ 2.550376@1] get_free_node 43: bitmap=ffff [ 2.554313@1] get_free_node 55: bitmap=1ffff [ 2.558741@1] get_free_node 43: bitmap=1ffff [ 2.562766@1] get_free_node 55: bitmap=3ffff [ 2.566992@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.573632@1] nkey free list: [ 2.576565@1] blockN=32, ec=-1, dirty_flag=0 [ 2.580791@1] blockN=33, ec=-1, dirty_flag=0 [ 2.585017@1] blockN=34, ec=-1, dirty_flag=0 [ 2.589243@1] blockN=35, ec=-1, dirty_flag=0 [ 2.593470@1] blockN=36, ec=-1, dirty_flag=0 [ 2.597697@1] blockN=37, ec=-1, dirty_flag=0 [ 2.601922@1] blockN=38, ec=-1, dirty_flag=0 [ 2.606148@1] blockN=39, ec=-1, dirty_flag=0 [ 2.610375@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.615464@1] nkey valid addr: fffffffffffc0000 [ 2.619954@1] aml_nand_key_check 1251 NO key exist [ 2.624698@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.631313@1] get_free_node 43: bitmap=3ffff [ 2.635130@1] get_free_node 55: bitmap=7ffff [ 2.639567@1] get_free_node 43: bitmap=7ffff [ 2.643582@1] get_free_node 55: bitmap=fffff [ 2.648012@1] get_free_node 43: bitmap=fffff [ 2.652035@1] get_free_node 55: bitmap=1fffff [ 2.656348@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.662987@1] ndtb free list: [ 2.665920@1] blockN=41, ec=-1, dirty_flag=0 [ 2.670146@1] blockN=42, ec=-1, dirty_flag=0 [ 2.674372@1] blockN=43, ec=-1, dirty_flag=0 [ 2.678599@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.696629@1] ndtb valid addr: a00000 [ 2.696649@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.701082@1] get_free_node 43: bitmap=1fffff [ 2.705190@1] get_free_node 55: bitmap=3fffff [ 2.709706@1] get_free_node 43: bitmap=3fffff [ 2.713815@1] get_free_node 55: bitmap=7fffff [ 2.718128@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.724768@1] nddr free list: [ 2.727701@1] blockN=44, ec=-1, dirty_flag=0 [ 2.731927@1] blockN=45, ec=-1, dirty_flag=0 [ 2.736154@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.741242@1] nddr valid addr: fffffffffffc0000 [ 2.745728@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.750474@1] tpl: off 16777216, size 8388608 [ 2.816821@1] Creating 7 MTD partitions on "nandnormal": [ 2.816850@1] 0x000001000000-0x000001800000 : "tpl" [ 2.823888@0] 0x000001800000-0x000001a00000 : "misc" [ 2.827732@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.832637@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.839699@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.844379@0] 0x000003b00000-0x000015300000 : "system" [ 2.883592@0] 0x000015300000-0x000020000000 : "data" [ 2.906820@0] nandnormal initialized ok [ 2.906903@0] aml_ubootenv_init: register env chardev [ 2.910296@0] aml_ubootenv_init: register env chardev OK [ 2.915506@0] amlnf_dtb_init: register dtb cdev [ 2.920011@0] amlnf_dtb_init: register dtd cdev OK [ 2.924557@0] mtd_nand_probe 267 , err = 0 [ 2.929283@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.934883@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.941693@0] unifykey: storage in base: 0xffffffc005000000 [ 2.946635@0] unifykey: storage out base: 0xffffffc005040000 [ 2.952225@0] unifykey: storage block base: 0xffffffc005080000 [ 2.957996@0] unifykey: probe done! [ 2.961913@0] unifykey: no efuse-version set, use default value: -1 [ 2.967674@0] unifykey: key unify config unifykey-num is 6 [ 2.973152@0] unifykey: key unify fact unifykey-num is 6 [ 2.978357@0] unifykey: unifykey_devno: ee00000 [ 2.983105@0] unifykey: device unifykeys created ok [ 2.987757@0] unifykey: aml_unifykeys_init done! [ 2.992540@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.998859@0] amlkaraoke init success! [ 3.002022@0] sysled: module init [ 3.005406@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.010372@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.017475@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.024026@0] amlogic rfkill init [ 3.028686@1] dmc_monitor_probe [ 3.030420@1] page_trace_module_init, create sysfs failed [ 3.036075@1] defendkey defendkey: Reserved memory is not enough! [ 3.041621@1] defendkey: probe of defendkey failed with error -22 [ 3.048572@1] usbcore: registered new interface driver snd-usb-audio [ 3.057911@1] asoc debug: aml_audio_controller_probe-130 [ 3.059703@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.065007@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.072797@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.079993@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.086348@1] aml_tdm_platform_probe(), share en = 1[ 3.091084@1] No channel mask node Channel_Mask [ 3.095864@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.101393@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.109351@1] aml_tdm_platform_probe(), share en = 1[ 3.113855@1] No channel mask node Channel_Mask [ 3.118585@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.124158@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.132092@1] aml_tdm_platform_probe(), share en = 1[ 3.136625@1] No channel mask node Channel_Mask [ 3.142243@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.149281@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.157363@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.167288@3] Register vad [ 3.168454@3] check whether to update sound card init data [ 3.174254@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.181236@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.188547@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.194161@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.201850@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.209171@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.215034@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.221521@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.228555@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.234571@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.241444@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.247276@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.254006@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.261644@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.268813@1] snd_card_add_kcontrols card:ffffffc01ca2a018 [ 3.273881@1] effect_v2 is not init [ 3.277311@1] Failed to add VAD controls [ 3.281551@1] GACT probability NOT on [ 3.284829@1] Mirror/redirect action on [ 3.288601@1] u32 classifier [ 3.291440@1] Actions configured [ 3.294974@1] Netfilter messages via NETLINK v0.30. [ 3.300072@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.306263@1] ctnetlink v0.93: registering with nfnetlink. [ 3.311991@0] xt_time: kernel timezone is -0000 [ 3.315971@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.322146@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.327158@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.332726@0] Initializing XFRM netlink socket [ 3.337728@0] NET: Registered protocol family 10 [ 3.342893@0] mip6: Mobile IPv6 [ 3.344804@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.350598@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.357594@0] NET: Registered protocol family 17 [ 3.360930@0] NET: Registered protocol family 15 [ 3.365493@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.378610@0] Bluetooth: RFCOMM TTY layer initialized [ 3.383492@0] Bluetooth: RFCOMM socket layer initialized [ 3.388763@0] Bluetooth: RFCOMM ver 1.11 [ 3.392620@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.398045@0] Bluetooth: BNEP filters: protocol multicast [ 3.403401@0] Bluetooth: BNEP socket layer initialized [ 3.408486@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.414527@0] Bluetooth: HIDP socket layer initialized [ 3.419697@0] l2tp_core: L2TP core driver, V2.0 [ 3.424111@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.429011@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.434737@0] l2tp_netlink: L2TP netlink interface [ 3.439494@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.445516@0] l2tp_debugfs: L2TP debugfs support [ 3.450055@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.456658@0] NET: Registered protocol family 35 [ 3.461425@0] Key type dns_resolver registered [ 3.466587@0] Registered swp emulation handler [ 3.470002@0] Registered cp15_barrier emulation handler [ 3.475229@0] Registered setend emulation handler [ 3.479910@0] disable EAS feature [ 3.484008@0] registered taskstats version 1 [ 3.496802@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.002973@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.003030@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.011166@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.019648@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.026515@3] hub 1-0:1.0: USB hub found [ 4.029566@3] hub 1-0:1.0: 1 port detected [ 4.033898@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.039188@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.046981@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.055921@2] hub 2-0:1.0: USB hub found [ 4.059018@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.066353@2] usb usb2: Unsupported the hub [ 4.070863@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.078878@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.187446@2] dwc_otg: Core Release: 3.10a [ 4.187487@2] dwc_otg: Setting default values for core params [ 4.191652@2] dwc_otg: curmode: 0, host_only: 0 [ 4.208450@2] dwc_otg: Using Buffer DMA mode [ 4.208472@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.212358@2] dwc_otg: Working on port type = SLAVE [ 4.217190@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.224321@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.233746@2] gxbb_pm: enter meson_pm_probe! [ 4.233784@2] no vddio3v3_en pin[ 4.235451@2] pm-meson aml_pm: Can't get switch_clk81 [ 4.240465@2] gxbb_pm: meson_pm_probe done [ 4.2448³[ 4.251096@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.256551@2] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.465055@1] ubi0: attaching mtd6 [ 4.993426@1] ubi0: scanning is finished [ 4.997731@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.998015@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.005027@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.011911@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.018977@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.025191@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.032543@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.041752@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.051160@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.056908@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.101719@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.103703@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.113658@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.124435@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.130389@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.313131@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.374180@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.459473@2] ubi1: attaching mtd7 [ 5.785912@2] ubi1: scanning is finished [ 5.789920@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.790031@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.797053@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.803927@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.810994@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.817121@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.824448@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.833681@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.843006@3] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.852351@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.876125@1] UBIFS (ubi1:0): recovery needed [ 5.944844@1] UBIFS (ubi1:0): recovery completed [ 5.945003@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.951186@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.961185@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.971876@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.978605@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f31b0450 --- 0 [ 7.007294@0] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.018012@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.018050@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.025061@2] aml_tdm_open [ 7.026230@2] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC[ 7.037206@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.042762@0] cpufreq_interactive: no need to active hmp boost! ... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.123641@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.127209@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.133586@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.182302@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.688462@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21939 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 27 0f 40 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015884 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975143 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209459@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210273@0] CPU0: update cpu_capacity 1024 [ 0.214599@0] ASID allocator initialised with 32768 entries [ 0.252577@0] secmon: can't fine clear_range [ 0.253159@0] EFI services will not be available. [ 0.256006@0] Meson chip version = RevC (25:C - 43:0) [ 0.289929@1] Detected VIPT I-cache on CPU1 [ 0.289991@1] CPU1: update cpu_capacity 1024 [ 0.289993@1] CPU1: Booted secondary processor [410fd034] [ 0.317984@2] Detected VIPT I-cache on CPU2 [ 0.318038@2] CPU2: update cpu_capacity 1024 [ 0.318040@2] CPU2: Booted secondary processor [410fd034] [ 0.346049@3] Detected VIPT I-cache on CPU3 [ 0.346101@3] CPU3: update cpu_capacity 1024 [ 0.346103@3] CPU3: Booted secondary processor [410fd034] [ 0.346194@0] Brought up 4 CPUs [ 0.385412@0] SMP: Total of 4 processors activated. [ 0.390321@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396357@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407317@0] CPU: All CPU(s) started at EL2 [ 0.408097@0] alternatives: patching kernel code [ 0.413503@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420632@0] devtmpfs: initialized [ 0.436083@0] DMI not present or invalid. [ 0.436470@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444467@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451027@0] pinctrl core: initialized pinctrl subsystem [ 0.457581@0] NET: Registered protocol family 16 [ 0.477004@2] cpuidle: using governor menu [ 0.477154@2] register canvas platform driver [ 0.479867@2] register rdma platform driver [ 0.485317@2] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491692@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499178@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505234@2] clkmsr: clkmsr: driver init [ 0.508985@2] codec_mm_module_init [ 0.512434@2] media_configs_system_init [ 0.516574@2] aml_watch_point_probe, in, wp:2 [ 0.521216@2] pstore: using zlib compression [ 0.525499@2] console [pstore-1] enabled [ 0.528826@2] pstore: Registered ramoops as persistent store backend [ 0.535226@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549274@2] aml_iomap: amlogic iomap probe done [ 0.553969@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555875@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564858@2] audio_clocks: audio_clocks_probe done [ 0.573554@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573611@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578775@2] amlogic auge_snd_iomap probe done [ 0.853996@2] vgaarb: loaded [ 0.854388@2] SCSI subsystem initialized [ 0.855458@2] usbcore: registered new interface driver usbfs [ 0.860935@2] usbcore: registered new interface driver hub [ 0.866534@2] usbcore: registered new device driver usb [ 0.871777@2] Linux video capture interface: v2.00 [ 0.876530@2] pps_core: LinuxPPS API ver. 1 registered [ 0.881617@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.891001@2] PTP clock support registered [ 0.899350@2] dmi: Firmware registration failed. [ 0.903380@2] secmon: reserve_mem_size:0x300000 [ 0.904313@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.911268@2] secmon: get page:ffffffbf00140000, 5000 [ 0.916001@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924380@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.931116@2] fb: osd_init_module [ 0.935630@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.941170@2] Bluetooth: Core ver 2.22 [ 0.944305@2] NET: Registered protocol family 31 [ 0.948897@2] Bluetooth: HCI device and connection manager initialized [ 0.955463@2] Bluetooth: HCI socket layer initialized [ 0.960523@2] Bluetooth: L2CAP socket layer initialized [ 0.965813@2] Bluetooth: SCO socket layer initialized [ 0.974895@2] NetLabel: Initializing [ 0.974928@2] NetLabel: domain hash size = 128 [ 0.978986@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.984207@2] NetLabel: unlabeled traffic allowed by default [ 0.991676@1] clocksource: Switched to clocksource arch_sys_counter [ 1.092135@1] VFS: Disk quotas dquot_6.6.0 [ 1.092242@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.110952@1] NET: Registered protocol family 2 [ 1.111707@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.117184@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.123847@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.130432@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.136398@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.143050@1] NET: Registered protocol family 1 [ 1.147896@1] RPC: Registered named UNIX socket transport module. [ 1.153531@1] RPC: Registered udp transport module. [ 1.158414@1] RPC: Registered tcp transport module. [ 1.163314@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.171381@1] Unpacking initramfs... [ 1.272962@1] Freeing initrd memory: 2308K [ 1.274352@1] hw perfevents: clusterb_enabled = 0 [ 1.276212@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.280643@1] hw perfevents: cluster A irq = 7 [ 1.285200@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.294572@1] audit: initializing netlink subsys (disabled) [ 1.298721@1] audit: type=2000 audit(1.144:1): initialized [ 1.305374@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326273@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328302@1] NFS: Registering the id_resolver key type [ 1.331973@1] Key type id_resolver registered [ 1.336300@1] Key type id_legacy registered [ 1.340817@1] fuse init (API version 7.26) [ 1.349321@1] NET: Registered protocol family 38 [ 1.349369@1] Key type asymmetric registered [ 1.353539@1] Asymmetric key parser 'x509' registered [ 1.358890@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366277@1] io scheduler noop registered (default) [ 1.371207@1] io scheduler deadline registered [ 1.375914@1] io scheduler cfq registered [ 1.390499@3] random: fast init done [ 1.390567@3] random: crng init done [ 1.391093@1] Unable to detect cache hierarchy for CPU 0 [ 1.428686@1] loop: module loaded [ 1.429607@1] zram: Added device: zram0 [ 1.430583@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.437910@1] libphy: Fixed MDIO Bus: probed [ 1.441625@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.446416@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.453968@1] PPP generic driver version 2.4.2 [ 1.457549@1] PPP BSD Compression module registered [ 1.462178@1] PPP Deflate Compression module registered [ 1.467416@1] PPP MPPE Compression module registered [ 1.472386@1] NET: Registered protocol family 24 [ 1.477168@1] usbcore: registered new interface driver asix [ 1.482753@1] usbcore: registered new interface driver ax88179_178a [ 1.489023@1] usbcore: registered new interface driver cdc_ether [ 1.495037@1] usbcore: registered new interface driver net1080 [ 1.500918@1] usbcore: registered new interface driver cdc_subset [ 1.507028@1] usbcore: registered new interface driver zaurus [ 1.512829@1] usbcore: registered new interface driver cdc_ncm [ 1.519272@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.525348@1] ehci-pci: EHCI PCI platform driver [ 1.530077@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.536391@1] ohci-pci: OHCI PCI platform driver [ 1.541577@1] usbcore: registered new interface driver cdc_acm [ 1.546873@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.555191@1] usbcore: registered new interface driver usb-storage [ 1.561446@1] usbcore: registered new interface driver usbserial [ 1.567996@2] mousedev: PS/2 mouse device common for all mice [ 1.573493@2] usbcore: registered new interface driver xpad [ 1.578935@1] i2c /dev entries driver [ 1.582550@1] usbcore: registered new interface driver uvcvideo [ 1.588338@1] USB Video Class driver (1.1.1) [ 1.592615@1] md: linear personality registered for level -1 [ 1.598815@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.608463@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.614283@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.622045@3] usbcore: registered new interface driver usbhid [ 1.625980@3] usbhid: USB HID core driver [ 1.630222@0] ashmem: initialized [ 1.633686@0] logger: created 512K log 'log_main' [ 1.638236@0] logger: created 1K log 'log_events' [ 1.642939@0] logger: created 1K log 'log_radio' [ 1.647597@0] logger: created 16K log 'log_system' [ 1.652210@0] exFAT: Version 1.3.0 [ 1.656853@0] ff803000.serial: clock gate not found [ 1.660593@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.667739@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.682722@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.685322@0] console [ttyS0] enabled [ 1.685322@0] console [ttyS0] enabled [ 1.692544@3] bootconsole [aml_uart0] disabled [ 1.692544@3] bootconsole [aml_uart0] disabled [ 1.702033@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.708463@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.718742@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.728568@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.735076@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.747487@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.751565@3] irq = 20 [ 1.753912@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.762722@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.767124@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.772390@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.778809@3] meson-remote: Driver init [ 1.782773@3] meson-remote: remote_probe [ 1.786396@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.791463@3] meson-remote ff808040.rc: don't find the node [ 1.798009@3] meson-remote ff808040.rc: led_blink = 0 [ 1.803007@3] meson-remote ff808040.rc: don't find the node [ 1.809905@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.815544@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.821248@3] meson-remote ff808040.rc: custom_number = 3 [ 1.826561@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.832244@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.839400@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.845696@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.851844@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.857512@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.864669@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.870965@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.877110@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.882783@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.889941@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.896237@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.902365@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.909088@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.914866@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.920645@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.926337@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.932030@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.937981@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.943846@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.949456@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.954800@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.960147@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.966202@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.973130@1] meson-remote: IR XMP protocol handler initialized [ 1.978813@1] efusekeynum: 4 [ 1.981325@1] efusekeyname: mac offset: 0 size: 6 [ 1.987679@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.994054@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.000441@1] efusekeyname: usid offset: 18 size: 16 [ 2.007091@3] efuse efuse: probe OK! [ 2.012838@1] ge2d: ge2d_init_module [ 2.014405@1] [tsync_pcr_init]init success. [ 2.018937@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.025399@1] DI: di_module_init ok. [ 2.028537@1] dim:dim_module_init [ 2.031800@1] dim:dim_module_init finish [ 2.035439@1] dil:dil_init. [ 2.038405@1] dil:dil_init ok. [ 2.041310@1] vdin_drv_init: major 241 [ 2.045204@1] vdin_drv_init: vdin driver init done [ 2.049696@1] [viuin..]viuin_init_module viuin module init [ 2.055511@1] [viuin..]viuin_probe probe ok. [ 2.059616@1] amlvid:info: amlvideo_init called[ 2.063666@1] amlvid:info: amlvideo_create_instance called [ 2.069097@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.074449@0] amlvideo-000: V4L2 device registered as video10 [ 2.079890@0] amlvid:info: amlvideo_create_instance called [ 2.085303@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.090608@2] amlvideo-001: V4L2 device registered as video23 [ 2.096379@2] PPMGRDRV: warn: ppmgr module init func called [ 2.102590@3] videosync_create_instance dev_s ffffffc01c9a8400,dev_s->dev ffffffc01db61a80 [ 2.109815@3] videosync_create_instance reg videosync.0 [ 2.115072@3] aml_vecm_init:module init [ 2.115073@2] videosync_thread started [ 2.122805@3] amdolby_vision_init:module init [ 2.127069@3] prime_sl module init [ 2.130699@3] amlogic mtd driver init [ 2.134409@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.139653@3] bl mode descrete [ 2.142560@3] fip_copies 4 [ 2.145240@3] fip_size 0x200000 [ 2.148349@3] nand_clk_ctrl 0xffe07000 [ 2.152053@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.157688@3] nand_clk_ctrl 0xffe07000 [ 2.161383@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.169715@3] plat->aml_nand_device ffffff800a778cf8 [ 2.174241@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.180211@3] NAND device id: c2 dc 90 a2 57 3 [ 2.184406@3] NAND device: Manufacturer ID: [ 2.188453@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.195113@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.200612@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.206133@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.212435@3] mtd->oobavail: 0x10 [ 2.216062@1] aml_nand_init 2119: plat-name:bootloader [ 2.220816@1] Creating 1 MTD partitions on "bootloader": [ 2.226062@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.233754@2] bootloader initialized ok [ 2.235285@2] plat->aml_nand_device ffffff800a778cf8 [ 2.240226@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.246251@2] NAND device id: c2 dc 90 a2 57 3 [ 2.250385@2] NAND device: Manufacturer ID: [ 2.254437@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.261093@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.266600@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.272115@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.278421@2] mtd->oobavail: 0x10 [ 2.281902@2] aml_nand_init 2119: plat-name:nandnormal [ 2.286801@2] bbt_start=20 [ 2.289449@2] env_start=24 [ 2.292122@2] key_start=32 [ 2.294788@2] dtb_start=40 [ 2.297469@2] ddr_start=44 [ 2.300145@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.306621@2] get_free_node 43: bitmap=0 [ 2.310064@2] get_free_node 55: bitmap=1 [ 2.314147@2] get_free_node 43: bitmap=1 [ 2.317826@2] get_free_node 55: bitmap=3 [ 2.321910@2] get_free_node 43: bitmap=3 [ 2.325588@2] get_free_node 55: bitmap=7 [ 2.329469@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.336109@2] nbbt free list: [ 2.339034@2] blockN=21, ec=-1, dirty_flag=0 [ 2.343268@2] blockN=22, ec=-1, dirty_flag=0 [ 2.347495@2] blockN=23, ec=-1, dirty_flag=0 [ 2.351721@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.357130@2] nbbt valid addr: 500000 [ 2.360348@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.365954@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.372195@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.378605@2] get_free_node 43: bitmap=7 [ 2.382082@2] get_free_node 55: bitmap=f [ 2.386166@2] get_free_node 43: bitmap=f [ 2.389844@2] get_free_node 55: bitmap=1f [ 2.394015@2] get_free_node 43: bitmap=1f [ 2.397779@2] get_free_node 55: bitmap=3f [ 2.401949@2] get_free_node 43: bitmap=3f [ 2.405714@2] get_free_node 55: bitmap=7f [ 2.409884@2] get_free_node 43: bitmap=7f [ 2.413649@2] get_free_node 55: bitmap=ff [ 2.417820@2] get_free_node 43: bitmap=ff [ 2.421584@2] get_free_node 55: bitmap=1ff [ 2.425840@2] get_free_node 43: bitmap=1ff [ 2.429691@2] get_free_node 55: bitmap=3ff [ 2.433744@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.440385@2] nenv free list: [ 2.443311@2] blockN=25, ec=-1, dirty_flag=0 [ 2.447544@2] blockN=26, ec=-1, dirty_flag=0 [ 2.451771@2] blockN=27, ec=-1, dirty_flag=0 [ 2.455997@2] blockN=28, ec=-1, dirty_flag=0 [ 2.460223@2] blockN=29, ec=-1, dirty_flag=0 [ 2.464449@2] blockN=30, ec=-1, dirty_flag=0 [ 2.468676@2] blockN=31, ec=-1, dirty_flag=0 [ 2.472902@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.484649@2] nenv valid addr: 610000 [ 2.484668@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.489097@2] get_free_node 43: bitmap=3ff [ 2.492947@2] get_free_node 55: bitmap=7ff [ 2.497204@2] get_free_node 43: bitmap=7ff [ 2.501055@2] get_free_node 55: bitmap=fff [ 2.505311@2] get_free_node 43: bitmap=fff [ 2.509163@2] get_free_node 55: bitmap=1fff [ 2.513505@2] get_free_node 43: bitmap=1fff [ 2.517443@2] get_free_node 55: bitmap=3fff [ 2.521789@2] get_free_node 43: bitmap=3fff [ 2.525723@2] get_free_node 55: bitmap=7fff [ 2.530065@2] get_free_node 43: bitmap=7fff [ 2.534002@2] get_free_node 55: bitmap=ffff [ 2.538345@2] get_free_node 43: bitmap=ffff [ 2.542282@2] get_free_node 55: bitmap=1ffff [ 2.546711@2] get_free_node 43: bitmap=1ffff [ 2.550735@2] get_free_node 55: bitmap=3ffff [ 2.554961@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.561601@2] nkey free list: [ 2.564534@2] blockN=32, ec=-1, dirty_flag=0 [ 2.568760@2] blockN=33, ec=-1, dirty_flag=0 [ 2.572986@2] blockN=34, ec=-1, dirty_flag=0 [ 2.577212@2] blockN=35, ec=-1, dirty_flag=0 [ 2.581488@2] blockN=36, ec=-1, dirty_flag=0 [ 2.585666@2] blockN=37, ec=-1, dirty_flag=0 [ 2.589892@2] blockN=38, ec=-1, dirty_flag=0 [ 2.594118@2] blockN=39, ec=-1, dirty_flag=0 [ 2.598344@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.603433@2] nkey valid addr: fffffffffffc0000 [ 2.607919@2] aml_nand_key_check 1251 NO key exist [ 2.612662@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.619278@2] get_free_node 43: bitmap=3ffff [ 2.623099@2] get_free_node 55: bitmap=7ffff [ 2.627527@2] get_free_node 43: bitmap=7ffff [ 2.631550@2] get_free_node 55: bitmap=fffff [ 2.635984@2] get_free_node 43: bitmap=fffff [ 2.640004@2] get_free_node 55: bitmap=1fffff [ 2.644330@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.650957@2] ndtb free list: [ 2.653889@2] blockN=41, ec=-1, dirty_flag=0 [ 2.658115@2] blockN=42, ec=-1, dirty_flag=0 [ 2.662341@2] blockN=43, ec=-1, dirty_flag=0 [ 2.666568@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.684569@2] ndtb valid addr: a00000 [ 2.684588@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.689024@2] get_free_node 43: bitmap=1fffff [ 2.693134@2] get_free_node 55: bitmap=3fffff [ 2.697649@2] get_free_node 43: bitmap=3fffff [ 2.701758@2] get_free_node 55: bitmap=7fffff [ 2.706071@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.712711@2] nddr free list: [ 2.715636@2] blockN=44, ec=-1, dirty_flag=0 [ 2.719870@2] blockN=45, ec=-1, dirty_flag=0 [ 2.724097@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.729186@2] nddr valid addr: fffffffffffc0000 [ 2.733670@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.738417@2] tpl: off 16777216, size 8388608 [ 2.804777@2] Creating 7 MTD partitions on "nandnormal": [ 2.804807@2] 0x000001000000-0x000001800000 : "tpl" [ 2.812366@3] 0x000001800000-0x000001a00000 : "misc" [ 2.815739@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.820600@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.827535@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.832401@2] 0x000003b00000-0x000015300000 : "system" [ 2.871392@2] 0x000015300000-0x000020000000 : "data" [ 2.894685@2] nandnormal initialized ok [ 2.894767@2] aml_ubootenv_init: register env chardev [ 2.898126@2] aml_ubootenv_init: register env chardev OK [ 2.903358@2] amlnf_dtb_init: register dtb cdev [ 2.907893@2] amlnf_dtb_init: register dtd cdev OK [ 2.912425@2] mtd_nand_probe 267 , err = 0 [ 2.917162@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.922754@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.929582@2] unifykey: storage in base: 0xffffffc005000000 [ 2.934501@2] unifykey: storage out base: 0xffffffc005040000 [ 2.940092@2] unifykey: storage block base: 0xffffffc005080000 [ 2.945864@2] unifykey: probe done! [ 2.949781@2] unifykey: no efuse-version set, use default value: -1 [ 2.955538@2] unifykey: key unify config unifykey-num is 6 [ 2.961008@2] unifykey: key unify fact unifykey-num is 6 [ 2.966247@2] unifykey: unifykey_devno: ee00000 [ 2.971016@2] unifykey: device unifykeys created ok [ 2.975621@2] unifykey: aml_unifykeys_init done! [ 2.980425@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.986725@2] amlkaraoke init success! [ 2.989887@2] sysled: module init [ 2.993268@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.998236@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.005373@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.011893@2] amlogic rfkill init [ 3.016517@2] dmc_monitor_probe [ 3.018279@2] page_trace_module_init, create sysfs failed [ 3.027992@2] defendkey defendkey: Reserved memory is not enough! [ 3.029449@2] defendkey: probe of defendkey failed with error -22 [ 3.036462@2] usbcore: registered new interface driver snd-usb-audio [ 3.045749@2] asoc debug: aml_audio_controller_probe-130 [ 3.047507@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.052875@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.060658@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.067839@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.074208@2] aml_tdm_platform_probe(), share en = 1[ 3.078957@2] No channel mask node Channel_Mask [ 3.083758@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.089256@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.097266@2] aml_tdm_platform_probe(), share en = 1[ 3.101723@2] No channel mask node Channel_Mask [ 3.106468@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.112033@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.119983@2] aml_tdm_platform_probe(), share en = 1[ 3.124490@2] No channel mask node Channel_Mask [ 3.130095@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.137147@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.145227@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.155131@2] Register vad [ 3.156309@2] check whether to update sound card init data [ 3.162113@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.169104@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.176413@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.182026@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.189696@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.197027@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.202894@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.209387@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.216421@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.222436@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.229321@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.235139@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.241877@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.249694@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.256719@1] snd_card_add_kcontrols card:ffffffc01ca37018 [ 3.261779@1] effect_v2 is not init [ 3.265167@1] Failed to add VAD controls [ 3.269408@1] GACT probability NOT on [ 3.272701@1] Mirror/redirect action on [ 3.276476@1] u32 classifier [ 3.279297@1] Actions configured [ 3.282848@1] Netfilter messages via NETLINK v0.30. [ 3.287929@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.294115@1] ctnetlink v0.93: registering with nfnetlink. [ 3.299891@3] xt_time: kernel timezone is -0000 [ 3.303814@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.310042@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.315009@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.320597@3] Initializing XFRM netlink socket [ 3.325615@3] NET: Registered protocol family 10 [ 3.330779@3] mip6: Mobile IPv6 [ 3.332660@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.338468@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.345466@3] NET: Registered protocol family 17 [ 3.348805@3] NET: Registered protocol family 15 [ 3.353358@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.366460@3] Bluetooth: RFCOMM TTY layer initialized [ 3.371352@3] Bluetooth: RFCOMM socket layer initialized [ 3.376632@3] Bluetooth: RFCOMM ver 1.11 [ 3.380490@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.385915@3] Bluetooth: BNEP filters: protocol multicast [ 3.391265@3] Bluetooth: BNEP socket layer initialized [ 3.396351@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.402390@3] Bluetooth: HIDP socket layer initialized [ 3.407569@3] l2tp_core: L2TP core driver, V2.0 [ 3.411978@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.416876@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.422601@3] l2tp_netlink: L2TP netlink interface [ 3.427358@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.433379@3] l2tp_debugfs: L2TP debugfs support [ 3.437921@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.444522@3] NET: Registered protocol family 35 [ 3.449286@3] Key type dns_resolver registered [ 3.454458@3] Registered swp emulation handler [ 3.457873@3] Registered cp15_barrier emulation handler [ 3.463029@3] Registered setend emulation handler [ 3.467738@3] disable EAS feature [ 3.471835@0] registered taskstats version 1 [ 3.484606@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.990818@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.990878@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.999040@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.007498@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.014425@0] hub 1-0:1.0: USB hub found [ 4.017449@0] hub 1-0:1.0: 1 port detected [ 4.021775@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.027005@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.034822@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.043813@2] hub 2-0:1.0: USB hub found [ 4.046871@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.054184@2] usb usb2: Unsupported the hub [ 4.058640@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.066716@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.175292@3] dwc_otg: Core Release: 3.10a [ 4.175330@3] dwc_otg: Setting default values for core params [ 4.179492@3] dwc_otg: curmode: 0, host_only: 0 [ 4.196330@3] dwc_otg: Using Buffer DMA mode [ 4.196354@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.200232@3] dwc_otg: Working on port type = SLAVE [ 4.205065@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.212095@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.221628@3] gxbb_pm: enter meson_pm_probe! [ 4.221666@3] no vddio3v3_en pin[ 4.223304@3] pm-meson aml_pm: Can't get switch_clk81 [ 4.228377@3] gxbb_pm: meson_pm_probe done [ 4.23272W 4.239003@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.244430@3] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.453753@1] ubi0: attaching mtd6 [ 4.981874@1] ubi0: scanning is finished [ 4.986084@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.986373@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.993407@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.000270@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.007334@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.013548@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.020876@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.030108@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.039516@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.045190@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.089976@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.091940@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.101917@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.112691@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.118642@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301313@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.362319@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.446120@0] ubi1: attaching mtd7 [ 5.772864@0] ubi1: scanning is finished [ 5.776862@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776974@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783982@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790870@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797936@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.804063@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.811391@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.820624@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829946@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.839334@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.863039@2] UBIFS (ubi1:0): recovery needed [ 5.932420@2] UBIFS (ubi1:0): recovery completed [ 5.932577@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.938754@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.948755@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.959448@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.966178@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll Debug FS mount OK !!! [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2a6f450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.997907@1] aml_tdm_open [ 7.007516@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.007554@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.014587@1] aml_tdm_open [ 7.015792@1] Not init audio effects Opened TCP tuning[ 7.021694@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.026493@2] cpufreq_interactive: no need to active hmp boost! interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.114508@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.118193@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.124607@2] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.173240@2] asoc-aml-card auge_sound: tdm playback enable [ 8.607917@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.310376@3] asoc-aml-card auge_sound: tdm playback stop [ 14.310582@3] asoc-aml-card auge_sound: tdm capture stop [ 14.315761@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.308376@2] mtd_nand_reboot_notifier 35 [ 16.308638@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.316840@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.320212@2] usb usb2: USB disconnect, device number 1 [ 16.329469@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.330889@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.336055@3] usb usb1: USB disconnect, device number 1 [ 16.341998@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.363689@0] reboot: Restarting system [ 16.363809@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21796 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 35 24 0a 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015877 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1973708 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016840@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106553@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209556@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210370@0] CPU0: update cpu_capacity 1024 [ 0.214695@0] ASID allocator initialised with 32768 entries [ 0.252674@0] secmon: can't fine clear_range [ 0.253266@0] EFI services will not be available. [ 0.256099@0] Meson chip version = RevC (25:C - 43:0) [ 0.290041@1] Detected VIPT I-cache on CPU1 [ 0.290102@1] CPU1: update cpu_capacity 1024 [ 0.290104@1] CPU1: Booted secondary processor [410fd034] [ 0.318092@2] Detected VIPT I-cache on CPU2 [ 0.318145@2] CPU2: update cpu_capacity 1024 [ 0.318147@2] CPU2: Booted secondary processor [410fd034] [ 0.346144@3] Detected VIPT I-cache on CPU3 [ 0.346192@3] CPU3: update cpu_capacity 1024 [ 0.346195@3] CPU3: Booted secondary processor [410fd034] [ 0.346284@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390417@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407409@0] CPU: All CPU(s) started at EL2 [ 0.408192@0] alternatives: patching kernel code [ 0.413596@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420730@0] devtmpfs: initialized [ 0.436177@0] DMI not present or invalid. [ 0.436575@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444562@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451124@0] pinctrl core: initialized pinctrl subsystem [ 0.457729@0] NET: Registered protocol family 16 [ 0.477053@0] cpuidle: using governor menu [ 0.477199@0] register canvas platform driver [ 0.479923@0] register rdma platform driver [ 0.485378@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491739@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499217@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505339@0] clkmsr: clkmsr: driver init [ 0.509056@0] codec_mm_module_init [ 0.512492@0] media_configs_system_init [ 0.516629@0] aml_watch_point_probe, in, wp:2 [ 0.522140@0] pstore: using zlib compression [ 0.525549@0] console [pstore-1] enabled [ 0.528877@0] pstore: Registered ramoops as persistent store backend [ 0.535287@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549313@0] aml_iomap: amlogic iomap probe done [ 0.553991@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555910@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564866@0] audio_clocks: audio_clocks_probe done [ 0.573522@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573579@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578755@0] amlogic auge_snd_iomap probe done [ 0.854510@0] vgaarb: loaded [ 0.854904@0] SCSI subsystem initialized [ 0.856026@0] usbcore: registered new interface driver usbfs [ 0.861514@0] usbcore: registered new interface driver hub [ 0.867027@0] usbcore: registered new device driver usb [ 0.872313@0] Linux video capture interface: v2.00 [ 0.877056@0] pps_core: LinuxPPS API ver. 1 registered [ 0.882149@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.891518@0] PTP clock support registered [ 0.899853@0] dmi: Firmware registration failed. [ 0.900654@0] secmon: reserve_mem_size:0x300000 [ 0.904863@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.911783@0] secmon: get page:ffffffbf00140000, 5000 [ 0.916504@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924895@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.931638@0] fb: osd_init_module [ 0.936091@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.941718@0] Bluetooth: Core ver 2.22 [ 0.944814@0] NET: Registered protocol family 31 [ 0.949421@0] Bluetooth: HCI device and connection manager initialized [ 0.955973@0] Bluetooth: HCI socket layer initialized [ 0.961038@0] Bluetooth: L2CAP socket layer initialized [ 0.966359@0] Bluetooth: SCO socket layer initialized [ 0.971894@0] NetLabel: Initializing [ 0.974939@0] NetLabel: domain hash size = 128 [ 0.979582@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.984747@0] NetLabel: unlabeled traffic allowed by default [ 0.992165@1] clocksource: Switched to clocksource arch_sys_counter [ 1.092651@1] VFS: Disk quotas dquot_6.6.0 [ 1.092756@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.111915@1] NET: Registered protocol family 2 [ 1.112701@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.118180@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.124804@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.131392@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.137370@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.144038@1] NET: Registered protocol family 1 [ 1.148820@1] RPC: Registered named UNIX socket transport module. [ 1.154501@1] RPC: Registered udp transport module. [ 1.159376@1] RPC: Registered tcp transport module. [ 1.164280@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.172424@1] Unpacking initramfs... [ 1.273869@1] Freeing initrd memory: 2308K [ 1.275264@1] hw perfevents: clusterb_enabled = 0 [ 1.277122@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.281555@1] hw perfevents: cluster A irq = 7 [ 1.286123@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.295488@1] audit: initializing netlink subsys (disabled) [ 1.299633@1] audit: type=2000 audit(1.064:1): initialized [ 1.306286@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.323162@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.329153@1] NFS: Registering the id_resolver key type [ 1.329215@1] Key type id_resolver registered [ 1.333188@1] Key type id_legacy registered [ 1.337682@1] fuse init (API version 7.26) [ 1.346411@1] NET: Registered protocol family 38 [ 1.346455@1] Key type asymmetric registered [ 1.350423@1] Asymmetric key parser 'x509' registered [ 1.355766@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.363130@1] io scheduler noop registered (default) [ 1.368115@1] io scheduler deadline registered [ 1.372761@1] io scheduler cfq registered [ 1.387329@0] random: fast init done [ 1.387397@0] random: crng init done [ 1.388869@1] Unable to detect cache hierarchy for CPU 0 [ 1.426104@1] loop: module loaded [ 1.431087@1] zram: Added device: zram0 [ 1.431468@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.437149@1] libphy: Fixed MDIO Bus: probed [ 1.440771@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.445493@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.453081@1] PPP generic driver version 2.4.2 [ 1.456626@1] PPP BSD Compression module registered [ 1.461244@1] PPP Deflate Compression module registered [ 1.466487@1] PPP MPPE Compression module registered [ 1.471460@1] NET: Registered protocol family 24 [ 1.476238@1] usbcore: registered new interface driver asix [ 1.481811@1] usbcore: registered new interface driver ax88179_178a [ 1.488079@1] usbcore: registered new interface driver cdc_ether [ 1.494128@1] usbcore: registered new interface driver net1080 [ 1.499985@1] usbcore: registered new interface driver cdc_subset [ 1.506103@1] usbcore: registered new interface driver zaurus [ 1.511901@1] usbcore: registered new interface driver cdc_ncm [ 1.518349@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.524423@1] ehci-pci: EHCI PCI platform driver [ 1.529147@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.535464@1] ohci-pci: OHCI PCI platform driver [ 1.540663@1] usbcore: registered new interface driver cdc_acm [ 1.545939@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.554258@1] usbcore: registered new interface driver usb-storage [ 1.560515@1] usbcore: registered new interface driver usbserial [ 1.567029@2] mousedev: PS/2 mouse device common for all mice [ 1.572654@2] usbcore: registered new interface driver xpad [ 1.578046@1] i2c /dev entries driver [ 1.581622@1] usbcore: registered new interface driver uvcvideo [ 1.587413@1] USB Video Class driver (1.1.1) [ 1.591707@1] md: linear personality registered for level -1 [ 1.597877@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.607544@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.613361@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.621170@0] usbcore: registered new interface driver usbhid [ 1.625060@0] usbhid: USB HID core driver [ 1.629287@0] ashmem: initialized [ 1.632757@0] logger: created 512K log 'log_main' [ 1.637310@3] logger: created 1K log 'log_events' [ 1.642077@0] logger: created 1K log 'log_radio' [ 1.646689@3] logger: created 16K log 'log_system' [ 1.651286@3] exFAT: Version 1.3.0 [ 1.655974@0] ff803000.serial: clock gate not found [ 1.659661@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.666818@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.681795@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.684393@0] console [ttyS0] enabled [ 1.684393@0] console [ttyS0] enabled [ 1.691590@0] bootconsole [aml_uart0] disabled [ 1.691590@0] bootconsole [aml_uart0] disabled [ 1.701072@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.707541@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.717812@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.727627@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.734142@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.746573@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.750655@1] irq = 20 [ 1.752978@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.761752@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.766206@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.771434@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.777891@1] meson-remote: Driver init [ 1.781847@1] meson-remote: remote_probe [ 1.785459@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.790528@1] meson-remote ff808040.rc: don't find the node [ 1.797075@1] meson-remote ff808040.rc: led_blink = 0 [ 1.802073@1] meson-remote ff808040.rc: don't find the node [ 1.808976@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.814614@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.820318@1] meson-remote ff808040.rc: custom_number = 3 [ 1.825632@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.831317@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.838471@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.844771@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.850919@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.856585@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.863742@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.870038@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.876186@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.881855@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.889013@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.895309@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.901438@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.908161@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.913938@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.919717@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.925410@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.931102@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.937053@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.942918@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.948525@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.953872@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.959219@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.965321@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.972274@1] meson-remote: IR XMP protocol handler initialized [ 1.977866@1] efusekeynum: 4 [ 1.980396@1] efusekeyname: mac offset: 0 size: 6 [ 1.986745@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.993131@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.999507@1] efusekeyname: usid offset: 18 size: 16 [ 2.006160@3] efuse efuse: probe OK! [ 2.011736@1] ge2d: ge2d_init_module [ 2.013535@1] [tsync_pcr_init]init success. [ 2.018028@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.024537@3] DI: di_module_init ok. [ 2.027564@3] dim:dim_module_init [ 2.030949@3] dim:dim_module_init finish [ 2.034537@3] dil:dil_init. [ 2.037504@3] dil:dil_init ok. [ 2.040362@3] vdin_drv_init: major 241 [ 2.044279@3] vdin_drv_init: vdin driver init done [ 2.048767@3] [viuin..]viuin_init_module viuin module init [ 2.054590@3] [viuin..]viuin_probe probe ok. [ 2.058675@3] amlvid:info: amlvideo_init called[ 2.062738@3] amlvid:info: amlvideo_create_instance called [ 2.068156@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.073510@1] amlvideo-000: V4L2 device registered as video10 [ 2.078961@1] amlvid:info: amlvideo_create_instance called [ 2.084381@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.089678@0] amlvideo-001: V4L2 device registered as video23 [ 2.095455@0] PPMGRDRV: warn: ppmgr module init func called [ 2.101666@0] videosync_create_instance dev_s ffffffc01c9c4000,dev_s->dev ffffffc01c98fa00 [ 2.108893@0] videosync_create_instance reg videosync.0 [ 2.114130@0] aml_vecm_init:module init [ 2.114132@1] videosync_thread started [ 2.121900@0] amdolby_vision_init:module init [ 2.126149@0] prime_sl module init [ 2.129770@0] amlogic mtd driver init [ 2.133494@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.138717@0] bl mode descrete [ 2.141648@0] fip_copies 4 [ 2.144312@0] fip_size 0x200000 [ 2.147409@0] nand_clk_ctrl 0xffe07000 [ 2.151129@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.156756@0] nand_clk_ctrl 0xffe07000 [ 2.160458@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.168784@0] plat->aml_nand_device ffffff800a778cf8 [ 2.173306@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.179282@0] NAND device id: c2 dc 90 a2 57 3 [ 2.183476@0] NAND device: Manufacturer ID: [ 2.187525@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.194184@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.199684@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.205206@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.211523@0] mtd->oobavail: 0x10 [ 2.215144@1] aml_nand_init 2119: plat-name:bootloader [ 2.219899@1] Creating 1 MTD partitions on "bootloader": [ 2.225141@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.232626@1] bootloader initialized ok [ 2.234357@1] plat->aml_nand_device ffffff800a778cf8 [ 2.239299@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.245321@1] NAND device id: c2 dc 90 a2 57 3 [ 2.249479@1] NAND device: Manufacturer ID: [ 2.253508@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.260171@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.265672@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.271189@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.277490@1] mtd->oobavail: 0x10 [ 2.280980@1] aml_nand_init 2119: plat-name:nandnormal [ 2.285888@1] bbt_start=20 [ 2.288522@1] env_start=24 [ 2.291186@1] key_start=32 [ 2.293872@1] dtb_start=40 [ 2.296542@1] ddr_start=44 [ 2.299280@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.305707@1] get_free_node 43: bitmap=0 [ 2.309137@1] get_free_node 55: bitmap=1 [ 2.313220@1] get_free_node 43: bitmap=1 [ 2.316898@1] get_free_node 55: bitmap=3 [ 2.320982@1] get_free_node 43: bitmap=3 [ 2.324660@1] get_free_node 55: bitmap=7 [ 2.328542@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.335181@1] nbbt free list: [ 2.338114@1] blockN=21, ec=-1, dirty_flag=0 [ 2.342341@1] blockN=22, ec=-1, dirty_flag=0 [ 2.346567@1] blockN=23, ec=-1, dirty_flag=0 [ 2.350793@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.356202@1] nbbt valid addr: 500000 [ 2.359412@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.365025@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.371268@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.377678@1] get_free_node 43: bitmap=7 [ 2.381154@1] get_free_node 55: bitmap=f [ 2.385238@1] get_free_node 43: bitmap=f [ 2.388917@1] get_free_node 55: bitmap=1f [ 2.393087@1] get_free_node 43: bitmap=1f [ 2.396851@1] get_free_node 55: bitmap=3f [ 2.401021@1] get_free_node 43: bitmap=3f [ 2.404787@1] get_free_node 55: bitmap=7f [ 2.408956@1] get_free_node 43: bitmap=7f [ 2.412721@1] get_free_node 55: bitmap=ff [ 2.416891@1] get_free_node 43: bitmap=ff [ 2.420656@1] get_free_node 55: bitmap=1ff [ 2.424913@1] get_free_node 43: bitmap=1ff [ 2.428770@1] get_free_node 55: bitmap=3ff [ 2.432818@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.439457@1] nenv free list: [ 2.442390@1] blockN=25, ec=-1, dirty_flag=0 [ 2.446617@1] blockN=26, ec=-1, dirty_flag=0 [ 2.450843@1] blockN=27, ec=-1, dirty_flag=0 [ 2.455069@1] blockN=28, ec=-1, dirty_flag=0 [ 2.459295@1] blockN=29, ec=-1, dirty_flag=0 [ 2.463521@1] blockN=30, ec=-1, dirty_flag=0 [ 2.467748@1] blockN=31, ec=-1, dirty_flag=0 [ 2.471974@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.483716@1] nenv valid addr: 610000 [ 2.483735@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.488182@1] get_free_node 43: bitmap=3ff [ 2.492011@1] get_free_node 55: bitmap=7ff [ 2.496299@1] get_free_node 43: bitmap=7ff [ 2.500118@1] get_free_node 55: bitmap=fff [ 2.504384@1] get_free_node 43: bitmap=fff [ 2.508235@1] get_free_node 55: bitmap=1fff [ 2.512577@1] get_free_node 43: bitmap=1fff [ 2.516515@1] get_free_node 55: bitmap=3fff [ 2.520857@1] get_free_node 43: bitmap=3fff [ 2.524795@1] get_free_node 55: bitmap=7fff [ 2.529137@1] get_free_node 43: bitmap=7fff [ 2.533075@1] get_free_node 55: bitmap=ffff [ 2.537417@1] get_free_node 43: bitmap=ffff [ 2.541355@1] get_free_node 55: bitmap=1ffff [ 2.545783@1] get_free_node 43: bitmap=1ffff [ 2.549807@1] get_free_node 55: bitmap=3ffff [ 2.554033@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.560673@1] nkey free list: [ 2.563598@1] blockN=32, ec=-1, dirty_flag=0 [ 2.567833@1] blockN=33, ec=-1, dirty_flag=0 [ 2.572058@1] blockN=34, ec=-1, dirty_flag=0 [ 2.576285@1] blockN=35, ec=-1, dirty_flag=0 [ 2.580511@1] blockN=36, ec=-1, dirty_flag=0 [ 2.584737@1] blockN=37, ec=-1, dirty_flag=0 [ 2.588964@1] blockN=38, ec=-1, dirty_flag=0 [ 2.593190@1] blockN=39, ec=-1, dirty_flag=0 [ 2.597416@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.602505@1] nkey valid addr: fffffffffffc0000 [ 2.606989@1] aml_nand_key_check 1251 NO key exist [ 2.611735@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.618349@1] get_free_node 43: bitmap=3ffff [ 2.622171@1] get_free_node 55: bitmap=7ffff [ 2.626599@1] get_free_node 43: bitmap=7ffff [ 2.630623@1] get_free_node 55: bitmap=fffff [ 2.635072@1] get_free_node 43: bitmap=fffff [ 2.639076@1] get_free_node 55: bitmap=1fffff [ 2.643388@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.650028@1] ndtb free list: [ 2.652961@1] blockN=41, ec=-1, dirty_flag=0 [ 2.657187@1] blockN=42, ec=-1, dirty_flag=0 [ 2.661413@1] blockN=43, ec=-1, dirty_flag=0 [ 2.665640@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.683635@1] ndtb valid addr: a00000 [ 2.683655@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.688087@1] get_free_node 43: bitmap=1fffff [ 2.692198@1] get_free_node 55: bitmap=3fffff [ 2.696712@1] get_free_node 43: bitmap=3fffff [ 2.700822@1] get_free_node 55: bitmap=7fffff [ 2.705134@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.711775@1] nddr free list: [ 2.714707@1] blockN=44, ec=-1, dirty_flag=0 [ 2.718934@1] blockN=45, ec=-1, dirty_flag=0 [ 2.723160@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.728249@1] nddr valid addr: fffffffffffc0000 [ 2.732735@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.737480@1] tpl: off 16777216, size 8388608 [ 2.803753@1] Creating 7 MTD partitions on "nandnormal": [ 2.803784@1] 0x000001000000-0x000001800000 : "tpl" [ 2.810823@2] 0x000001800000-0x000001a00000 : "misc" [ 2.814587@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.819516@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.826556@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.831352@3] 0x000003b00000-0x000015300000 : "system" [ 2.870520@3] 0x000015300000-0x000020000000 : "data" [ 2.893740@3] nandnormal initialized ok [ 2.893824@3] aml_ubootenv_init: register env chardev [ 2.897201@3] aml_ubootenv_init: register env chardev OK [ 2.902412@3] amlnf_dtb_init: register dtb cdev [ 2.906959@3] amlnf_dtb_init: register dtd cdev OK [ 2.911482@3] mtd_nand_probe 267 , err = 0 [ 2.916204@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.921804@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.928644@3] unifykey: storage in base: 0xffffffc005000000 [ 2.933559@3] unifykey: storage out base: 0xffffffc005040000 [ 2.939141@3] unifykey: storage block base: 0xffffffc005080000 [ 2.944921@3] unifykey: probe done! [ 2.948822@3] unifykey: no efuse-version set, use default value: -1 [ 2.954600@3] unifykey: key unify config unifykey-num is 6 [ 2.960054@3] unifykey: key unify fact unifykey-num is 6 [ 2.965276@3] unifykey: unifykey_devno: ee00000 [ 2.970048@3] unifykey: device unifykeys created ok [ 2.974674@3] unifykey: aml_unifykeys_init done! [ 2.979449@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.985780@3] amlkaraoke init success! [ 2.988945@3] sysled: module init [ 2.992311@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.997290@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.004436@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.010945@3] amlogic rfkill init [ 3.015600@3] dmc_monitor_probe [ 3.017386@3] page_trace_module_init, create sysfs failed [ 3.027022@3] defendkey defendkey: Reserved memory is not enough! [ 3.028529@3] defendkey: probe of defendkey failed with error -22 [ 3.035526@3] usbcore: registered new interface driver snd-usb-audio [ 3.044821@3] asoc debug: aml_audio_controller_probe-130 [ 3.046568@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.051970@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.059751@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.066922@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.073350@0] aml_tdm_platform_probe(), share en = 1[ 3.078005@0] No channel mask node Channel_Mask [ 3.082790@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.088319@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.096303@0] aml_tdm_platform_probe(), share en = 1[ 3.100779@0] No channel mask node Channel_Mask [ 3.105506@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.111081@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.119012@0] aml_tdm_platform_probe(), share en = 1[ 3.123545@0] No channel mask node Channel_Mask [ 3.129168@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.136208@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.144322@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.154279@3] Register vad [ 3.155346@3] check whether to update sound card init data [ 3.161205@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.168170@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.175467@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.181081@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.188773@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.196082@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.201951@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.208441@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.215603@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.221494@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.228453@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.234202@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.240922@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.248687@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.255735@0] snd_card_add_kcontrols card:ffffffc01c99f018 [ 3.260802@0] effect_v2 is not init [ 3.264251@0] Failed to add VAD controls [ 3.268447@0] GACT probability NOT on [ 3.271727@0] Mirror/redirect action on [ 3.275546@0] u32 classifier [ 3.278369@0] Actions configured [ 3.281907@0] Netfilter messages via NETLINK v0.30. [ 3.287001@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.293178@0] ctnetlink v0.93: registering with nfnetlink. [ 3.298888@1] xt_time: kernel timezone is -0000 [ 3.302889@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.309080@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.314078@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.319646@1] Initializing XFRM netlink socket [ 3.324634@1] NET: Registered protocol family 10 [ 3.330056@1] mip6: Mobile IPv6 [ 3.331687@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.337519@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.344582@1] NET: Registered protocol family 17 [ 3.347815@1] NET: Registered protocol family 15 [ 3.352432@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.365521@1] Bluetooth: RFCOMM TTY layer initialized [ 3.370412@1] Bluetooth: RFCOMM socket layer initialized [ 3.375689@1] Bluetooth: RFCOMM ver 1.11 [ 3.379543@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.384970@1] Bluetooth: BNEP filters: protocol multicast [ 3.390320@1] Bluetooth: BNEP socket layer initialized [ 3.395420@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.401446@1] Bluetooth: HIDP socket layer initialized [ 3.406634@1] l2tp_core: L2TP core driver, V2.0 [ 3.411036@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.415931@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.421657@1] l2tp_netlink: L2TP netlink interface [ 3.426431@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.432441@1] l2tp_debugfs: L2TP debugfs support [ 3.436976@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.443579@1] NET: Registered protocol family 35 [ 3.448345@1] Key type dns_resolver registered [ 3.453514@1] Registered swp emulation handler [ 3.456922@1] Registered cp15_barrier emulation handler [ 3.462084@1] Registered setend emulation handler [ 3.466791@1] disable EAS feature [ 3.470855@0] registered taskstats version 1 [ 3.483691@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.989944@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.990019@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.998158@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.006617@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.013576@3] hub 1-0:1.0: USB hub found [ 4.016539@3] hub 1-0:1.0: 1 port detected [ 4.020867@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.026129@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.033945@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.042950@0] hub 2-0:1.0: USB hub found [ 4.046027@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.053306@0] usb usb2: Unsupported the hub [ 4.057834@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.065843@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.174560@0] dwc_otg: Core Release: 3.10a [ 4.174602@0] dwc_otg: Setting default values for core params [ 4.178765@0] dwc_otg: curmode: 0, host_only: 0 [ 4.195557@0] dwc_otg: Using Buffer DMA mode [ 4.195580@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.199459@0] dwc_otg: Working on port type = SLAVE [ 4.204292@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.211351@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.220910@0] gxbb_pm: enter meson_pm_probe! [ 4.220949@0] no vddio3v3_en pin[ 4.222592@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.227647@0] gxbb_pm: meson_pm_probe done [ 4.23200Y 4.238287@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.243679@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.453123@3] ubi0: attaching mtd6 [ 4.981154@3] ubi0: scanning is finished [ 4.985345@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.985634@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.992641@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.999530@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.006630@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.012810@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.020138@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.029366@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.038837@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.044449@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.089264@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.091197@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.101249@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.111988@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.117940@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.297811@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.355650@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.442072@3] ubi1: attaching mtd7 [ 5.768252@3] ubi1: scanning is finished [ 5.772209@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.772323@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.779318@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.786217@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.793291@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.799411@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.806739@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.815970@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.825347@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.834594@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.858258@1] UBIFS (ubi1:0): recovery needed [ 5.929253@0] UBIFS (ubi1:0): recovery completed [ 5.929411@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.935586@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.945587@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.956278@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.963056@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2efd450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.992593@3] aml_tdm_open [ 7.001609@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.001649@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.008719@3] aml_tdm_open [ 7.009829@3] Not init audio effects [ 7.015014@2] cpufreq_interactive: cpufreq_hmp_boost_start() Opened TCP tuning interface on p[ 7.024298@1] cpufreq_interactive: no need to active hmp boost! ort 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.110235@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.113923@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.120241@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.168925@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.692418@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22022 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015889 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976157 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021110@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106554@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209446@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210256@0] CPU0: update cpu_capacity 1024 [ 0.214583@0] ASID allocator initialised with 32768 entries [ 0.252562@0] secmon: can't fine clear_range [ 0.253149@0] EFI services will not be available. [ 0.255987@0] Meson chip version = RevC (25:C - 43:0) [ 0.289914@1] Detected VIPT I-cache on CPU1 [ 0.289975@1] CPU1: update cpu_capacity 1024 [ 0.289977@1] CPU1: Booted secondary processor [410fd034] [ 0.317970@2] Detected VIPT I-cache on CPU2 [ 0.318021@2] CPU2: update cpu_capacity 1024 [ 0.318024@2] CPU2: Booted secondary processor [410fd034] [ 0.346038@3] Detected VIPT I-cache on CPU3 [ 0.346088@3] CPU3: update cpu_capacity 1024 [ 0.346091@3] CPU3: Booted secondary processor [410fd034] [ 0.346184@0] Brought up 4 CPUs [ 0.385403@0] SMP: Total of 4 processors activated. [ 0.390313@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396348@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407312@0] CPU: All CPU(s) started at EL2 [ 0.408089@0] alternatives: patching kernel code [ 0.413493@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420626@0] devtmpfs: initialized [ 0.436073@0] DMI not present or invalid. [ 0.436456@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444457@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451016@0] pinctrl core: initialized pinctrl subsystem [ 0.457564@0] NET: Registered protocol family 16 [ 0.480958@0] cpuidle: using governor menu [ 0.481107@0] register canvas platform driver [ 0.483825@0] register rdma platform driver [ 0.489284@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495648@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503130@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509265@0] clkmsr: clkmsr: driver init [ 0.512961@0] codec_mm_module_init [ 0.516388@0] media_configs_system_init [ 0.520530@0] aml_watch_point_probe, in, wp:2 [ 0.525189@0] pstore: using zlib compression [ 0.529451@0] console [pstore-1] enabled [ 0.532780@0] pstore: Registered ramoops as persistent store backend [ 0.539195@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553225@0] aml_iomap: amlogic iomap probe done [ 0.557926@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559822@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568814@0] audio_clocks: audio_clocks_probe done [ 0.577477@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577534@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582711@0] amlogic auge_snd_iomap probe done [ 0.865787@0] vgaarb: loaded [ 0.866189@0] SCSI subsystem initialized [ 0.867301@0] usbcore: registered new interface driver usbfs [ 0.872778@0] usbcore: registered new interface driver hub [ 0.878308@0] usbcore: registered new device driver usb [ 0.883590@0] Linux video capture interface: v2.00 [ 0.888333@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893424@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902803@0] PTP clock support registered [ 0.907293@0] dmi: Firmware registration failed. [ 0.911981@0] secmon: reserve_mem_size:0x300000 [ 0.916145@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.923030@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927789@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.936175@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942915@0] fb: osd_init_module [ 0.947382@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.952994@0] Bluetooth: Core ver 2.22 [ 0.956096@0] NET: Registered protocol family 31 [ 0.960699@0] Bluetooth: HCI device and connection manager initialized [ 0.967251@0] Bluetooth: HCI socket layer initialized [ 0.972317@0] Bluetooth: L2CAP socket layer initialized [ 0.977638@0] Bluetooth: SCO socket layer initialized [ 0.986715@0] NetLabel: Initializing [ 0.986748@0] NetLabel: domain hash size = 128 [ 0.990784@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996007@0] NetLabel: unlabeled traffic allowed by default [ 1.003477@2] clocksource: Switched to clocksource arch_sys_counter [ 1.104010@2] VFS: Disk quotas dquot_6.6.0 [ 1.104117@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.123168@3] NET: Registered protocol family 2 [ 1.123984@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.129390@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.136062@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142627@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148621@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.155262@3] NET: Registered protocol family 1 [ 1.160073@3] RPC: Registered named UNIX socket transport module. [ 1.165751@3] RPC: Registered udp transport module. [ 1.170633@3] RPC: Registered tcp transport module. [ 1.175530@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.183675@3] Unpacking initramfs... [ 1.285103@3] Freeing initrd memory: 2308K [ 1.286518@3] hw perfevents: clusterb_enabled = 0 [ 1.288346@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.292781@3] hw perfevents: cluster A irq = 7 [ 1.297352@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.306682@3] audit: initializing netlink subsys (disabled) [ 1.310860@3] audit: type=2000 audit(1.080:1): initialized [ 1.317469@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.338494@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.340486@2] NFS: Registering the id_resolver key type [ 1.344213@2] Key type id_resolver registered [ 1.348503@2] Key type id_legacy registered [ 1.353002@2] fuse init (API version 7.26) [ 1.361551@2] NET: Registered protocol family 38 [ 1.361595@2] Key type asymmetric registered [ 1.365769@2] Asymmetric key parser 'x509' registered [ 1.371100@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.378454@2] io scheduler noop registered (default) [ 1.383422@2] io scheduler deadline registered [ 1.388178@2] io scheduler cfq registered [ 1.402853@1] random: fast init done [ 1.402920@1] random: crng init done [ 1.403417@2] Unable to detect cache hierarchy for CPU 0 [ 1.431415@2] loop: module loaded [ 1.432380@2] zram: Added device: zram0 [ 1.433354@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.440517@2] libphy: Fixed MDIO Bus: probed [ 1.444381@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.449155@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.456753@2] PPP generic driver version 2.4.2 [ 1.460289@2] PPP BSD Compression module registered [ 1.464903@2] PPP Deflate Compression module registered [ 1.470151@2] PPP MPPE Compression module registered [ 1.475117@2] NET: Registered protocol family 24 [ 1.479908@2] usbcore: registered new interface driver asix [ 1.485478@2] usbcore: registered new interface driver ax88179_178a [ 1.491741@2] usbcore: registered new interface driver cdc_ether [ 1.497775@2] usbcore: registered new interface driver net1080 [ 1.503629@2] usbcore: registered new interface driver cdc_subset [ 1.509758@2] usbcore: registered new interface driver zaurus [ 1.515571@2] usbcore: registered new interface driver cdc_ncm [ 1.522001@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.528078@2] ehci-pci: EHCI PCI platform driver [ 1.532813@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.539120@2] ohci-pci: OHCI PCI platform driver [ 1.544297@2] usbcore: registered new interface driver cdc_acm [ 1.549603@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.557917@2] usbcore: registered new interface driver usb-storage [ 1.564182@2] usbcore: registered new interface driver usbserial [ 1.570637@1] mousedev: PS/2 mouse device common for all mice [ 1.576236@1] usbcore: registered new interface driver xpad [ 1.581680@2] i2c /dev entries driver [ 1.585287@2] usbcore: registered new interface driver uvcvideo [ 1.591072@2] USB Video Class driver (1.1.1) [ 1.595353@2] md: linear personality registered for level -1 [ 1.601538@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.611143@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.617034@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.624793@3] usbcore: registered new interface driver usbhid [ 1.628707@3] usbhid: USB HID core driver [ 1.632965@0] ashmem: initialized [ 1.636436@3] logger: created 512K log 'log_main' [ 1.641002@0] logger: created 1K log 'log_events' [ 1.645674@3] logger: created 1K log 'log_radio' [ 1.650344@0] logger: created 16K log 'log_system' [ 1.654946@0] exFAT: Version 1.3.0 [ 1.660257@0] ff803000.serial: clock gate not found [ 1.663283@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.670488@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.685454@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.688043@0] console [ttyS0] enabled [ 1.688043@0] console [ttyS0] enabled [ 1.695244@0] bootconsole [aml_uart0] disabled [ 1.695244@0] bootconsole [aml_uart0] disabled [ 1.704765@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.711205@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.721482@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.731284@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.737808@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.750209@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.754321@3] irq = 20 [ 1.756629@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.765416@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.769826@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.775074@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.781545@3] meson-remote: Driver init [ 1.785511@3] meson-remote: remote_probe [ 1.789117@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.794180@3] meson-remote ff808040.rc: don't find the node [ 1.800729@3] meson-remote ff808040.rc: led_blink = 0 [ 1.805732@3] meson-remote ff808040.rc: don't find the node [ 1.812631@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.818294@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.823975@3] meson-remote ff808040.rc: custom_number = 3 [ 1.829297@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.834973@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.842134@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.848425@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.854576@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.860243@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.867401@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.873696@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.879841@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.885513@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.892671@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.898967@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.905096@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.911818@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.917596@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.923374@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.929067@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.934760@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.940711@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.946576@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.952182@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.957530@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.962877@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.968944@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.975892@0] meson-remote: IR XMP protocol handler initialized [ 1.981536@0] efusekeynum: 4 [ 1.984055@0] efusekeyname: mac offset: 0 size: 6 [ 1.990424@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.996785@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.003169@0] efusekeyname: usid offset: 18 size: 16 [ 2.009828@1] efuse efuse: probe OK! [ 2.015608@1] ge2d: ge2d_init_module [ 2.017150@1] [tsync_pcr_init]init success. [ 2.021679@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.028189@1] DI: di_module_init ok. [ 2.031211@1] dim:dim_module_init [ 2.034553@1] dim:dim_module_init finish [ 2.038195@1] dil:dil_init. [ 2.041180@1] dil:dil_init ok. [ 2.044026@1] vdin_drv_init: major 241 [ 2.047936@1] vdin_drv_init: vdin driver init done [ 2.052428@1] [viuin..]viuin_init_module viuin module init [ 2.058254@1] [viuin..]viuin_probe probe ok. [ 2.062345@1] amlvid:info: amlvideo_init called[ 2.066398@1] amlvid:info: amlvideo_create_instance called [ 2.071816@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.077167@3] amlvideo-000: V4L2 device registered as video10 [ 2.082625@3] amlvid:info: amlvideo_create_instance called [ 2.088033@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.093370@2] amlvideo-001: V4L2 device registered as video23 [ 2.099116@2] PPMGRDRV: warn: ppmgr module init func called [ 2.105305@0] videosync_create_instance dev_s ffffffc01c913400,dev_s->dev ffffffc01c97ea80 [ 2.112572@0] videosync_create_instance reg videosync.0 [ 2.117834@0] aml_vecm_init:module init [ 2.117835@2] videosync_thread started [ 2.125531@0] amdolby_vision_init:module init [ 2.129821@0] prime_sl module init [ 2.133451@0] amlogic mtd driver init [ 2.137161@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.142373@0] bl mode descrete [ 2.145300@0] fip_copies 4 [ 2.147972@0] fip_size 0x200000 [ 2.151067@0] nand_clk_ctrl 0xffe07000 [ 2.154784@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.160415@0] nand_clk_ctrl 0xffe07000 [ 2.164114@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.172447@0] plat->aml_nand_device ffffff800a778cf8 [ 2.176959@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.182949@0] NAND device id: c2 dc 90 a2 57 3 [ 2.187134@0] NAND device: Manufacturer ID: [ 2.191183@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.197842@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.203342@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.208863@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.215176@0] mtd->oobavail: 0x10 [ 2.218740@3] aml_nand_init 2119: plat-name:bootloader [ 2.223545@3] Creating 1 MTD partitions on "bootloader": [ 2.228794@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.236699@1] bootloader initialized ok [ 2.238016@1] plat->aml_nand_device ffffff800a778cf8 [ 2.242966@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.248984@1] NAND device id: c2 dc 90 a2 57 3 [ 2.253115@1] NAND device: Manufacturer ID: [ 2.257163@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.263822@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.269328@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.274845@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.281150@1] mtd->oobavail: 0x10 [ 2.284576@1] aml_nand_init 2119: plat-name:nandnormal [ 2.289530@1] bbt_start=20 [ 2.292180@1] env_start=24 [ 2.294844@1] key_start=32 [ 2.297527@1] dtb_start=40 [ 2.300199@1] ddr_start=44 [ 2.302879@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.309356@1] get_free_node 43: bitmap=0 [ 2.312794@1] get_free_node 55: bitmap=1 [ 2.316878@1] get_free_node 43: bitmap=1 [ 2.320556@1] get_free_node 55: bitmap=3 [ 2.324640@1] get_free_node 43: bitmap=3 [ 2.328318@1] get_free_node 55: bitmap=7 [ 2.332200@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.338839@1] nbbt free list: [ 2.341772@1] blockN=21, ec=-1, dirty_flag=0 [ 2.345998@1] blockN=22, ec=-1, dirty_flag=0 [ 2.350225@1] blockN=23, ec=-1, dirty_flag=0 [ 2.354452@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.359867@1] nbbt valid addr: 500000 [ 2.363069@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.368683@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.374925@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.381336@1] get_free_node 43: bitmap=7 [ 2.384812@1] get_free_node 55: bitmap=f [ 2.388895@1] get_free_node 43: bitmap=f [ 2.392575@1] get_free_node 55: bitmap=1f [ 2.396745@1] get_free_node 43: bitmap=1f [ 2.400509@1] get_free_node 55: bitmap=3f [ 2.404679@1] get_free_node 43: bitmap=3f [ 2.408444@1] get_free_node 55: bitmap=7f [ 2.412614@1] get_free_node 43: bitmap=7f [ 2.416379@1] get_free_node 55: bitmap=ff [ 2.420550@1] get_free_node 43: bitmap=ff [ 2.424314@1] get_free_node 55: bitmap=1ff [ 2.428570@1] get_free_node 43: bitmap=1ff [ 2.432422@1] get_free_node 55: bitmap=3ff [ 2.436481@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.443116@1] nenv free list: [ 2.446048@1] blockN=25, ec=-1, dirty_flag=0 [ 2.450275@1] blockN=26, ec=-1, dirty_flag=0 [ 2.454501@1] blockN=27, ec=-1, dirty_flag=0 [ 2.458727@1] blockN=28, ec=-1, dirty_flag=0 [ 2.462953@1] blockN=29, ec=-1, dirty_flag=0 [ 2.467179@1] blockN=30, ec=-1, dirty_flag=0 [ 2.471406@1] blockN=31, ec=-1, dirty_flag=0 [ 2.475632@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.487367@1] nenv valid addr: 610000 [ 2.487387@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.491825@1] get_free_node 43: bitmap=3ff [ 2.495669@1] get_free_node 55: bitmap=7ff [ 2.499948@1] get_free_node 43: bitmap=7ff [ 2.503777@1] get_free_node 55: bitmap=fff [ 2.508033@1] get_free_node 43: bitmap=fff [ 2.511884@1] get_free_node 55: bitmap=1fff [ 2.516226@1] get_free_node 43: bitmap=1fff [ 2.520164@1] get_free_node 55: bitmap=3fff [ 2.524506@1] get_free_node 43: bitmap=3fff [ 2.528444@1] get_free_node 55: bitmap=7fff [ 2.532787@1] get_free_node 43: bitmap=7fff [ 2.536724@1] get_free_node 55: bitmap=ffff [ 2.541066@1] get_free_node 43: bitmap=ffff [ 2.545004@1] get_free_node 55: bitmap=1ffff [ 2.549433@1] get_free_node 43: bitmap=1ffff [ 2.553456@1] get_free_node 55: bitmap=3ffff [ 2.557682@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.564323@1] nkey free list: [ 2.567248@1] blockN=32, ec=-1, dirty_flag=0 [ 2.571482@1] blockN=33, ec=-1, dirty_flag=0 [ 2.575708@1] blockN=34, ec=-1, dirty_flag=0 [ 2.579934@1] blockN=35, ec=-1, dirty_flag=0 [ 2.584160@1] blockN=36, ec=-1, dirty_flag=0 [ 2.588387@1] blockN=37, ec=-1, dirty_flag=0 [ 2.592613@1] blockN=38, ec=-1, dirty_flag=0 [ 2.596839@1] blockN=39, ec=-1, dirty_flag=0 [ 2.601066@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.606155@1] nkey valid addr: fffffffffffc0000 [ 2.610644@1] aml_nand_key_check 1251 NO key exist [ 2.615384@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.621998@1] get_free_node 43: bitmap=3ffff [ 2.625820@1] get_free_node 55: bitmap=7ffff [ 2.630255@1] get_free_node 43: bitmap=7ffff [ 2.634274@1] get_free_node 55: bitmap=fffff [ 2.638702@1] get_free_node 43: bitmap=fffff [ 2.642727@1] get_free_node 55: bitmap=1fffff [ 2.647038@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.653678@1] ndtb free list: [ 2.656611@1] blockN=41, ec=-1, dirty_flag=0 [ 2.660837@1] blockN=42, ec=-1, dirty_flag=0 [ 2.665063@1] blockN=43, ec=-1, dirty_flag=0 [ 2.669290@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.687282@1] ndtb valid addr: a00000 [ 2.687302@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.691738@1] get_free_node 43: bitmap=1fffff [ 2.695847@1] get_free_node 55: bitmap=3fffff [ 2.700361@1] get_free_node 43: bitmap=3fffff [ 2.704472@1] get_free_node 55: bitmap=7fffff [ 2.708784@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.715424@1] nddr free list: [ 2.718357@1] blockN=44, ec=-1, dirty_flag=0 [ 2.722583@1] blockN=45, ec=-1, dirty_flag=0 [ 2.726810@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.731898@1] nddr valid addr: fffffffffffc0000 [ 2.736384@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.741130@1] tpl: off 16777216, size 8388608 [ 2.807396@1] Creating 7 MTD partitions on "nandnormal": [ 2.807426@1] 0x000001000000-0x000001800000 : "tpl" [ 2.814847@3] 0x000001800000-0x000001a00000 : "misc" [ 2.822307@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.823763@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.830167@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.834987@0] 0x000003b00000-0x000015300000 : "system" [ 2.873890@0] 0x000015300000-0x000020000000 : "data" [ 2.897118@0] nandnormal initialized ok [ 2.897199@0] aml_ubootenv_init: register env chardev [ 2.900557@0] aml_ubootenv_init: register env chardev OK [ 2.905785@0] amlnf_dtb_init: register dtb cdev [ 2.910297@0] amlnf_dtb_init: register dtd cdev OK [ 2.914855@0] mtd_nand_probe 267 , err = 0 [ 2.919595@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.925183@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.932003@0] unifykey: storage in base: 0xffffffc005000000 [ 2.936935@0] unifykey: storage out base: 0xffffffc005040000 [ 2.942515@0] unifykey: storage block base: 0xffffffc005080000 [ 2.948295@0] unifykey: probe done! [ 2.952196@0] unifykey: no efuse-version set, use default value: -1 [ 2.957974@0] unifykey: key unify config unifykey-num is 6 [ 2.963431@0] unifykey: key unify fact unifykey-num is 6 [ 2.968655@0] unifykey: unifykey_devno: ee00000 [ 2.973421@0] unifykey: device unifykeys created ok [ 2.978049@0] unifykey: aml_unifykeys_init done! [ 2.982826@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.989152@3] amlkaraoke init success! [ 2.992344@3] sysled: module init [ 2.995721@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.000670@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.007807@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.014346@1] amlogic rfkill init [ 3.018966@3] dmc_monitor_probe [ 3.020762@3] page_trace_module_init, create sysfs failed [ 3.026381@3] defendkey defendkey: Reserved memory is not enough! [ 3.031928@3] defendkey: probe of defendkey failed with error -22 [ 3.038902@3] usbcore: registered new interface driver snd-usb-audio [ 3.048252@3] asoc debug: aml_audio_controller_probe-130 [ 3.049944@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.055312@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.063099@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.070270@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.076642@3] aml_tdm_platform_probe(), share en = 1[ 3.081379@3] No channel mask node Channel_Mask [ 3.086180@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.091690@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.099660@3] aml_tdm_platform_probe(), share en = 1[ 3.104151@3] No channel mask node Channel_Mask [ 3.108883@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.114456@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.122392@3] aml_tdm_platform_probe(), share en = 1[ 3.126918@3] No channel mask node Channel_Mask [ 3.132514@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.139573@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.147657@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.157577@2] Register vad [ 3.158714@2] check whether to update sound card init data [ 3.164572@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.171527@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.178848@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.184452@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.192128@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.199507@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.205330@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.211818@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.218931@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.224861@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.231839@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.237577@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.244331@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.252236@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.259131@2] snd_card_add_kcontrols card:ffffffc01c88d018 [ 3.264196@2] effect_v2 is not init [ 3.267602@2] Failed to add VAD controls [ 3.271852@2] GACT probability NOT on [ 3.275100@2] Mirror/redirect action on [ 3.278923@2] u32 classifier [ 3.281742@2] Actions configured [ 3.285276@2] Netfilter messages via NETLINK v0.30. [ 3.290357@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.296550@2] ctnetlink v0.93: registering with nfnetlink. [ 3.302253@3] xt_time: kernel timezone is -0000 [ 3.306246@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.312439@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.317470@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.323028@3] Initializing XFRM netlink socket [ 3.328027@3] NET: Registered protocol family 10 [ 3.333211@3] mip6: Mobile IPv6 [ 3.335065@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.340904@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.347950@3] NET: Registered protocol family 17 [ 3.351190@3] NET: Registered protocol family 15 [ 3.355808@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.368909@3] Bluetooth: RFCOMM TTY layer initialized [ 3.373788@3] Bluetooth: RFCOMM socket layer initialized [ 3.379056@3] Bluetooth: RFCOMM ver 1.11 [ 3.382915@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.388343@3] Bluetooth: BNEP filters: protocol multicast [ 3.393694@3] Bluetooth: BNEP socket layer initialized [ 3.398778@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.404818@3] Bluetooth: HIDP socket layer initialized [ 3.409991@3] l2tp_core: L2TP core driver, V2.0 [ 3.414403@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.419305@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.425030@3] l2tp_netlink: L2TP netlink interface [ 3.429785@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.435810@3] l2tp_debugfs: L2TP debugfs support [ 3.440350@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.446948@3] NET: Registered protocol family 35 [ 3.451713@3] Key type dns_resolver registered [ 3.456894@3] Registered swp emulation handler [ 3.460295@3] Registered cp15_barrier emulation handler [ 3.465550@3] Registered setend emulation handler [ 3.470177@3] disable EAS feature [ 3.474347@1] registered taskstats version 1 [ 3.487063@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.993302@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.993367@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.001567@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.009975@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.016860@2] hub 1-0:1.0: USB hub found [ 4.019890@2] hub 1-0:1.0: 1 port detected [ 4.024223@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.029486@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.037326@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.046224@1] hub 2-0:1.0: USB hub found [ 4.049376@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.056663@1] usb usb2: Unsupported the hub [ 4.061103@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.069218@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.177883@1] dwc_otg: Core Release: 3.10a [ 4.177921@1] dwc_otg: Setting default values for core params [ 4.182083@1] dwc_otg: curmode: 0, host_only: 0 [ 4.198880@1] dwc_otg: Using Buffer DMA mode [ 4.198903@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.202781@1] dwc_otg: Working on port type = SLAVE [ 4.207614@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.214673@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.223888@0] gxbb_pm: enter meson_pm_probe! [ 4.223927@0] no vddio3v3_en pin[ 4.225568@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.230659@0] gxbb_pm: meson_pm_probe done [ 4.23499[ 4.241257@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.246695@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.457826@0] ubi0: attaching mtd6 [ 4.986644@0] ubi0: scanning is finished [ 4.991013@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.991302@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.998310@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.005197@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.012264@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.018477@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.025805@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.035051@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.044449@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.050358@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.095186@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.097173@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.107126@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.117903@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.123857@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301098@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.359077@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.445253@2] ubi1: attaching mtd7 [ 5.771809@2] ubi1: scanning is finished [ 5.775911@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776030@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783033@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.789927@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.796992@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803119@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810447@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.819679@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829000@1] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.838138@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.861880@3] UBIFS (ubi1:0): recovery needed [ 5.933632@3] UBIFS (ubi1:0): recovery completed [ 5.933787@3] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.939970@3] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.949968@3] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.960660@3] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.967390@3] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bfe450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.996888@0] aml_tdm_open [ 7.007650@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.007687@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.014217@2] aml_tdm_open [ 7.015969@2] Not init audio effects Opened TCP tuning[ 7.023211@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.027691@3] cpufreq_interactive: no need to active hmp boost! interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.112740@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.116422@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.122320@2] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.176253@2] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687615@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.306690@0] asoc-aml-card auge_sound: tdm playback stop [ 14.306997@0] asoc-aml-card auge_sound: tdm capture stop [ 14.311859@0] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.302154@3] mtd_nand_reboot_notifier 35 [ 16.302418@3] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.310871@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.314114@3] usb usb2: USB disconnect, device number 1 [ 16.324017@0] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.324796@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.330162@0] usb usb1: USB disconnect, device number 1 [ 16.338208@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.359562@0] reboot: Restarting system [ 16.360018@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21797 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015878 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974871 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021109@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031587@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129132@0] ftrace: allocating 43519 entries in 170 pages [ 0.209542@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210352@0] CPU0: update cpu_capacity 1024 [ 0.214677@0] ASID allocator initialised with 32768 entries [ 0.252661@0] secmon: can't fine clear_range [ 0.253242@0] EFI services will not be available. [ 0.256094@0] Meson chip version = RevC (25:C - 43:0) [ 0.290025@1] Detected VIPT I-cache on CPU1 [ 0.290087@1] CPU1: update cpu_capacity 1024 [ 0.290090@1] CPU1: Booted secondary processor [410fd034] [ 0.318077@2] Detected VIPT I-cache on CPU2 [ 0.318130@2] CPU2: update cpu_capacity 1024 [ 0.318132@2] CPU2: Booted secondary processor [410fd034] [ 0.346145@3] Detected VIPT I-cache on CPU3 [ 0.346196@3] CPU3: update cpu_capacity 1024 [ 0.346198@3] CPU3: Booted secondary processor [410fd034] [ 0.346289@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390417@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407410@0] CPU: All CPU(s) started at EL2 [ 0.408193@0] alternatives: patching kernel code [ 0.413601@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420735@0] devtmpfs: initialized [ 0.436158@0] DMI not present or invalid. [ 0.436545@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444537@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451099@0] pinctrl core: initialized pinctrl subsystem [ 0.457692@0] NET: Registered protocol family 16 [ 0.477038@0] cpuidle: using governor menu [ 0.477188@0] register canvas platform driver [ 0.479903@0] register rdma platform driver [ 0.485355@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491726@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499195@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505289@0] clkmsr: clkmsr: driver init [ 0.509043@0] codec_mm_module_init [ 0.512474@0] media_configs_system_init [ 0.516621@0] aml_watch_point_probe, in, wp:2 [ 0.522132@0] pstore: using zlib compression [ 0.525534@0] console [pstore-1] enabled [ 0.528860@0] pstore: Registered ramoops as persistent store backend [ 0.535260@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549301@0] aml_iomap: amlogic iomap probe done [ 0.553979@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555902@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564864@0] audio_clocks: audio_clocks_probe done [ 0.573463@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573519@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578683@0] amlogic auge_snd_iomap probe done [ 0.853747@0] vgaarb: loaded [ 0.854139@0] SCSI subsystem initialized [ 0.855268@0] usbcore: registered new interface driver usbfs [ 0.860830@0] usbcore: registered new interface driver hub [ 0.866263@0] usbcore: registered new device driver usb [ 0.871533@0] Linux video capture interface: v2.00 [ 0.876278@0] pps_core: LinuxPPS API ver. 1 registered [ 0.881353@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.890771@0] PTP clock support registered [ 0.899103@0] dmi: Firmware registration failed. [ 0.899851@0] secmon: reserve_mem_size:0x300000 [ 0.904095@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.910991@0] secmon: get page:ffffffbf00140000, 5000 [ 0.915736@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924127@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.930863@0] fb: osd_init_module [ 0.935362@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.940929@0] Bluetooth: Core ver 2.22 [ 0.944053@0] NET: Registered protocol family 31 [ 0.948663@0] Bluetooth: HCI device and connection manager initialized [ 0.955203@0] Bluetooth: HCI socket layer initialized [ 0.960269@0] Bluetooth: L2CAP socket layer initialized [ 0.965588@0] Bluetooth: SCO socket layer initialized [ 0.971141@0] NetLabel: Initializing [ 0.974169@0] NetLabel: domain hash size = 128 [ 0.978817@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.983970@0] NetLabel: unlabeled traffic allowed by default [ 0.991453@2] clocksource: Switched to clocksource arch_sys_counter [ 1.092010@2] VFS: Disk quotas dquot_6.6.0 [ 1.092118@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.111187@2] NET: Registered protocol family 2 [ 1.112009@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.117409@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.124128@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.130642@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.136613@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.143274@2] NET: Registered protocol family 1 [ 1.148084@2] RPC: Registered named UNIX socket transport module. [ 1.153768@2] RPC: Registered udp transport module. [ 1.158649@2] RPC: Registered tcp transport module. [ 1.163541@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.171702@2] Unpacking initramfs... [ 1.273161@2] Freeing initrd memory: 2308K [ 1.274584@2] hw perfevents: clusterb_enabled = 0 [ 1.276414@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.280847@2] hw perfevents: cluster A irq = 7 [ 1.285414@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.294755@2] audit: initializing netlink subsys (disabled) [ 1.298925@2] audit: type=2000 audit(1.064:1): initialized [ 1.305574@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326445@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332465@2] NFS: Registering the id_resolver key type [ 1.332526@2] Key type id_resolver registered [ 1.336472@2] Key type id_legacy registered [ 1.340979@2] fuse init (API version 7.26) [ 1.349694@2] NET: Registered protocol family 38 [ 1.349739@2] Key type asymmetric registered [ 1.353711@2] Asymmetric key parser 'x509' registered [ 1.359067@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366432@2] io scheduler noop registered (default) [ 1.371372@2] io scheduler deadline registered [ 1.376090@2] io scheduler cfq registered [ 1.390784@1] random: fast init done [ 1.390851@1] random: crng init done [ 1.391336@2] Unable to detect cache hierarchy for CPU 0 [ 1.415371@2] loop: module loaded [ 1.416455@2] zram: Added device: zram0 [ 1.417251@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.424596@2] libphy: Fixed MDIO Bus: probed [ 1.428336@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.433116@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.440676@2] PPP generic driver version 2.4.2 [ 1.444244@2] PPP BSD Compression module registered [ 1.448854@2] PPP Deflate Compression module registered [ 1.454100@2] PPP MPPE Compression module registered [ 1.459066@2] NET: Registered protocol family 24 [ 1.463847@2] usbcore: registered new interface driver asix [ 1.469439@2] usbcore: registered new interface driver ax88179_178a [ 1.475698@2] usbcore: registered new interface driver cdc_ether [ 1.481721@2] usbcore: registered new interface driver net1080 [ 1.487579@2] usbcore: registered new interface driver cdc_subset [ 1.493705@2] usbcore: registered new interface driver zaurus [ 1.499517@2] usbcore: registered new interface driver cdc_ncm [ 1.505947@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.512032@2] ehci-pci: EHCI PCI platform driver [ 1.516752@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.523073@2] ohci-pci: OHCI PCI platform driver [ 1.528278@2] usbcore: registered new interface driver cdc_acm [ 1.533560@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.541856@2] usbcore: registered new interface driver usb-storage [ 1.548126@2] usbcore: registered new interface driver usbserial [ 1.554599@2] mousedev: PS/2 mouse device common for all mice [ 1.560169@2] usbcore: registered new interface driver xpad [ 1.565622@2] i2c /dev entries driver [ 1.569241@2] usbcore: registered new interface driver uvcvideo [ 1.575019@2] USB Video Class driver (1.1.1) [ 1.579297@2] md: linear personality registered for level -1 [ 1.585489@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.595144@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.600964@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.608802@3] usbcore: registered new interface driver usbhid [ 1.612674@3] usbhid: USB HID core driver [ 1.616921@0] ashmem: initialized [ 1.620375@3] logger: created 512K log 'log_main' [ 1.624922@3] logger: created 1K log 'log_events' [ 1.629622@0] logger: created 1K log 'log_radio' [ 1.634290@3] logger: created 16K log 'log_system' [ 1.638937@3] exFAT: Version 1.3.0 [ 1.643620@0] ff803000.serial: clock gate not found [ 1.647234@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.654439@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.669405@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.672007@0] console [ttyS0] enabled [ 1.672007@0] console [ttyS0] enabled [ 1.679197@0] bootconsole [aml_uart0] disabled [ 1.679197@0] bootconsole [aml_uart0] disabled [ 1.688782@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.695150@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.705428@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.715258@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.721753@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.734184@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.738245@3] irq = 20 [ 1.740594@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.749378@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.753821@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.759048@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.765496@3] meson-remote: Driver init [ 1.769455@3] meson-remote: remote_probe [ 1.773088@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.778148@3] meson-remote ff808040.rc: don't find the node [ 1.784686@3] meson-remote ff808040.rc: led_blink = 0 [ 1.789684@3] meson-remote ff808040.rc: don't find the node [ 1.796588@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.802227@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.807931@3] meson-remote ff808040.rc: custom_number = 3 [ 1.813251@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.818928@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.826081@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.832381@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.838528@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.844196@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.851352@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.857648@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.863794@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.869465@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.876623@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.882920@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.889048@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.895771@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.901549@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.907327@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.913020@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.918712@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.924664@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.930529@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.936135@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.941483@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.946830@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.952886@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.959924@1] meson-remote: IR XMP protocol handler initialized [ 1.965494@1] efusekeynum: 4 [ 1.968010@1] efusekeyname: mac offset: 0 size: 6 [ 1.974357@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.980736@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.987118@1] efusekeyname: usid offset: 18 size: 16 [ 1.993797@2] efuse efuse: probe OK! [ 1.999427@1] ge2d: ge2d_init_module [ 2.001115@1] [tsync_pcr_init]init success. [ 2.005627@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.012060@1] DI: di_module_init ok. [ 2.015158@1] dim:dim_module_init [ 2.018535@1] dim:dim_module_init finish [ 2.022146@1] dil:dil_init. [ 2.025099@1] dil:dil_init ok. [ 2.027967@1] vdin_drv_init: major 241 [ 2.031886@1] vdin_drv_init: vdin driver init done [ 2.036379@1] [viuin..]viuin_init_module viuin module init [ 2.042194@1] [viuin..]viuin_probe probe ok. [ 2.046292@1] amlvid:info: amlvideo_init called[ 2.050349@1] amlvid:info: amlvideo_create_instance called [ 2.055772@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.061290@1] amlvideo-000: V4L2 device registered as video10 [ 2.066572@1] amlvid:info: amlvideo_create_instance called [ 2.071983@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.077326@0] amlvideo-001: V4L2 device registered as video23 [ 2.083083@0] PPMGRDRV: warn: ppmgr module init func called [ 2.089241@2] videosync_create_instance dev_s ffffffc01c988000,dev_s->dev ffffffc01c964400 [ 2.096499@2] videosync_create_instance reg videosync.0 [ 2.101745@2] aml_vecm_init:module init [ 2.101747@0] videosync_thread started [ 2.109473@2] amdolby_vision_init:module init [ 2.113752@2] prime_sl module init [ 2.117386@2] amlogic mtd driver init [ 2.121110@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.126324@2] bl mode descrete [ 2.129252@2] fip_copies 4 [ 2.131922@2] fip_size 0x200000 [ 2.135020@2] nand_clk_ctrl 0xffe07000 [ 2.138736@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.144366@2] nand_clk_ctrl 0xffe07000 [ 2.148065@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.156397@2] plat->aml_nand_device ffffff800a778cf8 [ 2.160920@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.166895@2] NAND device id: c2 dc 90 a2 57 3 [ 2.171090@2] NAND device: Manufacturer ID: [ 2.175137@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.181795@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.187294@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.192816@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.199117@2] mtd->oobavail: 0x10 [ 2.202702@2] aml_nand_init 2119: plat-name:bootloader [ 2.207483@2] Creating 1 MTD partitions on "bootloader": [ 2.212750@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.220204@0] bootloader initialized ok [ 2.221969@0] plat->aml_nand_device ffffff800a778cf8 [ 2.226908@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.232931@0] NAND device id: c2 dc 90 a2 57 3 [ 2.237068@0] NAND device: Manufacturer ID: [ 2.241116@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.247787@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.253276@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.258801@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.265120@0] mtd->oobavail: 0x10 [ 2.268531@0] aml_nand_init 2119: plat-name:nandnormal [ 2.273491@0] bbt_start=20 [ 2.276136@0] env_start=24 [ 2.278797@0] key_start=32 [ 2.281478@0] dtb_start=40 [ 2.284153@0] ddr_start=44 [ 2.286821@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.293306@0] get_free_node 43: bitmap=0 [ 2.296747@0] get_free_node 55: bitmap=1 [ 2.300830@0] get_free_node 43: bitmap=1 [ 2.304508@0] get_free_node 55: bitmap=3 [ 2.308593@0] get_free_node 43: bitmap=3 [ 2.312271@0] get_free_node 55: bitmap=7 [ 2.316152@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.322792@0] nbbt free list: [ 2.325725@0] blockN=21, ec=-1, dirty_flag=0 [ 2.329951@0] blockN=22, ec=-1, dirty_flag=0 [ 2.334177@0] blockN=23, ec=-1, dirty_flag=0 [ 2.338404@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.343819@0] nbbt valid addr: 500000 [ 2.347022@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.352637@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.358877@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.365288@0] get_free_node 43: bitmap=7 [ 2.368765@0] get_free_node 55: bitmap=f [ 2.372848@0] get_free_node 43: bitmap=f [ 2.376527@0] get_free_node 55: bitmap=1f [ 2.380697@0] get_free_node 43: bitmap=1f [ 2.384462@0] get_free_node 55: bitmap=3f [ 2.388632@0] get_free_node 43: bitmap=3f [ 2.392397@0] get_free_node 55: bitmap=7f [ 2.396567@0] get_free_node 43: bitmap=7f [ 2.400332@0] get_free_node 55: bitmap=ff [ 2.404502@0] get_free_node 43: bitmap=ff [ 2.408267@0] get_free_node 55: bitmap=1ff [ 2.412522@0] get_free_node 43: bitmap=1ff [ 2.416374@0] get_free_node 55: bitmap=3ff [ 2.420427@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.427068@0] nenv free list: [ 2.430001@0] blockN=25, ec=-1, dirty_flag=0 [ 2.434227@0] blockN=26, ec=-1, dirty_flag=0 [ 2.438453@0] blockN=27, ec=-1, dirty_flag=0 [ 2.442680@0] blockN=28, ec=-1, dirty_flag=0 [ 2.446906@0] blockN=29, ec=-1, dirty_flag=0 [ 2.451132@0] blockN=30, ec=-1, dirty_flag=0 [ 2.455358@0] blockN=31, ec=-1, dirty_flag=0 [ 2.459585@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.471322@0] nenv valid addr: 610000 [ 2.471342@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.475771@0] get_free_node 43: bitmap=3ff [ 2.479622@0] get_free_node 55: bitmap=7ff [ 2.483878@0] get_free_node 43: bitmap=7ff [ 2.487729@0] get_free_node 55: bitmap=fff [ 2.491985@0] get_free_node 43: bitmap=fff [ 2.495836@0] get_free_node 55: bitmap=1fff [ 2.500179@0] get_free_node 43: bitmap=1fff [ 2.504117@0] get_free_node 55: bitmap=3fff [ 2.508459@0] get_free_node 43: bitmap=3fff [ 2.512397@0] get_free_node 55: bitmap=7fff [ 2.516739@0] get_free_node 43: bitmap=7fff [ 2.520680@0] get_free_node 55: bitmap=ffff [ 2.525020@0] get_free_node 43: bitmap=ffff [ 2.528957@0] get_free_node 55: bitmap=1ffff [ 2.533386@0] get_free_node 43: bitmap=1ffff [ 2.537409@0] get_free_node 55: bitmap=3ffff [ 2.541635@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.548275@0] nkey free list: [ 2.551200@0] blockN=32, ec=-1, dirty_flag=0 [ 2.555439@0] blockN=33, ec=-1, dirty_flag=0 [ 2.559661@0] blockN=34, ec=-1, dirty_flag=0 [ 2.563887@0] blockN=35, ec=-1, dirty_flag=0 [ 2.568113@0] blockN=36, ec=-1, dirty_flag=0 [ 2.572339@0] blockN=37, ec=-1, dirty_flag=0 [ 2.576565@0] blockN=38, ec=-1, dirty_flag=0 [ 2.580792@0] blockN=39, ec=-1, dirty_flag=0 [ 2.585018@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.590107@0] nkey valid addr: fffffffffffc0000 [ 2.594591@0] aml_nand_key_check 1251 NO key exist [ 2.599337@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.605951@0] get_free_node 43: bitmap=3ffff [ 2.609773@0] get_free_node 55: bitmap=7ffff [ 2.614202@0] get_free_node 43: bitmap=7ffff [ 2.618224@0] get_free_node 55: bitmap=fffff [ 2.622654@0] get_free_node 43: bitmap=fffff [ 2.626677@0] get_free_node 55: bitmap=1fffff [ 2.630990@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.637677@0] ndtb free list: [ 2.640565@0] blockN=41, ec=-1, dirty_flag=0 [ 2.644789@0] blockN=42, ec=-1, dirty_flag=0 [ 2.649015@0] blockN=43, ec=-1, dirty_flag=0 [ 2.653242@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.671244@0] ndtb valid addr: a00000 [ 2.671264@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.675698@0] get_free_node 43: bitmap=1fffff [ 2.679808@0] get_free_node 55: bitmap=3fffff [ 2.684323@0] get_free_node 43: bitmap=3fffff [ 2.688433@0] get_free_node 55: bitmap=7fffff [ 2.692745@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.699385@0] nddr free list: [ 2.702318@0] blockN=44, ec=-1, dirty_flag=0 [ 2.706544@0] blockN=45, ec=-1, dirty_flag=0 [ 2.710771@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.715860@0] nddr valid addr: fffffffffffc0000 [ 2.720345@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.725091@0] tpl: off 16777216, size 8388608 [ 2.791351@0] Creating 7 MTD partitions on "nandnormal": [ 2.791381@0] 0x000001000000-0x000001800000 : "tpl" [ 2.798643@2] 0x000001800000-0x000001a00000 : "misc" [ 2.802305@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.807107@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.814140@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.818962@2] 0x000003b00000-0x000015300000 : "system" [ 2.857789@2] 0x000015300000-0x000020000000 : "data" [ 2.881006@2] nandnormal initialized ok [ 2.881088@2] aml_ubootenv_init: register env chardev [ 2.884471@2] aml_ubootenv_init: register env chardev OK [ 2.889678@2] amlnf_dtb_init: register dtb cdev [ 2.894192@2] amlnf_dtb_init: register dtd cdev OK [ 2.898745@2] mtd_nand_probe 267 , err = 0 [ 2.903493@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.909065@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.915888@2] unifykey: storage in base: 0xffffffc005000000 [ 2.920820@2] unifykey: storage out base: 0xffffffc005040000 [ 2.926411@2] unifykey: storage block base: 0xffffffc005080000 [ 2.932184@2] unifykey: probe done! [ 2.936088@2] unifykey: no efuse-version set, use default value: -1 [ 2.941858@2] unifykey: key unify config unifykey-num is 6 [ 2.947324@2] unifykey: key unify fact unifykey-num is 6 [ 2.952554@2] unifykey: unifykey_devno: ee00000 [ 2.957300@2] unifykey: device unifykeys created ok [ 2.961939@2] unifykey: aml_unifykeys_init done! [ 2.966716@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.973081@2] amlkaraoke init success! [ 2.976219@2] sysled: module init [ 2.979570@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.984551@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.991676@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 2.998219@2] amlogic rfkill init [ 3.002846@2] dmc_monitor_probe [ 3.004640@2] page_trace_module_init, create sysfs failed [ 3.014271@2] defendkey defendkey: Reserved memory is not enough! [ 3.015796@2] defendkey: probe of defendkey failed with error -22 [ 3.022744@2] usbcore: registered new interface driver snd-usb-audio [ 3.032040@2] asoc debug: aml_audio_controller_probe-130 [ 3.033838@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.039203@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.046982@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.054221@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.060543@2] aml_tdm_platform_probe(), share en = 1[ 3.065275@2] No channel mask node Channel_Mask [ 3.070076@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.075590@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.083561@2] aml_tdm_platform_probe(), share en = 1[ 3.088041@2] No channel mask node Channel_Mask [ 3.092774@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.098348@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.106278@2] aml_tdm_platform_probe(), share en = 1[ 3.110811@2] No channel mask node Channel_Mask [ 3.116380@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.123473@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.131540@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.141449@2] Register vad [ 3.142591@2] check whether to update sound card init data [ 3.148454@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.155469@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.162733@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.168348@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.176016@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.183347@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.189218@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.195708@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.202761@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.208747@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.215663@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.221459@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.228199@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.235851@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.242987@2] snd_card_add_kcontrols card:ffffffc01c9f2018 [ 3.248059@2] effect_v2 is not init [ 3.251486@2] Failed to add VAD controls [ 3.255702@2] GACT probability NOT on [ 3.258993@2] Mirror/redirect action on [ 3.262830@2] u32 classifier [ 3.265634@2] Actions configured [ 3.269168@2] Netfilter messages via NETLINK v0.30. [ 3.274254@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.280456@2] ctnetlink v0.93: registering with nfnetlink. [ 3.286177@3] xt_time: kernel timezone is -0000 [ 3.290148@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.296326@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.301362@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.306924@3] Initializing XFRM netlink socket [ 3.311923@3] NET: Registered protocol family 10 [ 3.317100@3] mip6: Mobile IPv6 [ 3.318952@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.324800@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.331824@3] NET: Registered protocol family 17 [ 3.335089@3] NET: Registered protocol family 15 [ 3.339698@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.352791@3] Bluetooth: RFCOMM TTY layer initialized [ 3.357676@3] Bluetooth: RFCOMM socket layer initialized [ 3.362952@3] Bluetooth: RFCOMM ver 1.11 [ 3.366808@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.372235@3] Bluetooth: BNEP filters: protocol multicast [ 3.377586@3] Bluetooth: BNEP socket layer initialized [ 3.382672@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.388711@3] Bluetooth: HIDP socket layer initialized [ 3.393887@3] l2tp_core: L2TP core driver, V2.0 [ 3.398296@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.403197@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.408922@3] l2tp_netlink: L2TP netlink interface [ 3.413680@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.419698@3] l2tp_debugfs: L2TP debugfs support [ 3.424241@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.430841@3] NET: Registered protocol family 35 [ 3.435613@3] Key type dns_resolver registered [ 3.440771@3] Registered swp emulation handler [ 3.444189@3] Registered cp15_barrier emulation handler [ 3.449350@3] Registered setend emulation handler [ 3.454056@3] disable EAS feature [ 3.458133@1] registered taskstats version 1 [ 3.470961@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.977180@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.977239@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.985348@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.993846@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.000729@2] hub 1-0:1.0: USB hub found [ 4.003764@2] hub 1-0:1.0: 1 port detected [ 4.008126@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.013363@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.021180@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.030065@0] hub 2-0:1.0: USB hub found [ 4.033246@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.040539@0] usb usb2: Unsupported the hub [ 4.044984@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.053077@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.161558@0] dwc_otg: Core Release: 3.10a [ 4.161647@0] dwc_otg: Setting default values for core params [ 4.165760@0] dwc_otg: curmode: 0, host_only: 0 [ 4.182582@0] dwc_otg: Using Buffer DMA mode [ 4.182606@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.186484@0] dwc_otg: Working on port type = SLAVE [ 4.191317@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.198324@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.207948@0] gxbb_pm: enter meson_pm_probe! [ 4.207987@0] no vddio3v3_en pin[ 4.209625@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.214674@0] gxbb_pm: meson_pm_probe done [ 4.21904W 4.225332@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.230719@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.440111@3] ubi0: attaching mtd6 [ 4.968450@3] ubi0: scanning is finished [ 4.972629@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.972917@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.979927@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.986807@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.993878@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.000094@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.007420@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.016653@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.026061@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.031995@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.076694@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.078627@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.088661@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.099418@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.105370@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.285079@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.345908@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.429680@3] ubi1: attaching mtd7 [ 5.756053@3] ubi1: scanning is finished [ 5.760012@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.760129@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.767138@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.774026@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.781092@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.787219@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.794546@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.803779@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.813101@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.822285@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.846018@1] UBIFS (ubi1:0): recovery needed [ 5.919633@1] UBIFS (ubi1:0): recovery completed [ 5.919788@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.925970@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.935964@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.946657@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.953386@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2e76450 --- 0 Starting sshd: [ 6.938750@0] aml_tdm_open [ 6.950426@0] asoc-aml-card auge_sound: tdm prepare capture [ 6.950462@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.957825@1] aml_tdm_open [ 6.958644@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... OK skip network Init because /sys/class/net/eth0 is not exist Audio Stop Callback: Stopping audio stream [ 7.053555@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.053601@0] cpufreq_interactive: no need to active hmp boost! [ 7.058725@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.058730@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.059718@2] asoc-aml-card auge_sound: tdm capture enable Audio Start Callback: Starting audio stream The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.103984@2] asoc-aml-card auge_sound: tdm playback enable # axg_s420_v03 OK [ 8.691593@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22020 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015887 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975687 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016841@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209454@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210264@0] CPU0: update cpu_capacity 1024 [ 0.214590@0] ASID allocator initialised with 32768 entries [ 0.252571@0] secmon: can't fine clear_range [ 0.253171@0] EFI services will not be available. [ 0.256004@0] Meson chip version = RevC (25:C - 43:0) [ 0.289937@1] Detected VIPT I-cache on CPU1 [ 0.289999@1] CPU1: update cpu_capacity 1024 [ 0.290001@1] CPU1: Booted secondary processor [410fd034] [ 0.317988@2] Detected VIPT I-cache on CPU2 [ 0.318039@2] CPU2: update cpu_capacity 1024 [ 0.318042@2] CPU2: Booted secondary processor [410fd034] [ 0.346053@3] Detected VIPT I-cache on CPU3 [ 0.346101@3] CPU3: update cpu_capacity 1024 [ 0.346103@3] CPU3: Booted secondary processor [410fd034] [ 0.346193@0] Brought up 4 CPUs [ 0.385411@0] SMP: Total of 4 processors activated. [ 0.390321@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396357@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407315@0] CPU: All CPU(s) started at EL2 [ 0.408095@0] alternatives: patching kernel code [ 0.413508@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420633@0] devtmpfs: initialized [ 0.436086@0] DMI not present or invalid. [ 0.436470@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444467@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451023@0] pinctrl core: initialized pinctrl subsystem [ 0.457585@0] NET: Registered protocol family 16 [ 0.476958@0] cpuidle: using governor menu [ 0.477098@0] register canvas platform driver [ 0.479834@0] register rdma platform driver [ 0.485278@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491642@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499135@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505222@0] clkmsr: clkmsr: driver init [ 0.508963@0] codec_mm_module_init [ 0.512394@0] media_configs_system_init [ 0.516529@0] aml_watch_point_probe, in, wp:2 [ 0.521199@0] pstore: using zlib compression [ 0.525454@0] console [pstore-1] enabled [ 0.528782@0] pstore: Registered ramoops as persistent store backend [ 0.535181@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549234@0] aml_iomap: amlogic iomap probe done [ 0.553920@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555831@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564819@0] audio_clocks: audio_clocks_probe done [ 0.573440@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573496@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578658@0] amlogic auge_snd_iomap probe done [ 0.858367@0] vgaarb: loaded [ 0.858755@0] SCSI subsystem initialized [ 0.859895@0] usbcore: registered new interface driver usbfs [ 0.865354@0] usbcore: registered new interface driver hub [ 0.870880@0] usbcore: registered new device driver usb [ 0.876161@0] Linux video capture interface: v2.00 [ 0.880920@0] pps_core: LinuxPPS API ver. 1 registered [ 0.885993@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.895400@0] PTP clock support registered [ 0.903697@0] dmi: Firmware registration failed. [ 0.904522@0] secmon: reserve_mem_size:0x300000 [ 0.908724@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915663@0] secmon: get page:ffffffbf00140000, 5000 [ 0.920368@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928758@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935496@0] fb: osd_init_module [ 0.939972@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.945577@0] Bluetooth: Core ver 2.22 [ 0.948677@0] NET: Registered protocol family 31 [ 0.953280@0] Bluetooth: HCI device and connection manager initialized [ 0.959840@0] Bluetooth: HCI socket layer initialized [ 0.964898@0] Bluetooth: L2CAP socket layer initialized [ 0.970223@0] Bluetooth: SCO socket layer initialized [ 0.979275@0] NetLabel: Initializing [ 0.979308@0] NetLabel: domain hash size = 128 [ 0.983362@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988595@0] NetLabel: unlabeled traffic allowed by default [ 0.995995@2] clocksource: Switched to clocksource arch_sys_counter [ 1.096647@2] VFS: Disk quotas dquot_6.6.0 [ 1.096753@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115672@2] NET: Registered protocol family 2 [ 1.116448@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121882@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.128558@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.135146@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.141104@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147762@2] NET: Registered protocol family 1 [ 1.152573@2] RPC: Registered named UNIX socket transport module. [ 1.158249@2] RPC: Registered udp transport module. [ 1.163129@2] RPC: Registered tcp transport module. [ 1.168029@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.176199@2] Unpacking initramfs... [ 1.277513@2] Freeing initrd memory: 2308K [ 1.278908@2] hw perfevents: clusterb_enabled = 0 [ 1.280861@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.285225@2] hw perfevents: cluster A irq = 7 [ 1.289738@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.299125@2] audit: initializing netlink subsys (disabled) [ 1.303266@2] audit: type=2000 audit(1.072:1): initialized [ 1.309887@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326952@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328971@1] NFS: Registering the id_resolver key type [ 1.332653@1] Key type id_resolver registered [ 1.337105@1] Key type id_legacy registered [ 1.341497@1] fuse init (API version 7.26) [ 1.350068@1] NET: Registered protocol family 38 [ 1.350113@1] Key type asymmetric registered [ 1.354220@1] Asymmetric key parser 'x509' registered [ 1.359559@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366935@1] io scheduler noop registered (default) [ 1.371880@1] io scheduler deadline registered [ 1.376591@1] io scheduler cfq registered [ 1.391591@1] Unable to detect cache hierarchy for CPU 0 [ 1.391768@1] random: fast init done [ 1.395152@1] random: crng init done [ 1.403835@2] loop: module loaded [ 1.408848@2] zram: Added device: zram0 [ 1.409316@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.414669@2] libphy: Fixed MDIO Bus: probed [ 1.418549@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.423250@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.430901@2] PPP generic driver version 2.4.2 [ 1.434389@2] PPP BSD Compression module registered [ 1.439012@2] PPP Deflate Compression module registered [ 1.444260@2] PPP MPPE Compression module registered [ 1.449225@2] NET: Registered protocol family 24 [ 1.454019@2] usbcore: registered new interface driver asix [ 1.459586@2] usbcore: registered new interface driver ax88179_178a [ 1.465859@2] usbcore: registered new interface driver cdc_ether [ 1.471875@2] usbcore: registered new interface driver net1080 [ 1.477741@2] usbcore: registered new interface driver cdc_subset [ 1.483863@2] usbcore: registered new interface driver zaurus [ 1.489672@2] usbcore: registered new interface driver cdc_ncm [ 1.496131@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.502172@2] ehci-pci: EHCI PCI platform driver [ 1.506913@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.513228@2] ohci-pci: OHCI PCI platform driver [ 1.518407@2] usbcore: registered new interface driver cdc_acm [ 1.523702@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.532040@2] usbcore: registered new interface driver usb-storage [ 1.538289@2] usbcore: registered new interface driver usbserial [ 1.544750@1] mousedev: PS/2 mouse device common for all mice [ 1.550333@1] usbcore: registered new interface driver xpad [ 1.555787@2] i2c /dev entries driver [ 1.559429@2] usbcore: registered new interface driver uvcvideo [ 1.565176@2] USB Video Class driver (1.1.1) [ 1.569455@2] md: linear personality registered for level -1 [ 1.575656@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.585266@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.591116@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.598881@1] usbcore: registered new interface driver usbhid [ 1.602832@1] usbhid: USB HID core driver [ 1.607069@0] ashmem: initialized [ 1.610582@1] logger: created 512K log 'log_main' [ 1.615070@0] logger: created 1K log 'log_events' [ 1.619779@1] logger: created 1K log 'log_radio' [ 1.624488@0] logger: created 16K log 'log_system' [ 1.629051@0] exFAT: Version 1.3.0 [ 1.634012@3] ff803000.serial: clock gate not found [ 1.637441@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.644585@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.659561@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.662173@3] console [ttyS0] enabled [ 1.662173@3] console [ttyS0] enabled [ 1.669398@3] bootconsole [aml_uart0] disabled [ 1.669398@3] bootconsole [aml_uart0] disabled [ 1.678858@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.685304@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.695582@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.705428@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.711917@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.724401@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.728405@0] irq = 20 [ 1.730726@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.739546@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.744013@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.749194@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.755658@0] meson-remote: Driver init [ 1.759623@0] meson-remote: remote_probe [ 1.763234@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.768288@0] meson-remote ff808040.rc: don't find the node [ 1.774851@0] meson-remote ff808040.rc: led_blink = 0 [ 1.779839@0] meson-remote ff808040.rc: don't find the node [ 1.786742@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.792379@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.798084@0] meson-remote ff808040.rc: custom_number = 3 [ 1.803399@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.809086@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.816239@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.822535@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.828684@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.834350@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.841508@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.847804@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.853949@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.859621@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.866779@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.873075@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.879204@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.885926@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.891704@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.897483@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.903176@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.908868@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.914819@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.920685@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.926290@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.931638@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.936986@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.943058@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.949987@2] meson-remote: IR XMP protocol handler initialized [ 1.955650@2] efusekeynum: 4 [ 1.958174@2] efusekeyname: mac offset: 0 size: 6 [ 1.964513@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.970893@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.977275@2] efusekeyname: usid offset: 18 size: 16 [ 1.983935@3] efuse efuse: probe OK! [ 1.989513@0] ge2d: ge2d_init_module [ 1.991233@0] [tsync_pcr_init]init success. [ 1.995787@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.002267@3] DI: di_module_init ok. [ 2.005395@3] dim:dim_module_init [ 2.008644@3] dim:dim_module_init finish [ 2.012304@3] dil:dil_init. [ 2.015227@3] dil:dil_init ok. [ 2.018138@3] vdin_drv_init: major 241 [ 2.022045@3] vdin_drv_init: vdin driver init done [ 2.026533@3] [viuin..]viuin_init_module viuin module init [ 2.032358@3] [viuin..]viuin_probe probe ok. [ 2.036459@3] amlvid:info: amlvideo_init called[ 2.040504@3] amlvid:info: amlvideo_create_instance called [ 2.045927@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.051263@2] amlvideo-000: V4L2 device registered as video10 [ 2.056720@2] amlvid:info: amlvideo_create_instance called [ 2.062139@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.067454@1] amlvideo-001: V4L2 device registered as video23 [ 2.073230@1] PPMGRDRV: warn: ppmgr module init func called [ 2.079356@1] videosync_create_instance dev_s ffffffc01c9a6c00,dev_s->dev ffffffc01da39780 [ 2.086663@1] videosync_create_instance reg videosync.0 [ 2.092089@1] aml_vecm_init:module init [ 2.092090@3] videosync_thread started [ 2.099659@1] amdolby_vision_init:module init [ 2.103938@1] prime_sl module init [ 2.107546@1] amlogic mtd driver init [ 2.111251@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.116499@1] bl mode descrete [ 2.119398@1] fip_copies 4 [ 2.122086@1] fip_size 0x200000 [ 2.125184@1] nand_clk_ctrl 0xffe07000 [ 2.128895@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.134523@1] nand_clk_ctrl 0xffe07000 [ 2.138225@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.146546@1] plat->aml_nand_device ffffff800a778cf8 [ 2.151081@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.157058@1] NAND device id: c2 dc 90 a2 57 3 [ 2.161243@1] NAND device: Manufacturer ID: [ 2.165291@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.171950@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.177451@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.182971@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.189281@1] mtd->oobavail: 0x10 [ 2.193193@2] aml_nand_init 2119: plat-name:bootloader [ 2.197652@2] Creating 1 MTD partitions on "bootloader": [ 2.202899@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.210742@0] bootloader initialized ok [ 2.212154@0] plat->aml_nand_device ffffff800a778cf8 [ 2.217043@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.223085@0] NAND device id: c2 dc 90 a2 57 3 [ 2.227223@0] NAND device: Manufacturer ID: [ 2.231272@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.237937@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.243433@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.248954@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.255257@0] mtd->oobavail: 0x10 [ 2.258713@0] aml_nand_init 2119: plat-name:nandnormal [ 2.263657@0] bbt_start=20 [ 2.266289@0] env_start=24 [ 2.268961@0] key_start=32 [ 2.271626@0] dtb_start=40 [ 2.274307@0] ddr_start=44 [ 2.276996@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.283464@0] get_free_node 43: bitmap=0 [ 2.286902@0] get_free_node 55: bitmap=1 [ 2.290986@0] get_free_node 43: bitmap=1 [ 2.294664@0] get_free_node 55: bitmap=3 [ 2.298749@0] get_free_node 43: bitmap=3 [ 2.302426@0] get_free_node 55: bitmap=7 [ 2.306308@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.312948@0] nbbt free list: [ 2.315873@0] blockN=21, ec=-1, dirty_flag=0 [ 2.320107@0] blockN=22, ec=-1, dirty_flag=0 [ 2.324333@0] blockN=23, ec=-1, dirty_flag=0 [ 2.328560@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.333968@0] nbbt valid addr: 500000 [ 2.337186@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.342791@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.349034@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.355444@0] get_free_node 43: bitmap=7 [ 2.358920@0] get_free_node 55: bitmap=f [ 2.363004@0] get_free_node 43: bitmap=f [ 2.366683@0] get_free_node 55: bitmap=1f [ 2.370852@0] get_free_node 43: bitmap=1f [ 2.374617@0] get_free_node 55: bitmap=3f [ 2.378787@0] get_free_node 43: bitmap=3f [ 2.382553@0] get_free_node 55: bitmap=7f [ 2.386722@0] get_free_node 43: bitmap=7f [ 2.390487@0] get_free_node 55: bitmap=ff [ 2.394657@0] get_free_node 43: bitmap=ff [ 2.398422@0] get_free_node 55: bitmap=1ff [ 2.402679@0] get_free_node 43: bitmap=1ff [ 2.406536@0] get_free_node 55: bitmap=3ff [ 2.410583@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.417224@0] nenv free list: [ 2.420157@0] blockN=25, ec=-1, dirty_flag=0 [ 2.424383@0] blockN=26, ec=-1, dirty_flag=0 [ 2.428609@0] blockN=27, ec=-1, dirty_flag=0 [ 2.432835@0] blockN=28, ec=-1, dirty_flag=0 [ 2.437062@0] blockN=29, ec=-1, dirty_flag=0 [ 2.441288@0] blockN=30, ec=-1, dirty_flag=0 [ 2.445514@0] blockN=31, ec=-1, dirty_flag=0 [ 2.449740@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.461482@0] nenv valid addr: 610000 [ 2.461502@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.465935@0] get_free_node 43: bitmap=3ff [ 2.469786@0] get_free_node 55: bitmap=7ff [ 2.474064@0] get_free_node 43: bitmap=7ff [ 2.477893@0] get_free_node 55: bitmap=fff [ 2.482150@0] get_free_node 43: bitmap=fff [ 2.486001@0] get_free_node 55: bitmap=1fff [ 2.490344@0] get_free_node 43: bitmap=1fff [ 2.494281@0] get_free_node 55: bitmap=3fff [ 2.498623@0] get_free_node 43: bitmap=3fff [ 2.502561@0] get_free_node 55: bitmap=7fff [ 2.506904@0] get_free_node 43: bitmap=7fff [ 2.510841@0] get_free_node 55: bitmap=ffff [ 2.515184@0] get_free_node 43: bitmap=ffff [ 2.519121@0] get_free_node 55: bitmap=1ffff [ 2.523550@0] get_free_node 43: bitmap=1ffff [ 2.527573@0] get_free_node 55: bitmap=3ffff [ 2.531799@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.538439@0] nkey free list: [ 2.541372@0] blockN=32, ec=-1, dirty_flag=0 [ 2.545599@0] blockN=33, ec=-1, dirty_flag=0 [ 2.549825@0] blockN=34, ec=-1, dirty_flag=0 [ 2.554051@0] blockN=35, ec=-1, dirty_flag=0 [ 2.558277@0] blockN=36, ec=-1, dirty_flag=0 [ 2.562504@0] blockN=37, ec=-1, dirty_flag=0 [ 2.566730@0] blockN=38, ec=-1, dirty_flag=0 [ 2.570956@0] blockN=39, ec=-1, dirty_flag=0 [ 2.575182@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.580271@0] nkey valid addr: fffffffffffc0000 [ 2.584762@0] aml_nand_key_check 1251 NO key exist [ 2.589501@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.596123@0] get_free_node 43: bitmap=3ffff [ 2.599929@0] get_free_node 55: bitmap=7ffff [ 2.604367@0] get_free_node 43: bitmap=7ffff [ 2.608391@0] get_free_node 55: bitmap=fffff [ 2.612818@0] get_free_node 43: bitmap=fffff [ 2.616842@0] get_free_node 55: bitmap=1fffff [ 2.621154@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.627794@0] ndtb free list: [ 2.630762@0] blockN=41, ec=-1, dirty_flag=0 [ 2.634954@0] blockN=42, ec=-1, dirty_flag=0 [ 2.639180@0] blockN=43, ec=-1, dirty_flag=0 [ 2.643406@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.661405@0] ndtb valid addr: a00000 [ 2.661425@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.665854@0] get_free_node 43: bitmap=1fffff [ 2.669964@0] get_free_node 55: bitmap=3fffff [ 2.674479@0] get_free_node 43: bitmap=3fffff [ 2.678588@0] get_free_node 55: bitmap=7fffff [ 2.682901@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.689541@0] nddr free list: [ 2.692474@0] blockN=44, ec=-1, dirty_flag=0 [ 2.696700@0] blockN=45, ec=-1, dirty_flag=0 [ 2.700926@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.706015@0] nddr valid addr: fffffffffffc0000 [ 2.710500@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.715251@0] tpl: off 16777216, size 8388608 [ 2.781541@0] Creating 7 MTD partitions on "nandnormal": [ 2.781571@0] 0x000001000000-0x000001800000 : "tpl" [ 2.789031@0] 0x000001800000-0x000001a00000 : "misc" [ 2.792369@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.797322@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.804441@1] 0x000002c00000-0x000003b00000 : "boot" [ 2.809106@1] 0x000003b00000-0x000015300000 : "system" [ 2.848116@1] 0x000015300000-0x000020000000 : "data" [ 2.871346@1] nandnormal initialized ok [ 2.871428@1] aml_ubootenv_init: register env chardev [ 2.874795@1] aml_ubootenv_init: register env chardev OK [ 2.880024@1] amlnf_dtb_init: register dtb cdev [ 2.884515@1] amlnf_dtb_init: register dtd cdev OK [ 2.889080@1] mtd_nand_probe 267 , err = 0 [ 2.893802@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.899402@1] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.906243@1] unifykey: storage in base: 0xffffffc005000000 [ 2.911161@1] unifykey: storage out base: 0xffffffc005040000 [ 2.916747@1] unifykey: storage block base: 0xffffffc005080000 [ 2.922521@1] unifykey: probe done! [ 2.926413@1] unifykey: no efuse-version set, use default value: -1 [ 2.932202@1] unifykey: key unify config unifykey-num is 6 [ 2.937664@1] unifykey: key unify fact unifykey-num is 6 [ 2.942880@1] unifykey: unifykey_devno: ee00000 [ 2.947644@1] unifykey: device unifykeys created ok [ 2.952275@1] unifykey: aml_unifykeys_init done! [ 2.957054@1] audio_dsp: [dsp]register dsp to char divece(257) [ 2.963406@1] amlkaraoke init success! [ 2.966551@1] sysled: module init [ 2.969928@1] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.974894@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.982001@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 2.988572@3] amlogic rfkill init [ 2.993172@0] dmc_monitor_probe [ 2.994934@0] page_trace_module_init, create sysfs failed [ 3.000654@0] defendkey defendkey: Reserved memory is not enough! [ 3.006160@0] defendkey: probe of defendkey failed with error -22 [ 3.013216@0] usbcore: registered new interface driver snd-usb-audio [ 3.022358@0] asoc debug: aml_audio_controller_probe-130 [ 3.024257@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.029533@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.037319@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.044520@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.050871@0] aml_tdm_platform_probe(), share en = 1[ 3.055606@0] No channel mask node Channel_Mask [ 3.060391@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.065920@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.073885@0] aml_tdm_platform_probe(), share en = 1[ 3.078382@0] No channel mask node Channel_Mask [ 3.083144@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.088690@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.096656@0] aml_tdm_platform_probe(), share en = 1[ 3.101155@0] No channel mask node Channel_Mask [ 3.106733@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.113804@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.121887@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.131795@0] Register vad [ 3.132977@0] check whether to update sound card init data [ 3.138778@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.145798@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.153070@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.158686@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.166352@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.173684@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.179555@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.186045@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.193096@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.199089@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.205988@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.211809@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.218577@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.227159@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.233442@1] snd_card_add_kcontrols card:ffffffc01c9e3018 [ 3.238401@1] effect_v2 is not init [ 3.241830@1] Failed to add VAD controls [ 3.246055@1] GACT probability NOT on [ 3.249355@1] Mirror/redirect action on [ 3.253123@1] u32 classifier [ 3.255954@1] Actions configured [ 3.259505@1] Netfilter messages via NETLINK v0.30. [ 3.264601@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.270783@1] ctnetlink v0.93: registering with nfnetlink. [ 3.276521@3] xt_time: kernel timezone is -0000 [ 3.280484@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.286661@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.291698@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.297250@3] Initializing XFRM netlink socket [ 3.302243@3] NET: Registered protocol family 10 [ 3.307645@3] mip6: Mobile IPv6 [ 3.309321@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.315108@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.322111@3] NET: Registered protocol family 17 [ 3.325452@3] NET: Registered protocol family 15 [ 3.330014@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.343128@3] Bluetooth: RFCOMM TTY layer initialized [ 3.348008@3] Bluetooth: RFCOMM socket layer initialized [ 3.353289@3] Bluetooth: RFCOMM ver 1.11 [ 3.357149@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.362568@3] Bluetooth: BNEP filters: protocol multicast [ 3.367926@3] Bluetooth: BNEP socket layer initialized [ 3.373005@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.379054@3] Bluetooth: HIDP socket layer initialized [ 3.384214@3] l2tp_core: L2TP core driver, V2.0 [ 3.388632@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.393534@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.399261@3] l2tp_netlink: L2TP netlink interface [ 3.404043@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.410055@3] l2tp_debugfs: L2TP debugfs support [ 3.414579@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.421189@3] NET: Registered protocol family 35 [ 3.425945@3] Key type dns_resolver registered [ 3.431112@3] Registered swp emulation handler [ 3.434594@3] Registered cp15_barrier emulation handler [ 3.439686@3] Registered setend emulation handler [ 3.444400@3] disable EAS feature [ 3.448499@2] registered taskstats version 1 [ 3.461262@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.967502@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.967559@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.975711@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.984179@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 3.991018@2] hub 1-0:1.0: USB hub found [ 3.994099@2] hub 1-0:1.0: 1 port detected [ 3.998451@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.003689@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.011507@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.020428@1] hub 2-0:1.0: USB hub found [ 4.023546@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.030871@1] usb usb2: Unsupported the hub [ 4.035317@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.043429@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.151965@1] dwc_otg: Core Release: 3.10a [ 4.152021@1] dwc_otg: Setting default values for core params [ 4.156152@1] dwc_otg: curmode: 0, host_only: 0 [ 4.172952@1] dwc_otg: Using Buffer DMA mode [ 4.172977@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.176855@1] dwc_otg: Working on port type = SLAVE [ 4.181688@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.188880@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.197855@0] gxbb_pm: enter meson_pm_probe! [ 4.197892@0] no vddio3v3_en pin[ 4.199530@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.204598@0] gxbb_pm: meson_pm_probe done [ 4.20894Y 4.215236@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.220637@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.429078@1] ubi0: attaching mtd6 [ 4.957509@1] ubi0: scanning is finished [ 4.961606@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.961892@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.968905@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.975788@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.982853@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 4.989067@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.996395@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.005626@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.015036@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.020791@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.065642@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.067576@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.077609@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.088367@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.094317@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.277404@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.338232@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.421873@3] ubi1: attaching mtd7 [ 5.748472@3] ubi1: scanning is finished [ 5.752388@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.752502@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.759516@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.766394@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.773477@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.779594@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.786921@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.796152@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.805474@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.814663@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.838468@1] UBIFS (ubi1:0): recovery needed [ 5.912709@0] UBIFS (ubi1:0): recovery completed [ 5.912863@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.919049@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.929044@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.939737@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.946466@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 OK skip network Init because /sys/class/net/eth0 is not exist AudioStream init success AudioStream_open pid:2125, tid:f2b17450 --- 0 [ 6.977560@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 6.979232@1] aml_tdm_open [ 6.982463@0] cpufreq_interactive: no need to active hmp boost! [ 6.987078@1] asoc-aml-card auge_sound: tdm prepare capture [ 6.987083@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.988286@1] aml_tdm_open [ 6.988292@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.084259@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.087816@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.093899@0] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.142724@0] asoc-aml-card auge_sound: tdm playback enable [ 7.273302@3] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894057 [ 7.273698@3] asoc-aml-card auge_sound: tdm capture stop [ 7.279102@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.284507@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.290545@0] asoc-aml-card auge_sound: tdm capture enable [ 7.302976@2] asoc-aml-card auge_sound: tdm playback stop [ 7.348975@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.688149@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.288780@1] asoc-aml-card auge_sound: tdm playback stop [ 14.289100@2] asoc-aml-card auge_sound: tdm capture stop [ 14.293908@2] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.285165@2] mtd_nand_reboot_notifier 35 [ 16.285428@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.293600@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.297106@2] usb usb2: USB disconnect, device number 1 [ 16.306523@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.307676@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.312849@1] usb usb1: USB disconnect, device number 1 [ 16.318752@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.340004@0] reboot: Restarting system [ 16.340236@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22028 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 26 0c 40 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015843 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976121 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016834@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036441@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056092@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209575@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210386@0] CPU0: update cpu_capacity 1024 [ 0.214712@0] ASID allocator initialised with 32768 entries [ 0.252691@0] secmon: can't fine clear_range [ 0.253277@0] EFI services will not be available. [ 0.256116@0] Meson chip version = RevC (25:C - 43:0) [ 0.290049@1] Detected VIPT I-cache on CPU1 [ 0.290110@1] CPU1: update cpu_capacity 1024 [ 0.290112@1] CPU1: Booted secondary processor [410fd034] [ 0.318100@2] Detected VIPT I-cache on CPU2 [ 0.318155@2] CPU2: update cpu_capacity 1024 [ 0.318157@2] CPU2: Booted secondary processor [410fd034] [ 0.346165@3] Detected VIPT I-cache on CPU3 [ 0.346214@3] CPU3: update cpu_capacity 1024 [ 0.346217@3] CPU3: Booted secondary processor [410fd034] [ 0.346309@0] Brought up 4 CPUs [ 0.385524@0] SMP: Total of 4 processors activated. [ 0.390435@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396470@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407428@0] CPU: All CPU(s) started at EL2 [ 0.408209@0] alternatives: patching kernel code [ 0.413618@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420747@0] devtmpfs: initialized [ 0.436179@0] DMI not present or invalid. [ 0.436564@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444560@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451121@0] pinctrl core: initialized pinctrl subsystem [ 0.457713@0] NET: Registered protocol family 16 [ 0.477050@0] cpuidle: using governor menu [ 0.477187@0] register canvas platform driver [ 0.479921@0] register rdma platform driver [ 0.485366@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491740@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499202@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505323@0] clkmsr: clkmsr: driver init [ 0.509058@0] codec_mm_module_init [ 0.512487@0] media_configs_system_init [ 0.516624@0] aml_watch_point_probe, in, wp:2 [ 0.522145@0] pstore: using zlib compression [ 0.525550@0] console [pstore-1] enabled [ 0.528877@0] pstore: Registered ramoops as persistent store backend [ 0.535289@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549334@0] aml_iomap: amlogic iomap probe done [ 0.553999@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555935@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564920@0] audio_clocks: audio_clocks_probe done [ 0.573553@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573607@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578771@0] amlogic auge_snd_iomap probe done [ 0.853847@0] vgaarb: loaded [ 0.854252@0] SCSI subsystem initialized [ 0.855365@0] usbcore: registered new interface driver usbfs [ 0.860837@0] usbcore: registered new interface driver hub [ 0.866359@0] usbcore: registered new device driver usb [ 0.871645@0] Linux video capture interface: v2.00 [ 0.876388@0] pps_core: LinuxPPS API ver. 1 registered [ 0.881478@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.890852@0] PTP clock support registered [ 0.899195@0] dmi: Firmware registration failed. [ 0.899984@0] secmon: reserve_mem_size:0x300000 [ 0.904198@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.911094@0] secmon: get page:ffffffbf00140000, 5000 [ 0.915841@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924231@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.930969@0] fb: osd_init_module [ 0.935426@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.941053@0] Bluetooth: Core ver 2.22 [ 0.944150@0] NET: Registered protocol family 31 [ 0.948757@0] Bluetooth: HCI device and connection manager initialized [ 0.955307@0] Bluetooth: HCI socket layer initialized [ 0.960380@0] Bluetooth: L2CAP socket layer initialized [ 0.965687@0] Bluetooth: SCO socket layer initialized [ 0.974772@0] NetLabel: Initializing [ 0.974806@0] NetLabel: domain hash size = 128 [ 0.978838@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.984073@0] NetLabel: unlabeled traffic allowed by default [ 0.991498@1] clocksource: Switched to clocksource arch_sys_counter [ 1.092012@1] VFS: Disk quotas dquot_6.6.0 [ 1.092118@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.110985@2] NET: Registered protocol family 2 [ 1.111773@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.117196@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.123878@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.130436@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.136406@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.143071@2] NET: Registered protocol family 1 [ 1.147916@2] RPC: Registered named UNIX socket transport module. [ 1.153551@2] RPC: Registered udp transport module. [ 1.158439@2] RPC: Registered tcp transport module. [ 1.163337@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.171409@2] Unpacking initramfs... [ 1.272969@2] Freeing initrd memory: 2308K [ 1.274400@2] hw perfevents: clusterb_enabled = 0 [ 1.276233@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.280752@2] hw perfevents: cluster A irq = 7 [ 1.285231@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.294563@2] audit: initializing netlink subsys (disabled) [ 1.298730@2] audit: type=2000 audit(1.068:1): initialized [ 1.305370@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.326290@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328270@2] NFS: Registering the id_resolver key type [ 1.331984@2] Key type id_resolver registered [ 1.336314@2] Key type id_legacy registered [ 1.340838@2] fuse init (API version 7.26) [ 1.349372@2] NET: Registered protocol family 38 [ 1.349417@2] Key type asymmetric registered [ 1.353558@2] Asymmetric key parser 'x509' registered [ 1.358906@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.366286@2] io scheduler noop registered (default) [ 1.371223@2] io scheduler deadline registered [ 1.375947@2] io scheduler cfq registered [ 1.390709@1] random: fast init done [ 1.390775@1] random: crng init done [ 1.391256@2] Unable to detect cache hierarchy for CPU 0 [ 1.419430@2] loop: module loaded [ 1.420399@2] zram: Added device: zram0 [ 1.421376@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.428498@2] libphy: Fixed MDIO Bus: probed [ 1.432441@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.437188@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.444735@2] PPP generic driver version 2.4.2 [ 1.448287@2] PPP BSD Compression module registered [ 1.452904@2] PPP Deflate Compression module registered [ 1.458161@2] PPP MPPE Compression module registered [ 1.463125@2] NET: Registered protocol family 24 [ 1.467922@2] usbcore: registered new interface driver asix [ 1.473491@2] usbcore: registered new interface driver ax88179_178a [ 1.479750@2] usbcore: registered new interface driver cdc_ether [ 1.485781@2] usbcore: registered new interface driver net1080 [ 1.491642@2] usbcore: registered new interface driver cdc_subset [ 1.497775@2] usbcore: registered new interface driver zaurus [ 1.503588@2] usbcore: registered new interface driver cdc_ncm [ 1.510005@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.516100@2] ehci-pci: EHCI PCI platform driver [ 1.520816@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.527166@2] ohci-pci: OHCI PCI platform driver [ 1.532316@2] usbcore: registered new interface driver cdc_acm [ 1.537618@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.545917@2] usbcore: registered new interface driver usb-storage [ 1.552195@2] usbcore: registered new interface driver usbserial [ 1.558677@1] mousedev: PS/2 mouse device common for all mice [ 1.564227@1] usbcore: registered new interface driver xpad [ 1.569708@2] i2c /dev entries driver [ 1.573292@2] usbcore: registered new interface driver uvcvideo [ 1.579085@2] USB Video Class driver (1.1.1) [ 1.583366@2] md: linear personality registered for level -1 [ 1.589546@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.599172@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.605014@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.612797@1] usbcore: registered new interface driver usbhid [ 1.616719@1] usbhid: USB HID core driver [ 1.620971@0] ashmem: initialized [ 1.624465@1] logger: created 512K log 'log_main' [ 1.628979@0] logger: created 1K log 'log_events' [ 1.633681@0] logger: created 1K log 'log_radio' [ 1.638317@0] logger: created 16K log 'log_system' [ 1.642957@0] exFAT: Version 1.3.0 [ 1.648238@0] ff803000.serial: clock gate not found [ 1.651294@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.658501@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.673466@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.676049@0] console [ttyS0] enabled [ 1.676049@0] console [ttyS0] enabled [ 1.683260@0] bootconsole [aml_uart0] disabled [ 1.683260@0] bootconsole [aml_uart0] disabled [ 1.692779@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.699224@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.709516@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.719299@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.725817@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.738218@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.742310@3] irq = 20 [ 1.744645@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.753495@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.757873@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.763076@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.769565@3] meson-remote: Driver init [ 1.773521@3] meson-remote: remote_probe [ 1.777155@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.782193@3] meson-remote ff808040.rc: don't find the node [ 1.788747@3] meson-remote ff808040.rc: led_blink = 0 [ 1.793744@3] meson-remote ff808040.rc: don't find the node [ 1.800647@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.806283@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.811987@3] meson-remote ff808040.rc: custom_number = 3 [ 1.817303@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.822987@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.830142@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.836438@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.842583@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.848254@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.855411@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.861707@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.867852@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.873525@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.880682@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.886978@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.893108@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.899830@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.905608@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.911386@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.917079@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.922772@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.928723@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.934588@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.940194@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.945542@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.950889@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.956908@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.963902@2] meson-remote: IR XMP protocol handler initialized [ 1.969546@2] efusekeynum: 4 [ 1.972054@2] efusekeyname: mac offset: 0 size: 6 [ 1.978414@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.984795@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.991177@2] efusekeyname: usid offset: 18 size: 16 [ 1.997841@3] efuse efuse: probe OK! [ 2.003545@2] ge2d: ge2d_init_module [ 2.005162@2] [tsync_pcr_init]init success. [ 2.009697@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.016147@3] DI: di_module_init ok. [ 2.019227@3] dim:dim_module_init [ 2.022553@3] dim:dim_module_init finish [ 2.026258@3] dil:dil_init. [ 2.029178@3] dil:dil_init ok. [ 2.032048@3] vdin_drv_init: major 241 [ 2.035951@3] vdin_drv_init: vdin driver init done [ 2.040444@3] [viuin..]viuin_init_module viuin module init [ 2.046266@3] [viuin..]viuin_probe probe ok. [ 2.050360@3] amlvid:info: amlvideo_init called[ 2.054415@3] amlvid:info: amlvideo_create_instance called [ 2.059826@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.065178@2] amlvideo-000: V4L2 device registered as video10 [ 2.070629@2] amlvid:info: amlvideo_create_instance called [ 2.076046@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.081366@0] amlvideo-001: V4L2 device registered as video23 [ 2.087132@0] PPMGRDRV: warn: ppmgr module init func called [ 2.093326@0] videosync_create_instance dev_s ffffffc01c9f4800,dev_s->dev ffffffc01c98aa00 [ 2.100565@0] videosync_create_instance reg videosync.0 [ 2.105804@0] aml_vecm_init:module init [ 2.105805@3] videosync_thread started [ 2.113544@0] amdolby_vision_init:module init [ 2.117859@0] prime_sl module init [ 2.121471@0] amlogic mtd driver init [ 2.125194@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.130387@0] bl mode descrete [ 2.133314@0] fip_copies 4 [ 2.135983@0] fip_size 0x200000 [ 2.139078@0] nand_clk_ctrl 0xffe07000 [ 2.142797@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.148427@0] nand_clk_ctrl 0xffe07000 [ 2.152127@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.160450@0] plat->aml_nand_device ffffff800a778cf8 [ 2.164969@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.170950@0] NAND device id: c2 dc 90 a2 57 3 [ 2.175146@0] NAND device: Manufacturer ID: [ 2.179194@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.185854@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.191354@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.196875@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.203192@0] mtd->oobavail: 0x10 [ 2.206798@2] aml_nand_init 2119: plat-name:bootloader [ 2.211556@2] Creating 1 MTD partitions on "bootloader": [ 2.216810@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.224228@3] bootloader initialized ok [ 2.226027@3] plat->aml_nand_device ffffff800a778cf8 [ 2.230975@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.236991@3] NAND device id: c2 dc 90 a2 57 3 [ 2.241127@3] NAND device: Manufacturer ID: [ 2.245175@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.251839@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.257335@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.262863@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.269158@3] mtd->oobavail: 0x10 [ 2.272594@3] aml_nand_init 2119: plat-name:nandnormal [ 2.277542@3] bbt_start=20 [ 2.280192@3] env_start=24 [ 2.282856@3] key_start=32 [ 2.285538@3] dtb_start=40 [ 2.288211@3] ddr_start=44 [ 2.290879@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.297356@3] get_free_node 43: bitmap=0 [ 2.300806@3] get_free_node 55: bitmap=1 [ 2.304889@3] get_free_node 43: bitmap=1 [ 2.308568@3] get_free_node 55: bitmap=3 [ 2.312652@3] get_free_node 43: bitmap=3 [ 2.316330@3] get_free_node 55: bitmap=7 [ 2.320211@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.326851@3] nbbt free list: [ 2.329784@3] blockN=21, ec=-1, dirty_flag=0 [ 2.334010@3] blockN=22, ec=-1, dirty_flag=0 [ 2.338236@3] blockN=23, ec=-1, dirty_flag=0 [ 2.342463@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.347879@3] nbbt valid addr: 500000 [ 2.351081@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.356696@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.362937@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.369347@3] get_free_node 43: bitmap=7 [ 2.372824@3] get_free_node 55: bitmap=f [ 2.376907@3] get_free_node 43: bitmap=f [ 2.380586@3] get_free_node 55: bitmap=1f [ 2.384756@3] get_free_node 43: bitmap=1f [ 2.388521@3] get_free_node 55: bitmap=3f [ 2.392691@3] get_free_node 43: bitmap=3f [ 2.396456@3] get_free_node 55: bitmap=7f [ 2.400627@3] get_free_node 43: bitmap=7f [ 2.404391@3] get_free_node 55: bitmap=ff [ 2.408561@3] get_free_node 43: bitmap=ff [ 2.412326@3] get_free_node 55: bitmap=1ff [ 2.416582@3] get_free_node 43: bitmap=1ff [ 2.420432@3] get_free_node 55: bitmap=3ff [ 2.424487@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.431127@3] nenv free list: [ 2.434060@3] blockN=25, ec=-1, dirty_flag=0 [ 2.438287@3] blockN=26, ec=-1, dirty_flag=0 [ 2.442512@3] blockN=27, ec=-1, dirty_flag=0 [ 2.446739@3] blockN=28, ec=-1, dirty_flag=0 [ 2.450965@3] blockN=29, ec=-1, dirty_flag=0 [ 2.455191@3] blockN=30, ec=-1, dirty_flag=0 [ 2.459418@3] blockN=31, ec=-1, dirty_flag=0 [ 2.463644@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.475383@3] nenv valid addr: 610000 [ 2.475402@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.479839@3] get_free_node 43: bitmap=3ff [ 2.483689@3] get_free_node 55: bitmap=7ff [ 2.487946@3] get_free_node 43: bitmap=7ff [ 2.491797@3] get_free_node 55: bitmap=fff [ 2.496053@3] get_free_node 43: bitmap=fff [ 2.499904@3] get_free_node 55: bitmap=1fff [ 2.504247@3] get_free_node 43: bitmap=1fff [ 2.508184@3] get_free_node 55: bitmap=3fff [ 2.512527@3] get_free_node 43: bitmap=3fff [ 2.516469@3] get_free_node 55: bitmap=7fff [ 2.520807@3] get_free_node 43: bitmap=7fff [ 2.524744@3] get_free_node 55: bitmap=ffff [ 2.529087@3] get_free_node 43: bitmap=ffff [ 2.533024@3] get_free_node 55: bitmap=1ffff [ 2.537453@3] get_free_node 43: bitmap=1ffff [ 2.541477@3] get_free_node 55: bitmap=3ffff [ 2.545703@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.552343@3] nkey free list: [ 2.555268@3] blockN=32, ec=-1, dirty_flag=0 [ 2.559502@3] blockN=33, ec=-1, dirty_flag=0 [ 2.563728@3] blockN=34, ec=-1, dirty_flag=0 [ 2.567954@3] blockN=35, ec=-1, dirty_flag=0 [ 2.572181@3] blockN=36, ec=-1, dirty_flag=0 [ 2.576407@3] blockN=37, ec=-1, dirty_flag=0 [ 2.580633@3] blockN=38, ec=-1, dirty_flag=0 [ 2.584860@3] blockN=39, ec=-1, dirty_flag=0 [ 2.589086@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.594174@3] nkey valid addr: fffffffffffc0000 [ 2.598665@3] aml_nand_key_check 1251 NO key exist [ 2.603404@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.610019@3] get_free_node 43: bitmap=3ffff [ 2.613841@3] get_free_node 55: bitmap=7ffff [ 2.618268@3] get_free_node 43: bitmap=7ffff [ 2.622293@3] get_free_node 55: bitmap=fffff [ 2.626721@3] get_free_node 43: bitmap=fffff [ 2.630757@3] get_free_node 55: bitmap=1fffff [ 2.635059@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.641698@3] ndtb free list: [ 2.644631@3] blockN=41, ec=-1, dirty_flag=0 [ 2.648857@3] blockN=42, ec=-1, dirty_flag=0 [ 2.653083@3] blockN=43, ec=-1, dirty_flag=0 [ 2.657310@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.675299@3] ndtb valid addr: a00000 [ 2.675319@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.679749@3] get_free_node 43: bitmap=1fffff [ 2.683858@3] get_free_node 55: bitmap=3fffff [ 2.688374@3] get_free_node 43: bitmap=3fffff [ 2.692483@3] get_free_node 55: bitmap=7fffff [ 2.696795@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.703436@3] nddr free list: [ 2.706368@3] blockN=44, ec=-1, dirty_flag=0 [ 2.710595@3] blockN=45, ec=-1, dirty_flag=0 [ 2.714821@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.719910@3] nddr valid addr: fffffffffffc0000 [ 2.724395@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.729141@3] tpl: off 16777216, size 8388608 [ 2.795497@3] Creating 7 MTD partitions on "nandnormal": [ 2.795526@3] 0x000001000000-0x000001800000 : "tpl" [ 2.802850@3] 0x000001800000-0x000001a00000 : "misc" [ 2.806791@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.811392@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.818590@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.823075@2] 0x000003b00000-0x000015300000 : "system" [ 2.862110@2] 0x000015300000-0x000020000000 : "data" [ 2.885368@2] nandnormal initialized ok [ 2.885448@2] aml_ubootenv_init: register env chardev [ 2.888822@2] aml_ubootenv_init: register env chardev OK [ 2.894039@2] amlnf_dtb_init: register dtb cdev [ 2.898557@2] amlnf_dtb_init: register dtd cdev OK [ 2.903109@2] mtd_nand_probe 267 , err = 0 [ 2.907850@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.913433@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.920269@2] unifykey: storage in base: 0xffffffc005000000 [ 2.925183@2] unifykey: storage out base: 0xffffffc005040000 [ 2.930772@2] unifykey: storage block base: 0xffffffc005080000 [ 2.936543@2] unifykey: probe done! [ 2.940461@2] unifykey: no efuse-version set, use default value: -1 [ 2.946218@2] unifykey: key unify config unifykey-num is 6 [ 2.951686@2] unifykey: key unify fact unifykey-num is 6 [ 2.956903@2] unifykey: unifykey_devno: ee00000 [ 2.961660@2] unifykey: device unifykeys created ok [ 2.966297@2] unifykey: aml_unifykeys_init done! [ 2.971085@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.977430@2] amlkaraoke init success! [ 2.980570@2] sysled: module init [ 2.983952@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.988919@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.996020@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.002571@2] amlogic rfkill init [ 3.007203@2] dmc_monitor_probe [ 3.008999@2] page_trace_module_init, create sysfs failed [ 3.014616@2] defendkey defendkey: Reserved memory is not enough! [ 3.020159@2] defendkey: probe of defendkey failed with error -22 [ 3.027154@2] usbcore: registered new interface driver snd-usb-audio [ 3.036405@2] asoc debug: aml_audio_controller_probe-130 [ 3.038244@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.043630@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.051363@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.058522@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.064895@2] aml_tdm_platform_probe(), share en = 1[ 3.069634@2] No channel mask node Channel_Mask [ 3.074415@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.079945@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.087900@2] aml_tdm_platform_probe(), share en = 1[ 3.092411@2] No channel mask node Channel_Mask [ 3.097142@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.102709@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.110648@2] aml_tdm_platform_probe(), share en = 1[ 3.115172@2] No channel mask node Channel_Mask [ 3.120769@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.127828@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.135911@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.145783@2] Register vad [ 3.146942@2] check whether to update sound card init data [ 3.152804@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.159780@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.167098@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.172705@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.180380@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.187704@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.193580@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.200064@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.207186@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.213118@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.220061@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.225830@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.232570@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.240578@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.247371@3] snd_card_add_kcontrols card:ffffffc01c90f818 [ 3.252426@3] effect_v2 is not init [ 3.255849@3] Failed to add VAD controls [ 3.260111@3] GACT probability NOT on [ 3.263353@3] Mirror/redirect action on [ 3.267194@3] u32 classifier [ 3.269994@3] Actions configured [ 3.273529@3] Netfilter messages via NETLINK v0.30. [ 3.278624@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.284806@3] ctnetlink v0.93: registering with nfnetlink. [ 3.290530@1] xt_time: kernel timezone is -0000 [ 3.294513@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.300685@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.305697@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.311282@1] Initializing XFRM netlink socket [ 3.316276@1] NET: Registered protocol family 10 [ 3.321454@1] mip6: Mobile IPv6 [ 3.323314@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.329160@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.336212@1] NET: Registered protocol family 17 [ 3.339443@1] NET: Registered protocol family 15 [ 3.344063@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.357140@1] Bluetooth: RFCOMM TTY layer initialized [ 3.362035@1] Bluetooth: RFCOMM socket layer initialized [ 3.367340@1] Bluetooth: RFCOMM ver 1.11 [ 3.371170@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.376596@1] Bluetooth: BNEP filters: protocol multicast [ 3.381949@1] Bluetooth: BNEP socket layer initialized [ 3.387032@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.393073@1] Bluetooth: HIDP socket layer initialized [ 3.398248@1] l2tp_core: L2TP core driver, V2.0 [ 3.402656@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.407556@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.413283@1] l2tp_netlink: L2TP netlink interface [ 3.418041@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.424064@1] l2tp_debugfs: L2TP debugfs support [ 3.428603@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.435202@1] NET: Registered protocol family 35 [ 3.439972@1] Key type dns_resolver registered [ 3.445138@1] Registered swp emulation handler [ 3.448605@1] Registered cp15_barrier emulation handler [ 3.453770@1] Registered setend emulation handler [ 3.458425@1] disable EAS feature [ 3.462757@3] registered taskstats version 1 [ 3.475305@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.981530@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.981589@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.989728@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.998204@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.005093@0] hub 1-0:1.0: USB hub found [ 4.008117@0] hub 1-0:1.0: 1 port detected [ 4.012448@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.017714@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.025534@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.034442@1] hub 2-0:1.0: USB hub found [ 4.037630@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.044893@1] usb usb2: Unsupported the hub [ 4.049331@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.057430@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.165987@2] dwc_otg: Core Release: 3.10a [ 4.166062@2] dwc_otg: Setting default values for core params [ 4.170193@2] dwc_otg: curmode: 0, host_only: 0 [ 4.186984@2] dwc_otg: Using Buffer DMA mode [ 4.187006@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.190888@2] dwc_otg: Working on port type = SLAVE [ 4.195720@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.202756@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.211971@0] gxbb_pm: enter meson_pm_probe! [ 4.212010@0] no vddio3v3_en pin[ 4.213648@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.218711@0] gxbb_pm: meson_pm_probe done [ 4.22309V 4.229356@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.234765@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.444964@1] ubi0: attaching mtd6 [ 4.973273@1] ubi0: scanning is finished [ 4.977739@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.978028@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.985037@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.991924@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.998991@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.005206@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.012532@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.021764@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.031257@1] ubi0: background thread "ubi_bgt0d" started, PID 2004 [ 5.036854@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2007 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.081595@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.083549@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.093536@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.104311@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.110264@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.292083@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.355538@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.440876@0] ubi1: attaching mtd7 [ 5.767358@0] ubi1: scanning is finished [ 5.771153@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.771356@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.778367@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.785253@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.792318@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.798445@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.805773@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.815005@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.824342@1] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.833566@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.857222@3] UBIFS (ubi1:0): recovery needed [ 5.933112@2] UBIFS (ubi1:0): recovery completed [ 5.933265@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.939450@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.949451@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.960143@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.966874@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f2ad7450 --- 0 [ 6.996226@3] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.006446@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.006486@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.013487@3] aml_tdm_open [ 7.014670@3] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.029583@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.031613@0] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.112808@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.116463@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.122745@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.171627@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687638@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21937 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015886 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976333 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016841@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129129@0] ftrace: allocating 43519 entries in 170 pages [ 0.209423@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210238@0] CPU0: update cpu_capacity 1024 [ 0.214564@0] ASID allocator initialised with 32768 entries [ 0.252549@0] secmon: can't fine clear_range [ 0.253146@0] EFI services will not be available. [ 0.255979@0] Meson chip version = RevC (25:C - 43:0) [ 0.289908@1] Detected VIPT I-cache on CPU1 [ 0.289969@1] CPU1: update cpu_capacity 1024 [ 0.289971@1] CPU1: Booted secondary processor [410fd034] [ 0.317970@2] Detected VIPT I-cache on CPU2 [ 0.318023@2] CPU2: update cpu_capacity 1024 [ 0.318026@2] CPU2: Booted secondary processor [410fd034] [ 0.346033@3] Detected VIPT I-cache on CPU3 [ 0.346083@3] CPU3: update cpu_capacity 1024 [ 0.346085@3] CPU3: Booted secondary processor [410fd034] [ 0.346174@0] Brought up 4 CPUs [ 0.385394@0] SMP: Total of 4 processors activated. [ 0.390303@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396339@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407298@0] CPU: All CPU(s) started at EL2 [ 0.408079@0] alternatives: patching kernel code [ 0.413482@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420615@0] devtmpfs: initialized [ 0.436044@0] DMI not present or invalid. [ 0.436422@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444422@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.450982@0] pinctrl core: initialized pinctrl subsystem [ 0.457549@0] NET: Registered protocol family 16 [ 0.484971@3] cpuidle: using governor menu [ 0.485118@3] register canvas platform driver [ 0.487840@3] register rdma platform driver [ 0.493286@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499652@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507132@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513260@3] clkmsr: clkmsr: driver init [ 0.516964@3] codec_mm_module_init [ 0.520406@3] media_configs_system_init [ 0.524538@3] aml_watch_point_probe, in, wp:2 [ 0.529187@3] pstore: using zlib compression [ 0.533462@3] console [pstore-1] enabled [ 0.536796@3] pstore: Registered ramoops as persistent store backend [ 0.543205@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557262@3] aml_iomap: amlogic iomap probe done [ 0.561972@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563863@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572832@3] audio_clocks: audio_clocks_probe done [ 0.581514@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581571@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586733@3] amlogic auge_snd_iomap probe done [ 0.865380@3] vgaarb: loaded [ 0.865768@3] SCSI subsystem initialized [ 0.866903@3] usbcore: registered new interface driver usbfs [ 0.872362@3] usbcore: registered new interface driver hub [ 0.877894@3] usbcore: registered new device driver usb [ 0.883161@3] Linux video capture interface: v2.00 [ 0.887932@3] pps_core: LinuxPPS API ver. 1 registered [ 0.892994@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902379@3] PTP clock support registered [ 0.906874@3] dmi: Firmware registration failed. [ 0.915403@3] secmon: reserve_mem_size:0x300000 [ 0.915696@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.922672@3] secmon: get page:ffffffbf00140000, 5000 [ 0.927377@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.935768@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942497@3] fb: osd_init_module [ 0.947017@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.952556@3] Bluetooth: Core ver 2.22 [ 0.955683@3] NET: Registered protocol family 31 [ 0.960288@3] Bluetooth: HCI device and connection manager initialized [ 0.966838@3] Bluetooth: HCI socket layer initialized [ 0.971910@3] Bluetooth: L2CAP socket layer initialized [ 0.977206@3] Bluetooth: SCO socket layer initialized [ 0.990285@3] NetLabel: Initializing [ 0.990319@3] NetLabel: domain hash size = 128 [ 0.992757@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.998008@3] NetLabel: unlabeled traffic allowed by default [ 1.005409@1] clocksource: Switched to clocksource arch_sys_counter [ 1.105957@1] VFS: Disk quotas dquot_6.6.0 [ 1.106063@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.124770@1] NET: Registered protocol family 2 [ 1.125536@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.131003@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.137662@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.144245@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.150215@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.156859@1] NET: Registered protocol family 1 [ 1.161777@1] RPC: Registered named UNIX socket transport module. [ 1.167351@1] RPC: Registered udp transport module. [ 1.172229@1] RPC: Registered tcp transport module. [ 1.177128@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.185199@1] Unpacking initramfs... [ 1.286791@1] Freeing initrd memory: 2308K [ 1.288218@1] hw perfevents: clusterb_enabled = 0 [ 1.290144@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.294509@1] hw perfevents: cluster A irq = 7 [ 1.299022@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.308386@1] audit: initializing netlink subsys (disabled) [ 1.312552@1] audit: type=2000 audit(1.156:1): initialized [ 1.319211@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.340099@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.342093@1] NFS: Registering the id_resolver key type [ 1.345781@1] Key type id_resolver registered [ 1.350113@1] Key type id_legacy registered [ 1.354624@1] fuse init (API version 7.26) [ 1.363390@1] NET: Registered protocol family 38 [ 1.363434@1] Key type asymmetric registered [ 1.367368@1] Asymmetric key parser 'x509' registered [ 1.372711@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.380059@1] io scheduler noop registered (default) [ 1.385031@1] io scheduler deadline registered [ 1.389784@1] io scheduler cfq registered [ 1.404417@3] random: fast init done [ 1.404484@3] random: crng init done [ 1.404974@1] Unable to detect cache hierarchy for CPU 0 [ 1.433003@1] loop: module loaded [ 1.438003@1] zram: Added device: zram0 [ 1.438421@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.443904@1] libphy: Fixed MDIO Bus: probed [ 1.447690@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.452411@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.459989@1] PPP generic driver version 2.4.2 [ 1.463535@1] PPP BSD Compression module registered [ 1.468158@1] PPP Deflate Compression module registered [ 1.473435@1] PPP MPPE Compression module registered [ 1.478377@1] NET: Registered protocol family 24 [ 1.483157@1] usbcore: registered new interface driver asix [ 1.488751@1] usbcore: registered new interface driver ax88179_178a [ 1.495019@1] usbcore: registered new interface driver cdc_ether [ 1.501040@1] usbcore: registered new interface driver net1080 [ 1.506905@1] usbcore: registered new interface driver cdc_subset [ 1.513022@1] usbcore: registered new interface driver zaurus [ 1.518831@1] usbcore: registered new interface driver cdc_ncm [ 1.525248@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.531344@1] ehci-pci: EHCI PCI platform driver [ 1.536065@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.542384@1] ohci-pci: OHCI PCI platform driver [ 1.547576@1] usbcore: registered new interface driver cdc_acm [ 1.552858@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.561168@1] usbcore: registered new interface driver usb-storage [ 1.567436@1] usbcore: registered new interface driver usbserial [ 1.573945@1] mousedev: PS/2 mouse device common for all mice [ 1.579496@1] usbcore: registered new interface driver xpad [ 1.584932@1] i2c /dev entries driver [ 1.588544@1] usbcore: registered new interface driver uvcvideo [ 1.594336@1] USB Video Class driver (1.1.1) [ 1.598605@1] md: linear personality registered for level -1 [ 1.604796@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.614430@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.620272@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.628031@2] usbcore: registered new interface driver usbhid [ 1.631985@2] usbhid: USB HID core driver [ 1.636238@0] ashmem: initialized [ 1.639692@2] logger: created 512K log 'log_main' [ 1.644224@0] logger: created 1K log 'log_events' [ 1.648935@2] logger: created 1K log 'log_radio' [ 1.653587@0] logger: created 16K log 'log_system' [ 1.658203@0] exFAT: Version 1.3.0 [ 1.662895@3] ff803000.serial: clock gate not found [ 1.666610@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.673743@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.688716@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.691314@3] console [ttyS0] enabled [ 1.691314@3] console [ttyS0] enabled [ 1.698513@3] bootconsole [aml_uart0] disabled [ 1.698513@3] bootconsole [aml_uart0] disabled [ 1.707995@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.714459@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.724744@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.734549@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.741059@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.753584@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.757541@2] irq = 20 [ 1.759881@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.768738@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.773119@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.778340@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.784821@2] meson-remote: Driver init [ 1.788775@2] meson-remote: remote_probe [ 1.792396@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.797442@2] meson-remote ff808040.rc: don't find the node [ 1.803996@2] meson-remote ff808040.rc: led_blink = 0 [ 1.808995@2] meson-remote ff808040.rc: don't find the node [ 1.815895@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.821541@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.827237@2] meson-remote ff808040.rc: custom_number = 3 [ 1.832558@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.838234@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.845399@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.851689@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.857837@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.863505@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.870663@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.876963@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.883105@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.888776@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.895934@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.902230@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.908359@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.915082@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.920860@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.926638@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.932331@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.938023@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.943974@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.949840@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.955445@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.960793@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.966141@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.972209@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.979133@3] meson-remote: IR XMP protocol handler initialized [ 1.984799@3] efusekeynum: 4 [ 1.987327@3] efusekeyname: mac offset: 0 size: 6 [ 1.993672@3] efusekeyname: mac_bt offset: 6 size: 6 [ 2.000048@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.006433@3] efusekeyname: usid offset: 18 size: 16 [ 2.013095@0] efuse efuse: probe OK! [ 2.019019@0] ge2d: ge2d_init_module [ 2.020374@0] [tsync_pcr_init]init success. [ 2.024947@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.031403@0] DI: di_module_init ok. [ 2.034556@0] dim:dim_module_init [ 2.037800@0] dim:dim_module_init finish [ 2.041456@0] dil:dil_init. [ 2.044398@0] dil:dil_init ok. [ 2.047320@0] vdin_drv_init: major 241 [ 2.051237@0] vdin_drv_init: vdin driver init done [ 2.055694@0] [viuin..]viuin_init_module viuin module init [ 2.061532@0] [viuin..]viuin_probe probe ok. [ 2.065603@0] amlvid:info: amlvideo_init called[ 2.069659@0] amlvid:info: amlvideo_create_instance called [ 2.075083@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.080428@0] amlvideo-000: V4L2 device registered as video10 [ 2.085872@0] amlvid:info: amlvideo_create_instance called [ 2.091293@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.096614@1] amlvideo-001: V4L2 device registered as video23 [ 2.102384@1] PPMGRDRV: warn: ppmgr module init func called [ 2.108678@1] videosync_create_instance dev_s ffffffc01da0b800,dev_s->dev ffffffc01d8a1480 [ 2.115814@1] videosync_create_instance reg videosync.0 [ 2.121060@1] aml_vecm_init:module init [ 2.121174@3] videosync_thread started [ 2.128812@1] amdolby_vision_init:module init [ 2.133079@1] prime_sl module init [ 2.136712@1] amlogic mtd driver init [ 2.140418@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.145638@1] bl mode descrete [ 2.148551@1] fip_copies 4 [ 2.151242@1] fip_size 0x200000 [ 2.154339@1] nand_clk_ctrl 0xffe07000 [ 2.158050@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.163676@1] nand_clk_ctrl 0xffe07000 [ 2.167380@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.175694@1] plat->aml_nand_device ffffff800a778cf8 [ 2.180221@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.186217@1] NAND device id: c2 dc 90 a2 57 3 [ 2.190402@1] NAND device: Manufacturer ID: [ 2.194447@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.201107@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.206605@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.212126@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.218428@1] mtd->oobavail: 0x10 [ 2.222045@1] aml_nand_init 2119: plat-name:bootloader [ 2.226808@1] Creating 1 MTD partitions on "bootloader": [ 2.232055@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.239437@3] bootloader initialized ok [ 2.241278@3] plat->aml_nand_device ffffff800a778cf8 [ 2.246222@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.252245@3] NAND device id: c2 dc 90 a2 57 3 [ 2.256379@3] NAND device: Manufacturer ID: [ 2.260431@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.267098@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.272591@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.278108@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.284431@3] mtd->oobavail: 0x10 [ 2.287862@3] aml_nand_init 2119: plat-name:nandnormal [ 2.292797@3] bbt_start=20 [ 2.295444@3] env_start=24 [ 2.298117@3] key_start=32 [ 2.300781@3] dtb_start=40 [ 2.303462@3] ddr_start=44 [ 2.306139@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.312615@3] get_free_node 43: bitmap=0 [ 2.316058@3] get_free_node 55: bitmap=1 [ 2.320141@3] get_free_node 43: bitmap=1 [ 2.323819@3] get_free_node 55: bitmap=3 [ 2.327903@3] get_free_node 43: bitmap=3 [ 2.331581@3] get_free_node 55: bitmap=7 [ 2.335463@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.342103@3] nbbt free list: [ 2.345028@3] blockN=21, ec=-1, dirty_flag=0 [ 2.349262@3] blockN=22, ec=-1, dirty_flag=0 [ 2.353488@3] blockN=23, ec=-1, dirty_flag=0 [ 2.357715@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.363123@3] nbbt valid addr: 500000 [ 2.366341@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.371946@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.378189@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.384599@3] get_free_node 43: bitmap=7 [ 2.388075@3] get_free_node 55: bitmap=f [ 2.392159@3] get_free_node 43: bitmap=f [ 2.395838@3] get_free_node 55: bitmap=1f [ 2.400008@3] get_free_node 43: bitmap=1f [ 2.403773@3] get_free_node 55: bitmap=3f [ 2.407943@3] get_free_node 43: bitmap=3f [ 2.411708@3] get_free_node 55: bitmap=7f [ 2.415878@3] get_free_node 43: bitmap=7f [ 2.419643@3] get_free_node 55: bitmap=ff [ 2.423813@3] get_free_node 43: bitmap=ff [ 2.427578@3] get_free_node 55: bitmap=1ff [ 2.431834@3] get_free_node 43: bitmap=1ff [ 2.435685@3] get_free_node 55: bitmap=3ff [ 2.439738@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.446379@3] nenv free list: [ 2.449304@3] blockN=25, ec=-1, dirty_flag=0 [ 2.453538@3] blockN=26, ec=-1, dirty_flag=0 [ 2.457764@3] blockN=27, ec=-1, dirty_flag=0 [ 2.461990@3] blockN=28, ec=-1, dirty_flag=0 [ 2.466216@3] blockN=29, ec=-1, dirty_flag=0 [ 2.470443@3] blockN=30, ec=-1, dirty_flag=0 [ 2.474669@3] blockN=31, ec=-1, dirty_flag=0 [ 2.478895@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.490644@3] nenv valid addr: 610000 [ 2.490663@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.495099@3] get_free_node 43: bitmap=3ff [ 2.498949@3] get_free_node 55: bitmap=7ff [ 2.503215@3] get_free_node 43: bitmap=7ff [ 2.507057@3] get_free_node 55: bitmap=fff [ 2.511313@3] get_free_node 43: bitmap=fff [ 2.515164@3] get_free_node 55: bitmap=1fff [ 2.519507@3] get_free_node 43: bitmap=1fff [ 2.523444@3] get_free_node 55: bitmap=3fff [ 2.527786@3] get_free_node 43: bitmap=3fff [ 2.531724@3] get_free_node 55: bitmap=7fff [ 2.536067@3] get_free_node 43: bitmap=7fff [ 2.540004@3] get_free_node 55: bitmap=ffff [ 2.544347@3] get_free_node 43: bitmap=ffff [ 2.548284@3] get_free_node 55: bitmap=1ffff [ 2.552713@3] get_free_node 43: bitmap=1ffff [ 2.556737@3] get_free_node 55: bitmap=3ffff [ 2.560963@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.567607@3] nkey free list: [ 2.570536@3] blockN=32, ec=-1, dirty_flag=0 [ 2.574762@3] blockN=33, ec=-1, dirty_flag=0 [ 2.578988@3] blockN=34, ec=-1, dirty_flag=0 [ 2.583255@3] blockN=35, ec=-1, dirty_flag=0 [ 2.587442@3] blockN=36, ec=-1, dirty_flag=0 [ 2.591667@3] blockN=37, ec=-1, dirty_flag=0 [ 2.595894@3] blockN=38, ec=-1, dirty_flag=0 [ 2.600119@3] blockN=39, ec=-1, dirty_flag=0 [ 2.604346@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.609435@3] nkey valid addr: fffffffffffc0000 [ 2.613920@3] aml_nand_key_check 1251 NO key exist [ 2.618665@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.625280@3] get_free_node 43: bitmap=3ffff [ 2.629101@3] get_free_node 55: bitmap=7ffff [ 2.633538@3] get_free_node 43: bitmap=7ffff [ 2.637553@3] get_free_node 55: bitmap=fffff [ 2.641981@3] get_free_node 43: bitmap=fffff [ 2.646017@3] get_free_node 55: bitmap=1fffff [ 2.650319@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.656958@3] ndtb free list: [ 2.659891@3] blockN=41, ec=-1, dirty_flag=0 [ 2.664117@3] blockN=42, ec=-1, dirty_flag=0 [ 2.668343@3] blockN=43, ec=-1, dirty_flag=0 [ 2.672570@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.690552@3] ndtb valid addr: a00000 [ 2.690572@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.695000@3] get_free_node 43: bitmap=1fffff [ 2.699110@3] get_free_node 55: bitmap=3fffff [ 2.703625@3] get_free_node 43: bitmap=3fffff [ 2.707734@3] get_free_node 55: bitmap=7fffff [ 2.712047@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.718687@3] nddr free list: [ 2.721621@3] blockN=44, ec=-1, dirty_flag=0 [ 2.725846@3] blockN=45, ec=-1, dirty_flag=0 [ 2.730073@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.735161@3] nddr valid addr: fffffffffffc0000 [ 2.739647@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.744393@3] tpl: off 16777216, size 8388608 [ 2.810669@3] Creating 7 MTD partitions on "nandnormal": [ 2.810699@3] 0x000001000000-0x000001800000 : "tpl" [ 2.817912@1] 0x000001800000-0x000001a00000 : "misc" [ 2.821504@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.826390@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.833496@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.842285@2] 0x000003b00000-0x000015300000 : "system" [ 2.879203@2] 0x000015300000-0x000020000000 : "data" [ 2.903259@2] nandnormal initialized ok [ 2.903351@2] aml_ubootenv_init: register env chardev [ 2.906716@2] aml_ubootenv_init: register env chardev OK [ 2.911935@2] amlnf_dtb_init: register dtb cdev [ 2.916464@2] amlnf_dtb_init: register dtd cdev OK [ 2.921000@2] mtd_nand_probe 267 , err = 0 [ 2.925743@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.931320@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.938140@2] unifykey: storage in base: 0xffffffc005000000 [ 2.943073@2] unifykey: storage out base: 0xffffffc005040000 [ 2.948663@2] unifykey: storage block base: 0xffffffc005080000 [ 2.954435@2] unifykey: probe done! [ 2.958364@2] unifykey: no efuse-version set, use default value: -1 [ 2.964111@2] unifykey: key unify config unifykey-num is 6 [ 2.969678@2] unifykey: key unify fact unifykey-num is 6 [ 2.974801@2] unifykey: unifykey_devno: ee00000 [ 2.979593@2] unifykey: device unifykeys created ok [ 2.984198@2] unifykey: aml_unifykeys_init done! [ 2.988985@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.995315@3] amlkaraoke init success! [ 2.998475@3] sysled: module init [ 3.001898@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.006820@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.013948@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.020470@1] amlogic rfkill init [ 3.025164@1] dmc_monitor_probe [ 3.026896@1] page_trace_module_init, create sysfs failed [ 3.032498@1] defendkey defendkey: Reserved memory is not enough! [ 3.038044@1] defendkey: probe of defendkey failed with error -22 [ 3.045054@1] usbcore: registered new interface driver snd-usb-audio [ 3.054362@1] asoc debug: aml_audio_controller_probe-130 [ 3.056092@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.061462@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.069231@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.076409@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.082780@1] aml_tdm_platform_probe(), share en = 1[ 3.087524@1] No channel mask node Channel_Mask [ 3.092287@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.097837@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.105795@1] aml_tdm_platform_probe(), share en = 1[ 3.110301@1] No channel mask node Channel_Mask [ 3.115042@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.120601@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.128555@1] aml_tdm_platform_probe(), share en = 1[ 3.133075@1] No channel mask node Channel_Mask [ 3.138669@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.145720@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.153801@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.163716@1] Register vad [ 3.164840@1] check whether to update sound card init data [ 3.170710@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.177673@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.184990@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.190595@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.198271@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.205595@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.211474@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.217958@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.225051@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.231004@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.237952@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.243729@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.250454@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.258118@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.265282@3] snd_card_add_kcontrols card:ffffffc01c915018 [ 3.270320@3] effect_v2 is not init [ 3.273739@3] Failed to add VAD controls [ 3.277970@3] GACT probability NOT on [ 3.281244@3] Mirror/redirect action on [ 3.285071@3] u32 classifier [ 3.287878@3] Actions configured [ 3.291419@3] Netfilter messages via NETLINK v0.30. [ 3.296498@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.302688@3] ctnetlink v0.93: registering with nfnetlink. [ 3.308416@1] xt_time: kernel timezone is -0000 [ 3.312406@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.318587@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.323599@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.329172@1] Initializing XFRM netlink socket [ 3.334155@1] NET: Registered protocol family 10 [ 3.339339@1] mip6: Mobile IPv6 [ 3.341208@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.347058@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.354073@1] NET: Registered protocol family 17 [ 3.357335@1] NET: Registered protocol family 15 [ 3.361952@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.375050@1] Bluetooth: RFCOMM TTY layer initialized [ 3.379929@1] Bluetooth: RFCOMM socket layer initialized [ 3.385200@1] Bluetooth: RFCOMM ver 1.11 [ 3.389061@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.394488@1] Bluetooth: BNEP filters: protocol multicast [ 3.399839@1] Bluetooth: BNEP socket layer initialized [ 3.404921@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.410964@1] Bluetooth: HIDP socket layer initialized [ 3.416136@1] l2tp_core: L2TP core driver, V2.0 [ 3.420553@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.425447@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.431177@1] l2tp_netlink: L2TP netlink interface [ 3.435934@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.441959@1] l2tp_debugfs: L2TP debugfs support [ 3.446493@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.453097@1] NET: Registered protocol family 35 [ 3.457858@1] Key type dns_resolver registered [ 3.463037@1] Registered swp emulation handler [ 3.466515@1] Registered cp15_barrier emulation handler [ 3.471688@1] Registered setend emulation handler [ 3.476320@1] disable EAS feature [ 3.480476@0] registered taskstats version 1 [ 3.493198@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.999412@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.999474@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.007635@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.016084@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.022986@2] hub 1-0:1.0: USB hub found [ 4.026032@2] hub 1-0:1.0: 1 port detected [ 4.030319@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.035594@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.043410@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.052324@3] hub 2-0:1.0: USB hub found [ 4.055488@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.062771@3] usb usb2: Unsupported the hub [ 4.067218@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.075318@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.183778@1] dwc_otg: Core Release: 3.10a [ 4.183816@1] dwc_otg: Setting default values for core params [ 4.187975@1] dwc_otg: curmode: 0, host_only: 0 [ 4.204766@1] dwc_otg: Using Buffer DMA mode [ 4.204788@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.208667@1] dwc_otg: Working on port type = SLAVE [ 4.213498@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.220484@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.230094@1] gxbb_pm: enter meson_pm_probe! [ 4.230134@1] no vddio3v3_en pin[ 4.231774@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.236831@1] gxbb_pm: meson_pm_probe done [ 4.24119[ 4.247460@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.252885@1] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.462254@2] ubi0: attaching mtd6 [ 4.990523@2] ubi0: scanning is finished [ 4.994701@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.994988@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.002022@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.008885@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.015953@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.022164@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.029491@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.038723@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.048132@2] ubi0: background thread "ubi_bgt0d" started, PID 2002 [ 5.053833@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2004 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.098563@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.100489@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.110542@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.121281@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.127232@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.303115@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.364154@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.448009@0] ubi1: attaching mtd7 [ 5.774584@0] ubi1: scanning is finished [ 5.778333@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.778577@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.785589@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.792474@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.799540@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.805667@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.812995@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.822227@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.831549@3] ubi1: background thread "ubi_bgt1d" started, PID 2032 UBI device number 1, total 692 L[ 5.840829@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2036 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.864524@0] UBIFS (ubi1:0): recovery needed [ 5.941166@2] UBIFS (ubi1:0): recovery completed [ 5.941318@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.947509@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.957501@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.968194@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.974960@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2124, tid:f2b31450 --- 0 [ 6.999299@0] aml_tdm_open [ 7.007087@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.007128@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.013772@0] aml_tdm_open [ 7.015311@0] Not init audio effects OK skip network Init because /sys/class/net/eth0 is not exist Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.051030@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.051088@3] cpufreq_interactive: no need to active hmp boost! Audio Stop Callback: Stopping audio stream # Audio Start Callback: Starting audio stream [ 7.115709@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.119379@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.125708@2] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.174277@2] asoc-aml-card auge_sound: tdm playback enable [ 8.371611@1] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894351 [ 8.372046@1] asoc-aml-card auge_sound: tdm capture stop [ 8.377558@2] asoc-aml-card auge_sound: tdm prepare capture [ 8.382841@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 8.388825@2] asoc-aml-card auge_sound: tdm capture enable [ 8.404724@2] asoc-aml-card auge_sound: tdm playback stop [ 8.438640@2] asoc-aml-card auge_sound: tdm playback enable [ 8.609664@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 15.299215@3] asoc-aml-card auge_sound: tdm playback stop [ 15.299440@3] asoc-aml-card auge_sound: tdm capture stop [ 15.304342@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 17.301744@2] mtd_nand_reboot_notifier 35 [ 17.302007@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 17.310512@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 17.313664@2] usb usb2: USB disconnect, device number 1 [ 17.323617@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 17.324370@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 17.329815@3] usb usb1: USB disconnect, device number 1 [ 17.338660@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 17.357495@0] reboot: Restarting system [ 17.357610@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21796 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 18 00 31 25 0c 3f 17 00 2f 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015876 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976349 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016841@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036441@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209535@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214668@0] ASID allocator initialised with 32768 entries [ 0.252648@0] secmon: can't fine clear_range [ 0.253230@0] EFI services will not be available. [ 0.256076@0] Meson chip version = RevC (25:C - 43:0) [ 0.290010@1] Detected VIPT I-cache on CPU1 [ 0.290071@1] CPU1: update cpu_capacity 1024 [ 0.290073@1] CPU1: Booted secondary processor [410fd034] [ 0.318059@2] Detected VIPT I-cache on CPU2 [ 0.318111@2] CPU2: update cpu_capacity 1024 [ 0.318114@2] CPU2: Booted secondary processor [410fd034] [ 0.346127@3] Detected VIPT I-cache on CPU3 [ 0.346175@3] CPU3: update cpu_capacity 1024 [ 0.346178@3] CPU3: Booted secondary processor [410fd034] [ 0.346268@0] Brought up 4 CPUs [ 0.385490@0] SMP: Total of 4 processors activated. [ 0.390399@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396435@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407401@0] CPU: All CPU(s) started at EL2 [ 0.408175@0] alternatives: patching kernel code [ 0.413572@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420713@0] devtmpfs: initialized [ 0.436157@0] DMI not present or invalid. [ 0.436542@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444536@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451093@0] pinctrl core: initialized pinctrl subsystem [ 0.457681@0] NET: Registered protocol family 16 [ 0.477026@0] cpuidle: using governor menu [ 0.477163@0] register canvas platform driver [ 0.479896@0] register rdma platform driver [ 0.485349@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491718@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499188@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505309@0] clkmsr: clkmsr: driver init [ 0.509033@0] codec_mm_module_init [ 0.512464@0] media_configs_system_init [ 0.516597@0] aml_watch_point_probe, in, wp:2 [ 0.522118@0] pstore: using zlib compression [ 0.525524@0] console [pstore-1] enabled [ 0.528851@0] pstore: Registered ramoops as persistent store backend [ 0.535265@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549312@0] aml_iomap: amlogic iomap probe done [ 0.554047@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555918@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564900@0] audio_clocks: audio_clocks_probe done [ 0.573467@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573524@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578705@0] amlogic auge_snd_iomap probe done [ 0.854412@0] vgaarb: loaded [ 0.854801@0] SCSI subsystem initialized [ 0.855919@0] usbcore: registered new interface driver usbfs [ 0.861407@0] usbcore: registered new interface driver hub [ 0.866940@0] usbcore: registered new device driver usb [ 0.872214@0] Linux video capture interface: v2.00 [ 0.876959@0] pps_core: LinuxPPS API ver. 1 registered [ 0.882061@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.891420@0] PTP clock support registered [ 0.899777@0] dmi: Firmware registration failed. [ 0.903830@0] secmon: reserve_mem_size:0x300000 [ 0.904734@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.911680@0] secmon: get page:ffffffbf00140000, 5000 [ 0.916410@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.924799@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.931534@0] fb: osd_init_module [ 0.936037@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.941602@0] Bluetooth: Core ver 2.22 [ 0.944725@0] NET: Registered protocol family 31 [ 0.949324@0] Bluetooth: HCI device and connection manager initialized [ 0.955876@0] Bluetooth: HCI socket layer initialized [ 0.960942@0] Bluetooth: L2CAP socket layer initialized [ 0.966265@0] Bluetooth: SCO socket layer initialized [ 0.971810@0] NetLabel: Initializing [ 0.974843@0] NetLabel: domain hash size = 128 [ 0.979495@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.984651@0] NetLabel: unlabeled traffic allowed by default [ 0.992050@3] clocksource: Switched to clocksource arch_sys_counter [ 1.092649@3] VFS: Disk quotas dquot_6.6.0 [ 1.092755@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.111950@0] NET: Registered protocol family 2 [ 1.112611@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.118176@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.124828@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.131431@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.137383@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.144054@0] NET: Registered protocol family 1 [ 1.148892@0] RPC: Registered named UNIX socket transport module. [ 1.154532@0] RPC: Registered udp transport module. [ 1.159410@0] RPC: Registered tcp transport module. [ 1.164316@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.172432@0] Unpacking initramfs... [ 1.273990@0] Freeing initrd memory: 2308K [ 1.275401@0] hw perfevents: clusterb_enabled = 0 [ 1.277239@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.281669@0] hw perfevents: cluster A irq = 7 [ 1.286231@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.295578@0] audit: initializing netlink subsys (disabled) [ 1.299747@0] audit: type=2000 audit(1.064:1): initialized [ 1.306404@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.327305@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.329285@0] NFS: Registering the id_resolver key type [ 1.332997@0] Key type id_resolver registered [ 1.337327@0] Key type id_legacy registered [ 1.341834@0] fuse init (API version 7.26) [ 1.350329@0] NET: Registered protocol family 38 [ 1.350374@0] Key type asymmetric registered [ 1.354576@0] Asymmetric key parser 'x509' registered [ 1.359916@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.367262@0] io scheduler noop registered (default) [ 1.372239@0] io scheduler deadline registered [ 1.376985@0] io scheduler cfq registered [ 1.391766@0] Unable to detect cache hierarchy for CPU 0 [ 1.391940@0] random: fast init done [ 1.395290@0] random: crng init done [ 1.411759@3] loop: module loaded [ 1.416914@3] zram: Added device: zram0 [ 1.417407@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.422664@3] libphy: Fixed MDIO Bus: probed [ 1.426559@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.431328@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.438913@3] PPP generic driver version 2.4.2 [ 1.442472@3] PPP BSD Compression module registered [ 1.447069@3] PPP Deflate Compression module registered [ 1.452321@3] PPP MPPE Compression module registered [ 1.457295@3] NET: Registered protocol family 24 [ 1.462062@3] usbcore: registered new interface driver asix [ 1.467653@3] usbcore: registered new interface driver ax88179_178a [ 1.473934@3] usbcore: registered new interface driver cdc_ether [ 1.479958@3] usbcore: registered new interface driver net1080 [ 1.485806@3] usbcore: registered new interface driver cdc_subset [ 1.491931@3] usbcore: registered new interface driver zaurus [ 1.497728@3] usbcore: registered new interface driver cdc_ncm [ 1.504199@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.510242@3] ehci-pci: EHCI PCI platform driver [ 1.514983@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.521296@3] ohci-pci: OHCI PCI platform driver [ 1.526476@3] usbcore: registered new interface driver cdc_acm [ 1.531773@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.540104@3] usbcore: registered new interface driver usb-storage [ 1.546353@3] usbcore: registered new interface driver usbserial [ 1.552837@0] mousedev: PS/2 mouse device common for all mice [ 1.558395@0] usbcore: registered new interface driver xpad [ 1.563852@3] i2c /dev entries driver [ 1.567450@3] usbcore: registered new interface driver uvcvideo [ 1.573255@3] USB Video Class driver (1.1.1) [ 1.577523@3] md: linear personality registered for level -1 [ 1.583726@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.593368@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.599183@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.606952@2] usbcore: registered new interface driver usbhid [ 1.610883@2] usbhid: USB HID core driver [ 1.615129@0] ashmem: initialized [ 1.618635@2] logger: created 512K log 'log_main' [ 1.623125@0] logger: created 1K log 'log_events' [ 1.627860@2] logger: created 1K log 'log_radio' [ 1.632555@0] logger: created 16K log 'log_system' [ 1.637115@0] exFAT: Version 1.3.0 [ 1.641804@2] ff803000.serial: clock gate not found [ 1.645490@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.652657@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.667628@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.670241@2] console [ttyS0] enabled [ 1.670241@2] console [ttyS0] enabled [ 1.677466@2] bootconsole [aml_uart0] disabled [ 1.677466@2] bootconsole [aml_uart0] disabled [ 1.686931@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.693370@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.703649@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.713508@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.719983@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.732458@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.736472@0] irq = 20 [ 1.738807@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.747613@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.752087@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.757248@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.763720@0] meson-remote: Driver init [ 1.767681@0] meson-remote: remote_probe [ 1.771311@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.776367@0] meson-remote ff808040.rc: don't find the node [ 1.782908@0] meson-remote ff808040.rc: led_blink = 0 [ 1.787907@0] meson-remote ff808040.rc: don't find the node [ 1.794810@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.800447@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.806153@0] meson-remote ff808040.rc: custom_number = 3 [ 1.811467@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.817151@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.824305@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.830607@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.836747@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.842418@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.849575@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.855871@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.862016@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.867689@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.874847@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.881143@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.887272@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.893994@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.899772@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.905551@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.911243@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.916936@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.922887@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.928752@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.934358@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.939706@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.945053@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.951069@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.958081@0] meson-remote: IR XMP protocol handler initialized [ 1.963711@0] efusekeynum: 4 [ 1.966231@0] efusekeyname: mac offset: 0 size: 6 [ 1.972583@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.978964@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.985341@0] efusekeyname: usid offset: 18 size: 16 [ 1.991975@3] efuse efuse: probe OK! [ 1.997586@2] ge2d: ge2d_init_module [ 1.999284@2] [tsync_pcr_init]init success. [ 2.003891@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.010297@1] DI: di_module_init ok. [ 2.013461@1] dim:dim_module_init [ 2.016741@1] dim:dim_module_init finish [ 2.020367@1] dil:dil_init. [ 2.023302@1] dil:dil_init ok. [ 2.026252@1] vdin_drv_init: major 241 [ 2.030111@1] vdin_drv_init: vdin driver init done [ 2.034603@1] [viuin..]viuin_init_module viuin module init [ 2.040418@1] [viuin..]viuin_probe probe ok. [ 2.044531@1] amlvid:info: amlvideo_init called[ 2.048570@1] amlvid:info: amlvideo_create_instance called [ 2.053989@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.059322@3] amlvideo-000: V4L2 device registered as video10 [ 2.064790@3] amlvid:info: amlvideo_create_instance called [ 2.070208@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.075544@0] amlvideo-001: V4L2 device registered as video23 [ 2.081283@0] PPMGRDRV: warn: ppmgr module init func called [ 2.087441@0] videosync_create_instance dev_s ffffffc01c99a400,dev_s->dev ffffffc01c993d00 [ 2.094723@0] videosync_create_instance reg videosync.0 [ 2.100157@0] aml_vecm_init:module init [ 2.100158@3] videosync_thread started [ 2.107727@0] amdolby_vision_init:module init [ 2.111989@0] prime_sl module init [ 2.115601@0] amlogic mtd driver init [ 2.119336@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.124596@0] bl mode descrete [ 2.127465@0] fip_copies 4 [ 2.130156@0] fip_size 0x200000 [ 2.133251@0] nand_clk_ctrl 0xffe07000 [ 2.136963@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.142588@0] nand_clk_ctrl 0xffe07000 [ 2.146293@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.154610@0] plat->aml_nand_device ffffff800a778cf8 [ 2.159140@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.165122@0] NAND device id: c2 dc 90 a2 57 3 [ 2.169310@0] NAND device: Manufacturer ID: [ 2.173358@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.180017@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.185518@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.191039@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.197349@0] mtd->oobavail: 0x10 [ 2.200936@0] aml_nand_init 2119: plat-name:bootloader [ 2.205707@0] Creating 1 MTD partitions on "bootloader": [ 2.210966@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.218446@3] bootloader initialized ok [ 2.220220@3] plat->aml_nand_device ffffff800a778cf8 [ 2.225125@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.231155@3] NAND device id: c2 dc 90 a2 57 3 [ 2.235292@3] NAND device: Manufacturer ID: [ 2.239351@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.246006@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.251499@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.257025@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.263325@3] mtd->oobavail: 0x10 [ 2.266803@3] aml_nand_init 2119: plat-name:nandnormal [ 2.271724@3] bbt_start=20 [ 2.274360@3] env_start=24 [ 2.277029@3] key_start=32 [ 2.279694@3] dtb_start=40 [ 2.282375@3] ddr_start=44 [ 2.285051@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.291531@3] get_free_node 43: bitmap=0 [ 2.294970@3] get_free_node 55: bitmap=1 [ 2.299054@3] get_free_node 43: bitmap=1 [ 2.302731@3] get_free_node 55: bitmap=3 [ 2.306816@3] get_free_node 43: bitmap=3 [ 2.310494@3] get_free_node 55: bitmap=7 [ 2.314375@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.321015@3] nbbt free list: [ 2.323940@3] blockN=21, ec=-1, dirty_flag=0 [ 2.328175@3] blockN=22, ec=-1, dirty_flag=0 [ 2.332401@3] blockN=23, ec=-1, dirty_flag=0 [ 2.336627@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.342036@3] nbbt valid addr: 500000 [ 2.345254@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.350860@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.357101@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.363511@3] get_free_node 43: bitmap=7 [ 2.366988@3] get_free_node 55: bitmap=f [ 2.371072@3] get_free_node 43: bitmap=f [ 2.374750@3] get_free_node 55: bitmap=1f [ 2.378921@3] get_free_node 43: bitmap=1f [ 2.382685@3] get_free_node 55: bitmap=3f [ 2.386856@3] get_free_node 43: bitmap=3f [ 2.390620@3] get_free_node 55: bitmap=7f [ 2.394791@3] get_free_node 43: bitmap=7f [ 2.398555@3] get_free_node 55: bitmap=ff [ 2.402725@3] get_free_node 43: bitmap=ff [ 2.406489@3] get_free_node 55: bitmap=1ff [ 2.410747@3] get_free_node 43: bitmap=1ff [ 2.414596@3] get_free_node 55: bitmap=3ff [ 2.418652@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.425291@3] nenv free list: [ 2.428224@3] blockN=25, ec=-1, dirty_flag=0 [ 2.432451@3] blockN=26, ec=-1, dirty_flag=0 [ 2.436676@3] blockN=27, ec=-1, dirty_flag=0 [ 2.440903@3] blockN=28, ec=-1, dirty_flag=0 [ 2.445129@3] blockN=29, ec=-1, dirty_flag=0 [ 2.449355@3] blockN=30, ec=-1, dirty_flag=0 [ 2.453582@3] blockN=31, ec=-1, dirty_flag=0 [ 2.457808@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.469551@3] nenv valid addr: 610000 [ 2.469570@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.474003@3] get_free_node 43: bitmap=3ff [ 2.477852@3] get_free_node 55: bitmap=7ff [ 2.482110@3] get_free_node 43: bitmap=7ff [ 2.485961@3] get_free_node 55: bitmap=fff [ 2.490218@3] get_free_node 43: bitmap=fff [ 2.494068@3] get_free_node 55: bitmap=1fff [ 2.498411@3] get_free_node 43: bitmap=1fff [ 2.502349@3] get_free_node 55: bitmap=3fff [ 2.506691@3] get_free_node 43: bitmap=3fff [ 2.510628@3] get_free_node 55: bitmap=7fff [ 2.514971@3] get_free_node 43: bitmap=7fff [ 2.518908@3] get_free_node 55: bitmap=ffff [ 2.523251@3] get_free_node 43: bitmap=ffff [ 2.527188@3] get_free_node 55: bitmap=1ffff [ 2.531621@3] get_free_node 43: bitmap=1ffff [ 2.535641@3] get_free_node 55: bitmap=3ffff [ 2.539867@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.546507@3] nkey free list: [ 2.549440@3] blockN=32, ec=-1, dirty_flag=0 [ 2.553666@3] blockN=33, ec=-1, dirty_flag=0 [ 2.557892@3] blockN=34, ec=-1, dirty_flag=0 [ 2.562118@3] blockN=35, ec=-1, dirty_flag=0 [ 2.566345@3] blockN=36, ec=-1, dirty_flag=0 [ 2.570571@3] blockN=37, ec=-1, dirty_flag=0 [ 2.574797@3] blockN=38, ec=-1, dirty_flag=0 [ 2.579024@3] blockN=39, ec=-1, dirty_flag=0 [ 2.583250@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.588339@3] nkey valid addr: fffffffffffc0000 [ 2.592823@3] aml_nand_key_check 1251 NO key exist [ 2.597568@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.604184@3] get_free_node 43: bitmap=3ffff [ 2.607996@3] get_free_node 55: bitmap=7ffff [ 2.612434@3] get_free_node 43: bitmap=7ffff [ 2.616456@3] get_free_node 55: bitmap=fffff [ 2.620887@3] get_free_node 43: bitmap=fffff [ 2.624909@3] get_free_node 55: bitmap=1fffff [ 2.629222@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.635873@3] ndtb free list: [ 2.638796@3] blockN=41, ec=-1, dirty_flag=0 [ 2.643021@3] blockN=42, ec=-1, dirty_flag=0 [ 2.647247@3] blockN=43, ec=-1, dirty_flag=0 [ 2.651474@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.669483@3] ndtb valid addr: a00000 [ 2.669503@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.673931@3] get_free_node 43: bitmap=1fffff [ 2.678040@3] get_free_node 55: bitmap=3fffff [ 2.682555@3] get_free_node 43: bitmap=3fffff [ 2.686665@3] get_free_node 55: bitmap=7fffff [ 2.690977@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.697618@3] nddr free list: [ 2.700550@3] blockN=44, ec=-1, dirty_flag=0 [ 2.704776@3] blockN=45, ec=-1, dirty_flag=0 [ 2.709003@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.714091@3] nddr valid addr: fffffffffffc0000 [ 2.718576@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.723322@3] tpl: off 16777216, size 8388608 [ 2.789716@3] Creating 7 MTD partitions on "nandnormal": [ 2.789747@3] 0x000001000000-0x000001800000 : "tpl" [ 2.797132@0] 0x000001800000-0x000001a00000 : "misc" [ 2.800640@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.805486@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.812556@1] 0x000002c00000-0x000003b00000 : "boot" [ 2.817343@1] 0x000003b00000-0x000015300000 : "system" [ 2.856456@1] 0x000015300000-0x000020000000 : "data" [ 2.879881@1] nandnormal initialized ok [ 2.879974@1] aml_ubootenv_init: register env chardev [ 2.883347@1] aml_ubootenv_init: register env chardev OK [ 2.888561@1] amlnf_dtb_init: register dtb cdev [ 2.893084@1] amlnf_dtb_init: register dtd cdev OK [ 2.897623@1] mtd_nand_probe 267 , err = 0 [ 2.902332@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.907954@1] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.914765@1] unifykey: storage in base: 0xffffffc005000000 [ 2.919699@1] unifykey: storage out base: 0xffffffc005040000 [ 2.925291@1] unifykey: storage block base: 0xffffffc005080000 [ 2.931062@1] unifykey: probe done! [ 2.934955@1] unifykey: no efuse-version set, use default value: -1 [ 2.940739@1] unifykey: key unify config unifykey-num is 6 [ 2.946204@1] unifykey: key unify fact unifykey-num is 6 [ 2.951420@1] unifykey: unifykey_devno: ee00000 [ 2.956208@1] unifykey: device unifykeys created ok [ 2.960821@1] unifykey: aml_unifykeys_init done! [ 2.965609@1] audio_dsp: [dsp]register dsp to char divece(257) [ 2.971942@3] amlkaraoke init success! [ 2.975092@3] sysled: module init [ 2.978479@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.983445@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.990565@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 2.997114@1] amlogic rfkill init [ 3.001723@2] dmc_monitor_probe [ 3.003491@2] page_trace_module_init, create sysfs failed [ 3.009170@2] defendkey defendkey: Reserved memory is not enough! [ 3.014686@2] defendkey: probe of defendkey failed with error -22 [ 3.021646@2] usbcore: registered new interface driver snd-usb-audio [ 3.031019@2] asoc debug: aml_audio_controller_probe-130 [ 3.032796@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.038070@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.045862@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.053038@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.059407@2] aml_tdm_platform_probe(), share en = 1[ 3.064152@2] No channel mask node Channel_Mask [ 3.068918@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.074458@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.082411@2] aml_tdm_platform_probe(), share en = 1[ 3.086928@2] No channel mask node Channel_Mask [ 3.091638@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.097222@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.105150@2] aml_tdm_platform_probe(), share en = 1[ 3.109689@2] No channel mask node Channel_Mask [ 3.115278@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.122378@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.130435@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.140410@2] Register vad [ 3.141479@2] check whether to update sound card init data [ 3.147322@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.154306@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.161611@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.167225@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.174894@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.182226@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.188105@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.194579@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.201721@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.207640@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.214472@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.220336@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.227076@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.234738@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.241885@1] snd_card_add_kcontrols card:ffffffc01c9d0818 [ 3.246955@1] effect_v2 is not init [ 3.250365@1] Failed to add VAD controls [ 3.254616@1] GACT probability NOT on [ 3.257895@1] Mirror/redirect action on [ 3.261666@1] u32 classifier [ 3.264507@1] Actions configured [ 3.268045@1] Netfilter messages via NETLINK v0.30. [ 3.273147@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.279330@1] ctnetlink v0.93: registering with nfnetlink. [ 3.285049@2] xt_time: kernel timezone is -0000 [ 3.289023@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.295215@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.300260@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.305809@2] Initializing XFRM netlink socket [ 3.310795@2] NET: Registered protocol family 10 [ 3.315951@2] mip6: Mobile IPv6 [ 3.317863@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.323646@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.330680@2] NET: Registered protocol family 17 [ 3.334005@2] NET: Registered protocol family 15 [ 3.338563@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.351663@2] Bluetooth: RFCOMM TTY layer initialized [ 3.356553@2] Bluetooth: RFCOMM socket layer initialized [ 3.361834@2] Bluetooth: RFCOMM ver 1.11 [ 3.365687@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.371115@2] Bluetooth: BNEP filters: protocol multicast [ 3.376465@2] Bluetooth: BNEP socket layer initialized [ 3.381551@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.387590@2] Bluetooth: HIDP socket layer initialized [ 3.392761@2] l2tp_core: L2TP core driver, V2.0 [ 3.397179@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.402075@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.407802@2] l2tp_netlink: L2TP netlink interface [ 3.412581@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.418606@2] l2tp_debugfs: L2TP debugfs support [ 3.423121@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.429727@2] NET: Registered protocol family 35 [ 3.434481@2] Key type dns_resolver registered [ 3.439655@2] Registered swp emulation handler [ 3.443069@2] Registered cp15_barrier emulation handler [ 3.448227@2] Registered setend emulation handler [ 3.452939@2] disable EAS feature [ 3.457023@1] registered taskstats version 1 [ 3.469803@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.976004@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.976089@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.984172@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.992682@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 3.999605@0] hub 1-0:1.0: USB hub found [ 4.002583@0] hub 1-0:1.0: 1 port detected [ 4.006961@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.012192@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.020010@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.028937@3] hub 2-0:1.0: USB hub found [ 4.032090@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.039371@3] usb usb2: Unsupported the hub [ 4.043906@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:25 UTC (1420070425) [ 4.051910@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.160326@3] dwc_otg: Core Release: 3.10a [ 4.160361@3] dwc_otg: Setting default values for core params [ 4.164525@3] dwc_otg: curmode: 0, host_only: 0 [ 4.181346@3] dwc_otg: Using Buffer DMA mode [ 4.181370@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.185250@3] dwc_otg: Working on port type = SLAVE [ 4.190083@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.197248@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.206308@0] gxbb_pm: enter meson_pm_probe! [ 4.206348@0] no vddio3v3_en pin[ 4.207985@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.213066@0] gxbb_pm: meson_pm_probe done [ 4.2174°[ 4.223658@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.229114@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.438281@0] ubi0: attaching mtd6 [ 4.966939@0] ubi0: scanning is finished [ 4.971274@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.971563@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.978572@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.985458@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.992524@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 4.998738@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.006083@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.015299@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.024710@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.030475@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.075268@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.077247@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.087206@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.097983@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.103937@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.289886@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.350876@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.436307@3] ubi1: attaching mtd7 [ 5.762891@3] ubi1: scanning is finished [ 5.766728@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.766892@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.773916@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.780789@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.787853@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.793981@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.801309@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.810540@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.819862@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 LE[ 5.829102@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 Bs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.852758@3] UBIFS (ubi1:0): recovery needed [ 5.931089@0] UBIFS (ubi1:0): recovery completed [ 5.931247@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.937433@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.947427@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.958119@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.964849@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2ef3450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.992791@1] aml_tdm_open [ 7.002196@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.002233@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.009096@1] aml_tdm_open [ 7.010412@1] Not init audio effects [ 7.015319@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.019704@0] cpufreq_interactive: no need to active hmp boost! Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.109278@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.112925@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.118852@1] asoc-aml-card auge_sound: tdm capture enable he layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.167942@1] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.692345@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22019 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015884 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975527 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016832@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056094@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110786@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129126@0] ftrace: allocating 43519 entries in 170 pages [ 0.209424@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210238@0] CPU0: update cpu_capacity 1024 [ 0.214565@0] ASID allocator initialised with 32768 entries [ 0.252539@0] secmon: can't fine clear_range [ 0.253137@0] EFI services will not be available. [ 0.255969@0] Meson chip version = RevC (25:C - 43:0) [ 0.289894@1] Detected VIPT I-cache on CPU1 [ 0.289956@1] CPU1: update cpu_capacity 1024 [ 0.289959@1] CPU1: Booted secondary processor [410fd034] [ 0.317953@2] Detected VIPT I-cache on CPU2 [ 0.318007@2] CPU2: update cpu_capacity 1024 [ 0.318010@2] CPU2: Booted secondary processor [410fd034] [ 0.346022@3] Detected VIPT I-cache on CPU3 [ 0.346073@3] CPU3: update cpu_capacity 1024 [ 0.346075@3] CPU3: Booted secondary processor [410fd034] [ 0.346165@0] Brought up 4 CPUs [ 0.385386@0] SMP: Total of 4 processors activated. [ 0.390295@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396330@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407295@0] CPU: All CPU(s) started at EL2 [ 0.408072@0] alternatives: patching kernel code [ 0.413473@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420611@0] devtmpfs: initialized [ 0.436046@0] DMI not present or invalid. [ 0.436430@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444432@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.450994@0] pinctrl core: initialized pinctrl subsystem [ 0.457605@0] NET: Registered protocol family 16 [ 0.480959@3] cpuidle: using governor menu [ 0.481109@3] register canvas platform driver [ 0.483828@3] register rdma platform driver [ 0.489295@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495662@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503114@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509220@3] clkmsr: clkmsr: driver init [ 0.512948@3] codec_mm_module_init [ 0.516391@3] media_configs_system_init [ 0.520535@3] aml_watch_point_probe, in, wp:2 [ 0.525199@3] pstore: using zlib compression [ 0.529445@3] console [pstore-1] enabled [ 0.532781@3] pstore: Registered ramoops as persistent store backend [ 0.539187@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553237@3] aml_iomap: amlogic iomap probe done [ 0.557928@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559839@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568830@3] audio_clocks: audio_clocks_probe done [ 0.577531@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577588@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582744@3] amlogic auge_snd_iomap probe done [ 0.849929@3] vgaarb: loaded [ 0.850336@3] SCSI subsystem initialized [ 0.851444@3] usbcore: registered new interface driver usbfs [ 0.856926@3] usbcore: registered new interface driver hub [ 0.862436@3] usbcore: registered new device driver usb [ 0.867713@3] Linux video capture interface: v2.00 [ 0.872467@3] pps_core: LinuxPPS API ver. 1 registered [ 0.877560@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.886937@3] PTP clock support registered [ 0.895274@3] dmi: Firmware registration failed. [ 0.896050@3] secmon: reserve_mem_size:0x300000 [ 0.900270@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.907152@3] secmon: get page:ffffffbf00140000, 5000 [ 0.911925@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.920317@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.927047@3] fb: osd_init_module [ 0.931550@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.937111@3] Bluetooth: Core ver 2.22 [ 0.940235@3] NET: Registered protocol family 31 [ 0.944828@3] Bluetooth: HCI device and connection manager initialized [ 0.951391@3] Bluetooth: HCI socket layer initialized [ 0.956453@3] Bluetooth: L2CAP socket layer initialized [ 0.961750@3] Bluetooth: SCO socket layer initialized [ 0.970839@3] NetLabel: Initializing [ 0.970873@3] NetLabel: domain hash size = 128 [ 0.974917@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.980147@3] NetLabel: unlabeled traffic allowed by default [ 0.987620@2] clocksource: Switched to clocksource arch_sys_counter [ 1.088078@2] VFS: Disk quotas dquot_6.6.0 [ 1.088186@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.107496@3] NET: Registered protocol family 2 [ 1.108179@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.113702@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.120365@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.126989@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.132925@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.139570@3] NET: Registered protocol family 1 [ 1.144417@3] RPC: Registered named UNIX socket transport module. [ 1.150071@3] RPC: Registered udp transport module. [ 1.154948@3] RPC: Registered tcp transport module. [ 1.159848@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.167961@3] Unpacking initramfs... [ 1.269389@3] Freeing initrd memory: 2308K [ 1.270806@3] hw perfevents: clusterb_enabled = 0 [ 1.272639@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.277076@3] hw perfevents: cluster A irq = 7 [ 1.281642@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.290971@3] audit: initializing netlink subsys (disabled) [ 1.295152@3] audit: type=2000 audit(1.140:1): initialized [ 1.301796@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.322716@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.328732@3] NFS: Registering the id_resolver key type [ 1.328793@3] Key type id_resolver registered [ 1.332744@3] Key type id_legacy registered [ 1.337241@3] fuse init (API version 7.26) [ 1.345940@3] NET: Registered protocol family 38 [ 1.345985@3] Key type asymmetric registered [ 1.349985@3] Asymmetric key parser 'x509' registered [ 1.355328@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.362673@3] io scheduler noop registered (default) [ 1.367644@3] io scheduler deadline registered [ 1.372379@3] io scheduler cfq registered [ 1.386698@1] random: fast init done [ 1.386765@1] random: crng init done [ 1.387302@3] Unable to detect cache hierarchy for CPU 0 [ 1.429374@3] loop: module loaded [ 1.434334@3] zram: Added device: zram0 [ 1.434759@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.440177@3] libphy: Fixed MDIO Bus: probed [ 1.444053@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.448747@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.456356@3] PPP generic driver version 2.4.2 [ 1.459848@3] PPP BSD Compression module registered [ 1.464487@3] PPP Deflate Compression module registered [ 1.469739@3] PPP MPPE Compression module registered [ 1.474703@3] NET: Registered protocol family 24 [ 1.479498@3] usbcore: registered new interface driver asix [ 1.485076@3] usbcore: registered new interface driver ax88179_178a [ 1.491337@3] usbcore: registered new interface driver cdc_ether [ 1.497362@3] usbcore: registered new interface driver net1080 [ 1.503224@3] usbcore: registered new interface driver cdc_subset [ 1.509358@3] usbcore: registered new interface driver zaurus [ 1.515143@3] usbcore: registered new interface driver cdc_ncm [ 1.521578@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.527670@3] ehci-pci: EHCI PCI platform driver [ 1.532405@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.538714@3] ohci-pci: OHCI PCI platform driver [ 1.543906@3] usbcore: registered new interface driver cdc_acm [ 1.549180@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.557534@3] usbcore: registered new interface driver usb-storage [ 1.563773@3] usbcore: registered new interface driver usbserial [ 1.570241@0] mousedev: PS/2 mouse device common for all mice [ 1.575926@0] usbcore: registered new interface driver xpad [ 1.581269@3] i2c /dev entries driver [ 1.584862@3] usbcore: registered new interface driver uvcvideo [ 1.590663@3] USB Video Class driver (1.1.1) [ 1.594931@3] md: linear personality registered for level -1 [ 1.601130@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.610804@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.616595@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.624437@1] usbcore: registered new interface driver usbhid [ 1.628300@1] usbhid: USB HID core driver [ 1.632539@2] ashmem: initialized [ 1.636015@2] logger: created 512K log 'log_main' [ 1.640545@1] logger: created 1K log 'log_events' [ 1.645266@1] logger: created 1K log 'log_radio' [ 1.649908@1] logger: created 16K log 'log_system' [ 1.654531@1] exFAT: Version 1.3.0 [ 1.659194@1] ff803000.serial: clock gate not found [ 1.662904@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.670062@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.685041@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.687629@1] console [ttyS0] enabled [ 1.687629@1] console [ttyS0] enabled [ 1.694832@1] bootconsole [aml_uart0] disabled [ 1.694832@1] bootconsole [aml_uart0] disabled [ 1.704337@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.710783@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.721115@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.730880@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.737424@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.749782@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.753916@1] irq = 20 [ 1.756225@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.765051@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.769488@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.774631@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.781131@1] meson-remote: Driver init [ 1.785109@1] meson-remote: remote_probe [ 1.788709@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.793772@1] meson-remote ff808040.rc: don't find the node [ 1.800324@1] meson-remote ff808040.rc: led_blink = 0 [ 1.805324@1] meson-remote ff808040.rc: don't find the node [ 1.812219@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.817865@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.823562@1] meson-remote ff808040.rc: custom_number = 3 [ 1.828881@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.834561@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.841719@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.848013@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.854160@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.859830@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.866988@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.873284@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.879433@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.885102@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.892259@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.898555@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.904685@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.911407@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.917185@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.922963@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.928656@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.934349@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.940300@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.946165@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.951771@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.957119@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.962466@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.968544@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.975471@0] meson-remote: IR XMP protocol handler initialized [ 1.981122@0] efusekeynum: 4 [ 1.983645@0] efusekeyname: mac offset: 0 size: 6 [ 1.990007@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.996379@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.002754@0] efusekeyname: usid offset: 18 size: 16 [ 2.009387@1] efuse efuse: probe OK! [ 2.014975@2] ge2d: ge2d_init_module [ 2.016779@2] [tsync_pcr_init]init success. [ 2.021262@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.027805@1] DI: di_module_init ok. [ 2.030817@1] dim:dim_module_init [ 2.034118@1] dim:dim_module_init finish [ 2.037839@1] dil:dil_init. [ 2.040745@1] dil:dil_init ok. [ 2.043576@1] vdin_drv_init: major 241 [ 2.047531@1] vdin_drv_init: vdin driver init done [ 2.052018@1] [viuin..]viuin_init_module viuin module init [ 2.057854@1] [viuin..]viuin_probe probe ok. [ 2.061933@1] amlvid:info: amlvideo_init called[ 2.065987@1] amlvid:info: amlvideo_create_instance called [ 2.071408@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.076751@2] amlvideo-000: V4L2 device registered as video10 [ 2.082197@2] amlvid:info: amlvideo_create_instance called [ 2.087622@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.092946@3] amlvideo-001: V4L2 device registered as video23 [ 2.098707@3] PPMGRDRV: warn: ppmgr module init func called [ 2.104942@0] videosync_create_instance dev_s ffffffc01c9b8400,dev_s->dev ffffffc01d9fde80 [ 2.112135@0] videosync_create_instance reg videosync.0 [ 2.117383@0] aml_vecm_init:module init [ 2.117495@3] videosync_thread started [ 2.125132@0] amdolby_vision_init:module init [ 2.129402@0] prime_sl module init [ 2.133039@0] amlogic mtd driver init [ 2.136732@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.141968@0] bl mode descrete [ 2.144888@0] fip_copies 4 [ 2.147550@0] fip_size 0x200000 [ 2.150668@0] nand_clk_ctrl 0xffe07000 [ 2.154372@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.160005@0] nand_clk_ctrl 0xffe07000 [ 2.163704@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.172031@0] plat->aml_nand_device ffffff800a778cf8 [ 2.176561@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.182551@0] NAND device id: c2 dc 90 a2 57 3 [ 2.186726@0] NAND device: Manufacturer ID: [ 2.190772@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.197431@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.202930@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.208452@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.214753@0] mtd->oobavail: 0x10 [ 2.218670@3] aml_nand_init 2119: plat-name:bootloader [ 2.223134@3] Creating 1 MTD partitions on "bootloader": [ 2.228381@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.236152@3] bootloader initialized ok [ 2.237605@3] plat->aml_nand_device ffffff800a778cf8 [ 2.242542@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.248572@3] NAND device id: c2 dc 90 a2 57 3 [ 2.252705@3] NAND device: Manufacturer ID: [ 2.256757@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.263412@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.268915@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.274433@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.280739@3] mtd->oobavail: 0x10 [ 2.284208@3] aml_nand_init 2119: plat-name:nandnormal [ 2.289122@3] bbt_start=20 [ 2.291769@3] env_start=24 [ 2.294433@3] key_start=32 [ 2.297116@3] dtb_start=40 [ 2.299788@3] ddr_start=44 [ 2.302456@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.308942@3] get_free_node 43: bitmap=0 [ 2.312383@3] get_free_node 55: bitmap=1 [ 2.316467@3] get_free_node 43: bitmap=1 [ 2.320145@3] get_free_node 55: bitmap=3 [ 2.324229@3] get_free_node 43: bitmap=3 [ 2.327907@3] get_free_node 55: bitmap=7 [ 2.331788@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.338428@3] nbbt free list: [ 2.341361@3] blockN=21, ec=-1, dirty_flag=0 [ 2.345587@3] blockN=22, ec=-1, dirty_flag=0 [ 2.349813@3] blockN=23, ec=-1, dirty_flag=0 [ 2.354040@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.359448@3] nbbt valid addr: 500000 [ 2.362667@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.368273@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.374514@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.380924@3] get_free_node 43: bitmap=7 [ 2.384401@3] get_free_node 55: bitmap=f [ 2.388485@3] get_free_node 43: bitmap=f [ 2.392163@3] get_free_node 55: bitmap=1f [ 2.396333@3] get_free_node 43: bitmap=1f [ 2.400098@3] get_free_node 55: bitmap=3f [ 2.404268@3] get_free_node 43: bitmap=3f [ 2.408033@3] get_free_node 55: bitmap=7f [ 2.412203@3] get_free_node 43: bitmap=7f [ 2.415968@3] get_free_node 55: bitmap=ff [ 2.420138@3] get_free_node 43: bitmap=ff [ 2.423903@3] get_free_node 55: bitmap=1ff [ 2.428160@3] get_free_node 43: bitmap=1ff [ 2.432009@3] get_free_node 55: bitmap=3ff [ 2.436064@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.442704@3] nenv free list: [ 2.445637@3] blockN=25, ec=-1, dirty_flag=0 [ 2.449863@3] blockN=26, ec=-1, dirty_flag=0 [ 2.454089@3] blockN=27, ec=-1, dirty_flag=0 [ 2.458316@3] blockN=28, ec=-1, dirty_flag=0 [ 2.462542@3] blockN=29, ec=-1, dirty_flag=0 [ 2.466768@3] blockN=30, ec=-1, dirty_flag=0 [ 2.470995@3] blockN=31, ec=-1, dirty_flag=0 [ 2.475221@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.486962@3] nenv valid addr: 610000 [ 2.486981@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.491416@3] get_free_node 43: bitmap=3ff [ 2.495271@3] get_free_node 55: bitmap=7ff [ 2.499524@3] get_free_node 43: bitmap=7ff [ 2.503374@3] get_free_node 55: bitmap=fff [ 2.507638@3] get_free_node 43: bitmap=fff [ 2.511473@3] get_free_node 55: bitmap=1fff [ 2.515824@3] get_free_node 43: bitmap=1fff [ 2.519761@3] get_free_node 55: bitmap=3fff [ 2.524104@3] get_free_node 43: bitmap=3fff [ 2.528041@3] get_free_node 55: bitmap=7fff [ 2.532384@3] get_free_node 43: bitmap=7fff [ 2.536321@3] get_free_node 55: bitmap=ffff [ 2.540664@3] get_free_node 43: bitmap=ffff [ 2.544601@3] get_free_node 55: bitmap=1ffff [ 2.549031@3] get_free_node 43: bitmap=1ffff [ 2.553054@3] get_free_node 55: bitmap=3ffff [ 2.557279@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.563920@3] nkey free list: [ 2.566845@3] blockN=32, ec=-1, dirty_flag=0 [ 2.571079@3] blockN=33, ec=-1, dirty_flag=0 [ 2.575305@3] blockN=34, ec=-1, dirty_flag=0 [ 2.579531@3] blockN=35, ec=-1, dirty_flag=0 [ 2.583790@3] blockN=36, ec=-1, dirty_flag=0 [ 2.587985@3] blockN=37, ec=-1, dirty_flag=0 [ 2.592211@3] blockN=38, ec=-1, dirty_flag=0 [ 2.596436@3] blockN=39, ec=-1, dirty_flag=0 [ 2.600663@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.605751@3] nkey valid addr: fffffffffffc0000 [ 2.610236@3] aml_nand_key_check 1251 NO key exist [ 2.614982@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.621598@3] get_free_node 43: bitmap=3ffff [ 2.625418@3] get_free_node 55: bitmap=7ffff [ 2.629846@3] get_free_node 43: bitmap=7ffff [ 2.633870@3] get_free_node 55: bitmap=fffff [ 2.638299@3] get_free_node 43: bitmap=fffff [ 2.642323@3] get_free_node 55: bitmap=1fffff [ 2.646647@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.653275@3] ndtb free list: [ 2.656208@3] blockN=41, ec=-1, dirty_flag=0 [ 2.660434@3] blockN=42, ec=-1, dirty_flag=0 [ 2.664660@3] blockN=43, ec=-1, dirty_flag=0 [ 2.668887@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.686895@3] ndtb valid addr: a00000 [ 2.686915@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.691343@3] get_free_node 43: bitmap=1fffff [ 2.695453@3] get_free_node 55: bitmap=3fffff [ 2.699968@3] get_free_node 43: bitmap=3fffff [ 2.704078@3] get_free_node 55: bitmap=7fffff [ 2.708390@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.715030@3] nddr free list: [ 2.717963@3] blockN=44, ec=-1, dirty_flag=0 [ 2.722189@3] blockN=45, ec=-1, dirty_flag=0 [ 2.726415@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.731504@3] nddr valid addr: fffffffffffc0000 [ 2.735990@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.740735@3] tpl: off 16777216, size 8388608 [ 2.807230@3] Creating 7 MTD partitions on "nandnormal": [ 2.807279@3] 0x000001000000-0x000001800000 : "tpl" [ 2.814543@2] 0x000001800000-0x000001a00000 : "misc" [ 2.822135@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.823500@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.834070@1] 0x000002c00000-0x000003b00000 : "boot" [ 2.837179@3] 0x000003b00000-0x000015300000 : "system" [ 2.875485@3] 0x000015300000-0x000020000000 : "data" [ 2.902987@3] nandnormal initialized ok [ 2.903068@3] aml_ubootenv_init: register env chardev [ 2.906429@3] aml_ubootenv_init: register env chardev OK [ 2.911705@3] amlnf_dtb_init: register dtb cdev [ 2.916163@3] amlnf_dtb_init: register dtd cdev OK [ 2.920730@3] mtd_nand_probe 267 , err = 0 [ 2.925437@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.931051@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.938143@3] unifykey: storage in base: 0xffffffc005000000 [ 2.942809@3] unifykey: storage out base: 0xffffffc005040000 [ 2.948381@3] unifykey: storage block base: 0xffffffc005080000 [ 2.954162@3] unifykey: probe done! [ 2.958060@3] unifykey: no efuse-version set, use default value: -1 [ 2.963840@3] unifykey: key unify config unifykey-num is 6 [ 2.969294@3] unifykey: key unify fact unifykey-num is 6 [ 2.974521@3] unifykey: unifykey_devno: ee00000 [ 2.979365@3] unifykey: device unifykeys created ok [ 2.983919@3] unifykey: aml_unifykeys_init done! [ 2.988696@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.995435@3] amlkaraoke init success! [ 2.998200@3] sysled: module init [ 3.001595@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.006535@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.014031@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.020194@3] amlogic rfkill init [ 3.025017@3] dmc_monitor_probe [ 3.026583@3] page_trace_module_init, create sysfs failed [ 3.036959@3] defendkey defendkey: Reserved memory is not enough! [ 3.037747@3] defendkey: probe of defendkey failed with error -22 [ 3.044776@3] usbcore: registered new interface driver snd-usb-audio [ 3.054072@3] asoc debug: aml_audio_controller_probe-130 [ 3.055860@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.061177@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.068953@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.076132@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.082503@3] aml_tdm_platform_probe(), share en = 1[ 3.087248@3] No channel mask node Channel_Mask [ 3.092060@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.097564@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.105514@3] aml_tdm_platform_probe(), share en = 1[ 3.110022@3] No channel mask node Channel_Mask [ 3.114732@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.120327@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.128282@3] aml_tdm_platform_probe(), share en = 1[ 3.132788@3] No channel mask node Channel_Mask [ 3.138407@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.145441@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.153526@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.163640@3] Register vad [ 3.164604@3] check whether to update sound card init data [ 3.170412@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.177404@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.184708@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.190327@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.197991@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.205323@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.211193@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.217683@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.224819@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.230743@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.237635@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.243443@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.250204@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.258874@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.265009@3] snd_card_add_kcontrols card:ffffffc01c9f5818 [ 3.270052@3] effect_v2 is not init [ 3.273476@3] Failed to add VAD controls [ 3.277715@3] GACT probability NOT on [ 3.281000@3] Mirror/redirect action on [ 3.284764@3] u32 classifier [ 3.287593@3] Actions configured [ 3.291149@3] Netfilter messages via NETLINK v0.30. [ 3.296217@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.302414@3] ctnetlink v0.93: registering with nfnetlink. [ 3.308149@0] xt_time: kernel timezone is -0000 [ 3.312115@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.318300@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.323313@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.328894@0] Initializing XFRM netlink socket [ 3.333878@0] NET: Registered protocol family 10 [ 3.339060@0] mip6: Mobile IPv6 [ 3.340959@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.346737@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.353759@0] NET: Registered protocol family 17 [ 3.357089@0] NET: Registered protocol family 15 [ 3.361655@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.374759@0] Bluetooth: RFCOMM TTY layer initialized [ 3.379652@0] Bluetooth: RFCOMM socket layer initialized [ 3.384929@0] Bluetooth: RFCOMM ver 1.11 [ 3.388783@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.394210@0] Bluetooth: BNEP filters: protocol multicast [ 3.399561@0] Bluetooth: BNEP socket layer initialized [ 3.404646@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.410687@0] Bluetooth: HIDP socket layer initialized [ 3.415867@0] l2tp_core: L2TP core driver, V2.0 [ 3.420270@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.425172@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.430897@0] l2tp_netlink: L2TP netlink interface [ 3.435658@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.441677@0] l2tp_debugfs: L2TP debugfs support [ 3.446217@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.452831@0] NET: Registered protocol family 35 [ 3.457578@0] Key type dns_resolver registered [ 3.462746@0] Registered swp emulation handler [ 3.466241@0] Registered cp15_barrier emulation handler [ 3.471384@0] Registered setend emulation handler [ 3.476036@0] disable EAS feature [ 3.480372@1] registered taskstats version 1 [ 3.492962@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.999174@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.999233@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.007372@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.015849@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.022728@3] hub 1-0:1.0: USB hub found [ 4.025806@3] hub 1-0:1.0: 1 port detected [ 4.030089@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.035362@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.043179@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.052135@0] hub 2-0:1.0: USB hub found [ 4.055222@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.062562@0] usb usb2: Unsupported the hub [ 4.067067@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.075074@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.183639@0] dwc_otg: Core Release: 3.10a [ 4.183680@0] dwc_otg: Setting default values for core params [ 4.187834@0] dwc_otg: curmode: 0, host_only: 0 [ 4.204635@0] dwc_otg: Using Buffer DMA mode [ 4.204657@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.208536@0] dwc_otg: Working on port type = SLAVE [ 4.213375@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.220398@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.229932@0] gxbb_pm: enter meson_pm_probe! [ 4.229972@0] no vddio3v3_en pin[ 4.231644@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.236652@0] gxbb_pm: meson_pm_probe done [ 4.24102[ 4.247286@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.252726@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.462803@2] ubi0: attaching mtd6 [ 4.991209@2] ubi0: scanning is finished [ 4.995367@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.995686@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.002646@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.009560@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.016625@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.022825@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.030157@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.039390@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.048801@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.054578@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.099460@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.101422@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.111407@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.122178@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.128130@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.311904@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.372500@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.456725@2] ubi1: attaching mtd7 [ 5.783016@2] ubi1: scanning is finished [ 5.786787@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.787013@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.794023@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.800908@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.807974@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.814102@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.821430@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.830662@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.839986@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.849337@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.872897@1] UBIFS (ubi1:0): recovery needed [ 5.952031@2] UBIFS (ubi1:0): recovery completed [ 5.952185@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.958371@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.968368@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.979088@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.985792@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bad450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 7.023165@0] aml_tdm_open [ 7.030277@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.030317@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.035009@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.035013@3] cpufreq_interactive: no need to active hmp boost! [ 7.048336@0] aml_tdm_open [ 7.049988@0] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.144895@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.148561@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.154770@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.203406@3] asoc-aml-card auge_sound: tdm playback enable [ 7.238183@2] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894068 [ 7.238588@2] asoc-aml-card auge_sound: tdm capture stop [ 7.243974@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.249387@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.255197@3] asoc-aml-card auge_sound: tdm capture enable [ 7.267650@1] asoc-aml-card auge_sound: tdm playback stop [ 7.313836@3] asoc-aml-card auge_sound: tdm playback enable [ 8.607880@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.346155@2] asoc-aml-card auge_sound: tdm playback stop [ 13.346482@1] asoc-aml-card auge_sound: tdm capture stop [ 13.351589@1] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.341434@2] mtd_nand_reboot_notifier 35 [ 15.341695@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.349780@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.353374@2] usb usb2: USB disconnect, device number 1 [ 15.363135@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.364233@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.369468@3] usb usb1: USB disconnect, device number 1 [ 15.378708@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.399710@0] reboot: Restarting system [ 15.400158@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22028 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015877 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1976008 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016834@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129137@0] ftrace: allocating 43519 entries in 170 pages [ 0.209527@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210334@0] CPU0: update cpu_capacity 1024 [ 0.214659@0] ASID allocator initialised with 32768 entries [ 0.252639@0] secmon: can't fine clear_range [ 0.253232@0] EFI services will not be available. [ 0.256067@0] Meson chip version = RevC (25:C - 43:0) [ 0.289997@1] Detected VIPT I-cache on CPU1 [ 0.290058@1] CPU1: update cpu_capacity 1024 [ 0.290060@1] CPU1: Booted secondary processor [410fd034] [ 0.318036@2] Detected VIPT I-cache on CPU2 [ 0.318088@2] CPU2: update cpu_capacity 1024 [ 0.318090@2] CPU2: Booted secondary processor [410fd034] [ 0.346113@3] Detected VIPT I-cache on CPU3 [ 0.346162@3] CPU3: update cpu_capacity 1024 [ 0.346164@3] CPU3: Booted secondary processor [410fd034] [ 0.346256@0] Brought up 4 CPUs [ 0.385473@0] SMP: Total of 4 processors activated. [ 0.390382@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396418@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407377@0] CPU: All CPU(s) started at EL2 [ 0.408157@0] alternatives: patching kernel code [ 0.413565@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420692@0] devtmpfs: initialized [ 0.436132@0] DMI not present or invalid. [ 0.436529@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444520@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451083@0] pinctrl core: initialized pinctrl subsystem [ 0.457670@0] NET: Registered protocol family 16 [ 0.485021@0] cpuidle: using governor menu [ 0.485166@0] register canvas platform driver [ 0.487887@0] register rdma platform driver [ 0.493458@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499727@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507181@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513260@3] clkmsr: clkmsr: driver init [ 0.516977@3] codec_mm_module_init [ 0.520500@3] media_configs_system_init [ 0.524609@3] aml_watch_point_probe, in, wp:2 [ 0.530098@3] pstore: using zlib compression [ 0.533512@3] console [pstore-1] enabled [ 0.536840@3] pstore: Registered ramoops as persistent store backend [ 0.543243@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557289@3] aml_iomap: amlogic iomap probe done [ 0.561965@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563890@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572883@3] audio_clocks: audio_clocks_probe done [ 0.581532@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581587@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586741@3] amlogic auge_snd_iomap probe done [ 0.861641@3] vgaarb: loaded [ 0.862050@3] SCSI subsystem initialized [ 0.863121@3] usbcore: registered new interface driver usbfs [ 0.868643@3] usbcore: registered new interface driver hub [ 0.874160@3] usbcore: registered new device driver usb [ 0.879432@3] Linux video capture interface: v2.00 [ 0.884198@3] pps_core: LinuxPPS API ver. 1 registered [ 0.889262@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898640@3] PTP clock support registered [ 0.906963@3] dmi: Firmware registration failed. [ 0.911035@3] secmon: reserve_mem_size:0x300000 [ 0.911960@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.918910@3] secmon: get page:ffffffbf00140000, 5000 [ 0.923640@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932033@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938759@3] fb: osd_init_module [ 0.943231@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.948828@3] Bluetooth: Core ver 2.22 [ 0.951971@3] NET: Registered protocol family 31 [ 0.956551@3] Bluetooth: HCI device and connection manager initialized [ 0.963104@3] Bluetooth: HCI socket layer initialized [ 0.968174@3] Bluetooth: L2CAP socket layer initialized [ 0.973459@3] Bluetooth: SCO socket layer initialized [ 0.979049@3] NetLabel: Initializing [ 0.982070@3] NetLabel: domain hash size = 128 [ 0.986713@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.991871@3] NetLabel: unlabeled traffic allowed by default [ 0.999323@1] clocksource: Switched to clocksource arch_sys_counter [ 1.099798@1] VFS: Disk quotas dquot_6.6.0 [ 1.099906@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118501@2] NET: Registered protocol family 2 [ 1.119222@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.124756@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131370@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.137977@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.143932@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.150589@2] NET: Registered protocol family 1 [ 1.155448@2] RPC: Registered named UNIX socket transport module. [ 1.161068@2] RPC: Registered udp transport module. [ 1.165955@2] RPC: Registered tcp transport module. [ 1.170859@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.178923@2] Unpacking initramfs... [ 1.280378@2] Freeing initrd memory: 2308K [ 1.281806@2] hw perfevents: clusterb_enabled = 0 [ 1.283717@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.288084@2] hw perfevents: cluster A irq = 7 [ 1.292601@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.301958@2] audit: initializing netlink subsys (disabled) [ 1.306128@2] audit: type=2000 audit(1.140:1): initialized [ 1.312791@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.333724@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.339765@2] NFS: Registering the id_resolver key type [ 1.339831@2] Key type id_resolver registered [ 1.343753@2] Key type id_legacy registered [ 1.348243@2] fuse init (API version 7.26) [ 1.356753@2] NET: Registered protocol family 38 [ 1.356799@2] Key type asymmetric registered [ 1.360991@2] Asymmetric key parser 'x509' registered [ 1.366347@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.373683@2] io scheduler noop registered (default) [ 1.378691@2] io scheduler deadline registered [ 1.383356@2] io scheduler cfq registered [ 1.398168@1] random: fast init done [ 1.398237@1] random: crng init done [ 1.398723@2] Unable to detect cache hierarchy for CPU 0 [ 1.422798@2] loop: module loaded [ 1.427831@2] zram: Added device: zram0 [ 1.428248@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.433471@2] libphy: Fixed MDIO Bus: probed [ 1.437509@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.442285@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.449830@2] PPP generic driver version 2.4.2 [ 1.453381@2] PPP BSD Compression module registered [ 1.457983@2] PPP Deflate Compression module registered [ 1.463232@2] PPP MPPE Compression module registered [ 1.468206@2] NET: Registered protocol family 24 [ 1.472986@2] usbcore: registered new interface driver asix [ 1.478566@2] usbcore: registered new interface driver ax88179_178a [ 1.484838@2] usbcore: registered new interface driver cdc_ether [ 1.490856@2] usbcore: registered new interface driver net1080 [ 1.496735@2] usbcore: registered new interface driver cdc_subset [ 1.502849@2] usbcore: registered new interface driver zaurus [ 1.508640@2] usbcore: registered new interface driver cdc_ncm [ 1.515090@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.521159@2] ehci-pci: EHCI PCI platform driver [ 1.525890@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.532241@2] ohci-pci: OHCI PCI platform driver [ 1.537372@2] usbcore: registered new interface driver cdc_acm [ 1.542687@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.551008@2] usbcore: registered new interface driver usb-storage [ 1.557255@2] usbcore: registered new interface driver usbserial [ 1.563750@2] mousedev: PS/2 mouse device common for all mice [ 1.569307@2] usbcore: registered new interface driver xpad [ 1.574763@2] i2c /dev entries driver [ 1.578365@2] usbcore: registered new interface driver uvcvideo [ 1.584157@2] USB Video Class driver (1.1.1) [ 1.588428@2] md: linear personality registered for level -1 [ 1.594623@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.604272@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.610112@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.617858@0] usbcore: registered new interface driver usbhid [ 1.621802@0] usbhid: USB HID core driver [ 1.626034@0] ashmem: initialized [ 1.629505@0] logger: created 512K log 'log_main' [ 1.634042@0] logger: created 1K log 'log_events' [ 1.638964@0] logger: created 1K log 'log_radio' [ 1.643461@1] logger: created 16K log 'log_system' [ 1.648041@1] exFAT: Version 1.3.0 [ 1.652741@3] ff803000.serial: clock gate not found [ 1.656401@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.663574@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.678539@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.681128@3] console [ttyS0] enabled [ 1.681128@3] console [ttyS0] enabled [ 1.688332@3] bootconsole [aml_uart0] disabled [ 1.688332@3] bootconsole [aml_uart0] disabled [ 1.697847@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.704304@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.714584@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.724375@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.730909@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.743292@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.747377@3] irq = 20 [ 1.749704@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.758588@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.762962@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.768158@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.774634@3] meson-remote: Driver init [ 1.778625@3] meson-remote: remote_probe [ 1.782208@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.787267@3] meson-remote ff808040.rc: don't find the node [ 1.793820@3] meson-remote ff808040.rc: led_blink = 0 [ 1.798821@3] meson-remote ff808040.rc: don't find the node [ 1.805721@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.811359@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.817062@3] meson-remote ff808040.rc: custom_number = 3 [ 1.822378@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.828061@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.835216@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.841513@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.847679@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.853333@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.860487@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.866783@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.872928@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.878600@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.885758@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.892054@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.898181@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.904906@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.910684@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.916462@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.922154@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.927847@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.933798@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.939663@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.945269@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.950617@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.955964@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.962032@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.968965@2] meson-remote: IR XMP protocol handler initialized [ 1.974629@2] efusekeynum: 4 [ 1.977148@2] efusekeyname: mac offset: 0 size: 6 [ 1.983491@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.989873@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.996253@2] efusekeyname: usid offset: 18 size: 16 [ 2.002932@1] efuse efuse: probe OK! [ 2.008697@0] ge2d: ge2d_init_module [ 2.010215@0] [tsync_pcr_init]init success. [ 2.014771@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.021225@0] DI: di_module_init ok. [ 2.024385@0] dim:dim_module_init [ 2.027631@0] dim:dim_module_init finish [ 2.031257@0] dil:dil_init. [ 2.034257@0] dil:dil_init ok. [ 2.037110@0] vdin_drv_init: major 241 [ 2.041027@0] vdin_drv_init: vdin driver init done [ 2.045509@0] [viuin..]viuin_init_module viuin module init [ 2.051357@0] [viuin..]viuin_probe probe ok. [ 2.055419@0] amlvid:info: amlvideo_init called[ 2.059474@0] amlvid:info: amlvideo_create_instance called [ 2.064900@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.070267@2] amlvideo-000: V4L2 device registered as video10 [ 2.075720@2] amlvid:info: amlvideo_create_instance called [ 2.081121@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.086427@1] amlvideo-001: V4L2 device registered as video23 [ 2.092200@1] PPMGRDRV: warn: ppmgr module init func called [ 2.098344@3] videosync_create_instance dev_s ffffffc01d48f800,dev_s->dev ffffffc01cf36a80 [ 2.105654@3] videosync_create_instance reg videosync.0 [ 2.110888@3] aml_vecm_init:module init [ 2.110889@2] videosync_thread started [ 2.118612@3] amdolby_vision_init:module init [ 2.122904@3] prime_sl module init [ 2.126532@3] amlogic mtd driver init [ 2.130227@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.135459@3] bl mode descrete [ 2.138375@3] fip_copies 4 [ 2.141062@3] fip_size 0x200000 [ 2.144163@3] nand_clk_ctrl 0xffe07000 [ 2.147871@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.153502@3] nand_clk_ctrl 0xffe07000 [ 2.157200@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.165523@3] plat->aml_nand_device ffffff800a778cf8 [ 2.170045@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.176033@3] NAND device id: c2 dc 90 a2 57 3 [ 2.180222@3] NAND device: Manufacturer ID: [ 2.184271@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.190929@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.196429@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.201950@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.208270@3] mtd->oobavail: 0x10 [ 2.211835@2] aml_nand_init 2119: plat-name:bootloader [ 2.216635@2] Creating 1 MTD partitions on "bootloader": [ 2.221879@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.229242@2] bootloader initialized ok [ 2.231103@2] plat->aml_nand_device ffffff800a778cf8 [ 2.236041@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.242068@2] NAND device id: c2 dc 90 a2 57 3 [ 2.246203@2] NAND device: Manufacturer ID: [ 2.250255@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.256909@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.262414@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.267932@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.274239@2] mtd->oobavail: 0x10 [ 2.277704@2] aml_nand_init 2119: plat-name:nandnormal [ 2.282637@2] bbt_start=20 [ 2.285266@2] env_start=24 [ 2.287939@2] key_start=32 [ 2.290605@2] dtb_start=40 [ 2.293286@2] ddr_start=44 [ 2.295962@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.302443@2] get_free_node 43: bitmap=0 [ 2.305881@2] get_free_node 55: bitmap=1 [ 2.309966@2] get_free_node 43: bitmap=1 [ 2.313643@2] get_free_node 55: bitmap=3 [ 2.317726@2] get_free_node 43: bitmap=3 [ 2.321405@2] get_free_node 55: bitmap=7 [ 2.325287@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.331926@2] nbbt free list: [ 2.334852@2] blockN=21, ec=-1, dirty_flag=0 [ 2.339085@2] blockN=22, ec=-1, dirty_flag=0 [ 2.343315@2] blockN=23, ec=-1, dirty_flag=0 [ 2.347538@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.352947@2] nbbt valid addr: 500000 [ 2.356165@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.361771@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.368012@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.374422@2] get_free_node 43: bitmap=7 [ 2.377899@2] get_free_node 55: bitmap=f [ 2.381983@2] get_free_node 43: bitmap=f [ 2.385661@2] get_free_node 55: bitmap=1f [ 2.389831@2] get_free_node 43: bitmap=1f [ 2.393606@2] get_free_node 55: bitmap=3f [ 2.397768@2] get_free_node 43: bitmap=3f [ 2.401531@2] get_free_node 55: bitmap=7f [ 2.405701@2] get_free_node 43: bitmap=7f [ 2.409465@2] get_free_node 55: bitmap=ff [ 2.413636@2] get_free_node 43: bitmap=ff [ 2.417401@2] get_free_node 55: bitmap=1ff [ 2.421657@2] get_free_node 43: bitmap=1ff [ 2.425509@2] get_free_node 55: bitmap=3ff [ 2.429562@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.436203@2] nenv free list: [ 2.439128@2] blockN=25, ec=-1, dirty_flag=0 [ 2.443362@2] blockN=26, ec=-1, dirty_flag=0 [ 2.447588@2] blockN=27, ec=-1, dirty_flag=0 [ 2.451814@2] blockN=28, ec=-1, dirty_flag=0 [ 2.456040@2] blockN=29, ec=-1, dirty_flag=0 [ 2.460266@2] blockN=30, ec=-1, dirty_flag=0 [ 2.464493@2] blockN=31, ec=-1, dirty_flag=0 [ 2.468719@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.480458@2] nenv valid addr: 610000 [ 2.480478@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.484913@2] get_free_node 43: bitmap=3ff [ 2.488764@2] get_free_node 55: bitmap=7ff [ 2.493043@2] get_free_node 43: bitmap=7ff [ 2.496872@2] get_free_node 55: bitmap=fff [ 2.501128@2] get_free_node 43: bitmap=fff [ 2.504980@2] get_free_node 55: bitmap=1fff [ 2.509322@2] get_free_node 43: bitmap=1fff [ 2.513259@2] get_free_node 55: bitmap=3fff [ 2.517601@2] get_free_node 43: bitmap=3fff [ 2.521539@2] get_free_node 55: bitmap=7fff [ 2.525882@2] get_free_node 43: bitmap=7fff [ 2.529820@2] get_free_node 55: bitmap=ffff [ 2.534162@2] get_free_node 43: bitmap=ffff [ 2.538099@2] get_free_node 55: bitmap=1ffff [ 2.542528@2] get_free_node 43: bitmap=1ffff [ 2.546552@2] get_free_node 55: bitmap=3ffff [ 2.550778@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.557418@2] nkey free list: [ 2.560351@2] blockN=32, ec=-1, dirty_flag=0 [ 2.564578@2] blockN=33, ec=-1, dirty_flag=0 [ 2.568803@2] blockN=34, ec=-1, dirty_flag=0 [ 2.573030@2] blockN=35, ec=-1, dirty_flag=0 [ 2.577256@2] blockN=36, ec=-1, dirty_flag=0 [ 2.581482@2] blockN=37, ec=-1, dirty_flag=0 [ 2.585709@2] blockN=38, ec=-1, dirty_flag=0 [ 2.589935@2] blockN=39, ec=-1, dirty_flag=0 [ 2.594161@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.599249@2] nkey valid addr: fffffffffffc0000 [ 2.603736@2] aml_nand_key_check 1251 NO key exist [ 2.608479@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.615095@2] get_free_node 43: bitmap=3ffff [ 2.618916@2] get_free_node 55: bitmap=7ffff [ 2.623347@2] get_free_node 43: bitmap=7ffff [ 2.627382@2] get_free_node 55: bitmap=fffff [ 2.631843@2] get_free_node 43: bitmap=fffff [ 2.635829@2] get_free_node 55: bitmap=1fffff [ 2.640134@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.646773@2] ndtb free list: [ 2.649713@2] blockN=41, ec=-1, dirty_flag=0 [ 2.653933@2] blockN=42, ec=-1, dirty_flag=0 [ 2.658158@2] blockN=43, ec=-1, dirty_flag=0 [ 2.662385@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.680381@2] ndtb valid addr: a00000 [ 2.680402@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.684833@2] get_free_node 43: bitmap=1fffff [ 2.688942@2] get_free_node 55: bitmap=3fffff [ 2.693457@2] get_free_node 43: bitmap=3fffff [ 2.697566@2] get_free_node 55: bitmap=7fffff [ 2.701879@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.708520@2] nddr free list: [ 2.711452@2] blockN=44, ec=-1, dirty_flag=0 [ 2.715678@2] blockN=45, ec=-1, dirty_flag=0 [ 2.719905@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.724994@2] nddr valid addr: fffffffffffc0000 [ 2.729479@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.734225@2] tpl: off 16777216, size 8388608 [ 2.800450@2] Creating 7 MTD partitions on "nandnormal": [ 2.800480@2] 0x000001000000-0x000001800000 : "tpl" [ 2.807767@3] 0x000001800000-0x000001a00000 : "misc" [ 2.811374@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.816174@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.823239@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.828057@0] 0x000003b00000-0x000015300000 : "system" [ 2.866908@0] 0x000015300000-0x000020000000 : "data" [ 2.890320@0] nandnormal initialized ok [ 2.890411@0] aml_ubootenv_init: register env chardev [ 2.893777@0] aml_ubootenv_init: register env chardev OK [ 2.898995@0] amlnf_dtb_init: register dtb cdev [ 2.903517@0] amlnf_dtb_init: register dtd cdev OK [ 2.908060@0] mtd_nand_probe 267 , err = 0 [ 2.912801@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.918386@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.925191@0] unifykey: storage in base: 0xffffffc005000000 [ 2.930136@0] unifykey: storage out base: 0xffffffc005040000 [ 2.935728@0] unifykey: storage block base: 0xffffffc005080000 [ 2.941498@0] unifykey: probe done! [ 2.945394@0] unifykey: no efuse-version set, use default value: -1 [ 2.951173@0] unifykey: key unify config unifykey-num is 6 [ 2.956642@0] unifykey: key unify fact unifykey-num is 6 [ 2.961858@0] unifykey: unifykey_devno: ee00000 [ 2.966625@0] unifykey: device unifykeys created ok [ 2.971252@0] unifykey: aml_unifykeys_init done! [ 2.976032@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.982434@0] amlkaraoke init success! [ 2.985517@0] sysled: module init [ 2.988910@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.993873@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.001017@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.007519@0] amlogic rfkill init [ 3.012181@0] dmc_monitor_probe [ 3.013916@0] page_trace_module_init, create sysfs failed [ 3.019614@0] defendkey defendkey: Reserved memory is not enough! [ 3.025106@0] defendkey: probe of defendkey failed with error -22 [ 3.032096@0] usbcore: registered new interface driver snd-usb-audio [ 3.041365@0] asoc debug: aml_audio_controller_probe-130 [ 3.043168@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.048514@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.056303@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.063471@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.069847@0] aml_tdm_platform_probe(), share en = 1[ 3.074585@0] No channel mask node Channel_Mask [ 3.079377@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.084890@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.092845@0] aml_tdm_platform_probe(), share en = 1[ 3.097356@0] No channel mask node Channel_Mask [ 3.102088@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.107665@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.115612@0] aml_tdm_platform_probe(), share en = 1[ 3.120126@0] No channel mask node Channel_Mask [ 3.125730@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.132788@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.140864@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.150763@3] Register vad [ 3.151951@3] check whether to update sound card init data [ 3.157752@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.164741@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.172049@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.177663@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.185362@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.192664@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.198532@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.205022@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.212092@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.218079@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.224913@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.230776@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.237515@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.245035@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.252317@1] snd_card_add_kcontrols card:ffffffc01c990818 [ 3.257384@1] effect_v2 is not init [ 3.260837@1] Failed to add VAD controls [ 3.265054@1] GACT probability NOT on [ 3.268338@1] Mirror/redirect action on [ 3.272116@1] u32 classifier [ 3.274933@1] Actions configured [ 3.278489@1] Netfilter messages via NETLINK v0.30. [ 3.283554@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.289778@1] ctnetlink v0.93: registering with nfnetlink. [ 3.295491@2] xt_time: kernel timezone is -0000 [ 3.299463@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.305667@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.310671@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.316241@2] Initializing XFRM netlink socket [ 3.321223@2] NET: Registered protocol family 10 [ 3.326401@2] mip6: Mobile IPv6 [ 3.328300@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.334068@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.341113@2] NET: Registered protocol family 17 [ 3.344436@2] NET: Registered protocol family 15 [ 3.349001@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.362104@2] Bluetooth: RFCOMM TTY layer initialized [ 3.366992@2] Bluetooth: RFCOMM socket layer initialized [ 3.372271@2] Bluetooth: RFCOMM ver 1.11 [ 3.376124@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.381550@2] Bluetooth: BNEP filters: protocol multicast [ 3.386904@2] Bluetooth: BNEP socket layer initialized [ 3.391986@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.398027@2] Bluetooth: HIDP socket layer initialized [ 3.403192@2] l2tp_core: L2TP core driver, V2.0 [ 3.407621@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.412512@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.418238@2] l2tp_netlink: L2TP netlink interface [ 3.422997@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.429024@2] l2tp_debugfs: L2TP debugfs support [ 3.433557@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.440167@2] NET: Registered protocol family 35 [ 3.444923@2] Key type dns_resolver registered [ 3.450088@2] Registered swp emulation handler [ 3.453576@2] Registered cp15_barrier emulation handler [ 3.458720@2] Registered setend emulation handler [ 3.463377@2] disable EAS feature [ 3.467463@0] registered taskstats version 1 [ 3.480245@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.986443@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.986511@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.994697@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.003120@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.009993@1] hub 1-0:1.0: USB hub found [ 4.013024@1] hub 1-0:1.0: 1 port detected [ 4.017373@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.022628@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.030454@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.039378@3] hub 2-0:1.0: USB hub found [ 4.042503@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.049805@3] usb usb2: Unsupported the hub [ 4.054275@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.062341@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.170782@1] dwc_otg: Core Release: 3.10a [ 4.170828@1] dwc_otg: Setting default values for core params [ 4.174989@1] dwc_otg: curmode: 0, host_only: 0 [ 4.191779@1] dwc_otg: Using Buffer DMA mode [ 4.191801@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.195687@1] dwc_otg: Working on port type = SLAVE [ 4.200520@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.207583@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.216922@0] gxbb_pm: enter meson_pm_probe! [ 4.216961@0] no vddio3v3_en pin[ 4.218596@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.223684@0] gxbb_pm: meson_pm_probe done [ 4.228023 4.234318@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.239726@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.449558@1] ubi0: attaching mtd6 [ 4.977806@1] ubi0: scanning is finished [ 4.982012@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.982302@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.989310@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.996222@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.003264@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.009478@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.016805@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.026037@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.035450@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.041240@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.085841@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.087809@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.097784@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.108560@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.114511@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.300569@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.361679@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.453315@0] ubi1: attaching mtd7 [ 5.779649@0] ubi1: scanning is finished [ 5.783537@1] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.783650@1] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.790651@1] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.797547@1] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.804612@1] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.810740@1] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.818067@1] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.827367@1] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.836684@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.845652@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.869320@2] UBIFS (ubi1:0): recovery needed [ 5.950050@2] UBIFS (ubi1:0): recovery completed [ 5.950207@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.956394@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.966387@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.977078@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.983807@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2f2a450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 7.015799@0] aml_tdm_open [ 7.025439@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.025477@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.032359@0] aml_tdm_open [ 7.033658@0] Not init audio effects Opened TCP tuning i[ 7.039238@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.044584@3] cpufreq_interactive: no need to active hmp boost! nterface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.131690@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.135343@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.141701@0] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.190497@0] asoc-aml-card auge_sound: tdm playback enable [ 8.624897@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22019 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 34 25 0c 3f 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015888 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975360 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016844@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106553@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129129@0] ftrace: allocating 43519 entries in 170 pages [ 0.209455@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210264@0] CPU0: update cpu_capacity 1024 [ 0.214590@0] ASID allocator initialised with 32768 entries [ 0.252565@0] secmon: can't fine clear_range [ 0.253149@0] EFI services will not be available. [ 0.255995@0] Meson chip version = RevC (25:C - 43:0) [ 0.289917@1] Detected VIPT I-cache on CPU1 [ 0.289979@1] CPU1: update cpu_capacity 1024 [ 0.289981@1] CPU1: Booted secondary processor [410fd034] [ 0.317970@2] Detected VIPT I-cache on CPU2 [ 0.318022@2] CPU2: update cpu_capacity 1024 [ 0.318025@2] CPU2: Booted secondary processor [410fd034] [ 0.346044@3] Detected VIPT I-cache on CPU3 [ 0.346094@3] CPU3: update cpu_capacity 1024 [ 0.346096@3] CPU3: Booted secondary processor [410fd034] [ 0.346189@0] Brought up 4 CPUs [ 0.385411@0] SMP: Total of 4 processors activated. [ 0.390321@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396356@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407316@0] CPU: All CPU(s) started at EL2 [ 0.408096@0] alternatives: patching kernel code [ 0.413504@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420634@0] devtmpfs: initialized [ 0.436088@0] DMI not present or invalid. [ 0.436474@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444475@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451035@0] pinctrl core: initialized pinctrl subsystem [ 0.457596@0] NET: Registered protocol family 16 [ 0.484930@2] cpuidle: using governor menu [ 0.485082@2] register canvas platform driver [ 0.487807@2] register rdma platform driver [ 0.493254@2] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499616@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507099@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513183@2] clkmsr: clkmsr: driver init [ 0.516930@2] codec_mm_module_init [ 0.520377@2] media_configs_system_init [ 0.524504@2] aml_watch_point_probe, in, wp:2 [ 0.529158@2] pstore: using zlib compression [ 0.533422@2] console [pstore-1] enabled [ 0.536761@2] pstore: Registered ramoops as persistent store backend [ 0.543167@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557246@0] aml_iomap: amlogic iomap probe done [ 0.561992@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563864@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572838@2] audio_clocks: audio_clocks_probe done [ 0.581563@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581620@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586792@2] amlogic auge_snd_iomap probe done [ 0.869531@2] vgaarb: loaded [ 0.869908@2] SCSI subsystem initialized [ 0.871049@2] usbcore: registered new interface driver usbfs [ 0.876511@2] usbcore: registered new interface driver hub [ 0.882028@2] usbcore: registered new device driver usb [ 0.887322@2] Linux video capture interface: v2.00 [ 0.892058@2] pps_core: LinuxPPS API ver. 1 registered [ 0.897150@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.906531@2] PTP clock support registered [ 0.918850@2] dmi: Firmware registration failed. [ 0.919287@2] secmon: reserve_mem_size:0x300000 [ 0.922444@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.929404@2] secmon: get page:ffffffbf00140000, 5000 [ 0.934127@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.942509@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.949248@2] fb: osd_init_module [ 0.953747@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.959302@2] Bluetooth: Core ver 2.22 [ 0.962432@2] NET: Registered protocol family 31 [ 0.967027@2] Bluetooth: HCI device and connection manager initialized [ 0.973590@2] Bluetooth: HCI socket layer initialized [ 0.978656@2] Bluetooth: L2CAP socket layer initialized [ 0.983949@2] Bluetooth: SCO socket layer initialized [ 0.989516@2] NetLabel: Initializing [ 0.992554@2] NetLabel: domain hash size = 128 [ 0.997195@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.002350@2] NetLabel: unlabeled traffic allowed by default [ 1.009723@0] clocksource: Switched to clocksource arch_sys_counter [ 1.110338@0] VFS: Disk quotas dquot_6.6.0 [ 1.110436@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.129100@0] NET: Registered protocol family 2 [ 1.129847@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.135336@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.141996@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.148585@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.154545@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.161206@0] NET: Registered protocol family 1 [ 1.166055@0] RPC: Registered named UNIX socket transport module. [ 1.171680@0] RPC: Registered udp transport module. [ 1.176561@0] RPC: Registered tcp transport module. [ 1.181460@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.189486@0] Unpacking initramfs... [ 1.291134@0] Freeing initrd memory: 2308K [ 1.292533@0] hw perfevents: clusterb_enabled = 0 [ 1.294485@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.298850@0] hw perfevents: cluster A irq = 7 [ 1.303362@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.312745@0] audit: initializing netlink subsys (disabled) [ 1.316896@0] audit: type=2000 audit(1.160:1): initialized [ 1.323524@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.344482@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.350490@0] NFS: Registering the id_resolver key type [ 1.350553@0] Key type id_resolver registered [ 1.354514@0] Key type id_legacy registered [ 1.359032@0] fuse init (API version 7.26) [ 1.367600@0] NET: Registered protocol family 38 [ 1.367646@0] Key type asymmetric registered [ 1.371755@0] Asymmetric key parser 'x509' registered [ 1.377095@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.384495@0] io scheduler noop registered (default) [ 1.389415@0] io scheduler deadline registered [ 1.394134@0] io scheduler cfq registered [ 1.408815@1] random: fast init done [ 1.408882@1] random: crng init done [ 1.409395@0] Unable to detect cache hierarchy for CPU 0 [ 1.440937@0] loop: module loaded [ 1.445952@0] zram: Added device: zram0 [ 1.446363@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.452118@0] libphy: Fixed MDIO Bus: probed [ 1.455580@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.460356@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.467990@0] PPP generic driver version 2.4.2 [ 1.471499@0] PPP BSD Compression module registered [ 1.476108@0] PPP Deflate Compression module registered [ 1.481356@0] PPP MPPE Compression module registered [ 1.486328@0] NET: Registered protocol family 24 [ 1.491102@0] usbcore: registered new interface driver asix [ 1.496683@0] usbcore: registered new interface driver ax88179_178a [ 1.502949@0] usbcore: registered new interface driver cdc_ether [ 1.508991@0] usbcore: registered new interface driver net1080 [ 1.514846@0] usbcore: registered new interface driver cdc_subset [ 1.520963@0] usbcore: registered new interface driver zaurus [ 1.526755@0] usbcore: registered new interface driver cdc_ncm [ 1.533217@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.539282@0] ehci-pci: EHCI PCI platform driver [ 1.544016@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.550324@0] ohci-pci: OHCI PCI platform driver [ 1.555518@0] usbcore: registered new interface driver cdc_acm [ 1.560808@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.569129@0] usbcore: registered new interface driver usb-storage [ 1.575383@0] usbcore: registered new interface driver usbserial [ 1.581940@2] mousedev: PS/2 mouse device common for all mice [ 1.587432@2] usbcore: registered new interface driver xpad [ 1.592902@1] i2c /dev entries driver [ 1.596527@1] usbcore: registered new interface driver uvcvideo [ 1.602309@1] USB Video Class driver (1.1.1) [ 1.606554@1] md: linear personality registered for level -1 [ 1.612755@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.622437@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.628206@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.635964@1] usbcore: registered new interface driver usbhid [ 1.639905@1] usbhid: USB HID core driver [ 1.644170@2] ashmem: initialized [ 1.647676@1] logger: created 512K log 'log_main' [ 1.652163@2] logger: created 1K log 'log_events' [ 1.656903@1] logger: created 1K log 'log_radio' [ 1.661522@2] logger: created 16K log 'log_system' [ 1.666157@2] exFAT: Version 1.3.0 [ 1.671068@3] ff803000.serial: clock gate not found [ 1.674544@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.681696@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.696661@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.699266@3] console [ttyS0] enabled [ 1.699266@3] console [ttyS0] enabled [ 1.706495@3] bootconsole [aml_uart0] disabled [ 1.706495@3] bootconsole [aml_uart0] disabled [ 1.715962@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.722417@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.732712@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.742507@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.749030@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.761403@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.765509@1] irq = 20 [ 1.767838@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.776641@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.781610@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.786341@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.792748@1] meson-remote: Driver init [ 1.796729@1] meson-remote: remote_probe [ 1.800321@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.805384@1] meson-remote ff808040.rc: don't find the node [ 1.811936@1] meson-remote ff808040.rc: led_blink = 0 [ 1.816944@1] meson-remote ff808040.rc: don't find the node [ 1.823839@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.829486@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.835181@1] meson-remote ff808040.rc: custom_number = 3 [ 1.840506@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.846181@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.853338@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.859638@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.865781@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.871450@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.878608@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.884904@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.891049@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.896720@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.903879@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.910175@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.916304@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.923027@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.928805@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.934583@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.940276@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.945968@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.951920@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.957785@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.963391@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.968738@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.974086@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.980283@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.987180@3] meson-remote: IR XMP protocol handler initialized [ 1.992750@3] efusekeynum: 4 [ 1.995280@3] efusekeyname: mac offset: 0 size: 6 [ 2.001614@3] efusekeyname: mac_bt offset: 6 size: 6 [ 2.007995@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.014385@3] efusekeyname: usid offset: 18 size: 16 [ 2.021035@0] efuse efuse: probe OK! [ 2.026831@3] ge2d: ge2d_init_module [ 2.028324@3] [tsync_pcr_init]init success. [ 2.032891@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.039336@0] DI: di_module_init ok. [ 2.042479@0] dim:dim_module_init [ 2.045692@0] dim:dim_module_init finish [ 2.049409@0] dil:dil_init. [ 2.052411@0] dil:dil_init ok. [ 2.055225@0] vdin_drv_init: major 241 [ 2.059151@0] vdin_drv_init: vdin driver init done [ 2.063636@0] [viuin..]viuin_init_module viuin module init [ 2.069453@0] [viuin..]viuin_probe probe ok. [ 2.073549@0] amlvid:info: amlvideo_init called[ 2.077604@0] amlvid:info: amlvideo_create_instance called [ 2.083027@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.088383@2] amlvideo-000: V4L2 device registered as video10 [ 2.093822@2] amlvid:info: amlvideo_create_instance called [ 2.099248@2] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.104546@3] amlvideo-001: V4L2 device registered as video23 [ 2.110337@3] PPMGRDRV: warn: ppmgr module init func called [ 2.116474@1] videosync_create_instance dev_s ffffffc01d48b000,dev_s->dev ffffffc01d986f80 [ 2.123754@1] videosync_create_instance reg videosync.0 [ 2.129004@1] aml_vecm_init:module init [ 2.129005@0] videosync_thread started [ 2.136734@1] amdolby_vision_init:module init [ 2.141018@1] prime_sl module init [ 2.144631@1] amlogic mtd driver init [ 2.148345@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.153585@1] bl mode descrete [ 2.156510@1] fip_copies 4 [ 2.159179@1] fip_size 0x200000 [ 2.162283@1] nand_clk_ctrl 0xffe07000 [ 2.165991@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.171619@1] nand_clk_ctrl 0xffe07000 [ 2.175320@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.183654@1] plat->aml_nand_device ffffff800a778cf8 [ 2.188184@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.194176@1] NAND device id: c2 dc 90 a2 57 3 [ 2.198346@1] NAND device: Manufacturer ID: [ 2.202391@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.209051@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.214550@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.220071@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.226373@1] mtd->oobavail: 0x10 [ 2.230334@0] aml_nand_init 2119: plat-name:bootloader [ 2.234755@0] Creating 1 MTD partitions on "bootloader": [ 2.240000@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.247846@0] bootloader initialized ok [ 2.249225@0] plat->aml_nand_device ffffff800a778cf8 [ 2.254164@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.260190@0] NAND device id: c2 dc 90 a2 57 3 [ 2.264324@0] NAND device: Manufacturer ID: [ 2.268377@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.275042@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.280535@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.286054@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.292361@0] mtd->oobavail: 0x10 [ 2.295839@0] aml_nand_init 2119: plat-name:nandnormal [ 2.300760@0] bbt_start=20 [ 2.303390@0] env_start=24 [ 2.306062@0] key_start=32 [ 2.308726@0] dtb_start=40 [ 2.311408@0] ddr_start=44 [ 2.314084@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.320563@0] get_free_node 43: bitmap=0 [ 2.324003@0] get_free_node 55: bitmap=1 [ 2.328087@0] get_free_node 43: bitmap=1 [ 2.331764@0] get_free_node 55: bitmap=3 [ 2.335848@0] get_free_node 43: bitmap=3 [ 2.339527@0] get_free_node 55: bitmap=7 [ 2.343408@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.350048@0] nbbt free list: [ 2.352973@0] blockN=21, ec=-1, dirty_flag=0 [ 2.357207@0] blockN=22, ec=-1, dirty_flag=0 [ 2.361433@0] blockN=23, ec=-1, dirty_flag=0 [ 2.365660@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.371069@0] nbbt valid addr: 500000 [ 2.374286@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.379892@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.386133@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.392544@0] get_free_node 43: bitmap=7 [ 2.396020@0] get_free_node 55: bitmap=f [ 2.400104@0] get_free_node 43: bitmap=f [ 2.403783@0] get_free_node 55: bitmap=1f [ 2.407959@0] get_free_node 43: bitmap=1f [ 2.411718@0] get_free_node 55: bitmap=3f [ 2.415888@0] get_free_node 43: bitmap=3f [ 2.419653@0] get_free_node 55: bitmap=7f [ 2.423823@0] get_free_node 43: bitmap=7f [ 2.427588@0] get_free_node 55: bitmap=ff [ 2.431758@0] get_free_node 43: bitmap=ff [ 2.435523@0] get_free_node 55: bitmap=1ff [ 2.439779@0] get_free_node 43: bitmap=1ff [ 2.443629@0] get_free_node 55: bitmap=3ff [ 2.447684@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.454324@0] nenv free list: [ 2.457249@0] blockN=25, ec=-1, dirty_flag=0 [ 2.461483@0] blockN=26, ec=-1, dirty_flag=0 [ 2.465709@0] blockN=27, ec=-1, dirty_flag=0 [ 2.469935@0] blockN=28, ec=-1, dirty_flag=0 [ 2.474161@0] blockN=29, ec=-1, dirty_flag=0 [ 2.478388@0] blockN=30, ec=-1, dirty_flag=0 [ 2.482614@0] blockN=31, ec=-1, dirty_flag=0 [ 2.486840@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.498582@0] nenv valid addr: 610000 [ 2.498602@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.503035@0] get_free_node 43: bitmap=3ff [ 2.506886@0] get_free_node 55: bitmap=7ff [ 2.511142@0] get_free_node 43: bitmap=7ff [ 2.514993@0] get_free_node 55: bitmap=fff [ 2.519249@0] get_free_node 43: bitmap=fff [ 2.523101@0] get_free_node 55: bitmap=1fff [ 2.527443@0] get_free_node 43: bitmap=1fff [ 2.531381@0] get_free_node 55: bitmap=3fff [ 2.535723@0] get_free_node 43: bitmap=3fff [ 2.539661@0] get_free_node 55: bitmap=7fff [ 2.544003@0] get_free_node 43: bitmap=7fff [ 2.547941@0] get_free_node 55: bitmap=ffff [ 2.552283@0] get_free_node 43: bitmap=ffff [ 2.556221@0] get_free_node 55: bitmap=1ffff [ 2.560649@0] get_free_node 43: bitmap=1ffff [ 2.564673@0] get_free_node 55: bitmap=3ffff [ 2.568899@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.575540@0] nkey free list: [ 2.578473@0] blockN=32, ec=-1, dirty_flag=0 [ 2.582698@0] blockN=33, ec=-1, dirty_flag=0 [ 2.586925@0] blockN=34, ec=-1, dirty_flag=0 [ 2.591151@0] blockN=35, ec=-1, dirty_flag=0 [ 2.595377@0] blockN=36, ec=-1, dirty_flag=0 [ 2.599604@0] blockN=37, ec=-1, dirty_flag=0 [ 2.603830@0] blockN=38, ec=-1, dirty_flag=0 [ 2.608056@0] blockN=39, ec=-1, dirty_flag=0 [ 2.612283@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.617371@0] nkey valid addr: fffffffffffc0000 [ 2.621857@0] aml_nand_key_check 1251 NO key exist [ 2.626601@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.633217@0] get_free_node 43: bitmap=3ffff [ 2.637037@0] get_free_node 55: bitmap=7ffff [ 2.641467@0] get_free_node 43: bitmap=7ffff [ 2.645490@0] get_free_node 55: bitmap=fffff [ 2.649937@0] get_free_node 43: bitmap=fffff [ 2.653943@0] get_free_node 55: bitmap=1fffff [ 2.658255@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.664899@0] ndtb free list: [ 2.667828@0] blockN=41, ec=-1, dirty_flag=0 [ 2.672054@0] blockN=42, ec=-1, dirty_flag=0 [ 2.676280@0] blockN=43, ec=-1, dirty_flag=0 [ 2.680507@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.698501@0] ndtb valid addr: a00000 [ 2.698521@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.702954@0] get_free_node 43: bitmap=1fffff [ 2.707064@0] get_free_node 55: bitmap=3fffff [ 2.711604@0] get_free_node 43: bitmap=3fffff [ 2.715688@0] get_free_node 55: bitmap=7fffff [ 2.720001@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.726641@0] nddr free list: [ 2.729566@0] blockN=44, ec=-1, dirty_flag=0 [ 2.733800@0] blockN=45, ec=-1, dirty_flag=0 [ 2.738027@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.743115@0] nddr valid addr: fffffffffffc0000 [ 2.747601@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.752347@0] tpl: off 16777216, size 8388608 [ 2.818605@0] Creating 7 MTD partitions on "nandnormal": [ 2.818635@0] 0x000001000000-0x000001800000 : "tpl" [ 2.826101@1] 0x000001800000-0x000001a00000 : "misc" [ 2.829508@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.834406@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.841391@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.846188@2] 0x000003b00000-0x000015300000 : "system" [ 2.885045@2] 0x000015300000-0x000020000000 : "data" [ 2.908292@2] nandnormal initialized ok [ 2.908375@2] aml_ubootenv_init: register env chardev [ 2.911741@2] aml_ubootenv_init: register env chardev OK [ 2.916962@2] amlnf_dtb_init: register dtb cdev [ 2.921470@2] amlnf_dtb_init: register dtd cdev OK [ 2.926030@2] mtd_nand_probe 267 , err = 0 [ 2.930748@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.936362@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.943167@2] unifykey: storage in base: 0xffffffc005000000 [ 2.948112@2] unifykey: storage out base: 0xffffffc005040000 [ 2.953690@2] unifykey: storage block base: 0xffffffc005080000 [ 2.959473@2] unifykey: probe done! [ 2.963391@2] unifykey: no efuse-version set, use default value: -1 [ 2.969146@2] unifykey: key unify config unifykey-num is 6 [ 2.974604@2] unifykey: key unify fact unifykey-num is 6 [ 2.979827@2] unifykey: unifykey_devno: ee00000 [ 2.984576@2] unifykey: device unifykeys created ok [ 2.989221@2] unifykey: aml_unifykeys_init done! [ 2.994005@2] audio_dsp: [dsp]register dsp to char divece(257) [ 3.000350@2] amlkaraoke init success! [ 3.003524@2] sysled: module init [ 3.006874@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.011838@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.018971@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.025494@2] amlogic rfkill init [ 3.030156@2] dmc_monitor_probe [ 3.031882@2] page_trace_module_init, create sysfs failed [ 3.041576@2] defendkey defendkey: Reserved memory is not enough! [ 3.043076@2] defendkey: probe of defendkey failed with error -22 [ 3.050089@2] usbcore: registered new interface driver snd-usb-audio [ 3.059350@2] asoc debug: aml_audio_controller_probe-130 [ 3.061113@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.066476@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.074264@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.081432@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.087813@2] aml_tdm_platform_probe(), share en = 1[ 3.092551@2] No channel mask node Channel_Mask [ 3.097382@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.102863@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.110820@2] aml_tdm_platform_probe(), share en = 1[ 3.115323@2] No channel mask node Channel_Mask [ 3.120080@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.125642@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.133569@2] aml_tdm_platform_probe(), share en = 1[ 3.138092@2] No channel mask node Channel_Mask [ 3.143690@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.150749@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.158842@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.168724@2] Register vad [ 3.169914@2] check whether to update sound card init data [ 3.175708@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.182706@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.190015@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.195629@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.203297@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.210629@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.216501@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.222988@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.230157@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.236030@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.242935@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.248740@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.255485@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.263191@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.270248@2] snd_card_add_kcontrols card:ffffffc01c9dd018 [ 3.275394@2] effect_v2 is not init [ 3.278768@2] Failed to add VAD controls [ 3.282992@2] GACT probability NOT on [ 3.286297@2] Mirror/redirect action on [ 3.290076@2] u32 classifier [ 3.292899@2] Actions configured [ 3.296449@2] Netfilter messages via NETLINK v0.30. [ 3.301524@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.307742@2] ctnetlink v0.93: registering with nfnetlink. [ 3.313459@0] xt_time: kernel timezone is -0000 [ 3.317435@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.323621@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.328648@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.334210@0] Initializing XFRM netlink socket [ 3.339186@0] NET: Registered protocol family 10 [ 3.344346@0] mip6: Mobile IPv6 [ 3.346263@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.352041@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.359098@0] NET: Registered protocol family 17 [ 3.362402@0] NET: Registered protocol family 15 [ 3.366962@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.380062@0] Bluetooth: RFCOMM TTY layer initialized [ 3.384956@0] Bluetooth: RFCOMM socket layer initialized [ 3.390235@0] Bluetooth: RFCOMM ver 1.11 [ 3.394090@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.399517@0] Bluetooth: BNEP filters: protocol multicast [ 3.404868@0] Bluetooth: BNEP socket layer initialized [ 3.409953@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.415993@0] Bluetooth: HIDP socket layer initialized [ 3.421154@0] l2tp_core: L2TP core driver, V2.0 [ 3.425577@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.430477@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.436205@0] l2tp_netlink: L2TP netlink interface [ 3.440972@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.446982@0] l2tp_debugfs: L2TP debugfs support [ 3.451523@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.458131@0] NET: Registered protocol family 35 [ 3.462887@0] Key type dns_resolver registered [ 3.468052@0] Registered swp emulation handler [ 3.471473@0] Registered cp15_barrier emulation handler [ 3.476630@0] Registered setend emulation handler [ 3.481342@0] disable EAS feature [ 3.485446@2] registered taskstats version 1 [ 3.498255@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.004452@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.004511@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.012649@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.021125@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.027976@2] hub 1-0:1.0: USB hub found [ 4.031027@2] hub 1-0:1.0: 1 port detected [ 4.035393@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.040637@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.048453@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.057359@0] hub 2-0:1.0: USB hub found [ 4.060531@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.067806@0] usb usb2: Unsupported the hub [ 4.072257@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.080358@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.188921@0] dwc_otg: Core Release: 3.10a [ 4.188954@0] dwc_otg: Setting default values for core params [ 4.193117@0] dwc_otg: curmode: 0, host_only: 0 [ 4.209922@0] dwc_otg: Using Buffer DMA mode [ 4.209944@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.213825@0] dwc_otg: Working on port type = SLAVE [ 4.218659@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.225661@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.235267@0] gxbb_pm: enter meson_pm_probe! [ 4.235306@0] no vddio3v3_en pin[ 4.236949@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.242019@0] gxbb_pm: meson_pm_probe done [ 4.24637S 4.252650@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.258076@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.467802@0] ubi0: attaching mtd6 [ 4.996303@0] ubi0: scanning is finished [ 5.000424@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 5.000708@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.007717@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.014644@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.021670@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.027883@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.035211@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.044443@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.053854@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.059763@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.104729@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.106706@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.116670@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.127447@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.133399@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.319158@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.379710@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.464559@3] ubi1: attaching mtd7 [ 5.790999@3] ubi1: scanning is finished [ 5.794777@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.795001@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.802011@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.808896@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.815963@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.822090@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.829418@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.838650@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.848027@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.857259@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.880948@2] UBIFS (ubi1:0): recovery needed [ 5.962410@0] UBIFS (ubi1:0): recovery completed [ 5.962563@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.968744@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.978800@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.989441@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.996168@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2a28450 --- 0 OK [ 7.028221@3] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 7.039911@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.039949@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.047100@3] aml_tdm_open [ 7.048130@3] Not init audio effects Opened TCP tuning interface on port 15002: Waiting [ 7.057080@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.061791@1] cpufreq_interactive: no need to active hmp boost! for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.146727@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.150384@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.157194@3] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.205464@3] asoc-aml-card auge_sound: tdm playback enable [ 8.609960@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.322715@3] asoc-aml-card auge_sound: tdm playback stop [ 13.323035@2] asoc-aml-card auge_sound: tdm capture stop [ 13.327851@2] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.320630@3] mtd_nand_reboot_notifier 35 [ 15.320895@3] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.328953@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.332557@3] usb usb2: USB disconnect, device number 1 [ 15.342451@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.343266@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.348676@1] usb usb1: USB disconnect, device number 1 [ 15.360127@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.385969@0] reboot: Restarting system [ 15.386474@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22023 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975674 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016833@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129128@0] ftrace: allocating 43519 entries in 170 pages [ 0.209541@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210352@0] CPU0: update cpu_capacity 1024 [ 0.214677@0] ASID allocator initialised with 32768 entries [ 0.252660@0] secmon: can't fine clear_range [ 0.253238@0] EFI services will not be available. [ 0.256098@0] Meson chip version = RevC (25:C - 43:0) [ 0.290028@1] Detected VIPT I-cache on CPU1 [ 0.290089@1] CPU1: update cpu_capacity 1024 [ 0.290091@1] CPU1: Booted secondary processor [410fd034] [ 0.318075@2] Detected VIPT I-cache on CPU2 [ 0.318125@2] CPU2: update cpu_capacity 1024 [ 0.318128@2] CPU2: Booted secondary processor [410fd034] [ 0.346142@3] Detected VIPT I-cache on CPU3 [ 0.346191@3] CPU3: update cpu_capacity 1024 [ 0.346193@3] CPU3: Booted secondary processor [410fd034] [ 0.346286@0] Brought up 4 CPUs [ 0.385507@0] SMP: Total of 4 processors activated. [ 0.390417@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407419@0] CPU: All CPU(s) started at EL2 [ 0.408192@0] alternatives: patching kernel code [ 0.413596@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420734@0] devtmpfs: initialized [ 0.436188@0] DMI not present or invalid. [ 0.436584@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444570@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451137@0] pinctrl core: initialized pinctrl subsystem [ 0.457716@0] NET: Registered protocol family 16 [ 0.481067@0] cpuidle: using governor menu [ 0.481212@0] register canvas platform driver [ 0.483941@0] register rdma platform driver [ 0.489381@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495758@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503244@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509373@0] clkmsr: clkmsr: driver init [ 0.513066@0] codec_mm_module_init [ 0.516504@0] media_configs_system_init [ 0.520629@0] aml_watch_point_probe, in, wp:2 [ 0.526164@0] pstore: using zlib compression [ 0.529566@0] console [pstore-1] enabled [ 0.532894@0] pstore: Registered ramoops as persistent store backend [ 0.539308@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553330@0] aml_iomap: amlogic iomap probe done [ 0.557970@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559926@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568879@0] audio_clocks: audio_clocks_probe done [ 0.577575@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577631@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582809@0] amlogic auge_snd_iomap probe done [ 0.866610@2] vgaarb: loaded [ 0.867009@2] SCSI subsystem initialized [ 0.868116@2] usbcore: registered new interface driver usbfs [ 0.873628@2] usbcore: registered new interface driver hub [ 0.879127@2] usbcore: registered new device driver usb [ 0.884448@2] Linux video capture interface: v2.00 [ 0.889147@2] pps_core: LinuxPPS API ver. 1 registered [ 0.894226@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.903616@2] PTP clock support registered [ 0.908099@2] dmi: Firmware registration failed. [ 0.916642@2] secmon: reserve_mem_size:0x300000 [ 0.916931@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.923902@2] secmon: get page:ffffffbf00140000, 5000 [ 0.928609@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.937003@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.943729@2] fb: osd_init_module [ 0.948240@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.953797@2] Bluetooth: Core ver 2.22 [ 0.956915@2] NET: Registered protocol family 31 [ 0.961519@2] Bluetooth: HCI device and connection manager initialized [ 0.968075@2] Bluetooth: HCI socket layer initialized [ 0.973144@2] Bluetooth: L2CAP socket layer initialized [ 0.978432@2] Bluetooth: SCO socket layer initialized [ 0.984002@2] NetLabel: Initializing [ 0.987040@2] NetLabel: domain hash size = 128 [ 0.991679@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996844@2] NetLabel: unlabeled traffic allowed by default [ 1.004199@2] clocksource: Switched to clocksource arch_sys_counter [ 1.104843@2] VFS: Disk quotas dquot_6.6.0 [ 1.104942@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.123701@3] NET: Registered protocol family 2 [ 1.124488@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.129919@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.136628@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.143168@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.149220@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.155814@2] NET: Registered protocol family 1 [ 1.160651@2] RPC: Registered named UNIX socket transport module. [ 1.166292@2] RPC: Registered udp transport module. [ 1.171161@2] RPC: Registered tcp transport module. [ 1.176062@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.184116@2] Unpacking initramfs... [ 1.285784@2] Freeing initrd memory: 2308K [ 1.287211@2] hw perfevents: clusterb_enabled = 0 [ 1.289043@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.293559@2] hw perfevents: cluster A irq = 7 [ 1.298037@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.307365@2] audit: initializing netlink subsys (disabled) [ 1.311539@2] audit: type=2000 audit(1.120:1): initialized [ 1.318141@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.339100@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.345117@2] NFS: Registering the id_resolver key type [ 1.345178@2] Key type id_resolver registered [ 1.349132@2] Key type id_legacy registered [ 1.353625@2] fuse init (API version 7.26) [ 1.362170@2] NET: Registered protocol family 38 [ 1.362224@2] Key type asymmetric registered [ 1.366366@2] Asymmetric key parser 'x509' registered [ 1.371701@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.379067@2] io scheduler noop registered (default) [ 1.384056@2] io scheduler deadline registered [ 1.388735@2] io scheduler cfq registered [ 1.403474@3] random: fast init done [ 1.403541@3] random: crng init done [ 1.404060@2] Unable to detect cache hierarchy for CPU 0 [ 1.436316@2] loop: module loaded [ 1.441303@2] zram: Added device: zram0 [ 1.441695@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.446922@2] libphy: Fixed MDIO Bus: probed [ 1.451784@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.455723@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.463424@2] PPP generic driver version 2.4.2 [ 1.466824@2] PPP BSD Compression module registered [ 1.471458@2] PPP Deflate Compression module registered [ 1.476710@2] PPP MPPE Compression module registered [ 1.481679@2] NET: Registered protocol family 24 [ 1.486454@2] usbcore: registered new interface driver asix [ 1.492044@2] usbcore: registered new interface driver ax88179_178a [ 1.498306@2] usbcore: registered new interface driver cdc_ether [ 1.504334@2] usbcore: registered new interface driver net1080 [ 1.510197@2] usbcore: registered new interface driver cdc_subset [ 1.516319@2] usbcore: registered new interface driver zaurus [ 1.522129@2] usbcore: registered new interface driver cdc_ncm [ 1.528568@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.534631@2] ehci-pci: EHCI PCI platform driver [ 1.539370@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.545682@2] ohci-pci: OHCI PCI platform driver [ 1.550852@2] usbcore: registered new interface driver cdc_acm [ 1.556157@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.564478@2] usbcore: registered new interface driver usb-storage [ 1.570738@2] usbcore: registered new interface driver usbserial [ 1.577183@2] mousedev: PS/2 mouse device common for all mice [ 1.582792@2] usbcore: registered new interface driver xpad [ 1.588283@2] i2c /dev entries driver [ 1.591820@2] usbcore: registered new interface driver uvcvideo [ 1.597632@2] USB Video Class driver (1.1.1) [ 1.601908@2] md: linear personality registered for level -1 [ 1.608096@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.617728@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.623575@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.631339@2] usbcore: registered new interface driver usbhid [ 1.635260@2] usbhid: USB HID core driver [ 1.639521@0] ashmem: initialized [ 1.643009@2] logger: created 512K log 'log_main' [ 1.647500@0] logger: created 1K log 'log_events' [ 1.652297@2] logger: created 1K log 'log_radio' [ 1.656869@2] logger: created 16K log 'log_system' [ 1.661505@2] exFAT: Version 1.3.0 [ 1.666212@2] ff803000.serial: clock gate not found [ 1.669875@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.677049@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.692015@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.694602@2] console [ttyS0] enabled [ 1.694602@2] console [ttyS0] enabled [ 1.701811@2] bootconsole [aml_uart0] disabled [ 1.701811@2] bootconsole [aml_uart0] disabled [ 1.711303@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.717765@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.728095@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.737880@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.744375@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.756827@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.760851@2] irq = 20 [ 1.763180@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.771983@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.776490@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.781605@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.788103@2] meson-remote: Driver init [ 1.792067@2] meson-remote: remote_probe [ 1.795670@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.800739@2] meson-remote ff808040.rc: don't find the node [ 1.807296@2] meson-remote ff808040.rc: led_blink = 0 [ 1.812294@2] meson-remote ff808040.rc: don't find the node [ 1.819197@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.824834@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.830538@2] meson-remote ff808040.rc: custom_number = 3 [ 1.835853@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.841535@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.848692@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.854988@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.861136@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.866804@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.873962@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.880258@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.886403@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.892075@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.899233@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.905529@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.911656@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.918380@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.924159@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.929937@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.935629@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.941322@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.947273@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.953139@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.958744@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.964092@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.969440@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.975509@2] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.982436@3] meson-remote: IR XMP protocol handler initialized [ 1.988099@3] efusekeynum: 4 [ 1.990621@3] efusekeyname: mac offset: 0 size: 6 [ 1.996975@3] efusekeyname: mac_bt offset: 6 size: 6 [ 2.003347@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.009732@3] efusekeyname: usid offset: 18 size: 16 [ 2.016403@0] efuse efuse: probe OK! [ 2.022305@3] ge2d: ge2d_init_module [ 2.023675@3] [tsync_pcr_init]init success. [ 2.028498@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.034717@3] DI: di_module_init ok. [ 2.037826@3] dim:dim_module_init [ 2.041089@3] dim:dim_module_init finish [ 2.044757@3] dil:dil_init. [ 2.047696@3] dil:dil_init ok. [ 2.050576@3] vdin_drv_init: major 241 [ 2.054509@3] vdin_drv_init: vdin driver init done [ 2.058986@3] [viuin..]viuin_init_module viuin module init [ 2.064800@3] [viuin..]viuin_probe probe ok. [ 2.068895@3] amlvid:info: amlvideo_init called[ 2.072959@3] amlvid:info: amlvideo_create_instance called [ 2.078376@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.083773@0] amlvideo-000: V4L2 device registered as video10 [ 2.089189@0] amlvid:info: amlvideo_create_instance called [ 2.094601@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.099910@1] amlvideo-001: V4L2 device registered as video23 [ 2.105680@1] PPMGRDRV: warn: ppmgr module init func called [ 2.111836@1] videosync_create_instance dev_s ffffffc01d4b1800,dev_s->dev ffffffc01dae4f00 [ 2.119122@1] videosync_create_instance reg videosync.0 [ 2.124367@1] aml_vecm_init:module init [ 2.124368@3] videosync_thread started [ 2.132090@1] amdolby_vision_init:module init [ 2.136378@1] prime_sl module init [ 2.139963@1] amlogic mtd driver init [ 2.143711@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.148953@1] bl mode descrete [ 2.151851@1] fip_copies 4 [ 2.154537@1] fip_size 0x200000 [ 2.157645@1] nand_clk_ctrl 0xffe07000 [ 2.161346@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.166976@1] nand_clk_ctrl 0xffe07000 [ 2.170676@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.179004@1] plat->aml_nand_device ffffff800a778cf8 [ 2.183539@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.189507@1] NAND device id: c2 dc 90 a2 57 3 [ 2.193696@1] NAND device: Manufacturer ID: [ 2.197745@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.204406@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.209905@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.215425@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.221728@1] mtd->oobavail: 0x10 [ 2.225344@2] aml_nand_init 2119: plat-name:bootloader [ 2.230109@2] Creating 1 MTD partitions on "bootloader": [ 2.235354@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.243078@3] bootloader initialized ok [ 2.244610@3] plat->aml_nand_device ffffff800a778cf8 [ 2.249498@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.255540@3] NAND device id: c2 dc 90 a2 57 3 [ 2.259678@3] NAND device: Manufacturer ID: [ 2.263731@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.270392@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.275885@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.281413@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.287712@3] mtd->oobavail: 0x10 [ 2.291198@3] aml_nand_init 2119: plat-name:nandnormal [ 2.296093@3] bbt_start=20 [ 2.298754@3] env_start=24 [ 2.301414@3] key_start=32 [ 2.304080@3] dtb_start=40 [ 2.306762@3] ddr_start=44 [ 2.309438@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.315915@3] get_free_node 43: bitmap=0 [ 2.319356@3] get_free_node 55: bitmap=1 [ 2.323439@3] get_free_node 43: bitmap=1 [ 2.327118@3] get_free_node 55: bitmap=3 [ 2.331202@3] get_free_node 43: bitmap=3 [ 2.334880@3] get_free_node 55: bitmap=7 [ 2.338762@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.345402@3] nbbt free list: [ 2.348334@3] blockN=21, ec=-1, dirty_flag=0 [ 2.352560@3] blockN=22, ec=-1, dirty_flag=0 [ 2.356787@3] blockN=23, ec=-1, dirty_flag=0 [ 2.361014@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.366421@3] nbbt valid addr: 500000 [ 2.369640@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.375246@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.381487@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.387897@3] get_free_node 43: bitmap=7 [ 2.391374@3] get_free_node 55: bitmap=f [ 2.395458@3] get_free_node 43: bitmap=f [ 2.399137@3] get_free_node 55: bitmap=1f [ 2.403306@3] get_free_node 43: bitmap=1f [ 2.407071@3] get_free_node 55: bitmap=3f [ 2.411241@3] get_free_node 43: bitmap=3f [ 2.415007@3] get_free_node 55: bitmap=7f [ 2.419176@3] get_free_node 43: bitmap=7f [ 2.422941@3] get_free_node 55: bitmap=ff [ 2.427111@3] get_free_node 43: bitmap=ff [ 2.430875@3] get_free_node 55: bitmap=1ff [ 2.435133@3] get_free_node 43: bitmap=1ff [ 2.438989@3] get_free_node 55: bitmap=3ff [ 2.443038@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.449678@3] nenv free list: [ 2.452610@3] blockN=25, ec=-1, dirty_flag=0 [ 2.456837@3] blockN=26, ec=-1, dirty_flag=0 [ 2.461063@3] blockN=27, ec=-1, dirty_flag=0 [ 2.465289@3] blockN=28, ec=-1, dirty_flag=0 [ 2.469516@3] blockN=29, ec=-1, dirty_flag=0 [ 2.473742@3] blockN=30, ec=-1, dirty_flag=0 [ 2.477968@3] blockN=31, ec=-1, dirty_flag=0 [ 2.482194@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.493939@3] nenv valid addr: 610000 [ 2.493959@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.498390@3] get_free_node 43: bitmap=3ff [ 2.502240@3] get_free_node 55: bitmap=7ff [ 2.506497@3] get_free_node 43: bitmap=7ff [ 2.510347@3] get_free_node 55: bitmap=fff [ 2.514604@3] get_free_node 43: bitmap=fff [ 2.518455@3] get_free_node 55: bitmap=1fff [ 2.522797@3] get_free_node 43: bitmap=1fff [ 2.526735@3] get_free_node 55: bitmap=3fff [ 2.531078@3] get_free_node 43: bitmap=3fff [ 2.535015@3] get_free_node 55: bitmap=7fff [ 2.539357@3] get_free_node 43: bitmap=7fff [ 2.543295@3] get_free_node 55: bitmap=ffff [ 2.547638@3] get_free_node 43: bitmap=ffff [ 2.551575@3] get_free_node 55: bitmap=1ffff [ 2.556004@3] get_free_node 43: bitmap=1ffff [ 2.560027@3] get_free_node 55: bitmap=3ffff [ 2.564254@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.570893@3] nkey free list: [ 2.573826@3] blockN=32, ec=-1, dirty_flag=0 [ 2.578053@3] blockN=33, ec=-1, dirty_flag=0 [ 2.582279@3] blockN=34, ec=-1, dirty_flag=0 [ 2.586505@3] blockN=35, ec=-1, dirty_flag=0 [ 2.590730@3] blockN=36, ec=-1, dirty_flag=0 [ 2.594957@3] blockN=37, ec=-1, dirty_flag=0 [ 2.599184@3] blockN=38, ec=-1, dirty_flag=0 [ 2.603410@3] blockN=39, ec=-1, dirty_flag=0 [ 2.607636@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.612725@3] nkey valid addr: fffffffffffc0000 [ 2.617210@3] aml_nand_key_check 1251 NO key exist [ 2.621955@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.628577@3] get_free_node 43: bitmap=3ffff [ 2.632391@3] get_free_node 55: bitmap=7ffff [ 2.636820@3] get_free_node 43: bitmap=7ffff [ 2.640845@3] get_free_node 55: bitmap=fffff [ 2.645272@3] get_free_node 43: bitmap=fffff [ 2.649296@3] get_free_node 55: bitmap=1fffff [ 2.653619@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.660249@3] ndtb free list: [ 2.663173@3] blockN=41, ec=-1, dirty_flag=0 [ 2.667408@3] blockN=42, ec=-1, dirty_flag=0 [ 2.671634@3] blockN=43, ec=-1, dirty_flag=0 [ 2.675860@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.693858@3] ndtb valid addr: a00000 [ 2.693877@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.698308@3] get_free_node 43: bitmap=1fffff [ 2.702417@3] get_free_node 55: bitmap=3fffff [ 2.706933@3] get_free_node 43: bitmap=3fffff [ 2.711042@3] get_free_node 55: bitmap=7fffff [ 2.715355@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.721995@3] nddr free list: [ 2.724927@3] blockN=44, ec=-1, dirty_flag=0 [ 2.729154@3] blockN=45, ec=-1, dirty_flag=0 [ 2.733380@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.738469@3] nddr valid addr: fffffffffffc0000 [ 2.742954@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.747705@3] tpl: off 16777216, size 8388608 [ 2.813968@3] Creating 7 MTD partitions on "nandnormal": [ 2.814013@3] 0x000001000000-0x000001800000 : "tpl" [ 2.821247@3] 0x000001800000-0x000001a00000 : "misc" [ 2.824947@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.829832@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.836795@1] 0x000002c00000-0x000003b00000 : "boot" [ 2.841535@1] 0x000003b00000-0x000015300000 : "system" [ 2.880501@1] 0x000015300000-0x000020000000 : "data" [ 2.903716@1] nandnormal initialized ok [ 2.903800@1] aml_ubootenv_init: register env chardev [ 2.907159@1] aml_ubootenv_init: register env chardev OK [ 2.912385@1] amlnf_dtb_init: register dtb cdev [ 2.916885@1] amlnf_dtb_init: register dtd cdev OK [ 2.921447@1] mtd_nand_probe 267 , err = 0 [ 2.926167@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.931777@1] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.938597@1] unifykey: storage in base: 0xffffffc005000000 [ 2.943530@1] unifykey: storage out base: 0xffffffc005040000 [ 2.949113@1] unifykey: storage block base: 0xffffffc005080000 [ 2.954890@1] unifykey: probe done! [ 2.958801@1] unifykey: no efuse-version set, use default value: -1 [ 2.964572@1] unifykey: key unify config unifykey-num is 6 [ 2.970030@1] unifykey: key unify fact unifykey-num is 6 [ 2.975247@1] unifykey: unifykey_devno: ee00000 [ 2.980000@1] unifykey: device unifykeys created ok [ 2.984647@1] unifykey: aml_unifykeys_init done! [ 2.989432@1] audio_dsp: [dsp]register dsp to char divece(257) [ 2.995788@1] amlkaraoke init success! [ 2.998914@1] sysled: module init [ 3.002303@1] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.007303@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.014444@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.020933@2] amlogic rfkill init [ 3.025583@3] dmc_monitor_probe [ 3.027302@3] page_trace_module_init, create sysfs failed [ 3.032968@3] defendkey defendkey: Reserved memory is not enough! [ 3.038518@3] defendkey: probe of defendkey failed with error -22 [ 3.045495@3] usbcore: registered new interface driver snd-usb-audio [ 3.054728@3] asoc debug: aml_audio_controller_probe-130 [ 3.056635@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.061897@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.069689@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.076861@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.083236@3] aml_tdm_platform_probe(), share en = 1[ 3.087975@3] No channel mask node Channel_Mask [ 3.092746@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.098284@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.106252@3] aml_tdm_platform_probe(), share en = 1[ 3.110748@3] No channel mask node Channel_Mask [ 3.115473@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.121060@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.129004@3] aml_tdm_platform_probe(), share en = 1[ 3.133516@3] No channel mask node Channel_Mask [ 3.139102@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.146169@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.154257@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.164321@3] Register vad [ 3.165336@3] check whether to update sound card init data [ 3.171144@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.178126@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.185436@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.191047@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.198720@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.206054@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.211924@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.218411@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.225525@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.231477@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.238362@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.244193@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.250954@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.258993@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.265714@3] snd_card_add_kcontrols card:ffffffc01c971818 [ 3.270769@3] effect_v2 is not init [ 3.274198@3] Failed to add VAD controls [ 3.278454@3] GACT probability NOT on [ 3.281728@3] Mirror/redirect action on [ 3.285493@3] u32 classifier [ 3.288331@3] Actions configured [ 3.291864@3] Netfilter messages via NETLINK v0.30. [ 3.296963@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.303144@3] ctnetlink v0.93: registering with nfnetlink. [ 3.308896@1] xt_time: kernel timezone is -0000 [ 3.312858@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.319045@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.324041@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.329629@1] Initializing XFRM netlink socket [ 3.334623@1] NET: Registered protocol family 10 [ 3.339780@1] mip6: Mobile IPv6 [ 3.341689@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.347483@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.354483@1] NET: Registered protocol family 17 [ 3.357826@1] NET: Registered protocol family 15 [ 3.362385@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.375482@1] Bluetooth: RFCOMM TTY layer initialized [ 3.380376@1] Bluetooth: RFCOMM socket layer initialized [ 3.385659@1] Bluetooth: RFCOMM ver 1.11 [ 3.389513@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.394939@1] Bluetooth: BNEP filters: protocol multicast [ 3.400290@1] Bluetooth: BNEP socket layer initialized [ 3.405376@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.411415@1] Bluetooth: HIDP socket layer initialized [ 3.416615@1] l2tp_core: L2TP core driver, V2.0 [ 3.421008@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.425902@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.431627@1] l2tp_netlink: L2TP netlink interface [ 3.436393@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.442412@1] l2tp_debugfs: L2TP debugfs support [ 3.446946@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.453550@1] NET: Registered protocol family 35 [ 3.458322@1] Key type dns_resolver registered [ 3.463476@1] Registered swp emulation handler [ 3.466897@1] Registered cp15_barrier emulation handler [ 3.472054@1] Registered setend emulation handler [ 3.476766@1] disable EAS feature [ 3.480961@3] registered taskstats version 1 [ 3.493681@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.999858@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.999915@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.008044@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.016541@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.023377@1] hub 1-0:1.0: USB hub found [ 4.026473@1] hub 1-0:1.0: 1 port detected [ 4.030790@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.036041@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.043866@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.052776@0] hub 2-0:1.0: USB hub found [ 4.055893@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.063269@0] usb usb2: Unsupported the hub [ 4.067660@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.075773@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.184311@2] dwc_otg: Core Release: 3.10a [ 4.184354@2] dwc_otg: Setting default values for core params [ 4.188506@2] dwc_otg: curmode: 0, host_only: 0 [ 4.205301@2] dwc_otg: Using Buffer DMA mode [ 4.205324@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.209205@2] dwc_otg: Working on port type = SLAVE [ 4.214037@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.221213@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.230237@0] gxbb_pm: enter meson_pm_probe! [ 4.230277@0] no vddio3v3_en pin[ 4.231915@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.236985@0] gxbb_pm: meson_pm_probe done [ 4.241339 4.247636@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.253067@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.461824@3] ubi0: attaching mtd6 [ 4.990435@3] ubi0: scanning is finished [ 4.994640@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.994932@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.001941@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.008828@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.015893@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.022107@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.029435@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.038667@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.048075@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.054017@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.098839@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.100812@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.110781@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.121559@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.127511@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.321643@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.382567@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.466270@3] ubi1: attaching mtd7 [ 5.792740@3] ubi1: scanning is finished [ 5.796617@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.796740@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.803743@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.810634@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.817700@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.823827@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.831155@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.840387@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.849709@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.858886@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.882682@2] UBIFS (ubi1:0): recovery needed [ 5.965918@2] UBIFS (ubi1:0): recovery completed [ 5.966080@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.972250@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.982250@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.992943@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.999672@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bde450 --- 0 [ 7.023589@3] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.033105@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.036678@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.043352@3] aml_tdm_open [ 7.044968@3] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.059718@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.061890@0] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.142916@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.146591@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.152908@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.201757@1] asoc-aml-card auge_sound: tdm playback enable [ 8.648394@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22017 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015882 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975125 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016841@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031587@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074993@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129134@0] ftrace: allocating 43519 entries in 170 pages [ 0.209498@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210308@0] CPU0: update cpu_capacity 1024 [ 0.214634@0] ASID allocator initialised with 32768 entries [ 0.252609@0] secmon: can't fine clear_range [ 0.253187@0] EFI services will not be available. [ 0.256043@0] Meson chip version = RevC (25:C - 43:0) [ 0.289966@1] Detected VIPT I-cache on CPU1 [ 0.290028@1] CPU1: update cpu_capacity 1024 [ 0.290031@1] CPU1: Booted secondary processor [410fd034] [ 0.318022@2] Detected VIPT I-cache on CPU2 [ 0.318074@2] CPU2: update cpu_capacity 1024 [ 0.318076@2] CPU2: Booted secondary processor [410fd034] [ 0.346090@3] Detected VIPT I-cache on CPU3 [ 0.346139@3] CPU3: update cpu_capacity 1024 [ 0.346141@3] CPU3: Booted secondary processor [410fd034] [ 0.346232@0] Brought up 4 CPUs [ 0.385456@0] SMP: Total of 4 processors activated. [ 0.390366@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396401@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407360@0] CPU: All CPU(s) started at EL2 [ 0.408141@0] alternatives: patching kernel code [ 0.413544@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420680@0] devtmpfs: initialized [ 0.436126@0] DMI not present or invalid. [ 0.436513@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444512@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451071@0] pinctrl core: initialized pinctrl subsystem [ 0.457598@0] NET: Registered protocol family 16 [ 0.477001@0] cpuidle: using governor menu [ 0.477144@0] register canvas platform driver [ 0.479876@0] register rdma platform driver [ 0.485319@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491687@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499202@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505240@3] clkmsr: clkmsr: driver init [ 0.508963@3] codec_mm_module_init [ 0.512460@3] media_configs_system_init [ 0.516600@3] aml_watch_point_probe, in, wp:2 [ 0.521235@3] pstore: using zlib compression [ 0.525506@3] console [pstore-1] enabled [ 0.528826@3] pstore: Registered ramoops as persistent store backend [ 0.535226@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549268@3] aml_iomap: amlogic iomap probe done [ 0.553929@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555868@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564865@3] audio_clocks: audio_clocks_probe done [ 0.573543@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573598@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578761@3] amlogic auge_snd_iomap probe done [ 0.853252@0] vgaarb: loaded [ 0.853628@0] SCSI subsystem initialized [ 0.854794@0] usbcore: registered new interface driver usbfs [ 0.860245@0] usbcore: registered new interface driver hub [ 0.865764@0] usbcore: registered new device driver usb [ 0.871042@0] Linux video capture interface: v2.00 [ 0.875787@0] pps_core: LinuxPPS API ver. 1 registered [ 0.880869@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.890264@0] PTP clock support registered [ 0.898614@0] dmi: Firmware registration failed. [ 0.902648@0] secmon: reserve_mem_size:0x300000 [ 0.903569@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.910506@0] secmon: get page:ffffffbf00140000, 5000 [ 0.915251@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.923649@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.930372@0] fb: osd_init_module [ 0.934868@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.940427@0] Bluetooth: Core ver 2.22 [ 0.943562@0] NET: Registered protocol family 31 [ 0.948162@0] Bluetooth: HCI device and connection manager initialized [ 0.954715@0] Bluetooth: HCI socket layer initialized [ 0.959780@0] Bluetooth: L2CAP socket layer initialized [ 0.965105@0] Bluetooth: SCO socket layer initialized [ 0.970659@0] NetLabel: Initializing [ 0.973681@0] NetLabel: domain hash size = 128 [ 0.978326@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.983478@0] NetLabel: unlabeled traffic allowed by default [ 0.990907@1] clocksource: Switched to clocksource arch_sys_counter [ 1.091394@1] VFS: Disk quotas dquot_6.6.0 [ 1.091502@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.110407@1] NET: Registered protocol family 2 [ 1.111200@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.116646@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.123299@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.129893@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.135845@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.142499@1] NET: Registered protocol family 1 [ 1.147332@1] RPC: Registered named UNIX socket transport module. [ 1.152983@1] RPC: Registered udp transport module. [ 1.157862@1] RPC: Registered tcp transport module. [ 1.162765@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.170834@1] Unpacking initramfs... [ 1.272420@1] Freeing initrd memory: 2308K [ 1.273852@1] hw perfevents: clusterb_enabled = 0 [ 1.275772@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.280132@1] hw perfevents: cluster A irq = 7 [ 1.284639@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.294001@1] audit: initializing netlink subsys (disabled) [ 1.298178@1] audit: type=2000 audit(1.088:1): initialized [ 1.304844@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.325757@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.331804@1] NFS: Registering the id_resolver key type [ 1.331869@1] Key type id_resolver registered [ 1.335799@1] Key type id_legacy registered [ 1.340290@1] fuse init (API version 7.26) [ 1.348807@1] NET: Registered protocol family 38 [ 1.348851@1] Key type asymmetric registered [ 1.353038@1] Asymmetric key parser 'x509' registered [ 1.358386@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.365727@1] io scheduler noop registered (default) [ 1.370699@1] io scheduler deadline registered [ 1.375446@1] io scheduler cfq registered [ 1.390050@0] random: fast init done [ 1.390116@0] random: crng init done [ 1.391588@1] Unable to detect cache hierarchy for CPU 0 [ 1.428786@1] loop: module loaded [ 1.429740@1] zram: Added device: zram0 [ 1.430704@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.438042@1] libphy: Fixed MDIO Bus: probed [ 1.441810@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.446515@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.454094@1] PPP generic driver version 2.4.2 [ 1.457654@1] PPP BSD Compression module registered [ 1.462265@1] PPP Deflate Compression module registered [ 1.467512@1] PPP MPPE Compression module registered [ 1.472485@1] NET: Registered protocol family 24 [ 1.477275@1] usbcore: registered new interface driver asix [ 1.482843@1] usbcore: registered new interface driver ax88179_178a [ 1.489107@1] usbcore: registered new interface driver cdc_ether [ 1.495141@1] usbcore: registered new interface driver net1080 [ 1.500999@1] usbcore: registered new interface driver cdc_subset [ 1.507116@1] usbcore: registered new interface driver zaurus [ 1.512925@1] usbcore: registered new interface driver cdc_ncm [ 1.519383@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.525439@1] ehci-pci: EHCI PCI platform driver [ 1.530167@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.536486@1] ohci-pci: OHCI PCI platform driver [ 1.541678@1] usbcore: registered new interface driver cdc_acm [ 1.546965@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.555278@1] usbcore: registered new interface driver usb-storage [ 1.561540@1] usbcore: registered new interface driver usbserial [ 1.568032@0] mousedev: PS/2 mouse device common for all mice [ 1.573596@0] usbcore: registered new interface driver xpad [ 1.579067@1] i2c /dev entries driver [ 1.582629@1] usbcore: registered new interface driver uvcvideo [ 1.588447@1] USB Video Class driver (1.1.1) [ 1.592719@1] md: linear personality registered for level -1 [ 1.598919@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.608499@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.614375@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.622113@1] usbcore: registered new interface driver usbhid [ 1.626078@1] usbhid: USB HID core driver [ 1.630325@1] ashmem: initialized [ 1.633812@1] logger: created 512K log 'log_main' [ 1.638332@1] logger: created 1K log 'log_events' [ 1.643269@1] logger: created 1K log 'log_radio' [ 1.647874@1] logger: created 16K log 'log_system' [ 1.652318@1] exFAT: Version 1.3.0 [ 1.657542@1] ff803000.serial: clock gate not found [ 1.660693@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.667838@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.682819@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.685403@1] console [ttyS0] enabled [ 1.685403@1] console [ttyS0] enabled [ 1.692611@1] bootconsole [aml_uart0] disabled [ 1.692611@1] bootconsole [aml_uart0] disabled [ 1.702130@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.708572@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.718836@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.728657@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.735199@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.747635@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.751656@0] irq = 20 [ 1.753986@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.762793@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.767295@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.772413@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.778942@0] meson-remote: Driver init [ 1.782860@0] meson-remote: remote_probe [ 1.786491@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.791548@0] meson-remote ff808040.rc: don't find the node [ 1.798095@0] meson-remote ff808040.rc: led_blink = 0 [ 1.803098@0] meson-remote ff808040.rc: don't find the node [ 1.809998@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.815640@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.821344@0] meson-remote ff808040.rc: custom_number = 3 [ 1.826659@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.832343@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.839496@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.845796@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.851939@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.857613@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.864767@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.871063@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.877208@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.882879@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.890037@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.896333@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.902463@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.909185@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.914963@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.920741@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.926433@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.932126@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.938078@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.943943@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.949549@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.954896@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.960244@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.966304@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.973252@1] meson-remote: IR XMP protocol handler initialized [ 1.978958@1] efusekeynum: 4 [ 1.981386@1] efusekeyname: mac offset: 0 size: 6 [ 1.987781@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.994161@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.000537@1] efusekeyname: usid offset: 18 size: 16 [ 2.007184@0] efuse efuse: probe OK! [ 2.012752@1] ge2d: ge2d_init_module [ 2.014485@1] [tsync_pcr_init]init success. [ 2.019116@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.025487@0] DI: di_module_init ok. [ 2.028644@0] dim:dim_module_init [ 2.031899@0] dim:dim_module_init finish [ 2.035574@0] dil:dil_init. [ 2.038505@0] dil:dil_init ok. [ 2.041379@0] vdin_drv_init: major 241 [ 2.045303@0] vdin_drv_init: vdin driver init done [ 2.049795@0] [viuin..]viuin_init_module viuin module init [ 2.055608@0] [viuin..]viuin_probe probe ok. [ 2.059705@0] amlvid:info: amlvideo_init called[ 2.063763@0] amlvid:info: amlvideo_create_instance called [ 2.069180@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.074550@1] amlvideo-000: V4L2 device registered as video10 [ 2.079987@1] amlvid:info: amlvideo_create_instance called [ 2.085395@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.090766@3] amlvideo-001: V4L2 device registered as video23 [ 2.096550@3] PPMGRDRV: warn: ppmgr module init func called [ 2.102924@3] videosync_create_instance dev_s ffffffc01dbc9800,dev_s->dev ffffffc01db01380 [ 2.109901@3] videosync_create_instance reg videosync.0 [ 2.115327@3] aml_vecm_init:module init [ 2.115329@0] videosync_thread started [ 2.122931@3] amdolby_vision_init:module init [ 2.127171@3] prime_sl module init [ 2.130755@3] amlogic mtd driver init [ 2.134511@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.139748@3] bl mode descrete [ 2.142656@3] fip_copies 4 [ 2.145338@3] fip_size 0x200000 [ 2.148445@3] nand_clk_ctrl 0xffe07000 [ 2.152150@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.157779@3] nand_clk_ctrl 0xffe07000 [ 2.161478@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.169813@3] plat->aml_nand_device ffffff800a778cf8 [ 2.174323@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.180309@3] NAND device id: c2 dc 90 a2 57 3 [ 2.184500@3] NAND device: Manufacturer ID: [ 2.188553@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.195210@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.200709@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.206229@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.212533@3] mtd->oobavail: 0x10 [ 2.216130@1] aml_nand_init 2119: plat-name:bootloader [ 2.220920@1] Creating 1 MTD partitions on "bootloader": [ 2.226164@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.233626@2] bootloader initialized ok [ 2.235410@2] plat->aml_nand_device ffffff800a778cf8 [ 2.240312@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.246344@2] NAND device id: c2 dc 90 a2 57 3 [ 2.250481@2] NAND device: Manufacturer ID: [ 2.254530@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.261195@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.266690@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.272215@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.278513@2] mtd->oobavail: 0x10 [ 2.282131@2] aml_nand_init 2119: plat-name:nandnormal [ 2.286909@2] bbt_start=20 [ 2.289537@2] env_start=24 [ 2.292219@2] key_start=32 [ 2.294892@2] dtb_start=40 [ 2.297558@2] ddr_start=44 [ 2.300243@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.306719@2] get_free_node 43: bitmap=0 [ 2.310161@2] get_free_node 55: bitmap=1 [ 2.314244@2] get_free_node 43: bitmap=1 [ 2.317929@2] get_free_node 55: bitmap=3 [ 2.322007@2] get_free_node 43: bitmap=3 [ 2.325685@2] get_free_node 55: bitmap=7 [ 2.329566@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.336206@2] nbbt free list: [ 2.339139@2] blockN=21, ec=-1, dirty_flag=0 [ 2.343365@2] blockN=22, ec=-1, dirty_flag=0 [ 2.347591@2] blockN=23, ec=-1, dirty_flag=0 [ 2.351818@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.357226@2] nbbt valid addr: 500000 [ 2.360444@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.366049@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.372292@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.378702@2] get_free_node 43: bitmap=7 [ 2.382178@2] get_free_node 55: bitmap=f [ 2.386263@2] get_free_node 43: bitmap=f [ 2.389941@2] get_free_node 55: bitmap=1f [ 2.394111@2] get_free_node 43: bitmap=1f [ 2.397876@2] get_free_node 55: bitmap=3f [ 2.402046@2] get_free_node 43: bitmap=3f [ 2.405811@2] get_free_node 55: bitmap=7f [ 2.409981@2] get_free_node 43: bitmap=7f [ 2.413746@2] get_free_node 55: bitmap=ff [ 2.417916@2] get_free_node 43: bitmap=ff [ 2.421681@2] get_free_node 55: bitmap=1ff [ 2.425937@2] get_free_node 43: bitmap=1ff [ 2.429787@2] get_free_node 55: bitmap=3ff [ 2.433842@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.440482@2] nenv free list: [ 2.443415@2] blockN=25, ec=-1, dirty_flag=0 [ 2.447641@2] blockN=26, ec=-1, dirty_flag=0 [ 2.451867@2] blockN=27, ec=-1, dirty_flag=0 [ 2.456093@2] blockN=28, ec=-1, dirty_flag=0 [ 2.460320@2] blockN=29, ec=-1, dirty_flag=0 [ 2.464546@2] blockN=30, ec=-1, dirty_flag=0 [ 2.468772@2] blockN=31, ec=-1, dirty_flag=0 [ 2.472999@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.484744@2] nenv valid addr: 610000 [ 2.484764@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.489193@2] get_free_node 43: bitmap=3ff [ 2.493043@2] get_free_node 55: bitmap=7ff [ 2.497300@2] get_free_node 43: bitmap=7ff [ 2.501152@2] get_free_node 55: bitmap=fff [ 2.505408@2] get_free_node 43: bitmap=fff [ 2.509259@2] get_free_node 55: bitmap=1fff [ 2.513601@2] get_free_node 43: bitmap=1fff [ 2.517539@2] get_free_node 55: bitmap=3fff [ 2.521882@2] get_free_node 43: bitmap=3fff [ 2.525819@2] get_free_node 55: bitmap=7fff [ 2.530161@2] get_free_node 43: bitmap=7fff [ 2.534099@2] get_free_node 55: bitmap=ffff [ 2.538441@2] get_free_node 43: bitmap=ffff [ 2.542379@2] get_free_node 55: bitmap=1ffff [ 2.546807@2] get_free_node 43: bitmap=1ffff [ 2.550831@2] get_free_node 55: bitmap=3ffff [ 2.555058@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.561698@2] nkey free list: [ 2.564631@2] blockN=32, ec=-1, dirty_flag=0 [ 2.568857@2] blockN=33, ec=-1, dirty_flag=0 [ 2.573086@2] blockN=34, ec=-1, dirty_flag=0 [ 2.577310@2] blockN=35, ec=-1, dirty_flag=0 [ 2.581536@2] blockN=36, ec=-1, dirty_flag=0 [ 2.585762@2] blockN=37, ec=-1, dirty_flag=0 [ 2.589988@2] blockN=38, ec=-1, dirty_flag=0 [ 2.594214@2] blockN=39, ec=-1, dirty_flag=0 [ 2.598441@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.603529@2] nkey valid addr: fffffffffffc0000 [ 2.608014@2] aml_nand_key_check 1251 NO key exist [ 2.612759@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.619375@2] get_free_node 43: bitmap=3ffff [ 2.623195@2] get_free_node 55: bitmap=7ffff [ 2.627625@2] get_free_node 43: bitmap=7ffff [ 2.631647@2] get_free_node 55: bitmap=fffff [ 2.636077@2] get_free_node 43: bitmap=fffff [ 2.640099@2] get_free_node 55: bitmap=1fffff [ 2.644413@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.651053@2] ndtb free list: [ 2.653978@2] blockN=41, ec=-1, dirty_flag=0 [ 2.658212@2] blockN=42, ec=-1, dirty_flag=0 [ 2.662438@2] blockN=43, ec=-1, dirty_flag=0 [ 2.666665@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.684648@2] ndtb valid addr: a00000 [ 2.684668@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.689103@2] get_free_node 43: bitmap=1fffff [ 2.693213@2] get_free_node 55: bitmap=3fffff [ 2.697728@2] get_free_node 43: bitmap=3fffff [ 2.701838@2] get_free_node 55: bitmap=7fffff [ 2.706150@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.712791@2] nddr free list: [ 2.715723@2] blockN=44, ec=-1, dirty_flag=0 [ 2.719949@2] blockN=45, ec=-1, dirty_flag=0 [ 2.724176@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.729265@2] nddr valid addr: fffffffffffc0000 [ 2.733750@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.738496@2] tpl: off 16777216, size 8388608 [ 2.804700@2] Creating 7 MTD partitions on "nandnormal": [ 2.804730@2] 0x000001000000-0x000001800000 : "tpl" [ 2.811725@2] 0x000001800000-0x000001a00000 : "misc" [ 2.815599@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.820424@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.827564@1] 0x000002c00000-0x000003b00000 : "boot" [ 2.832288@1] 0x000003b00000-0x000015300000 : "system" [ 2.871131@1] 0x000015300000-0x000020000000 : "data" [ 2.894364@1] nandnormal initialized ok [ 2.894445@1] aml_ubootenv_init: register env chardev [ 2.897817@1] aml_ubootenv_init: register env chardev OK [ 2.903047@1] amlnf_dtb_init: register dtb cdev [ 2.907581@1] amlnf_dtb_init: register dtd cdev OK [ 2.912103@1] mtd_nand_probe 267 , err = 0 [ 2.916827@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.922433@1] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.929255@1] unifykey: storage in base: 0xffffffc005000000 [ 2.934192@1] unifykey: storage out base: 0xffffffc005040000 [ 2.939765@1] unifykey: storage block base: 0xffffffc005080000 [ 2.945541@1] unifykey: probe done! [ 2.949438@1] unifykey: no efuse-version set, use default value: -1 [ 2.955221@1] unifykey: key unify config unifykey-num is 6 [ 2.960674@1] unifykey: key unify fact unifykey-num is 6 [ 2.965899@1] unifykey: unifykey_devno: ee00000 [ 2.970654@1] unifykey: device unifykeys created ok [ 2.975300@1] unifykey: aml_unifykeys_init done! [ 2.980072@1] audio_dsp: [dsp]register dsp to char divece(257) [ 2.986533@1] amlkaraoke init success! [ 2.989573@1] sysled: module init [ 2.992953@1] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.997913@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.005024@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.011593@0] amlogic rfkill init [ 3.016200@2] dmc_monitor_probe [ 3.017955@2] page_trace_module_init, create sysfs failed [ 3.023687@2] defendkey defendkey: Reserved memory is not enough! [ 3.029155@2] defendkey: probe of defendkey failed with error -22 [ 3.036147@2] usbcore: registered new interface driver snd-usb-audio [ 3.045288@2] asoc debug: aml_audio_controller_probe-130 [ 3.047247@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.052548@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.060336@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.067511@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.073888@2] aml_tdm_platform_probe(), share en = 1[ 3.078623@2] No channel mask node Channel_Mask [ 3.083415@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.088932@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.096890@2] aml_tdm_platform_probe(), share en = 1[ 3.101399@2] No channel mask node Channel_Mask [ 3.106152@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.111701@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.119664@2] aml_tdm_platform_probe(), share en = 1[ 3.124168@2] No channel mask node Channel_Mask [ 3.129735@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.136821@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.144902@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.154970@2] Register vad [ 3.155979@2] check whether to update sound card init data [ 3.161815@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.168775@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.176091@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.181697@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.189375@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.196697@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.202573@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.209061@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.216174@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.222108@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.229001@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.234828@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.241575@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.249409@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.256330@0] snd_card_add_kcontrols card:ffffffc01c96a018 [ 3.261414@0] effect_v2 is not init [ 3.264840@0] Failed to add VAD controls [ 3.269109@0] GACT probability NOT on [ 3.272369@0] Mirror/redirect action on [ 3.276142@0] u32 classifier [ 3.278979@0] Actions configured [ 3.282513@0] Netfilter messages via NETLINK v0.30. [ 3.287603@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.293808@0] ctnetlink v0.93: registering with nfnetlink. [ 3.299494@1] xt_time: kernel timezone is -0000 [ 3.303496@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.309699@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.314720@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.320275@1] Initializing XFRM netlink socket [ 3.325252@1] NET: Registered protocol family 10 [ 3.330433@1] mip6: Mobile IPv6 [ 3.332342@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.338141@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.345145@1] NET: Registered protocol family 17 [ 3.348481@1] NET: Registered protocol family 15 [ 3.353034@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.366151@1] Bluetooth: RFCOMM TTY layer initialized [ 3.371028@1] Bluetooth: RFCOMM socket layer initialized [ 3.376307@1] Bluetooth: RFCOMM ver 1.11 [ 3.380162@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.385588@1] Bluetooth: BNEP filters: protocol multicast [ 3.390941@1] Bluetooth: BNEP socket layer initialized [ 3.396025@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.402064@1] Bluetooth: HIDP socket layer initialized [ 3.407262@1] l2tp_core: L2TP core driver, V2.0 [ 3.411654@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.416550@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.422278@1] l2tp_netlink: L2TP netlink interface [ 3.427044@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.433064@1] l2tp_debugfs: L2TP debugfs support [ 3.437595@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.444199@1] NET: Registered protocol family 35 [ 3.448961@1] Key type dns_resolver registered [ 3.454135@1] Registered swp emulation handler [ 3.457614@1] Registered cp15_barrier emulation handler [ 3.462758@1] Registered setend emulation handler [ 3.467415@1] disable EAS feature [ 3.471566@0] registered taskstats version 1 [ 3.484297@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.990530@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.990597@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.998803@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.007206@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.014112@1] hub 1-0:1.0: USB hub found [ 4.017158@1] hub 1-0:1.0: 1 port detected [ 4.021442@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.026714@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.034532@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.043429@2] hub 2-0:1.0: USB hub found [ 4.046570@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.053944@2] usb usb2: Unsupported the hub [ 4.058344@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.066431@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.175273@2] dwc_otg: Core Release: 3.10a [ 4.175314@2] dwc_otg: Setting default values for core params [ 4.179459@2] dwc_otg: curmode: 0, host_only: 0 [ 4.196261@2] dwc_otg: Using Buffer DMA mode [ 4.196284@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.200165@2] dwc_otg: Working on port type = SLAVE [ 4.204997@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.212212@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.221616@2] gxbb_pm: enter meson_pm_probe! [ 4.221654@2] no vddio3v3_en pin[ 4.223331@2] pm-meson aml_pm: Can't get switch_clk81 [ 4.228336@2] gxbb_pm: meson_pm_probe done [ 4.23271WHHHHMIšÂʺÉuµ•Í½¹}Õ…ÉÑ™™áÁÍÁÁÁ¹Í•É¥…±éÑÑåMÁÕÍ•áÑ…±¡á5¥ÉÑÁÁÁÁÁÁ¡…¹•ÅÅÕÉÁÁѽÅÅÕÉÁÁ5)mѹÉÑÑÍåÉÉuÉ••¥¹Õ¹ÕÍ•‘­•É¹•±µ•µ½ÉåéÕÁÕÙ-5)ÿ/dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.453991@1] ubi0: attaching mtd6 [ 4.982334@1] ubi0: scanning is finished [ 4.986432@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.986719@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.993726@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.000614@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.007684@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.013904@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.021223@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.030456@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.039892@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.045874@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.090560@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.092530@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.102501@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.113277@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.119230@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.312256@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.373173@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.457325@1] ubi1: attaching mtd7 [ 5.783683@1] ubi1: scanning is finished [ 5.787615@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.787732@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.794741@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.801627@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.808693@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.814820@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.822149@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.831381@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.840705@2] ubi1: background thread "ubi_bgt1d" started, PID 2032 UBI device number 1, total 692 L[ 5.850127@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.873740@1] UBIFS (ubi1:0): recovery needed [ 5.957820@1] UBIFS (ubi1:0): recovery completed [ 5.957982@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.964164@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.974160@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.984851@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.991580@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2f92450 --- 0 [ 7.022427@1] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.033874@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.033911@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.040957@2] aml_tdm_open [ 7.042093@2] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for A[ 7.051139@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.056112@3] cpufreq_interactive: no need to active hmp boost! WE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.139632@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.143308@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.149740@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.198112@1] asoc-aml-card auge_sound: tdm playback enable [ 7.361027@0] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894084 [ 7.361437@0] asoc-aml-card auge_sound: tdm capture stop [ 7.366826@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.372225@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.378082@1] asoc-aml-card auge_sound: tdm capture enable [ 7.390364@3] asoc-aml-card auge_sound: tdm playback stop [ 7.436835@1] asoc-aml-card auge_sound: tdm playback enable [ 8.669101@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.332717@2] asoc-aml-card auge_sound: tdm playback stop [ 14.332943@2] asoc-aml-card auge_sound: tdm capture stop [ 14.337874@2] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.335232@1] mtd_nand_reboot_notifier 35 [ 16.335498@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.343694@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.346904@1] usb usb2: USB disconnect, device number 1 [ 16.356836@2] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.357743@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.362960@2] usb usb1: USB disconnect, device number 1 [ 16.368862@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.390915@0] reboot: Restarting system [ 16.391029@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22025 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015880 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974983 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129130@0] ftrace: allocating 43519 entries in 170 pages [ 0.209529@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214669@0] ASID allocator initialised with 32768 entries [ 0.252646@0] secmon: can't fine clear_range [ 0.253233@0] EFI services will not be available. [ 0.256075@0] Meson chip version = RevC (25:C - 43:0) [ 0.290005@1] Detected VIPT I-cache on CPU1 [ 0.290065@1] CPU1: update cpu_capacity 1024 [ 0.290068@1] CPU1: Booted secondary processor [410fd034] [ 0.318056@2] Detected VIPT I-cache on CPU2 [ 0.318110@2] CPU2: update cpu_capacity 1024 [ 0.318113@2] CPU2: Booted secondary processor [410fd034] [ 0.346124@3] Detected VIPT I-cache on CPU3 [ 0.346177@3] CPU3: update cpu_capacity 1024 [ 0.346179@3] CPU3: Booted secondary processor [410fd034] [ 0.346270@0] Brought up 4 CPUs [ 0.385490@0] SMP: Total of 4 processors activated. [ 0.390399@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396435@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407399@0] CPU: All CPU(s) started at EL2 [ 0.408175@0] alternatives: patching kernel code [ 0.413576@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420712@0] devtmpfs: initialized [ 0.436154@0] DMI not present or invalid. [ 0.436540@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444537@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451095@0] pinctrl core: initialized pinctrl subsystem [ 0.457707@0] NET: Registered protocol family 16 [ 0.477028@0] cpuidle: using governor menu [ 0.477169@0] register canvas platform driver [ 0.479897@0] register rdma platform driver [ 0.485345@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491715@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499188@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505332@0] clkmsr: clkmsr: driver init [ 0.509035@0] codec_mm_module_init [ 0.512462@0] media_configs_system_init [ 0.516605@0] aml_watch_point_probe, in, wp:2 [ 0.522132@0] pstore: using zlib compression [ 0.525524@0] console [pstore-1] enabled [ 0.528852@0] pstore: Registered ramoops as persistent store backend [ 0.535266@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549293@0] aml_iomap: amlogic iomap probe done [ 0.553925@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555892@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564889@0] audio_clocks: audio_clocks_probe done [ 0.573425@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573481@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578649@0] amlogic auge_snd_iomap probe done [ 0.861730@0] vgaarb: loaded [ 0.862125@0] SCSI subsystem initialized [ 0.863241@0] usbcore: registered new interface driver usbfs [ 0.868731@0] usbcore: registered new interface driver hub [ 0.874239@0] usbcore: registered new device driver usb [ 0.879511@0] Linux video capture interface: v2.00 [ 0.884270@0] pps_core: LinuxPPS API ver. 1 registered [ 0.889351@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898733@0] PTP clock support registered [ 0.903254@0] dmi: Firmware registration failed. [ 0.907920@0] secmon: reserve_mem_size:0x300000 [ 0.912084@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.918973@0] secmon: get page:ffffffbf00140000, 5000 [ 0.923725@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932115@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938857@0] fb: osd_init_module [ 0.943332@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.948947@0] Bluetooth: Core ver 2.22 [ 0.952043@0] NET: Registered protocol family 31 [ 0.956640@0] Bluetooth: HCI device and connection manager initialized [ 0.963193@0] Bluetooth: HCI socket layer initialized [ 0.968258@0] Bluetooth: L2CAP socket layer initialized [ 0.973578@0] Bluetooth: SCO socket layer initialized [ 0.982663@0] NetLabel: Initializing [ 0.982696@0] NetLabel: domain hash size = 128 [ 0.986724@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.991948@0] NetLabel: unlabeled traffic allowed by default [ 0.999399@1] clocksource: Switched to clocksource arch_sys_counter [ 1.099775@1] VFS: Disk quotas dquot_6.6.0 [ 1.099883@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118693@1] NET: Registered protocol family 2 [ 1.119468@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.124891@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131585@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.138345@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.144217@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.150791@0] NET: Registered protocol family 1 [ 1.155663@0] RPC: Registered named UNIX socket transport module. [ 1.161278@0] RPC: Registered udp transport module. [ 1.166149@0] RPC: Registered tcp transport module. [ 1.171047@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179075@0] Unpacking initramfs... [ 1.280593@0] Freeing initrd memory: 2308K [ 1.282018@0] hw perfevents: clusterb_enabled = 0 [ 1.283935@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.288302@0] hw perfevents: cluster A irq = 7 [ 1.292814@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.302202@0] audit: initializing netlink subsys (disabled) [ 1.306353@0] audit: type=2000 audit(1.076:1): initialized [ 1.313013@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.333952@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.339937@0] NFS: Registering the id_resolver key type [ 1.340003@0] Key type id_resolver registered [ 1.343992@0] Key type id_legacy registered [ 1.348513@0] fuse init (API version 7.26) [ 1.357031@0] NET: Registered protocol family 38 [ 1.357076@0] Key type asymmetric registered [ 1.361211@0] Asymmetric key parser 'x509' registered [ 1.366556@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.373908@0] io scheduler noop registered (default) [ 1.378878@0] io scheduler deadline registered [ 1.383676@0] io scheduler cfq registered [ 1.398623@0] Unable to detect cache hierarchy for CPU 0 [ 1.398796@0] random: fast init done [ 1.402053@0] random: crng init done [ 1.420265@2] loop: module loaded [ 1.421178@2] zram: Added device: zram0 [ 1.422202@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.429367@2] libphy: Fixed MDIO Bus: probed [ 1.433225@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.438007@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.445631@2] PPP generic driver version 2.4.2 [ 1.449119@2] PPP BSD Compression module registered [ 1.453752@2] PPP Deflate Compression module registered [ 1.458997@2] PPP MPPE Compression module registered [ 1.463967@2] NET: Registered protocol family 24 [ 1.468743@2] usbcore: registered new interface driver asix [ 1.474335@2] usbcore: registered new interface driver ax88179_178a [ 1.480614@2] usbcore: registered new interface driver cdc_ether [ 1.486631@2] usbcore: registered new interface driver net1080 [ 1.492488@2] usbcore: registered new interface driver cdc_subset [ 1.498620@2] usbcore: registered new interface driver zaurus [ 1.504406@2] usbcore: registered new interface driver cdc_ncm [ 1.510880@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.516933@2] ehci-pci: EHCI PCI platform driver [ 1.521665@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.527970@2] ohci-pci: OHCI PCI platform driver [ 1.533148@2] usbcore: registered new interface driver cdc_acm [ 1.538456@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.546773@2] usbcore: registered new interface driver usb-storage [ 1.553028@2] usbcore: registered new interface driver usbserial [ 1.559583@1] mousedev: PS/2 mouse device common for all mice [ 1.565085@1] usbcore: registered new interface driver xpad [ 1.570546@1] i2c /dev entries driver [ 1.574134@1] usbcore: registered new interface driver uvcvideo [ 1.579939@1] USB Video Class driver (1.1.1) [ 1.584200@1] md: linear personality registered for level -1 [ 1.590394@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.600032@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.605885@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.613648@3] usbcore: registered new interface driver usbhid [ 1.617570@3] usbhid: USB HID core driver [ 1.621809@0] ashmem: initialized [ 1.625279@3] logger: created 512K log 'log_main' [ 1.629799@0] logger: created 1K log 'log_events' [ 1.634536@0] logger: created 1K log 'log_radio' [ 1.639163@0] logger: created 16K log 'log_system' [ 1.643799@0] exFAT: Version 1.3.0 [ 1.648487@0] ff803000.serial: clock gate not found [ 1.652172@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.659324@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.674304@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.676894@0] console [ttyS0] enabled [ 1.676894@0] console [ttyS0] enabled [ 1.684097@0] bootconsole [aml_uart0] disabled [ 1.684097@0] bootconsole [aml_uart0] disabled [ 1.693607@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.700056@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.710353@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.720150@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.726660@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.739056@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.743169@1] irq = 20 [ 1.745482@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.754304@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.758727@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.764011@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.770401@1] meson-remote: Driver init [ 1.774353@1] meson-remote: remote_probe [ 1.777973@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.783030@1] meson-remote ff808040.rc: don't find the node [ 1.789582@1] meson-remote ff808040.rc: led_blink = 0 [ 1.794584@1] meson-remote ff808040.rc: don't find the node [ 1.801484@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.807129@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.812824@1] meson-remote ff808040.rc: custom_number = 3 [ 1.818143@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.823825@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.830982@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.837278@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.843424@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.849094@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.856252@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.862548@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.868697@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.874365@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.881523@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.887819@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.893948@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.900671@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.906448@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.912227@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.917920@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.923612@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.929563@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.935429@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.941034@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.946382@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.951729@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.957740@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.964745@1] meson-remote: IR XMP protocol handler initialized [ 1.970384@1] efusekeynum: 4 [ 1.972908@1] efusekeyname: mac offset: 0 size: 6 [ 1.979256@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.985641@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.992018@1] efusekeyname: usid offset: 18 size: 16 [ 1.998663@2] efuse efuse: probe OK! [ 2.004325@3] ge2d: ge2d_init_module [ 2.005974@3] [tsync_pcr_init]init success. [ 2.010521@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.017036@2] DI: di_module_init ok. [ 2.020148@2] dim:dim_module_init [ 2.023343@2] dim:dim_module_init finish [ 2.027067@2] dil:dil_init. [ 2.030012@2] dil:dil_init ok. [ 2.032890@2] vdin_drv_init: major 241 [ 2.036789@2] vdin_drv_init: vdin driver init done [ 2.041285@2] [viuin..]viuin_init_module viuin module init [ 2.047102@2] [viuin..]viuin_probe probe ok. [ 2.051203@2] amlvid:info: amlvideo_init called[ 2.055254@2] amlvid:info: amlvideo_create_instance called [ 2.060668@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.066026@3] amlvideo-000: V4L2 device registered as video10 [ 2.071469@3] amlvid:info: amlvideo_create_instance called [ 2.076884@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.082387@3] amlvideo-001: V4L2 device registered as video23 [ 2.087976@3] PPMGRDRV: warn: ppmgr module init func called [ 2.094251@3] videosync_create_instance dev_s ffffffc01ca10800,dev_s->dev ffffffc01d8ac800 [ 2.101404@3] videosync_create_instance reg videosync.0 [ 2.106817@3] aml_vecm_init:module init [ 2.106818@0] videosync_thread started [ 2.114393@3] amdolby_vision_init:module init [ 2.118666@3] prime_sl module init [ 2.122311@3] amlogic mtd driver init [ 2.125996@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.131224@3] bl mode descrete [ 2.134151@3] fip_copies 4 [ 2.136822@3] fip_size 0x200000 [ 2.139926@3] nand_clk_ctrl 0xffe07000 [ 2.143635@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.149279@3] nand_clk_ctrl 0xffe07000 [ 2.152965@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.161298@3] plat->aml_nand_device ffffff800a778cf8 [ 2.165832@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.171793@3] NAND device id: c2 dc 90 a2 57 3 [ 2.175986@3] NAND device: Manufacturer ID: [ 2.180034@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.186694@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.192194@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.197716@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.204016@3] mtd->oobavail: 0x10 [ 2.207601@0] aml_nand_init 2119: plat-name:bootloader [ 2.212393@0] Creating 1 MTD partitions on "bootloader": [ 2.217645@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.225415@0] bootloader initialized ok [ 2.226867@0] plat->aml_nand_device ffffff800a778cf8 [ 2.231805@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.237830@0] NAND device id: c2 dc 90 a2 57 3 [ 2.241968@0] NAND device: Manufacturer ID: [ 2.246015@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.252674@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.258175@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.263697@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.270014@0] mtd->oobavail: 0x10 [ 2.273490@0] aml_nand_init 2119: plat-name:nandnormal [ 2.278396@0] bbt_start=20 [ 2.281032@0] env_start=24 [ 2.283711@0] key_start=32 [ 2.286370@0] dtb_start=40 [ 2.289052@0] ddr_start=44 [ 2.291728@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.298207@0] get_free_node 43: bitmap=0 [ 2.301646@0] get_free_node 55: bitmap=1 [ 2.305730@0] get_free_node 43: bitmap=1 [ 2.309408@0] get_free_node 55: bitmap=3 [ 2.313492@0] get_free_node 43: bitmap=3 [ 2.317170@0] get_free_node 55: bitmap=7 [ 2.321052@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.327692@0] nbbt free list: [ 2.330617@0] blockN=21, ec=-1, dirty_flag=0 [ 2.334851@0] blockN=22, ec=-1, dirty_flag=0 [ 2.339077@0] blockN=23, ec=-1, dirty_flag=0 [ 2.343304@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.348712@0] nbbt valid addr: 500000 [ 2.351930@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.357536@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.363777@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.370187@0] get_free_node 43: bitmap=7 [ 2.373664@0] get_free_node 55: bitmap=f [ 2.377748@0] get_free_node 43: bitmap=f [ 2.381427@0] get_free_node 55: bitmap=1f [ 2.385597@0] get_free_node 43: bitmap=1f [ 2.389361@0] get_free_node 55: bitmap=3f [ 2.393532@0] get_free_node 43: bitmap=3f [ 2.397297@0] get_free_node 55: bitmap=7f [ 2.401467@0] get_free_node 43: bitmap=7f [ 2.405232@0] get_free_node 55: bitmap=ff [ 2.409401@0] get_free_node 43: bitmap=ff [ 2.413166@0] get_free_node 55: bitmap=1ff [ 2.417422@0] get_free_node 43: bitmap=1ff [ 2.421274@0] get_free_node 55: bitmap=3ff [ 2.425327@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.431968@0] nenv free list: [ 2.434893@0] blockN=25, ec=-1, dirty_flag=0 [ 2.439127@0] blockN=26, ec=-1, dirty_flag=0 [ 2.443353@0] blockN=27, ec=-1, dirty_flag=0 [ 2.447580@0] blockN=28, ec=-1, dirty_flag=0 [ 2.451805@0] blockN=29, ec=-1, dirty_flag=0 [ 2.456032@0] blockN=30, ec=-1, dirty_flag=0 [ 2.460258@0] blockN=31, ec=-1, dirty_flag=0 [ 2.464484@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.476232@0] nenv valid addr: 610000 [ 2.476252@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.480679@0] get_free_node 43: bitmap=3ff [ 2.484530@0] get_free_node 55: bitmap=7ff [ 2.488786@0] get_free_node 43: bitmap=7ff [ 2.492637@0] get_free_node 55: bitmap=fff [ 2.496894@0] get_free_node 43: bitmap=fff [ 2.500745@0] get_free_node 55: bitmap=1fff [ 2.505088@0] get_free_node 43: bitmap=1fff [ 2.509025@0] get_free_node 55: bitmap=3fff [ 2.513367@0] get_free_node 43: bitmap=3fff [ 2.517305@0] get_free_node 55: bitmap=7fff [ 2.521647@0] get_free_node 43: bitmap=7fff [ 2.525585@0] get_free_node 55: bitmap=ffff [ 2.529927@0] get_free_node 43: bitmap=ffff [ 2.533865@0] get_free_node 55: bitmap=1ffff [ 2.538293@0] get_free_node 43: bitmap=1ffff [ 2.542321@0] get_free_node 55: bitmap=3ffff [ 2.546544@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.553184@0] nkey free list: [ 2.556117@0] blockN=32, ec=-1, dirty_flag=0 [ 2.560343@0] blockN=33, ec=-1, dirty_flag=0 [ 2.564569@0] blockN=34, ec=-1, dirty_flag=0 [ 2.568795@0] blockN=35, ec=-1, dirty_flag=0 [ 2.573021@0] blockN=36, ec=-1, dirty_flag=0 [ 2.577247@0] blockN=37, ec=-1, dirty_flag=0 [ 2.581474@0] blockN=38, ec=-1, dirty_flag=0 [ 2.585700@0] blockN=39, ec=-1, dirty_flag=0 [ 2.589926@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.595015@0] nkey valid addr: fffffffffffc0000 [ 2.599501@0] aml_nand_key_check 1251 NO key exist [ 2.604245@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.610859@0] get_free_node 43: bitmap=3ffff [ 2.614681@0] get_free_node 55: bitmap=7ffff [ 2.619110@0] get_free_node 43: bitmap=7ffff [ 2.623134@0] get_free_node 55: bitmap=fffff [ 2.627674@0] get_free_node 43: bitmap=fffff [ 2.631588@0] get_free_node 55: bitmap=1fffff [ 2.635899@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.642538@0] ndtb free list: [ 2.645471@0] blockN=41, ec=-1, dirty_flag=0 [ 2.649698@0] blockN=42, ec=-1, dirty_flag=0 [ 2.653924@0] blockN=43, ec=-1, dirty_flag=0 [ 2.658150@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.676137@0] ndtb valid addr: a00000 [ 2.676157@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.680589@0] get_free_node 43: bitmap=1fffff [ 2.684699@0] get_free_node 55: bitmap=3fffff [ 2.689214@0] get_free_node 43: bitmap=3fffff [ 2.693323@0] get_free_node 55: bitmap=7fffff [ 2.697636@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.704276@0] nddr free list: [ 2.707201@0] blockN=44, ec=-1, dirty_flag=0 [ 2.711435@0] blockN=45, ec=-1, dirty_flag=0 [ 2.715662@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.720750@0] nddr valid addr: fffffffffffc0000 [ 2.725236@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.729982@0] tpl: off 16777216, size 8388608 [ 2.796323@0] Creating 7 MTD partitions on "nandnormal": [ 2.796354@0] 0x000001000000-0x000001800000 : "tpl" [ 2.803604@3] 0x000001800000-0x000001a00000 : "misc" [ 2.807560@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.812078@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.819133@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.823910@3] 0x000003b00000-0x000015300000 : "system" [ 2.862790@3] 0x000015300000-0x000020000000 : "data" [ 2.886028@3] nandnormal initialized ok [ 2.886109@3] aml_ubootenv_init: register env chardev [ 2.889480@3] aml_ubootenv_init: register env chardev OK [ 2.894697@3] amlnf_dtb_init: register dtb cdev [ 2.899218@3] amlnf_dtb_init: register dtd cdev OK [ 2.903765@3] mtd_nand_probe 267 , err = 0 [ 2.908476@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.914102@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.920915@3] unifykey: storage in base: 0xffffffc005000000 [ 2.925844@3] unifykey: storage out base: 0xffffffc005040000 [ 2.931436@3] unifykey: storage block base: 0xffffffc005080000 [ 2.937205@3] unifykey: probe done! [ 2.941110@3] unifykey: no efuse-version set, use default value: -1 [ 2.946879@3] unifykey: key unify config unifykey-num is 6 [ 2.952346@3] unifykey: key unify fact unifykey-num is 6 [ 2.957563@3] unifykey: unifykey_devno: ee00000 [ 2.962328@3] unifykey: device unifykeys created ok [ 2.966963@3] unifykey: aml_unifykeys_init done! [ 2.971738@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.978210@3] amlkaraoke init success! [ 2.981225@3] sysled: module init [ 2.984628@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.989580@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.996687@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.003231@3] amlogic rfkill init [ 3.007928@3] dmc_monitor_probe [ 3.009619@3] page_trace_module_init, create sysfs failed [ 3.023307@3] defendkey defendkey: Reserved memory is not enough! [ 3.023803@3] defendkey: probe of defendkey failed with error -22 [ 3.030804@3] usbcore: registered new interface driver snd-usb-audio [ 3.040099@3] asoc debug: aml_audio_controller_probe-130 [ 3.041847@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.047200@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.054991@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.062166@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.068537@3] aml_tdm_platform_probe(), share en = 1[ 3.073273@3] No channel mask node Channel_Mask [ 3.078143@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.083600@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.091599@3] aml_tdm_platform_probe(), share en = 1[ 3.096064@1] No channel mask node Channel_Mask [ 3.100801@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.106354@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.114293@1] aml_tdm_platform_probe(), share en = 1[ 3.118815@1] No channel mask node Channel_Mask [ 3.124411@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.131469@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.139566@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.149511@2] Register vad [ 3.150622@2] check whether to update sound card init data [ 3.156477@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.163425@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.170743@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.176347@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.184024@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.191413@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.197226@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.203714@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.210773@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.216757@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.223733@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.229476@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.236229@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.244624@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.251015@0] snd_card_add_kcontrols card:ffffffc01ca28818 [ 3.256079@0] effect_v2 is not init [ 3.259530@0] Failed to add VAD controls [ 3.263726@0] GACT probability NOT on [ 3.266998@0] Mirror/redirect action on [ 3.270832@0] u32 classifier [ 3.273632@0] Actions configured [ 3.277171@0] Netfilter messages via NETLINK v0.30. [ 3.282256@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.288455@0] ctnetlink v0.93: registering with nfnetlink. [ 3.294191@3] xt_time: kernel timezone is -0000 [ 3.298146@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.304336@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.309369@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.314928@3] Initializing XFRM netlink socket [ 3.319921@3] NET: Registered protocol family 10 [ 3.325095@3] mip6: Mobile IPv6 [ 3.326956@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.332805@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.339828@3] NET: Registered protocol family 17 [ 3.343087@3] NET: Registered protocol family 15 [ 3.347701@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.360803@3] Bluetooth: RFCOMM TTY layer initialized [ 3.365682@3] Bluetooth: RFCOMM socket layer initialized [ 3.370980@3] Bluetooth: RFCOMM ver 1.11 [ 3.374814@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.380240@3] Bluetooth: BNEP filters: protocol multicast [ 3.385591@3] Bluetooth: BNEP socket layer initialized [ 3.390676@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.396715@3] Bluetooth: HIDP socket layer initialized [ 3.401896@3] l2tp_core: L2TP core driver, V2.0 [ 3.406307@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.411201@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.416928@3] l2tp_netlink: L2TP netlink interface [ 3.421692@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.427711@3] l2tp_debugfs: L2TP debugfs support [ 3.432246@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.438849@3] NET: Registered protocol family 35 [ 3.443625@3] Key type dns_resolver registered [ 3.448779@3] Registered swp emulation handler [ 3.452194@3] Registered cp15_barrier emulation handler [ 3.457357@3] Registered setend emulation handler [ 3.462060@3] disable EAS feature [ 3.466066@1] registered taskstats version 1 [ 3.478957@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.985192@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.985249@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.993383@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.001863@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.008805@0] hub 1-0:1.0: USB hub found [ 4.011778@0] hub 1-0:1.0: 1 port detected [ 4.016123@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.021376@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.029196@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.038202@1] hub 2-0:1.0: USB hub found [ 4.041303@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.048549@1] usb usb2: Unsupported the hub [ 4.053000@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.061097@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.169720@1] dwc_otg: Core Release: 3.10a [ 4.169784@1] dwc_otg: Setting default values for core params [ 4.173925@1] dwc_otg: curmode: 0, host_only: 0 [ 4.190705@1] dwc_otg: Using Buffer DMA mode [ 4.190728@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.194608@1] dwc_otg: Working on port type = SLAVE [ 4.199442@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.206507@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.216026@1] gxbb_pm: enter meson_pm_probe! [ 4.216066@1] no vddio3v3_en pin[ 4.217707@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.222762@1] gxbb_pm: meson_pm_probe done [ 4.22712¬š—™¦&TSj•Í½¹}Õ…ÉÑ™™áÁÍÁÁÁ¹Í•É¥…±éÑÑåMÁÕÍ•áÑ…±¡á5¥ÉÑÁÁÁÁÁÁ¡…¹•ÅÅÕÉÁÁѽÅÅÕÉÁÁ5)mѹÉÍááÅÑÅuÉ••¥¹Õ¹ÕÍ•‘­•É¹•±µ•µ½ÉåéÕÁÕÙ-5)ÿ/dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.446313@3] ubi0: attaching mtd6 [ 4.974661@3] ubi0: scanning is finished [ 4.978770@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.979059@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.986069@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.992955@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.000022@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.006235@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.013562@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.022794@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.032229@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.038072@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.082898@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.084868@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.094843@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.105618@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.111570@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.289107@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.347458@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.433140@1] ubi1: attaching mtd7 [ 5.759496@1] ubi1: scanning is finished [ 5.763495@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.763607@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.770613@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.777502@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.784568@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.790695@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.798023@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.807255@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.816579@2] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.825866@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.849457@1] UBIFS (ubi1:0): recovery needed [ 5.935954@0] UBIFS (ubi1:0): recovery completed [ 5.936115@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.942290@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.952294@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.963033@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.969716@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f30b8450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.999306@3] aml_tdm_open [ 7.009166@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.009203@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.016251@3] aml_tdm_open [ 7.017393@3] Not init audio effects Opened TCP tuning i[ 7.022634@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.028873@1] cpufreq_interactive: no need to active hmp boost! nterface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.118234@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.121898@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.128331@3] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.177050@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687532@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22024 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015887 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975352 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036441@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106549@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129133@0] ftrace: allocating 43519 entries in 170 pages [ 0.209518@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210325@0] CPU0: update cpu_capacity 1024 [ 0.214651@0] ASID allocator initialised with 32768 entries [ 0.252633@0] secmon: can't fine clear_range [ 0.253210@0] EFI services will not be available. [ 0.256065@0] Meson chip version = RevC (25:C - 43:0) [ 0.289992@1] Detected VIPT I-cache on CPU1 [ 0.290053@1] CPU1: update cpu_capacity 1024 [ 0.290056@1] CPU1: Booted secondary processor [410fd034] [ 0.318056@2] Detected VIPT I-cache on CPU2 [ 0.318109@2] CPU2: update cpu_capacity 1024 [ 0.318112@2] CPU2: Booted secondary processor [410fd034] [ 0.346111@3] Detected VIPT I-cache on CPU3 [ 0.346160@3] CPU3: update cpu_capacity 1024 [ 0.346163@3] CPU3: Booted secondary processor [410fd034] [ 0.346253@0] Brought up 4 CPUs [ 0.385473@0] SMP: Total of 4 processors activated. [ 0.390382@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396418@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407383@0] CPU: All CPU(s) started at EL2 [ 0.408159@0] alternatives: patching kernel code [ 0.413561@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420694@0] devtmpfs: initialized [ 0.436144@0] DMI not present or invalid. [ 0.436528@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444528@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451086@0] pinctrl core: initialized pinctrl subsystem [ 0.457619@0] NET: Registered protocol family 16 [ 0.485019@3] cpuidle: using governor menu [ 0.485167@3] register canvas platform driver [ 0.487960@3] register rdma platform driver [ 0.493353@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499710@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507179@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513300@3] clkmsr: clkmsr: driver init [ 0.517017@3] codec_mm_module_init [ 0.520458@3] media_configs_system_init [ 0.524598@3] aml_watch_point_probe, in, wp:2 [ 0.529264@3] pstore: using zlib compression [ 0.533513@3] console [pstore-1] enabled [ 0.536849@3] pstore: Registered ramoops as persistent store backend [ 0.543259@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557314@0] aml_iomap: amlogic iomap probe done [ 0.562074@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563951@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572957@3] audio_clocks: audio_clocks_probe done [ 0.581656@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581712@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586867@3] amlogic auge_snd_iomap probe done [ 0.857482@3] vgaarb: loaded [ 0.857858@3] SCSI subsystem initialized [ 0.858985@3] usbcore: registered new interface driver usbfs [ 0.864457@3] usbcore: registered new interface driver hub [ 0.870012@3] usbcore: registered new device driver usb [ 0.875263@3] Linux video capture interface: v2.00 [ 0.880043@3] pps_core: LinuxPPS API ver. 1 registered [ 0.885095@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.894480@3] PTP clock support registered [ 0.899037@3] dmi: Firmware registration failed. [ 0.903639@3] secmon: reserve_mem_size:0x300000 [ 0.907828@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.914740@3] secmon: get page:ffffffbf00140000, 5000 [ 0.919476@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.927876@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.934602@3] fb: osd_init_module [ 0.939046@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.944669@3] Bluetooth: Core ver 2.22 [ 0.947786@3] NET: Registered protocol family 31 [ 0.952385@3] Bluetooth: HCI device and connection manager initialized [ 0.958945@3] Bluetooth: HCI socket layer initialized [ 0.964005@3] Bluetooth: L2CAP socket layer initialized [ 0.969298@3] Bluetooth: SCO socket layer initialized [ 0.982380@3] NetLabel: Initializing [ 0.982414@3] NetLabel: domain hash size = 128 [ 0.984856@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.990120@3] NetLabel: unlabeled traffic allowed by default [ 0.997510@1] clocksource: Switched to clocksource arch_sys_counter [ 1.098125@1] VFS: Disk quotas dquot_6.6.0 [ 1.098233@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.117446@0] NET: Registered protocol family 2 [ 1.118205@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.123703@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.130324@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.136948@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.142883@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.149550@0] NET: Registered protocol family 1 [ 1.154377@0] RPC: Registered named UNIX socket transport module. [ 1.160027@0] RPC: Registered udp transport module. [ 1.164906@0] RPC: Registered tcp transport module. [ 1.169816@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.177914@0] Unpacking initramfs... [ 1.279243@0] Freeing initrd memory: 2308K [ 1.280662@0] hw perfevents: clusterb_enabled = 0 [ 1.282494@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.286929@0] hw perfevents: cluster A irq = 7 [ 1.291492@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.300842@0] audit: initializing netlink subsys (disabled) [ 1.305006@0] audit: type=2000 audit(1.148:1): initialized [ 1.311641@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.332488@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.338513@0] NFS: Registering the id_resolver key type [ 1.338578@0] Key type id_resolver registered [ 1.342523@0] Key type id_legacy registered [ 1.347023@0] fuse init (API version 7.26) [ 1.355567@0] NET: Registered protocol family 38 [ 1.355619@0] Key type asymmetric registered [ 1.359753@0] Asymmetric key parser 'x509' registered [ 1.365092@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.372472@0] io scheduler noop registered (default) [ 1.377418@0] io scheduler deadline registered [ 1.382130@0] io scheduler cfq registered [ 1.396757@3] random: fast init done [ 1.396824@3] random: crng init done [ 1.397335@0] Unable to detect cache hierarchy for CPU 0 [ 1.433633@0] loop: module loaded [ 1.438626@0] zram: Added device: zram0 [ 1.439022@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.444270@0] libphy: Fixed MDIO Bus: probed [ 1.449097@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.453032@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.460759@0] PPP generic driver version 2.4.2 [ 1.464146@0] PPP BSD Compression module registered [ 1.468779@0] PPP Deflate Compression module registered [ 1.474028@0] PPP MPPE Compression module registered [ 1.479000@0] NET: Registered protocol family 24 [ 1.483774@0] usbcore: registered new interface driver asix [ 1.489374@0] usbcore: registered new interface driver ax88179_178a [ 1.495633@0] usbcore: registered new interface driver cdc_ether [ 1.501659@0] usbcore: registered new interface driver net1080 [ 1.507514@0] usbcore: registered new interface driver cdc_subset [ 1.513645@0] usbcore: registered new interface driver zaurus [ 1.519444@0] usbcore: registered new interface driver cdc_ncm [ 1.525908@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.531953@0] ehci-pci: EHCI PCI platform driver [ 1.536688@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.543001@0] ohci-pci: OHCI PCI platform driver [ 1.548188@0] usbcore: registered new interface driver cdc_acm [ 1.553481@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.561805@0] usbcore: registered new interface driver usb-storage [ 1.568050@0] usbcore: registered new interface driver usbserial [ 1.574512@1] mousedev: PS/2 mouse device common for all mice [ 1.580196@1] usbcore: registered new interface driver xpad [ 1.585602@0] i2c /dev entries driver [ 1.589134@0] usbcore: registered new interface driver uvcvideo [ 1.594959@0] USB Video Class driver (1.1.1) [ 1.599246@0] md: linear personality registered for level -1 [ 1.605415@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.615055@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.620882@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.628614@3] usbcore: registered new interface driver usbhid [ 1.632593@3] usbhid: USB HID core driver [ 1.636850@3] ashmem: initialized [ 1.640309@3] logger: created 512K log 'log_main' [ 1.644836@3] logger: created 1K log 'log_events' [ 1.649774@3] logger: created 1K log 'log_radio' [ 1.654237@2] logger: created 16K log 'log_system' [ 1.658835@2] exFAT: Version 1.3.0 [ 1.663601@2] ff803000.serial: clock gate not found [ 1.667219@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.674373@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.689337@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.691951@2] console [ttyS0] enabled [ 1.691951@2] console [ttyS0] enabled [ 1.699178@2] bootconsole [aml_uart0] disabled [ 1.699178@2] bootconsole [aml_uart0] disabled [ 1.708639@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.715085@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.725400@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.735189@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.741692@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.754136@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.758176@1] irq = 20 [ 1.760505@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.769323@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.773788@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.778969@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.785429@1] meson-remote: Driver init [ 1.789390@1] meson-remote: remote_probe [ 1.792995@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.798073@1] meson-remote ff808040.rc: don't find the node [ 1.804613@1] meson-remote ff808040.rc: led_blink = 0 [ 1.809616@1] meson-remote ff808040.rc: don't find the node [ 1.816523@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.822158@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.827862@1] meson-remote ff808040.rc: custom_number = 3 [ 1.833176@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.838861@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.846014@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.852315@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.858463@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.864128@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.871285@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.877581@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.883726@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.889398@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.896556@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.902852@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.908981@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.915704@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.921480@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.927260@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.932952@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.938645@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.944596@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.950461@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.956067@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.961415@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.966762@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.972821@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.979759@0] meson-remote: IR XMP protocol handler initialized [ 1.985434@0] efusekeynum: 4 [ 1.987943@0] efusekeyname: mac offset: 0 size: 6 [ 1.994298@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.000670@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.007054@0] efusekeyname: usid offset: 18 size: 16 [ 2.013739@1] efuse efuse: probe OK! [ 2.019266@0] ge2d: ge2d_init_module [ 2.021002@0] [tsync_pcr_init]init success. [ 2.025626@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.032011@0] DI: di_module_init ok. [ 2.035159@0] dim:dim_module_init [ 2.038472@0] dim:dim_module_init finish [ 2.042077@0] dil:dil_init. [ 2.045021@0] dil:dil_init ok. [ 2.047902@0] vdin_drv_init: major 241 [ 2.051806@0] vdin_drv_init: vdin driver init done [ 2.056306@0] [viuin..]viuin_init_module viuin module init [ 2.062132@0] [viuin..]viuin_probe probe ok. [ 2.066214@0] amlvid:info: amlvideo_init called[ 2.070280@0] amlvid:info: amlvideo_create_instance called [ 2.075704@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.081073@3] amlvideo-000: V4L2 device registered as video10 [ 2.086499@3] amlvid:info: amlvideo_create_instance called [ 2.091924@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.097257@1] amlvideo-001: V4L2 device registered as video23 [ 2.103011@1] PPMGRDRV: warn: ppmgr module init func called [ 2.109164@2] videosync_create_instance dev_s ffffffc01c924c00,dev_s->dev ffffffc01c985080 [ 2.116440@2] videosync_create_instance reg videosync.0 [ 2.121693@2] aml_vecm_init:module init [ 2.121700@1] videosync_thread started [ 2.129441@2] amdolby_vision_init:module init [ 2.133718@2] prime_sl module init [ 2.137283@2] amlogic mtd driver init [ 2.141039@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.146255@2] bl mode descrete [ 2.149173@2] fip_copies 4 [ 2.151859@2] fip_size 0x200000 [ 2.154963@2] nand_clk_ctrl 0xffe07000 [ 2.158668@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.164299@2] nand_clk_ctrl 0xffe07000 [ 2.167999@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.176317@2] plat->aml_nand_device ffffff800a778cf8 [ 2.180841@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.186824@2] NAND device id: c2 dc 90 a2 57 3 [ 2.191019@2] NAND device: Manufacturer ID: [ 2.195068@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.201727@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.207226@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.212748@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.219052@2] mtd->oobavail: 0x10 [ 2.222652@0] aml_nand_init 2119: plat-name:bootloader [ 2.227434@0] Creating 1 MTD partitions on "bootloader": [ 2.232685@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.240277@1] bootloader initialized ok [ 2.241929@1] plat->aml_nand_device ffffff800a778cf8 [ 2.246828@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.252860@1] NAND device id: c2 dc 90 a2 57 3 [ 2.257004@1] NAND device: Manufacturer ID: [ 2.261049@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.267706@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.273214@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.278730@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.285037@1] mtd->oobavail: 0x10 [ 2.288514@1] aml_nand_init 2119: plat-name:nandnormal [ 2.293417@1] bbt_start=20 [ 2.296064@1] env_start=24 [ 2.298737@1] key_start=32 [ 2.301403@1] dtb_start=40 [ 2.304084@1] ddr_start=44 [ 2.306760@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.313236@1] get_free_node 43: bitmap=0 [ 2.316679@1] get_free_node 55: bitmap=1 [ 2.320763@1] get_free_node 43: bitmap=1 [ 2.324441@1] get_free_node 55: bitmap=3 [ 2.328525@1] get_free_node 43: bitmap=3 [ 2.332203@1] get_free_node 55: bitmap=7 [ 2.336085@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.342725@1] nbbt free list: [ 2.345657@1] blockN=21, ec=-1, dirty_flag=0 [ 2.349883@1] blockN=22, ec=-1, dirty_flag=0 [ 2.354110@1] blockN=23, ec=-1, dirty_flag=0 [ 2.358337@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.363745@1] nbbt valid addr: 500000 [ 2.366963@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.372568@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.378809@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.385220@1] get_free_node 43: bitmap=7 [ 2.388697@1] get_free_node 55: bitmap=f [ 2.392781@1] get_free_node 43: bitmap=f [ 2.396460@1] get_free_node 55: bitmap=1f [ 2.400629@1] get_free_node 43: bitmap=1f [ 2.404394@1] get_free_node 55: bitmap=3f [ 2.408564@1] get_free_node 43: bitmap=3f [ 2.412330@1] get_free_node 55: bitmap=7f [ 2.416499@1] get_free_node 43: bitmap=7f [ 2.420264@1] get_free_node 55: bitmap=ff [ 2.424434@1] get_free_node 43: bitmap=ff [ 2.428199@1] get_free_node 55: bitmap=1ff [ 2.432455@1] get_free_node 43: bitmap=1ff [ 2.436306@1] get_free_node 55: bitmap=3ff [ 2.440361@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.447000@1] nenv free list: [ 2.449933@1] blockN=25, ec=-1, dirty_flag=0 [ 2.454160@1] blockN=26, ec=-1, dirty_flag=0 [ 2.458386@1] blockN=27, ec=-1, dirty_flag=0 [ 2.462612@1] blockN=28, ec=-1, dirty_flag=0 [ 2.466838@1] blockN=29, ec=-1, dirty_flag=0 [ 2.471064@1] blockN=30, ec=-1, dirty_flag=0 [ 2.475291@1] blockN=31, ec=-1, dirty_flag=0 [ 2.479517@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.491255@1] nenv valid addr: 610000 [ 2.491275@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.495703@1] get_free_node 43: bitmap=3ff [ 2.499554@1] get_free_node 55: bitmap=7ff [ 2.503810@1] get_free_node 43: bitmap=7ff [ 2.507661@1] get_free_node 55: bitmap=fff [ 2.511923@1] get_free_node 43: bitmap=fff [ 2.515769@1] get_free_node 55: bitmap=1fff [ 2.520111@1] get_free_node 43: bitmap=1fff [ 2.524049@1] get_free_node 55: bitmap=3fff [ 2.528391@1] get_free_node 43: bitmap=3fff [ 2.532329@1] get_free_node 55: bitmap=7fff [ 2.536671@1] get_free_node 43: bitmap=7fff [ 2.540609@1] get_free_node 55: bitmap=ffff [ 2.544951@1] get_free_node 43: bitmap=ffff [ 2.548889@1] get_free_node 55: bitmap=1ffff [ 2.553318@1] get_free_node 43: bitmap=1ffff [ 2.557341@1] get_free_node 55: bitmap=3ffff [ 2.561567@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.568206@1] nkey free list: [ 2.571141@1] blockN=32, ec=-1, dirty_flag=0 [ 2.575367@1] blockN=33, ec=-1, dirty_flag=0 [ 2.579593@1] blockN=34, ec=-1, dirty_flag=0 [ 2.583819@1] blockN=35, ec=-1, dirty_flag=0 [ 2.588045@1] blockN=36, ec=-1, dirty_flag=0 [ 2.592272@1] blockN=37, ec=-1, dirty_flag=0 [ 2.596498@1] blockN=38, ec=-1, dirty_flag=0 [ 2.600724@1] blockN=39, ec=-1, dirty_flag=0 [ 2.604951@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.610040@1] nkey valid addr: fffffffffffc0000 [ 2.614524@1] aml_nand_key_check 1251 NO key exist [ 2.619269@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.625892@1] get_free_node 43: bitmap=3ffff [ 2.629706@1] get_free_node 55: bitmap=7ffff [ 2.634134@1] get_free_node 43: bitmap=7ffff [ 2.638156@1] get_free_node 55: bitmap=fffff [ 2.642586@1] get_free_node 43: bitmap=fffff [ 2.646625@1] get_free_node 55: bitmap=1fffff [ 2.650923@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.657563@1] ndtb free list: [ 2.660488@1] blockN=41, ec=-1, dirty_flag=0 [ 2.664722@1] blockN=42, ec=-1, dirty_flag=0 [ 2.668948@1] blockN=43, ec=-1, dirty_flag=0 [ 2.673174@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.691165@1] ndtb valid addr: a00000 [ 2.691185@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.695613@1] get_free_node 43: bitmap=1fffff [ 2.699723@1] get_free_node 55: bitmap=3fffff [ 2.704237@1] get_free_node 43: bitmap=3fffff [ 2.708348@1] get_free_node 55: bitmap=7fffff [ 2.712660@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.719301@1] nddr free list: [ 2.722233@1] blockN=44, ec=-1, dirty_flag=0 [ 2.726459@1] blockN=45, ec=-1, dirty_flag=0 [ 2.730686@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.735774@1] nddr valid addr: fffffffffffc0000 [ 2.740260@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.745006@1] tpl: off 16777216, size 8388608 [ 2.811271@1] Creating 7 MTD partitions on "nandnormal": [ 2.811301@1] 0x000001000000-0x000001800000 : "tpl" [ 2.818306@2] 0x000001800000-0x000001a00000 : "misc" [ 2.822166@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.827048@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.834112@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.838851@2] 0x000003b00000-0x000015300000 : "system" [ 2.877770@2] 0x000015300000-0x000020000000 : "data" [ 2.900957@2] nandnormal initialized ok [ 2.901037@2] aml_ubootenv_init: register env chardev [ 2.904404@2] aml_ubootenv_init: register env chardev OK [ 2.909640@2] amlnf_dtb_init: register dtb cdev [ 2.914140@2] amlnf_dtb_init: register dtd cdev OK [ 2.918698@2] mtd_nand_probe 267 , err = 0 [ 2.923444@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.929024@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.935853@2] unifykey: storage in base: 0xffffffc005000000 [ 2.940781@2] unifykey: storage out base: 0xffffffc005040000 [ 2.946357@2] unifykey: storage block base: 0xffffffc005080000 [ 2.952136@2] unifykey: probe done! [ 2.956016@2] unifykey: no efuse-version set, use default value: -1 [ 2.961813@2] unifykey: key unify config unifykey-num is 6 [ 2.967268@2] unifykey: key unify fact unifykey-num is 6 [ 2.972495@2] unifykey: unifykey_devno: ee00000 [ 2.977256@2] unifykey: device unifykeys created ok [ 2.981888@2] unifykey: aml_unifykeys_init done! [ 2.986669@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.993002@2] amlkaraoke init success! [ 2.996158@2] sysled: module init [ 2.999601@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.004511@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.011637@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.018170@2] amlogic rfkill init [ 3.022809@2] dmc_monitor_probe [ 3.024548@2] page_trace_module_init, create sysfs failed [ 3.030215@2] defendkey defendkey: Reserved memory is not enough! [ 3.035748@2] defendkey: probe of defendkey failed with error -22 [ 3.042723@2] usbcore: registered new interface driver snd-usb-audio [ 3.051883@2] asoc debug: aml_audio_controller_probe-130 [ 3.053896@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.059153@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.066928@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.074103@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.080476@2] aml_tdm_platform_probe(), share en = 1[ 3.085219@2] No channel mask node Channel_Mask [ 3.090006@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.095541@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.103506@2] aml_tdm_platform_probe(), share en = 1[ 3.108001@2] No channel mask node Channel_Mask [ 3.112738@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.118302@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.126256@2] aml_tdm_platform_probe(), share en = 1[ 3.130763@2] No channel mask node Channel_Mask [ 3.136361@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.143417@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.151498@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.161332@3] Register vad [ 3.162593@3] check whether to update sound card init data [ 3.168389@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.175370@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.182688@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.188315@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.195970@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.203293@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.209170@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.215661@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.222839@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.228713@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.235578@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.241410@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.248139@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.256698@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.263022@1] snd_card_add_kcontrols card:ffffffc01ca00818 [ 3.268017@1] effect_v2 is not init [ 3.271442@1] Failed to add VAD controls [ 3.275696@1] GACT probability NOT on [ 3.278967@1] Mirror/redirect action on [ 3.282737@1] u32 classifier [ 3.285575@1] Actions configured [ 3.289109@1] Netfilter messages via NETLINK v0.30. [ 3.294199@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.300390@1] ctnetlink v0.93: registering with nfnetlink. [ 3.306124@3] xt_time: kernel timezone is -0000 [ 3.310087@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.316277@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.321336@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.326877@3] Initializing XFRM netlink socket [ 3.331871@3] NET: Registered protocol family 10 [ 3.337013@3] mip6: Mobile IPv6 [ 3.338934@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.344731@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.351760@3] NET: Registered protocol family 17 [ 3.355078@3] NET: Registered protocol family 15 [ 3.359633@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.372731@3] Bluetooth: RFCOMM TTY layer initialized [ 3.377623@3] Bluetooth: RFCOMM socket layer initialized [ 3.382904@3] Bluetooth: RFCOMM ver 1.11 [ 3.386757@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.392185@3] Bluetooth: BNEP filters: protocol multicast [ 3.397536@3] Bluetooth: BNEP socket layer initialized [ 3.402623@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.408662@3] Bluetooth: HIDP socket layer initialized [ 3.413864@3] l2tp_core: L2TP core driver, V2.0 [ 3.418250@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.423146@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.428872@3] l2tp_netlink: L2TP netlink interface [ 3.433631@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.439658@3] l2tp_debugfs: L2TP debugfs support [ 3.444191@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.450806@3] NET: Registered protocol family 35 [ 3.455558@3] Key type dns_resolver registered [ 3.460740@3] Registered swp emulation handler [ 3.464144@3] Registered cp15_barrier emulation handler [ 3.469298@3] Registered setend emulation handler [ 3.474010@3] disable EAS feature [ 3.478366@1] registered taskstats version 1 [ 3.490873@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.997064@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.997121@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.005258@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.013739@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.020611@2] hub 1-0:1.0: USB hub found [ 4.023683@2] hub 1-0:1.0: 1 port detected [ 4.027979@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.033249@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.041068@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.049983@3] hub 2-0:1.0: USB hub found [ 4.053107@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.060450@3] usb usb2: Unsupported the hub [ 4.064895@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.072978@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.181526@3] dwc_otg: Core Release: 3.10a [ 4.181639@3] dwc_otg: Setting default values for core params [ 4.185715@3] dwc_otg: curmode: 0, host_only: 0 [ 4.202515@3] dwc_otg: Using Buffer DMA mode [ 4.202537@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.206415@3] dwc_otg: Working on port type = SLAVE [ 4.211248@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.218498@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.227422@3] gxbb_pm: enter meson_pm_probe! [ 4.227461@3] no vddio3v3_en pin[ 4.229099@3] pm-meson aml_pm: Can't get switch_clk81 [ 4.234165@3] gxbb_pm: meson_pm_probe done [ 4.23851W 4.244806@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.250226@3] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.459513@0] ubi0: attaching mtd6 [ 4.987744@0] ubi0: scanning is finished [ 4.991898@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.992185@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.999195@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.006082@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.013147@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.019357@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.026688@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.035921@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.045330@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.051185@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.095968@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.097936@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.107908@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.118684@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.124637@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.318918@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.377573@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.462808@2] ubi1: attaching mtd7 [ 5.789230@2] ubi1: scanning is finished [ 5.793164@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.793275@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.800284@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.807170@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.814237@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.820365@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.827693@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.836925@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.846245@1] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.855691@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.879450@3] UBIFS (ubi1:0): recovery needed [ 5.965824@0] UBIFS (ubi1:0): recovery completed [ 5.965983@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.972164@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.982220@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.992855@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.999583@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2ad1450 --- 0 OK [ 7.031410@3] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 7.042621@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.042659@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.049787@3] aml_tdm_open [ 7.050846@3] Not init audio effects Opened TCP tuning interface on port 15002: Waiting [ 7.059478@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.064509@0] cpufreq_interactive: no need to active hmp boost! for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.148188@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.151859@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B The layo[ 7.158275@3] asoc-aml-card auge_sound: tdm capture enable ut /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.207456@3] asoc-aml-card auge_sound: tdm playback enable [ 7.274789@0] aml_tdm_ddr_isr(), reset tdmin, jiffies:4294894077 [ 7.275185@0] asoc-aml-card auge_sound: tdm capture stop [ 7.280591@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.286013@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.291951@3] asoc-aml-card auge_sound: tdm capture enable [ 7.303710@1] asoc-aml-card auge_sound: tdm playback stop [ 7.350438@3] asoc-aml-card auge_sound: tdm playback enable [ 8.609749@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.331333@1] asoc-aml-card auge_sound: tdm playback stop [ 13.331645@1] asoc-aml-card auge_sound: tdm capture stop [ 13.336690@1] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.327200@2] mtd_nand_reboot_notifier 35 [ 15.327465@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.335471@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.339934@2] usb usb2: USB disconnect, device number 1 [ 15.346466@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.349801@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.354979@1] usb usb1: USB disconnect, device number 1 [ 15.361952@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.381543@0] reboot: Restarting system [ 15.381696@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22026 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015882 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975160 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016846@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129129@0] ftrace: allocating 43519 entries in 170 pages [ 0.209551@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210360@0] CPU0: update cpu_capacity 1024 [ 0.214688@0] ASID allocator initialised with 32768 entries [ 0.252660@0] secmon: can't fine clear_range [ 0.253254@0] EFI services will not be available. [ 0.256096@0] Meson chip version = RevC (25:C - 43:0) [ 0.290024@1] Detected VIPT I-cache on CPU1 [ 0.290085@1] CPU1: update cpu_capacity 1024 [ 0.290087@1] CPU1: Booted secondary processor [410fd034] [ 0.318078@2] Detected VIPT I-cache on CPU2 [ 0.318130@2] CPU2: update cpu_capacity 1024 [ 0.318133@2] CPU2: Booted secondary processor [410fd034] [ 0.346144@3] Detected VIPT I-cache on CPU3 [ 0.346190@3] CPU3: update cpu_capacity 1024 [ 0.346193@3] CPU3: Booted secondary processor [410fd034] [ 0.346285@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390417@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407412@0] CPU: All CPU(s) started at EL2 [ 0.408193@0] alternatives: patching kernel code [ 0.413599@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420732@0] devtmpfs: initialized [ 0.436173@0] DMI not present or invalid. [ 0.436557@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444554@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451111@0] pinctrl core: initialized pinctrl subsystem [ 0.457725@0] NET: Registered protocol family 16 [ 0.481058@0] cpuidle: using governor menu [ 0.481206@0] register canvas platform driver [ 0.483928@0] register rdma platform driver [ 0.489377@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495751@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503227@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509359@0] clkmsr: clkmsr: driver init [ 0.513058@0] codec_mm_module_init [ 0.516495@0] media_configs_system_init [ 0.520634@0] aml_watch_point_probe, in, wp:2 [ 0.526153@0] pstore: using zlib compression [ 0.529557@0] console [pstore-1] enabled [ 0.532885@0] pstore: Registered ramoops as persistent store backend [ 0.539298@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553331@0] aml_iomap: amlogic iomap probe done [ 0.558020@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559927@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568881@0] audio_clocks: audio_clocks_probe done [ 0.577491@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577547@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582712@0] amlogic auge_snd_iomap probe done [ 0.862494@0] vgaarb: loaded [ 0.862864@0] SCSI subsystem initialized [ 0.863930@0] usbcore: registered new interface driver usbfs [ 0.869441@0] usbcore: registered new interface driver hub [ 0.875276@0] usbcore: registered new device driver usb [ 0.880316@0] Linux video capture interface: v2.00 [ 0.885037@0] pps_core: LinuxPPS API ver. 1 registered [ 0.890106@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.899520@0] PTP clock support registered [ 0.907833@0] dmi: Firmware registration failed. [ 0.908624@0] secmon: reserve_mem_size:0x300000 [ 0.912844@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.919772@0] secmon: get page:ffffffbf00140000, 5000 [ 0.924489@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932880@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.939620@0] fb: osd_init_module [ 0.944101@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.949711@0] Bluetooth: Core ver 2.22 [ 0.952803@0] NET: Registered protocol family 31 [ 0.957402@0] Bluetooth: HCI device and connection manager initialized [ 0.963952@0] Bluetooth: HCI socket layer initialized [ 0.969019@0] Bluetooth: L2CAP socket layer initialized [ 0.974339@0] Bluetooth: SCO socket layer initialized [ 0.983397@0] NetLabel: Initializing [ 0.983429@0] NetLabel: domain hash size = 128 [ 0.987482@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.992709@0] NetLabel: unlabeled traffic allowed by default [ 1.000119@1] clocksource: Switched to clocksource arch_sys_counter [ 1.100636@1] VFS: Disk quotas dquot_6.6.0 [ 1.100744@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.120000@1] NET: Registered protocol family 2 [ 1.120769@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.126241@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.132891@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.139506@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.145437@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.152096@1] NET: Registered protocol family 1 [ 1.156915@1] RPC: Registered named UNIX socket transport module. [ 1.162575@1] RPC: Registered udp transport module. [ 1.167460@1] RPC: Registered tcp transport module. [ 1.172360@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.180515@1] Unpacking initramfs... [ 1.281892@1] Freeing initrd memory: 2308K [ 1.283307@1] hw perfevents: clusterb_enabled = 0 [ 1.285148@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.289579@1] hw perfevents: cluster A irq = 7 [ 1.294145@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.303476@1] audit: initializing netlink subsys (disabled) [ 1.307659@1] audit: type=2000 audit(1.076:1): initialized [ 1.314315@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.331157@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.337178@1] NFS: Registering the id_resolver key type [ 1.337244@1] Key type id_resolver registered [ 1.341191@1] Key type id_legacy registered [ 1.345672@1] fuse init (API version 7.26) [ 1.354224@1] NET: Registered protocol family 38 [ 1.354269@1] Key type asymmetric registered [ 1.358425@1] Asymmetric key parser 'x509' registered [ 1.363770@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.371141@1] io scheduler noop registered (default) [ 1.376083@1] io scheduler deadline registered [ 1.380815@1] io scheduler cfq registered [ 1.395452@3] random: fast init done [ 1.395521@3] random: crng init done [ 1.396030@1] Unable to detect cache hierarchy for CPU 0 [ 1.419993@1] loop: module loaded [ 1.420983@1] zram: Added device: zram0 [ 1.421888@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.429211@1] libphy: Fixed MDIO Bus: probed [ 1.432923@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.437745@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.445322@1] PPP generic driver version 2.4.2 [ 1.448850@1] PPP BSD Compression module registered [ 1.453468@1] PPP Deflate Compression module registered [ 1.458722@1] PPP MPPE Compression module registered [ 1.463687@1] NET: Registered protocol family 24 [ 1.468463@1] usbcore: registered new interface driver asix [ 1.474067@1] usbcore: registered new interface driver ax88179_178a [ 1.480322@1] usbcore: registered new interface driver cdc_ether [ 1.486354@1] usbcore: registered new interface driver net1080 [ 1.492209@1] usbcore: registered new interface driver cdc_subset [ 1.498330@1] usbcore: registered new interface driver zaurus [ 1.504142@1] usbcore: registered new interface driver cdc_ncm [ 1.510551@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.516650@1] ehci-pci: EHCI PCI platform driver [ 1.521372@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.527695@1] ohci-pci: OHCI PCI platform driver [ 1.532890@1] usbcore: registered new interface driver cdc_acm [ 1.538178@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.546488@1] usbcore: registered new interface driver usb-storage [ 1.552751@1] usbcore: registered new interface driver usbserial [ 1.559240@1] mousedev: PS/2 mouse device common for all mice [ 1.564809@1] usbcore: registered new interface driver xpad [ 1.570239@1] i2c /dev entries driver [ 1.573873@1] usbcore: registered new interface driver uvcvideo [ 1.579639@1] USB Video Class driver (1.1.1) [ 1.583918@1] md: linear personality registered for level -1 [ 1.590107@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.599761@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.605580@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.613389@2] usbcore: registered new interface driver usbhid [ 1.617296@2] usbhid: USB HID core driver [ 1.621535@0] ashmem: initialized [ 1.625005@2] logger: created 512K log 'log_main' [ 1.629543@0] logger: created 1K log 'log_events' [ 1.634258@2] logger: created 1K log 'log_radio' [ 1.638917@0] logger: created 16K log 'log_system' [ 1.643520@0] exFAT: Version 1.3.0 [ 1.648243@3] ff803000.serial: clock gate not found [ 1.651855@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.659060@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.674025@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.676615@3] console [ttyS0] enabled [ 1.676615@3] console [ttyS0] enabled [ 1.683817@3] bootconsole [aml_uart0] disabled [ 1.683817@3] bootconsole [aml_uart0] disabled [ 1.693316@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.699770@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.710079@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.719872@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.726374@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.738826@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.742867@0] irq = 20 [ 1.745213@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.753993@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.758446@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.763657@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.770117@0] meson-remote: Driver init [ 1.774076@0] meson-remote: remote_probe [ 1.777694@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.782758@0] meson-remote ff808040.rc: don't find the node [ 1.789307@0] meson-remote ff808040.rc: led_blink = 0 [ 1.794304@0] meson-remote ff808040.rc: don't find the node [ 1.801207@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.806847@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.812549@0] meson-remote ff808040.rc: custom_number = 3 [ 1.817868@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.823545@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.830701@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.837001@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.843150@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.848816@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.855972@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.862268@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.868412@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.874085@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.881243@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.887539@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.893668@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.900391@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.906169@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.911947@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.917640@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.923332@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.929283@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.935148@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.940755@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.946107@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.951450@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.957514@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.964555@3] meson-remote: IR XMP protocol handler initialized [ 1.970132@3] efusekeynum: 4 [ 1.972629@3] efusekeyname: mac offset: 0 size: 6 [ 1.978982@3] efusekeyname: mac_bt offset: 6 size: 6 [ 1.985358@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.991742@3] efusekeyname: usid offset: 18 size: 16 [ 1.998383@1] efuse efuse: probe OK! [ 2.004051@3] ge2d: ge2d_init_module [ 2.005748@3] [tsync_pcr_init]init success. [ 2.010257@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.016701@1] DI: di_module_init ok. [ 2.019781@1] dim:dim_module_init [ 2.023109@1] dim:dim_module_init finish [ 2.026767@1] dil:dil_init. [ 2.029753@1] dil:dil_init ok. [ 2.032595@1] vdin_drv_init: major 241 [ 2.036507@1] vdin_drv_init: vdin driver init done [ 2.040999@1] [viuin..]viuin_init_module viuin module init [ 2.046810@1] [viuin..]viuin_probe probe ok. [ 2.050917@1] amlvid:info: amlvideo_init called[ 2.054973@1] amlvid:info: amlvideo_create_instance called [ 2.060388@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.065755@3] amlvideo-000: V4L2 device registered as video10 [ 2.071207@3] amlvid:info: amlvideo_create_instance called [ 2.076608@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.081925@0] amlvideo-001: V4L2 device registered as video23 [ 2.087684@0] PPMGRDRV: warn: ppmgr module init func called [ 2.093927@0] videosync_create_instance dev_s ffffffc01c9ca400,dev_s->dev ffffffc01c991500 [ 2.101128@0] videosync_create_instance reg videosync.0 [ 2.106384@0] aml_vecm_init:module init [ 2.106386@1] videosync_thread started [ 2.114117@0] amdolby_vision_init:module init [ 2.118444@0] prime_sl module init [ 2.122000@0] amlogic mtd driver init [ 2.125724@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.130941@0] bl mode descrete [ 2.133876@0] fip_copies 4 [ 2.136543@0] fip_size 0x200000 [ 2.139639@0] nand_clk_ctrl 0xffe07000 [ 2.143359@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.148986@0] nand_clk_ctrl 0xffe07000 [ 2.152693@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.161024@0] plat->aml_nand_device ffffff800a778cf8 [ 2.165535@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.171511@0] NAND device id: c2 dc 90 a2 57 3 [ 2.175710@0] NAND device: Manufacturer ID: [ 2.179757@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.186416@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.191914@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.197435@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.203737@0] mtd->oobavail: 0x10 [ 2.207349@1] aml_nand_init 2119: plat-name:bootloader [ 2.212128@1] Creating 1 MTD partitions on "bootloader": [ 2.217365@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.225139@1] bootloader initialized ok [ 2.226588@1] plat->aml_nand_device ffffff800a778cf8 [ 2.231528@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.237555@1] NAND device id: c2 dc 90 a2 57 3 [ 2.241688@1] NAND device: Manufacturer ID: [ 2.245736@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.252395@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.257900@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.263417@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.269722@1] mtd->oobavail: 0x10 [ 2.273189@1] aml_nand_init 2119: plat-name:nandnormal [ 2.278122@1] bbt_start=20 [ 2.280753@1] env_start=24 [ 2.283416@1] key_start=32 [ 2.286098@1] dtb_start=40 [ 2.288772@1] ddr_start=44 [ 2.291440@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.297922@1] get_free_node 43: bitmap=0 [ 2.301367@1] get_free_node 55: bitmap=1 [ 2.305450@1] get_free_node 43: bitmap=1 [ 2.309128@1] get_free_node 55: bitmap=3 [ 2.313212@1] get_free_node 43: bitmap=3 [ 2.316890@1] get_free_node 55: bitmap=7 [ 2.320772@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.327412@1] nbbt free list: [ 2.330345@1] blockN=21, ec=-1, dirty_flag=0 [ 2.334571@1] blockN=22, ec=-1, dirty_flag=0 [ 2.338797@1] blockN=23, ec=-1, dirty_flag=0 [ 2.343024@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.348433@1] nbbt valid addr: 500000 [ 2.351642@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.357256@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.363497@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.369908@1] get_free_node 43: bitmap=7 [ 2.373384@1] get_free_node 55: bitmap=f [ 2.377468@1] get_free_node 43: bitmap=f [ 2.381147@1] get_free_node 55: bitmap=1f [ 2.385317@1] get_free_node 43: bitmap=1f [ 2.389081@1] get_free_node 55: bitmap=3f [ 2.393252@1] get_free_node 43: bitmap=3f [ 2.397017@1] get_free_node 55: bitmap=7f [ 2.401187@1] get_free_node 43: bitmap=7f [ 2.404952@1] get_free_node 55: bitmap=ff [ 2.409122@1] get_free_node 43: bitmap=ff [ 2.412897@1] get_free_node 55: bitmap=1ff [ 2.417147@1] get_free_node 43: bitmap=1ff [ 2.420994@1] get_free_node 55: bitmap=3ff [ 2.425047@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.431688@1] nenv free list: [ 2.434621@1] blockN=25, ec=-1, dirty_flag=0 [ 2.438847@1] blockN=26, ec=-1, dirty_flag=0 [ 2.443073@1] blockN=27, ec=-1, dirty_flag=0 [ 2.447299@1] blockN=28, ec=-1, dirty_flag=0 [ 2.451525@1] blockN=29, ec=-1, dirty_flag=0 [ 2.455752@1] blockN=30, ec=-1, dirty_flag=0 [ 2.459978@1] blockN=31, ec=-1, dirty_flag=0 [ 2.464204@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.475951@1] nenv valid addr: 610000 [ 2.475971@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.480400@1] get_free_node 43: bitmap=3ff [ 2.484250@1] get_free_node 55: bitmap=7ff [ 2.488506@1] get_free_node 43: bitmap=7ff [ 2.492358@1] get_free_node 55: bitmap=fff [ 2.496614@1] get_free_node 43: bitmap=fff [ 2.500465@1] get_free_node 55: bitmap=1fff [ 2.504808@1] get_free_node 43: bitmap=1fff [ 2.508745@1] get_free_node 55: bitmap=3fff [ 2.513087@1] get_free_node 43: bitmap=3fff [ 2.517025@1] get_free_node 55: bitmap=7fff [ 2.521368@1] get_free_node 43: bitmap=7fff [ 2.525305@1] get_free_node 55: bitmap=ffff [ 2.529648@1] get_free_node 43: bitmap=ffff [ 2.533585@1] get_free_node 55: bitmap=1ffff [ 2.538014@1] get_free_node 43: bitmap=1ffff [ 2.542037@1] get_free_node 55: bitmap=3ffff [ 2.546263@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.552904@1] nkey free list: [ 2.555829@1] blockN=32, ec=-1, dirty_flag=0 [ 2.560063@1] blockN=33, ec=-1, dirty_flag=0 [ 2.564289@1] blockN=34, ec=-1, dirty_flag=0 [ 2.568515@1] blockN=35, ec=-1, dirty_flag=0 [ 2.572742@1] blockN=36, ec=-1, dirty_flag=0 [ 2.576968@1] blockN=37, ec=-1, dirty_flag=0 [ 2.581194@1] blockN=38, ec=-1, dirty_flag=0 [ 2.585420@1] blockN=39, ec=-1, dirty_flag=0 [ 2.589646@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.594735@1] nkey valid addr: fffffffffffc0000 [ 2.599226@1] aml_nand_key_check 1251 NO key exist [ 2.603965@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.610580@1] get_free_node 43: bitmap=3ffff [ 2.614400@1] get_free_node 55: bitmap=7ffff [ 2.618831@1] get_free_node 43: bitmap=7ffff [ 2.622854@1] get_free_node 55: bitmap=fffff [ 2.627282@1] get_free_node 43: bitmap=fffff [ 2.631315@1] get_free_node 55: bitmap=1fffff [ 2.635620@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.642259@1] ndtb free list: [ 2.645191@1] blockN=41, ec=-1, dirty_flag=0 [ 2.649417@1] blockN=42, ec=-1, dirty_flag=0 [ 2.653644@1] blockN=43, ec=-1, dirty_flag=0 [ 2.657871@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.675859@1] ndtb valid addr: a00000 [ 2.675879@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.680310@1] get_free_node 43: bitmap=1fffff [ 2.684419@1] get_free_node 55: bitmap=3fffff [ 2.688934@1] get_free_node 43: bitmap=3fffff [ 2.693044@1] get_free_node 55: bitmap=7fffff [ 2.697356@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.703996@1] nddr free list: [ 2.706929@1] blockN=44, ec=-1, dirty_flag=0 [ 2.711155@1] blockN=45, ec=-1, dirty_flag=0 [ 2.715382@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.720471@1] nddr valid addr: fffffffffffc0000 [ 2.724956@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.729702@1] tpl: off 16777216, size 8388608 [ 2.795983@1] Creating 7 MTD partitions on "nandnormal": [ 2.796014@1] 0x000001000000-0x000001800000 : "tpl" [ 2.803346@0] 0x000001800000-0x000001a00000 : "misc" [ 2.807307@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.811785@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.818768@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.823515@0] 0x000003b00000-0x000015300000 : "system" [ 2.862624@0] 0x000015300000-0x000020000000 : "data" [ 2.885957@0] nandnormal initialized ok [ 2.886036@0] aml_ubootenv_init: register env chardev [ 2.889402@0] aml_ubootenv_init: register env chardev OK [ 2.894626@0] amlnf_dtb_init: register dtb cdev [ 2.899144@0] amlnf_dtb_init: register dtd cdev OK [ 2.903692@0] mtd_nand_probe 267 , err = 0 [ 2.908440@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.914022@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.920831@0] unifykey: storage in base: 0xffffffc005000000 [ 2.925767@0] unifykey: storage out base: 0xffffffc005040000 [ 2.931358@0] unifykey: storage block base: 0xffffffc005080000 [ 2.937131@0] unifykey: probe done! [ 2.941047@0] unifykey: no efuse-version set, use default value: -1 [ 2.946811@0] unifykey: key unify config unifykey-num is 6 [ 2.952271@0] unifykey: key unify fact unifykey-num is 6 [ 2.957490@0] unifykey: unifykey_devno: ee00000 [ 2.962243@0] unifykey: device unifykeys created ok [ 2.966885@0] unifykey: aml_unifykeys_init done! [ 2.971671@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.978079@0] amlkaraoke init success! [ 2.981147@0] sysled: module init [ 2.984538@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.989504@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.996650@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.003159@0] amlogic rfkill init [ 3.007810@0] dmc_monitor_probe [ 3.009586@0] page_trace_module_init, create sysfs failed [ 3.015207@0] defendkey defendkey: Reserved memory is not enough! [ 3.020743@0] defendkey: probe of defendkey failed with error -22 [ 3.027715@0] usbcore: registered new interface driver snd-usb-audio [ 3.037052@0] asoc debug: aml_audio_controller_probe-130 [ 3.038789@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.044175@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.051946@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.059105@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.065483@0] aml_tdm_platform_probe(), share en = 1[ 3.070217@0] No channel mask node Channel_Mask [ 3.074996@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.080533@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.088500@0] aml_tdm_platform_probe(), share en = 1[ 3.092989@0] No channel mask node Channel_Mask [ 3.097743@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.103303@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.111234@0] aml_tdm_platform_probe(), share en = 1[ 3.115757@0] No channel mask node Channel_Mask [ 3.121361@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.128416@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.136493@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.146432@0] Register vad [ 3.147535@0] check whether to update sound card init data [ 3.153407@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.160369@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.167686@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.173295@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.180968@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.188291@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.194173@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.200653@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.207812@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.213703@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.220605@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.226413@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.233142@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.241658@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.247967@3] snd_card_add_kcontrols card:ffffffc01d805018 [ 3.253011@3] effect_v2 is not init [ 3.256440@3] Failed to add VAD controls [ 3.260689@3] GACT probability NOT on [ 3.263940@3] Mirror/redirect action on [ 3.267757@3] u32 classifier [ 3.270575@3] Actions configured [ 3.274119@3] Netfilter messages via NETLINK v0.30. [ 3.279206@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.285381@3] ctnetlink v0.93: registering with nfnetlink. [ 3.291096@1] xt_time: kernel timezone is -0000 [ 3.295106@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.301307@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.306297@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.311873@1] Initializing XFRM netlink socket [ 3.316856@1] NET: Registered protocol family 10 [ 3.322034@1] mip6: Mobile IPv6 [ 3.323899@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.329732@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.336800@1] NET: Registered protocol family 17 [ 3.340028@1] NET: Registered protocol family 15 [ 3.344647@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.357731@1] Bluetooth: RFCOMM TTY layer initialized [ 3.362617@1] Bluetooth: RFCOMM socket layer initialized [ 3.367899@1] Bluetooth: RFCOMM ver 1.11 [ 3.371757@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.377183@1] Bluetooth: BNEP filters: protocol multicast [ 3.382533@1] Bluetooth: BNEP socket layer initialized [ 3.387619@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.393658@1] Bluetooth: HIDP socket layer initialized [ 3.398825@1] l2tp_core: L2TP core driver, V2.0 [ 3.403243@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.408143@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.413882@1] l2tp_netlink: L2TP netlink interface [ 3.418627@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.424648@1] l2tp_debugfs: L2TP debugfs support [ 3.429189@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.435792@1] NET: Registered protocol family 35 [ 3.440554@1] Key type dns_resolver registered [ 3.445731@1] Registered swp emulation handler [ 3.449140@1] Registered cp15_barrier emulation handler [ 3.454296@1] Registered setend emulation handler [ 3.459007@1] disable EAS feature [ 3.463085@0] registered taskstats version 1 [ 3.475874@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.982120@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.982250@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.990383@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.998801@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.005675@3] hub 1-0:1.0: USB hub found [ 4.008701@3] hub 1-0:1.0: 1 port detected [ 4.013072@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.018311@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.026128@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.035035@0] hub 2-0:1.0: USB hub found [ 4.038238@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.045487@0] usb usb2: Unsupported the hub [ 4.049928@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.058022@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.166457@3] dwc_otg: Core Release: 3.10a [ 4.166552@3] dwc_otg: Setting default values for core params [ 4.170657@3] dwc_otg: curmode: 0, host_only: 0 [ 4.187446@3] dwc_otg: Using Buffer DMA mode [ 4.187469@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.191354@3] dwc_otg: Working on port type = SLAVE [ 4.196186@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.203274@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.212496@0] gxbb_pm: enter meson_pm_probe! [ 4.212535@0] no vddio3v3_en pin[ 4.214175@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.219224@0] gxbb_pm: meson_pm_probe done [ 4.22359[ 4.229868@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.235274@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.443505@2] ubi0: attaching mtd6 [ 4.971766@2] ubi0: scanning is finished [ 4.975902@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.976223@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.983183@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.990081@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.997188@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.003363@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.010699@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.019923@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.029341@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.035200@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.079998@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.081982@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.091938@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.102715@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.108687@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.289601@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.347536@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.433853@0] ubi1: attaching mtd7 [ 5.760173@0] ubi1: scanning is finished [ 5.763936@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.764197@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.771178@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.778061@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.785138@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.791256@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.798592@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.807817@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.817148@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.826359@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.850247@1] UBIFS (ubi1:0): recovery needed [ 5.938281@1] UBIFS (ubi1:0): recovery completed [ 5.938439@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.944615@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.954616@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.965309@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.972039@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f319f450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.999180@3] aml_tdm_open [ 7.009828@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.009865@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.016904@3] aml_tdm_open [ 7.018051@3] Not init audio effects Opened TCP tuning[ 7.024613@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.028734@1] cpufreq_interactive: no need to active hmp boost! interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.115876@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.119568@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.126380@3] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.174729@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.688432@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21933 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 34 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015889 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974741 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021105@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129126@0] ftrace: allocating 43519 entries in 170 pages [ 0.209439@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210256@0] CPU0: update cpu_capacity 1024 [ 0.214581@0] ASID allocator initialised with 32768 entries [ 0.252559@0] secmon: can't fine clear_range [ 0.253138@0] EFI services will not be available. [ 0.255990@0] Meson chip version = RevC (25:C - 43:0) [ 0.289914@1] Detected VIPT I-cache on CPU1 [ 0.289976@1] CPU1: update cpu_capacity 1024 [ 0.289979@1] CPU1: Booted secondary processor [410fd034] [ 0.317947@2] Detected VIPT I-cache on CPU2 [ 0.318000@2] CPU2: update cpu_capacity 1024 [ 0.318002@2] CPU2: Booted secondary processor [410fd034] [ 0.346037@3] Detected VIPT I-cache on CPU3 [ 0.346087@3] CPU3: update cpu_capacity 1024 [ 0.346089@3] CPU3: Booted secondary processor [410fd034] [ 0.346181@0] Brought up 4 CPUs [ 0.385403@0] SMP: Total of 4 processors activated. [ 0.390312@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396348@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407301@0] CPU: All CPU(s) started at EL2 [ 0.408087@0] alternatives: patching kernel code [ 0.413496@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420624@0] devtmpfs: initialized [ 0.436080@0] DMI not present or invalid. [ 0.436463@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444465@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451023@0] pinctrl core: initialized pinctrl subsystem [ 0.457639@0] NET: Registered protocol family 16 [ 0.484918@3] cpuidle: using governor menu [ 0.485068@3] register canvas platform driver [ 0.487783@3] register rdma platform driver [ 0.493235@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499607@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507104@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513157@3] clkmsr: clkmsr: driver init [ 0.516914@3] codec_mm_module_init [ 0.520359@3] media_configs_system_init [ 0.524487@3] aml_watch_point_probe, in, wp:2 [ 0.529151@3] pstore: using zlib compression [ 0.533409@3] console [pstore-1] enabled [ 0.536744@3] pstore: Registered ramoops as persistent store backend [ 0.543150@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557224@0] aml_iomap: amlogic iomap probe done [ 0.561984@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563853@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572830@3] audio_clocks: audio_clocks_probe done [ 0.581441@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581496@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586664@3] amlogic auge_snd_iomap probe done [ 0.873548@1] vgaarb: loaded [ 0.873992@1] SCSI subsystem initialized [ 0.875061@1] usbcore: registered new interface driver usbfs [ 0.880517@1] usbcore: registered new interface driver hub [ 0.886058@1] usbcore: registered new device driver usb [ 0.891319@1] Linux video capture interface: v2.00 [ 0.896092@1] pps_core: LinuxPPS API ver. 1 registered [ 0.901154@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.910550@1] PTP clock support registered [ 0.915032@1] dmi: Firmware registration failed. [ 0.923573@1] secmon: reserve_mem_size:0x300000 [ 0.923864@1] secmon secmon: assigned reserved memory node linux,secmon [ 0.930791@1] secmon: get page:ffffffbf00140000, 5000 [ 0.935539@1] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.943931@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.950661@1] fb: osd_init_module [ 0.955185@1] Advanced Linux Sound Architecture Driver Initialized. [ 0.960731@1] Bluetooth: Core ver 2.22 [ 0.963850@1] NET: Registered protocol family 31 [ 0.968451@1] Bluetooth: HCI device and connection manager initialized [ 0.975003@1] Bluetooth: HCI socket layer initialized [ 0.980073@1] Bluetooth: L2CAP socket layer initialized [ 0.985358@1] Bluetooth: SCO socket layer initialized [ 0.998444@1] NetLabel: Initializing [ 0.998477@1] NetLabel: domain hash size = 128 [ 1.000913@1] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.006165@1] NetLabel: unlabeled traffic allowed by default [ 1.013553@0] clocksource: Switched to clocksource arch_sys_counter [ 1.114174@0] VFS: Disk quotas dquot_6.6.0 [ 1.114269@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.133514@0] NET: Registered protocol family 2 [ 1.134294@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.139734@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.146447@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.152969@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.158941@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.165607@0] NET: Registered protocol family 1 [ 1.170428@0] RPC: Registered named UNIX socket transport module. [ 1.176091@0] RPC: Registered udp transport module. [ 1.180970@0] RPC: Registered tcp transport module. [ 1.185869@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.193988@0] Unpacking initramfs... [ 1.295336@0] Freeing initrd memory: 2308K [ 1.296730@0] hw perfevents: clusterb_enabled = 0 [ 1.298587@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.303019@0] hw perfevents: cluster A irq = 7 [ 1.307585@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.316965@0] audit: initializing netlink subsys (disabled) [ 1.321101@0] audit: type=2000 audit(1.164:1): initialized [ 1.327720@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.348673@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.354683@0] NFS: Registering the id_resolver key type [ 1.354752@0] Key type id_resolver registered [ 1.358704@0] Key type id_legacy registered [ 1.363214@0] fuse init (API version 7.26) [ 1.371875@0] NET: Registered protocol family 38 [ 1.371920@0] Key type asymmetric registered [ 1.375944@0] Asymmetric key parser 'x509' registered [ 1.381284@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.388658@0] io scheduler noop registered (default) [ 1.393606@0] io scheduler deadline registered [ 1.398333@0] io scheduler cfq registered [ 1.412962@1] random: fast init done [ 1.413030@1] random: crng init done [ 1.413611@0] Unable to detect cache hierarchy for CPU 0 [ 1.441755@0] loop: module loaded [ 1.442757@0] zram: Added device: zram0 [ 1.443636@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.451110@0] libphy: Fixed MDIO Bus: probed [ 1.454735@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.459493@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.467052@0] PPP generic driver version 2.4.2 [ 1.470613@0] PPP BSD Compression module registered [ 1.475240@0] PPP Deflate Compression module registered [ 1.480487@0] PPP MPPE Compression module registered [ 1.485462@0] NET: Registered protocol family 24 [ 1.490230@0] usbcore: registered new interface driver asix [ 1.495823@0] usbcore: registered new interface driver ax88179_178a [ 1.502098@0] usbcore: registered new interface driver cdc_ether [ 1.508119@0] usbcore: registered new interface driver net1080 [ 1.513971@0] usbcore: registered new interface driver cdc_subset [ 1.520100@0] usbcore: registered new interface driver zaurus [ 1.525893@0] usbcore: registered new interface driver cdc_ncm [ 1.532351@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.538413@0] ehci-pci: EHCI PCI platform driver [ 1.543150@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.549456@0] ohci-pci: OHCI PCI platform driver [ 1.554660@0] usbcore: registered new interface driver cdc_acm [ 1.559939@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.568260@0] usbcore: registered new interface driver usb-storage [ 1.574510@0] usbcore: registered new interface driver usbserial [ 1.581003@0] mousedev: PS/2 mouse device common for all mice [ 1.586566@0] usbcore: registered new interface driver xpad [ 1.592012@0] i2c /dev entries driver [ 1.595615@0] usbcore: registered new interface driver uvcvideo [ 1.601402@0] USB Video Class driver (1.1.1) [ 1.605682@0] md: linear personality registered for level -1 [ 1.611871@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.621493@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.627375@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.635167@2] usbcore: registered new interface driver usbhid [ 1.639044@2] usbhid: USB HID core driver [ 1.643310@3] ashmem: initialized [ 1.646808@2] logger: created 512K log 'log_main' [ 1.651341@3] logger: created 1K log 'log_events' [ 1.656015@2] logger: created 1K log 'log_radio' [ 1.660673@3] logger: created 16K log 'log_system' [ 1.665291@3] exFAT: Version 1.3.0 [ 1.670018@1] ff803000.serial: clock gate not found [ 1.673681@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.680817@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.695795@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.698391@1] console [ttyS0] enabled [ 1.698391@1] console [ttyS0] enabled [ 1.705594@1] bootconsole [aml_uart0] disabled [ 1.705594@1] bootconsole [aml_uart0] disabled [ 1.715098@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.721544@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.731826@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.741670@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.748151@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.760562@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.764646@0] irq = 20 [ 1.766982@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.775802@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.780231@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.785413@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.791910@0] meson-remote: Driver init [ 1.795873@0] meson-remote: remote_probe [ 1.799465@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.804523@0] meson-remote ff808040.rc: don't find the node [ 1.811073@0] meson-remote ff808040.rc: led_blink = 0 [ 1.816077@0] meson-remote ff808040.rc: don't find the node [ 1.822974@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.828618@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.834314@0] meson-remote ff808040.rc: custom_number = 3 [ 1.839635@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.845314@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.852477@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.858768@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.864914@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.870584@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.877742@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.884038@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.890182@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.895855@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.903013@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.909309@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.915438@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.922160@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.927939@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.933717@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.939410@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.945102@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.951053@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.956918@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.962524@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.967872@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.973219@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.979228@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.986199@0] meson-remote: IR XMP protocol handler initialized [ 1.991870@0] efusekeynum: 4 [ 1.994397@0] efusekeyname: mac offset: 0 size: 6 [ 2.000750@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.007131@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.013507@0] efusekeyname: usid offset: 18 size: 16 [ 2.020146@3] efuse efuse: probe OK! [ 2.025798@1] ge2d: ge2d_init_module [ 2.027484@1] [tsync_pcr_init]init success. [ 2.032001@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.038484@1] DI: di_module_init ok. [ 2.041588@1] dim:dim_module_init [ 2.044851@1] dim:dim_module_init finish [ 2.048549@1] dil:dil_init. [ 2.051505@1] dil:dil_init ok. [ 2.054411@1] vdin_drv_init: major 241 [ 2.058288@1] vdin_drv_init: vdin driver init done [ 2.062769@1] [viuin..]viuin_init_module viuin module init [ 2.068596@1] [viuin..]viuin_probe probe ok. [ 2.072685@1] amlvid:info: amlvideo_init called[ 2.076742@1] amlvid:info: amlvideo_create_instance called [ 2.082156@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.087506@0] amlvideo-000: V4L2 device registered as video10 [ 2.092963@0] amlvid:info: amlvideo_create_instance called [ 2.098378@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.103698@2] amlvideo-001: V4L2 device registered as video23 [ 2.109461@2] PPMGRDRV: warn: ppmgr module init func called [ 2.115638@2] videosync_create_instance dev_s ffffffc01d4a7c00,dev_s->dev ffffffc01da31b80 [ 2.122885@2] videosync_create_instance reg videosync.0 [ 2.128131@2] aml_vecm_init:module init [ 2.128133@3] videosync_thread started [ 2.135868@2] amdolby_vision_init:module init [ 2.140143@2] prime_sl module init [ 2.143774@2] amlogic mtd driver init [ 2.147482@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.152712@2] bl mode descrete [ 2.155643@2] fip_copies 4 [ 2.158316@2] fip_size 0x200000 [ 2.161409@2] nand_clk_ctrl 0xffe07000 [ 2.165127@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.170757@2] nand_clk_ctrl 0xffe07000 [ 2.174456@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.182781@2] plat->aml_nand_device ffffff800a778cf8 [ 2.187313@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.193283@2] NAND device id: c2 dc 90 a2 57 3 [ 2.197476@2] NAND device: Manufacturer ID: [ 2.201525@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.208184@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.213684@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.219205@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.225507@2] mtd->oobavail: 0x10 [ 2.229116@0] aml_nand_init 2119: plat-name:bootloader [ 2.233887@0] Creating 1 MTD partitions on "bootloader": [ 2.239134@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.246508@1] bootloader initialized ok [ 2.248357@1] plat->aml_nand_device ffffff800a778cf8 [ 2.253295@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.259327@1] NAND device id: c2 dc 90 a2 57 3 [ 2.263458@1] NAND device: Manufacturer ID: [ 2.267510@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.274175@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.279669@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.285187@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.291490@1] mtd->oobavail: 0x10 [ 2.294928@1] aml_nand_init 2119: plat-name:nandnormal [ 2.299876@1] bbt_start=20 [ 2.302523@1] env_start=24 [ 2.305186@1] key_start=32 [ 2.307869@1] dtb_start=40 [ 2.310541@1] ddr_start=44 [ 2.313223@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.319698@1] get_free_node 43: bitmap=0 [ 2.323137@1] get_free_node 55: bitmap=1 [ 2.327219@1] get_free_node 43: bitmap=1 [ 2.330898@1] get_free_node 55: bitmap=3 [ 2.334982@1] get_free_node 43: bitmap=3 [ 2.338660@1] get_free_node 55: bitmap=7 [ 2.342541@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.349181@1] nbbt free list: [ 2.352114@1] blockN=21, ec=-1, dirty_flag=0 [ 2.356340@1] blockN=22, ec=-1, dirty_flag=0 [ 2.360566@1] blockN=23, ec=-1, dirty_flag=0 [ 2.364794@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.370202@1] nbbt valid addr: 500000 [ 2.373411@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.379025@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.385267@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.391678@1] get_free_node 43: bitmap=7 [ 2.395154@1] get_free_node 55: bitmap=f [ 2.399238@1] get_free_node 43: bitmap=f [ 2.402917@1] get_free_node 55: bitmap=1f [ 2.407087@1] get_free_node 43: bitmap=1f [ 2.410851@1] get_free_node 55: bitmap=3f [ 2.415021@1] get_free_node 43: bitmap=3f [ 2.418787@1] get_free_node 55: bitmap=7f [ 2.422956@1] get_free_node 43: bitmap=7f [ 2.426722@1] get_free_node 55: bitmap=ff [ 2.430891@1] get_free_node 43: bitmap=ff [ 2.434656@1] get_free_node 55: bitmap=1ff [ 2.438912@1] get_free_node 43: bitmap=1ff [ 2.442764@1] get_free_node 55: bitmap=3ff [ 2.446823@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.453458@1] nenv free list: [ 2.456391@1] blockN=25, ec=-1, dirty_flag=0 [ 2.460617@1] blockN=26, ec=-1, dirty_flag=0 [ 2.464843@1] blockN=27, ec=-1, dirty_flag=0 [ 2.469069@1] blockN=28, ec=-1, dirty_flag=0 [ 2.473295@1] blockN=29, ec=-1, dirty_flag=0 [ 2.477522@1] blockN=30, ec=-1, dirty_flag=0 [ 2.481748@1] blockN=31, ec=-1, dirty_flag=0 [ 2.485974@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.497725@1] nenv valid addr: 610000 [ 2.497745@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.502177@1] get_free_node 43: bitmap=3ff [ 2.506028@1] get_free_node 55: bitmap=7ff [ 2.510307@1] get_free_node 43: bitmap=7ff [ 2.514136@1] get_free_node 55: bitmap=fff [ 2.518392@1] get_free_node 43: bitmap=fff [ 2.522243@1] get_free_node 55: bitmap=1fff [ 2.526586@1] get_free_node 43: bitmap=1fff [ 2.530523@1] get_free_node 55: bitmap=3fff [ 2.534866@1] get_free_node 43: bitmap=3fff [ 2.538803@1] get_free_node 55: bitmap=7fff [ 2.543146@1] get_free_node 43: bitmap=7fff [ 2.547083@1] get_free_node 55: bitmap=ffff [ 2.551426@1] get_free_node 43: bitmap=ffff [ 2.555363@1] get_free_node 55: bitmap=1ffff [ 2.559792@1] get_free_node 43: bitmap=1ffff [ 2.563816@1] get_free_node 55: bitmap=3ffff [ 2.568042@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.574682@1] nkey free list: [ 2.577615@1] blockN=32, ec=-1, dirty_flag=0 [ 2.581840@1] blockN=33, ec=-1, dirty_flag=0 [ 2.586067@1] blockN=34, ec=-1, dirty_flag=0 [ 2.590293@1] blockN=35, ec=-1, dirty_flag=0 [ 2.594520@1] blockN=36, ec=-1, dirty_flag=0 [ 2.598746@1] blockN=37, ec=-1, dirty_flag=0 [ 2.602972@1] blockN=38, ec=-1, dirty_flag=0 [ 2.607199@1] blockN=39, ec=-1, dirty_flag=0 [ 2.611425@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.616513@1] nkey valid addr: fffffffffffc0000 [ 2.620998@1] aml_nand_key_check 1251 NO key exist [ 2.625744@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.632358@1] get_free_node 43: bitmap=3ffff [ 2.636180@1] get_free_node 55: bitmap=7ffff [ 2.640609@1] get_free_node 43: bitmap=7ffff [ 2.644632@1] get_free_node 55: bitmap=fffff [ 2.649060@1] get_free_node 43: bitmap=fffff [ 2.653086@1] get_free_node 55: bitmap=1fffff [ 2.657397@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.664037@1] ndtb free list: [ 2.666970@1] blockN=41, ec=-1, dirty_flag=0 [ 2.671196@1] blockN=42, ec=-1, dirty_flag=0 [ 2.675422@1] blockN=43, ec=-1, dirty_flag=0 [ 2.679649@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.697637@1] ndtb valid addr: a00000 [ 2.697656@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.702087@1] get_free_node 43: bitmap=1fffff [ 2.706197@1] get_free_node 55: bitmap=3fffff [ 2.710713@1] get_free_node 43: bitmap=3fffff [ 2.714822@1] get_free_node 55: bitmap=7fffff [ 2.719134@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.725775@1] nddr free list: [ 2.728700@1] blockN=44, ec=-1, dirty_flag=0 [ 2.732934@1] blockN=45, ec=-1, dirty_flag=0 [ 2.737160@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.742249@1] nddr valid addr: fffffffffffc0000 [ 2.746734@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.751481@1] tpl: off 16777216, size 8388608 [ 2.817766@1] Creating 7 MTD partitions on "nandnormal": [ 2.817797@1] 0x000001000000-0x000001800000 : "tpl" [ 2.824881@2] 0x000001800000-0x000001a00000 : "misc" [ 2.832705@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.834221@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.840610@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.849396@0] 0x000003b00000-0x000015300000 : "system" [ 2.886637@2] 0x000015300000-0x000020000000 : "data" [ 2.910001@0] nandnormal initialized ok [ 2.910084@0] aml_ubootenv_init: register env chardev [ 2.913415@0] aml_ubootenv_init: register env chardev OK [ 2.918680@0] amlnf_dtb_init: register dtb cdev [ 2.923402@0] amlnf_dtb_init: register dtd cdev OK [ 2.927743@0] mtd_nand_probe 267 , err = 0 [ 2.932640@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.938098@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.945062@0] unifykey: storage in base: 0xffffffc005000000 [ 2.949823@0] unifykey: storage out base: 0xffffffc005040000 [ 2.955401@0] unifykey: storage block base: 0xffffffc005080000 [ 2.961181@0] unifykey: probe done! [ 2.965067@0] unifykey: no efuse-version set, use default value: -1 [ 2.970852@0] unifykey: key unify config unifykey-num is 6 [ 2.976312@0] unifykey: key unify fact unifykey-num is 6 [ 2.981564@0] unifykey: unifykey_devno: ee00000 [ 2.986601@0] unifykey: device unifykeys created ok [ 2.990950@0] unifykey: aml_unifykeys_init done! [ 2.995725@0] audio_dsp: [dsp]register dsp to char divece(257) [ 3.002499@0] amlkaraoke init success! [ 3.005176@0] sysled: module init [ 3.008624@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.013556@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.020845@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.027215@0] amlogic rfkill init [ 3.032044@0] dmc_monitor_probe [ 3.033650@0] page_trace_module_init, create sysfs failed [ 3.039958@0] defendkey defendkey: Reserved memory is not enough! [ 3.044791@0] defendkey: probe of defendkey failed with error -22 [ 3.052140@0] usbcore: registered new interface driver snd-usb-audio [ 3.061042@0] asoc debug: aml_audio_controller_probe-130 [ 3.062929@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.068189@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.075973@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.083153@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.089523@0] aml_tdm_platform_probe(), share en = 1[ 3.094268@0] No channel mask node Channel_Mask [ 3.099038@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.104575@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.112527@0] aml_tdm_platform_probe(), share en = 1[ 3.117044@0] No channel mask node Channel_Mask [ 3.121798@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.127342@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.135280@0] aml_tdm_platform_probe(), share en = 1[ 3.139804@0] No channel mask node Channel_Mask [ 3.145391@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.152460@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.160545@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.170714@0] Register vad [ 3.171617@0] check whether to update sound card init data [ 3.177431@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.184425@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.191728@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.197341@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.205010@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.212341@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.218213@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.224701@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.231743@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.237745@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.244618@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.250454@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.257203@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.264615@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.272005@3] snd_card_add_kcontrols card:ffffffc01ca21018 [ 3.277098@3] effect_v2 is not init [ 3.280482@3] Failed to add VAD controls [ 3.284713@3] GACT probability NOT on [ 3.288006@3] Mirror/redirect action on [ 3.291789@3] u32 classifier [ 3.294619@3] Actions configured [ 3.298161@3] Netfilter messages via NETLINK v0.30. [ 3.303242@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.309442@3] ctnetlink v0.93: registering with nfnetlink. [ 3.315144@0] xt_time: kernel timezone is -0000 [ 3.319135@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.325337@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.330355@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.335913@0] Initializing XFRM netlink socket [ 3.340899@0] NET: Registered protocol family 10 [ 3.346124@0] mip6: Mobile IPv6 [ 3.347947@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.353789@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.360796@0] NET: Registered protocol family 17 [ 3.364108@0] NET: Registered protocol family 15 [ 3.368675@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.381782@0] Bluetooth: RFCOMM TTY layer initialized [ 3.386666@0] Bluetooth: RFCOMM socket layer initialized [ 3.391948@0] Bluetooth: RFCOMM ver 1.11 [ 3.395802@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.401229@0] Bluetooth: BNEP filters: protocol multicast [ 3.406580@0] Bluetooth: BNEP socket layer initialized [ 3.411665@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.417705@0] Bluetooth: HIDP socket layer initialized [ 3.422897@0] l2tp_core: L2TP core driver, V2.0 [ 3.427292@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.432190@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.437916@0] l2tp_netlink: L2TP netlink interface [ 3.442672@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.448697@0] l2tp_debugfs: L2TP debugfs support [ 3.453236@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.459836@0] NET: Registered protocol family 35 [ 3.464599@0] Key type dns_resolver registered [ 3.469783@0] Registered swp emulation handler [ 3.473235@0] Registered cp15_barrier emulation handler [ 3.478415@0] Registered setend emulation handler [ 3.483069@0] disable EAS feature [ 3.487133@2] registered taskstats version 1 [ 3.499895@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.006137@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.006218@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.014404@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.022816@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.029834@0] hub 1-0:1.0: USB hub found [ 4.032692@0] hub 1-0:1.0: 1 port detected [ 4.037091@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.042332@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.050142@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.059079@3] hub 2-0:1.0: USB hub found [ 4.062228@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.069497@3] usb usb2: Unsupported the hub [ 4.074022@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.082038@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.190508@3] dwc_otg: Core Release: 3.10a [ 4.190543@3] dwc_otg: Setting default values for core params [ 4.194697@3] dwc_otg: curmode: 0, host_only: 0 [ 4.211499@3] dwc_otg: Using Buffer DMA mode [ 4.211521@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.215403@3] dwc_otg: Working on port type = SLAVE [ 4.220237@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.227217@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.236671@0] gxbb_pm: enter meson_pm_probe! [ 4.236711@0] no vddio3v3_en pin[ 4.238381@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.243397@0] gxbb_pm: meson_pm_probe done [ 4.24779Y 4.254049@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.259447@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.468348@3] ubi0: attaching mtd6 [ 4.996680@3] ubi0: scanning is finished [ 5.000920@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 5.001204@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.008239@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.015101@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.022166@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.028380@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.035711@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.044940@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.054407@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.060023@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.104861@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.106820@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.116803@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.127581@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.133541@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.314818@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.375661@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.459503@1] ubi1: attaching mtd7 [ 5.785919@1] ubi1: scanning is finished [ 5.790127@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.790245@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.797251@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.804140@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.811207@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.817334@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.824662@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.833894@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.843217@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 LE[ 5.852603@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 Bs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.876401@1] UBIFS (ubi1:0): recovery needed [ 5.965300@3] UBIFS (ubi1:0): recovery completed [ 5.965458@3] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.971649@3] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.981675@3] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.992325@3] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.999053@3] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2e8a450 --- 0 [ 7.025392@0] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.033694@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.034336@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.040933@1] aml_tdm_open [ 7.042709@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.056152@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.059630@2] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.141326@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.144988@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.151166@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.199902@3] asoc-aml-card auge_sound: tdm playback enable [ 8.609805@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot The system is going down NOW! Sent SIGTERM to all processes [ 13.299153@3] asoc-aml-card auge_sound: tdm playback stop [ 13.299479@0] asoc-aml-card auge_sound: tdm capture stop [ 13.304533@0] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.297234@3] mtd_nand_reboot_notifier 35 [ 15.297495@3] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.305520@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.308924@3] usb usb2: USB disconnect, device number 1 [ 15.319186@0] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.319707@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.324898@0] usb usb1: USB disconnect, device number 1 [ 15.330961@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.349563@0] reboot: Restarting system [ 15.349784@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21793 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 01 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1978134 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016835@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031587@0] pid_max: default: 32768 minimum: 301 [ 0.036442@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056094@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062393@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209551@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210361@0] CPU0: update cpu_capacity 1024 [ 0.214689@0] ASID allocator initialised with 32768 entries [ 0.252668@0] secmon: can't fine clear_range [ 0.253253@0] EFI services will not be available. [ 0.256093@0] Meson chip version = RevC (25:C - 43:0) [ 0.290026@1] Detected VIPT I-cache on CPU1 [ 0.290088@1] CPU1: update cpu_capacity 1024 [ 0.290090@1] CPU1: Booted secondary processor [410fd034] [ 0.318073@2] Detected VIPT I-cache on CPU2 [ 0.318126@2] CPU2: update cpu_capacity 1024 [ 0.318129@2] CPU2: Booted secondary processor [410fd034] [ 0.346136@3] Detected VIPT I-cache on CPU3 [ 0.346188@3] CPU3: update cpu_capacity 1024 [ 0.346190@3] CPU3: Booted secondary processor [410fd034] [ 0.346280@0] Brought up 4 CPUs [ 0.385500@0] SMP: Total of 4 processors activated. [ 0.390409@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396445@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407408@0] CPU: All CPU(s) started at EL2 [ 0.408184@0] alternatives: patching kernel code [ 0.413590@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420723@0] devtmpfs: initialized [ 0.436174@0] DMI not present or invalid. [ 0.436567@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444554@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451112@0] pinctrl core: initialized pinctrl subsystem [ 0.457683@0] NET: Registered protocol family 16 [ 0.477076@2] cpuidle: using governor menu [ 0.477224@2] register canvas platform driver [ 0.479946@2] register rdma platform driver [ 0.485386@2] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491769@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499237@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505361@2] clkmsr: clkmsr: driver init [ 0.509065@2] codec_mm_module_init [ 0.512519@2] media_configs_system_init [ 0.516652@2] aml_watch_point_probe, in, wp:2 [ 0.522184@2] pstore: using zlib compression [ 0.525577@2] console [pstore-1] enabled [ 0.528905@2] pstore: Registered ramoops as persistent store backend [ 0.535304@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549367@2] aml_iomap: amlogic iomap probe done [ 0.553962@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555962@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564931@2] audio_clocks: audio_clocks_probe done [ 0.573505@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573561@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578717@2] amlogic auge_snd_iomap probe done [ 0.849852@2] vgaarb: loaded [ 0.850259@2] SCSI subsystem initialized [ 0.851376@2] usbcore: registered new interface driver usbfs [ 0.856827@2] usbcore: registered new interface driver hub [ 0.862357@2] usbcore: registered new device driver usb [ 0.867636@2] Linux video capture interface: v2.00 [ 0.872386@2] pps_core: LinuxPPS API ver. 1 registered [ 0.877481@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.886853@2] PTP clock support registered [ 0.895196@2] dmi: Firmware registration failed. [ 0.899240@2] secmon: reserve_mem_size:0x300000 [ 0.900166@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.907102@2] secmon: get page:ffffffbf00140000, 5000 [ 0.911843@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.920237@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.926963@2] fb: osd_init_module [ 0.931478@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.937022@2] Bluetooth: Core ver 2.22 [ 0.940149@2] NET: Registered protocol family 31 [ 0.944754@2] Bluetooth: HCI device and connection manager initialized [ 0.951311@2] Bluetooth: HCI socket layer initialized [ 0.956380@2] Bluetooth: L2CAP socket layer initialized [ 0.961668@2] Bluetooth: SCO socket layer initialized [ 0.974749@2] NetLabel: Initializing [ 0.974783@2] NetLabel: domain hash size = 128 [ 0.977219@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.982474@2] NetLabel: unlabeled traffic allowed by default [ 0.989910@3] clocksource: Switched to clocksource arch_sys_counter [ 1.090399@3] VFS: Disk quotas dquot_6.6.0 [ 1.090505@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.109645@2] NET: Registered protocol family 2 [ 1.110333@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.115875@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.122518@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.129117@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.135078@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.141735@2] NET: Registered protocol family 1 [ 1.146581@2] RPC: Registered named UNIX socket transport module. [ 1.152223@2] RPC: Registered udp transport module. [ 1.157101@2] RPC: Registered tcp transport module. [ 1.162001@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.170116@2] Unpacking initramfs... [ 1.271524@2] Freeing initrd memory: 2308K [ 1.272948@2] hw perfevents: clusterb_enabled = 0 [ 1.274777@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.279212@2] hw perfevents: cluster A irq = 7 [ 1.283781@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.293122@2] audit: initializing netlink subsys (disabled) [ 1.297288@2] audit: type=2000 audit(1.140:1): initialized [ 1.303911@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.324878@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.326842@2] NFS: Registering the id_resolver key type [ 1.330569@2] Key type id_resolver registered [ 1.334892@2] Key type id_legacy registered [ 1.339419@2] fuse init (API version 7.26) [ 1.348013@2] NET: Registered protocol family 38 [ 1.348059@2] Key type asymmetric registered [ 1.352138@2] Asymmetric key parser 'x509' registered [ 1.357486@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.364838@2] io scheduler noop registered (default) [ 1.369836@2] io scheduler deadline registered [ 1.374493@2] io scheduler cfq registered [ 1.389194@0] random: fast init done [ 1.389262@0] random: crng init done [ 1.390735@2] Unable to detect cache hierarchy for CPU 0 [ 1.427976@2] loop: module loaded [ 1.432948@2] zram: Added device: zram0 [ 1.433348@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.439020@2] libphy: Fixed MDIO Bus: probed [ 1.442635@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.447351@2] tun: (C) 1999-2004 Max Krasnyansky [ 1.454970@2] PPP generic driver version 2.4.2 [ 1.458471@2] PPP BSD Compression module registered [ 1.463100@2] PPP Deflate Compression module registered [ 1.468350@2] PPP MPPE Compression module registered [ 1.473323@2] NET: Registered protocol family 24 [ 1.478100@2] usbcore: registered new interface driver asix [ 1.483692@2] usbcore: registered new interface driver ax88179_178a [ 1.489963@2] usbcore: registered new interface driver cdc_ether [ 1.495980@2] usbcore: registered new interface driver net1080 [ 1.501834@2] usbcore: registered new interface driver cdc_subset [ 1.507964@2] usbcore: registered new interface driver zaurus [ 1.513784@2] usbcore: registered new interface driver cdc_ncm [ 1.520190@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.526284@2] ehci-pci: EHCI PCI platform driver [ 1.531009@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.537326@2] ohci-pci: OHCI PCI platform driver [ 1.542510@2] usbcore: registered new interface driver cdc_acm [ 1.547811@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.556115@2] usbcore: registered new interface driver usb-storage [ 1.562420@2] usbcore: registered new interface driver usbserial [ 1.568849@2] mousedev: PS/2 mouse device common for all mice [ 1.574452@2] usbcore: registered new interface driver xpad [ 1.579879@1] i2c /dev entries driver [ 1.583524@1] usbcore: registered new interface driver uvcvideo [ 1.589289@1] USB Video Class driver (1.1.1) [ 1.593548@1] md: linear personality registered for level -1 [ 1.599753@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.609340@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.615229@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.623030@1] usbcore: registered new interface driver usbhid [ 1.626904@1] usbhid: USB HID core driver [ 1.631165@0] ashmem: initialized [ 1.634641@1] logger: created 512K log 'log_main' [ 1.639168@0] logger: created 1K log 'log_events' [ 1.643874@1] logger: created 1K log 'log_radio' [ 1.648525@0] logger: created 16K log 'log_system' [ 1.653161@0] exFAT: Version 1.3.0 [ 1.657829@3] ff803000.serial: clock gate not found [ 1.661545@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.668713@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.683660@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.686261@3] console [ttyS0] enabled [ 1.686261@3] console [ttyS0] enabled [ 1.693506@3] bootconsole [aml_uart0] disabled [ 1.693506@3] bootconsole [aml_uart0] disabled [ 1.702963@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.709401@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.719699@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.729496@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.736023@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.748395@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.752509@0] irq = 20 [ 1.754861@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.763643@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.768074@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.773317@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.779747@0] meson-remote: Driver init [ 1.783712@0] meson-remote: remote_probe [ 1.787320@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.792392@0] meson-remote ff808040.rc: don't find the node [ 1.798941@0] meson-remote ff808040.rc: led_blink = 0 [ 1.803938@0] meson-remote ff808040.rc: don't find the node [ 1.810843@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.816483@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.822181@0] meson-remote ff808040.rc: custom_number = 3 [ 1.827498@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.833182@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.840337@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.846633@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.852780@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.858448@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.865606@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.871902@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.878047@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.883720@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.890877@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.897174@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.903303@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.910025@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.915803@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.921581@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.927274@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.932966@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.938918@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.944783@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.950389@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.955736@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.961084@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.967115@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.974120@0] meson-remote: IR XMP protocol handler initialized [ 1.979736@0] efusekeynum: 4 [ 1.982262@0] efusekeyname: mac offset: 0 size: 6 [ 1.988610@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.994995@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.001372@0] efusekeyname: usid offset: 18 size: 16 [ 2.008021@1] efuse efuse: probe OK! [ 2.013538@0] ge2d: ge2d_init_module [ 2.015404@0] [tsync_pcr_init]init success. [ 2.019887@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.026371@1] DI: di_module_init ok. [ 2.029420@1] dim:dim_module_init [ 2.032734@1] dim:dim_module_init finish [ 2.036399@1] dil:dil_init. [ 2.039353@1] dil:dil_init ok. [ 2.042219@1] vdin_drv_init: major 241 [ 2.046131@1] vdin_drv_init: vdin driver init done [ 2.050672@1] [viuin..]viuin_init_module viuin module init [ 2.056475@1] [viuin..]viuin_probe probe ok. [ 2.060544@1] amlvid:info: amlvideo_init called[ 2.064606@1] amlvid:info: amlvideo_create_instance called [ 2.070027@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.075377@0] amlvideo-000: V4L2 device registered as video10 [ 2.080834@0] amlvid:info: amlvideo_create_instance called [ 2.086247@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.091555@2] amlvideo-001: V4L2 device registered as video23 [ 2.097324@2] PPMGRDRV: warn: ppmgr module init func called [ 2.103497@2] videosync_create_instance dev_s ffffffc01c919000,dev_s->dev ffffffc01c901700 [ 2.110751@2] videosync_create_instance reg videosync.0 [ 2.115997@2] aml_vecm_init:module init [ 2.115998@3] videosync_thread started [ 2.123739@2] amdolby_vision_init:module init [ 2.128038@2] prime_sl module init [ 2.131639@2] amlogic mtd driver init [ 2.135352@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.140575@2] bl mode descrete [ 2.143517@2] fip_copies 4 [ 2.146176@2] fip_size 0x200000 [ 2.149273@2] nand_clk_ctrl 0xffe07000 [ 2.152989@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.158625@2] nand_clk_ctrl 0xffe07000 [ 2.162320@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.170637@2] plat->aml_nand_device ffffff800a778cf8 [ 2.175164@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.181144@2] NAND device id: c2 dc 90 a2 57 3 [ 2.185340@2] NAND device: Manufacturer ID: [ 2.189389@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.196048@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.201548@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.207070@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.213371@2] mtd->oobavail: 0x10 [ 2.216944@2] aml_nand_init 2119: plat-name:bootloader [ 2.221752@2] Creating 1 MTD partitions on "bootloader": [ 2.227008@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.234751@0] bootloader initialized ok [ 2.236222@0] plat->aml_nand_device ffffff800a778cf8 [ 2.241170@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.247188@0] NAND device id: c2 dc 90 a2 57 3 [ 2.251322@0] NAND device: Manufacturer ID: [ 2.255374@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.262028@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.267533@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.273051@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.279356@0] mtd->oobavail: 0x10 [ 2.282833@0] aml_nand_init 2119: plat-name:nandnormal [ 2.287738@0] bbt_start=20 [ 2.290387@0] env_start=24 [ 2.293051@0] key_start=32 [ 2.295733@0] dtb_start=40 [ 2.298406@0] ddr_start=44 [ 2.301087@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.307560@0] get_free_node 43: bitmap=0 [ 2.311001@0] get_free_node 55: bitmap=1 [ 2.315084@0] get_free_node 43: bitmap=1 [ 2.318762@0] get_free_node 55: bitmap=3 [ 2.322847@0] get_free_node 43: bitmap=3 [ 2.326525@0] get_free_node 55: bitmap=7 [ 2.330406@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.337046@0] nbbt free list: [ 2.339979@0] blockN=21, ec=-1, dirty_flag=0 [ 2.344205@0] blockN=22, ec=-1, dirty_flag=0 [ 2.348431@0] blockN=23, ec=-1, dirty_flag=0 [ 2.352658@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.358075@0] nbbt valid addr: 500000 [ 2.361276@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.366890@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.373132@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.379542@0] get_free_node 43: bitmap=7 [ 2.383018@0] get_free_node 55: bitmap=f [ 2.387102@0] get_free_node 43: bitmap=f [ 2.390781@0] get_free_node 55: bitmap=1f [ 2.394951@0] get_free_node 43: bitmap=1f [ 2.398716@0] get_free_node 55: bitmap=3f [ 2.402886@0] get_free_node 43: bitmap=3f [ 2.406651@0] get_free_node 55: bitmap=7f [ 2.410821@0] get_free_node 43: bitmap=7f [ 2.414586@0] get_free_node 55: bitmap=ff [ 2.418756@0] get_free_node 43: bitmap=ff [ 2.422521@0] get_free_node 55: bitmap=1ff [ 2.426777@0] get_free_node 43: bitmap=1ff [ 2.430634@0] get_free_node 55: bitmap=3ff [ 2.434682@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.441322@0] nenv free list: [ 2.444255@0] blockN=25, ec=-1, dirty_flag=0 [ 2.448481@0] blockN=26, ec=-1, dirty_flag=0 [ 2.452707@0] blockN=27, ec=-1, dirty_flag=0 [ 2.456933@0] blockN=28, ec=-1, dirty_flag=0 [ 2.461160@0] blockN=29, ec=-1, dirty_flag=0 [ 2.465386@0] blockN=30, ec=-1, dirty_flag=0 [ 2.469612@0] blockN=31, ec=-1, dirty_flag=0 [ 2.473839@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.485579@0] nenv valid addr: 610000 [ 2.485599@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.490041@0] get_free_node 43: bitmap=3ff [ 2.493876@0] get_free_node 55: bitmap=7ff [ 2.498163@0] get_free_node 43: bitmap=7ff [ 2.501992@0] get_free_node 55: bitmap=fff [ 2.506248@0] get_free_node 43: bitmap=fff [ 2.510099@0] get_free_node 55: bitmap=1fff [ 2.514442@0] get_free_node 43: bitmap=1fff [ 2.518379@0] get_free_node 55: bitmap=3fff [ 2.522722@0] get_free_node 43: bitmap=3fff [ 2.526659@0] get_free_node 55: bitmap=7fff [ 2.531002@0] get_free_node 43: bitmap=7fff [ 2.534939@0] get_free_node 55: bitmap=ffff [ 2.539281@0] get_free_node 43: bitmap=ffff [ 2.543219@0] get_free_node 55: bitmap=1ffff [ 2.547648@0] get_free_node 43: bitmap=1ffff [ 2.551672@0] get_free_node 55: bitmap=3ffff [ 2.555897@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.562538@0] nkey free list: [ 2.565463@0] blockN=32, ec=-1, dirty_flag=0 [ 2.569697@0] blockN=33, ec=-1, dirty_flag=0 [ 2.573923@0] blockN=34, ec=-1, dirty_flag=0 [ 2.578149@0] blockN=35, ec=-1, dirty_flag=0 [ 2.582375@0] blockN=36, ec=-1, dirty_flag=0 [ 2.586602@0] blockN=37, ec=-1, dirty_flag=0 [ 2.590828@0] blockN=38, ec=-1, dirty_flag=0 [ 2.595054@0] blockN=39, ec=-1, dirty_flag=0 [ 2.599281@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.604369@0] nkey valid addr: fffffffffffc0000 [ 2.608860@0] aml_nand_key_check 1251 NO key exist [ 2.613599@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.620214@0] get_free_node 43: bitmap=3ffff [ 2.624035@0] get_free_node 55: bitmap=7ffff [ 2.628465@0] get_free_node 43: bitmap=7ffff [ 2.632488@0] get_free_node 55: bitmap=fffff [ 2.636919@0] get_free_node 43: bitmap=fffff [ 2.640940@0] get_free_node 55: bitmap=1fffff [ 2.645253@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.651893@0] ndtb free list: [ 2.654825@0] blockN=41, ec=-1, dirty_flag=0 [ 2.659052@0] blockN=42, ec=-1, dirty_flag=0 [ 2.663278@0] blockN=43, ec=-1, dirty_flag=0 [ 2.667505@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.685501@0] ndtb valid addr: a00000 [ 2.685521@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.689953@0] get_free_node 43: bitmap=1fffff [ 2.694062@0] get_free_node 55: bitmap=3fffff [ 2.698577@0] get_free_node 43: bitmap=3fffff [ 2.702687@0] get_free_node 55: bitmap=7fffff [ 2.706999@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.713638@0] nddr free list: [ 2.716572@0] blockN=44, ec=-1, dirty_flag=0 [ 2.720798@0] blockN=45, ec=-1, dirty_flag=0 [ 2.725025@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.730113@0] nddr valid addr: fffffffffffc0000 [ 2.734599@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.739348@0] tpl: off 16777216, size 8388608 [ 2.805610@0] Creating 7 MTD partitions on "nandnormal": [ 2.805640@0] 0x000001000000-0x000001800000 : "tpl" [ 2.813037@2] 0x000001800000-0x000001a00000 : "misc" [ 2.816571@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.821382@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.828409@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.833147@3] 0x000003b00000-0x000015300000 : "system" [ 2.872200@3] 0x000015300000-0x000020000000 : "data" [ 2.895626@3] nandnormal initialized ok [ 2.895717@3] aml_ubootenv_init: register env chardev [ 2.899102@3] aml_ubootenv_init: register env chardev OK [ 2.904307@3] amlnf_dtb_init: register dtb cdev [ 2.908818@3] amlnf_dtb_init: register dtd cdev OK [ 2.913374@3] mtd_nand_probe 267 , err = 0 [ 2.918109@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.923689@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.930501@3] unifykey: storage in base: 0xffffffc005000000 [ 2.935450@3] unifykey: storage out base: 0xffffffc005040000 [ 2.941036@3] unifykey: storage block base: 0xffffffc005080000 [ 2.946808@3] unifykey: probe done! [ 2.950697@3] unifykey: no efuse-version set, use default value: -1 [ 2.956484@3] unifykey: key unify config unifykey-num is 6 [ 2.961942@3] unifykey: key unify fact unifykey-num is 6 [ 2.967190@3] unifykey: unifykey_devno: ee00000 [ 2.971931@3] unifykey: device unifykeys created ok [ 2.976566@3] unifykey: aml_unifykeys_init done! [ 2.981352@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.987678@3] amlkaraoke init success! [ 2.990831@3] sysled: module init [ 2.994215@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.999185@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.006312@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.012837@3] amlogic rfkill init [ 3.017463@3] dmc_monitor_probe [ 3.019275@3] page_trace_module_init, create sysfs failed [ 3.032909@3] defendkey defendkey: Reserved memory is not enough! [ 3.033379@3] defendkey: probe of defendkey failed with error -22 [ 3.040386@1] usbcore: registered new interface driver snd-usb-audio [ 3.049540@1] asoc debug: aml_audio_controller_probe-130 [ 3.051533@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.056811@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.064587@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.071765@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.078153@1] aml_tdm_platform_probe(), share en = 1[ 3.082883@1] No channel mask node Channel_Mask [ 3.087658@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.093194@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.101153@1] aml_tdm_platform_probe(), share en = 1[ 3.105658@1] No channel mask node Channel_Mask [ 3.110392@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.115958@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.123893@1] aml_tdm_platform_probe(), share en = 1[ 3.128420@1] No channel mask node Channel_Mask [ 3.134072@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.141068@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.149150@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.159173@1] Register vad [ 3.160201@1] check whether to update sound card init data [ 3.166085@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.173023@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.180355@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.185954@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.193630@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.200960@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.206831@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.213313@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.220356@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.226357@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.233296@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.239087@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.245807@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.254790@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.260618@3] snd_card_add_kcontrols card:ffffffc01d802818 [ 3.265682@3] effect_v2 is not init [ 3.269151@3] Failed to add VAD controls [ 3.273351@3] GACT probability NOT on [ 3.276645@3] Mirror/redirect action on [ 3.280399@3] u32 classifier [ 3.283236@3] Actions configured [ 3.286783@3] Netfilter messages via NETLINK v0.30. [ 3.291854@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.298071@3] ctnetlink v0.93: registering with nfnetlink. [ 3.303759@3] xt_time: kernel timezone is -0000 [ 3.307755@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.313994@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.318950@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.324522@3] Initializing XFRM netlink socket [ 3.329506@3] NET: Registered protocol family 10 [ 3.334726@3] mip6: Mobile IPv6 [ 3.336558@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.342413@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.349419@3] NET: Registered protocol family 17 [ 3.352732@3] NET: Registered protocol family 15 [ 3.357286@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.370396@3] Bluetooth: RFCOMM TTY layer initialized [ 3.375291@3] Bluetooth: RFCOMM socket layer initialized [ 3.380563@3] Bluetooth: RFCOMM ver 1.11 [ 3.384422@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.389842@3] Bluetooth: BNEP filters: protocol multicast [ 3.395196@3] Bluetooth: BNEP socket layer initialized [ 3.400278@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.406321@3] Bluetooth: HIDP socket layer initialized [ 3.411482@3] l2tp_core: L2TP core driver, V2.0 [ 3.415905@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.420805@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.426545@3] l2tp_netlink: L2TP netlink interface [ 3.431290@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.437317@3] l2tp_debugfs: L2TP debugfs support [ 3.441851@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.448455@3] NET: Registered protocol family 35 [ 3.453211@3] Key type dns_resolver registered [ 3.458402@3] Registered swp emulation handler [ 3.461780@3] Registered cp15_barrier emulation handler [ 3.466964@3] Registered setend emulation handler [ 3.471676@3] disable EAS feature [ 3.475691@3] registered taskstats version 1 [ 3.488539@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.994799@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.994858@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.003003@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.011481@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.018395@1] hub 1-0:1.0: USB hub found [ 4.021355@1] hub 1-0:1.0: 1 port detected [ 4.025739@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.031001@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.038807@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.047754@3] hub 2-0:1.0: USB hub found [ 4.050875@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.058163@3] usb usb2: Unsupported the hub [ 4.062688@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.070703@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.179133@0] dwc_otg: Core Release: 3.10a [ 4.179166@0] dwc_otg: Setting default values for core params [ 4.183328@0] dwc_otg: curmode: 0, host_only: 0 [ 4.200117@0] dwc_otg: Using Buffer DMA mode [ 4.200139@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.204023@0] dwc_otg: Working on port type = SLAVE [ 4.208856@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.215940@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.225090@0] gxbb_pm: enter meson_pm_probe! [ 4.225128@0] no vddio3v3_en pin[ 4.226800@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.231804@0] gxbb_pm: meson_pm_probe done [ 4.23618[ 4.242453@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.247887@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.455275@1] ubi0: attaching mtd6 [ 4.983472@1] ubi0: scanning is finished [ 4.987701@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.987991@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.995042@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.001888@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.008952@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.015167@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.022494@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.031726@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.041135@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.046929@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2005 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.091676@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.093605@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.103648@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.114405@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.120348@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.299567@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.360518@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.445803@3] ubi1: attaching mtd7 [ 5.772343@3] ubi1: scanning is finished [ 5.776204@3] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.776341@3] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.783350@3] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.790236@3] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.797302@3] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.803430@3] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810758@3] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.819991@3] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.829312@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.838647@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.862409@1] UBIFS (ubi1:0): recovery needed [ 5.952902@1] UBIFS (ubi1:0): recovery completed [ 5.953061@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.959242@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.969237@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.979958@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.986660@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f30bd450 --- 0 [ 7.010224@1] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.021145@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.023734@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.030421@1] aml_tdm_open [ 7.031915@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.045442@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.048936@0] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.129418@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.133116@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.139418@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.188161@3] asoc-aml-card auge_sound: tdm playback enable [ 8.610271@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21931 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015889 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975519 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016834@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056094@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106553@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129134@0] ftrace: allocating 43519 entries in 170 pages [ 0.209522@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210334@0] CPU0: update cpu_capacity 1024 [ 0.214659@0] ASID allocator initialised with 32768 entries [ 0.252639@0] secmon: can't fine clear_range [ 0.253228@0] EFI services will not be available. [ 0.256067@0] Meson chip version = RevC (25:C - 43:0) [ 0.290005@1] Detected VIPT I-cache on CPU1 [ 0.290066@1] CPU1: update cpu_capacity 1024 [ 0.290068@1] CPU1: Booted secondary processor [410fd034] [ 0.318047@2] Detected VIPT I-cache on CPU2 [ 0.318101@2] CPU2: update cpu_capacity 1024 [ 0.318103@2] CPU2: Booted secondary processor [410fd034] [ 0.346114@3] Detected VIPT I-cache on CPU3 [ 0.346164@3] CPU3: update cpu_capacity 1024 [ 0.346166@3] CPU3: Booted secondary processor [410fd034] [ 0.346260@0] Brought up 4 CPUs [ 0.385482@0] SMP: Total of 4 processors activated. [ 0.390390@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396427@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407394@0] CPU: All CPU(s) started at EL2 [ 0.408166@0] alternatives: patching kernel code [ 0.413572@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420707@0] devtmpfs: initialized [ 0.436152@0] DMI not present or invalid. [ 0.436553@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444535@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451101@0] pinctrl core: initialized pinctrl subsystem [ 0.457708@0] NET: Registered protocol family 16 [ 0.485041@0] cpuidle: using governor menu [ 0.485193@0] register canvas platform driver [ 0.487910@0] register rdma platform driver [ 0.493372@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499731@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507223@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513318@0] clkmsr: clkmsr: driver init [ 0.517043@0] codec_mm_module_init [ 0.520473@0] media_configs_system_init [ 0.524609@0] aml_watch_point_probe, in, wp:2 [ 0.529260@0] pstore: using zlib compression [ 0.533541@0] console [pstore-1] enabled [ 0.536867@0] pstore: Registered ramoops as persistent store backend [ 0.543279@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557321@0] aml_iomap: amlogic iomap probe done [ 0.562006@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563915@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572887@0] audio_clocks: audio_clocks_probe done [ 0.581527@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581583@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586753@0] amlogic auge_snd_iomap probe done [ 0.865889@0] vgaarb: loaded [ 0.866278@0] SCSI subsystem initialized [ 0.867416@0] usbcore: registered new interface driver usbfs [ 0.872868@0] usbcore: registered new interface driver hub [ 0.878403@0] usbcore: registered new device driver usb [ 0.883672@0] Linux video capture interface: v2.00 [ 0.888450@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893499@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902892@0] PTP clock support registered [ 0.911239@0] dmi: Firmware registration failed. [ 0.915305@0] secmon: reserve_mem_size:0x300000 [ 0.916204@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.923178@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927884@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.936272@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.943012@0] fb: osd_init_module [ 0.947496@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.953075@0] Bluetooth: Core ver 2.22 [ 0.956190@0] NET: Registered protocol family 31 [ 0.960797@0] Bluetooth: HCI device and connection manager initialized [ 0.967347@0] Bluetooth: HCI socket layer initialized [ 0.972414@0] Bluetooth: L2CAP socket layer initialized [ 0.977731@0] Bluetooth: SCO socket layer initialized [ 0.986810@0] NetLabel: Initializing [ 0.986843@0] NetLabel: domain hash size = 128 [ 0.990877@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996111@0] NetLabel: unlabeled traffic allowed by default [ 1.003585@1] clocksource: Switched to clocksource arch_sys_counter [ 1.104116@1] VFS: Disk quotas dquot_6.6.0 [ 1.104221@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.122952@3] NET: Registered protocol family 2 [ 1.123731@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.129169@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.135848@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142663@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148380@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.155056@0] NET: Registered protocol family 1 [ 1.159902@0] RPC: Registered named UNIX socket transport module. [ 1.165531@0] RPC: Registered udp transport module. [ 1.170409@0] RPC: Registered tcp transport module. [ 1.175310@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.183309@0] Unpacking initramfs... [ 1.284949@0] Freeing initrd memory: 2308K [ 1.286373@0] hw perfevents: clusterb_enabled = 0 [ 1.288302@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.292663@0] hw perfevents: cluster A irq = 7 [ 1.297173@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.306565@0] audit: initializing netlink subsys (disabled) [ 1.310712@0] audit: type=2000 audit(1.080:1): initialized [ 1.317352@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.334181@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.336155@0] NFS: Registering the id_resolver key type [ 1.339863@0] Key type id_resolver registered [ 1.344190@0] Key type id_legacy registered [ 1.348681@0] fuse init (API version 7.26) [ 1.357222@0] NET: Registered protocol family 38 [ 1.357269@0] Key type asymmetric registered [ 1.361457@0] Asymmetric key parser 'x509' registered [ 1.366790@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.374187@0] io scheduler noop registered (default) [ 1.379107@0] io scheduler deadline registered [ 1.383854@0] io scheduler cfq registered [ 1.398456@2] random: fast init done [ 1.398522@2] random: crng init done [ 1.399034@0] Unable to detect cache hierarchy for CPU 0 [ 1.437233@0] loop: module loaded [ 1.442217@0] zram: Added device: zram0 [ 1.442632@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.448317@0] libphy: Fixed MDIO Bus: probed [ 1.451997@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.456629@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.464267@0] PPP generic driver version 2.4.2 [ 1.467760@0] PPP BSD Compression module registered [ 1.472367@0] PPP Deflate Compression module registered [ 1.477618@0] PPP MPPE Compression module registered [ 1.482586@0] NET: Registered protocol family 24 [ 1.487363@0] usbcore: registered new interface driver asix [ 1.492953@0] usbcore: registered new interface driver ax88179_178a [ 1.499218@0] usbcore: registered new interface driver cdc_ether [ 1.505243@0] usbcore: registered new interface driver net1080 [ 1.511121@0] usbcore: registered new interface driver cdc_subset [ 1.517232@0] usbcore: registered new interface driver zaurus [ 1.523032@0] usbcore: registered new interface driver cdc_ncm [ 1.529479@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.535559@0] ehci-pci: EHCI PCI platform driver [ 1.540280@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.546590@0] ohci-pci: OHCI PCI platform driver [ 1.551808@0] usbcore: registered new interface driver cdc_acm [ 1.557068@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.565404@0] usbcore: registered new interface driver usb-storage [ 1.571665@0] usbcore: registered new interface driver usbserial [ 1.578134@3] mousedev: PS/2 mouse device common for all mice [ 1.583728@3] usbcore: registered new interface driver xpad [ 1.589164@1] i2c /dev entries driver [ 1.592751@1] usbcore: registered new interface driver uvcvideo [ 1.598575@1] USB Video Class driver (1.1.1) [ 1.602815@1] md: linear personality registered for level -1 [ 1.609017@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.618636@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.624493@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.632289@1] usbcore: registered new interface driver usbhid [ 1.636186@1] usbhid: USB HID core driver [ 1.640414@3] ashmem: initialized [ 1.643898@3] logger: created 512K log 'log_main' [ 1.648440@3] logger: created 1K log 'log_events' [ 1.653158@3] logger: created 1K log 'log_radio' [ 1.657777@3] logger: created 16K log 'log_system' [ 1.662416@3] exFAT: Version 1.3.0 [ 1.667693@3] ff803000.serial: clock gate not found [ 1.670757@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.677948@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.692925@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.695506@3] console [ttyS0] enabled [ 1.695506@3] console [ttyS0] enabled [ 1.702717@3] bootconsole [aml_uart0] disabled [ 1.702717@3] bootconsole [aml_uart0] disabled [ 1.712259@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.718674@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.728930@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.738772@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.745286@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.757695@2] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.761765@2] irq = 20 [ 1.764100@2] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.772982@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.777349@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.782502@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.789023@2] meson-remote: Driver init [ 1.792982@2] meson-remote: remote_probe [ 1.796601@2] meson-remote ff808040.rc: protocol = 0x1 [ 1.801653@2] meson-remote ff808040.rc: don't find the node [ 1.808209@2] meson-remote ff808040.rc: led_blink = 0 [ 1.813203@2] meson-remote ff808040.rc: don't find the node [ 1.820107@2] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.825745@2] meson-remote ff808040.rc: platform_data irq =19 [ 1.831448@2] meson-remote ff808040.rc: custom_number = 3 [ 1.836762@2] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.842449@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.849602@2] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.855898@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.862043@2] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.867714@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.874872@2] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.881168@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.887313@2] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.892985@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.900143@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.906439@2] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.912568@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.919290@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.925069@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.930847@2] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.936540@2] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.942232@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.948184@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.954048@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.959654@2] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.965002@2] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.970349@2] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.976356@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.983321@1] meson-remote: IR XMP protocol handler initialized [ 1.989007@1] efusekeynum: 4 [ 1.991491@1] efusekeyname: mac offset: 0 size: 6 [ 1.997903@1] efusekeyname: mac_bt offset: 6 size: 6 [ 2.004267@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.010638@1] efusekeyname: usid offset: 18 size: 16 [ 2.017275@2] efuse efuse: probe OK! [ 2.022845@0] ge2d: ge2d_init_module [ 2.024694@0] [tsync_pcr_init]init success. [ 2.029172@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.035640@2] DI: di_module_init ok. [ 2.038708@2] dim:dim_module_init [ 2.042005@2] dim:dim_module_init finish [ 2.045662@2] dil:dil_init. [ 2.048616@2] dil:dil_init ok. [ 2.051461@2] vdin_drv_init: major 241 [ 2.055430@2] vdin_drv_init: vdin driver init done [ 2.059897@2] [viuin..]viuin_init_module viuin module init [ 2.065727@2] [viuin..]viuin_probe probe ok. [ 2.069809@2] amlvid:info: amlvideo_init called[ 2.073875@2] amlvid:info: amlvideo_create_instance called [ 2.079286@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.084633@1] amlvideo-000: V4L2 device registered as video10 [ 2.090088@1] amlvid:info: amlvideo_create_instance called [ 2.095505@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.100822@0] amlvideo-001: V4L2 device registered as video23 [ 2.106611@0] PPMGRDRV: warn: ppmgr module init func called [ 2.112791@0] videosync_create_instance dev_s ffffffc01c954c00,dev_s->dev ffffffc01d96bf00 [ 2.120052@0] videosync_create_instance reg videosync.0 [ 2.125457@0] aml_vecm_init:module init [ 2.125458@2] videosync_thread started [ 2.133019@0] amdolby_vision_init:module init [ 2.137278@0] prime_sl module init [ 2.140900@0] amlogic mtd driver init [ 2.144597@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.149850@0] bl mode descrete [ 2.152771@0] fip_copies 4 [ 2.155434@0] fip_size 0x200000 [ 2.158551@0] nand_clk_ctrl 0xffe07000 [ 2.162255@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.167889@0] nand_clk_ctrl 0xffe07000 [ 2.171601@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.179925@0] plat->aml_nand_device ffffff800a778cf8 [ 2.184432@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.190415@0] NAND device id: c2 dc 90 a2 57 3 [ 2.194618@0] NAND device: Manufacturer ID: [ 2.198656@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.205319@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.210815@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.216336@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.222637@0] mtd->oobavail: 0x10 [ 2.226202@0] aml_nand_init 2119: plat-name:bootloader [ 2.231012@0] Creating 1 MTD partitions on "bootloader": [ 2.236269@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.243762@2] bootloader initialized ok [ 2.245488@2] plat->aml_nand_device ffffff800a778cf8 [ 2.250427@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.256456@2] NAND device id: c2 dc 90 a2 57 3 [ 2.260588@2] NAND device: Manufacturer ID: [ 2.264641@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.271294@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.276799@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.282316@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.288622@2] mtd->oobavail: 0x10 [ 2.292100@2] aml_nand_init 2119: plat-name:nandnormal [ 2.297007@2] bbt_start=20 [ 2.299653@2] env_start=24 [ 2.302316@2] key_start=32 [ 2.304999@2] dtb_start=40 [ 2.307671@2] ddr_start=44 [ 2.310340@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.316827@2] get_free_node 43: bitmap=0 [ 2.320267@2] get_free_node 55: bitmap=1 [ 2.324350@2] get_free_node 43: bitmap=1 [ 2.328028@2] get_free_node 55: bitmap=3 [ 2.332112@2] get_free_node 43: bitmap=3 [ 2.335790@2] get_free_node 55: bitmap=7 [ 2.339672@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.346311@2] nbbt free list: [ 2.349244@2] blockN=21, ec=-1, dirty_flag=0 [ 2.353471@2] blockN=22, ec=-1, dirty_flag=0 [ 2.357697@2] blockN=23, ec=-1, dirty_flag=0 [ 2.361924@2] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.367333@2] nbbt valid addr: 500000 [ 2.370550@2] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.376156@2] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.382397@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.388808@2] get_free_node 43: bitmap=7 [ 2.392284@2] get_free_node 55: bitmap=f [ 2.396368@2] get_free_node 43: bitmap=f [ 2.400046@2] get_free_node 55: bitmap=1f [ 2.404217@2] get_free_node 43: bitmap=1f [ 2.407981@2] get_free_node 55: bitmap=3f [ 2.412151@2] get_free_node 43: bitmap=3f [ 2.415916@2] get_free_node 55: bitmap=7f [ 2.420086@2] get_free_node 43: bitmap=7f [ 2.423852@2] get_free_node 55: bitmap=ff [ 2.428021@2] get_free_node 43: bitmap=ff [ 2.431787@2] get_free_node 55: bitmap=1ff [ 2.436042@2] get_free_node 43: bitmap=1ff [ 2.439893@2] get_free_node 55: bitmap=3ff [ 2.443948@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.450591@2] nenv free list: [ 2.453521@2] blockN=25, ec=-1, dirty_flag=0 [ 2.457747@2] blockN=26, ec=-1, dirty_flag=0 [ 2.461973@2] blockN=27, ec=-1, dirty_flag=0 [ 2.466199@2] blockN=28, ec=-1, dirty_flag=0 [ 2.470425@2] blockN=29, ec=-1, dirty_flag=0 [ 2.474651@2] blockN=30, ec=-1, dirty_flag=0 [ 2.478878@2] blockN=31, ec=-1, dirty_flag=0 [ 2.483104@2] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.494844@2] nenv valid addr: 610000 [ 2.494864@2] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.499299@2] get_free_node 43: bitmap=3ff [ 2.503150@2] get_free_node 55: bitmap=7ff [ 2.507406@2] get_free_node 43: bitmap=7ff [ 2.511257@2] get_free_node 55: bitmap=fff [ 2.515513@2] get_free_node 43: bitmap=fff [ 2.519365@2] get_free_node 55: bitmap=1fff [ 2.523712@2] get_free_node 43: bitmap=1fff [ 2.527645@2] get_free_node 55: bitmap=3fff [ 2.531987@2] get_free_node 43: bitmap=3fff [ 2.535925@2] get_free_node 55: bitmap=7fff [ 2.540267@2] get_free_node 43: bitmap=7fff [ 2.544204@2] get_free_node 55: bitmap=ffff [ 2.548548@2] get_free_node 43: bitmap=ffff [ 2.552485@2] get_free_node 55: bitmap=1ffff [ 2.556913@2] get_free_node 43: bitmap=1ffff [ 2.560937@2] get_free_node 55: bitmap=3ffff [ 2.565163@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.571803@2] nkey free list: [ 2.574728@2] blockN=32, ec=-1, dirty_flag=0 [ 2.578962@2] blockN=33, ec=-1, dirty_flag=0 [ 2.583188@2] blockN=34, ec=-1, dirty_flag=0 [ 2.587415@2] blockN=35, ec=-1, dirty_flag=0 [ 2.591641@2] blockN=36, ec=-1, dirty_flag=0 [ 2.595867@2] blockN=37, ec=-1, dirty_flag=0 [ 2.600094@2] blockN=38, ec=-1, dirty_flag=0 [ 2.604320@2] blockN=39, ec=-1, dirty_flag=0 [ 2.608546@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.613635@2] nkey valid addr: fffffffffffc0000 [ 2.618126@2] aml_nand_key_check 1251 NO key exist [ 2.622864@2] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.629495@2] get_free_node 43: bitmap=3ffff [ 2.633303@2] get_free_node 55: bitmap=7ffff [ 2.637730@2] get_free_node 43: bitmap=7ffff [ 2.641753@2] get_free_node 55: bitmap=fffff [ 2.646182@2] get_free_node 43: bitmap=fffff [ 2.650206@2] get_free_node 55: bitmap=1fffff [ 2.654518@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.661158@2] ndtb free list: [ 2.664091@2] blockN=41, ec=-1, dirty_flag=0 [ 2.668317@2] blockN=42, ec=-1, dirty_flag=0 [ 2.672543@2] blockN=43, ec=-1, dirty_flag=0 [ 2.676770@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.694768@2] ndtb valid addr: a00000 [ 2.694788@2] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.699217@2] get_free_node 43: bitmap=1fffff [ 2.703327@2] get_free_node 55: bitmap=3fffff [ 2.707846@2] get_free_node 43: bitmap=3fffff [ 2.711953@2] get_free_node 55: bitmap=7fffff [ 2.716264@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.722904@2] nddr free list: [ 2.725837@2] blockN=44, ec=-1, dirty_flag=0 [ 2.730064@2] blockN=45, ec=-1, dirty_flag=0 [ 2.734290@2] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.739379@2] nddr valid addr: fffffffffffc0000 [ 2.743865@2] aml_nand_ddr_check 1281 NO ddr exist [ 2.748611@2] tpl: off 16777216, size 8388608 [ 2.814885@2] Creating 7 MTD partitions on "nandnormal": [ 2.814915@2] 0x000001000000-0x000001800000 : "tpl" [ 2.821884@0] 0x000001800000-0x000001a00000 : "misc" [ 2.825739@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.830655@0] 0x000001c00000-0x000002c00000 : "recovery" [ 2.837702@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.842455@0] 0x000003b00000-0x000015300000 : "system" [ 2.881414@0] 0x000015300000-0x000020000000 : "data" [ 2.904660@0] nandnormal initialized ok [ 2.904741@0] aml_ubootenv_init: register env chardev [ 2.908110@0] aml_ubootenv_init: register env chardev OK [ 2.913328@0] amlnf_dtb_init: register dtb cdev [ 2.917873@0] amlnf_dtb_init: register dtd cdev OK [ 2.922395@0] mtd_nand_probe 267 , err = 0 [ 2.927127@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.932720@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.939536@0] unifykey: storage in base: 0xffffffc005000000 [ 2.944471@0] unifykey: storage out base: 0xffffffc005040000 [ 2.950059@0] unifykey: storage block base: 0xffffffc005080000 [ 2.955832@0] unifykey: probe done! [ 2.959749@0] unifykey: no efuse-version set, use default value: -1 [ 2.965500@0] unifykey: key unify config unifykey-num is 6 [ 2.970967@0] unifykey: key unify fact unifykey-num is 6 [ 2.976190@0] unifykey: unifykey_devno: ee00000 [ 2.980950@0] unifykey: device unifykeys created ok [ 2.985598@0] unifykey: aml_unifykeys_init done! [ 2.990365@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.996723@0] amlkaraoke init success! [ 2.999879@0] sysled: module init [ 3.003225@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.008211@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.015323@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.021862@2] amlogic rfkill init [ 3.026487@2] dmc_monitor_probe [ 3.028300@2] page_trace_module_init, create sysfs failed [ 3.033908@2] defendkey defendkey: Reserved memory is not enough! [ 3.039442@2] defendkey: probe of defendkey failed with error -22 [ 3.046418@2] usbcore: registered new interface driver snd-usb-audio [ 3.055541@2] asoc debug: aml_audio_controller_probe-130 [ 3.057592@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.062843@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.070633@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.077803@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.084208@2] aml_tdm_platform_probe(), share en = 1[ 3.088923@2] No channel mask node Channel_Mask [ 3.093709@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.099232@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.107188@2] aml_tdm_platform_probe(), share en = 1[ 3.111694@2] No channel mask node Channel_Mask [ 3.116458@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.122005@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.129941@2] aml_tdm_platform_probe(), share en = 1[ 3.134459@2] No channel mask node Channel_Mask [ 3.140133@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.147112@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.155189@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.165143@2] Register vad [ 3.166243@2] check whether to update sound card init data [ 3.172114@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.179064@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.186390@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.191994@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.199668@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.206992@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.212869@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.219351@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.226380@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.232401@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.239303@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.245110@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.251851@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.259539@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.266651@2] snd_card_add_kcontrols card:ffffffc01c94a818 [ 3.271720@2] effect_v2 is not init [ 3.275126@2] Failed to add VAD controls [ 3.279416@2] GACT probability NOT on [ 3.282673@2] Mirror/redirect action on [ 3.286452@2] u32 classifier [ 3.289276@2] Actions configured [ 3.292820@2] Netfilter messages via NETLINK v0.30. [ 3.297899@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.304102@2] ctnetlink v0.93: registering with nfnetlink. [ 3.309810@3] xt_time: kernel timezone is -0000 [ 3.313800@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.319982@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.324998@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.330564@3] Initializing XFRM netlink socket [ 3.335591@3] NET: Registered protocol family 10 [ 3.340713@3] mip6: Mobile IPv6 [ 3.342601@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.348438@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.355442@3] NET: Registered protocol family 17 [ 3.358764@3] NET: Registered protocol family 15 [ 3.363325@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.376431@3] Bluetooth: RFCOMM TTY layer initialized [ 3.381326@3] Bluetooth: RFCOMM socket layer initialized [ 3.386600@3] Bluetooth: RFCOMM ver 1.11 [ 3.390461@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.395880@3] Bluetooth: BNEP filters: protocol multicast [ 3.401239@3] Bluetooth: BNEP socket layer initialized [ 3.406316@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.412364@3] Bluetooth: HIDP socket layer initialized [ 3.417522@3] l2tp_core: L2TP core driver, V2.0 [ 3.421941@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.426846@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.432571@3] l2tp_netlink: L2TP netlink interface [ 3.437350@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.443350@3] l2tp_debugfs: L2TP debugfs support [ 3.447890@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.454492@3] NET: Registered protocol family 35 [ 3.459255@3] Key type dns_resolver registered [ 3.464447@3] Registered swp emulation handler [ 3.467835@3] Registered cp15_barrier emulation handler [ 3.472998@3] Registered setend emulation handler [ 3.477710@3] disable EAS feature [ 3.481739@1] registered taskstats version 1 [ 3.494630@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.000880@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.000938@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.009111@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.017547@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.024432@2] hub 1-0:1.0: USB hub found [ 4.027425@2] hub 1-0:1.0: 1 port detected [ 4.031834@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.037093@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.044883@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.053809@3] hub 2-0:1.0: USB hub found [ 4.056947@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.064235@3] usb usb2: Unsupported the hub [ 4.068701@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.076770@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.185468@2] dwc_otg: Core Release: 3.10a [ 4.185507@2] dwc_otg: Setting default values for core params [ 4.189670@2] dwc_otg: curmode: 0, host_only: 0 [ 4.206458@2] dwc_otg: Using Buffer DMA mode [ 4.206480@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.210365@2] dwc_otg: Working on port type = SLAVE [ 4.215198@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.222266@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.231842@2] gxbb_pm: enter meson_pm_probe! [ 4.231880@2] no vddio3v3_en pin[ 4.233523@2] pm-meson aml_pm: Can't get switch_clk81 [ 4.238566@2] gxbb_pm: meson_pm_probe done [ 4.24293[ 4.249208@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.254636@2] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.464683@1] ubi0: attaching mtd6 [ 4.992908@1] ubi0: scanning is finished [ 4.997066@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.997351@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.004362@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.011248@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.018312@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.024526@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.031880@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.041087@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.050495@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.056452@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.101214@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.103146@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.113202@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.123938@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.129888@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.309305@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.367334@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.455777@1] ubi1: attaching mtd7 [ 5.782057@1] ubi1: scanning is finished [ 5.785900@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.786055@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.793066@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.799952@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.807017@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.813145@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.820472@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.829704@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.839031@1] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.848460@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.872160@3] UBIFS (ubi1:0): recovery needed [ 5.963567@1] UBIFS (ubi1:0): recovery completed [ 5.963740@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.969920@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.979915@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.990608@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.997340@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: OK skip network Init because /sys/class/net/eth0 is not exist -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd li[ 7.015774@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.021440@1] cpufreq_interactive: no need to active hmp boost! ne arg set inputdevice to hw:0,1 cmd line arg set outputdevic[ 7.035263@0] aml_tdm_open e to hw:0,2 AudioStream init success AudioStream_open pid:2[ 7.043502@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.046580@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.048142@0] aml_tdm_open [ 7.048146@0] Not init audio effects 125, tid:f2e66450 --- 0 Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.144193@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.147811@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.154163@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.202670@1] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 [ 8.687852@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones OK reboot Failed to open gpio value for reading! bypass gpio changed = -1 The system is going down NOW! Sent SIGTERM to all processes [ 13.284267@0] asoc-aml-card auge_sound: tdm playback stop [ 13.284594@0] asoc-aml-card auge_sound: tdm capture stop [ 13.289622@0] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.283546@2] mtd_nand_reboot_notifier 35 [ 15.284005@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.292201@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.295420@2] usb usb2: USB disconnect, device number 1 [ 15.305366@2] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.306209@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.311433@2] usb usb1: USB disconnect, device number 1 [ 15.317431@1] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.339593@0] reboot: Restarting system [ 15.339703@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21793 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015876 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974809 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016839@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129128@0] ftrace: allocating 43519 entries in 170 pages [ 0.209549@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210360@0] CPU0: update cpu_capacity 1024 [ 0.214687@0] ASID allocator initialised with 32768 entries [ 0.252674@0] secmon: can't fine clear_range [ 0.253246@0] EFI services will not be available. [ 0.256103@0] Meson chip version = RevC (25:C - 43:0) [ 0.290032@1] Detected VIPT I-cache on CPU1 [ 0.290095@1] CPU1: update cpu_capacity 1024 [ 0.290097@1] CPU1: Booted secondary processor [410fd034] [ 0.318082@2] Detected VIPT I-cache on CPU2 [ 0.318136@2] CPU2: update cpu_capacity 1024 [ 0.318138@2] CPU2: Booted secondary processor [410fd034] [ 0.346148@3] Detected VIPT I-cache on CPU3 [ 0.346198@3] CPU3: update cpu_capacity 1024 [ 0.346200@3] CPU3: Booted secondary processor [410fd034] [ 0.346290@0] Brought up 4 CPUs [ 0.385508@0] SMP: Total of 4 processors activated. [ 0.390418@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396453@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407411@0] CPU: All CPU(s) started at EL2 [ 0.408192@0] alternatives: patching kernel code [ 0.413596@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420733@0] devtmpfs: initialized [ 0.436180@0] DMI not present or invalid. [ 0.436563@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444562@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451119@0] pinctrl core: initialized pinctrl subsystem [ 0.457729@0] NET: Registered protocol family 16 [ 0.477052@0] cpuidle: using governor menu [ 0.477199@0] register canvas platform driver [ 0.479918@0] register rdma platform driver [ 0.485376@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491739@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499225@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505362@0] clkmsr: clkmsr: driver init [ 0.509058@0] codec_mm_module_init [ 0.512491@0] media_configs_system_init [ 0.516626@0] aml_watch_point_probe, in, wp:2 [ 0.522147@0] pstore: using zlib compression [ 0.525548@0] console [pstore-1] enabled [ 0.528877@0] pstore: Registered ramoops as persistent store backend [ 0.535292@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549319@0] aml_iomap: amlogic iomap probe done [ 0.553958@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555919@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564876@0] audio_clocks: audio_clocks_probe done [ 0.573442@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573498@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578667@0] amlogic auge_snd_iomap probe done [ 0.869973@3] vgaarb: loaded [ 0.870381@3] SCSI subsystem initialized [ 0.871475@3] usbcore: registered new interface driver usbfs [ 0.876968@3] usbcore: registered new interface driver hub [ 0.882500@3] usbcore: registered new device driver usb [ 0.887747@3] Linux video capture interface: v2.00 [ 0.892519@3] pps_core: LinuxPPS API ver. 1 registered [ 0.897584@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.906978@3] PTP clock support registered [ 0.911476@3] dmi: Firmware registration failed. [ 0.916152@3] secmon: reserve_mem_size:0x300000 [ 0.920317@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.927230@3] secmon: get page:ffffffbf00140000, 5000 [ 0.931979@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.940363@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.947090@3] fb: osd_init_module [ 0.951589@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.957165@3] Bluetooth: Core ver 2.22 [ 0.960277@3] NET: Registered protocol family 31 [ 0.964881@3] Bluetooth: HCI device and connection manager initialized [ 0.971435@3] Bluetooth: HCI socket layer initialized [ 0.976504@3] Bluetooth: L2CAP socket layer initialized [ 0.981792@3] Bluetooth: SCO socket layer initialized [ 0.987361@3] NetLabel: Initializing [ 0.990401@3] NetLabel: domain hash size = 128 [ 0.995038@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.000198@3] NetLabel: unlabeled traffic allowed by default [ 1.007583@3] clocksource: Switched to clocksource arch_sys_counter [ 1.108167@3] VFS: Disk quotas dquot_6.6.0 [ 1.108267@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.126899@1] NET: Registered protocol family 2 [ 1.127656@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.133125@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.139771@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.146355@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.152331@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.158989@1] NET: Registered protocol family 1 [ 1.163868@1] RPC: Registered named UNIX socket transport module. [ 1.169467@1] RPC: Registered udp transport module. [ 1.174354@1] RPC: Registered tcp transport module. [ 1.179254@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.187346@1] Unpacking initramfs... [ 1.288776@1] Freeing initrd memory: 2308K [ 1.290171@1] hw perfevents: clusterb_enabled = 0 [ 1.292112@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.296484@1] hw perfevents: cluster A irq = 7 [ 1.301004@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.310379@1] audit: initializing netlink subsys (disabled) [ 1.314532@1] audit: type=2000 audit(1.124:1): initialized [ 1.321171@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.342103@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.348143@1] NFS: Registering the id_resolver key type [ 1.348209@1] Key type id_resolver registered [ 1.352136@1] Key type id_legacy registered [ 1.356636@1] fuse init (API version 7.26) [ 1.365209@1] NET: Registered protocol family 38 [ 1.365254@1] Key type asymmetric registered [ 1.369368@1] Asymmetric key parser 'x509' registered [ 1.374709@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.382067@1] io scheduler noop registered (default) [ 1.387048@1] io scheduler deadline registered [ 1.391732@1] io scheduler cfq registered [ 1.406402@3] random: fast init done [ 1.406470@3] random: crng init done [ 1.406992@1] Unable to detect cache hierarchy for CPU 0 [ 1.439504@1] loop: module loaded [ 1.440517@1] zram: Added device: zram0 [ 1.441442@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.448671@1] libphy: Fixed MDIO Bus: probed [ 1.452505@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.457233@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.464831@1] PPP generic driver version 2.4.2 [ 1.468374@1] PPP BSD Compression module registered [ 1.472984@1] PPP Deflate Compression module registered [ 1.478232@1] PPP MPPE Compression module registered [ 1.483204@1] NET: Registered protocol family 24 [ 1.487991@1] usbcore: registered new interface driver asix [ 1.493567@1] usbcore: registered new interface driver ax88179_178a [ 1.499828@1] usbcore: registered new interface driver cdc_ether [ 1.505871@1] usbcore: registered new interface driver net1080 [ 1.511719@1] usbcore: registered new interface driver cdc_subset [ 1.517840@1] usbcore: registered new interface driver zaurus [ 1.523650@1] usbcore: registered new interface driver cdc_ncm [ 1.530094@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.536165@1] ehci-pci: EHCI PCI platform driver [ 1.540902@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.547239@1] ohci-pci: OHCI PCI platform driver [ 1.552400@1] usbcore: registered new interface driver cdc_acm [ 1.557689@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.565995@1] usbcore: registered new interface driver usb-storage [ 1.572257@1] usbcore: registered new interface driver usbserial [ 1.578738@1] mousedev: PS/2 mouse device common for all mice [ 1.584316@1] usbcore: registered new interface driver xpad [ 1.589751@1] i2c /dev entries driver [ 1.593354@1] usbcore: registered new interface driver uvcvideo [ 1.599153@1] USB Video Class driver (1.1.1) [ 1.603425@1] md: linear personality registered for level -1 [ 1.609622@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.619227@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.625106@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.632894@0] usbcore: registered new interface driver usbhid [ 1.636783@0] usbhid: USB HID core driver [ 1.641039@1] ashmem: initialized [ 1.644525@0] logger: created 512K log 'log_main' [ 1.649039@1] logger: created 1K log 'log_events' [ 1.653791@1] logger: created 1K log 'log_radio' [ 1.658388@0] logger: created 16K log 'log_system' [ 1.663031@0] exFAT: Version 1.3.0 [ 1.668335@0] ff803000.serial: clock gate not found [ 1.671367@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.678574@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.693538@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.696125@0] console [ttyS0] enabled [ 1.696125@0] console [ttyS0] enabled [ 1.703329@0] bootconsole [aml_uart0] disabled [ 1.703329@0] bootconsole [aml_uart0] disabled [ 1.712849@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.719284@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.729565@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.739386@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.745885@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.758311@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.762397@1] irq = 20 [ 1.764724@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.773497@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.777937@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.783166@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.789641@1] meson-remote: Driver init [ 1.793608@1] meson-remote: remote_probe [ 1.797199@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.802260@1] meson-remote ff808040.rc: don't find the node [ 1.808829@1] meson-remote ff808040.rc: led_blink = 0 [ 1.813816@1] meson-remote ff808040.rc: don't find the node [ 1.820715@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.826364@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.832060@1] meson-remote ff808040.rc: custom_number = 3 [ 1.837382@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.843057@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.850215@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.856510@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.862655@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.868326@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.875488@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.881781@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.887925@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.893598@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.900755@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.907052@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.913181@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.919904@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.925681@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.931460@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.937152@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.942845@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.948796@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.954661@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.960267@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.965615@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.970962@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.976971@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.983971@0] meson-remote: IR XMP protocol handler initialized [ 1.989619@0] efusekeynum: 4 [ 1.992127@0] efusekeyname: mac offset: 0 size: 6 [ 1.998493@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.004869@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.011254@0] efusekeyname: usid offset: 18 size: 16 [ 2.017911@1] efuse efuse: probe OK! [ 2.023491@0] ge2d: ge2d_init_module [ 2.025291@0] [tsync_pcr_init]init success. [ 2.029749@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.036258@0] DI: di_module_init ok. [ 2.039299@0] dim:dim_module_init [ 2.042618@0] dim:dim_module_init finish [ 2.046276@0] dil:dil_init. [ 2.049251@0] dil:dil_init ok. [ 2.052102@0] vdin_drv_init: major 241 [ 2.056016@0] vdin_drv_init: vdin driver init done [ 2.060508@0] [viuin..]viuin_init_module viuin module init [ 2.066335@0] [viuin..]viuin_probe probe ok. [ 2.070419@0] amlvid:info: amlvideo_init called[ 2.074478@0] amlvid:info: amlvideo_create_instance called [ 2.079938@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.085257@3] amlvideo-000: V4L2 device registered as video10 [ 2.090713@3] amlvid:info: amlvideo_create_instance called [ 2.096123@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.101420@1] amlvideo-001: V4L2 device registered as video23 [ 2.107194@1] PPMGRDRV: warn: ppmgr module init func called [ 2.113400@2] videosync_create_instance dev_s ffffffc01c954800,dev_s->dev ffffffc01dab6480 [ 2.120629@2] videosync_create_instance reg videosync.0 [ 2.125880@2] aml_vecm_init:module init [ 2.125881@1] videosync_thread started [ 2.133611@2] amdolby_vision_init:module init [ 2.137905@2] prime_sl module init [ 2.141520@2] amlogic mtd driver init [ 2.145241@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.150453@2] bl mode descrete [ 2.153393@2] fip_copies 4 [ 2.156055@2] fip_size 0x200000 [ 2.159151@2] nand_clk_ctrl 0xffe07000 [ 2.162867@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.168498@2] nand_clk_ctrl 0xffe07000 [ 2.172198@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.180530@2] plat->aml_nand_device ffffff800a778cf8 [ 2.185055@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.191024@2] NAND device id: c2 dc 90 a2 57 3 [ 2.195217@2] NAND device: Manufacturer ID: [ 2.199266@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.205927@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.211431@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.216950@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.223251@2] mtd->oobavail: 0x10 [ 2.227182@1] aml_nand_init 2119: plat-name:bootloader [ 2.231630@1] Creating 1 MTD partitions on "bootloader": [ 2.236877@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.244469@1] bootloader initialized ok [ 2.246100@1] plat->aml_nand_device ffffff800a778cf8 [ 2.251040@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.257066@1] NAND device id: c2 dc 90 a2 57 3 [ 2.261201@1] NAND device: Manufacturer ID: [ 2.265253@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.271907@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.277411@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.282929@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.289235@1] mtd->oobavail: 0x10 [ 2.292675@1] aml_nand_init 2119: plat-name:nandnormal [ 2.297623@1] bbt_start=20 [ 2.300266@1] env_start=24 [ 2.302929@1] key_start=32 [ 2.305611@1] dtb_start=40 [ 2.308284@1] ddr_start=44 [ 2.310952@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.317443@1] get_free_node 43: bitmap=0 [ 2.320879@1] get_free_node 55: bitmap=1 [ 2.324963@1] get_free_node 43: bitmap=1 [ 2.328640@1] get_free_node 55: bitmap=3 [ 2.332724@1] get_free_node 43: bitmap=3 [ 2.336403@1] get_free_node 55: bitmap=7 [ 2.340284@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.346924@1] nbbt free list: [ 2.349857@1] blockN=21, ec=-1, dirty_flag=0 [ 2.354083@1] blockN=22, ec=-1, dirty_flag=0 [ 2.358315@1] blockN=23, ec=-1, dirty_flag=0 [ 2.362537@1] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.367953@1] nbbt valid addr: 500000 [ 2.371154@1] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.376769@1] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.383009@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.389420@1] get_free_node 43: bitmap=7 [ 2.392896@1] get_free_node 55: bitmap=f [ 2.396980@1] get_free_node 43: bitmap=f [ 2.400659@1] get_free_node 55: bitmap=1f [ 2.404829@1] get_free_node 43: bitmap=1f [ 2.408601@1] get_free_node 55: bitmap=3f [ 2.412765@1] get_free_node 43: bitmap=3f [ 2.416529@1] get_free_node 55: bitmap=7f [ 2.420699@1] get_free_node 43: bitmap=7f [ 2.424463@1] get_free_node 55: bitmap=ff [ 2.428635@1] get_free_node 43: bitmap=ff [ 2.432399@1] get_free_node 55: bitmap=1ff [ 2.436655@1] get_free_node 43: bitmap=1ff [ 2.440506@1] get_free_node 55: bitmap=3ff [ 2.444559@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.451200@1] nenv free list: [ 2.454133@1] blockN=25, ec=-1, dirty_flag=0 [ 2.458359@1] blockN=26, ec=-1, dirty_flag=0 [ 2.462585@1] blockN=27, ec=-1, dirty_flag=0 [ 2.466812@1] blockN=28, ec=-1, dirty_flag=0 [ 2.471038@1] blockN=29, ec=-1, dirty_flag=0 [ 2.475264@1] blockN=30, ec=-1, dirty_flag=0 [ 2.479491@1] blockN=31, ec=-1, dirty_flag=0 [ 2.483717@1] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.495453@1] nenv valid addr: 610000 [ 2.495472@1] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.499903@1] get_free_node 43: bitmap=3ff [ 2.503754@1] get_free_node 55: bitmap=7ff [ 2.508010@1] get_free_node 43: bitmap=7ff [ 2.511861@1] get_free_node 55: bitmap=fff [ 2.516117@1] get_free_node 43: bitmap=fff [ 2.519969@1] get_free_node 55: bitmap=1fff [ 2.524311@1] get_free_node 43: bitmap=1fff [ 2.528249@1] get_free_node 55: bitmap=3fff [ 2.532591@1] get_free_node 43: bitmap=3fff [ 2.536529@1] get_free_node 55: bitmap=7fff [ 2.540872@1] get_free_node 43: bitmap=7fff [ 2.544809@1] get_free_node 55: bitmap=ffff [ 2.549151@1] get_free_node 43: bitmap=ffff [ 2.553089@1] get_free_node 55: bitmap=1ffff [ 2.557517@1] get_free_node 43: bitmap=1ffff [ 2.561541@1] get_free_node 55: bitmap=3ffff [ 2.565767@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.572407@1] nkey free list: [ 2.575332@1] blockN=32, ec=-1, dirty_flag=0 [ 2.579567@1] blockN=33, ec=-1, dirty_flag=0 [ 2.583793@1] blockN=34, ec=-1, dirty_flag=0 [ 2.588019@1] blockN=35, ec=-1, dirty_flag=0 [ 2.592245@1] blockN=36, ec=-1, dirty_flag=0 [ 2.596471@1] blockN=37, ec=-1, dirty_flag=0 [ 2.600698@1] blockN=38, ec=-1, dirty_flag=0 [ 2.604924@1] blockN=39, ec=-1, dirty_flag=0 [ 2.609150@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.614239@1] nkey valid addr: fffffffffffc0000 [ 2.618729@1] aml_nand_key_check 1251 NO key exist [ 2.623469@1] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.630084@1] get_free_node 43: bitmap=3ffff [ 2.633905@1] get_free_node 55: bitmap=7ffff [ 2.638333@1] get_free_node 43: bitmap=7ffff [ 2.642357@1] get_free_node 55: bitmap=fffff [ 2.646786@1] get_free_node 43: bitmap=fffff [ 2.650809@1] get_free_node 55: bitmap=1fffff [ 2.655134@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.661763@1] ndtb free list: [ 2.664699@1] blockN=41, ec=-1, dirty_flag=0 [ 2.668922@1] blockN=42, ec=-1, dirty_flag=0 [ 2.673148@1] blockN=43, ec=-1, dirty_flag=0 [ 2.677374@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.695370@1] ndtb valid addr: a00000 [ 2.695389@1] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.699822@1] get_free_node 43: bitmap=1fffff [ 2.703931@1] get_free_node 55: bitmap=3fffff [ 2.708446@1] get_free_node 43: bitmap=3fffff [ 2.712556@1] get_free_node 55: bitmap=7fffff [ 2.716869@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.723508@1] nddr free list: [ 2.726441@1] blockN=44, ec=-1, dirty_flag=0 [ 2.730667@1] blockN=45, ec=-1, dirty_flag=0 [ 2.734894@1] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.739983@1] nddr valid addr: fffffffffffc0000 [ 2.744468@1] aml_nand_ddr_check 1281 NO ddr exist [ 2.749214@1] tpl: off 16777216, size 8388608 [ 2.815521@1] Creating 7 MTD partitions on "nandnormal": [ 2.815551@1] 0x000001000000-0x000001800000 : "tpl" [ 2.822560@2] 0x000001800000-0x000001a00000 : "misc" [ 2.826433@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.831248@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.838357@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.843092@3] 0x000003b00000-0x000015300000 : "system" [ 2.882023@3] 0x000015300000-0x000020000000 : "data" [ 2.905261@3] nandnormal initialized ok [ 2.905343@3] aml_ubootenv_init: register env chardev [ 2.908703@3] aml_ubootenv_init: register env chardev OK [ 2.913934@3] amlnf_dtb_init: register dtb cdev [ 2.918438@3] amlnf_dtb_init: register dtd cdev OK [ 2.922996@3] mtd_nand_probe 267 , err = 0 [ 2.927738@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.933331@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.940133@3] unifykey: storage in base: 0xffffffc005000000 [ 2.945075@3] unifykey: storage out base: 0xffffffc005040000 [ 2.950664@3] unifykey: storage block base: 0xffffffc005080000 [ 2.956436@3] unifykey: probe done! [ 2.960333@3] unifykey: no efuse-version set, use default value: -1 [ 2.966116@3] unifykey: key unify config unifykey-num is 6 [ 2.971580@3] unifykey: key unify fact unifykey-num is 6 [ 2.976795@3] unifykey: unifykey_devno: ee00000 [ 2.981564@3] unifykey: device unifykeys created ok [ 2.986192@3] unifykey: aml_unifykeys_init done! [ 2.990961@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.997317@3] amlkaraoke init success! [ 3.000468@3] sysled: module init [ 3.003906@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.008819@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.015944@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.022467@3] amlogic rfkill init [ 3.027135@3] dmc_monitor_probe [ 3.028886@3] page_trace_module_init, create sysfs failed [ 3.042542@3] defendkey defendkey: Reserved memory is not enough! [ 3.043015@3] defendkey: probe of defendkey failed with error -22 [ 3.050020@3] usbcore: registered new interface driver snd-usb-audio [ 3.059242@3] asoc debug: aml_audio_controller_probe-130 [ 3.061149@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.066439@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.074230@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.081410@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.087774@3] aml_tdm_platform_probe(), share en = 1[ 3.092519@3] No channel mask node Channel_Mask [ 3.097281@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.102832@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.110798@3] aml_tdm_platform_probe(), share en = 1[ 3.115294@3] No channel mask node Channel_Mask [ 3.120039@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.125601@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.133535@3] aml_tdm_platform_probe(), share en = 1[ 3.138057@3] No channel mask node Channel_Mask [ 3.143694@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.150688@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.158793@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.168778@3] Register vad [ 3.169841@3] check whether to update sound card init data [ 3.175709@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.182666@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.189977@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.195592@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.203261@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.210597@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.216463@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.222952@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.229990@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.235998@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.242924@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.248709@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.255440@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.264023@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.270283@1] snd_card_add_kcontrols card:ffffffc01c9fd018 [ 3.275314@1] effect_v2 is not init [ 3.278734@1] Failed to add VAD controls [ 3.282976@1] GACT probability NOT on [ 3.286278@1] Mirror/redirect action on [ 3.290040@1] u32 classifier [ 3.292871@1] Actions configured [ 3.296417@1] Netfilter messages via NETLINK v0.30. [ 3.301505@1] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.307711@1] ctnetlink v0.93: registering with nfnetlink. [ 3.313404@2] xt_time: kernel timezone is -0000 [ 3.317395@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.323606@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.328561@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.334157@2] Initializing XFRM netlink socket [ 3.339160@2] NET: Registered protocol family 10 [ 3.344385@2] mip6: Mobile IPv6 [ 3.346197@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.352040@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.359037@2] NET: Registered protocol family 17 [ 3.362368@2] NET: Registered protocol family 15 [ 3.366925@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.380050@2] Bluetooth: RFCOMM TTY layer initialized [ 3.384923@2] Bluetooth: RFCOMM socket layer initialized [ 3.390196@2] Bluetooth: RFCOMM ver 1.11 [ 3.394055@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.399478@2] Bluetooth: BNEP filters: protocol multicast [ 3.404831@2] Bluetooth: BNEP socket layer initialized [ 3.409919@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.415957@2] Bluetooth: HIDP socket layer initialized [ 3.421129@2] l2tp_core: L2TP core driver, V2.0 [ 3.425537@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.430445@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.436169@2] l2tp_netlink: L2TP netlink interface [ 3.440927@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.446944@2] l2tp_debugfs: L2TP debugfs support [ 3.451490@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.458088@2] NET: Registered protocol family 35 [ 3.462850@2] Key type dns_resolver registered [ 3.468045@2] Registered swp emulation handler [ 3.471414@2] Registered cp15_barrier emulation handler [ 3.476600@2] Registered setend emulation handler [ 3.481316@2] disable EAS feature [ 3.485324@1] registered taskstats version 1 [ 3.498196@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.004453@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.004512@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.012675@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.021129@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.028095@1] hub 1-0:1.0: USB hub found [ 4.031006@1] hub 1-0:1.0: 1 port detected [ 4.035383@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.040658@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.048459@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.057374@2] hub 2-0:1.0: USB hub found [ 4.060545@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.067822@2] usb usb2: Unsupported the hub [ 4.072350@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.080358@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.189030@1] dwc_otg: Core Release: 3.10a [ 4.189070@1] dwc_otg: Setting default values for core params [ 4.193235@1] dwc_otg: curmode: 0, host_only: 0 [ 4.210023@1] dwc_otg: Using Buffer DMA mode [ 4.210046@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.213928@1] dwc_otg: Working on port type = SLAVE [ 4.218760@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.225841@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.235355@1] gxbb_pm: enter meson_pm_probe! [ 4.235395@1] no vddio3v3_en pin[ 4.237066@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.242072@1] gxbb_pm: meson_pm_probe done [ 4.24644U 4.252735@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.258126@1] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.467551@2] ubi0: attaching mtd6 [ 4.996025@2] ubi0: scanning is finished [ 5.000292@1] ubi0: attached mtd6 (name "system", size 280 MiB) [ 5.000577@1] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.007588@1] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.014474@1] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.021591@1] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.027753@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.035083@1] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.044313@1] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.053722@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.059495@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.104329@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.106260@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.116303@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.127051@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.133002@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.315884@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.376873@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.461917@1] ubi1: attaching mtd7 [ 5.788684@1] ubi1: scanning is finished [ 5.792604@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.792735@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.799732@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.806618@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.813684@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.819812@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.827139@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.836371@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.845694@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.855006@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.878696@2] UBIFS (ubi1:0): recovery needed [ 5.931755@2] UBIFS (ubi1:0): recovery completed [ 5.931913@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.938094@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.948091@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.958783@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.965513@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bb0450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.994121@3] aml_tdm_open [ 7.003852@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.003891@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.010389@3] aml_tdm_open [ 7.012147@3] Not init audio effects Opened TCP tunin[ 7.017516@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.023405@2] cpufreq_interactive: no need to active hmp boost! g interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.110392@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.114048@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B Th[ 7.120260@2] asoc-aml-card auge_sound: tdm capture enable e layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.169227@2] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 [ 8.648120@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones OK AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22019 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 01 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015880 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1977094 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081292@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129130@0] ftrace: allocating 43519 entries in 170 pages [ 0.209462@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210273@0] CPU0: update cpu_capacity 1024 [ 0.214600@0] ASID allocator initialised with 32768 entries [ 0.252574@0] secmon: can't fine clear_range [ 0.253163@0] EFI services will not be available. [ 0.256010@0] Meson chip version = RevC (25:C - 43:0) [ 0.289941@1] Detected VIPT I-cache on CPU1 [ 0.290004@1] CPU1: update cpu_capacity 1024 [ 0.290007@1] CPU1: Booted secondary processor [410fd034] [ 0.317978@2] Detected VIPT I-cache on CPU2 [ 0.318031@2] CPU2: update cpu_capacity 1024 [ 0.318034@2] CPU2: Booted secondary processor [410fd034] [ 0.346059@3] Detected VIPT I-cache on CPU3 [ 0.346108@3] CPU3: update cpu_capacity 1024 [ 0.346110@3] CPU3: Booted secondary processor [410fd034] [ 0.346202@0] Brought up 4 CPUs [ 0.385420@0] SMP: Total of 4 processors activated. [ 0.390330@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396365@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407330@0] CPU: All CPU(s) started at EL2 [ 0.408104@0] alternatives: patching kernel code [ 0.413513@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420642@0] devtmpfs: initialized [ 0.436065@0] DMI not present or invalid. [ 0.436453@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444448@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451006@0] pinctrl core: initialized pinctrl subsystem [ 0.457569@0] NET: Registered protocol family 16 [ 0.476951@0] cpuidle: using governor menu [ 0.477098@0] register canvas platform driver [ 0.479813@0] register rdma platform driver [ 0.485268@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491642@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499116@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505233@0] clkmsr: clkmsr: driver init [ 0.508953@0] codec_mm_module_init [ 0.512387@0] media_configs_system_init [ 0.516522@0] aml_watch_point_probe, in, wp:2 [ 0.521178@0] pstore: using zlib compression [ 0.525444@0] console [pstore-1] enabled [ 0.528773@0] pstore: Registered ramoops as persistent store backend [ 0.535188@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549216@0] aml_iomap: amlogic iomap probe done [ 0.553913@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555813@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564821@0] audio_clocks: audio_clocks_probe done [ 0.573403@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573459@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578625@0] amlogic auge_snd_iomap probe done [ 0.869911@1] vgaarb: loaded [ 0.870310@1] SCSI subsystem initialized [ 0.871419@1] usbcore: registered new interface driver usbfs [ 0.876886@1] usbcore: registered new interface driver hub [ 0.882436@1] usbcore: registered new device driver usb [ 0.887736@1] Linux video capture interface: v2.00 [ 0.892458@1] pps_core: LinuxPPS API ver. 1 registered [ 0.897523@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.906915@1] PTP clock support registered [ 0.915230@1] dmi: Firmware registration failed. [ 0.916050@1] secmon: reserve_mem_size:0x300000 [ 0.920256@1] secmon secmon: assigned reserved memory node linux,secmon [ 0.927159@1] secmon: get page:ffffffbf00140000, 5000 [ 0.931911@1] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.940301@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.947036@1] fb: osd_init_module [ 0.951532@1] Advanced Linux Sound Architecture Driver Initialized. [ 0.957098@1] Bluetooth: Core ver 2.22 [ 0.960217@1] NET: Registered protocol family 31 [ 0.964820@1] Bluetooth: HCI device and connection manager initialized [ 0.971376@1] Bluetooth: HCI socket layer initialized [ 0.976439@1] Bluetooth: L2CAP socket layer initialized [ 0.981732@1] Bluetooth: SCO socket layer initialized [ 0.987299@1] NetLabel: Initializing [ 0.990341@1] NetLabel: domain hash size = 128 [ 0.994984@1] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.000134@1] NetLabel: unlabeled traffic allowed by default [ 1.007606@3] clocksource: Switched to clocksource arch_sys_counter [ 1.108065@3] VFS: Disk quotas dquot_6.6.0 [ 1.108175@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.126357@3] NET: Registered protocol family 2 [ 1.127080@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.132581@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.139294@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.145805@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.151803@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.158451@3] NET: Registered protocol family 1 [ 1.163254@3] RPC: Registered named UNIX socket transport module. [ 1.168932@3] RPC: Registered udp transport module. [ 1.173820@3] RPC: Registered tcp transport module. [ 1.178714@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.186794@3] Unpacking initramfs... [ 1.288228@3] Freeing initrd memory: 2308K [ 1.289664@3] hw perfevents: clusterb_enabled = 0 [ 1.291410@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.296091@3] hw perfevents: cluster A irq = 7 [ 1.300466@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.309821@3] audit: initializing netlink subsys (disabled) [ 1.313988@3] audit: type=2000 audit(1.124:1): initialized [ 1.320667@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.341598@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.343522@3] NFS: Registering the id_resolver key type [ 1.347288@3] Key type id_resolver registered [ 1.351615@3] Key type id_legacy registered [ 1.356138@3] fuse init (API version 7.26) [ 1.364653@3] NET: Registered protocol family 38 [ 1.364698@3] Key type asymmetric registered [ 1.368858@3] Asymmetric key parser 'x509' registered [ 1.374215@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.381553@3] io scheduler noop registered (default) [ 1.386526@3] io scheduler deadline registered [ 1.391273@3] io scheduler cfq registered [ 1.405988@1] random: fast init done [ 1.406054@1] random: crng init done [ 1.406585@3] Unable to detect cache hierarchy for CPU 0 [ 1.438791@3] loop: module loaded [ 1.443803@3] zram: Added device: zram0 [ 1.444230@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.449960@3] libphy: Fixed MDIO Bus: probed [ 1.453632@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.458209@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.465784@3] PPP generic driver version 2.4.2 [ 1.469335@3] PPP BSD Compression module registered [ 1.473960@3] PPP Deflate Compression module registered [ 1.479208@3] PPP MPPE Compression module registered [ 1.484179@3] NET: Registered protocol family 24 [ 1.488960@3] usbcore: registered new interface driver asix [ 1.494559@3] usbcore: registered new interface driver ax88179_178a [ 1.500823@3] usbcore: registered new interface driver cdc_ether [ 1.506837@3] usbcore: registered new interface driver net1080 [ 1.512696@3] usbcore: registered new interface driver cdc_subset [ 1.518811@3] usbcore: registered new interface driver zaurus [ 1.524634@3] usbcore: registered new interface driver cdc_ncm [ 1.531055@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.537145@3] ehci-pci: EHCI PCI platform driver [ 1.541869@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.548186@3] ohci-pci: OHCI PCI platform driver [ 1.553387@3] usbcore: registered new interface driver cdc_acm [ 1.558667@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.566969@3] usbcore: registered new interface driver usb-storage [ 1.573246@3] usbcore: registered new interface driver usbserial [ 1.579761@3] mousedev: PS/2 mouse device common for all mice [ 1.585288@3] usbcore: registered new interface driver xpad [ 1.590734@3] i2c /dev entries driver [ 1.594356@3] usbcore: registered new interface driver uvcvideo [ 1.600137@3] USB Video Class driver (1.1.1) [ 1.604406@3] md: linear personality registered for level -1 [ 1.610589@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.620278@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.626065@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.633845@2] usbcore: registered new interface driver usbhid [ 1.637772@2] usbhid: USB HID core driver [ 1.642017@0] ashmem: initialized [ 1.645507@2] logger: created 512K log 'log_main' [ 1.650011@0] logger: created 1K log 'log_events' [ 1.654736@2] logger: created 1K log 'log_radio' [ 1.659437@0] logger: created 16K log 'log_system' [ 1.664007@0] exFAT: Version 1.3.0 [ 1.669241@2] ff803000.serial: clock gate not found [ 1.672389@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.679531@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.694517@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.697132@2] console [ttyS0] enabled [ 1.697132@2] console [ttyS0] enabled [ 1.704351@2] bootconsole [aml_uart0] disabled [ 1.704351@2] bootconsole [aml_uart0] disabled [ 1.713832@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.720271@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.730565@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.740374@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.746887@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.759255@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.763365@1] irq = 20 [ 1.765696@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.774466@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.779472@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.784725@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.790611@1] meson-remote: Driver init [ 1.794588@1] meson-remote: remote_probe [ 1.798175@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.803240@1] meson-remote ff808040.rc: don't find the node [ 1.809793@1] meson-remote ff808040.rc: led_blink = 0 [ 1.814802@1] meson-remote ff808040.rc: don't find the node [ 1.821695@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.827339@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.833036@1] meson-remote ff808040.rc: custom_number = 3 [ 1.838362@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.844038@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.851195@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.857490@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.863637@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.869306@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.876464@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.882761@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.888905@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.894578@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.901736@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.908032@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.914160@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.920884@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.926661@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.932440@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.938132@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.943825@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.949776@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.955641@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.961247@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.966595@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.971942@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.978007@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.984932@0] meson-remote: IR XMP protocol handler initialized [ 1.990607@0] efusekeynum: 4 [ 1.993129@0] efusekeyname: mac offset: 0 size: 6 [ 1.999467@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.005849@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.012236@0] efusekeyname: usid offset: 18 size: 16 [ 2.018889@2] efuse efuse: probe OK! [ 2.024735@0] ge2d: ge2d_init_module [ 2.026205@0] [tsync_pcr_init]init success. [ 2.030725@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.037255@0] DI: di_module_init ok. [ 2.040351@0] dim:dim_module_init [ 2.043550@0] dim:dim_module_init finish [ 2.047265@0] dil:dil_init. [ 2.050256@0] dil:dil_init ok. [ 2.053082@0] vdin_drv_init: major 241 [ 2.057002@0] vdin_drv_init: vdin driver init done [ 2.061494@0] [viuin..]viuin_init_module viuin module init [ 2.067327@0] [viuin..]viuin_probe probe ok. [ 2.071399@0] amlvid:info: amlvideo_init called[ 2.075461@0] amlvid:info: amlvideo_create_instance called [ 2.080913@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.086216@1] amlvideo-000: V4L2 device registered as video10 [ 2.091677@1] amlvid:info: amlvideo_create_instance called [ 2.097095@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.102406@3] amlvideo-001: V4L2 device registered as video23 [ 2.108180@3] PPMGRDRV: warn: ppmgr module init func called [ 2.114354@2] videosync_create_instance dev_s ffffffc01c8b6000,dev_s->dev ffffffc01d882c00 [ 2.121622@2] videosync_create_instance reg videosync.0 [ 2.126859@2] aml_vecm_init:module init [ 2.126972@3] videosync_thread started [ 2.134599@2] amdolby_vision_init:module init [ 2.138872@2] prime_sl module init [ 2.142516@2] amlogic mtd driver init [ 2.146227@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.151440@2] bl mode descrete [ 2.154365@2] fip_copies 4 [ 2.157036@2] fip_size 0x200000 [ 2.160140@2] nand_clk_ctrl 0xffe07000 [ 2.163849@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.169478@2] nand_clk_ctrl 0xffe07000 [ 2.173179@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.181498@2] plat->aml_nand_device ffffff800a778cf8 [ 2.186029@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.192006@2] NAND device id: c2 dc 90 a2 57 3 [ 2.196200@2] NAND device: Manufacturer ID: [ 2.200247@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.206907@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.212407@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.217928@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.224231@2] mtd->oobavail: 0x10 [ 2.228133@3] aml_nand_init 2119: plat-name:bootloader [ 2.232611@3] Creating 1 MTD partitions on "bootloader": [ 2.237858@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.245694@3] bootloader initialized ok [ 2.247080@3] plat->aml_nand_device ffffff800a778cf8 [ 2.252023@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.258048@3] NAND device id: c2 dc 90 a2 57 3 [ 2.262181@3] NAND device: Manufacturer ID: [ 2.266233@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.272888@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.278391@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.283909@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.290217@3] mtd->oobavail: 0x10 [ 2.293705@3] aml_nand_init 2119: plat-name:nandnormal [ 2.298598@3] bbt_start=20 [ 2.301244@3] env_start=24 [ 2.303917@3] key_start=32 [ 2.306583@3] dtb_start=40 [ 2.309265@3] ddr_start=44 [ 2.311940@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.318416@3] get_free_node 43: bitmap=0 [ 2.321859@3] get_free_node 55: bitmap=1 [ 2.325942@3] get_free_node 43: bitmap=1 [ 2.329621@3] get_free_node 55: bitmap=3 [ 2.333705@3] get_free_node 43: bitmap=3 [ 2.337383@3] get_free_node 55: bitmap=7 [ 2.341265@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.347904@3] nbbt free list: [ 2.350829@3] blockN=21, ec=-1, dirty_flag=0 [ 2.355063@3] blockN=22, ec=-1, dirty_flag=0 [ 2.359289@3] blockN=23, ec=-1, dirty_flag=0 [ 2.363516@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.368925@3] nbbt valid addr: 500000 [ 2.372143@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.377749@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.383990@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.390400@3] get_free_node 43: bitmap=7 [ 2.393877@3] get_free_node 55: bitmap=f [ 2.397960@3] get_free_node 43: bitmap=f [ 2.401639@3] get_free_node 55: bitmap=1f [ 2.405809@3] get_free_node 43: bitmap=1f [ 2.409574@3] get_free_node 55: bitmap=3f [ 2.413744@3] get_free_node 43: bitmap=3f [ 2.417509@3] get_free_node 55: bitmap=7f [ 2.421679@3] get_free_node 43: bitmap=7f [ 2.425444@3] get_free_node 55: bitmap=ff [ 2.429614@3] get_free_node 43: bitmap=ff [ 2.433379@3] get_free_node 55: bitmap=1ff [ 2.437634@3] get_free_node 43: bitmap=1ff [ 2.441487@3] get_free_node 55: bitmap=3ff [ 2.445540@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.452180@3] nenv free list: [ 2.455106@3] blockN=25, ec=-1, dirty_flag=0 [ 2.459340@3] blockN=26, ec=-1, dirty_flag=0 [ 2.463566@3] blockN=27, ec=-1, dirty_flag=0 [ 2.467792@3] blockN=28, ec=-1, dirty_flag=0 [ 2.472018@3] blockN=29, ec=-1, dirty_flag=0 [ 2.476244@3] blockN=30, ec=-1, dirty_flag=0 [ 2.480471@3] blockN=31, ec=-1, dirty_flag=0 [ 2.484697@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.496445@3] nenv valid addr: 610000 [ 2.496465@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.500900@3] get_free_node 43: bitmap=3ff [ 2.504751@3] get_free_node 55: bitmap=7ff [ 2.509013@3] get_free_node 43: bitmap=7ff [ 2.512859@3] get_free_node 55: bitmap=fff [ 2.517115@3] get_free_node 43: bitmap=fff [ 2.520966@3] get_free_node 55: bitmap=1fff [ 2.525309@3] get_free_node 43: bitmap=1fff [ 2.529246@3] get_free_node 55: bitmap=3fff [ 2.533589@3] get_free_node 43: bitmap=3fff [ 2.537526@3] get_free_node 55: bitmap=7fff [ 2.541869@3] get_free_node 43: bitmap=7fff [ 2.545806@3] get_free_node 55: bitmap=ffff [ 2.550149@3] get_free_node 43: bitmap=ffff [ 2.554086@3] get_free_node 55: bitmap=1ffff [ 2.558515@3] get_free_node 43: bitmap=1ffff [ 2.562539@3] get_free_node 55: bitmap=3ffff [ 2.566765@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.573405@3] nkey free list: [ 2.576338@3] blockN=32, ec=-1, dirty_flag=0 [ 2.580564@3] blockN=33, ec=-1, dirty_flag=0 [ 2.584790@3] blockN=34, ec=-1, dirty_flag=0 [ 2.589015@3] blockN=35, ec=-1, dirty_flag=0 [ 2.593243@3] blockN=36, ec=-1, dirty_flag=0 [ 2.597469@3] blockN=37, ec=-1, dirty_flag=0 [ 2.601695@3] blockN=38, ec=-1, dirty_flag=0 [ 2.605921@3] blockN=39, ec=-1, dirty_flag=0 [ 2.610148@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.615236@3] nkey valid addr: fffffffffffc0000 [ 2.619722@3] aml_nand_key_check 1251 NO key exist [ 2.624466@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.631083@3] get_free_node 43: bitmap=3ffff [ 2.634902@3] get_free_node 55: bitmap=7ffff [ 2.639331@3] get_free_node 43: bitmap=7ffff [ 2.643355@3] get_free_node 55: bitmap=fffff [ 2.647815@3] get_free_node 43: bitmap=fffff [ 2.651817@3] get_free_node 55: bitmap=1fffff [ 2.656121@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.662760@3] ndtb free list: [ 2.665693@3] blockN=41, ec=-1, dirty_flag=0 [ 2.669919@3] blockN=42, ec=-1, dirty_flag=0 [ 2.674145@3] blockN=43, ec=-1, dirty_flag=0 [ 2.678372@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.696374@3] ndtb valid addr: a00000 [ 2.696394@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.700828@3] get_free_node 43: bitmap=1fffff [ 2.704937@3] get_free_node 55: bitmap=3fffff [ 2.709453@3] get_free_node 43: bitmap=3fffff [ 2.713561@3] get_free_node 55: bitmap=7fffff [ 2.717875@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.724515@3] nddr free list: [ 2.727440@3] blockN=44, ec=-1, dirty_flag=0 [ 2.731674@3] blockN=45, ec=-1, dirty_flag=0 [ 2.735900@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.740989@3] nddr valid addr: fffffffffffc0000 [ 2.745475@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.750221@3] tpl: off 16777216, size 8388608 [ 2.816595@3] Creating 7 MTD partitions on "nandnormal": [ 2.816626@3] 0x000001000000-0x000001800000 : "tpl" [ 2.824008@3] 0x000001800000-0x000001a00000 : "misc" [ 2.827536@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.832472@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.839412@0] 0x000002c00000-0x000003b00000 : "boot" [ 2.844210@0] 0x000003b00000-0x000015300000 : "system" [ 2.883254@0] 0x000015300000-0x000020000000 : "data" [ 2.906536@0] nandnormal initialized ok [ 2.906619@0] aml_ubootenv_init: register env chardev [ 2.910000@0] aml_ubootenv_init: register env chardev OK [ 2.915202@0] amlnf_dtb_init: register dtb cdev [ 2.919741@0] amlnf_dtb_init: register dtd cdev OK [ 2.924274@0] mtd_nand_probe 267 , err = 0 [ 2.929013@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.934606@0] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.941408@0] unifykey: storage in base: 0xffffffc005000000 [ 2.946359@0] unifykey: storage out base: 0xffffffc005040000 [ 2.951936@0] unifykey: storage block base: 0xffffffc005080000 [ 2.957716@0] unifykey: probe done! [ 2.961609@0] unifykey: no efuse-version set, use default value: -1 [ 2.967389@0] unifykey: key unify config unifykey-num is 6 [ 2.972874@0] unifykey: key unify fact unifykey-num is 6 [ 2.978077@0] unifykey: unifykey_devno: ee00000 [ 2.982925@0] unifykey: device unifykeys created ok [ 2.987469@0] unifykey: aml_unifykeys_init done! [ 2.992255@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.998645@0] amlkaraoke init success! [ 3.001745@0] sysled: module init [ 3.005125@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.010086@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.017241@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.023748@0] amlogic rfkill init [ 3.028367@0] dmc_monitor_probe [ 3.030136@0] page_trace_module_init, create sysfs failed [ 3.035815@0] defendkey defendkey: Reserved memory is not enough! [ 3.041309@0] defendkey: probe of defendkey failed with error -22 [ 3.048334@0] usbcore: registered new interface driver snd-usb-audio [ 3.057554@0] asoc debug: aml_audio_controller_probe-130 [ 3.059420@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.064724@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.072510@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.079679@0] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.086057@0] aml_tdm_platform_probe(), share en = 1[ 3.090796@0] No channel mask node Channel_Mask [ 3.095574@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.101146@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.109067@0] aml_tdm_platform_probe(), share en = 1[ 3.113568@0] No channel mask node Channel_Mask [ 3.118329@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.123885@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.131819@0] aml_tdm_platform_probe(), share en = 1[ 3.136337@0] No channel mask node Channel_Mask [ 3.141953@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.148992@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.157073@0] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.166968@0] Register vad [ 3.168169@0] check whether to update sound card init data [ 3.173934@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.180950@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.188259@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.193876@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.201542@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.208873@0] aml_dai_tdm_probe, failed add snd tdm controls [ 3.214741@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.221233@0] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.228288@0] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.234282@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.241183@0] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.246989@0] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.253712@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.261292@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.268519@2] snd_card_add_kcontrols card:ffffffc01ca01818 [ 3.273598@2] effect_v2 is not init [ 3.277058@2] Failed to add VAD controls [ 3.281270@2] GACT probability NOT on [ 3.284545@2] Mirror/redirect action on [ 3.288317@2] u32 classifier [ 3.291144@2] Actions configured [ 3.294702@2] Netfilter messages via NETLINK v0.30. [ 3.299787@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.305974@2] ctnetlink v0.93: registering with nfnetlink. [ 3.311712@1] xt_time: kernel timezone is -0000 [ 3.315677@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.321870@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.326865@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.332455@1] Initializing XFRM netlink socket [ 3.337424@1] NET: Registered protocol family 10 [ 3.342603@1] mip6: Mobile IPv6 [ 3.344516@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.350313@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.357326@1] NET: Registered protocol family 17 [ 3.360642@1] NET: Registered protocol family 15 [ 3.365210@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.378303@1] Bluetooth: RFCOMM TTY layer initialized [ 3.383200@1] Bluetooth: RFCOMM socket layer initialized [ 3.388481@1] Bluetooth: RFCOMM ver 1.11 [ 3.392334@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.397762@1] Bluetooth: BNEP filters: protocol multicast [ 3.403114@1] Bluetooth: BNEP socket layer initialized [ 3.408200@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.414240@1] Bluetooth: HIDP socket layer initialized [ 3.419401@1] l2tp_core: L2TP core driver, V2.0 [ 3.423822@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.428723@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.434447@1] l2tp_netlink: L2TP netlink interface [ 3.439205@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.445228@1] l2tp_debugfs: L2TP debugfs support [ 3.449767@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.456369@1] NET: Registered protocol family 35 [ 3.461146@1] Key type dns_resolver registered [ 3.466297@1] Registered swp emulation handler [ 3.469787@1] Registered cp15_barrier emulation handler [ 3.474935@1] Registered setend emulation handler [ 3.479601@1] disable EAS feature [ 3.483732@0] registered taskstats version 1 [ 3.496448@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.002654@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.002728@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.010845@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.019327@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.026196@3] hub 1-0:1.0: USB hub found [ 4.029284@3] hub 1-0:1.0: 1 port detected [ 4.033561@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.038834@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.046653@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.055560@0] hub 2-0:1.0: USB hub found [ 4.058762@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.066037@0] usb usb2: Unsupported the hub [ 4.070452@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.078554@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.187234@2] dwc_otg: Core Release: 3.10a [ 4.187281@2] dwc_otg: Setting default values for core params [ 4.191460@2] dwc_otg: curmode: 0, host_only: 0 [ 4.208225@2] dwc_otg: Using Buffer DMA mode [ 4.208248@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.212130@2] dwc_otg: Working on port type = SLAVE [ 4.216963@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.224093@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.233101@0] gxbb_pm: enter meson_pm_probe! [ 4.233138@0] no vddio3v3_en pin[ 4.234780@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.239858@0] gxbb_pm: meson_pm_probe done [ 4.24419Z 4.250473@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.255927@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.465835@0] ubi0: attaching mtd6 [ 4.994203@0] ubi0: scanning is finished [ 4.998340@3] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.998626@3] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.005676@3] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.012523@3] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.019609@3] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.025797@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.033132@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.042357@3] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.051774@0] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.057569@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.102250@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.104223@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.114189@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.124967@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.130920@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.317215@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.375262@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.463515@3] ubi1: attaching mtd7 [ 5.790118@3] ubi1: scanning is finished [ 5.793991@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.794117@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.801126@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.808014@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.815079@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.821206@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.828534@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.837766@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.847088@0] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 LE[ 5.856374@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 Bs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.880140@2] UBIFS (ubi1:0): recovery needed [ 5.949084@0] UBIFS (ubi1:0): recovery completed [ 5.949241@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.955417@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.965416@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.976108@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.982837@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2c13450 --- 0 OK [ 7.018279@1] aml_tdm_open skip network Init because /sys/class/net/eth0 is not exist [ 7.029160@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.029201@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.036467@1] aml_tdm_open [ 7.037387@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting [ 7.045885@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.051072@2] cpufreq_interactive: no need to active hmp boost! for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.134724@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.138384@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.144628@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.193246@1] asoc-aml-card auge_sound: tdm playback enable [ 8.648970@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK reboot Failed to open gpio value for reading! bypass gpio changed = -1 The system is going down NOW! Sent SIGTERM to all processes [ 14.320098@3] asoc-aml-card auge_sound: tdm playback stop [ 14.320395@3] asoc-aml-card auge_sound: tdm capture stop [ 14.325222@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.319252@2] mtd_nand_reboot_notifier 35 [ 16.319512@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.327586@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.330936@2] usb usb2: USB disconnect, device number 1 [ 16.341175@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.341877@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.347260@3] usb usb1: USB disconnect, device number 1 [ 16.354910@0] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.375704@0] reboot: Restarting system [ 16.375947@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22028 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1a 00 34 26 0c 40 19 02 31 27 0e 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015883 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975203 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016840@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100192@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129129@0] ftrace: allocating 43519 entries in 170 pages [ 0.209525@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210334@0] CPU0: update cpu_capacity 1024 [ 0.214660@0] ASID allocator initialised with 32768 entries [ 0.252638@0] secmon: can't fine clear_range [ 0.253217@0] EFI services will not be available. [ 0.256067@0] Meson chip version = RevC (25:C - 43:0) [ 0.289996@1] Detected VIPT I-cache on CPU1 [ 0.290059@1] CPU1: update cpu_capacity 1024 [ 0.290062@1] CPU1: Booted secondary processor [410fd034] [ 0.318043@2] Detected VIPT I-cache on CPU2 [ 0.318096@2] CPU2: update cpu_capacity 1024 [ 0.318098@2] CPU2: Booted secondary processor [410fd034] [ 0.346117@3] Detected VIPT I-cache on CPU3 [ 0.346167@3] CPU3: update cpu_capacity 1024 [ 0.346170@3] CPU3: Booted secondary processor [410fd034] [ 0.346259@0] Brought up 4 CPUs [ 0.385482@0] SMP: Total of 4 processors activated. [ 0.390391@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396427@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407391@0] CPU: All CPU(s) started at EL2 [ 0.408167@0] alternatives: patching kernel code [ 0.413566@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420707@0] devtmpfs: initialized [ 0.436162@0] DMI not present or invalid. [ 0.436560@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444544@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451109@0] pinctrl core: initialized pinctrl subsystem [ 0.457714@0] NET: Registered protocol family 16 [ 0.481044@0] cpuidle: using governor menu [ 0.481191@0] register canvas platform driver [ 0.483913@0] register rdma platform driver [ 0.489361@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.495734@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.503205@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.509337@0] clkmsr: clkmsr: driver init [ 0.513035@0] codec_mm_module_init [ 0.516477@0] media_configs_system_init [ 0.520617@0] aml_watch_point_probe, in, wp:2 [ 0.526147@0] pstore: using zlib compression [ 0.529538@0] console [pstore-1] enabled [ 0.532868@0] pstore: Registered ramoops as persistent store backend [ 0.539270@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.553321@0] aml_iomap: amlogic iomap probe done [ 0.557936@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.559917@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.568900@0] audio_clocks: audio_clocks_probe done [ 0.577445@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.577499@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.582667@0] amlogic auge_snd_iomap probe done [ 0.858392@0] vgaarb: loaded [ 0.858784@0] SCSI subsystem initialized [ 0.859900@0] usbcore: registered new interface driver usbfs [ 0.865379@0] usbcore: registered new interface driver hub [ 0.870906@0] usbcore: registered new device driver usb [ 0.876206@0] Linux video capture interface: v2.00 [ 0.880933@0] pps_core: LinuxPPS API ver. 1 registered [ 0.886033@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.895393@0] PTP clock support registered [ 0.899883@0] dmi: Firmware registration failed. [ 0.904539@0] secmon: reserve_mem_size:0x300000 [ 0.908739@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.915636@0] secmon: get page:ffffffbf00140000, 5000 [ 0.920383@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.928781@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.935513@0] fb: osd_init_module [ 0.939966@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.945593@0] Bluetooth: Core ver 2.22 [ 0.948692@0] NET: Registered protocol family 31 [ 0.953300@0] Bluetooth: HCI device and connection manager initialized [ 0.959854@0] Bluetooth: HCI socket layer initialized [ 0.964915@0] Bluetooth: L2CAP socket layer initialized [ 0.970237@0] Bluetooth: SCO socket layer initialized [ 0.979296@0] NetLabel: Initializing [ 0.979328@0] NetLabel: domain hash size = 128 [ 0.983378@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.988618@0] NetLabel: unlabeled traffic allowed by default [ 0.996021@3] clocksource: Switched to clocksource arch_sys_counter [ 1.096652@3] VFS: Disk quotas dquot_6.6.0 [ 1.096759@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115672@1] NET: Registered protocol family 2 [ 1.116438@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.121895@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.128597@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.135219@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.141103@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.147806@3] NET: Registered protocol family 1 [ 1.152613@3] RPC: Registered named UNIX socket transport module. [ 1.158262@3] RPC: Registered udp transport module. [ 1.163139@3] RPC: Registered tcp transport module. [ 1.168028@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.176192@3] Unpacking initramfs... [ 1.277657@3] Freeing initrd memory: 2308K [ 1.279037@3] hw perfevents: clusterb_enabled = 0 [ 1.280899@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.285337@3] hw perfevents: cluster A irq = 7 [ 1.289902@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.299265@3] audit: initializing netlink subsys (disabled) [ 1.303408@3] audit: type=2000 audit(1.072:1): initialized [ 1.310046@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.331040@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.337073@3] NFS: Registering the id_resolver key type [ 1.337134@3] Key type id_resolver registered [ 1.341081@3] Key type id_legacy registered [ 1.345596@3] fuse init (API version 7.26) [ 1.354162@3] NET: Registered protocol family 38 [ 1.354208@3] Key type asymmetric registered [ 1.358307@3] Asymmetric key parser 'x509' registered [ 1.363649@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.371002@3] io scheduler noop registered (default) [ 1.376007@3] io scheduler deadline registered [ 1.380660@3] io scheduler cfq registered [ 1.395405@2] random: fast init done [ 1.395471@2] random: crng init done [ 1.395955@3] Unable to detect cache hierarchy for CPU 0 [ 1.423909@3] loop: module loaded [ 1.428915@3] zram: Added device: zram0 [ 1.429325@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.434572@3] libphy: Fixed MDIO Bus: probed [ 1.438637@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.443324@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.450891@3] PPP generic driver version 2.4.2 [ 1.454445@3] PPP BSD Compression module registered [ 1.459065@3] PPP Deflate Compression module registered [ 1.464319@3] PPP MPPE Compression module registered [ 1.469286@3] NET: Registered protocol family 24 [ 1.474064@3] usbcore: registered new interface driver asix [ 1.479658@3] usbcore: registered new interface driver ax88179_178a [ 1.485922@3] usbcore: registered new interface driver cdc_ether [ 1.491939@3] usbcore: registered new interface driver net1080 [ 1.497813@3] usbcore: registered new interface driver cdc_subset [ 1.503925@3] usbcore: registered new interface driver zaurus [ 1.509723@3] usbcore: registered new interface driver cdc_ncm [ 1.516203@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.522239@3] ehci-pci: EHCI PCI platform driver [ 1.526976@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.533292@3] ohci-pci: OHCI PCI platform driver [ 1.538484@3] usbcore: registered new interface driver cdc_acm [ 1.543770@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.552092@3] usbcore: registered new interface driver usb-storage [ 1.558349@3] usbcore: registered new interface driver usbserial [ 1.564843@3] mousedev: PS/2 mouse device common for all mice [ 1.570400@3] usbcore: registered new interface driver xpad [ 1.575846@3] i2c /dev entries driver [ 1.579468@3] usbcore: registered new interface driver uvcvideo [ 1.585238@3] USB Video Class driver (1.1.1) [ 1.589520@3] md: linear personality registered for level -1 [ 1.595701@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.605329@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.611186@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.618975@2] usbcore: registered new interface driver usbhid [ 1.622870@2] usbhid: USB HID core driver [ 1.627142@0] ashmem: initialized [ 1.630602@2] logger: created 512K log 'log_main' [ 1.635146@0] logger: created 1K log 'log_events' [ 1.639863@2] logger: created 1K log 'log_radio' [ 1.644545@0] logger: created 16K log 'log_system' [ 1.649111@0] exFAT: Version 1.3.0 [ 1.654016@3] ff803000.serial: clock gate not found [ 1.657505@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.664652@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.679625@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.682216@3] console [ttyS0] enabled [ 1.682216@3] console [ttyS0] enabled [ 1.689419@3] bootconsole [aml_uart0] disabled [ 1.689419@3] bootconsole [aml_uart0] disabled [ 1.698929@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.705388@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.715648@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.725471@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.731991@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.744468@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.748465@0] irq = 20 [ 1.750792@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.759582@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.764106@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.769234@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.775711@0] meson-remote: Driver init [ 1.779671@0] meson-remote: remote_probe [ 1.783286@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.788357@0] meson-remote ff808040.rc: don't find the node [ 1.794910@0] meson-remote ff808040.rc: led_blink = 0 [ 1.799903@0] meson-remote ff808040.rc: don't find the node [ 1.806802@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.812449@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.818147@0] meson-remote ff808040.rc: custom_number = 3 [ 1.823464@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.829143@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.836305@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.842598@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.848748@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.854415@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.861572@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.867868@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.874013@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.879685@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.886843@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.893139@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.899268@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.905991@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.911769@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.917547@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.923240@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.928932@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.934883@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.940749@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.946354@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.951702@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.957054@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.963101@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.970052@3] meson-remote: IR XMP protocol handler initialized [ 1.975706@3] efusekeynum: 4 [ 1.978228@3] efusekeyname: mac offset: 0 size: 6 [ 1.984584@3] efusekeyname: mac_bt offset: 6 size: 6 [ 1.990957@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.997342@3] efusekeyname: usid offset: 18 size: 16 [ 2.004055@2] efuse efuse: probe OK! [ 2.009529@2] ge2d: ge2d_init_module [ 2.011296@2] [tsync_pcr_init]init success. [ 2.015874@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.022321@1] DI: di_module_init ok. [ 2.025449@1] dim:dim_module_init [ 2.028802@1] dim:dim_module_init finish [ 2.032372@1] dil:dil_init. [ 2.035310@1] dil:dil_init ok. [ 2.038203@1] vdin_drv_init: major 241 [ 2.042137@1] vdin_drv_init: vdin driver init done [ 2.046604@1] [viuin..]viuin_init_module viuin module init [ 2.052417@1] [viuin..]viuin_probe probe ok. [ 2.056518@1] amlvid:info: amlvideo_init called[ 2.060567@1] amlvid:info: amlvideo_create_instance called [ 2.065986@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.071350@0] amlvideo-000: V4L2 device registered as video10 [ 2.076795@0] amlvid:info: amlvideo_create_instance called [ 2.082206@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.087633@3] amlvideo-001: V4L2 device registered as video23 [ 2.093298@3] PPMGRDRV: warn: ppmgr module init func called [ 2.099866@3] videosync_create_instance dev_s ffffffc01c8af400,dev_s->dev ffffffc01cf9ac00 [ 2.106719@3] videosync_create_instance reg videosync.0 [ 2.112142@3] aml_vecm_init:module init [ 2.112143@0] videosync_thread started [ 2.119729@3] amdolby_vision_init:module init [ 2.124019@3] prime_sl module init [ 2.127599@3] amlogic mtd driver init [ 2.131328@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.136546@3] bl mode descrete [ 2.139461@3] fip_copies 4 [ 2.142150@3] fip_size 0x200000 [ 2.145247@3] nand_clk_ctrl 0xffe07000 [ 2.148959@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.154594@3] nand_clk_ctrl 0xffe07000 [ 2.158289@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.166604@3] plat->aml_nand_device ffffff800a778cf8 [ 2.171134@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.177110@3] NAND device id: c2 dc 90 a2 57 3 [ 2.181311@3] NAND device: Manufacturer ID: [ 2.185357@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.192024@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.197514@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.203035@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.209337@3] mtd->oobavail: 0x10 [ 2.212931@3] aml_nand_init 2119: plat-name:bootloader [ 2.217704@3] Creating 1 MTD partitions on "bootloader": [ 2.222963@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.230664@0] bootloader initialized ok [ 2.232218@0] plat->aml_nand_device ffffff800a778cf8 [ 2.237108@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.243150@0] NAND device id: c2 dc 90 a2 57 3 [ 2.247288@0] NAND device: Manufacturer ID: [ 2.251355@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.258002@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.263495@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.269023@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.275322@0] mtd->oobavail: 0x10 [ 2.279046@0] aml_nand_init 2119: plat-name:nandnormal [ 2.283706@0] bbt_start=20 [ 2.286352@0] env_start=24 [ 2.289025@0] key_start=32 [ 2.291690@0] dtb_start=40 [ 2.294372@0] ddr_start=44 [ 2.297048@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.303526@0] get_free_node 43: bitmap=0 [ 2.306967@0] get_free_node 55: bitmap=1 [ 2.311050@0] get_free_node 43: bitmap=1 [ 2.314728@0] get_free_node 55: bitmap=3 [ 2.318813@0] get_free_node 43: bitmap=3 [ 2.322490@0] get_free_node 55: bitmap=7 [ 2.326372@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.333012@0] nbbt free list: [ 2.335937@0] blockN=21, ec=-1, dirty_flag=0 [ 2.340171@0] blockN=22, ec=-1, dirty_flag=0 [ 2.344397@0] blockN=23, ec=-1, dirty_flag=0 [ 2.348624@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.354032@0] nbbt valid addr: 500000 [ 2.357250@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.362855@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.369097@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.375507@0] get_free_node 43: bitmap=7 [ 2.378984@0] get_free_node 55: bitmap=f [ 2.383068@0] get_free_node 43: bitmap=f [ 2.386747@0] get_free_node 55: bitmap=1f [ 2.390917@0] get_free_node 43: bitmap=1f [ 2.394682@0] get_free_node 55: bitmap=3f [ 2.398852@0] get_free_node 43: bitmap=3f [ 2.402617@0] get_free_node 55: bitmap=7f [ 2.406786@0] get_free_node 43: bitmap=7f [ 2.410552@0] get_free_node 55: bitmap=ff [ 2.414722@0] get_free_node 43: bitmap=ff [ 2.418494@0] get_free_node 55: bitmap=1ff [ 2.422744@0] get_free_node 43: bitmap=1ff [ 2.426593@0] get_free_node 55: bitmap=3ff [ 2.430648@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.437288@0] nenv free list: [ 2.440221@0] blockN=25, ec=-1, dirty_flag=0 [ 2.444447@0] blockN=26, ec=-1, dirty_flag=0 [ 2.448673@0] blockN=27, ec=-1, dirty_flag=0 [ 2.452899@0] blockN=28, ec=-1, dirty_flag=0 [ 2.457126@0] blockN=29, ec=-1, dirty_flag=0 [ 2.461352@0] blockN=30, ec=-1, dirty_flag=0 [ 2.465578@0] blockN=31, ec=-1, dirty_flag=0 [ 2.469805@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.481541@0] nenv valid addr: 610000 [ 2.481561@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.485991@0] get_free_node 43: bitmap=3ff [ 2.489840@0] get_free_node 55: bitmap=7ff [ 2.494098@0] get_free_node 43: bitmap=7ff [ 2.497949@0] get_free_node 55: bitmap=fff [ 2.502205@0] get_free_node 43: bitmap=fff [ 2.506056@0] get_free_node 55: bitmap=1fff [ 2.510399@0] get_free_node 43: bitmap=1fff [ 2.514336@0] get_free_node 55: bitmap=3fff [ 2.518679@0] get_free_node 43: bitmap=3fff [ 2.522616@0] get_free_node 55: bitmap=7fff [ 2.526959@0] get_free_node 43: bitmap=7fff [ 2.530896@0] get_free_node 55: bitmap=ffff [ 2.535239@0] get_free_node 43: bitmap=ffff [ 2.539176@0] get_free_node 55: bitmap=1ffff [ 2.543605@0] get_free_node 43: bitmap=1ffff [ 2.547629@0] get_free_node 55: bitmap=3ffff [ 2.551855@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.558495@0] nkey free list: [ 2.561428@0] blockN=32, ec=-1, dirty_flag=0 [ 2.565654@0] blockN=33, ec=-1, dirty_flag=0 [ 2.569880@0] blockN=34, ec=-1, dirty_flag=0 [ 2.574106@0] blockN=35, ec=-1, dirty_flag=0 [ 2.578333@0] blockN=36, ec=-1, dirty_flag=0 [ 2.582559@0] blockN=37, ec=-1, dirty_flag=0 [ 2.586785@0] blockN=38, ec=-1, dirty_flag=0 [ 2.591011@0] blockN=39, ec=-1, dirty_flag=0 [ 2.595238@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.600327@0] nkey valid addr: fffffffffffc0000 [ 2.604811@0] aml_nand_key_check 1251 NO key exist [ 2.609556@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.616180@0] get_free_node 43: bitmap=3ffff [ 2.619984@0] get_free_node 55: bitmap=7ffff [ 2.624422@0] get_free_node 43: bitmap=7ffff [ 2.628500@0] get_free_node 55: bitmap=fffff [ 2.632881@0] get_free_node 43: bitmap=fffff [ 2.636898@0] get_free_node 55: bitmap=1fffff [ 2.641210@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.647850@0] ndtb free list: [ 2.650783@0] blockN=41, ec=-1, dirty_flag=0 [ 2.655009@0] blockN=42, ec=-1, dirty_flag=0 [ 2.659235@0] blockN=43, ec=-1, dirty_flag=0 [ 2.663462@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.681468@0] ndtb valid addr: a00000 [ 2.681488@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.685918@0] get_free_node 43: bitmap=1fffff [ 2.690028@0] get_free_node 55: bitmap=3fffff [ 2.694542@0] get_free_node 43: bitmap=3fffff [ 2.698653@0] get_free_node 55: bitmap=7fffff [ 2.702965@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.709605@0] nddr free list: [ 2.712538@0] blockN=44, ec=-1, dirty_flag=0 [ 2.716764@0] blockN=45, ec=-1, dirty_flag=0 [ 2.720991@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.726079@0] nddr valid addr: fffffffffffc0000 [ 2.730564@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.735311@0] tpl: off 16777216, size 8388608 [ 2.801572@0] Creating 7 MTD partitions on "nandnormal": [ 2.801603@0] 0x000001000000-0x000001800000 : "tpl" [ 2.808994@1] 0x000001800000-0x000001a00000 : "misc" [ 2.812966@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.817470@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.824402@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.829200@3] 0x000003b00000-0x000015300000 : "system" [ 2.868080@3] 0x000015300000-0x000020000000 : "data" [ 2.891271@3] nandnormal initialized ok [ 2.891352@3] aml_ubootenv_init: register env chardev [ 2.894719@3] aml_ubootenv_init: register env chardev OK [ 2.899942@3] amlnf_dtb_init: register dtb cdev [ 2.904458@3] amlnf_dtb_init: register dtd cdev OK [ 2.909008@3] mtd_nand_probe 267 , err = 0 [ 2.913725@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.919345@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.926153@3] unifykey: storage in base: 0xffffffc005000000 [ 2.931086@3] unifykey: storage out base: 0xffffffc005040000 [ 2.936674@3] unifykey: storage block base: 0xffffffc005080000 [ 2.942447@3] unifykey: probe done! [ 2.946351@3] unifykey: no efuse-version set, use default value: -1 [ 2.952125@3] unifykey: key unify config unifykey-num is 6 [ 2.957589@3] unifykey: key unify fact unifykey-num is 6 [ 2.962805@3] unifykey: unifykey_devno: ee00000 [ 2.967558@3] unifykey: device unifykeys created ok [ 2.972203@3] unifykey: aml_unifykeys_init done! [ 2.976992@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.983323@2] amlkaraoke init success! [ 2.986476@2] sysled: module init [ 2.989882@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.994832@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.001935@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.008484@3] amlogic rfkill init [ 3.013211@3] dmc_monitor_probe [ 3.014858@3] page_trace_module_init, create sysfs failed [ 3.028550@3] defendkey defendkey: Reserved memory is not enough! [ 3.029018@3] defendkey: probe of defendkey failed with error -22 [ 3.036334@2] usbcore: registered new interface driver snd-usb-audio [ 3.045282@2] asoc debug: aml_audio_controller_probe-130 [ 3.047071@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.052466@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.060235@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.067401@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.073779@2] aml_tdm_platform_probe(), share en = 1[ 3.078522@2] No channel mask node Channel_Mask [ 3.083287@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.088826@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.096791@2] aml_tdm_platform_probe(), share en = 1[ 3.101288@2] No channel mask node Channel_Mask [ 3.106035@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.111606@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.119540@2] aml_tdm_platform_probe(), share en = 1[ 3.124058@2] No channel mask node Channel_Mask [ 3.129680@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.136716@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.144808@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.154669@1] Register vad [ 3.155862@1] check whether to update sound card init data [ 3.161685@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.168675@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.175982@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.181597@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.189292@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.196596@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.202463@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.208956@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.216106@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.221995@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.228913@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.234711@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.241438@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.249225@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.256308@3] snd_card_add_kcontrols card:ffffffc01ca10818 [ 3.261322@3] effect_v2 is not init [ 3.264734@3] Failed to add VAD controls [ 3.268994@3] GACT probability NOT on [ 3.272263@3] Mirror/redirect action on [ 3.276034@3] u32 classifier [ 3.278864@3] Actions configured [ 3.282417@3] Netfilter messages via NETLINK v0.30. [ 3.287503@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.293687@3] ctnetlink v0.93: registering with nfnetlink. [ 3.299396@0] xt_time: kernel timezone is -0000 [ 3.303405@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.309588@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.314619@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.320175@0] Initializing XFRM netlink socket [ 3.325168@0] NET: Registered protocol family 10 [ 3.330338@0] mip6: Mobile IPv6 [ 3.332241@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.338005@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.345070@0] NET: Registered protocol family 17 [ 3.348369@0] NET: Registered protocol family 15 [ 3.352924@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.366045@0] Bluetooth: RFCOMM TTY layer initialized [ 3.370932@0] Bluetooth: RFCOMM socket layer initialized [ 3.376200@0] Bluetooth: RFCOMM ver 1.11 [ 3.380060@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.385479@0] Bluetooth: BNEP filters: protocol multicast [ 3.390838@0] Bluetooth: BNEP socket layer initialized [ 3.395917@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.401963@0] Bluetooth: HIDP socket layer initialized [ 3.407139@0] l2tp_core: L2TP core driver, V2.0 [ 3.411545@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.416443@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.422171@0] l2tp_netlink: L2TP netlink interface [ 3.426928@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.432954@0] l2tp_debugfs: L2TP debugfs support [ 3.437488@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.444093@0] NET: Registered protocol family 35 [ 3.448856@0] Key type dns_resolver registered [ 3.454019@0] Registered swp emulation handler [ 3.457508@0] Registered cp15_barrier emulation handler [ 3.462597@0] Registered setend emulation handler [ 3.467311@0] disable EAS feature [ 3.471415@1] registered taskstats version 1 [ 3.484231@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.990468@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.990527@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.998646@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.007135@0] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.014052@3] hub 1-0:1.0: USB hub found [ 4.017055@3] hub 1-0:1.0: 1 port detected [ 4.021393@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.026652@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.034470@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.043417@0] hub 2-0:1.0: USB hub found [ 4.046543@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.053824@0] usb usb2: Unsupported the hub [ 4.058281@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.066373@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.174939@2] dwc_otg: Core Release: 3.10a [ 4.174979@2] dwc_otg: Setting default values for core params [ 4.179141@2] dwc_otg: curmode: 0, host_only: 0 [ 4.195929@2] dwc_otg: Using Buffer DMA mode [ 4.195952@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.199834@2] dwc_otg: Working on port type = SLAVE [ 4.204667@2] dwc_otg: Dedicated Tx FIFOs mode [ 4.211692@2] cpucore_cooling_register, max_cpu_core_num:4 [ 4.221106@0] gxbb_pm: enter meson_pm_probe! [ 4.221145@0] no vddio3v3_en pin[ 4.222786@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.227880@0] gxbb_pm: meson_pm_probe done [ 4.23221Z 4.238495@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.243878@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.453108@1] ubi0: attaching mtd6 [ 4.981322@1] ubi0: scanning is finished [ 4.985675@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.985966@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.992974@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.999909@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.006932@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.013141@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.020470@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.029718@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.039113@0] ubi0: background thread "ubi_bgt0d" started, PID 2002 [ 5.044942@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2005 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.089938@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.091864@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.101980@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.112658@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.118607@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.297733@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.355584@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.442081@3] ubi1: attaching mtd7 [ 5.768608@3] ubi1: scanning is finished [ 5.772610@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.772721@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.779729@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.786617@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.793683@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.799810@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.807138@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.816370@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.825692@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.834995@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.858695@1] UBIFS (ubi1:0): recovery needed [ 5.929020@0] UBIFS (ubi1:0): recovery completed [ 5.929183@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.935360@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.945357@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.956049@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.962778@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2bd0450 --- 0 [ 6.988315@1] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 6.997186@1] asoc-aml-card auge_sound: tdm prepare capture [ 6.997228@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.004336@1] aml_tdm_open [ 7.005408@1] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.025526@3] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.025583@3] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.102808@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.106502@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.112771@1] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.161646@1] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.688706@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22020 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015888 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975178 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016836@0] Console: colour dummy device 80x25 [ 0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045859@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062391@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129133@0] ftrace: allocating 43519 entries in 170 pages [ 0.209396@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210211@0] CPU0: update cpu_capacity 1024 [ 0.214538@0] ASID allocator initialised with 32768 entries [ 0.252512@0] secmon: can't fine clear_range [ 0.253103@0] EFI services will not be available. [ 0.255946@0] Meson chip version = RevC (25:C - 43:0) [ 0.289866@1] Detected VIPT I-cache on CPU1 [ 0.289928@1] CPU1: update cpu_capacity 1024 [ 0.289930@1] CPU1: Booted secondary processor [410fd034] [ 0.317925@2] Detected VIPT I-cache on CPU2 [ 0.317979@2] CPU2: update cpu_capacity 1024 [ 0.317982@2] CPU2: Booted secondary processor [410fd034] [ 0.345989@3] Detected VIPT I-cache on CPU3 [ 0.346038@3] CPU3: update cpu_capacity 1024 [ 0.346040@3] CPU3: Booted secondary processor [410fd034] [ 0.346130@0] Brought up 4 CPUs [ 0.385350@0] SMP: Total of 4 processors activated. [ 0.390259@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396295@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407256@0] CPU: All CPU(s) started at EL2 [ 0.408035@0] alternatives: patching kernel code [ 0.413447@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420573@0] devtmpfs: initialized [ 0.436025@0] DMI not present or invalid. [ 0.436415@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444406@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.450970@0] pinctrl core: initialized pinctrl subsystem [ 0.457507@0] NET: Registered protocol family 16 [ 0.476896@0] cpuidle: using governor menu [ 0.477032@0] register canvas platform driver [ 0.479762@0] register rdma platform driver [ 0.485222@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491585@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499059@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505180@0] clkmsr: clkmsr: driver init [ 0.508903@0] codec_mm_module_init [ 0.512335@0] media_configs_system_init [ 0.516471@0] aml_watch_point_probe, in, wp:2 [ 0.521126@0] pstore: using zlib compression [ 0.525391@0] console [pstore-1] enabled [ 0.528719@0] pstore: Registered ramoops as persistent store backend [ 0.535133@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549173@0] aml_iomap: amlogic iomap probe done [ 0.553823@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555769@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564723@0] audio_clocks: audio_clocks_probe done [ 0.573282@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573338@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578510@0] amlogic auge_snd_iomap probe done [ 0.865583@0] vgaarb: loaded [ 0.865983@0] SCSI subsystem initialized [ 0.867102@0] usbcore: registered new interface driver usbfs [ 0.872562@0] usbcore: registered new interface driver hub [ 0.878097@0] usbcore: registered new device driver usb [ 0.883378@0] Linux video capture interface: v2.00 [ 0.888127@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893217@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902585@0] PTP clock support registered [ 0.907076@0] dmi: Firmware registration failed. [ 0.915641@0] secmon: reserve_mem_size:0x300000 [ 0.915898@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.922855@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927577@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.935971@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942700@0] fb: osd_init_module [ 0.947167@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.952791@0] Bluetooth: Core ver 2.22 [ 0.955889@0] NET: Registered protocol family 31 [ 0.960490@0] Bluetooth: HCI device and connection manager initialized [ 0.967041@0] Bluetooth: HCI socket layer initialized [ 0.972107@0] Bluetooth: L2CAP socket layer initialized [ 0.977428@0] Bluetooth: SCO socket layer initialized [ 0.986510@0] NetLabel: Initializing [ 0.986543@0] NetLabel: domain hash size = 128 [ 0.990573@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.995806@0] NetLabel: unlabeled traffic allowed by default [ 1.003305@3] clocksource: Switched to clocksource arch_sys_counter [ 1.103840@3] VFS: Disk quotas dquot_6.6.0 [ 1.103950@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.122585@3] NET: Registered protocol family 2 [ 1.123348@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.128821@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.135478@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142056@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148022@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.154675@3] NET: Registered protocol family 1 [ 1.159537@3] RPC: Registered named UNIX socket transport module. [ 1.165150@3] RPC: Registered udp transport module. [ 1.170041@3] RPC: Registered tcp transport module. [ 1.174940@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.183009@3] Unpacking initramfs... [ 1.284390@3] Freeing initrd memory: 2308K [ 1.285817@3] hw perfevents: clusterb_enabled = 0 [ 1.287730@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.292102@3] hw perfevents: cluster A irq = 7 [ 1.296614@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.305966@3] audit: initializing netlink subsys (disabled) [ 1.310147@3] audit: type=2000 audit(1.080:1): initialized [ 1.316762@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.333782@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.335724@1] NFS: Registering the id_resolver key type [ 1.339492@1] Key type id_resolver registered [ 1.343804@1] Key type id_legacy registered [ 1.348357@1] fuse init (API version 7.26) [ 1.356779@1] NET: Registered protocol family 38 [ 1.356823@1] Key type asymmetric registered [ 1.361055@1] Asymmetric key parser 'x509' registered [ 1.366395@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.373757@1] io scheduler noop registered (default) [ 1.378743@1] io scheduler deadline registered [ 1.383411@1] io scheduler cfq registered [ 1.397812@2] random: fast init done [ 1.397880@2] random: crng init done [ 1.398408@1] Unable to detect cache hierarchy for CPU 0 [ 1.436519@1] loop: module loaded [ 1.441528@1] zram: Added device: zram0 [ 1.441978@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.447400@1] libphy: Fixed MDIO Bus: probed [ 1.451224@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.455931@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.463584@1] PPP generic driver version 2.4.2 [ 1.467025@1] PPP BSD Compression module registered [ 1.471684@1] PPP Deflate Compression module registered [ 1.476939@1] PPP MPPE Compression module registered [ 1.481905@1] NET: Registered protocol family 24 [ 1.486697@1] usbcore: registered new interface driver asix [ 1.492270@1] usbcore: registered new interface driver ax88179_178a [ 1.498538@1] usbcore: registered new interface driver cdc_ether [ 1.504559@1] usbcore: registered new interface driver net1080 [ 1.510425@1] usbcore: registered new interface driver cdc_subset [ 1.516584@1] usbcore: registered new interface driver zaurus [ 1.522347@1] usbcore: registered new interface driver cdc_ncm [ 1.528791@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.534870@1] ehci-pci: EHCI PCI platform driver [ 1.539603@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.545913@1] ohci-pci: OHCI PCI platform driver [ 1.551067@1] usbcore: registered new interface driver cdc_acm [ 1.556393@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.564713@1] usbcore: registered new interface driver usb-storage [ 1.570967@1] usbcore: registered new interface driver usbserial [ 1.577447@2] mousedev: PS/2 mouse device common for all mice [ 1.583014@2] usbcore: registered new interface driver xpad [ 1.588481@1] i2c /dev entries driver [ 1.592079@1] usbcore: registered new interface driver uvcvideo [ 1.597854@1] USB Video Class driver (1.1.1) [ 1.602129@1] md: linear personality registered for level -1 [ 1.608351@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.617946@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.623799@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.631648@2] usbcore: registered new interface driver usbhid [ 1.635489@2] usbhid: USB HID core driver [ 1.639732@0] ashmem: initialized [ 1.643176@0] logger: created 512K log 'log_main' [ 1.647743@2] logger: created 1K log 'log_events' [ 1.652519@0] logger: created 1K log 'log_radio' [ 1.657111@2] logger: created 16K log 'log_system' [ 1.661734@2] exFAT: Version 1.3.0 [ 1.666418@3] ff803000.serial: clock gate not found [ 1.670122@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.677260@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.692242@3] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.694821@3] console [ttyS0] enabled [ 1.694821@3] console [ttyS0] enabled [ 1.702038@3] bootconsole [aml_uart0] disabled [ 1.702038@3] bootconsole [aml_uart0] disabled [ 1.711552@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.717974@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.728265@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.738072@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.744590@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.757089@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.761125@0] irq = 20 [ 1.763427@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.772334@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.776671@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.781883@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.788343@0] meson-remote: Driver init [ 1.792309@0] meson-remote: remote_probe [ 1.795905@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.800967@0] meson-remote ff808040.rc: don't find the node [ 1.807520@0] meson-remote ff808040.rc: led_blink = 0 [ 1.812526@0] meson-remote ff808040.rc: don't find the node [ 1.819421@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.825067@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.830762@0] meson-remote ff808040.rc: custom_number = 3 [ 1.836086@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.841761@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.848919@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.855214@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.861361@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.867030@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.874189@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.880489@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.886630@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.892302@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.899460@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.905756@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.911885@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.918607@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.924386@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.930164@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.935857@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.941549@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.947500@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.953365@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.958971@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.964319@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.969666@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.975798@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.982644@2] meson-remote: IR XMP protocol handler initialized [ 1.988333@2] efusekeynum: 4 [ 1.990807@2] efusekeyname: mac offset: 0 size: 6 [ 1.997215@2] efusekeyname: mac_bt offset: 6 size: 6 [ 2.003585@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.009967@2] efusekeyname: usid offset: 18 size: 16 [ 2.016597@3] efuse efuse: probe OK! [ 2.022168@0] ge2d: ge2d_init_module [ 2.023979@0] [tsync_pcr_init]init success. [ 2.028465@3] vout: error: invalid vinfo1. current vmode is not supported [ 2.034934@3] DI: di_module_init ok. [ 2.038050@3] dim:dim_module_init [ 2.041321@3] dim:dim_module_init finish [ 2.044981@3] dil:dil_init. [ 2.047938@3] dil:dil_init ok. [ 2.050778@3] vdin_drv_init: major 241 [ 2.054782@3] vdin_drv_init: vdin driver init done [ 2.059216@3] [viuin..]viuin_init_module viuin module init [ 2.065024@3] [viuin..]viuin_probe probe ok. [ 2.069124@3] amlvid:info: amlvideo_init called[ 2.073192@3] amlvid:info: amlvideo_create_instance called [ 2.078603@3] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.083966@0] amlvideo-000: V4L2 device registered as video10 [ 2.089405@0] amlvid:info: amlvideo_create_instance called [ 2.094834@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.100130@2] amlvideo-001: V4L2 device registered as video23 [ 2.105924@2] PPMGRDRV: warn: ppmgr module init func called [ 2.112072@2] videosync_create_instance dev_s ffffffc01c92ac00,dev_s->dev ffffffc01dfb4200 [ 2.119350@2] videosync_create_instance reg videosync.0 [ 2.124582@2] aml_vecm_init:module init [ 2.124583@0] videosync_thread started [ 2.132318@2] amdolby_vision_init:module init [ 2.136595@2] prime_sl module init [ 2.140250@2] amlogic mtd driver init [ 2.143942@2] prase_get_dtb_nand_parameter:128,parse dts start [ 2.149165@2] bl mode descrete [ 2.152089@2] fip_copies 4 [ 2.154751@2] fip_size 0x200000 [ 2.157865@2] nand_clk_ctrl 0xffe07000 [ 2.161573@2] prase_get_dtb_nand_parameter:234,parse dts end [ 2.167203@2] nand_clk_ctrl 0xffe07000 [ 2.170904@2] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.179219@2] plat->aml_nand_device ffffff800a778cf8 [ 2.183766@2] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.189733@2] NAND device id: c2 dc 90 a2 57 3 [ 2.193927@2] NAND device: Manufacturer ID: [ 2.197973@2] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.204638@2] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.210132@2] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.215654@2] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.221954@2] mtd->oobavail: 0x10 [ 2.225864@3] aml_nand_init 2119: plat-name:bootloader [ 2.230336@3] Creating 1 MTD partitions on "bootloader": [ 2.235581@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.243529@0] bootloader initialized ok [ 2.244805@0] plat->aml_nand_device ffffff800a778cf8 [ 2.249736@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.255774@0] NAND device id: c2 dc 90 a2 57 3 [ 2.259904@0] NAND device: Manufacturer ID: [ 2.263957@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.270611@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.276117@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.281634@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.287939@0] mtd->oobavail: 0x10 [ 2.291412@0] aml_nand_init 2119: plat-name:nandnormal [ 2.296353@0] bbt_start=20 [ 2.298960@0] env_start=24 [ 2.301645@0] key_start=32 [ 2.304316@0] dtb_start=40 [ 2.306980@0] ddr_start=44 [ 2.309678@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.316147@0] get_free_node 43: bitmap=0 [ 2.319584@0] get_free_node 55: bitmap=1 [ 2.323668@0] get_free_node 43: bitmap=1 [ 2.327345@0] get_free_node 55: bitmap=3 [ 2.331422@0] get_free_node 43: bitmap=3 [ 2.335099@0] get_free_node 55: bitmap=7 [ 2.338989@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.345629@0] nbbt free list: [ 2.348562@0] blockN=21, ec=-1, dirty_flag=0 [ 2.352788@0] blockN=22, ec=-1, dirty_flag=0 [ 2.357014@0] blockN=23, ec=-1, dirty_flag=0 [ 2.361240@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.366655@0] nbbt valid addr: 500000 [ 2.369867@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.375472@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.381714@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.388125@0] get_free_node 43: bitmap=7 [ 2.391601@0] get_free_node 55: bitmap=f [ 2.395685@0] get_free_node 43: bitmap=f [ 2.399364@0] get_free_node 55: bitmap=1f [ 2.403535@0] get_free_node 43: bitmap=1f [ 2.407298@0] get_free_node 55: bitmap=3f [ 2.411469@0] get_free_node 43: bitmap=3f [ 2.415225@0] get_free_node 55: bitmap=7f [ 2.419404@0] get_free_node 43: bitmap=7f [ 2.423160@0] get_free_node 55: bitmap=ff [ 2.427339@0] get_free_node 43: bitmap=ff [ 2.431095@0] get_free_node 55: bitmap=1ff [ 2.435361@0] get_free_node 43: bitmap=1ff [ 2.439203@0] get_free_node 55: bitmap=3ff [ 2.443270@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.449905@0] nenv free list: [ 2.452838@0] blockN=25, ec=-1, dirty_flag=0 [ 2.457064@0] blockN=26, ec=-1, dirty_flag=0 [ 2.461290@0] blockN=27, ec=-1, dirty_flag=0 [ 2.465516@0] blockN=28, ec=-1, dirty_flag=0 [ 2.469743@0] blockN=29, ec=-1, dirty_flag=0 [ 2.473969@0] blockN=30, ec=-1, dirty_flag=0 [ 2.478195@0] blockN=31, ec=-1, dirty_flag=0 [ 2.482421@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.494159@0] nenv valid addr: 610000 [ 2.494178@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.498608@0] get_free_node 43: bitmap=3ff [ 2.502458@0] get_free_node 55: bitmap=7ff [ 2.506740@0] get_free_node 43: bitmap=7ff [ 2.510566@0] get_free_node 55: bitmap=fff [ 2.514822@0] get_free_node 43: bitmap=fff [ 2.518673@0] get_free_node 55: bitmap=1fff [ 2.523016@0] get_free_node 43: bitmap=1fff [ 2.526953@0] get_free_node 55: bitmap=3fff [ 2.531304@0] get_free_node 43: bitmap=3fff [ 2.535225@0] get_free_node 55: bitmap=7fff [ 2.539576@0] get_free_node 43: bitmap=7fff [ 2.543513@0] get_free_node 55: bitmap=ffff [ 2.547856@0] get_free_node 43: bitmap=ffff [ 2.551793@0] get_free_node 55: bitmap=1ffff [ 2.556222@0] get_free_node 43: bitmap=1ffff [ 2.560246@0] get_free_node 55: bitmap=3ffff [ 2.564472@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.571111@0] nkey free list: [ 2.574044@0] blockN=32, ec=-1, dirty_flag=0 [ 2.578271@0] blockN=33, ec=-1, dirty_flag=0 [ 2.582497@0] blockN=34, ec=-1, dirty_flag=0 [ 2.586723@0] blockN=35, ec=-1, dirty_flag=0 [ 2.590950@0] blockN=36, ec=-1, dirty_flag=0 [ 2.595176@0] blockN=37, ec=-1, dirty_flag=0 [ 2.599402@0] blockN=38, ec=-1, dirty_flag=0 [ 2.603628@0] blockN=39, ec=-1, dirty_flag=0 [ 2.607855@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.612943@0] nkey valid addr: fffffffffffc0000 [ 2.617428@0] aml_nand_key_check 1251 NO key exist [ 2.622177@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.628846@0] get_free_node 43: bitmap=3ffff [ 2.632615@0] get_free_node 55: bitmap=7ffff [ 2.637039@0] get_free_node 43: bitmap=7ffff [ 2.641062@0] get_free_node 55: bitmap=fffff [ 2.645494@0] get_free_node 43: bitmap=fffff [ 2.649515@0] get_free_node 55: bitmap=1fffff [ 2.653827@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.660467@0] ndtb free list: [ 2.663400@0] blockN=41, ec=-1, dirty_flag=0 [ 2.667626@0] blockN=42, ec=-1, dirty_flag=0 [ 2.671852@0] blockN=43, ec=-1, dirty_flag=0 [ 2.676079@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.694080@0] ndtb valid addr: a00000 [ 2.694103@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.698535@0] get_free_node 43: bitmap=1fffff [ 2.702644@0] get_free_node 55: bitmap=3fffff [ 2.707160@0] get_free_node 43: bitmap=3fffff [ 2.711269@0] get_free_node 55: bitmap=7fffff [ 2.715582@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.722222@0] nddr free list: [ 2.725154@0] blockN=44, ec=-1, dirty_flag=0 [ 2.729381@0] blockN=45, ec=-1, dirty_flag=0 [ 2.733608@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.738696@0] nddr valid addr: fffffffffffc0000 [ 2.743182@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.747928@0] tpl: off 16777216, size 8388608 [ 2.814251@0] Creating 7 MTD partitions on "nandnormal": [ 2.814281@0] 0x000001000000-0x000001800000 : "tpl" [ 2.821675@3] 0x000001800000-0x000001a00000 : "misc" [ 2.825197@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.830024@2] 0x000001c00000-0x000002c00000 : "recovery" [ 2.837048@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.841825@2] 0x000003b00000-0x000015300000 : "system" [ 2.881219@2] 0x000015300000-0x000020000000 : "data" [ 2.905192@2] nandnormal initialized ok [ 2.905276@2] aml_ubootenv_init: register env chardev [ 2.908640@2] aml_ubootenv_init: register env chardev OK [ 2.913862@2] amlnf_dtb_init: register dtb cdev [ 2.918374@2] amlnf_dtb_init: register dtd cdev OK [ 2.922925@2] mtd_nand_probe 267 , err = 0 [ 2.927677@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.933252@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.940061@2] unifykey: storage in base: 0xffffffc005000000 [ 2.945004@2] unifykey: storage out base: 0xffffffc005040000 [ 2.950587@2] unifykey: storage block base: 0xffffffc005080000 [ 2.956365@2] unifykey: probe done! [ 2.960259@2] unifykey: no efuse-version set, use default value: -1 [ 2.966040@2] unifykey: key unify config unifykey-num is 6 [ 2.971509@2] unifykey: key unify fact unifykey-num is 6 [ 2.976723@2] unifykey: unifykey_devno: ee00000 [ 2.981797@2] unifykey: device unifykeys created ok [ 2.986134@2] unifykey: aml_unifykeys_init done! [ 2.990915@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.997252@2] amlkaraoke init success! [ 3.000396@2] sysled: module init [ 3.003783@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.008748@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.015895@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.022395@2] amlogic rfkill init [ 3.027049@2] dmc_monitor_probe [ 3.028821@2] page_trace_module_init, create sysfs failed [ 3.038461@2] defendkey defendkey: Reserved memory is not enough! [ 3.039976@2] defendkey: probe of defendkey failed with error -22 [ 3.046947@2] usbcore: registered new interface driver snd-usb-audio [ 3.056287@2] asoc debug: aml_audio_controller_probe-130 [ 3.058049@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.063384@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.071162@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.078338@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.084715@2] aml_tdm_platform_probe(), share en = 1[ 3.089455@2] No channel mask node Channel_Mask [ 3.094225@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.099763@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.107756@2] aml_tdm_platform_probe(), share en = 1[ 3.112231@2] No channel mask node Channel_Mask [ 3.116955@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.122531@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.130488@2] aml_tdm_platform_probe(), share en = 1[ 3.134994@2] No channel mask node Channel_Mask [ 3.140651@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.147650@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.155729@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.165625@2] Register vad [ 3.166790@2] check whether to update sound card init data [ 3.172633@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.179604@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.186919@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.192526@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.200201@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.207526@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.213403@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.219884@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.226959@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.232941@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.239865@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.245648@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.252384@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.260596@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.267256@2] snd_card_add_kcontrols card:ffffffc01ca18018 [ 3.272251@2] effect_v2 is not init [ 3.275692@2] Failed to add VAD controls [ 3.279915@2] GACT probability NOT on [ 3.283174@2] Mirror/redirect action on [ 3.287003@2] u32 classifier [ 3.289808@2] Actions configured [ 3.293350@2] Netfilter messages via NETLINK v0.30. [ 3.298434@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.304623@2] ctnetlink v0.93: registering with nfnetlink. [ 3.310347@3] xt_time: kernel timezone is -0000 [ 3.314318@3] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.320512@3] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.325540@3] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.331103@3] Initializing XFRM netlink socket [ 3.336088@3] NET: Registered protocol family 10 [ 3.341273@3] mip6: Mobile IPv6 [ 3.343133@3] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.348967@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.356051@3] NET: Registered protocol family 17 [ 3.359266@3] NET: Registered protocol family 15 [ 3.363880@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.376963@3] Bluetooth: RFCOMM TTY layer initialized [ 3.381856@3] Bluetooth: RFCOMM socket layer initialized [ 3.387132@3] Bluetooth: RFCOMM ver 1.11 [ 3.390989@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.396418@3] Bluetooth: BNEP filters: protocol multicast [ 3.401770@3] Bluetooth: BNEP socket layer initialized [ 3.406854@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.412895@3] Bluetooth: HIDP socket layer initialized [ 3.418057@3] l2tp_core: L2TP core driver, V2.0 [ 3.422477@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.427377@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.433103@3] l2tp_netlink: L2TP netlink interface [ 3.437866@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.443890@3] l2tp_debugfs: L2TP debugfs support [ 3.448424@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.455044@3] NET: Registered protocol family 35 [ 3.459790@3] Key type dns_resolver registered [ 3.464968@3] Registered swp emulation handler [ 3.468442@3] Registered cp15_barrier emulation handler [ 3.473611@3] Registered setend emulation handler [ 3.478269@3] disable EAS feature [ 3.482368@1] registered taskstats version 1 [ 3.495143@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.001411@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.001470@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.009626@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.018082@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.025058@1] hub 1-0:1.0: USB hub found [ 4.028011@1] hub 1-0:1.0: 1 port detected [ 4.032322@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.037621@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.045418@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.054418@2] hub 2-0:1.0: USB hub found [ 4.057497@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.064772@2] usb usb2: Unsupported the hub [ 4.069291@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.077317@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.185740@0] dwc_otg: Core Release: 3.10a [ 4.185777@0] dwc_otg: Setting default values for core params [ 4.189941@0] dwc_otg: curmode: 0, host_only: 0 [ 4.206732@0] dwc_otg: Using Buffer DMA mode [ 4.206755@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.210639@0] dwc_otg: Working on port type = SLAVE [ 4.215472@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.222493@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.232101@0] gxbb_pm: enter meson_pm_probe! [ 4.232140@0] no vddio3v3_en pin[ 4.233781@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.238848@0] gxbb_pm: meson_pm_probe done [ 4.24319[ 4.249468@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.254909@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.462970@1] ubi0: attaching mtd6 [ 4.991338@1] ubi0: scanning is finished [ 4.995629@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.995918@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.002922@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.009816@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.016883@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.023094@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.030423@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.039653@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.049061@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.054828@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.099609@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.101540@1] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.111563@1] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.122333@1] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.128291@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.308709@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.369581@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.454657@3] ubi1: attaching mtd7 [ 5.780949@3] ubi1: scanning is finished [ 5.784998@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.785113@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.792122@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.799009@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.806092@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.812203@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.819531@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.828763@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.838085@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.847433@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.871146@1] UBIFS (ubi1:0): recovery needed [ 5.902724@1] UBIFS (ubi1:0): recovery completed [ 5.902880@1] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.909067@1] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.919057@1] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.929750@1] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.936480@1] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f319d450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.969171@3] aml_tdm_open [ 6.979105@3] asoc-aml-card auge_sound: tdm prepare capture [ 6.979145@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.986219@3] aml_tdm_open [ 6.987363@3] Not init audio effects [ 6.992750@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 6.996624@2] cpufreq_interactive: no need to active hmp boost! Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.086272@3] asoc-aml-card auge_sound: tdm prepare capture [ 7.089935@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.096195@3] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.144826@3] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687460@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot Failed to open gpio value for reading! bypass gpio changed = -1 The system is going down NOW! Sent SIGTERM to all processes [ 13.263019@3] asoc-aml-card auge_sound: tdm playback stop [ 13.263461@1] asoc-aml-card auge_sound: tdm capture stop [ 13.268412@1] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.253738@2] mtd_nand_reboot_notifier 35 [ 15.254000@2] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.262290@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.265676@2] usb usb2: USB disconnect, device number 1 [ 15.274962@1] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.276230@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.281399@1] usb usb1: USB disconnect, device number 1 [ 15.287377@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.307313@0] reboot: Restarting system [ 15.307429@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21803 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 26 0c 40 18 00 30 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015873 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975107 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056094@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106549@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114515@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129136@0] ftrace: allocating 43519 entries in 170 pages [ 0.209531@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214668@0] ASID allocator initialised with 32768 entries [ 0.252650@0] secmon: can't fine clear_range [ 0.253240@0] EFI services will not be available. [ 0.256086@0] Meson chip version = RevC (25:C - 43:0) [ 0.290007@1] Detected VIPT I-cache on CPU1 [ 0.290069@1] CPU1: update cpu_capacity 1024 [ 0.290071@1] CPU1: Booted secondary processor [410fd034] [ 0.318073@2] Detected VIPT I-cache on CPU2 [ 0.318125@2] CPU2: update cpu_capacity 1024 [ 0.318128@2] CPU2: Booted secondary processor [410fd034] [ 0.346122@3] Detected VIPT I-cache on CPU3 [ 0.346170@3] CPU3: update cpu_capacity 1024 [ 0.346173@3] CPU3: Booted secondary processor [410fd034] [ 0.346264@0] Brought up 4 CPUs [ 0.385482@0] SMP: Total of 4 processors activated. [ 0.390391@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396427@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407391@0] CPU: All CPU(s) started at EL2 [ 0.408167@0] alternatives: patching kernel code [ 0.413575@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420704@0] devtmpfs: initialized [ 0.436153@0] DMI not present or invalid. [ 0.436540@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444535@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451094@0] pinctrl core: initialized pinctrl subsystem [ 0.457678@0] NET: Registered protocol family 16 [ 0.477035@0] cpuidle: using governor menu [ 0.477171@0] register canvas platform driver [ 0.479905@0] register rdma platform driver [ 0.485356@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491724@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499202@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505319@0] clkmsr: clkmsr: driver init [ 0.509039@0] codec_mm_module_init [ 0.512472@0] media_configs_system_init [ 0.516608@0] aml_watch_point_probe, in, wp:2 [ 0.522134@0] pstore: using zlib compression [ 0.525533@0] console [pstore-1] enabled [ 0.528860@0] pstore: Registered ramoops as persistent store backend [ 0.535273@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549306@0] aml_iomap: amlogic iomap probe done [ 0.553948@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555900@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564861@0] audio_clocks: audio_clocks_probe done [ 0.573463@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573520@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578687@0] amlogic auge_snd_iomap probe done [ 0.861730@0] vgaarb: loaded [ 0.862123@0] SCSI subsystem initialized [ 0.863253@0] usbcore: registered new interface driver usbfs [ 0.868711@0] usbcore: registered new interface driver hub [ 0.874246@0] usbcore: registered new device driver usb [ 0.879514@0] Linux video capture interface: v2.00 [ 0.884272@0] pps_core: LinuxPPS API ver. 1 registered [ 0.889342@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898760@0] PTP clock support registered [ 0.903226@0] dmi: Firmware registration failed. [ 0.911790@0] secmon: reserve_mem_size:0x300000 [ 0.912049@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.918992@0] secmon: get page:ffffffbf00140000, 5000 [ 0.923728@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.932121@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938851@0] fb: osd_init_module [ 0.943347@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.948935@0] Bluetooth: Core ver 2.22 [ 0.952032@0] NET: Registered protocol family 31 [ 0.956641@0] Bluetooth: HCI device and connection manager initialized [ 0.963191@0] Bluetooth: HCI socket layer initialized [ 0.968257@0] Bluetooth: L2CAP socket layer initialized [ 0.973581@0] Bluetooth: SCO socket layer initialized [ 0.982660@0] NetLabel: Initializing [ 0.982693@0] NetLabel: domain hash size = 128 [ 0.986723@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.991954@0] NetLabel: unlabeled traffic allowed by default [ 0.999399@1] clocksource: Switched to clocksource arch_sys_counter [ 1.099890@1] VFS: Disk quotas dquot_6.6.0 [ 1.099996@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118935@2] NET: Registered protocol family 2 [ 1.119717@2] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.125156@2] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131818@2] TCP: Hash tables configured (established 4096 bind 4096) [ 1.138436@2] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.144377@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.151016@2] NET: Registered protocol family 1 [ 1.155870@2] RPC: Registered named UNIX socket transport module. [ 1.161523@2] RPC: Registered udp transport module. [ 1.166393@2] RPC: Registered tcp transport module. [ 1.171294@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179358@2] Unpacking initramfs... [ 1.280952@2] Freeing initrd memory: 2308K [ 1.282337@2] hw perfevents: clusterb_enabled = 0 [ 1.284199@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.288634@2] hw perfevents: cluster A irq = 7 [ 1.293206@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.302557@2] audit: initializing netlink subsys (disabled) [ 1.306710@2] audit: type=2000 audit(1.076:1): initialized [ 1.313411@2] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.334307@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.336308@2] NFS: Registering the id_resolver key type [ 1.340014@2] Key type id_resolver registered [ 1.344326@2] Key type id_legacy registered [ 1.348850@2] fuse init (API version 7.26) [ 1.357424@2] NET: Registered protocol family 38 [ 1.357468@2] Key type asymmetric registered [ 1.361569@2] Asymmetric key parser 'x509' registered [ 1.366920@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.374299@2] io scheduler noop registered (default) [ 1.379238@2] io scheduler deadline registered [ 1.383988@2] io scheduler cfq registered [ 1.399172@2] Unable to detect cache hierarchy for CPU 0 [ 1.399352@2] random: fast init done [ 1.402703@2] random: crng init done [ 1.411000@1] loop: module loaded [ 1.416057@1] zram: Added device: zram0 [ 1.416526@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.421831@1] libphy: Fixed MDIO Bus: probed [ 1.425907@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.430476@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.438098@1] PPP generic driver version 2.4.2 [ 1.441590@1] PPP BSD Compression module registered [ 1.446222@1] PPP Deflate Compression module registered [ 1.451482@1] PPP MPPE Compression module registered [ 1.456442@1] NET: Registered protocol family 24 [ 1.461212@1] usbcore: registered new interface driver asix [ 1.466795@1] usbcore: registered new interface driver ax88179_178a [ 1.473068@1] usbcore: registered new interface driver cdc_ether [ 1.479101@1] usbcore: registered new interface driver net1080 [ 1.484947@1] usbcore: registered new interface driver cdc_subset [ 1.491069@1] usbcore: registered new interface driver zaurus [ 1.496864@1] usbcore: registered new interface driver cdc_ncm [ 1.503322@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.509398@1] ehci-pci: EHCI PCI platform driver [ 1.514127@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.520443@1] ohci-pci: OHCI PCI platform driver [ 1.525626@1] usbcore: registered new interface driver cdc_acm [ 1.530923@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.539226@1] usbcore: registered new interface driver usb-storage [ 1.545487@1] usbcore: registered new interface driver usbserial [ 1.551964@0] mousedev: PS/2 mouse device common for all mice [ 1.557539@0] usbcore: registered new interface driver xpad [ 1.562999@1] i2c /dev entries driver [ 1.566589@1] usbcore: registered new interface driver uvcvideo [ 1.572390@1] USB Video Class driver (1.1.1) [ 1.576658@1] md: linear personality registered for level -1 [ 1.582850@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.592504@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.598333@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.606099@0] usbcore: registered new interface driver usbhid [ 1.610032@0] usbhid: USB HID core driver [ 1.614284@0] ashmem: initialized [ 1.617749@3] logger: created 512K log 'log_main' [ 1.622289@0] logger: created 1K log 'log_events' [ 1.626990@3] logger: created 1K log 'log_radio' [ 1.631696@0] logger: created 16K log 'log_system' [ 1.636256@0] exFAT: Version 1.3.0 [ 1.641511@0] ff803000.serial: clock gate not found [ 1.644639@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.651803@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.666771@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.669358@0] console [ttyS0] enabled [ 1.669358@0] console [ttyS0] enabled [ 1.676567@0] bootconsole [aml_uart0] disabled [ 1.676567@0] bootconsole [aml_uart0] disabled [ 1.686080@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.692534@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.702788@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.712636@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.719129@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.731550@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.735594@3] irq = 20 [ 1.737936@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.746779@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.751172@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.756380@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.762870@3] meson-remote: Driver init [ 1.766828@3] meson-remote: remote_probe [ 1.770457@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.775500@3] meson-remote ff808040.rc: don't find the node [ 1.782054@3] meson-remote ff808040.rc: led_blink = 0 [ 1.787053@3] meson-remote ff808040.rc: don't find the node [ 1.793950@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.799595@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.805293@3] meson-remote ff808040.rc: custom_number = 3 [ 1.810611@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.816291@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.823449@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.829744@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.835891@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.841560@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.848718@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.855014@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.861158@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.866831@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.873989@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.880285@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.886415@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.893137@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.898915@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.904693@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.910386@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.916079@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.922030@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.927895@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.933501@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.938849@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.944196@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.950247@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.957210@1] meson-remote: IR XMP protocol handler initialized [ 1.962856@1] efusekeynum: 4 [ 1.965381@1] efusekeyname: mac offset: 0 size: 6 [ 1.971724@1] efusekeyname: mac_bt offset: 6 size: 6 [ 1.978104@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.984486@1] efusekeyname: usid offset: 18 size: 16 [ 1.991161@0] efuse efuse: probe OK! [ 1.997153@1] ge2d: ge2d_init_module [ 1.998432@1] [tsync_pcr_init]init success. [ 2.003027@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.009461@2] DI: di_module_init ok. [ 2.012591@2] dim:dim_module_init [ 2.015867@2] dim:dim_module_init finish [ 2.019513@2] dil:dil_init. [ 2.022440@2] dil:dil_init ok. [ 2.025382@2] vdin_drv_init: major 241 [ 2.029262@2] vdin_drv_init: vdin driver init done [ 2.033744@2] [viuin..]viuin_init_module viuin module init [ 2.039593@2] [viuin..]viuin_probe probe ok. [ 2.043645@2] amlvid:info: amlvideo_init called[ 2.047710@2] amlvid:info: amlvideo_create_instance called [ 2.053132@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.058478@0] amlvideo-000: V4L2 device registered as video10 [ 2.063943@0] amlvid:info: amlvideo_create_instance called [ 2.069351@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.074696@3] amlvideo-001: V4L2 device registered as video23 [ 2.080444@3] PPMGRDRV: warn: ppmgr module init func called [ 2.086681@3] videosync_create_instance dev_s ffffffc01c926000,dev_s->dev ffffffc01d430c00 [ 2.093878@3] videosync_create_instance reg videosync.0 [ 2.099117@3] aml_vecm_init:module init [ 2.099231@0] videosync_thread started [ 2.106855@3] amdolby_vision_init:module init [ 2.111136@3] prime_sl module init [ 2.114751@3] amlogic mtd driver init [ 2.118481@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.123691@3] bl mode descrete [ 2.126607@3] fip_copies 4 [ 2.129293@3] fip_size 0x200000 [ 2.132394@3] nand_clk_ctrl 0xffe07000 [ 2.136102@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.141733@3] nand_clk_ctrl 0xffe07000 [ 2.145432@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.153749@3] plat->aml_nand_device ffffff800a778cf8 [ 2.158291@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.164258@3] NAND device id: c2 dc 90 a2 57 3 [ 2.168452@3] NAND device: Manufacturer ID: [ 2.172507@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.179163@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.184661@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.190181@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.196484@3] mtd->oobavail: 0x10 [ 2.200123@2] aml_nand_init 2119: plat-name:bootloader [ 2.204866@2] Creating 1 MTD partitions on "bootloader": [ 2.210110@2] 0x000000000000-0x000000400000 : "bootloader" [ 2.217809@3] bootloader initialized ok [ 2.219334@3] plat->aml_nand_device ffffff800a778cf8 [ 2.224274@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.230302@3] NAND device id: c2 dc 90 a2 57 3 [ 2.234435@3] NAND device: Manufacturer ID: [ 2.238487@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.245152@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.250645@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.256163@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.262470@3] mtd->oobavail: 0x10 [ 2.265946@3] aml_nand_init 2119: plat-name:nandnormal [ 2.270853@3] bbt_start=20 [ 2.273497@3] env_start=24 [ 2.276172@3] key_start=32 [ 2.278836@3] dtb_start=40 [ 2.281518@3] ddr_start=44 [ 2.284194@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.290672@3] get_free_node 43: bitmap=0 [ 2.294112@3] get_free_node 55: bitmap=1 [ 2.298196@3] get_free_node 43: bitmap=1 [ 2.301874@3] get_free_node 55: bitmap=3 [ 2.305958@3] get_free_node 43: bitmap=3 [ 2.309636@3] get_free_node 55: bitmap=7 [ 2.313518@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.320157@3] nbbt free list: [ 2.323083@3] blockN=21, ec=-1, dirty_flag=0 [ 2.327317@3] blockN=22, ec=-1, dirty_flag=0 [ 2.331549@3] blockN=23, ec=-1, dirty_flag=0 [ 2.335771@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.341178@3] nbbt valid addr: 500000 [ 2.344397@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.350002@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.356243@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.362654@3] get_free_node 43: bitmap=7 [ 2.366130@3] get_free_node 55: bitmap=f [ 2.370214@3] get_free_node 43: bitmap=f [ 2.373893@3] get_free_node 55: bitmap=1f [ 2.378063@3] get_free_node 43: bitmap=1f [ 2.381828@3] get_free_node 55: bitmap=3f [ 2.385998@3] get_free_node 43: bitmap=3f [ 2.389763@3] get_free_node 55: bitmap=7f [ 2.393933@3] get_free_node 43: bitmap=7f [ 2.397698@3] get_free_node 55: bitmap=ff [ 2.401868@3] get_free_node 43: bitmap=ff [ 2.405632@3] get_free_node 55: bitmap=1ff [ 2.409889@3] get_free_node 43: bitmap=1ff [ 2.413739@3] get_free_node 55: bitmap=3ff [ 2.417794@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.424434@3] nenv free list: [ 2.427359@3] blockN=25, ec=-1, dirty_flag=0 [ 2.431593@3] blockN=26, ec=-1, dirty_flag=0 [ 2.435819@3] blockN=27, ec=-1, dirty_flag=0 [ 2.440046@3] blockN=28, ec=-1, dirty_flag=0 [ 2.444272@3] blockN=29, ec=-1, dirty_flag=0 [ 2.448498@3] blockN=30, ec=-1, dirty_flag=0 [ 2.452724@3] blockN=31, ec=-1, dirty_flag=0 [ 2.456950@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.468692@3] nenv valid addr: 610000 [ 2.468711@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.473145@3] get_free_node 43: bitmap=3ff [ 2.476997@3] get_free_node 55: bitmap=7ff [ 2.481253@3] get_free_node 43: bitmap=7ff [ 2.485104@3] get_free_node 55: bitmap=fff [ 2.489359@3] get_free_node 43: bitmap=fff [ 2.493211@3] get_free_node 55: bitmap=1fff [ 2.497554@3] get_free_node 43: bitmap=1fff [ 2.501491@3] get_free_node 55: bitmap=3fff [ 2.505834@3] get_free_node 43: bitmap=3fff [ 2.509771@3] get_free_node 55: bitmap=7fff [ 2.514114@3] get_free_node 43: bitmap=7fff [ 2.518051@3] get_free_node 55: bitmap=ffff [ 2.522393@3] get_free_node 43: bitmap=ffff [ 2.526331@3] get_free_node 55: bitmap=1ffff [ 2.530760@3] get_free_node 43: bitmap=1ffff [ 2.534783@3] get_free_node 55: bitmap=3ffff [ 2.539009@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.545650@3] nkey free list: [ 2.548583@3] blockN=32, ec=-1, dirty_flag=0 [ 2.552809@3] blockN=33, ec=-1, dirty_flag=0 [ 2.557035@3] blockN=34, ec=-1, dirty_flag=0 [ 2.561261@3] blockN=35, ec=-1, dirty_flag=0 [ 2.565487@3] blockN=36, ec=-1, dirty_flag=0 [ 2.569714@3] blockN=37, ec=-1, dirty_flag=0 [ 2.573940@3] blockN=38, ec=-1, dirty_flag=0 [ 2.578166@3] blockN=39, ec=-1, dirty_flag=0 [ 2.582392@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.587485@3] nkey valid addr: fffffffffffc0000 [ 2.591967@3] aml_nand_key_check 1251 NO key exist [ 2.596711@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.603327@3] get_free_node 43: bitmap=3ffff [ 2.607147@3] get_free_node 55: bitmap=7ffff [ 2.611583@3] get_free_node 43: bitmap=7ffff [ 2.615599@3] get_free_node 55: bitmap=fffff [ 2.620028@3] get_free_node 43: bitmap=fffff [ 2.624052@3] get_free_node 55: bitmap=1fffff [ 2.628365@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.635005@3] ndtb free list: [ 2.637938@3] blockN=41, ec=-1, dirty_flag=0 [ 2.642164@3] blockN=42, ec=-1, dirty_flag=0 [ 2.646390@3] blockN=43, ec=-1, dirty_flag=0 [ 2.650616@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.668631@3] ndtb valid addr: a00000 [ 2.668650@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.673081@3] get_free_node 43: bitmap=1fffff [ 2.677191@3] get_free_node 55: bitmap=3fffff [ 2.681706@3] get_free_node 43: bitmap=3fffff [ 2.685816@3] get_free_node 55: bitmap=7fffff [ 2.690128@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.696768@3] nddr free list: [ 2.699701@3] blockN=44, ec=-1, dirty_flag=0 [ 2.703927@3] blockN=45, ec=-1, dirty_flag=0 [ 2.708154@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.713242@3] nddr valid addr: fffffffffffc0000 [ 2.717728@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.722474@3] tpl: off 16777216, size 8388608 [ 2.788746@3] Creating 7 MTD partitions on "nandnormal": [ 2.788776@3] 0x000001000000-0x000001800000 : "tpl" [ 2.796152@0] 0x000001800000-0x000001a00000 : "misc" [ 2.799619@3] 0x000001a00000-0x000001c00000 : "logo" [ 2.804458@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.811551@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.816280@3] 0x000003b00000-0x000015300000 : "system" [ 2.855212@3] 0x000015300000-0x000020000000 : "data" [ 2.878422@3] nandnormal initialized ok [ 2.878501@3] aml_ubootenv_init: register env chardev [ 2.881873@3] aml_ubootenv_init: register env chardev OK [ 2.887088@3] amlnf_dtb_init: register dtb cdev [ 2.891595@3] amlnf_dtb_init: register dtd cdev OK [ 2.896154@3] mtd_nand_probe 267 , err = 0 [ 2.900876@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.906483@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.913285@3] unifykey: storage in base: 0xffffffc005000000 [ 2.918232@3] unifykey: storage out base: 0xffffffc005040000 [ 2.923821@3] unifykey: storage block base: 0xffffffc005080000 [ 2.929592@3] unifykey: probe done! [ 2.933482@3] unifykey: no efuse-version set, use default value: -1 [ 2.939270@3] unifykey: key unify config unifykey-num is 6 [ 2.944749@3] unifykey: key unify fact unifykey-num is 6 [ 2.949952@3] unifykey: unifykey_devno: ee00000 [ 2.954804@3] unifykey: device unifykeys created ok [ 2.959355@3] unifykey: aml_unifykeys_init done! [ 2.964132@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.970482@2] amlkaraoke init success! [ 2.973638@2] sysled: module init [ 2.977003@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.981973@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 2.989082@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 2.995633@3] amlogic rfkill init [ 3.000263@2] dmc_monitor_probe [ 3.002017@2] page_trace_module_init, create sysfs failed [ 3.007700@2] defendkey defendkey: Reserved memory is not enough! [ 3.013195@2] defendkey: probe of defendkey failed with error -22 [ 3.020175@2] usbcore: registered new interface driver snd-usb-audio [ 3.029420@2] asoc debug: aml_audio_controller_probe-130 [ 3.031291@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.036604@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.044454@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.051580@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.057941@2] aml_tdm_platform_probe(), share en = 1[ 3.062678@2] No channel mask node Channel_Mask [ 3.067500@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.072989@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.080946@2] aml_tdm_platform_probe(), share en = 1[ 3.085452@2] No channel mask node Channel_Mask [ 3.090198@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.095760@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.103694@2] aml_tdm_platform_probe(), share en = 1[ 3.108220@2] No channel mask node Channel_Mask [ 3.113801@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.120874@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.128956@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.138882@2] Register vad [ 3.140051@2] check whether to update sound card init data [ 3.145855@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.152832@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.160141@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.165756@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.173424@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.180756@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.186626@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.193116@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.200194@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.206173@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.213052@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.218872@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.225609@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.234192@3] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.240450@2] snd_card_add_kcontrols card:ffffffc01cf41818 [ 3.245470@2] effect_v2 is not init [ 3.248901@2] Failed to add VAD controls [ 3.253155@2] GACT probability NOT on [ 3.256426@2] Mirror/redirect action on [ 3.260196@2] u32 classifier [ 3.263026@2] Actions configured [ 3.266577@2] Netfilter messages via NETLINK v0.30. [ 3.271664@2] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.277857@2] ctnetlink v0.93: registering with nfnetlink. [ 3.283600@0] xt_time: kernel timezone is -0000 [ 3.287543@0] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.293740@0] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.298759@0] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.304322@0] Initializing XFRM netlink socket [ 3.309308@0] NET: Registered protocol family 10 [ 3.314493@0] mip6: Mobile IPv6 [ 3.316390@0] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.322165@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.329193@0] NET: Registered protocol family 17 [ 3.332527@0] NET: Registered protocol family 15 [ 3.337090@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.350205@0] Bluetooth: RFCOMM TTY layer initialized [ 3.355085@0] Bluetooth: RFCOMM socket layer initialized [ 3.360362@0] Bluetooth: RFCOMM ver 1.11 [ 3.364217@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.369644@0] Bluetooth: BNEP filters: protocol multicast [ 3.374995@0] Bluetooth: BNEP socket layer initialized [ 3.380079@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.386121@0] Bluetooth: HIDP socket layer initialized [ 3.391306@0] l2tp_core: L2TP core driver, V2.0 [ 3.395710@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.400606@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.406331@0] l2tp_netlink: L2TP netlink interface [ 3.411099@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.417115@0] l2tp_debugfs: L2TP debugfs support [ 3.421650@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.428255@0] NET: Registered protocol family 35 [ 3.433012@0] Key type dns_resolver registered [ 3.438185@0] Registered swp emulation handler [ 3.441602@0] Registered cp15_barrier emulation handler [ 3.446759@0] Registered setend emulation handler [ 3.451467@0] disable EAS feature [ 3.455597@0] registered taskstats version 1 [ 3.468314@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.974517@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.974575@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.982720@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.991193@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 3.998095@3] hub 1-0:1.0: USB hub found [ 4.001095@3] hub 1-0:1.0: 1 port detected [ 4.005449@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.010705@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.018521@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.027446@1] hub 2-0:1.0: USB hub found [ 4.030568@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.037907@1] usb usb2: Unsupported the hub [ 4.042327@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.050427@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.158966@1] dwc_otg: Core Release: 3.10a [ 4.159003@1] dwc_otg: Setting default values for core params [ 4.163167@1] dwc_otg: curmode: 0, host_only: 0 [ 4.179966@1] dwc_otg: Using Buffer DMA mode [ 4.179990@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.183875@1] dwc_otg: Working on port type = SLAVE [ 4.188709@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.195796@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.205252@1] gxbb_pm: enter meson_pm_probe! [ 4.205291@1] no vddio3v3_en pin[ 4.206929@1] pm-meson aml_pm: Can't get switch_clk81 [ 4.211990@1] gxbb_pm: meson_pm_probe done [ 4.21635S 4.222633@1] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.228052@1] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.436857@1] ubi0: attaching mtd6 [ 4.965384@1] ubi0: scanning is finished [ 4.969510@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.969799@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.976813@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 4.983696@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 4.990761@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 4.996977@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.004304@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.013535@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.022944@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.028512@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.073193@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.075121@0] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.085147@0] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.095921@0] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.101864@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.293034@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.350983@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.437941@1] ubi1: attaching mtd7 [ 5.764658@1] ubi1: scanning is finished [ 5.768522@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.768656@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.775664@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.782546@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.789618@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.795746@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.803073@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.812305@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.821629@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.830862@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.854563@1] UBIFS (ubi1:0): recovery needed [ 5.902230@2] UBIFS (ubi1:0): recovery completed [ 5.902387@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.908586@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.918565@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.929257@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.935986@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2cc7450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.966332@3] aml_tdm_open [ 6.975711@3] asoc-aml-card auge_sound: tdm prepare capture [ 6.975750@3] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.982315@3] aml_tdm_open [ 6.983976@3] Not init audio effects Opened TCP tuning[ 6.988974@2] cpufreq_interactive: cpufreq_hmp_boost_start() [ 6.994667@2] cpufreq_interactive: no need to active hmp boost! interface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.082539@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.086186@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.092055@2] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.141162@2] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687554@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22023 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015886 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1984042 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016838@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093892@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114514@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129135@0] ftrace: allocating 43519 entries in 170 pages [ 0.209507@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210317@0] CPU0: update cpu_capacity 1024 [ 0.214643@0] ASID allocator initialised with 32768 entries [ 0.252620@0] secmon: can't fine clear_range [ 0.253204@0] EFI services will not be available. [ 0.256049@0] Meson chip version = RevC (25:C - 43:0) [ 0.289972@1] Detected VIPT I-cache on CPU1 [ 0.290032@1] CPU1: update cpu_capacity 1024 [ 0.290035@1] CPU1: Booted secondary processor [410fd034] [ 0.318029@2] Detected VIPT I-cache on CPU2 [ 0.318082@2] CPU2: update cpu_capacity 1024 [ 0.318085@2] CPU2: Booted secondary processor [410fd034] [ 0.346089@3] Detected VIPT I-cache on CPU3 [ 0.346138@3] CPU3: update cpu_capacity 1024 [ 0.346141@3] CPU3: Booted secondary processor [410fd034] [ 0.346231@0] Brought up 4 CPUs [ 0.385447@0] SMP: Total of 4 processors activated. [ 0.390356@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396392@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407359@0] CPU: All CPU(s) started at EL2 [ 0.408132@0] alternatives: patching kernel code [ 0.413536@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420670@0] devtmpfs: initialized [ 0.436117@0] DMI not present or invalid. [ 0.436499@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444501@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451064@0] pinctrl core: initialized pinctrl subsystem [ 0.457675@0] NET: Registered protocol family 16 [ 0.485006@0] cpuidle: using governor menu [ 0.485154@0] register canvas platform driver [ 0.487875@0] register rdma platform driver [ 0.493326@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.499695@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.507179@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.513290@0] clkmsr: clkmsr: driver init [ 0.517005@0] codec_mm_module_init [ 0.520439@0] media_configs_system_init [ 0.524581@0] aml_watch_point_probe, in, wp:2 [ 0.529232@0] pstore: using zlib compression [ 0.533505@0] console [pstore-1] enabled [ 0.536832@0] pstore: Registered ramoops as persistent store backend [ 0.543246@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.557291@0] aml_iomap: amlogic iomap probe done [ 0.561968@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.563889@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.572851@0] audio_clocks: audio_clocks_probe done [ 0.581464@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.581519@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.586693@0] amlogic auge_snd_iomap probe done [ 0.865826@0] vgaarb: loaded [ 0.866216@0] SCSI subsystem initialized [ 0.867339@0] usbcore: registered new interface driver usbfs [ 0.872810@0] usbcore: registered new interface driver hub [ 0.878342@0] usbcore: registered new device driver usb [ 0.883615@0] Linux video capture interface: v2.00 [ 0.888396@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893440@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902827@0] PTP clock support registered [ 0.911175@0] dmi: Firmware registration failed. [ 0.911948@0] secmon: reserve_mem_size:0x300000 [ 0.916184@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.923066@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927823@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.936209@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942953@0] fb: osd_init_module [ 0.947405@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.953041@0] Bluetooth: Core ver 2.22 [ 0.956133@0] NET: Registered protocol family 31 [ 0.960736@0] Bluetooth: HCI device and connection manager initialized [ 0.967286@0] Bluetooth: HCI socket layer initialized [ 0.972352@0] Bluetooth: L2CAP socket layer initialized [ 0.977670@0] Bluetooth: SCO socket layer initialized [ 0.986750@0] NetLabel: Initializing [ 0.986782@0] NetLabel: domain hash size = 128 [ 0.990818@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996053@0] NetLabel: unlabeled traffic allowed by default [ 1.003519@1] clocksource: Switched to clocksource arch_sys_counter [ 1.103999@1] VFS: Disk quotas dquot_6.6.0 [ 1.104106@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.123078@1] NET: Registered protocol family 2 [ 1.123838@1] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.129310@1] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.135963@1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142556@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148505@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.155163@1] NET: Registered protocol family 1 [ 1.159973@1] RPC: Registered named UNIX socket transport module. [ 1.165651@1] RPC: Registered udp transport module. [ 1.170531@1] RPC: Registered tcp transport module. [ 1.175431@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.183573@1] Unpacking initramfs... [ 1.285010@1] Freeing initrd memory: 2308K [ 1.286415@1] hw perfevents: clusterb_enabled = 0 [ 1.288363@1] hw perfevents: cpumasks 0xf, 0x0 [ 1.292725@1] hw perfevents: cluster A irq = 7 [ 1.297236@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.306619@1] audit: initializing netlink subsys (disabled) [ 1.310771@1] audit: type=2000 audit(1.080:1): initialized [ 1.317436@1] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.334348@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.340365@1] NFS: Registering the id_resolver key type [ 1.340428@1] Key type id_resolver registered [ 1.344373@1] Key type id_legacy registered [ 1.348895@1] fuse init (API version 7.26) [ 1.357490@1] NET: Registered protocol family 38 [ 1.357533@1] Key type asymmetric registered [ 1.361607@1] Asymmetric key parser 'x509' registered [ 1.366959@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.374338@1] io scheduler noop registered (default) [ 1.379278@1] io scheduler deadline registered [ 1.383988@1] io scheduler cfq registered [ 1.398651@2] random: fast init done [ 1.398717@2] random: crng init done [ 1.399204@1] Unable to detect cache hierarchy for CPU 0 [ 1.439793@1] loop: module loaded [ 1.444889@1] zram: Added device: zram0 [ 1.445281@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.450513@1] libphy: Fixed MDIO Bus: probed [ 1.455340@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.459295@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.467014@1] PPP generic driver version 2.4.2 [ 1.470417@1] PPP BSD Compression module registered [ 1.475044@1] PPP Deflate Compression module registered [ 1.480302@1] PPP MPPE Compression module registered [ 1.485265@1] NET: Registered protocol family 24 [ 1.490045@1] usbcore: registered new interface driver asix [ 1.495626@1] usbcore: registered new interface driver ax88179_178a [ 1.501910@1] usbcore: registered new interface driver cdc_ether [ 1.507928@1] usbcore: registered new interface driver net1080 [ 1.513793@1] usbcore: registered new interface driver cdc_subset [ 1.519909@1] usbcore: registered new interface driver zaurus [ 1.525707@1] usbcore: registered new interface driver cdc_ncm [ 1.532160@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.538221@1] ehci-pci: EHCI PCI platform driver [ 1.542954@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.549269@1] ohci-pci: OHCI PCI platform driver [ 1.554456@1] usbcore: registered new interface driver cdc_acm [ 1.559748@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.568075@1] usbcore: registered new interface driver usb-storage [ 1.574316@1] usbcore: registered new interface driver usbserial [ 1.580847@2] mousedev: PS/2 mouse device common for all mice [ 1.586359@2] usbcore: registered new interface driver xpad [ 1.591840@1] i2c /dev entries driver [ 1.595394@1] usbcore: registered new interface driver uvcvideo [ 1.601225@1] USB Video Class driver (1.1.1) [ 1.605491@1] md: linear personality registered for level -1 [ 1.611719@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.621381@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.627179@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.634948@3] usbcore: registered new interface driver usbhid [ 1.638866@3] usbhid: USB HID core driver [ 1.643102@0] ashmem: initialized [ 1.646581@3] logger: created 512K log 'log_main' [ 1.651107@0] logger: created 1K log 'log_events' [ 1.655834@3] logger: created 1K log 'log_radio' [ 1.660464@0] logger: created 16K log 'log_system' [ 1.665090@0] exFAT: Version 1.3.0 [ 1.670061@2] ff803000.serial: clock gate not found [ 1.673484@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.680624@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.695603@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.698182@2] console [ttyS0] enabled [ 1.698182@2] console [ttyS0] enabled [ 1.705399@2] bootconsole [aml_uart0] disabled [ 1.705399@2] bootconsole [aml_uart0] disabled [ 1.714890@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.721349@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.731652@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.741434@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.747948@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.760418@0] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.764451@0] irq = 20 [ 1.766769@0] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.775611@0] aml_dma ff63e000.aml_dma: Aml dma [ 1.780026@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.785233@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.791703@0] meson-remote: Driver init [ 1.795660@0] meson-remote: remote_probe [ 1.799246@0] meson-remote ff808040.rc: protocol = 0x1 [ 1.804351@0] meson-remote ff808040.rc: don't find the node [ 1.810878@0] meson-remote ff808040.rc: led_blink = 0 [ 1.815889@0] meson-remote ff808040.rc: don't find the node [ 1.822786@0] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.828423@0] meson-remote ff808040.rc: platform_data irq =19 [ 1.834126@0] meson-remote ff808040.rc: custom_number = 3 [ 1.839441@0] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.845125@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.852278@0] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.858580@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.864723@0] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.870392@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.877549@0] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.883845@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.889990@0] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.895663@0] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.902821@0] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.909116@0] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.915246@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.921968@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.927746@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.933524@0] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.939217@0] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.944910@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.950861@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.956726@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.962332@0] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.967680@0] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.973027@0] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.979029@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.986006@0] meson-remote: IR XMP protocol handler initialized [ 1.991705@0] efusekeynum: 4 [ 1.994169@0] efusekeyname: mac offset: 0 size: 6 [ 2.000557@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.006940@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.013315@0] efusekeyname: usid offset: 18 size: 16 [ 2.019971@1] efuse efuse: probe OK! [ 2.025571@0] ge2d: ge2d_init_module [ 2.027258@0] [tsync_pcr_init]init success. [ 2.031880@1] vout: error: invalid vinfo1. current vmode is not supported [ 2.038278@1] DI: di_module_init ok. [ 2.041437@1] dim:dim_module_init [ 2.044703@1] dim:dim_module_init finish [ 2.048347@1] dil:dil_init. [ 2.051288@1] dil:dil_init ok. [ 2.054187@1] vdin_drv_init: major 241 [ 2.058106@1] vdin_drv_init: vdin driver init done [ 2.062580@1] [viuin..]viuin_init_module viuin module init [ 2.068401@1] [viuin..]viuin_probe probe ok. [ 2.072501@1] amlvid:info: amlvideo_init called[ 2.076550@1] amlvid:info: amlvideo_create_instance called [ 2.081966@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.087325@0] amlvideo-000: V4L2 device registered as video10 [ 2.092758@0] amlvid:info: amlvideo_create_instance called [ 2.098184@0] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.103552@1] amlvideo-001: V4L2 device registered as video23 [ 2.109267@1] PPMGRDRV: warn: ppmgr module init func called [ 2.115721@3] videosync_create_instance dev_s ffffffc01c899400,dev_s->dev ffffffc01cedc100 [ 2.122708@3] videosync_create_instance reg videosync.0 [ 2.127945@3] aml_vecm_init:module init [ 2.128054@1] videosync_thread started [ 2.135729@3] amdolby_vision_init:module init [ 2.139976@3] prime_sl module init [ 2.143582@3] amlogic mtd driver init [ 2.147263@3] prase_get_dtb_nand_parameter:128,parse dts start [ 2.152531@3] bl mode descrete [ 2.155439@3] fip_copies 4 [ 2.158137@3] fip_size 0x200000 [ 2.161230@3] nand_clk_ctrl 0xffe07000 [ 2.164934@3] prase_get_dtb_nand_parameter:234,parse dts end [ 2.170563@3] nand_clk_ctrl 0xffe07000 [ 2.174263@3] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.182590@3] plat->aml_nand_device ffffff800a778cf8 [ 2.187131@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.193090@3] NAND device id: c2 dc 90 a2 57 3 [ 2.197288@3] NAND device: Manufacturer ID: [ 2.201333@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.207992@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.213492@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.219012@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.225315@3] mtd->oobavail: 0x10 [ 2.229264@1] aml_nand_init 2119: plat-name:bootloader [ 2.233701@1] Creating 1 MTD partitions on "bootloader": [ 2.238942@1] 0x000000000000-0x000000400000 : "bootloader" [ 2.246427@3] bootloader initialized ok [ 2.248196@3] plat->aml_nand_device ffffff800a778cf8 [ 2.253086@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.259126@3] NAND device id: c2 dc 90 a2 57 3 [ 2.263264@3] NAND device: Manufacturer ID: [ 2.267324@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.273979@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.279473@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.284999@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.291300@3] mtd->oobavail: 0x10 [ 2.294777@3] aml_nand_init 2119: plat-name:nandnormal [ 2.299698@3] bbt_start=20 [ 2.302320@3] env_start=24 [ 2.305003@3] key_start=32 [ 2.307675@3] dtb_start=40 [ 2.310341@3] ddr_start=44 [ 2.313026@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.319511@3] get_free_node 43: bitmap=0 [ 2.322935@3] get_free_node 55: bitmap=1 [ 2.327027@3] get_free_node 43: bitmap=1 [ 2.330706@3] get_free_node 55: bitmap=3 [ 2.334790@3] get_free_node 43: bitmap=3 [ 2.338468@3] get_free_node 55: bitmap=7 [ 2.342349@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.348989@3] nbbt free list: [ 2.351922@3] blockN=21, ec=-1, dirty_flag=0 [ 2.356148@3] blockN=22, ec=-1, dirty_flag=0 [ 2.360374@3] blockN=23, ec=-1, dirty_flag=0 [ 2.364601@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.370016@3] nbbt valid addr: 500000 [ 2.373228@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.378832@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.385075@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.391485@3] get_free_node 43: bitmap=7 [ 2.394962@3] get_free_node 55: bitmap=f [ 2.399045@3] get_free_node 43: bitmap=f [ 2.402724@3] get_free_node 55: bitmap=1f [ 2.406894@3] get_free_node 43: bitmap=1f [ 2.410659@3] get_free_node 55: bitmap=3f [ 2.414829@3] get_free_node 43: bitmap=3f [ 2.418594@3] get_free_node 55: bitmap=7f [ 2.422764@3] get_free_node 43: bitmap=7f [ 2.426529@3] get_free_node 55: bitmap=ff [ 2.430699@3] get_free_node 43: bitmap=ff [ 2.434464@3] get_free_node 55: bitmap=1ff [ 2.438720@3] get_free_node 43: bitmap=1ff [ 2.442570@3] get_free_node 55: bitmap=3ff [ 2.446625@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.453265@3] nenv free list: [ 2.456198@3] blockN=25, ec=-1, dirty_flag=0 [ 2.460424@3] blockN=26, ec=-1, dirty_flag=0 [ 2.464650@3] blockN=27, ec=-1, dirty_flag=0 [ 2.468877@3] blockN=28, ec=-1, dirty_flag=0 [ 2.473103@3] blockN=29, ec=-1, dirty_flag=0 [ 2.477329@3] blockN=30, ec=-1, dirty_flag=0 [ 2.481556@3] blockN=31, ec=-1, dirty_flag=0 [ 2.485782@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.497538@3] nenv valid addr: 610000 [ 2.497558@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.501986@3] get_free_node 43: bitmap=3ff [ 2.505836@3] get_free_node 55: bitmap=7ff [ 2.510092@3] get_free_node 43: bitmap=7ff [ 2.513944@3] get_free_node 55: bitmap=fff [ 2.518199@3] get_free_node 43: bitmap=fff [ 2.522051@3] get_free_node 55: bitmap=1fff [ 2.526394@3] get_free_node 43: bitmap=1fff [ 2.530331@3] get_free_node 55: bitmap=3fff [ 2.534674@3] get_free_node 43: bitmap=3fff [ 2.538611@3] get_free_node 55: bitmap=7fff [ 2.542953@3] get_free_node 43: bitmap=7fff [ 2.546891@3] get_free_node 55: bitmap=ffff [ 2.551233@3] get_free_node 43: bitmap=ffff [ 2.555171@3] get_free_node 55: bitmap=1ffff [ 2.559600@3] get_free_node 43: bitmap=1ffff [ 2.563623@3] get_free_node 55: bitmap=3ffff [ 2.567850@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.574488@3] nkey free list: [ 2.577423@3] blockN=32, ec=-1, dirty_flag=0 [ 2.581649@3] blockN=33, ec=-1, dirty_flag=0 [ 2.585875@3] blockN=34, ec=-1, dirty_flag=0 [ 2.590101@3] blockN=35, ec=-1, dirty_flag=0 [ 2.594327@3] blockN=36, ec=-1, dirty_flag=0 [ 2.598554@3] blockN=37, ec=-1, dirty_flag=0 [ 2.602780@3] blockN=38, ec=-1, dirty_flag=0 [ 2.607006@3] blockN=39, ec=-1, dirty_flag=0 [ 2.611232@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.616321@3] nkey valid addr: fffffffffffc0000 [ 2.620806@3] aml_nand_key_check 1251 NO key exist [ 2.625555@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.632168@3] get_free_node 43: bitmap=3ffff [ 2.635987@3] get_free_node 55: bitmap=7ffff [ 2.640416@3] get_free_node 43: bitmap=7ffff [ 2.644439@3] get_free_node 55: bitmap=fffff [ 2.648868@3] get_free_node 43: bitmap=fffff [ 2.652892@3] get_free_node 55: bitmap=1fffff [ 2.657205@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.663845@3] ndtb free list: [ 2.666770@3] blockN=41, ec=-1, dirty_flag=0 [ 2.671004@3] blockN=42, ec=-1, dirty_flag=0 [ 2.675230@3] blockN=43, ec=-1, dirty_flag=0 [ 2.679457@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.697437@3] ndtb valid addr: a00000 [ 2.697457@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.701887@3] get_free_node 43: bitmap=1fffff [ 2.705996@3] get_free_node 55: bitmap=3fffff [ 2.710511@3] get_free_node 43: bitmap=3fffff [ 2.714621@3] get_free_node 55: bitmap=7fffff [ 2.718933@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.725573@3] nddr free list: [ 2.728506@3] blockN=44, ec=-1, dirty_flag=0 [ 2.732733@3] blockN=45, ec=-1, dirty_flag=0 [ 2.736959@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.742048@3] nddr valid addr: fffffffffffc0000 [ 2.746533@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.751279@3] tpl: off 16777216, size 8388608 [ 2.817559@3] Creating 7 MTD partitions on "nandnormal": [ 2.817588@3] 0x000001000000-0x000001800000 : "tpl" [ 2.825151@3] 0x000001800000-0x000001a00000 : "misc" [ 2.828437@0] 0x000001a00000-0x000001c00000 : "logo" [ 2.833317@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.840343@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.845172@3] 0x000003b00000-0x000015300000 : "system" [ 2.884080@3] 0x000015300000-0x000020000000 : "data" [ 2.907545@3] nandnormal initialized ok [ 2.907638@3] aml_ubootenv_init: register env chardev [ 2.910991@3] aml_ubootenv_init: register env chardev OK [ 2.916225@3] amlnf_dtb_init: register dtb cdev [ 2.920738@3] amlnf_dtb_init: register dtd cdev OK [ 2.925292@3] mtd_nand_probe 267 , err = 0 [ 2.930003@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.935629@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.942416@3] unifykey: storage in base: 0xffffffc005000000 [ 2.947364@3] unifykey: storage out base: 0xffffffc005040000 [ 2.952948@3] unifykey: storage block base: 0xffffffc005080000 [ 2.958725@3] unifykey: probe done! [ 2.962613@3] unifykey: no efuse-version set, use default value: -1 [ 2.968402@3] unifykey: key unify config unifykey-num is 6 [ 2.973860@3] unifykey: key unify fact unifykey-num is 6 [ 2.979084@3] unifykey: unifykey_devno: ee00000 [ 2.983852@3] unifykey: device unifykeys created ok [ 2.988479@3] unifykey: aml_unifykeys_init done! [ 2.993270@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.999616@2] amlkaraoke init success! [ 3.002730@2] sysled: module init [ 3.006148@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.011100@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.018252@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.024751@3] amlogic rfkill init [ 3.029433@1] dmc_monitor_probe [ 3.031141@1] page_trace_module_init, create sysfs failed [ 3.036822@1] defendkey defendkey: Reserved memory is not enough! [ 3.042344@1] defendkey: probe of defendkey failed with error -22 [ 3.049395@1] usbcore: registered new interface driver snd-usb-audio [ 3.058593@1] asoc debug: aml_audio_controller_probe-130 [ 3.060444@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.065735@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.073522@1] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.080699@1] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.087071@1] aml_tdm_platform_probe(), share en = 1[ 3.091815@1] No channel mask node Channel_Mask [ 3.096583@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.102128@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.110080@1] aml_tdm_platform_probe(), share en = 1[ 3.114587@1] No channel mask node Channel_Mask [ 3.119299@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.124893@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.132852@1] aml_tdm_platform_probe(), share en = 1[ 3.137354@1] No channel mask node Channel_Mask [ 3.142934@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.150009@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.158091@1] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.168031@1] Register vad [ 3.169126@1] check whether to update sound card init data [ 3.175009@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.181985@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.189277@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.194887@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.202559@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.209890@1] aml_dai_tdm_probe, failed add snd tdm controls [ 3.215772@1] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.222251@1] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.229425@1] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.235306@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.242162@1] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.248000@1] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.254728@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.262355@0] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.269550@3] snd_card_add_kcontrols card:ffffffc01c893018 [ 3.274610@3] effect_v2 is not init [ 3.278055@3] Failed to add VAD controls [ 3.282280@3] GACT probability NOT on [ 3.285557@3] Mirror/redirect action on [ 3.289336@3] u32 classifier [ 3.292173@3] Actions configured [ 3.295713@3] Netfilter messages via NETLINK v0.30. [ 3.300798@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.306987@3] ctnetlink v0.93: registering with nfnetlink. [ 3.312712@2] xt_time: kernel timezone is -0000 [ 3.316692@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.322881@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.327886@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.333463@2] Initializing XFRM netlink socket [ 3.338464@2] NET: Registered protocol family 10 [ 3.343675@2] mip6: Mobile IPv6 [ 3.345495@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.351316@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.358354@2] NET: Registered protocol family 17 [ 3.361668@2] NET: Registered protocol family 15 [ 3.366222@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.379347@2] Bluetooth: RFCOMM TTY layer initialized [ 3.384220@2] Bluetooth: RFCOMM socket layer initialized [ 3.389496@2] Bluetooth: RFCOMM ver 1.11 [ 3.393352@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.398774@2] Bluetooth: BNEP filters: protocol multicast [ 3.404129@2] Bluetooth: BNEP socket layer initialized [ 3.409216@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.415254@2] Bluetooth: HIDP socket layer initialized [ 3.420422@2] l2tp_core: L2TP core driver, V2.0 [ 3.424837@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.429738@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.435465@2] l2tp_netlink: L2TP netlink interface [ 3.440237@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.446251@2] l2tp_debugfs: L2TP debugfs support [ 3.450784@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.457388@2] NET: Registered protocol family 35 [ 3.462154@2] Key type dns_resolver registered [ 3.467322@2] Registered swp emulation handler [ 3.470801@2] Registered cp15_barrier emulation handler [ 3.475890@2] Registered setend emulation handler [ 3.480601@2] disable EAS feature [ 3.484706@1] registered taskstats version 1 [ 3.497453@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.003651@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.003713@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.011822@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.020326@1] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.027209@2] hub 1-0:1.0: USB hub found [ 4.030238@2] hub 1-0:1.0: 1 port detected [ 4.034568@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.039860@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.047656@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.056588@1] hub 2-0:1.0: USB hub found [ 4.059753@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.067015@1] usb usb2: Unsupported the hub [ 4.071453@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.079561@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.188137@1] dwc_otg: Core Release: 3.10a [ 4.188172@1] dwc_otg: Setting default values for core params [ 4.192334@1] dwc_otg: curmode: 0, host_only: 0 [ 4.209133@1] dwc_otg: Using Buffer DMA mode [ 4.209156@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.213034@1] dwc_otg: Working on port type = SLAVE [ 4.217867@1] dwc_otg: Dedicated Tx FIFOs mode [ 4.224995@1] cpucore_cooling_register, max_cpu_core_num:4 [ 4.234265@0] gxbb_pm: enter meson_pm_probe! [ 4.234304@0] no vddio3v3_en pin[ 4.235989@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.240982@0] gxbb_pm: meson_pm_probe done [ 4.24536[ 4.251628@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.257057@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.466250@1] ubi0: attaching mtd6 [ 4.994852@1] ubi0: scanning is finished [ 4.999104@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.999390@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.006401@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.013289@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.020357@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.026566@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.033896@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.043126@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.052536@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.058327@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.103044@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.104999@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.114982@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.125759@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.131712@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.301252@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.359165@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.445067@2] ubi1: attaching mtd7 [ 5.771679@2] ubi1: scanning is finished [ 5.775501@0] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.775676@0] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.782668@0] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.789570@0] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.796637@0] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.802764@0] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.810092@0] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.819324@0] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.828645@2] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.837981@0] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.861695@1] UBIFS (ubi1:0): recovery needed [ 5.910252@2] UBIFS (ubi1:0): recovery completed [ 5.910415@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.916590@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.926584@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.937276@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.944006@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2b9b450 --- 0 [ 6.963009@2] aml_tdm_open [ 6.971416@2] asoc-aml-card auge_sound: tdm prepare capture [ 6.971452@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.979593@2] aml_tdm_open [ 6.979639@2] Not init audio effects OK skip network Init because /sys/class/net/eth0 is not exist Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.002640@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.002694@0] cpufreq_interactive: no need to active hmp boost! Audio Stop Callback: Stopping audio stream # Audio Start Callback: Starting audio stream [ 7.077224@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.080900@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.087157@0] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.135962@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.691664@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot The system is going down NOW! Sent SIGTERM to all processes [ 14.301174@3] asoc-aml-card auge_sound: tdm playback stop [ 14.301512@3] asoc-aml-card auge_sound: tdm capture stop [ 14.306307@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 16.296428@1] mtd_nand_reboot_notifier 35 [ 16.296692@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 16.304867@1] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.308370@1] usb usb2: USB disconnect, device number 1 [ 16.317765@2] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.318940@2] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.324114@2] usb usb1: USB disconnect, device number 1 [ 16.330098@3] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.351527@0] reboot: Restarting system [ 16.351637@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21793 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 19 02 31 27 0e 41 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015881 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975615 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016837@0] Console: colour dummy device 80x25 [ 0.021109@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036445@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106550@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114512@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121285@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129131@0] ftrace: allocating 43519 entries in 170 pages [ 0.209569@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210378@0] CPU0: update cpu_capacity 1024 [ 0.214704@0] ASID allocator initialised with 32768 entries [ 0.252689@0] secmon: can't fine clear_range [ 0.253275@0] EFI services will not be available. [ 0.256119@0] Meson chip version = RevC (25:C - 43:0) [ 0.290048@1] Detected VIPT I-cache on CPU1 [ 0.290108@1] CPU1: update cpu_capacity 1024 [ 0.290111@1] CPU1: Booted secondary processor [410fd034] [ 0.318113@2] Detected VIPT I-cache on CPU2 [ 0.318166@2] CPU2: update cpu_capacity 1024 [ 0.318168@2] CPU2: Booted secondary processor [410fd034] [ 0.346169@3] Detected VIPT I-cache on CPU3 [ 0.346219@3] CPU3: update cpu_capacity 1024 [ 0.346222@3] CPU3: Booted secondary processor [410fd034] [ 0.346313@0] Brought up 4 CPUs [ 0.385534@0] SMP: Total of 4 processors activated. [ 0.390444@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396479@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407440@0] CPU: All CPU(s) started at EL2 [ 0.408219@0] alternatives: patching kernel code [ 0.413626@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420757@0] devtmpfs: initialized [ 0.436213@0] DMI not present or invalid. [ 0.436594@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444599@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451160@0] pinctrl core: initialized pinctrl subsystem [ 0.457690@0] NET: Registered protocol family 16 [ 0.477091@0] cpuidle: using governor menu [ 0.477231@0] register canvas platform driver [ 0.479963@0] register rdma platform driver [ 0.485409@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491777@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499275@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505367@0] clkmsr: clkmsr: driver init [ 0.509092@0] codec_mm_module_init [ 0.512524@0] media_configs_system_init [ 0.516658@0] aml_watch_point_probe, in, wp:2 [ 0.522181@0] pstore: using zlib compression [ 0.525589@0] console [pstore-1] enabled [ 0.528913@0] pstore: Registered ramoops as persistent store backend [ 0.535329@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549354@0] aml_iomap: amlogic iomap probe done [ 0.554037@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555954@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564895@0] audio_clocks: audio_clocks_probe done [ 0.573438@0] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573498@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578668@0] amlogic auge_snd_iomap probe done [ 0.865763@0] vgaarb: loaded [ 0.866148@0] SCSI subsystem initialized [ 0.867289@0] usbcore: registered new interface driver usbfs [ 0.872758@0] usbcore: registered new interface driver hub [ 0.878267@0] usbcore: registered new device driver usb [ 0.883543@0] Linux video capture interface: v2.00 [ 0.888323@0] pps_core: LinuxPPS API ver. 1 registered [ 0.893381@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.902800@0] PTP clock support registered [ 0.907280@0] dmi: Firmware registration failed. [ 0.911943@0] secmon: reserve_mem_size:0x300000 [ 0.916114@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.923007@0] secmon: get page:ffffffbf00140000, 5000 [ 0.927756@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.936153@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.942885@0] fb: osd_init_module [ 0.947353@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.952991@0] Bluetooth: Core ver 2.22 [ 0.956074@0] NET: Registered protocol family 31 [ 0.960675@0] Bluetooth: HCI device and connection manager initialized [ 0.967228@0] Bluetooth: HCI socket layer initialized [ 0.972291@0] Bluetooth: L2CAP socket layer initialized [ 0.977614@0] Bluetooth: SCO socket layer initialized [ 0.983164@0] NetLabel: Initializing [ 0.986192@0] NetLabel: domain hash size = 128 [ 0.990840@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.995995@0] NetLabel: unlabeled traffic allowed by default [ 1.003370@0] clocksource: Switched to clocksource arch_sys_counter [ 1.104070@0] VFS: Disk quotas dquot_6.6.0 [ 1.104174@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.122738@0] NET: Registered protocol family 2 [ 1.123343@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.128958@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.135653@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.142385@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.148171@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.154859@3] NET: Registered protocol family 1 [ 1.159727@0] RPC: Registered named UNIX socket transport module. [ 1.165327@0] RPC: Registered udp transport module. [ 1.170200@0] RPC: Registered tcp transport module. [ 1.175099@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.183129@0] Unpacking initramfs... [ 1.284785@0] Freeing initrd memory: 2308K [ 1.286180@0] hw perfevents: clusterb_enabled = 0 [ 1.288135@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.292495@0] hw perfevents: cluster A irq = 7 [ 1.297008@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.306410@0] audit: initializing netlink subsys (disabled) [ 1.310541@0] audit: type=2000 audit(1.076:1): initialized [ 1.317208@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.338131@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.344127@0] NFS: Registering the id_resolver key type [ 1.344191@0] Key type id_resolver registered [ 1.348165@0] Key type id_legacy registered [ 1.352650@0] fuse init (API version 7.26) [ 1.361349@0] NET: Registered protocol family 38 [ 1.361394@0] Key type asymmetric registered [ 1.365396@0] Asymmetric key parser 'x509' registered [ 1.370732@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.378132@0] io scheduler noop registered (default) [ 1.383056@0] io scheduler deadline registered [ 1.387780@0] io scheduler cfq registered [ 1.402993@0] Unable to detect cache hierarchy for CPU 0 [ 1.403163@0] random: fast init done [ 1.406536@0] random: crng init done [ 1.423139@1] loop: module loaded [ 1.428187@1] zram: Added device: zram0 [ 1.428648@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.434005@1] libphy: Fixed MDIO Bus: probed [ 1.437881@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.442593@1] tun: (C) 1999-2004 Max Krasnyansky [ 1.450167@1] PPP generic driver version 2.4.2 [ 1.453746@1] PPP BSD Compression module registered [ 1.458341@1] PPP Deflate Compression module registered [ 1.463592@1] PPP MPPE Compression module registered [ 1.468565@1] NET: Registered protocol family 24 [ 1.473335@1] usbcore: registered new interface driver asix [ 1.478921@1] usbcore: registered new interface driver ax88179_178a [ 1.485204@1] usbcore: registered new interface driver cdc_ether [ 1.491221@1] usbcore: registered new interface driver net1080 [ 1.497071@1] usbcore: registered new interface driver cdc_subset [ 1.503196@1] usbcore: registered new interface driver zaurus [ 1.508993@1] usbcore: registered new interface driver cdc_ncm [ 1.515488@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.521512@1] ehci-pci: EHCI PCI platform driver [ 1.526250@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.532564@1] ohci-pci: OHCI PCI platform driver [ 1.537751@1] usbcore: registered new interface driver cdc_acm [ 1.543043@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.551369@1] usbcore: registered new interface driver usb-storage [ 1.557623@1] usbcore: registered new interface driver usbserial [ 1.564099@3] mousedev: PS/2 mouse device common for all mice [ 1.569727@3] usbcore: registered new interface driver xpad [ 1.575154@0] i2c /dev entries driver [ 1.578723@0] usbcore: registered new interface driver uvcvideo [ 1.584516@0] USB Video Class driver (1.1.1) [ 1.588798@0] md: linear personality registered for level -1 [ 1.594988@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.604635@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.610455@3] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.618195@1] usbcore: registered new interface driver usbhid [ 1.622167@1] usbhid: USB HID core driver [ 1.626412@3] ashmem: initialized [ 1.629883@1] logger: created 512K log 'log_main' [ 1.634407@3] logger: created 1K log 'log_events' [ 1.639144@1] logger: created 1K log 'log_radio' [ 1.643805@3] logger: created 16K log 'log_system' [ 1.648391@3] exFAT: Version 1.3.0 [ 1.653089@2] ff803000.serial: clock gate not found [ 1.656780@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.663925@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.678899@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.681517@2] console [ttyS0] enabled [ 1.681517@2] console [ttyS0] enabled [ 1.688735@2] bootconsole [aml_uart0] disabled [ 1.688735@2] bootconsole [aml_uart0] disabled [ 1.698182@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.704644@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.714937@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.724731@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.731264@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.743732@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.747741@3] irq = 20 [ 1.750069@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.758875@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.763316@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.768547@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.774993@3] meson-remote: Driver init [ 1.778962@3] meson-remote: remote_probe [ 1.782582@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.787642@3] meson-remote ff808040.rc: don't find the node [ 1.794180@3] meson-remote ff808040.rc: led_blink = 0 [ 1.799178@3] meson-remote ff808040.rc: don't find the node [ 1.806081@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.811722@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.817423@3] meson-remote ff808040.rc: custom_number = 3 [ 1.822737@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.828420@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.835576@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.841872@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.848021@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.853688@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.860846@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.867142@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.873291@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.878959@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.886117@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.892413@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.898542@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.905265@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.911042@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.916821@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.922513@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.928206@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.934157@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.940023@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.945629@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.950976@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.956324@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.962390@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.969332@0] meson-remote: IR XMP protocol handler initialized [ 1.974979@0] efusekeynum: 4 [ 1.977511@0] efusekeyname: mac offset: 0 size: 6 [ 1.983859@0] efusekeyname: mac_bt offset: 6 size: 6 [ 1.990231@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.996617@0] efusekeyname: usid offset: 18 size: 16 [ 2.003282@2] efuse efuse: probe OK! [ 2.008842@1] ge2d: ge2d_init_module [ 2.010571@1] [tsync_pcr_init]init success. [ 2.015127@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.021581@2] DI: di_module_init ok. [ 2.024718@2] dim:dim_module_init [ 2.027972@2] dim:dim_module_init finish [ 2.031710@2] dil:dil_init. [ 2.034580@2] dil:dil_init ok. [ 2.037461@2] vdin_drv_init: major 241 [ 2.041369@2] vdin_drv_init: vdin driver init done [ 2.045865@2] [viuin..]viuin_init_module viuin module init [ 2.051707@2] [viuin..]viuin_probe probe ok. [ 2.055799@2] amlvid:info: amlvideo_init called[ 2.059841@2] amlvid:info: amlvideo_create_instance called [ 2.065260@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.070613@1] amlvideo-000: V4L2 device registered as video10 [ 2.076066@1] amlvid:info: amlvideo_create_instance called [ 2.081474@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.086815@3] amlvideo-001: V4L2 device registered as video23 [ 2.092557@3] PPMGRDRV: warn: ppmgr module init func called [ 2.098706@0] videosync_create_instance dev_s ffffffc01cf8e000,dev_s->dev ffffffc01c989580 [ 2.106009@0] videosync_create_instance reg videosync.0 [ 2.111242@0] aml_vecm_init:module init [ 2.111251@3] videosync_thread started [ 2.119002@0] amdolby_vision_init:module init [ 2.123244@0] prime_sl module init [ 2.126904@0] amlogic mtd driver init [ 2.130600@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.135825@0] bl mode descrete [ 2.138735@0] fip_copies 4 [ 2.141419@0] fip_size 0x200000 [ 2.144525@0] nand_clk_ctrl 0xffe07000 [ 2.148229@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.153863@0] nand_clk_ctrl 0xffe07000 [ 2.157559@0] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.165883@0] plat->aml_nand_device ffffff800a778cf8 [ 2.170402@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.176384@0] NAND device id: c2 dc 90 a2 57 3 [ 2.180581@0] NAND device: Manufacturer ID: [ 2.184630@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.191288@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.196788@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.202310@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.208610@0] mtd->oobavail: 0x10 [ 2.212204@0] aml_nand_init 2119: plat-name:bootloader [ 2.216985@0] Creating 1 MTD partitions on "bootloader": [ 2.222237@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.230049@3] bootloader initialized ok [ 2.231492@3] plat->aml_nand_device ffffff800a778cf8 [ 2.236393@3] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.242423@3] NAND device id: c2 dc 90 a2 57 3 [ 2.246563@3] NAND device: Manufacturer ID: [ 2.250620@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.257276@3] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.262770@3] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.268296@3] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.274596@3] mtd->oobavail: 0x10 [ 2.278073@3] aml_nand_init 2119: plat-name:nandnormal [ 2.282995@3] bbt_start=20 [ 2.285627@3] env_start=24 [ 2.288299@3] key_start=32 [ 2.290964@3] dtb_start=40 [ 2.293646@3] ddr_start=44 [ 2.296327@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.302800@3] get_free_node 43: bitmap=0 [ 2.306240@3] get_free_node 55: bitmap=1 [ 2.310324@3] get_free_node 43: bitmap=1 [ 2.314002@3] get_free_node 55: bitmap=3 [ 2.318086@3] get_free_node 43: bitmap=3 [ 2.321764@3] get_free_node 55: bitmap=7 [ 2.325646@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.332286@3] nbbt free list: [ 2.335211@3] blockN=21, ec=-1, dirty_flag=0 [ 2.339445@3] blockN=22, ec=-1, dirty_flag=0 [ 2.343671@3] blockN=23, ec=-1, dirty_flag=0 [ 2.347897@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.353306@3] nbbt valid addr: 500000 [ 2.356524@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.362129@3] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.368371@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.374782@3] get_free_node 43: bitmap=7 [ 2.378258@3] get_free_node 55: bitmap=f [ 2.382342@3] get_free_node 43: bitmap=f [ 2.386021@3] get_free_node 55: bitmap=1f [ 2.390191@3] get_free_node 43: bitmap=1f [ 2.393955@3] get_free_node 55: bitmap=3f [ 2.398126@3] get_free_node 43: bitmap=3f [ 2.401891@3] get_free_node 55: bitmap=7f [ 2.406061@3] get_free_node 43: bitmap=7f [ 2.409825@3] get_free_node 55: bitmap=ff [ 2.413995@3] get_free_node 43: bitmap=ff [ 2.417761@3] get_free_node 55: bitmap=1ff [ 2.422017@3] get_free_node 43: bitmap=1ff [ 2.425867@3] get_free_node 55: bitmap=3ff [ 2.429922@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.436562@3] nenv free list: [ 2.439495@3] blockN=25, ec=-1, dirty_flag=0 [ 2.443721@3] blockN=26, ec=-1, dirty_flag=0 [ 2.447947@3] blockN=27, ec=-1, dirty_flag=0 [ 2.452173@3] blockN=28, ec=-1, dirty_flag=0 [ 2.456400@3] blockN=29, ec=-1, dirty_flag=0 [ 2.460626@3] blockN=30, ec=-1, dirty_flag=0 [ 2.464852@3] blockN=31, ec=-1, dirty_flag=0 [ 2.469078@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.480825@3] nenv valid addr: 610000 [ 2.480845@3] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.485273@3] get_free_node 43: bitmap=3ff [ 2.489130@3] get_free_node 55: bitmap=7ff [ 2.493380@3] get_free_node 43: bitmap=7ff [ 2.497231@3] get_free_node 55: bitmap=fff [ 2.501488@3] get_free_node 43: bitmap=fff [ 2.505339@3] get_free_node 55: bitmap=1fff [ 2.509681@3] get_free_node 43: bitmap=1fff [ 2.513619@3] get_free_node 55: bitmap=3fff [ 2.517961@3] get_free_node 43: bitmap=3fff [ 2.521899@3] get_free_node 55: bitmap=7fff [ 2.526241@3] get_free_node 43: bitmap=7fff [ 2.530179@3] get_free_node 55: bitmap=ffff [ 2.534522@3] get_free_node 43: bitmap=ffff [ 2.538459@3] get_free_node 55: bitmap=1ffff [ 2.542888@3] get_free_node 43: bitmap=1ffff [ 2.546911@3] get_free_node 55: bitmap=3ffff [ 2.551137@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.557781@3] nkey free list: [ 2.560711@3] blockN=32, ec=-1, dirty_flag=0 [ 2.564937@3] blockN=33, ec=-1, dirty_flag=0 [ 2.569163@3] blockN=34, ec=-1, dirty_flag=0 [ 2.573389@3] blockN=35, ec=-1, dirty_flag=0 [ 2.577615@3] blockN=36, ec=-1, dirty_flag=0 [ 2.581842@3] blockN=37, ec=-1, dirty_flag=0 [ 2.586068@3] blockN=38, ec=-1, dirty_flag=0 [ 2.590294@3] blockN=39, ec=-1, dirty_flag=0 [ 2.594520@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.599609@3] nkey valid addr: fffffffffffc0000 [ 2.604099@3] aml_nand_key_check 1251 NO key exist [ 2.608839@3] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.615454@3] get_free_node 43: bitmap=3ffff [ 2.619267@3] get_free_node 55: bitmap=7ffff [ 2.623705@3] get_free_node 43: bitmap=7ffff [ 2.627737@3] get_free_node 55: bitmap=fffff [ 2.632160@3] get_free_node 43: bitmap=fffff [ 2.636180@3] get_free_node 55: bitmap=1fffff [ 2.640492@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.647132@3] ndtb free list: [ 2.650065@3] blockN=41, ec=-1, dirty_flag=0 [ 2.654292@3] blockN=42, ec=-1, dirty_flag=0 [ 2.658518@3] blockN=43, ec=-1, dirty_flag=0 [ 2.662744@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.680732@3] ndtb valid addr: a00000 [ 2.680752@3] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.685183@3] get_free_node 43: bitmap=1fffff [ 2.689293@3] get_free_node 55: bitmap=3fffff [ 2.693807@3] get_free_node 43: bitmap=3fffff [ 2.697918@3] get_free_node 55: bitmap=7fffff [ 2.702230@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.708870@3] nddr free list: [ 2.711803@3] blockN=44, ec=-1, dirty_flag=0 [ 2.716029@3] blockN=45, ec=-1, dirty_flag=0 [ 2.720256@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.725345@3] nddr valid addr: fffffffffffc0000 [ 2.729830@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.734576@3] tpl: off 16777216, size 8388608 [ 2.800862@3] Creating 7 MTD partitions on "nandnormal": [ 2.800891@3] 0x000001000000-0x000001800000 : "tpl" [ 2.808181@3] 0x000001800000-0x000001a00000 : "misc" [ 2.811792@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.816666@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.823676@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.828472@3] 0x000003b00000-0x000015300000 : "system" [ 2.867390@3] 0x000015300000-0x000020000000 : "data" [ 2.890574@3] nandnormal initialized ok [ 2.890654@3] aml_ubootenv_init: register env chardev [ 2.894015@3] aml_ubootenv_init: register env chardev OK [ 2.899241@3] amlnf_dtb_init: register dtb cdev [ 2.903757@3] amlnf_dtb_init: register dtd cdev OK [ 2.908309@3] mtd_nand_probe 267 , err = 0 [ 2.913021@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.918642@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.925439@3] unifykey: storage in base: 0xffffffc005000000 [ 2.930385@3] unifykey: storage out base: 0xffffffc005040000 [ 2.935968@3] unifykey: storage block base: 0xffffffc005080000 [ 2.941749@3] unifykey: probe done! [ 2.945648@3] unifykey: no efuse-version set, use default value: -1 [ 2.951429@3] unifykey: key unify config unifykey-num is 6 [ 2.956882@3] unifykey: key unify fact unifykey-num is 6 [ 2.962106@3] unifykey: unifykey_devno: ee00000 [ 2.966865@3] unifykey: device unifykeys created ok [ 2.971516@3] unifykey: aml_unifykeys_init done! [ 2.976283@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.982619@3] amlkaraoke init success! [ 2.985770@3] sysled: module init [ 2.989169@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 2.994122@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.001247@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.007771@3] amlogic rfkill init [ 3.012415@3] dmc_monitor_probe [ 3.014163@3] page_trace_module_init, create sysfs failed [ 3.027900@3] defendkey defendkey: Reserved memory is not enough! [ 3.028368@3] defendkey: probe of defendkey failed with error -22 [ 3.035409@3] usbcore: registered new interface driver snd-usb-audio [ 3.044664@3] asoc debug: aml_audio_controller_probe-130 [ 3.046446@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.051795@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.059584@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.066751@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.073131@3] aml_tdm_platform_probe(), share en = 1[ 3.077894@3] No channel mask node Channel_Mask [ 3.082674@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.088185@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.096150@3] aml_tdm_platform_probe(), share en = 1[ 3.100644@3] No channel mask node Channel_Mask [ 3.105404@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.110951@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.118908@3] aml_tdm_platform_probe(), share en = 1[ 3.123413@3] No channel mask node Channel_Mask [ 3.128991@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.136062@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.144147@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.154040@3] Register vad [ 3.155205@3] check whether to update sound card init data [ 3.161048@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.168021@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.175335@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.180942@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.188618@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.195942@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.201819@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.208303@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.215343@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.221351@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.228281@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.234067@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.240838@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.248669@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.255604@0] snd_card_add_kcontrols card:ffffffc01ca28018 [ 3.260667@0] effect_v2 is not init [ 3.264086@0] Failed to add VAD controls [ 3.268318@0] GACT probability NOT on [ 3.271621@0] Mirror/redirect action on [ 3.275388@0] u32 classifier [ 3.278216@0] Actions configured [ 3.281768@0] Netfilter messages via NETLINK v0.30. [ 3.286847@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.293031@0] ctnetlink v0.93: registering with nfnetlink. [ 3.298794@2] xt_time: kernel timezone is -0000 [ 3.302739@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.308943@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.313946@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.319519@2] Initializing XFRM netlink socket [ 3.324488@2] NET: Registered protocol family 10 [ 3.329685@2] mip6: Mobile IPv6 [ 3.331584@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.337351@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.344377@2] NET: Registered protocol family 17 [ 3.347714@2] NET: Registered protocol family 15 [ 3.352278@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.365399@2] Bluetooth: RFCOMM TTY layer initialized [ 3.370273@2] Bluetooth: RFCOMM socket layer initialized [ 3.375551@2] Bluetooth: RFCOMM ver 1.11 [ 3.379407@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.384834@2] Bluetooth: BNEP filters: protocol multicast [ 3.390185@2] Bluetooth: BNEP socket layer initialized [ 3.395270@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.401309@2] Bluetooth: HIDP socket layer initialized [ 3.406494@2] l2tp_core: L2TP core driver, V2.0 [ 3.410897@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.415794@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.421521@2] l2tp_netlink: L2TP netlink interface [ 3.426297@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.432307@2] l2tp_debugfs: L2TP debugfs support [ 3.436840@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.443445@2] NET: Registered protocol family 35 [ 3.448215@2] Key type dns_resolver registered [ 3.453373@2] Registered swp emulation handler [ 3.456857@2] Registered cp15_barrier emulation handler [ 3.461949@2] Registered setend emulation handler [ 3.466658@2] disable EAS feature [ 3.470691@0] registered taskstats version 1 [ 3.483581@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.989811@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.989869@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.997999@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.006480@2] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.013447@0] hub 1-0:1.0: USB hub found [ 4.016400@0] hub 1-0:1.0: 1 port detected [ 4.020737@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.025994@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.033821@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.042760@2] hub 2-0:1.0: USB hub found [ 4.045924@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.053170@2] usb usb2: Unsupported the hub [ 4.057695@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:24 UTC (1420070424) [ 4.065720@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.174278@0] dwc_otg: Core Release: 3.10a [ 4.174317@0] dwc_otg: Setting default values for core params [ 4.178482@0] dwc_otg: curmode: 0, host_only: 0 [ 4.195270@0] dwc_otg: Using Buffer DMA mode [ 4.195293@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.199177@0] dwc_otg: Working on port type = SLAVE [ 4.204009@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.211047@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.220626@0] gxbb_pm: enter meson_pm_probe! [ 4.220665@0] no vddio3v3_en pin[ 4.222300@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.227364@0] gxbb_pm: meson_pm_probe done [ 4.23171Y 4.237999@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.243413@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.452968@2] ubi0: attaching mtd6 [ 4.981720@2] ubi0: scanning is finished [ 4.986189@0] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.986473@0] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.993481@0] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.000364@0] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.007434@0] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.013651@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.020977@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.030210@0] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.039674@2] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.045273@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.089971@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.091938@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.101912@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.112687@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.118639@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.293089@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.353985@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.438236@2] ubi1: attaching mtd7 [ 5.764852@2] ubi1: scanning is finished [ 5.768730@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.768847@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.775855@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.782742@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.789809@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.795936@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.803264@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.812496@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.821818@1] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.831151@1] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.854831@3] UBIFS (ubi1:0): recovery needed [ 5.904919@2] UBIFS (ubi1:0): recovery completed [ 5.905087@2] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.911257@2] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.921258@2] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.931950@2] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.938679@2] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f2fbd450 --- 0 [ 6.967094@2] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 6.979725@2] asoc-aml-card auge_sound: tdm prepare capture [ 6.979764@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 6.986908@2] aml_tdm_open [ 6.988023@2] Not init audio effects Opened TCP tuning interface on port 15002: Waitin[ 6.995859@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.001386@0] cpufreq_interactive: no need to active hmp boost! g for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.086336@0] asoc-aml-card auge_sound: tdm prepare capture [ 7.089997@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B The [ 7.096018@0] asoc-aml-card auge_sound: tdm capture enable layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.145341@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.687531@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 22018 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 32 25 0c 3f 18 00 30 28 0f 41 00 00 00 00 00 00 00 00 00 00 00 00 730 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015887 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1975458 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016839@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036444@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045860@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068691@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074992@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087592@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106552@0] Security Framework initialized [ 0.110785@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129135@0] ftrace: allocating 43519 entries in 170 pages [ 0.209453@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210264@0] CPU0: update cpu_capacity 1024 [ 0.214590@0] ASID allocator initialised with 32768 entries [ 0.252574@0] secmon: can't fine clear_range [ 0.253165@0] EFI services will not be available. [ 0.256005@0] Meson chip version = RevC (25:C - 43:0) [ 0.289928@1] Detected VIPT I-cache on CPU1 [ 0.289990@1] CPU1: update cpu_capacity 1024 [ 0.289992@1] CPU1: Booted secondary processor [410fd034] [ 0.317982@2] Detected VIPT I-cache on CPU2 [ 0.318033@2] CPU2: update cpu_capacity 1024 [ 0.318036@2] CPU2: Booted secondary processor [410fd034] [ 0.346046@3] Detected VIPT I-cache on CPU3 [ 0.346096@3] CPU3: update cpu_capacity 1024 [ 0.346098@3] CPU3: Booted secondary processor [410fd034] [ 0.346190@0] Brought up 4 CPUs [ 0.385412@0] SMP: Total of 4 processors activated. [ 0.390321@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396356@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407317@0] CPU: All CPU(s) started at EL2 [ 0.408097@0] alternatives: patching kernel code [ 0.413499@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420636@0] devtmpfs: initialized [ 0.436068@0] DMI not present or invalid. [ 0.436452@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444450@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451006@0] pinctrl core: initialized pinctrl subsystem [ 0.457555@0] NET: Registered protocol family 16 [ 0.476942@0] cpuidle: using governor menu [ 0.477087@0] register canvas platform driver [ 0.479813@0] register rdma platform driver [ 0.485249@0] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.491623@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.499123@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.505200@2] clkmsr: clkmsr: driver init [ 0.508901@2] codec_mm_module_init [ 0.512420@2] media_configs_system_init [ 0.516527@2] aml_watch_point_probe, in, wp:2 [ 0.521156@2] pstore: using zlib compression [ 0.525431@2] console [pstore-1] enabled [ 0.528764@2] pstore: Registered ramoops as persistent store backend [ 0.535168@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.549199@2] aml_iomap: amlogic iomap probe done [ 0.553857@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.555796@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.564797@2] audio_clocks: audio_clocks_probe done [ 0.573411@2] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.573466@2] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.578630@2] amlogic auge_snd_iomap probe done [ 0.861145@0] vgaarb: loaded [ 0.861519@0] SCSI subsystem initialized [ 0.862649@0] usbcore: registered new interface driver usbfs [ 0.868181@0] usbcore: registered new interface driver hub [ 0.873672@0] usbcore: registered new device driver usb [ 0.878920@0] Linux video capture interface: v2.00 [ 0.883694@0] pps_core: LinuxPPS API ver. 1 registered [ 0.888760@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.898148@0] PTP clock support registered [ 0.902633@0] dmi: Firmware registration failed. [ 0.911201@0] secmon: reserve_mem_size:0x300000 [ 0.911462@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.918431@0] secmon: get page:ffffffbf00140000, 5000 [ 0.923152@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.931542@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.938259@0] fb: osd_init_module [ 0.942748@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.948333@0] Bluetooth: Core ver 2.22 [ 0.951448@0] NET: Registered protocol family 31 [ 0.956061@0] Bluetooth: HCI device and connection manager initialized [ 0.962608@0] Bluetooth: HCI socket layer initialized [ 0.967671@0] Bluetooth: L2CAP socket layer initialized [ 0.972992@0] Bluetooth: SCO socket layer initialized [ 0.982050@0] NetLabel: Initializing [ 0.982083@0] NetLabel: domain hash size = 128 [ 0.986137@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.991372@0] NetLabel: unlabeled traffic allowed by default [ 0.998839@3] clocksource: Switched to clocksource arch_sys_counter [ 1.099396@3] VFS: Disk quotas dquot_6.6.0 [ 1.099503@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.118677@3] NET: Registered protocol family 2 [ 1.119435@3] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.124920@3] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.131572@3] TCP: Hash tables configured (established 4096 bind 4096) [ 1.138172@3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.144116@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.150766@3] NET: Registered protocol family 1 [ 1.155573@3] RPC: Registered named UNIX socket transport module. [ 1.161257@3] RPC: Registered udp transport module. [ 1.166130@3] RPC: Registered tcp transport module. [ 1.171029@3] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179186@3] Unpacking initramfs... [ 1.280545@3] Freeing initrd memory: 2308K [ 1.281942@3] hw perfevents: clusterb_enabled = 0 [ 1.283901@3] hw perfevents: cpumasks 0xf, 0x0 [ 1.288261@3] hw perfevents: cluster A irq = 7 [ 1.292775@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.302158@3] audit: initializing netlink subsys (disabled) [ 1.306307@3] audit: type=2000 audit(1.100:1): initialized [ 1.312962@3] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.333864@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.335846@3] NFS: Registering the id_resolver key type [ 1.339551@3] Key type id_resolver registered [ 1.343892@3] Key type id_legacy registered [ 1.348380@3] fuse init (API version 7.26) [ 1.356915@3] NET: Registered protocol family 38 [ 1.356960@3] Key type asymmetric registered [ 1.361124@3] Asymmetric key parser 'x509' registered [ 1.366473@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.373818@3] io scheduler noop registered (default) [ 1.378825@3] io scheduler deadline registered [ 1.383513@3] io scheduler cfq registered [ 1.398122@2] random: fast init done [ 1.398188@2] random: crng init done [ 1.398714@3] Unable to detect cache hierarchy for CPU 0 [ 1.430921@3] loop: module loaded [ 1.435934@3] zram: Added device: zram0 [ 1.436331@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.442089@3] libphy: Fixed MDIO Bus: probed [ 1.445667@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.450335@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.457921@3] PPP generic driver version 2.4.2 [ 1.461479@3] PPP BSD Compression module registered [ 1.466091@3] PPP Deflate Compression module registered [ 1.471336@3] PPP MPPE Compression module registered [ 1.476308@3] NET: Registered protocol family 24 [ 1.481078@3] usbcore: registered new interface driver asix [ 1.486680@3] usbcore: registered new interface driver ax88179_178a [ 1.492928@3] usbcore: registered new interface driver cdc_ether [ 1.498960@3] usbcore: registered new interface driver net1080 [ 1.504828@3] usbcore: registered new interface driver cdc_subset [ 1.510953@3] usbcore: registered new interface driver zaurus [ 1.516747@3] usbcore: registered new interface driver cdc_ncm [ 1.523228@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.529268@3] ehci-pci: EHCI PCI platform driver [ 1.533995@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.540314@3] ohci-pci: OHCI PCI platform driver [ 1.545500@3] usbcore: registered new interface driver cdc_acm [ 1.550793@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.559117@3] usbcore: registered new interface driver usb-storage [ 1.565360@3] usbcore: registered new interface driver usbserial [ 1.571870@3] mousedev: PS/2 mouse device common for all mice [ 1.577400@3] usbcore: registered new interface driver xpad [ 1.582865@3] i2c /dev entries driver [ 1.586436@3] usbcore: registered new interface driver uvcvideo [ 1.592262@3] USB Video Class driver (1.1.1) [ 1.596537@3] md: linear personality registered for level -1 [ 1.602728@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.612360@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.618228@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.625986@1] usbcore: registered new interface driver usbhid [ 1.629910@1] usbhid: USB HID core driver [ 1.634179@0] ashmem: initialized [ 1.637645@1] logger: created 512K log 'log_main' [ 1.642140@0] logger: created 1K log 'log_events' [ 1.646915@1] logger: created 1K log 'log_radio' [ 1.651510@1] logger: created 16K log 'log_system' [ 1.656134@1] exFAT: Version 1.3.0 [ 1.660828@2] ff803000.serial: clock gate not found [ 1.664541@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.671665@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.686642@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.689239@2] console [ttyS0] enabled [ 1.689239@2] console [ttyS0] enabled [ 1.696435@2] bootconsole [aml_uart0] disabled [ 1.696435@2] bootconsole [aml_uart0] disabled [ 1.705923@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.712387@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.722675@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.732470@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.738989@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.751484@3] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.755497@3] irq = 20 [ 1.757822@3] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.766636@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.771150@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.776275@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.782731@3] meson-remote: Driver init [ 1.786695@3] meson-remote: remote_probe [ 1.790303@3] meson-remote ff808040.rc: protocol = 0x1 [ 1.795374@3] meson-remote ff808040.rc: don't find the node [ 1.801923@3] meson-remote ff808040.rc: led_blink = 0 [ 1.806922@3] meson-remote ff808040.rc: don't find the node [ 1.813824@3] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.819464@3] meson-remote ff808040.rc: platform_data irq =19 [ 1.825166@3] meson-remote ff808040.rc: custom_number = 3 [ 1.830481@3] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.836167@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.843319@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.849619@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.855767@3] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.861433@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.868590@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.874886@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.881035@3] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.886703@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.893861@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.900157@3] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.906285@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.913008@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.918785@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.924565@3] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.930257@3] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.935950@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.941901@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.947766@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.953372@3] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.958720@3] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.964067@3] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.970151@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.977051@2] meson-remote: IR XMP protocol handler initialized [ 1.982737@2] efusekeynum: 4 [ 1.985247@2] efusekeyname: mac offset: 0 size: 6 [ 1.991593@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.997973@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.004361@2] efusekeyname: usid offset: 18 size: 16 [ 2.011048@3] efuse efuse: probe OK! [ 2.017024@0] ge2d: ge2d_init_module [ 2.018327@0] [tsync_pcr_init]init success. [ 2.022964@0] vout: error: invalid vinfo1. current vmode is not supported [ 2.029303@0] DI: di_module_init ok. [ 2.032464@0] dim:dim_module_init [ 2.035712@0] dim:dim_module_init finish [ 2.039411@0] dil:dil_init. [ 2.042315@0] dil:dil_init ok. [ 2.045211@0] vdin_drv_init: major 241 [ 2.049123@0] vdin_drv_init: vdin driver init done [ 2.053610@0] [viuin..]viuin_init_module viuin module init [ 2.059434@0] [viuin..]viuin_probe probe ok. [ 2.063528@0] amlvid:info: amlvideo_init called[ 2.067581@0] amlvid:info: amlvideo_create_instance called [ 2.073003@0] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.078367@3] amlvideo-000: V4L2 device registered as video10 [ 2.083805@3] amlvid:info: amlvideo_create_instance called [ 2.089218@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.094548@1] amlvideo-001: V4L2 device registered as video23 [ 2.100311@1] PPMGRDRV: warn: ppmgr module init func called [ 2.106446@1] videosync_create_instance dev_s ffffffc01c8be400,dev_s->dev ffffffc01dbc1b00 [ 2.113747@1] videosync_create_instance reg videosync.0 [ 2.119168@1] aml_vecm_init:module init [ 2.119169@3] videosync_thread started [ 2.126750@1] amdolby_vision_init:module init [ 2.131013@1] prime_sl module init [ 2.134601@1] amlogic mtd driver init [ 2.138321@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.143569@1] bl mode descrete [ 2.146478@1] fip_copies 4 [ 2.149162@1] fip_size 0x200000 [ 2.152269@1] nand_clk_ctrl 0xffe07000 [ 2.155972@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.161606@1] nand_clk_ctrl 0xffe07000 [ 2.165302@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.173627@1] plat->aml_nand_device ffffff800a778cf8 [ 2.178163@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.184154@1] NAND device id: c2 dc 90 a2 57 3 [ 2.188325@1] NAND device: Manufacturer ID: [ 2.192373@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.199032@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.204533@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.210053@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.216354@1] mtd->oobavail: 0x10 [ 2.219973@3] aml_nand_init 2119: plat-name:bootloader [ 2.224737@3] Creating 1 MTD partitions on "bootloader": [ 2.229981@3] 0x000000000000-0x000000400000 : "bootloader" [ 2.237923@0] bootloader initialized ok [ 2.239230@0] plat->aml_nand_device ffffff800a778cf8 [ 2.244134@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.250166@0] NAND device id: c2 dc 90 a2 57 3 [ 2.254305@0] NAND device: Manufacturer ID: [ 2.258354@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.265020@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.270513@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.276040@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.282338@0] mtd->oobavail: 0x10 [ 2.285812@0] aml_nand_init 2119: plat-name:nandnormal [ 2.290736@0] bbt_start=20 [ 2.293370@0] env_start=24 [ 2.296042@0] key_start=32 [ 2.298708@0] dtb_start=40 [ 2.301389@0] ddr_start=44 [ 2.304079@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.310544@0] get_free_node 43: bitmap=0 [ 2.313984@0] get_free_node 55: bitmap=1 [ 2.318068@0] get_free_node 43: bitmap=1 [ 2.321745@0] get_free_node 55: bitmap=3 [ 2.325830@0] get_free_node 43: bitmap=3 [ 2.329508@0] get_free_node 55: bitmap=7 [ 2.333389@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.340029@0] nbbt free list: [ 2.342962@0] blockN=21, ec=-1, dirty_flag=0 [ 2.347188@0] blockN=22, ec=-1, dirty_flag=0 [ 2.351415@0] blockN=23, ec=-1, dirty_flag=0 [ 2.355641@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.361050@0] nbbt valid addr: 500000 [ 2.364268@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.369873@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.376116@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.382524@0] get_free_node 43: bitmap=7 [ 2.386002@0] get_free_node 55: bitmap=f [ 2.390085@0] get_free_node 43: bitmap=f [ 2.393764@0] get_free_node 55: bitmap=1f [ 2.397935@0] get_free_node 43: bitmap=1f [ 2.401699@0] get_free_node 55: bitmap=3f [ 2.405869@0] get_free_node 43: bitmap=3f [ 2.409634@0] get_free_node 55: bitmap=7f [ 2.413804@0] get_free_node 43: bitmap=7f [ 2.417569@0] get_free_node 55: bitmap=ff [ 2.421739@0] get_free_node 43: bitmap=ff [ 2.425504@0] get_free_node 55: bitmap=1ff [ 2.429760@0] get_free_node 43: bitmap=1ff [ 2.433618@0] get_free_node 55: bitmap=3ff [ 2.437664@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.444306@0] nenv free list: [ 2.447238@0] blockN=25, ec=-1, dirty_flag=0 [ 2.451465@0] blockN=26, ec=-1, dirty_flag=0 [ 2.455690@0] blockN=27, ec=-1, dirty_flag=0 [ 2.459917@0] blockN=28, ec=-1, dirty_flag=0 [ 2.464143@0] blockN=29, ec=-1, dirty_flag=0 [ 2.468369@0] blockN=30, ec=-1, dirty_flag=0 [ 2.472596@0] blockN=31, ec=-1, dirty_flag=0 [ 2.476822@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.488557@0] nenv valid addr: 610000 [ 2.488577@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.493008@0] get_free_node 43: bitmap=3ff [ 2.496859@0] get_free_node 55: bitmap=7ff [ 2.501137@0] get_free_node 43: bitmap=7ff [ 2.504966@0] get_free_node 55: bitmap=fff [ 2.509223@0] get_free_node 43: bitmap=fff [ 2.513074@0] get_free_node 55: bitmap=1fff [ 2.517416@0] get_free_node 43: bitmap=1fff [ 2.521354@0] get_free_node 55: bitmap=3fff [ 2.525696@0] get_free_node 43: bitmap=3fff [ 2.529634@0] get_free_node 55: bitmap=7fff [ 2.533977@0] get_free_node 43: bitmap=7fff [ 2.537914@0] get_free_node 55: bitmap=ffff [ 2.542256@0] get_free_node 43: bitmap=ffff [ 2.546194@0] get_free_node 55: bitmap=1ffff [ 2.550622@0] get_free_node 43: bitmap=1ffff [ 2.554646@0] get_free_node 55: bitmap=3ffff [ 2.558873@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.565513@0] nkey free list: [ 2.568445@0] blockN=32, ec=-1, dirty_flag=0 [ 2.572672@0] blockN=33, ec=-1, dirty_flag=0 [ 2.576898@0] blockN=34, ec=-1, dirty_flag=0 [ 2.581124@0] blockN=35, ec=-1, dirty_flag=0 [ 2.585350@0] blockN=36, ec=-1, dirty_flag=0 [ 2.589576@0] blockN=37, ec=-1, dirty_flag=0 [ 2.593803@0] blockN=38, ec=-1, dirty_flag=0 [ 2.598029@0] blockN=39, ec=-1, dirty_flag=0 [ 2.602255@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.607344@0] nkey valid addr: fffffffffffc0000 [ 2.611829@0] aml_nand_key_check 1251 NO key exist [ 2.616574@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.623199@0] get_free_node 43: bitmap=3ffff [ 2.627010@0] get_free_node 55: bitmap=7ffff [ 2.631439@0] get_free_node 43: bitmap=7ffff [ 2.635463@0] get_free_node 55: bitmap=fffff [ 2.639892@0] get_free_node 43: bitmap=fffff [ 2.643915@0] get_free_node 55: bitmap=1fffff [ 2.648227@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.654867@0] ndtb free list: [ 2.657792@0] blockN=41, ec=-1, dirty_flag=0 [ 2.662026@0] blockN=42, ec=-1, dirty_flag=0 [ 2.666253@0] blockN=43, ec=-1, dirty_flag=0 [ 2.670480@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.688472@0] ndtb valid addr: a00000 [ 2.688492@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.692927@0] get_free_node 43: bitmap=1fffff [ 2.697036@0] get_free_node 55: bitmap=3fffff [ 2.701551@0] get_free_node 43: bitmap=3fffff [ 2.705661@0] get_free_node 55: bitmap=7fffff [ 2.709974@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.716614@0] nddr free list: [ 2.719546@0] blockN=44, ec=-1, dirty_flag=0 [ 2.723773@0] blockN=45, ec=-1, dirty_flag=0 [ 2.727999@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.733088@0] nddr valid addr: fffffffffffc0000 [ 2.737573@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.742324@0] tpl: off 16777216, size 8388608 [ 2.808447@0] Creating 7 MTD partitions on "nandnormal": [ 2.808477@0] 0x000001000000-0x000001800000 : "tpl" [ 2.815948@1] 0x000001800000-0x000001a00000 : "misc" [ 2.819357@2] 0x000001a00000-0x000001c00000 : "logo" [ 2.824247@1] 0x000001c00000-0x000002c00000 : "recovery" [ 2.831333@2] 0x000002c00000-0x000003b00000 : "boot" [ 2.836033@2] 0x000003b00000-0x000015300000 : "system" [ 2.875638@2] 0x000015300000-0x000020000000 : "data" [ 2.899552@2] nandnormal initialized ok [ 2.899637@2] aml_ubootenv_init: register env chardev [ 2.903012@2] aml_ubootenv_init: register env chardev OK [ 2.908225@2] amlnf_dtb_init: register dtb cdev [ 2.912943@2] amlnf_dtb_init: register dtd cdev OK [ 2.917300@2] mtd_nand_probe 267 , err = 0 [ 2.922189@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.927636@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.934616@2] unifykey: storage in base: 0xffffffc005000000 [ 2.939373@2] unifykey: storage out base: 0xffffffc005040000 [ 2.944961@2] unifykey: storage block base: 0xffffffc005080000 [ 2.950731@2] unifykey: probe done! [ 2.954627@2] unifykey: no efuse-version set, use default value: -1 [ 2.960407@2] unifykey: key unify config unifykey-num is 6 [ 2.965871@2] unifykey: key unify fact unifykey-num is 6 [ 2.971090@2] unifykey: unifykey_devno: ee00000 [ 2.975839@2] unifykey: device unifykeys created ok [ 2.980498@2] unifykey: aml_unifykeys_init done! [ 2.985271@2] audio_dsp: [dsp]register dsp to char divece(257) [ 2.991613@2] amlkaraoke init success! [ 2.994709@2] sysled: module init [ 2.998216@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.003117@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.010223@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.016759@2] amlogic rfkill init [ 3.021437@2] dmc_monitor_probe [ 3.023183@2] page_trace_module_init, create sysfs failed [ 3.032829@2] defendkey defendkey: Reserved memory is not enough! [ 3.034318@2] defendkey: probe of defendkey failed with error -22 [ 3.041339@2] usbcore: registered new interface driver snd-usb-audio [ 3.050581@2] asoc debug: aml_audio_controller_probe-130 [ 3.052467@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.057741@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.065531@2] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.072702@2] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.079083@2] aml_tdm_platform_probe(), share en = 1[ 3.083818@2] No channel mask node Channel_Mask [ 3.088589@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.094123@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.102101@2] aml_tdm_platform_probe(), share en = 1[ 3.106592@2] No channel mask node Channel_Mask [ 3.111340@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.116939@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.124837@2] aml_tdm_platform_probe(), share en = 1[ 3.129360@2] No channel mask node Channel_Mask [ 3.134967@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.141992@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.150100@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.160087@2] Register vad [ 3.161137@2] check whether to update sound card init data [ 3.167006@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.173972@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.181280@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.186894@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.194564@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.201895@2] aml_dai_tdm_probe, failed add snd tdm controls [ 3.207764@2] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.214255@2] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.221307@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.227299@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.234186@2] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.240010@2] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.246747@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.254163@2] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.261625@0] snd_card_add_kcontrols card:ffffffc01ca11018 [ 3.266612@0] effect_v2 is not init [ 3.270041@0] Failed to add VAD controls [ 3.274291@0] GACT probability NOT on [ 3.277569@0] Mirror/redirect action on [ 3.281336@0] u32 classifier [ 3.284174@0] Actions configured [ 3.287714@0] Netfilter messages via NETLINK v0.30. [ 3.292788@0] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.299015@0] ctnetlink v0.93: registering with nfnetlink. [ 3.304697@2] xt_time: kernel timezone is -0000 [ 3.308698@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.314924@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.319909@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.325467@2] Initializing XFRM netlink socket [ 3.330444@2] NET: Registered protocol family 10 [ 3.335662@2] mip6: Mobile IPv6 [ 3.337500@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.343341@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.350348@2] NET: Registered protocol family 17 [ 3.353662@2] NET: Registered protocol family 15 [ 3.358231@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.371332@2] Bluetooth: RFCOMM TTY layer initialized [ 3.376224@2] Bluetooth: RFCOMM socket layer initialized [ 3.381500@2] Bluetooth: RFCOMM ver 1.11 [ 3.385361@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.390779@2] Bluetooth: BNEP filters: protocol multicast [ 3.396138@2] Bluetooth: BNEP socket layer initialized [ 3.401216@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.407266@2] Bluetooth: HIDP socket layer initialized [ 3.412423@2] l2tp_core: L2TP core driver, V2.0 [ 3.416844@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.421744@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.427470@2] l2tp_netlink: L2TP netlink interface [ 3.432247@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.438271@2] l2tp_debugfs: L2TP debugfs support [ 3.442790@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.449394@2] NET: Registered protocol family 35 [ 3.454151@2] Key type dns_resolver registered [ 3.459340@2] Registered swp emulation handler [ 3.462720@2] Registered cp15_barrier emulation handler [ 3.467903@2] Registered setend emulation handler [ 3.472618@2] disable EAS feature [ 3.476784@2] registered taskstats version 1 [ 3.489473@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.995703@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.995779@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.003900@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.012429@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.019361@1] hub 1-0:1.0: USB hub found [ 4.022258@1] hub 1-0:1.0: 1 port detected [ 4.026641@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.031899@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.039713@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.048661@0] hub 2-0:1.0: USB hub found [ 4.051781@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.059074@0] usb usb2: Unsupported the hub [ 4.063527@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:06 UTC (1420070406) [ 4.071607@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.180427@0] dwc_otg: Core Release: 3.10a [ 4.180465@0] dwc_otg: Setting default values for core params [ 4.184629@0] dwc_otg: curmode: 0, host_only: 0 [ 4.201420@0] dwc_otg: Using Buffer DMA mode [ 4.201443@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.205324@0] dwc_otg: Working on port type = SLAVE [ 4.210157@0] dwc_otg: Dedicated Tx FIFOs mode [ 4.217214@0] cpucore_cooling_register, max_cpu_core_num:4 [ 4.226768@0] gxbb_pm: enter meson_pm_probe! [ 4.226807@0] no vddio3v3_en pin[ 4.228488@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.233489@0] gxbb_pm: meson_pm_probe done [ 4.23787X 4.244144@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.249551@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.459574@2] ubi0: attaching mtd6 [ 4.987414@2] ubi0: scanning is finished [ 4.991634@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.991922@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 4.998928@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.005856@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.012886@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.019099@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.026426@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.035659@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.045068@3] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.050794@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.095584@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.097510@2] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.107541@2] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.118301@2] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.124253@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.312436@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.370313@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.456650@3] ubi1: attaching mtd7 [ 5.782890@3] ubi1: scanning is finished [ 5.786732@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.786916@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.793882@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.800779@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.807858@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.813974@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.821310@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.830534@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.839869@3] ubi1: background thread "ubi_bgt1d" started, PID 2034 UBI device number 1, total 692 L[ 5.849161@2] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2038 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.872802@1] UBIFS (ubi1:0): recovery needed [ 5.923530@3] UBIFS (ubi1:0): recovery completed [ 5.923688@3] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.929871@3] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.939868@3] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.950560@3] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.957289@3] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2126, tid:f3017450 --- 0 OK skip network Init because /sys/class/net/eth0 is not exist [ 6.984653@1] aml_tdm_open [ 6.994575@1] asoc-aml-card auge_sound: tdm prepare capture [ 6.994614@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.001629@1] aml_tdm_open [ 7.002802@1] Not init audio effects Opened TCP tuning in[ 7.008577@0] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.015165@0] cpufreq_interactive: no need to active hmp boost! terface on port 15002: Waiting for AWE Server Connection from PC... # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.100081@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.103779@0] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.109676@0] asoc-aml-card auge_sound: tdm capture enable The layout /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.162953@0] asoc-aml-card auge_sound: tdm playback enable axg_s420_v03 OK [ 8.663073@0] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones reboot Failed to open gpio value for reading! bypass gpio changed = -1 The system is going down NOW! Sent SIGTERM to all processes [ 13.290535@0] asoc-aml-card auge_sound: tdm playback stop [ 13.290899@1] asoc-aml-card auge_sound: tdm capture stop [ 13.295896@1] aml_dai_tdm_hw_free(), disable mclk for TDM-B Sent SIGKILL to all processes Requesting system reboot [ 15.281496@0] mtd_nand_reboot_notifier 35 [ 15.281758@0] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1) [ 15.289866@0] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.293448@0] usb usb2: USB disconnect, device number 1 [ 15.303311@3] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 15.304130@3] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 15.309538@3] usb usb1: USB disconnect, device number 1 [ 15.321102@2] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.324770@1] ------------[ cut here ]------------ [ 15.326258@1] WARNING: CPU: 1 PID: 1658 at drivers/cpufreq/arm_big_little.c:174 bL_cpufreq_set_target+0xa0/0x108 [ 15.336251@1] Modules linked in: [ 15.339436@1] [ 15.341111@1] CPU: 1 PID: 1658 Comm: cfinteractive Not tainted 4.9.113 #1 [ 15.347808@1] Hardware name: Amlogic (DT) [ 15.351784@1] task: ffffffc01d920d80 task.stack: ffffff8020104000 [ 15.357840@1] PC is at bL_cpufreq_set_target+0xa0/0x108 [ 15.363012@1] LR is at bL_cpufreq_set_target+0xe0/0x108 [ 15.368175@1] pc : [] lr : [] pstate: 20000145 [ 15.375668@1] sp : ffffff8020107ce0 [ 15.379120@1] x29: ffffff8020107ce0 x28: ffffff800a62a434 [ 15.384551@1] x27: ffffff800a62a000 x26: ffffff8020107d70 [ 15.389983@1] x25: 0000000000000000 x24: 0000000000000000 [ 15.395418@1] x23: ffffff800a8da338 x22: ffffff800a8da2e8 [ 15.400851@1] x21: 00000000fffffffb x20: ffffff800a8da000 [ 15.406285@1] x19: 000000000ee6b280 x18: ffffffc01f77f950 [ 15.411720@1] x17: ffffff8009099490 x16: 0000000000000000 [ 15.417152@1] x15: 0000000000000000 x14: ffffffc01e721b00 [ 15.422587@1] x13: 000000401555c000 x12: 0000000034d5d91d [ 15.428019@1] x11: 0000000000000038 x10: 0101010101010101 [ 15.433454@1] x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f [ 15.438887@1] x7 : ff726b6b64622c77 x6 : 0000000000000080 [ 15.444320@1] x5 : 0000000000000000 x4 : ffffffbefe854e0c [ 15.449754@1] x3 : 0000000000000001 x2 : ffffff800a8cd5c8 [ 15.455189@1] x1 : 00000000fffffffb x0 : 0000000000000000 [ 15.460685@1] [ 15.460685@1] X14: 0xffffffc01e721a80: [ 15.465967@1] 1a80 00000000 00000000 b0000000 00000000 00000000 00000000 00000000 00000000 [ 15.474244@1] 1aa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.482524@1] 1ac0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.490805@1] 1ae0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.499084@1] 1b00 00000000 00000000 ffffffff ffffffff 00000002 00000000 00000000 00000000 [ 15.507364@1] 1b20 2002c000 ffffff80 00000002 00200040 00000000 00000000 00000000 00000000 [ 15.515644@1] 1b40 00000000 00000001 00000006 00000000 fffee74c 00000000 1e65d100 ffffffc0 [ 15.523924@1] 1b60 00000001 00000001 00000078 00000078 00000078 00000000 09d59378 ffffff80 [ 15.532230@1] [ 15.532230@1] X18: 0xffffffc01f77f8d0: [ 15.537553@1] f8d0 0a8da2e8 ffffff80 0a8da338 ffffff80 00000000 00000000 00000000 00000000 [ 15.545831@1] f8f0 20107d70 ffffff80 0a62a000 ffffff80 0a62a434 ffffff80 20107ce0 ffffff80 [ 15.554111@1] f910 09751f28 ffffff80 1f77f950 ffffffc0 09751ee8 ffffff80 20000145 00000000 [ 15.562391@1] f930 00000000 00000000 00000000 00000000 ffffffff ffffffff 00000000 00000000 [ 15.570671@1] f950 00000000 00000000 00000000 00000000 00000003 00000000 00000001 00000000 [ 15.578951@1] f970 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000006 [ 15.587231@1] f990 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.595510@1] f9b0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.603835@1] [ 15.605440@1] ---[ end trace 6ac76867beda7168 ]--- [ 15.610184@1] Call trace: [ 15.612792@1] Exception stack(0xffffff8020107af0 to 0xffffff8020107c20) [ 15.619347@1] 7ae0: 000000000ee6b280 0000007fffffffff [ 15.627289@1] 7b00: ffffffc01f77f950 ffffff8009751ee8 0000000020000145 000000000000003d [ 15.635224@1] 7b20: 0000000000000000 0000000314096c74 ffffff8020107ba0 ffffff8009805860 [ 15.643158@1] 7b40: ffffffc01d8a8d28 000000000ee6b280 000000000ee6b280 ffffff8020107d70 [ 15.651090@1] 7b60: 0000000000000000 ffffffc01d96a810 0000000000000000 0000000000000000 [ 15.659025@1] 7b80: 0000000000000000 ffffff80098054c8 0000000000000000 0000000000000000 [ 15.666963@1] 7ba0: ffffff8020107c20 ffffff8009807168 0000000000000000 00000000fffffffb [ 15.674897@1] 7bc0: ffffff800a8cd5c8 0000000000000001 ffffffbefe854e0c 0000000000000000 [ 15.682835@1] 7be0: 0000000000000080 ff726b6b64622c77 7f7f7f7f7f7f7f7f fffffffffffffffc [ 15.690767@1] 7c00: 0101010101010101 0000000000000038 0000000034d5d91d 000000401555c000 [ 15.698723@1] [ffffff8020107ce0+ 64][] bL_cpufreq_set_target+0xa0/0x108 [ 15.706923@1] [ffffff8020107d20+ 96][] __cpufreq_driver_target+0x260/0x548 [ 15.715368@1] [ffffff8020107d80+ 160][] cpufreq_interactive_speedchange_task+0x2d8/0x358 [ 15.724941@1] [ffffff8020107e20+ 0][] kthread+0xe4/0xf8 [ 15.731831@1] [0000000000000000+ 0][] ret_from_fork+0x10/0x20 [ 15.739516@1] arm_big_little: clk_set_rate failed: -5, new cluster: 0 [ 15.745802@1] cpufreq: __target_index: Failed to change cpu frequency: -5 [ 15.752757@0] reboot: Restarting system [ 15.756305@0] reboot reason 1 bl31 reboot reason: 0xd bl31 reboot reason: 0x1 l30:thermal: wait finish sample timeout! system cmd 1. AXG:BL1:d1dbf2:a4926f;FEAT:E0DC318C:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;CHK:0; sdio debug board detected TE: 21790 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 19 00 33 25 0b 3f 17 00 2f 28 0f 42 00 00 00 00 00 00 00 00 00 00 00 00 740 - PASS Rank0: 512MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b3200, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG normal boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 6d f5 81 96 d4 39 f8 04 0f 74 a2 a1 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015875 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Aug 03 2021 - 14:53:18) DRAM: 512 MiB Relocation Offset is: 1eeb5000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000001ff6e3c0 aml_i2c_init_port init regs for 0 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000000000000-0x000000400000 : "bootloader" Slc NAND 4Gib MX30LF4G28AD initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: c2 dc 90 a2 57 3 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD ) get_sys_clk_rate_mtd() 292, clock setting 250! m3_nand_adjust_timing() sys_clk_rate 250, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =256, bch_bytes =54 ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 PLANE change! plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=16,oob_size=256 oob avail size 16 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 500000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 500000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 nenv free list: blockN=25, ec=-1, dirty_flag=0 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nenv valid addr: 610000 nkey: info size=0x40000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nkey free list: blockN=32, ec=-1, dirty_flag=0 blockN=33, ec=-1, dirty_flag=0 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 nkey valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nkey exist ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 ndtb free list: blockN=41, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: a00000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffc0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 16777216, size 8388608 Creating 7 MTD partitions on "Slc NAND 4Gib MX30LF4G28AD ": 0x000001000000-0x000001800000 : "tpl" 0x000001800000-0x000001a00000 : "misc" 0x000001a00000-0x000001c00000 : "logo" 0x000001c00000-0x000002c00000 : "recovery" 0x000002c00000-0x000003b00000 : "boot" 0x000003b00000-0x000015300000 : "system" 0x000015300000-0x000020000000 : "data" Slc NAND 4Gib MX30LF4G28AD initialized ok MMC: aml_priv->desc_buf = 0x000000001ecb50e0 aml_priv->desc_buf = 0x000000001ecb7420 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 610000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=normal [store]To run cmd[amlnf dtb_read 0x1000000 0x40000] sub cmd dtb new argv[1] dtb_read do_dtb_ops(): argc 4 arg 0: amlnf arg 1: dtb_read arg 2: 0x1000000 arg 3: 0x40000 do_dtb_ops() read amlnf_dtb_read: #### aml_nand_read_rsv_info:446,read ndtb info to a00000 do_dtb_ops(): 262144 bytes read : OK Amlogic multi-DTB tool GZIP format, decompress... Multi DTB detected. Multi DTB tool version: v2. Support 3 DTBS. debug ddr size: 0x20000000 checkhw board adc:3 dts ,it's up to board id Found DTB for "axg_s420_v03" Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### aml_nand_ext_read_rsv_info 520: nkey is invalid! read exit![EFUSE_MSG]keynum is 4 MACADDR:02:d4:96:81:f5:6d(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 0 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 0 info->slot_info[1].online = 0 info->attemp_times = 0 attemp_times = 0 active slot = 0 wipe_data=successful wipe_cache=successful recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0 CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [burnup]Rd:Up sz 0x9d4ae3 to align 0x1000 avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =1ecdff50 copy done Kernel command line: root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x027f1a00 Loading Ramdisk to 1ea61000, end 1eca29d2 ... OK Loading Device Tree to 000000001ea54000, end 000000001ea60b8b ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 1974599 us [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113-g3f253814-dirty (charmk@charmk-MINIPC-PN50) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Sep 16 11:00:54 KST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] cma: Reserved 8 MiB at 0x000000001f800000 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 26 pages/cpu @ffffffc01f757000 s68632 r8192 d29672 u106496 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs root=/dev/ubi0_0 rootfstype=ubifs init=/sbin/init [ 0.000000@0] fb: [ 0.000000@0] fb: loaded [ 0.000000@0] fb: androidboot.selinux=enforcing [ 0.000000@0] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 473480K/524288K available (13116K kernel code, 1862K rwdata, 3908K rodata, 5056K init, 1461K bss, 38520K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d50000 ( 13120 KB) [ 0.000000@0] .rodata : 0xffffff8009d50000 - 0xffffff800a130000 ( 3968 KB) [ 0.000000@0] .init : 0xffffff800a130000 - 0xffffff800a620000 ( 5056 KB) [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7f1a00 ( 1863 KB) [ 0.000000@0] .bss : 0xffffff800a7f1a00 - 0xffffff800a95f09c ( 1462 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok![ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008256@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016839@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036443@0] thread_stack_cache_init, vmap:ffffffc01e5af600, bitmap:ffffffc01e5a3000, cache page:1e600 [ 0.045861@0] thread_stack_cache_init, allocation vm area:ffffffc01e5e14c0, addr:ffffff8020000000, size:20001000 [ 0.056093@0] cpu 0, vmap_stack:[ffffffc01f761960-ffffffc01f765950] [ 0.062392@0] cpu 0, irq_stack: [ffffffc01f757060-ffffffc01f75b050] [ 0.068692@0] cpu 1, vmap_stack:[ffffffc01f77b960-ffffffc01f77f950] [ 0.074991@0] cpu 1, irq_stack: [ffffffc01f771060-ffffffc01f775050] [ 0.081291@0] cpu 2, vmap_stack:[ffffffc01f795960-ffffffc01f799950] [ 0.087591@0] cpu 2, irq_stack: [ffffffc01f78b060-ffffffc01f78f050] [ 0.093891@0] cpu 3, vmap_stack:[ffffffc01f7af960-ffffffc01f7b3950] [ 0.100191@0] cpu 3, irq_stack: [ffffffc01f7a5060-ffffffc01f7a9050] [ 0.106551@0] Security Framework initialized [ 0.110784@0] SELinux: Initializing. [ 0.114513@0] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.121284@0] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.129133@0] ftrace: allocating 43519 entries in 170 pages [ 0.209535@0] sched-energy: CPU device node has no sched-energy-costs [ 0.210343@0] CPU0: update cpu_capacity 1024 [ 0.214668@0] ASID allocator initialised with 32768 entries [ 0.252651@0] secmon: can't fine clear_range [ 0.253233@0] EFI services will not be available. [ 0.256083@0] Meson chip version = RevC (25:C - 43:0) [ 0.290016@1] Detected VIPT I-cache on CPU1 [ 0.290077@1] CPU1: update cpu_capacity 1024 [ 0.290079@1] CPU1: Booted secondary processor [410fd034] [ 0.318063@2] Detected VIPT I-cache on CPU2 [ 0.318116@2] CPU2: update cpu_capacity 1024 [ 0.318119@2] CPU2: Booted secondary processor [410fd034] [ 0.346131@3] Detected VIPT I-cache on CPU3 [ 0.346180@3] CPU3: update cpu_capacity 1024 [ 0.346183@3] CPU3: Booted secondary processor [410fd034] [ 0.346271@0] Brought up 4 CPUs [ 0.385490@0] SMP: Total of 4 processors activated. [ 0.390399@0] CPU features: detected feature: 32-bit EL0 Support [ 0.396436@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.407395@0] CPU: All CPU(s) started at EL2 [ 0.408176@0] alternatives: patching kernel code [ 0.413581@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.420710@0] devtmpfs: initialized [ 0.436165@0] DMI not present or invalid. [ 0.436552@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.444545@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.451104@0] pinctrl core: initialized pinctrl subsystem [ 0.457650@0] NET: Registered protocol family 16 [ 0.493050@3] cpuidle: using governor menu [ 0.493202@3] register canvas platform driver [ 0.495917@3] register rdma platform driver [ 0.501376@3] vdso: 2 pages (1 code @ ffffff8009d57000, 1 data @ ffffff800a625000) [ 0.507754@3] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.515204@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.521330@3] clkmsr: clkmsr: driver init [ 0.525041@3] codec_mm_module_init [ 0.528484@3] media_configs_system_init [ 0.532614@3] aml_watch_point_probe, in, wp:2 [ 0.538145@3] pstore: using zlib compression [ 0.541535@3] console [pstore-1] enabled [ 0.544873@3] pstore: Registered ramoops as persistent store backend [ 0.551280@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0 domain-0 init dvfs: 4 [ 0.565318@3] aml_iomap: amlogic iomap probe done [ 0.569974@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.571914@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.580885@3] audio_clocks: audio_clocks_probe done [ 0.589424@3] aml_snd_reg_map[0], reg:ff632000, size:2000 [ 0.589481@3] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.594639@3] amlogic auge_snd_iomap probe done [ 0.869253@3] vgaarb: loaded [ 0.869636@3] SCSI subsystem initialized [ 0.870707@3] usbcore: registered new interface driver usbfs [ 0.876271@3] usbcore: registered new interface driver hub [ 0.881771@3] usbcore: registered new device driver usb [ 0.887060@3] Linux video capture interface: v2.00 [ 0.891818@3] pps_core: LinuxPPS API ver. 1 registered [ 0.896866@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.906256@3] PTP clock support registered [ 0.914609@3] dmi: Firmware registration failed. [ 0.922646@3] secmon: reserve_mem_size:0x300000 [ 0.922747@3] secmon secmon: assigned reserved memory node linux,secmon [ 0.928537@3] secmon: get page:ffffffbf00140000, 5000 [ 0.933278@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.941675@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.948402@3] fb: osd_init_module [ 0.952914@3] Advanced Linux Sound Architecture Driver Initialized. [ 0.958453@3] Bluetooth: Core ver 2.22 [ 0.961594@3] NET: Registered protocol family 31 [ 0.966193@3] Bluetooth: HCI device and connection manager initialized [ 0.972745@3] Bluetooth: HCI socket layer initialized [ 0.977827@3] Bluetooth: L2CAP socket layer initialized [ 0.983107@3] Bluetooth: SCO socket layer initialized [ 0.992183@3] NetLabel: Initializing [ 0.992216@3] NetLabel: domain hash size = 128 [ 0.996282@3] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.001499@3] NetLabel: unlabeled traffic allowed by default [ 1.008905@1] clocksource: Switched to clocksource arch_sys_counter [ 1.109465@1] VFS: Disk quotas dquot_6.6.0 [ 1.109572@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.128692@0] NET: Registered protocol family 2 [ 1.129443@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.134936@0] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.141582@0] TCP: Hash tables configured (established 4096 bind 4096) [ 1.148187@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.154123@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.160784@0] NET: Registered protocol family 1 [ 1.165602@0] RPC: Registered named UNIX socket transport module. [ 1.171270@0] RPC: Registered udp transport module. [ 1.176149@0] RPC: Registered tcp transport module. [ 1.181053@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.189157@0] Unpacking initramfs... [ 1.290534@0] Freeing initrd memory: 2308K [ 1.291929@0] hw perfevents: clusterb_enabled = 0 [ 1.293779@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.298216@0] hw perfevents: cluster A irq = 7 [ 1.302781@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.312149@0] audit: initializing netlink subsys (disabled) [ 1.316292@0] audit: type=2000 audit(1.160:1): initialized [ 1.322912@0] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.343849@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.349873@0] NFS: Registering the id_resolver key type [ 1.349936@0] Key type id_resolver registered [ 1.353876@0] Key type id_legacy registered [ 1.358354@0] fuse init (API version 7.26) [ 1.366993@0] NET: Registered protocol family 38 [ 1.367038@0] Key type asymmetric registered [ 1.371113@0] Asymmetric key parser 'x509' registered [ 1.376466@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.383830@0] io scheduler noop registered (default) [ 1.388777@0] io scheduler deadline registered [ 1.393487@0] io scheduler cfq registered [ 1.408024@2] random: fast init done [ 1.408091@2] random: crng init done [ 1.408599@0] Unable to detect cache hierarchy for CPU 0 [ 1.436823@0] loop: module loaded [ 1.437805@0] zram: Added device: zram0 [ 1.438718@0] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.446177@0] libphy: Fixed MDIO Bus: probed [ 1.449803@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.454557@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.462121@0] PPP generic driver version 2.4.2 [ 1.465701@0] PPP BSD Compression module registered [ 1.470303@0] PPP Deflate Compression module registered [ 1.475552@0] PPP MPPE Compression module registered [ 1.480524@0] NET: Registered protocol family 24 [ 1.485305@0] usbcore: registered new interface driver asix [ 1.490888@0] usbcore: registered new interface driver ax88179_178a [ 1.497152@0] usbcore: registered new interface driver cdc_ether [ 1.503194@0] usbcore: registered new interface driver net1080 [ 1.509045@0] usbcore: registered new interface driver cdc_subset [ 1.515167@0] usbcore: registered new interface driver zaurus [ 1.520961@0] usbcore: registered new interface driver cdc_ncm [ 1.527406@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.533485@0] ehci-pci: EHCI PCI platform driver [ 1.538208@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.544528@0] ohci-pci: OHCI PCI platform driver [ 1.549723@0] usbcore: registered new interface driver cdc_acm [ 1.555013@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.563318@0] usbcore: registered new interface driver usb-storage [ 1.569579@0] usbcore: registered new interface driver usbserial [ 1.576064@0] mousedev: PS/2 mouse device common for all mice [ 1.581625@0] usbcore: registered new interface driver xpad [ 1.587071@0] i2c /dev entries driver [ 1.590697@0] usbcore: registered new interface driver uvcvideo [ 1.596470@0] USB Video Class driver (1.1.1) [ 1.600747@0] md: linear personality registered for level -1 [ 1.606979@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.616602@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.622416@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.630210@1] usbcore: registered new interface driver usbhid [ 1.634112@1] usbhid: USB HID core driver [ 1.638370@2] ashmem: initialized [ 1.641837@1] logger: created 512K log 'log_main' [ 1.646355@2] logger: created 1K log 'log_events' [ 1.651081@1] logger: created 1K log 'log_radio' [ 1.655744@2] logger: created 16K log 'log_system' [ 1.660349@2] exFAT: Version 1.3.0 [ 1.665647@2] ff803000.serial: clock gate not found [ 1.668688@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008399000 [ 1.675898@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.690860@2] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 1.693446@2] console [ttyS0] enabled [ 1.693446@2] console [ttyS0] enabled [ 1.700655@2] bootconsole [aml_uart0] disabled [ 1.700655@2] bootconsole [aml_uart0] disabled [ 1.710167@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800839b000 [ 1.716609@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 1.726889@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083be000 [ 1.736709@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.743242@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083c2080 [ 1.755604@1] res:0x00000000ff806000 res_start:0x00000000022a2706 [ 1.759699@1] irq = 20 [ 1.762049@1] aml_i2c_slave ff806000.i2c_slave: slave work in interrupt (irq=20) [ 1.770893@1] aml_dma ff63e000.aml_dma: Aml dma [ 1.775265@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.780477@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.786954@1] meson-remote: Driver init [ 1.790922@1] meson-remote: remote_probe [ 1.794518@1] meson-remote ff808040.rc: protocol = 0x1 [ 1.799583@1] meson-remote ff808040.rc: don't find the node [ 1.806144@1] meson-remote ff808040.rc: led_blink = 0 [ 1.811144@1] meson-remote ff808040.rc: don't find the node [ 1.818038@1] meson-remote ff808040.rc: led_blink_frq = 100 [ 1.823683@1] meson-remote ff808040.rc: platform_data irq =19 [ 1.829381@1] meson-remote ff808040.rc: custom_number = 3 [ 1.834704@1] meson-remote ff808040.rc: ptable->map_size = 50 [ 1.840380@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1 [ 1.847541@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04 [ 1.853834@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.859981@1] meson-remote ff808040.rc: ptable->map_size = 53 [ 1.865649@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2 [ 1.872807@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01 [ 1.879103@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.885248@1] meson-remote ff808040.rc: ptable->map_size = 17 [ 1.890920@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3 [ 1.898078@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02 [ 1.904374@1] meson-remote ff808040.rc: ptable->release_delay = 80 [ 1.910503@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0 [ 1.917226@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190 [ 1.923003@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8 [ 1.928782@1] meson-remote ff808040.rc: reg=0x8, val=0x960050 [ 1.934475@1] meson-remote ff808040.rc: reg=0xc, val=0x480028 [ 1.940167@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013 [ 1.946118@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800 [ 1.951983@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00 [ 1.957590@1] meson-remote ff808040.rc: reg=0x20, val=0x0 [ 1.962937@1] meson-remote ff808040.rc: reg=0x24, val=0x0 [ 1.968284@1] meson-remote ff808040.rc: reg=0x28, val=0x0 [ 1.974341@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0 [ 1.981293@2] meson-remote: IR XMP protocol handler initialized [ 1.986950@2] efusekeynum: 4 [ 1.989468@2] efusekeyname: mac offset: 0 size: 6 [ 1.995812@2] efusekeyname: mac_bt offset: 6 size: 6 [ 2.002192@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.008583@2] efusekeyname: usid offset: 18 size: 16 [ 2.015244@1] efuse efuse: probe OK! [ 2.020922@1] ge2d: ge2d_init_module [ 2.022571@1] [tsync_pcr_init]init success. [ 2.027093@2] vout: error: invalid vinfo1. current vmode is not supported [ 2.033547@2] DI: di_module_init ok. [ 2.036615@2] dim:dim_module_init [ 2.039972@2] dim:dim_module_init finish [ 2.043601@2] dil:dil_init. [ 2.046581@2] dil:dil_init ok. [ 2.049422@2] vdin_drv_init: major 241 [ 2.053338@2] vdin_drv_init: vdin driver init done [ 2.057829@2] [viuin..]viuin_init_module viuin module init [ 2.063659@2] [viuin..]viuin_probe probe ok. [ 2.067742@2] amlvid:info: amlvideo_init called[ 2.071802@2] amlvid:info: amlvideo_create_instance called [ 2.077222@2] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.082580@3] amlvideo-000: V4L2 device registered as video10 [ 2.088033@3] amlvid:info: amlvideo_create_instance called [ 2.093443@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 2.098756@1] amlvideo-001: V4L2 device registered as video23 [ 2.104522@1] PPMGRDRV: warn: ppmgr module init func called [ 2.111103@1] videosync_create_instance dev_s ffffffc01c981c00,dev_s->dev ffffffc01da57180 [ 2.117953@1] videosync_create_instance reg videosync.0 [ 2.123368@1] aml_vecm_init:module init [ 2.123369@0] videosync_thread started [ 2.130966@1] amdolby_vision_init:module init [ 2.135228@1] prime_sl module init [ 2.138844@1] amlogic mtd driver init [ 2.142535@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.147771@1] bl mode descrete [ 2.150707@1] fip_copies 4 [ 2.153378@1] fip_size 0x200000 [ 2.156474@1] nand_clk_ctrl 0xffe07000 [ 2.160194@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.165823@1] nand_clk_ctrl 0xffe07000 [ 2.169529@1] nand register base ffffff80083ce800, nand clock register ffffff80083d0000 [ 2.177872@1] plat->aml_nand_device ffffff800a778cf8 [ 2.182388@1] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.188350@1] NAND device id: c2 dc 90 a2 57 3 [ 2.192545@1] NAND device: Manufacturer ID: [ 2.196592@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.203252@1] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.208749@1] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.214271@1] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.220573@1] mtd->oobavail: 0x10 [ 2.224220@0] aml_nand_init 2119: plat-name:bootloader [ 2.228950@0] Creating 1 MTD partitions on "bootloader": [ 2.234200@0] 0x000000000000-0x000000400000 : "bootloader" [ 2.241986@0] bootloader initialized ok [ 2.243424@0] plat->aml_nand_device ffffff800a778cf8 [ 2.248360@0] m3_nand_probe() aml_nand_device ffffff800a778cf8 [ 2.254390@0] NAND device id: c2 dc 90 a2 57 3 [ 2.258523@0] NAND device: Manufacturer ID: [ 2.262575@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 4Gib MX30LF4G28AD) [ 2.269231@0] oob_fill_cnt =32 oob_size =256, bch_bytes =54 [ 2.274734@0] ecc mode:9 ecc_page_num=4 eep_need_oobsize=56 [ 2.280251@0] plane_num=1 writesize=0x1000 ecc.size=0x200 bch_mode=1 [ 2.286557@0] mtd->oobavail: 0x10 [ 2.290027@0] aml_nand_init 2119: plat-name:nandnormal [ 2.294947@0] bbt_start=20 [ 2.297588@0] env_start=24 [ 2.300251@0] key_start=32 [ 2.302934@0] dtb_start=40 [ 2.305607@0] ddr_start=44 [ 2.308275@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.314762@0] get_free_node 43: bitmap=0 [ 2.318202@0] get_free_node 55: bitmap=1 [ 2.322285@0] get_free_node 43: bitmap=1 [ 2.325963@0] get_free_node 55: bitmap=3 [ 2.330047@0] get_free_node 43: bitmap=3 [ 2.333726@0] get_free_node 55: bitmap=7 [ 2.337607@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.344246@0] nbbt free list: [ 2.347179@0] blockN=21, ec=-1, dirty_flag=0 [ 2.351406@0] blockN=22, ec=-1, dirty_flag=0 [ 2.355632@0] blockN=23, ec=-1, dirty_flag=0 [ 2.359859@0] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.365274@0] nbbt valid addr: 500000 [ 2.368477@0] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.374092@0] aml_nand_read_rsv_info:423,read nbbt info at 500000 [ 2.380332@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.386743@0] get_free_node 43: bitmap=7 [ 2.390219@0] get_free_node 55: bitmap=f [ 2.394303@0] get_free_node 43: bitmap=f [ 2.397982@0] get_free_node 55: bitmap=1f [ 2.402151@0] get_free_node 43: bitmap=1f [ 2.405917@0] get_free_node 55: bitmap=3f [ 2.410086@0] get_free_node 43: bitmap=3f [ 2.413852@0] get_free_node 55: bitmap=7f [ 2.418021@0] get_free_node 43: bitmap=7f [ 2.421786@0] get_free_node 55: bitmap=ff [ 2.425956@0] get_free_node 43: bitmap=ff [ 2.429722@0] get_free_node 55: bitmap=1ff [ 2.433978@0] get_free_node 43: bitmap=1ff [ 2.437828@0] get_free_node 55: bitmap=3ff [ 2.441883@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.448522@0] nenv free list: [ 2.451456@0] blockN=25, ec=-1, dirty_flag=0 [ 2.455682@0] blockN=26, ec=-1, dirty_flag=0 [ 2.459908@0] blockN=27, ec=-1, dirty_flag=0 [ 2.464134@0] blockN=28, ec=-1, dirty_flag=0 [ 2.468360@0] blockN=29, ec=-1, dirty_flag=0 [ 2.472587@0] blockN=30, ec=-1, dirty_flag=0 [ 2.476813@0] blockN=31, ec=-1, dirty_flag=0 [ 2.481039@0] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.492778@0] nenv valid addr: 610000 [ 2.492797@0] nkey: info size=0x40000 max_scan_blk=40, start_blk=32 [ 2.497233@0] get_free_node 43: bitmap=3ff [ 2.501077@0] get_free_node 55: bitmap=7ff [ 2.505333@0] get_free_node 43: bitmap=7ff [ 2.509184@0] get_free_node 55: bitmap=fff [ 2.513440@0] get_free_node 43: bitmap=fff [ 2.517291@0] get_free_node 55: bitmap=1fff [ 2.521634@0] get_free_node 43: bitmap=1fff [ 2.525571@0] get_free_node 55: bitmap=3fff [ 2.529913@0] get_free_node 43: bitmap=3fff [ 2.533851@0] get_free_node 55: bitmap=7fff [ 2.538194@0] get_free_node 43: bitmap=7fff [ 2.542131@0] get_free_node 55: bitmap=ffff [ 2.546474@0] get_free_node 43: bitmap=ffff [ 2.550411@0] get_free_node 55: bitmap=1ffff [ 2.554840@0] get_free_node 43: bitmap=1ffff [ 2.558864@0] get_free_node 55: bitmap=3ffff [ 2.563089@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.569730@0] nkey free list: [ 2.572655@0] blockN=32, ec=-1, dirty_flag=0 [ 2.576889@0] blockN=33, ec=-1, dirty_flag=0 [ 2.581114@0] blockN=34, ec=-1, dirty_flag=0 [ 2.585341@0] blockN=35, ec=-1, dirty_flag=0 [ 2.589568@0] blockN=36, ec=-1, dirty_flag=0 [ 2.593794@0] blockN=37, ec=-1, dirty_flag=0 [ 2.598020@0] blockN=38, ec=-1, dirty_flag=0 [ 2.602246@0] blockN=39, ec=-1, dirty_flag=0 [ 2.606473@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.611561@0] nkey valid addr: fffffffffffc0000 [ 2.616046@0] aml_nand_key_check 1251 NO key exist [ 2.620792@0] ndtb: info size=0x40000 max_scan_blk=44, start_blk=40 [ 2.627408@0] get_free_node 43: bitmap=3ffff [ 2.631228@0] get_free_node 55: bitmap=7ffff [ 2.635657@0] get_free_node 43: bitmap=7ffff [ 2.639680@0] get_free_node 55: bitmap=fffff [ 2.644108@0] get_free_node 43: bitmap=fffff [ 2.648142@0] get_free_node 55: bitmap=1fffff [ 2.652446@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.659085@0] ndtb free list: [ 2.662018@0] blockN=41, ec=-1, dirty_flag=0 [ 2.666244@0] blockN=42, ec=-1, dirty_flag=0 [ 2.670470@0] blockN=43, ec=-1, dirty_flag=0 [ 2.674697@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.692697@0] ndtb valid addr: a00000 [ 2.692716@0] nddr: info size=0x40000 max_scan_blk=46, start_blk=44 [ 2.697144@0] get_free_node 43: bitmap=1fffff [ 2.701254@0] get_free_node 55: bitmap=3fffff [ 2.705769@0] get_free_node 43: bitmap=3fffff [ 2.709879@0] get_free_node 55: bitmap=7fffff [ 2.714191@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.720831@0] nddr free list: [ 2.723764@0] blockN=44, ec=-1, dirty_flag=0 [ 2.727990@0] blockN=45, ec=-1, dirty_flag=0 [ 2.732217@0] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.737305@0] nddr valid addr: fffffffffffc0000 [ 2.741791@0] aml_nand_ddr_check 1281 NO ddr exist [ 2.746537@0] tpl: off 16777216, size 8388608 [ 2.812859@0] Creating 7 MTD partitions on "nandnormal": [ 2.812896@0] 0x000001000000-0x000001800000 : "tpl" [ 2.819915@2] 0x000001800000-0x000001a00000 : "misc" [ 2.823837@1] 0x000001a00000-0x000001c00000 : "logo" [ 2.828614@3] 0x000001c00000-0x000002c00000 : "recovery" [ 2.835692@3] 0x000002c00000-0x000003b00000 : "boot" [ 2.840399@3] 0x000003b00000-0x000015300000 : "system" [ 2.879528@3] 0x000015300000-0x000020000000 : "data" [ 2.902925@3] nandnormal initialized ok [ 2.903018@3] aml_ubootenv_init: register env chardev [ 2.906394@3] aml_ubootenv_init: register env chardev OK [ 2.911599@3] amlnf_dtb_init: register dtb cdev [ 2.916126@3] amlnf_dtb_init: register dtd cdev OK [ 2.920665@3] mtd_nand_probe 267 , err = 0 [ 2.925399@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.930994@3] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 2.937812@3] unifykey: storage in base: 0xffffffc005000000 [ 2.942755@3] unifykey: storage out base: 0xffffffc005040000 [ 2.948328@3] unifykey: storage block base: 0xffffffc005080000 [ 2.954108@3] unifykey: probe done! [ 2.958025@3] unifykey: no efuse-version set, use default value: -1 [ 2.963787@3] unifykey: key unify config unifykey-num is 6 [ 2.969245@3] unifykey: key unify fact unifykey-num is 6 [ 2.974466@3] unifykey: unifykey_devno: ee00000 [ 2.979257@3] unifykey: device unifykeys created ok [ 2.983861@3] unifykey: aml_unifykeys_init done! [ 2.988646@3] audio_dsp: [dsp]register dsp to char divece(257) [ 2.994974@3] amlkaraoke init success! [ 2.998172@3] sysled: module init [ 3.001533@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.006484@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.013607@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.020133@3] amlogic rfkill init [ 3.024808@3] dmc_monitor_probe [ 3.026549@3] page_trace_module_init, create sysfs failed [ 3.044223@3] defendkey defendkey: Reserved memory is not enough! [ 3.044694@3] defendkey: probe of defendkey failed with error -22 [ 3.051722@3] usbcore: registered new interface driver snd-usb-audio [ 3.060838@3] asoc debug: aml_audio_controller_probe-130 [ 3.062851@3] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 3.068118@3] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 2, lane_oe_mask_out = 0 [ 3.075909@3] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set [ 3.083079@3] snd_tdm ff642000.audiobus:tdma: aml_tdm_get_pins error! [ 3.089455@3] aml_tdm_platform_probe(), share en = 1[ 3.094230@3] No channel mask node Channel_Mask [ 3.098970@3] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 3.104504@3] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 0, lane_oe_mask_out = 0 [ 3.112452@3] aml_tdm_platform_probe(), share en = 1[ 3.116971@3] No channel mask node Channel_Mask [ 3.121697@3] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 3.127272@3] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 3.135204@3] aml_tdm_platform_probe(), share en = 1[ 3.139734@3] No channel mask node Channel_Mask [ 3.145400@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 13, frddr 16 [ 3.152381@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 14, frddr 17 [ 3.160479@3] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 15, frddr 18 [ 3.170629@3] Register vad [ 3.171540@3] check whether to update sound card init data [ 3.177416@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.184340@3] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 3.191671@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.197269@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 3.204943@3] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 3.212267@3] aml_dai_tdm_probe, failed add snd tdm controls [ 3.218153@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones [ 3.224626@3] master_mode(1), binv(1), finv(0) out_skew(1), in_skew(3) [ 3.231682@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok [ 3.237679@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.244560@3] asoc-aml-card auge_sound: dummy <-> TDM-B mapping ok [ 3.250380@3] master_mode(0), binv(1), finv(1) out_skew(1), in_skew(3) [ 3.257181@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 3.264822@1] input: AML-AUGESOUND Headphones as /devices/platform/auge_sound/sound/card0/input2 [ 3.271949@3] snd_card_add_kcontrols card:ffffffc01ca15018 [ 3.276987@3] effect_v2 is not init [ 3.280401@3] Failed to add VAD controls [ 3.284673@3] GACT probability NOT on [ 3.287947@3] Mirror/redirect action on [ 3.291723@3] u32 classifier [ 3.294553@3] Actions configured [ 3.298095@3] Netfilter messages via NETLINK v0.30. [ 3.303178@3] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 3.309379@3] ctnetlink v0.93: registering with nfnetlink. [ 3.315090@2] xt_time: kernel timezone is -0000 [ 3.319065@2] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.325266@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.330255@2] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.335840@2] Initializing XFRM netlink socket [ 3.340834@2] NET: Registered protocol family 10 [ 3.346025@2] mip6: Mobile IPv6 [ 3.347875@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.353707@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.360743@2] NET: Registered protocol family 17 [ 3.364040@2] NET: Registered protocol family 15 [ 3.368607@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.381726@2] Bluetooth: RFCOMM TTY layer initialized [ 3.386599@2] Bluetooth: RFCOMM socket layer initialized [ 3.391874@2] Bluetooth: RFCOMM ver 1.11 [ 3.395731@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.401159@2] Bluetooth: BNEP filters: protocol multicast [ 3.406511@2] Bluetooth: BNEP socket layer initialized [ 3.411596@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.417638@2] Bluetooth: HIDP socket layer initialized [ 3.422802@2] l2tp_core: L2TP core driver, V2.0 [ 3.427219@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.432120@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.437847@2] l2tp_netlink: L2TP netlink interface [ 3.442609@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.448660@2] l2tp_debugfs: L2TP debugfs support [ 3.453165@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.459776@2] NET: Registered protocol family 35 [ 3.464535@2] Key type dns_resolver registered [ 3.469724@2] Registered swp emulation handler [ 3.473177@2] Registered cp15_barrier emulation handler [ 3.478272@2] Registered setend emulation handler [ 3.482989@2] disable EAS feature [ 3.487042@1] registered taskstats version 1 [ 3.499883@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 4.006118@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.006174@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.014329@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 4.022788@3] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff500000 [ 4.029681@0] hub 1-0:1.0: USB hub found [ 4.032667@0] hub 1-0:1.0: 1 port detected [ 4.037078@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.042302@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.050121@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.059053@3] hub 2-0:1.0: USB hub found [ 4.062191@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.069477@3] usb usb2: Unsupported the hub [ 4.073990@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:23 UTC (1420070423) [ 4.082018@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 4.190503@3] dwc_otg: Core Release: 3.10a [ 4.190600@3] dwc_otg: Setting default values for core params [ 4.194697@3] dwc_otg: curmode: 0, host_only: 0 [ 4.211487@3] dwc_otg: Using Buffer DMA mode [ 4.211509@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 4.215485@3] dwc_otg: Working on port type = SLAVE [ 4.220235@3] dwc_otg: Dedicated Tx FIFOs mode [ 4.227207@3] cpucore_cooling_register, max_cpu_core_num:4 [ 4.236463@0] gxbb_pm: enter meson_pm_probe! [ 4.236502@0] no vddio3v3_en pin[ 4.238171@0] pm-meson aml_pm: Can't get switch_clk81 [ 4.243183@0] gxbb_pm: meson_pm_probe done [ 4.24760[ 4.253827@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 4.259256@0] Freeing unused kernel memory: 5056K /dev/mtd6 is ready now. #[ubiattach /dev/ubi_ctrl -m 6] [ 4.466837@3] ubi0: attaching mtd6 [ 4.995419@3] ubi0: scanning is finished [ 4.999524@2] ubi0: attached mtd6 (name "system", size 280 MiB) [ 4.999805@2] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.006845@2] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.013707@2] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.020767@2] ubi0: good PEBs: 1120, bad PEBs: 0, corrupted PEBs: 0 [ 5.026981@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.034309@2] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1943762580 [ 5.043541@2] ubi0: available PEBs: 0, total reserved PEBs: 1120, PEBs reserved for bad PEB handling: 40 [ 5.052952@1] ubi0: background thread "ubi_bgt0d" started, PID 2003 [ 5.058719@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 2006 UBI device number 0, total 1120 LEBs (284426240 bytes, 271.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) #[ mount -t ubifs /dev/ubi0_0 /mnt ] [ 5.103193@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 5.105153@3] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.115175@3] UBIFS (ubi0:0): FS size: 270712832 bytes (258 MiB, 1066 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs) [ 5.125909@3] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 5.131860@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9C8B7B6B-369F-48EB-94F8-0CC4374354BA, small LPT model [ 5.318202@0] meson_uart ff803000.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 5.379048@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops [ 5.463747@3] ubi1: attaching mtd7 [ 5.790180@3] ubi1: scanning is finished [ 5.794074@2] ubi1: attached mtd7 (name "data", size 173 MiB) [ 5.794195@2] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 5.801204@2] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 5.808091@2] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 5.815155@2] ubi1: good PEBs: 692, bad PEBs: 0, corrupted PEBs: 0 [ 5.821283@2] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.828611@2] ubi1: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1363743239 [ 5.837842@2] ubi1: available PEBs: 0, total reserved PEBs: 692, PEBs reserved for bad PEB handling: 40 [ 5.847165@3] ubi1: background thread "ubi_bgt1d" started, PID 2033 UBI device number 1, total 692 L[ 5.856406@3] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 2037 EBs (175734784 bytes, 167.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 5.880143@0] UBIFS (ubi1:0): recovery needed [ 5.932638@0] UBIFS (ubi1:0): recovery completed [ 5.932795@0] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 5.938981@0] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 5.948976@0] UBIFS (ubi1:0): FS size: 161767424 bytes (154 MiB, 637 LEBs), journal size 8126464 bytes (7 MiB, 32 LEBs) [ 5.959668@0] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.966397@0] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 7385E891-3074-4964-8D08-DA1EE609AAB4, small LPT model /etc/init.d/rc.modules: line 10: depmod: not found /etc/init.d/rcS: line 1: /usr/bin/dbus-launch: not found [ALT Debug] ServiceStart rcS /etc/init.d/S01syslogd Starting syslogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02klogd Starting klogd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S02overlayfs [ALT Debug] ServiceStart rcS /etc/init.d/S02sysctl Running sysctl: OK [ALT Debug] ServiceStart rcS /etc/init.d/S10mdev Starting mdev... OK find: /sys/kernel/slab/L2TP/IPv6: No such file or directory find: /sys/kernel/slab/L2TP/IP: No such file or directory [ALT Debug] ServiceStart rcS /etc/init.d/S20urandom Initializing random number generator: OK Saving random seed: OK [ALT Debug] ServiceStart rcS /etc/init.d/S39reboot [ALT Debug] ServiceStart rcS /etc/init.d/S41inetd ========> start alt reboot monitor Starting inetd: OK [ALT Debug] ServiceStart rcS /etc/init.d/S43sysname [ALT Debug] ServiceStart rcS /etc/init.d/S45asound [ALT Debug] ServiceStart rcS /etc/init.d/S47_fs_alt [ALT Debug] ServiceStart rcS /etc/init.d/S48awe ========> start alt Fs controll [ALT Debug] ServiceStart rcS /etc/init.d/S50sshd Debug FS mount OK !!! ===========> Ready Amp Board <============== current s/w version = 30 start speaker_process..... skip Amp Init because /data/ampinit is not exist in /data Starting sshd: -load: /usr/bin/sk_broadband_speakerproc.awb Audio logging enabled Hardware input channels set to 4 Hardware output channels set to 4 cmd line arg set inputdevice to hw:0,1 cmd line arg set outputdevice to hw:0,2 AudioStream init success AudioStream_open pid:2125, tid:f30d9450 --- 0 [ 6.991497@1] aml_tdm_open OK skip network Init because /sys/class/net/eth0 is not exist [ 7.000189@1] asoc-aml-card auge_sound: tdm prepare capture [ 7.004665@1] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 7.011275@2] aml_tdm_open [ 7.012848@2] Not init audio effects Opened TCP tuning interface on port 15002: Waiting for AWE Server Connection from PC... [ 7.026250@1] cpufreq_interactive: cpufreq_hmp_boost_start() [ 7.030750@1] cpufreq_interactive: no need to active hmp boost! # Audio Stop Callback: Stopping audio stream Audio Start Callback: Starting audio stream [ 7.110257@2] asoc-aml-card auge_sound: tdm prepare capture [ 7.113926@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B The lay[ 7.120570@2] asoc-aml-card auge_sound: tdm capture enable out /usr/bin/sk_broadband_speakerproc.awb loaded succesfully aweOS_layoutGetChannelCount = inputs = 2, outputs = 4 [ 7.169664@2] asoc-aml-card auge_sound: tdm playback enable [ 8.609106@3] asoc-aml-card auge_sound: ASoC: DAPM unknown pin Headphones axg_s420_v03 OK [ 16.960405@0] asoc-aml-card auge_sound: tdm capture stop [ 26.997962@2] asoc-aml-card auge_sound: tdm prepare capture [ 26.998200@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 27.006102@2] asoc-aml-card auge_sound: tdm capture enable [ 27.052480@0] asoc-aml-card auge_sound: tdm capture stop [ 37.237901@2] asoc-aml-card auge_sound: tdm prepare capture [ 37.238142@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 37.245919@2] asoc-aml-card auge_sound: tdm capture enable [ 37.291973@0] asoc-aml-card auge_sound: tdm capture stop [ 47.477892@2] asoc-aml-card auge_sound: tdm prepare capture [ 47.478135@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 47.486048@2] asoc-aml-card auge_sound: tdm capture enable [ 47.532034@0] asoc-aml-card auge_sound: tdm capture stop [ 57.717804@2] asoc-aml-card auge_sound: tdm prepare capture [ 57.718051@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 57.729510@2] asoc-aml-card auge_sound: tdm capture enable [ 57.772763@0] asoc-aml-card auge_sound: tdm capture stop [ 67.957868@2] asoc-aml-card auge_sound: tdm prepare capture [ 67.958115@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 67.967496@2] asoc-aml-card auge_sound: tdm capture enable [ 68.012097@0] asoc-aml-card auge_sound: tdm capture stop [ 78.197792@2] asoc-aml-card auge_sound: tdm prepare capture [ 78.198033@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 78.208882@2] asoc-aml-card auge_sound: tdm capture enable [ 78.252243@0] asoc-aml-card auge_sound: tdm capture stop [ 88.437674@2] asoc-aml-card auge_sound: tdm prepare capture [ 88.437917@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 88.450954@2] asoc-aml-card auge_sound: tdm capture enable [ 88.494216@0] asoc-aml-card auge_sound: tdm capture stop [ 98.677815@2] asoc-aml-card auge_sound: tdm prepare capture [ 98.678060@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 98.688847@2] asoc-aml-card auge_sound: tdm capture enable [ 98.732201@0] asoc-aml-card auge_sound: tdm capture stop [ 108.917304@2] asoc-aml-card auge_sound: tdm prepare capture [ 108.917415@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 108.925920@2] asoc-aml-card auge_sound: tdm capture enable [ 108.971099@0] asoc-aml-card auge_sound: tdm capture stop [ 119.157040@2] asoc-aml-card auge_sound: tdm prepare capture [ 119.157087@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 119.163727@2] asoc-aml-card auge_sound: tdm capture enable [ 119.210842@0] asoc-aml-card auge_sound: tdm capture stop [ 129.397870@2] asoc-aml-card auge_sound: tdm prepare capture [ 129.398132@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 129.404274@2] asoc-aml-card auge_sound: tdm capture enable [ 129.451743@0] asoc-aml-card auge_sound: tdm capture stop [ 139.637883@2] asoc-aml-card auge_sound: tdm prepare capture [ 139.638127@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 139.645781@2] asoc-aml-card auge_sound: tdm capture enable [ 139.691973@0] asoc-aml-card auge_sound: tdm capture stop [ 149.877820@2] asoc-aml-card auge_sound: tdm prepare capture [ 149.878064@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 149.889483@2] asoc-aml-card auge_sound: tdm capture enable [ 149.932554@0] asoc-aml-card auge_sound: tdm capture stop [ 160.117866@2] asoc-aml-card auge_sound: tdm prepare capture [ 160.118114@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 160.128865@2] asoc-aml-card auge_sound: tdm capture enable [ 160.172224@0] asoc-aml-card auge_sound: tdm capture stop [ 170.357794@2] asoc-aml-card auge_sound: tdm prepare capture [ 170.358035@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 170.368776@2] asoc-aml-card auge_sound: tdm capture enable [ 170.412121@0] asoc-aml-card auge_sound: tdm capture stop [ 180.597761@2] asoc-aml-card auge_sound: tdm prepare capture [ 180.598005@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 180.608792@2] asoc-aml-card auge_sound: tdm capture enable [ 180.652170@0] asoc-aml-card auge_sound: tdm capture stop [ 190.837800@2] asoc-aml-card auge_sound: tdm prepare capture [ 190.838046@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 190.849554@2] asoc-aml-card auge_sound: tdm capture enable [ 190.892612@0] asoc-aml-card auge_sound: tdm capture stop [ 201.077808@2] asoc-aml-card auge_sound: tdm prepare capture [ 201.078053@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 201.088033@2] asoc-aml-card auge_sound: tdm capture enable [ 201.132052@0] asoc-aml-card auge_sound: tdm capture stop [ 211.317786@2] asoc-aml-card auge_sound: tdm prepare capture [ 211.318028@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 211.329466@2] asoc-aml-card auge_sound: tdm capture enable [ 211.372528@0] asoc-aml-card auge_sound: tdm capture stop [ 221.557297@2] asoc-aml-card auge_sound: tdm prepare capture [ 221.557411@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 221.565182@2] asoc-aml-card auge_sound: tdm capture enable [ 221.611156@0] asoc-aml-card auge_sound: tdm capture stop [ 231.797053@2] asoc-aml-card auge_sound: tdm prepare capture [ 231.797099@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 231.803321@2] asoc-aml-card auge_sound: tdm capture enable [ 231.850834@0] asoc-aml-card auge_sound: tdm capture stop [ 242.037796@2] asoc-aml-card auge_sound: tdm prepare capture [ 242.038041@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 242.050562@2] asoc-aml-card auge_sound: tdm capture enable [ 242.093691@0] asoc-aml-card auge_sound: tdm capture stop [ 252.277899@2] asoc-aml-card auge_sound: tdm prepare capture [ 252.278140@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 252.290645@2] asoc-aml-card auge_sound: tdm capture enable [ 252.333721@0] asoc-aml-card auge_sound: tdm capture stop [ 262.517837@2] asoc-aml-card auge_sound: tdm prepare capture [ 262.518078@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 262.530464@2] asoc-aml-card auge_sound: tdm capture enable [ 262.573531@0] asoc-aml-card auge_sound: tdm capture stop [ 272.757823@2] asoc-aml-card auge_sound: tdm prepare capture [ 272.758065@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 272.769163@2] asoc-aml-card auge_sound: tdm capture enable [ 272.812423@0] asoc-aml-card auge_sound: tdm capture stop [ 282.997760@2] asoc-aml-card auge_sound: tdm prepare capture [ 282.998096@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 283.009997@2] asoc-aml-card auge_sound: tdm capture enable [ 283.053024@0] asoc-aml-card auge_sound: tdm capture stop [ 293.237823@2] asoc-aml-card auge_sound: tdm prepare capture [ 293.238065@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 293.248810@2] asoc-aml-card auge_sound: tdm capture enable [ 293.292199@0] asoc-aml-card auge_sound: tdm capture stop [ 303.477816@2] asoc-aml-card auge_sound: tdm prepare capture [ 303.478058@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 303.488193@2] asoc-aml-card auge_sound: tdm capture enable [ 303.532139@0] asoc-aml-card auge_sound: tdm capture stop [ 313.717815@2] asoc-aml-card auge_sound: tdm prepare capture [ 313.718061@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 313.728798@2] asoc-aml-card auge_sound: tdm capture enable [ 313.772175@0] asoc-aml-card auge_sound: tdm capture stop [ 323.957824@2] asoc-aml-card auge_sound: tdm prepare capture [ 323.958069@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 323.968180@2] asoc-aml-card auge_sound: tdm capture enable [ 324.012070@0] asoc-aml-card auge_sound: tdm capture stop [ 334.197051@2] asoc-aml-card auge_sound: tdm prepare capture [ 334.197097@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 334.203331@2] asoc-aml-card auge_sound: tdm capture enable [ 334.250813@0] asoc-aml-card auge_sound: tdm capture stop [ 344.437842@2] asoc-aml-card auge_sound: tdm prepare capture [ 344.438096@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 344.447324@2] asoc-aml-card auge_sound: tdm capture enable [ 344.491840@0] asoc-aml-card auge_sound: tdm capture stop [ 354.677817@2] asoc-aml-card auge_sound: tdm prepare capture [ 354.678060@2] aml_dai_tdm_prepare Expected toddr src:TDMIN_B [ 354.688552@2] asoc-aml-card auge_sound: tdm capture enable [ 354.732062@0] asoc-aml-card auge_sound: tdm capture stop